diff options
Diffstat (limited to 'keyboards')
18 files changed, 595 insertions, 0 deletions
diff --git a/keyboards/maartenwut/gh80_3700/config.h b/keyboards/maartenwut/gh80_3700/config.h new file mode 100644 index 000000000..6e0b24547 --- /dev/null +++ b/keyboards/maartenwut/gh80_3700/config.h @@ -0,0 +1,143 @@ +/* Copyright 2020 Maarten Dekkers <maartenwut@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4705 +#define PRODUCT_ID 0x633A +#define DEVICE_VER 0x0001 +#define MANUFACTURER Maartenwut +#define PRODUCT GH80 3700 + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 4 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS {B3,C7,C6,B6,B5,B4} +#define MATRIX_COL_PINS {B0,D7,D6,D4} +#define UNUSED_PINS {} + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +// #define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + +// #define RGB_DI_PIN B2 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 8 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +// Define rotary encoder +#define ENCODERS_PAD_A { F1 } +#define ENCODERS_PAD_B { F4 } diff --git a/keyboards/maartenwut/gh80_3700/gh80_3700.c b/keyboards/maartenwut/gh80_3700/gh80_3700.c new file mode 100644 index 000000000..2c3595e49 --- /dev/null +++ b/keyboards/maartenwut/gh80_3700/gh80_3700.c @@ -0,0 +1,46 @@ +/* Copyright 2020 Maarten Dekkers <maartenwut@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "gh80_3700.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); + led_init_ports(); +} + +void led_init_ports(void) { + setPinOutput(E6); + setPinOutput(B1); + setPinOutput(D0); + setPinOutput(D1); + setPinOutput(F0); + + writePinHigh(E6); + writePinHigh(B1); + writePinHigh(D0); + writePinHigh(D1); + writePinHigh(F0); +} + +bool led_update_kb(led_t led_state) { + if(led_update_user(led_state)) { + writePin(E6, !led_state.num_lock); + } + + return true; +}
\ No newline at end of file diff --git a/keyboards/maartenwut/gh80_3700/gh80_3700.h b/keyboards/maartenwut/gh80_3700/gh80_3700.h new file mode 100644 index 000000000..053885ae3 --- /dev/null +++ b/keyboards/maartenwut/gh80_3700/gh80_3700.h @@ -0,0 +1,63 @@ +/* Copyright 2020 Maarten Dekkers <maartenwut@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +#define LAYOUT_all LAYOUT_ortho_6x4 + +#define LAYOUT_ortho_6x4( \ + k00, k01, k02, k03, \ + k10, k11, k12, k13, \ + k20, k21, k22, k23, \ + k30, k31, k32, k33, \ + k40, k41, k42, k43, \ + k50, k51, k52, k53 \ +) \ +{ \ + { k00, k01, k02, k03 }, \ + { k10, k11, k12, k13 }, \ + { k20, k21, k22, k23 }, \ + { k30, k31, k32, k33 }, \ + { k40, k41, k42, k43 }, \ + { k50, k51, k52, k53 } \ +} + +#define LAYOUT_numpad_6x4( \ + k00, k01, k02, k03, \ + k10, k11, k12, k13, \ + k20, k21, k22, \ + k30, k31, k32, k33, \ + k40, k41, k42, \ + k50, k52, k53 \ +) \ +{ \ + { k00, k01, k02, k03 }, \ + { k10, k11, k12, k13 }, \ + { k20, k21, k22, KC_NO }, \ + { k30, k31, k32, k33 }, \ + { k40, k41, k42, KC_NO }, \ + { k50, KC_NO, k52, k53 } \ +} diff --git a/keyboards/maartenwut/gh80_3700/info.json b/keyboards/maartenwut/gh80_3700/info.json new file mode 100644 index 000000000..128f44ee8 --- /dev/null +++ b/keyboards/maartenwut/gh80_3700/info.json @@ -0,0 +1,72 @@ +{ + "keyboard_name": "GH80-3700", + "url": "https://github.com/Maartenwut/gh80-series/tree/master/GH80-3700", + "maintainer": "Maartenwut", + "width": 4, + "height": 7, + "layouts": { + "LAYOUT_ortho_6x4": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + + {"x":0, "y":2}, + {"x":1, "y":2}, + {"x":2, "y":2}, + {"x":3, "y":2}, + + {"x":0, "y":3}, + {"x":1, "y":3}, + {"x":2, "y":3}, + {"x":3, "y":3}, + + {"x":0, "y":4}, + {"x":1, "y":4}, + {"x":2, "y":4}, + {"x":3, "y":4}, + + {"x":0, "y":5}, + {"x":1, "y":5}, + {"x":2, "y":5}, + {"x":3, "y":5}, + + {"x":0, "y":6}, + {"x":1, "y":6}, + {"x":2, "y":6}, + {"x":3, "y":6} + ] + }, + "LAYOUT_numpad_6x4": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + + {"x":0, "y":2}, + {"x":1, "y":2}, + {"x":2, "y":2}, + {"x":3, "y":2}, + + {"x":0, "y":3}, + {"x":1, "y":3}, + {"x":2, "y":3}, + + {"x":0, "y":4}, + {"x":1, "y":4}, + {"x":2, "y":4}, + {"x":3, "y":3, "h":2}, + + {"x":0, "y":5}, + {"x":1, "y":5}, + {"x":2, "y":5}, + + {"x":0, "y":6, "w":2}, + {"x":2, "y":6}, + {"x":3, "y":5, "h":2} + ] + } + } +} diff --git a/keyboards/maartenwut/gh80_3700/keymaps/default/keymap.c b/keyboards/maartenwut/gh80_3700/keymaps/default/keymap.c new file mode 100644 index 000000000..555036de7 --- /dev/null +++ b/keyboards/maartenwut/gh80_3700/keymaps/default/keymap.c @@ -0,0 +1,26 @@ +/* Copyright 2020 Maarten Dekkers <maartenwut@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_ortho_6x4( + KC_ESC, KC_TAB, KC_EQL, KC_BSPC, + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, KC_PENT, + KC_P0, KC_P0, KC_PDOT, KC_PENT), +}; diff --git a/keyboards/maartenwut/gh80_3700/keymaps/default/readme.md b/keyboards/maartenwut/gh80_3700/keymaps/default/readme.md new file mode 100644 index 000000000..8e1232190 --- /dev/null +++ b/keyboards/maartenwut/gh80_3700/keymaps/default/readme.md @@ -0,0 +1 @@ +This is the default keymap for the GH80-3700. diff --git a/keyboards/maartenwut/gh80_3700/keymaps/ps2/config.h b/keyboards/maartenwut/gh80_3700/keymaps/ps2/config.h new file mode 100644 index 000000000..0d9508060 --- /dev/null +++ b/keyboards/maartenwut/gh80_3700/keymaps/ps2/config.h @@ -0,0 +1,69 @@ +/* Copyright 2020 Maarten Dekkers <maartenwut@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#ifdef PS2_USE_USART +#define PS2_CLOCK_PORT PORTD +#define PS2_CLOCK_PIN PIND +#define PS2_CLOCK_DDR DDRD +#define PS2_CLOCK_BIT 5 +#define PS2_DATA_PORT PORTD +#define PS2_DATA_PIN PIND +#define PS2_DATA_DDR DDRD +#define PS2_DATA_BIT 2 + +/* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */ +/* set DDR of CLOCK as input to be slave */ +#define PS2_USART_INIT() do { \ + PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \ + PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \ + UCSR1C = ((1 << UMSEL10) | \ + (3 << UPM10) | \ + (0 << USBS1) | \ + (3 << UCSZ10) | \ + (0 << UCPOL1)); \ + UCSR1A = 0; \ + UBRR1H = 0; \ + UBRR1L = 0; \ +} while (0) +#define PS2_USART_RX_INT_ON() do { \ + UCSR1B = ((1 << RXCIE1) | \ + (1 << RXEN1)); \ +} while (0) +#define PS2_USART_RX_POLL_ON() do { \ + UCSR1B = (1 << RXEN1); \ +} while (0) +#define PS2_USART_OFF() do { \ + UCSR1C = 0; \ + UCSR1B &= ~((1 << RXEN1) | \ + (1 << TXEN1)); \ +} while (0) +#define PS2_USART_RX_READY (UCSR1A & (1<<RXC1)) +#define PS2_USART_RX_DATA UDR1 +#define PS2_USART_ERROR (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1))) +#define PS2_USART_RX_VECT USART1_RX_vect +#define PS2_MOUSE_ENABLE_SCROLLING +#define PS2_MOUSE_INIT_DELAY 1000 +#define PS2_MOUSE_BTN_LEFT 0 +#define PS2_MOUSE_BTN_RIGHT 1 +#define PS2_MOUSE_BTN_MIDDLE 2 +#define PS2_MOUSE_X_MULTIPLIER 2 +#define PS2_MOUSE_Y_MULTIPLIER 2 +#define PS2_MOUSE_V_MULTIPLIER 1 +#define PS2_MOUSE_SCROLL_BTN_MASK 0 +#define PS2_MOUSE_USE_REMOTE_MODE +#endif diff --git a/keyboards/maartenwut/gh80_3700/keymaps/ps2/keymap.c b/keyboards/maartenwut/gh80_3700/keymaps/ps2/keymap.c new file mode 100644 index 000000000..555036de7 --- /dev/null +++ b/keyboards/maartenwut/gh80_3700/keymaps/ps2/keymap.c @@ -0,0 +1,26 @@ +/* Copyright 2020 Maarten Dekkers <maartenwut@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_ortho_6x4( + KC_ESC, KC_TAB, KC_EQL, KC_BSPC, + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, KC_PENT, + KC_P0, KC_P0, KC_PDOT, KC_PENT), +}; diff --git a/keyboards/maartenwut/gh80_3700/keymaps/ps2/readme.md b/keyboards/maartenwut/gh80_3700/keymaps/ps2/readme.md new file mode 100644 index 000000000..d434753b1 --- /dev/null +++ b/keyboards/maartenwut/gh80_3700/keymaps/ps2/readme.md @@ -0,0 +1 @@ +This is a keymap for the GH80-3700 with PS/2 mouse functionality enabled.
\ No newline at end of file diff --git a/keyboards/maartenwut/gh80_3700/keymaps/ps2/rules.mk b/keyboards/maartenwut/gh80_3700/keymaps/ps2/rules.mk new file mode 100644 index 000000000..c58a93b73 --- /dev/null +++ b/keyboards/maartenwut/gh80_3700/keymaps/ps2/rules.mk @@ -0,0 +1,5 @@ +# Build Options +# change yes to no to disable +# +PS2_MOUSE_ENABLE = yes +PS2_USE_USART = yes diff --git a/keyboards/maartenwut/gh80_3700/keymaps/rgb/config.h b/keyboards/maartenwut/gh80_3700/keymaps/rgb/config.h new file mode 100644 index 000000000..1bc51758c --- /dev/null +++ b/keyboards/maartenwut/gh80_3700/keymaps/rgb/config.h @@ -0,0 +1,21 @@ +/* Copyright 2020 Maarten Dekkers <maartenwut@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#define RGB_DI_PIN B2 +#define RGBLED_NUM 8 +#define RGBLIGHT_ANIMATIONS diff --git a/keyboards/maartenwut/gh80_3700/keymaps/rgb/keymap.c b/keyboards/maartenwut/gh80_3700/keymaps/rgb/keymap.c new file mode 100644 index 000000000..555036de7 --- /dev/null +++ b/keyboards/maartenwut/gh80_3700/keymaps/rgb/keymap.c @@ -0,0 +1,26 @@ +/* Copyright 2020 Maarten Dekkers <maartenwut@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_ortho_6x4( + KC_ESC, KC_TAB, KC_EQL, KC_BSPC, + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, KC_PENT, + KC_P0, KC_P0, KC_PDOT, KC_PENT), +}; diff --git a/keyboards/maartenwut/gh80_3700/keymaps/rgb/readme.md b/keyboards/maartenwut/gh80_3700/keymaps/rgb/readme.md new file mode 100644 index 000000000..cac017f42 --- /dev/null +++ b/keyboards/maartenwut/gh80_3700/keymaps/rgb/readme.md @@ -0,0 +1 @@ +This is a keymap for the GH80-3700 with RGB enabled. diff --git a/keyboards/maartenwut/gh80_3700/keymaps/rgb/rules.mk b/keyboards/maartenwut/gh80_3700/keymaps/rgb/rules.mk new file mode 100644 index 000000000..06d70d581 --- /dev/null +++ b/keyboards/maartenwut/gh80_3700/keymaps/rgb/rules.mk @@ -0,0 +1,4 @@ +# Build Options +# change yes to no to disable +# +RGBLIGHT_ENABLE = yes diff --git a/keyboards/maartenwut/gh80_3700/keymaps/via/keymap.c b/keyboards/maartenwut/gh80_3700/keymaps/via/keymap.c new file mode 100644 index 000000000..58d6ee754 --- /dev/null +++ b/keyboards/maartenwut/gh80_3700/keymaps/via/keymap.c @@ -0,0 +1,50 @@ +/* Copyright 2020 Maarten Dekkers <maartenwut@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_ortho_6x4( + KC_ESC, KC_TAB, KC_EQL, KC_BSPC, + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, KC_PENT, + KC_P0, KC_P0, KC_PDOT, KC_PENT), + +[1] = LAYOUT_ortho_6x4( + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______), + +[2] = LAYOUT_ortho_6x4( + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______), + +[3] = LAYOUT_ortho_6x4( + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______), +}; diff --git a/keyboards/maartenwut/gh80_3700/keymaps/via/rules.mk b/keyboards/maartenwut/gh80_3700/keymaps/via/rules.mk new file mode 100644 index 000000000..36b7ba9cb --- /dev/null +++ b/keyboards/maartenwut/gh80_3700/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/maartenwut/gh80_3700/readme.md b/keyboards/maartenwut/gh80_3700/readme.md new file mode 100644 index 000000000..44f753334 --- /dev/null +++ b/keyboards/maartenwut/gh80_3700/readme.md @@ -0,0 +1,15 @@ +# GH80-3700 + +![GH80-3700](https://i.imgur.com/xMCzb8vl.jpg) + +## Support +* Keyboard Maintainer: [Maarten Dekkers](https://github.com/maartenwut) +* Hardware Supported: GH80-3700 PCB +* Hardware Availability: [maartenwut.com](https://maartenwut.com/product/gh80-3700-numpad-pcb/) + +## Build +Make example for this keyboard (after setting up your build environment): + + make maartenwut/gh80_3700:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file diff --git a/keyboards/maartenwut/gh80_3700/rules.mk b/keyboards/maartenwut/gh80_3700/rules.mk new file mode 100644 index 000000000..01ea4754f --- /dev/null +++ b/keyboards/maartenwut/gh80_3700/rules.mk @@ -0,0 +1,24 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = qmk-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +ENCODER_ENABLE = yes # Enable support for rotary encoders + +LAYOUTS = numpad_6x4 ortho_6x4 |