diff options
Diffstat (limited to 'keyboards/winkeyless/bface')
| -rw-r--r-- | keyboards/winkeyless/bface/README.md | 4 | ||||
| -rw-r--r-- | keyboards/winkeyless/bface/backlight_ps2avrGB.c | 94 | ||||
| -rw-r--r-- | keyboards/winkeyless/bface/backlight_ps2avrGB.h | 35 | ||||
| -rw-r--r-- | keyboards/winkeyless/bface/bface.c | 94 | ||||
| -rw-r--r-- | keyboards/winkeyless/bface/bface.h | 11 | ||||
| -rw-r--r-- | keyboards/winkeyless/bface/config.h | 9 | ||||
| -rw-r--r-- | keyboards/winkeyless/bface/i2c.c | 104 | ||||
| -rw-r--r-- | keyboards/winkeyless/bface/i2c.h | 25 | ||||
| -rw-r--r-- | keyboards/winkeyless/bface/keymaps/p3lim/README.md | 14 | ||||
| -rw-r--r-- | keyboards/winkeyless/bface/keymaps/p3lim/keymap.c | 156 | ||||
| -rw-r--r-- | keyboards/winkeyless/bface/matrix.c | 113 | ||||
| -rw-r--r-- | keyboards/winkeyless/bface/rules.mk | 5 | ||||
| -rw-r--r-- | keyboards/winkeyless/bface/usbconfig.h | 5 |
13 files changed, 254 insertions, 415 deletions
diff --git a/keyboards/winkeyless/bface/README.md b/keyboards/winkeyless/bface/README.md index f1789b04c..da0eb8088 100644 --- a/keyboards/winkeyless/bface/README.md +++ b/keyboards/winkeyless/bface/README.md @@ -14,6 +14,8 @@ Flashing ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. +**Reset Key:** Hold down the key located at K00, commonly programmed as left control while plugging in the keyboard. + Windows: 1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). 2. Place your keyboard into reset. @@ -33,7 +35,7 @@ macOS: 3. Install the following packages: ``` brew install python - brew install pyusb + pip3 install pyusb brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb ``` diff --git a/keyboards/winkeyless/bface/backlight_ps2avrGB.c b/keyboards/winkeyless/bface/backlight_ps2avrGB.c deleted file mode 100644 index c0f642840..000000000 --- a/keyboards/winkeyless/bface/backlight_ps2avrGB.c +++ /dev/null @@ -1,94 +0,0 @@ -/* Copyright 2017 Sebastian Kaim - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#ifdef BACKLIGHT_ENABLE - -#include "backlight_ps2avrGB.h" -#define sbi(reg,bit) reg |= (_BV(bit)) -#define cbi(reg,bit) reg &= (~_BV(bit)) -#define PWM10 WGM10 -#define PWM11 WGM11 -#define COM1x1 COM1B1 -#define OCR1x OCR1B - -void backlight_init_ports(void) -{ -#if BACKLIGHT_ON_STATE == 0 - backlight_off(); -#else - backlight_on(); -#endif - - // setup pwm - // this bitmagic is sourced from the original firmware - /*TCCR1B = ((TCCR1B & ~0x07) | 0x03); - TCNT1H = 0; - TCNT1L = 0; - sbi(TIMSK, TOIE1); - OCR1BH = 0; - OCR1BL = 0; - cbi(TCCR1A,PWM11); - sbi(TCCR1A,PWM10); - sbi(TCCR1A,COM1B1); - cbi(TCCR1A,COM1B0);*/ - ICR1 = 0xFFFF; - - TCCR1A = _BV(COM1x1) | _BV(WGM11); // = 0b00001010; - TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001; - - backlight_init(); -} - -void backlight_set(uint8_t level) -{ - if( level == 0 ) { - backlight_off(); - } - else { - backlight_on(); - /*uint8_t pwm = get_pwm_for_brightness(level); - set_backlight_pwm(pwm); - TCCR1A |= _BV(COM1x1); - OCR1x = (level >= 2) ? 0xFFFF : 0x00FF;*/ - } -} - -#define PWM_MAX 0xFF -uint8_t get_pwm_for_brightness(uint8_t level) -{ - // we need to cast up here to allow multiplication with 0xFF. We could also use floats, but this is probably a lot faster. - uint16_t brightness = (uint16_t)level * (uint16_t)PWM_MAX / (uint16_t)BACKLIGHT_LEVELS; - return (uint8_t)brightness; -} - -void backlight_on(void) -{ - //_SFR_IO8(0x12) |= _BV(0x4); - LED_PIN |= BACKLIGHT_PORT_NUM; -} - -void backlight_off(void) -{ - //_SFR_IO8(0x12) &= ~_BV(0x4); - LED_PIN &= ~BACKLIGHT_PORT_NUM; -} - -void set_backlight_pwm(uint8_t level) { - // this does not work (yet) - //OCR1B = level; -} - -#endif // BACKLIGHT_ENABLE diff --git a/keyboards/winkeyless/bface/backlight_ps2avrGB.h b/keyboards/winkeyless/bface/backlight_ps2avrGB.h deleted file mode 100644 index d5ca90399..000000000 --- a/keyboards/winkeyless/bface/backlight_ps2avrGB.h +++ /dev/null @@ -1,35 +0,0 @@ -/* Copyright 2017 Sebastian Kaim - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - - -#if defined(__AVR__) -#include <avr/pgmspace.h> -#include <avr/io.h> -#include <avr/interrupt.h> -#endif -#include <stddef.h> -#include <stdlib.h> -#include "backlight.h" - -#ifndef PS2AVRGB_BACKLIGHT_H -#define PS2AVRGB_BACKLIGHT_H - -uint8_t get_pwm_for_brightness(uint8_t level); -void set_backlight_pwm(uint8_t level); -void backlight_on(void); -void backlight_off(void); - -#endif diff --git a/keyboards/winkeyless/bface/bface.c b/keyboards/winkeyless/bface/bface.c index 8422a4a40..1c83be4b8 100644 --- a/keyboards/winkeyless/bface/bface.c +++ b/keyboards/winkeyless/bface/bface.c @@ -1,30 +1,23 @@ -/* -Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> -Copyright 2018 Sebastian Kaim <sebb@sebb767.de> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include "bface.h" +/* Copyright 2019 MechMerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ #include "rgblight.h" - -#include <avr/pgmspace.h> - -#include "action_layer.h" -#include "i2c.h" +#include "i2c_master.h" #include "quantum.h" +#ifdef RGBLIGHT_ENABLE extern rgblight_config_t rgblight_config; void rgblight_set(void) { @@ -37,10 +30,59 @@ void rgblight_set(void) { } i2c_init(); - i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM); + i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); +} +#endif + +void matrix_init_kb(void) { +#ifdef RGBLIGHT_ENABLE + if (rgblight_config.enable) { + i2c_init(); + i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); + } +#endif + // call user level keymaps, if any + matrix_init_user(); +} + +void matrix_scan_kb(void) { +#ifdef RGBLIGHT_ENABLE + rgblight_task(); +#endif + matrix_scan_user(); + /* Nothing else for now. */ } __attribute__ ((weak)) void matrix_scan_user(void) { - rgblight_task(); +} + +void backlight_init_ports(void) { + // initialize pins D0, D1, D4 and D6 as output + setPinOutput(D0); + setPinOutput(D1); + setPinOutput(D4); + setPinOutput(D6); + + // turn backlight LEDs on + writePinHigh(D0); + writePinHigh(D1); + writePinHigh(D4); + writePinHigh(D6); +} + +void backlight_set(uint8_t level) { + if (level == 0) { + // turn backlight LEDs off + writePinLow(D0); + writePinLow(D1); + writePinLow(D4); + writePinLow(D6); + } else { + // turn backlight LEDs on + writePinHigh(D0); + writePinHigh(D1); + writePinHigh(D4); + writePinHigh(D6); + } } diff --git a/keyboards/winkeyless/bface/bface.h b/keyboards/winkeyless/bface/bface.h index 62d62f695..f7a3b9521 100644 --- a/keyboards/winkeyless/bface/bface.h +++ b/keyboards/winkeyless/bface/bface.h @@ -16,8 +16,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef KEYMAP_COMMON_H -#define KEYMAP_COMMON_H +#pragma once #include "quantum_keycodes.h" #include "keycode.h" @@ -27,8 +26,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4, \ K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC3, KD3, \ K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KB2, KD2, \ - K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1, \ - K00, K10, K20, K56, K57, KA0, KB0, KC0 \ + K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1, \ + K00, K10, K20, K56, K57, KA0, KB0, KC0 \ ){ \ { K00, K10, K20, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KA0, KB0, KC0, KC_NO, KC_NO }, \ { K01, K11, K21, K31, K41, K51, KC_NO, KC_NO, KC_NO, KC_NO, KA1, KB1, KC_NO, KC_NO, KC_NO }, \ @@ -37,8 +36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. { K04, K14, K24, K34, K44, K54, KC_NO, KC_NO, KC_NO, KC_NO, KA4, KB4, KC4, KC_NO, KE4 }, \ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ { KC_NO, K16, K26, K36, K46, K56, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB6, KC6, KD6, KE6 }, \ - { KC_NO, K17, K27, K37, K47, K57, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB7, KC7, KD7, KE7 } \ + { KC_NO, K17, K27, K37, K47, K57, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB7, KC7, KD7, KE7 } \ } - -#endif diff --git a/keyboards/winkeyless/bface/config.h b/keyboards/winkeyless/bface/config.h index 11ac373c0..7a1fe3335 100644 --- a/keyboards/winkeyless/bface/config.h +++ b/keyboards/winkeyless/bface/config.h @@ -16,8 +16,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #define VENDOR_ID 0x20A0 #define PRODUCT_ID 0x422D @@ -30,6 +29,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROWS 8 #define MATRIX_COLS 15 +// 0 1 2 3 4 5 6 7 8 9 A B C D E +#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 } +#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7} +#define UNUSED_PINS + #define RGBLED_NUM 16 #define RGBLIGHT_ANIMATIONS @@ -43,4 +47,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define BACKLIGHT_PORT_NUM (1 << 4) #endif -#endif diff --git a/keyboards/winkeyless/bface/i2c.c b/keyboards/winkeyless/bface/i2c.c deleted file mode 100644 index c27f3e3d1..000000000 --- a/keyboards/winkeyless/bface/i2c.c +++ /dev/null @@ -1,104 +0,0 @@ -/* -Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include <avr/io.h> -#include <util/twi.h> - -#include "i2c.h" - -void i2c_set_bitrate(uint16_t bitrate_khz) { - uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz); - if (bitrate_div >= 16) { - bitrate_div = (bitrate_div - 16) / 2; - } - TWBR = bitrate_div; -} - -void i2c_init(void) { - // set pull-up resistors on I2C bus pins - PORTC |= 0b11; - - i2c_set_bitrate(400); - - // enable TWI (two-wire interface) - TWCR |= (1 << TWEN); - - // enable TWI interrupt and slave address ACK - TWCR |= (1 << TWIE); - TWCR |= (1 << TWEA); -} - -uint8_t i2c_start(uint8_t address) { - // reset TWI control register - TWCR = 0; - - // begin transmission and wait for it to end - TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN); - while (!(TWCR & (1<<TWINT))); - - // check if the start condition was successfully transmitted - if ((TWSR & 0xF8) != TW_START) { - return 1; - } - - // transmit address and wait - TWDR = address; - TWCR = (1<<TWINT) | (1<<TWEN); - while (!(TWCR & (1<<TWINT))); - - // check if the device has acknowledged the READ / WRITE mode - uint8_t twst = TW_STATUS & 0xF8; - if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) { - return 1; - } - - return 0; -} - -void i2c_stop(void) { - TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); -} - -uint8_t i2c_write(uint8_t data) { - TWDR = data; - - // transmit data and wait - TWCR = (1<<TWINT) | (1<<TWEN); - while (!(TWCR & (1<<TWINT))); - - if ((TWSR & 0xF8) != TW_MT_DATA_ACK) { - return 1; - } - - return 0; -} - -uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) { - if (i2c_start(address)) { - return 1; - } - - for (uint16_t i = 0; i < length; i++) { - if (i2c_write(data[i])) { - return 1; - } - } - - i2c_stop(); - - return 0; -} diff --git a/keyboards/winkeyless/bface/i2c.h b/keyboards/winkeyless/bface/i2c.h deleted file mode 100644 index 27c9d3d05..000000000 --- a/keyboards/winkeyless/bface/i2c.h +++ /dev/null @@ -1,25 +0,0 @@ -/* -Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#ifndef __I2C_H__ -#define __I2C_H__ - -void i2c_init(void); -void i2c_set_bitrate(uint16_t bitrate_khz); -uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length); - -#endif diff --git a/keyboards/winkeyless/bface/keymaps/p3lim/README.md b/keyboards/winkeyless/bface/keymaps/p3lim/README.md new file mode 100644 index 000000000..81f99ec96 --- /dev/null +++ b/keyboards/winkeyless/bface/keymaps/p3lim/README.md @@ -0,0 +1,14 @@ +# p3lim's b.face layout + + + +My layout using the winkeyless b.face X2 PCB. The keys indicated with a gray color was not supported by the layout so a custom one was made. + +### Building & Flashing + +- Hold <kbd>LCTRL</kbd> while connecting to put in flashing mode +- Follow instructions in the main _bface_ directory + +### Layout notes + +The two additional keys were on pins 22+41 and 22+42, C3+B1 and C3+B2, which is mapped to col 10 row 1 and col 10 row 2 in the matrix. diff --git a/keyboards/winkeyless/bface/keymaps/p3lim/keymap.c b/keyboards/winkeyless/bface/keymaps/p3lim/keymap.c new file mode 100644 index 000000000..0ec124529 --- /dev/null +++ b/keyboards/winkeyless/bface/keymaps/p3lim/keymap.c @@ -0,0 +1,156 @@ +/* +Copyright 2019 Adrian L Lange <legal@p3lim.net> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include QMK_KEYBOARD_H +#include "quantum.h" + +#define LAYOUT_p3lim(\ + K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4, \ + K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC3, \ + K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KB2, KC2, KD2, \ + K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1, KC1, \ + K00, K10, K20, K56, K57, KB0, KC0 \ +){ \ + { K00, K10, K20, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB0, KC0, KC_NO, KC_NO }, \ + { K01, K11, K21, K31, K41, K51, KC_NO, KC_NO, KC_NO, KC_NO, KA1, KB1, KC1, KC_NO, KC_NO }, \ + { K02, K12, K22, K32, K42, K52, KC_NO, KC_NO, KC_NO, KC_NO, KA2, KB2, KC2, KD2, KC_NO }, \ + { K03, K13, K23, K33, K43, K53, KC_NO, KC_NO, KC_NO, KC_NO, KA3, KB3, KC3, KC_NO, KC_NO }, \ + { K04, K14, K24, K34, K44, K54, KC_NO, KC_NO, KC_NO, KC_NO, KA4, KB4, KC4, KC_NO, KE4 }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, K16, K26, K36, K46, K56, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB6, KC6, KD6, KE6 }, \ + { KC_NO, K17, K27, K37, K47, K57, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB7, KC7, KD7, KE7 } \ +} + +enum my_keycodes { + C_ESC0 = SAFE_RANGE, // layer 0 esc + C_ESC1 // layer 1 esc +}; + +// use compiler macros for simpler stuff +#define C_NO1 RALT(KC_QUOT) +#define C_NO2 RALT(KC_SCLN) +#define C_NO3 RALT(KC_LBRC) +#define C_KVM1 LCA(KC_1) +#define C_KVM2 LCA(KC_2) +#define C_KVM3 LCA(KC_3) +#define C_KVM4 LCA(KC_4) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* QWERTY + * ,-----------------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | Bkspc | + * |-----------------------------------------------------------------------------------------+ + * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | | + * |---------------------------------------------------------------------------------| Enter | + * | Ctrl | A | S | D | F | G | H | J | K | L | ; | ' | \ | | + * |-----------------------------------------------------------------------------------------+ + * | Shift | Z | X | C | V | B | N | M | , | . | / | Shift | Del | + * |-----------------------------------------------------------------------------------------+ + * | FN1 | Alt | GUI | Space | FN2 | Alt | Ctrl | + * `-----------------------------------------------------------------------------------------' + */ + [0] = LAYOUT_p3lim( + C_ESC0, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_DEL, + MO(1), KC_LALT, KC_LGUI, KC_SPC, MO(2), KC_RGUI, KC_RCTL + ), + + /* FN1 + * ,-----------------------------------------------------------------------------------------. + * | ` | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | | + * |-----------------------------------------------------------------------------------------+ + * | Caps | Home| Up | End | PgUp| | | | | | | | | | + * |---------------------------------------------------------------------------------| | + * | | Left| Down|Right| PgDn| | | | | | | | | | + * |-----------------------------------------------------------------------------------------+ + * | | KVM1| KVM2| KVM3| KVM4| | | | | | | | | + * |-----------------------------------------------------------------------------------------+ + * | | | | | | | | + * `-----------------------------------------------------------------------------------------' + */ + [1] = LAYOUT_p3lim( + C_ESC1, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, + KC_CAPS, KC_HOME, KC_UP, KC_END, KC_PGUP, _______, _______, _______, _______, _______, _______, _______, _______, + _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, C_KVM1, C_KVM2, C_KVM3, C_KVM4, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, KC_NO, _______, _______ + ), + + /* FN2 + * ,-----------------------------------------------------------------------------------------. + * | | | | | | | | | | | | | | | + * |-----------------------------------------------------------------------------------------+ + * | | | | | | | | | | | | Å | | | + * |---------------------------------------------------------------------------------| | + * | | | | | | | | | | | Ø | Æ | | | + * |-----------------------------------------------------------------------------------------+ + * | | | | | | | | | | | | | | + * |-----------------------------------------------------------------------------------------+ + * | | | | | | | | + * `-----------------------------------------------------------------------------------------' + */ + [2] = LAYOUT_p3lim( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, C_NO3, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, C_NO2, C_NO1, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + KC_NO, _______, _______, _______, _______, _______, _______ + ), + /* + [n] = LAYOUT_p3lim( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______ + ), + */ +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record){ + switch(keycode){ + case C_ESC0: // layer 0 + if(record->event.pressed){ + if(get_mods() & MOD_MASK_SHIFT) + register_code(KC_GRAVE); + else + register_code(KC_ESCAPE); + } else { + if(get_mods() & MOD_MASK_SHIFT) + unregister_code(KC_GRAVE); + else + unregister_code(KC_ESCAPE); + } + return false; + case C_ESC1: // layer 1 + if(record->event.pressed){ + if(get_mods() & MOD_MASK_SHIFT) + register_code(KC_ESCAPE); + else + register_code(KC_GRAVE); + } else { + if(get_mods() & MOD_MASK_SHIFT) + unregister_code(KC_ESCAPE); + else + unregister_code(KC_GRAVE); + } + return false; + } + return true; +} diff --git a/keyboards/winkeyless/bface/matrix.c b/keyboards/winkeyless/bface/matrix.c deleted file mode 100644 index b3761a63c..000000000 --- a/keyboards/winkeyless/bface/matrix.c +++ /dev/null @@ -1,113 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -#include <avr/io.h> -#include <util/delay.h> - -#include "matrix.h" - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif - -static uint8_t debouncing = DEBOUNCE; - -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -void matrix_init(void) { - // all outputs for rows high - DDRB = 0xFF; - PORTB = 0xFF; - // all inputs for columns - DDRA = 0x00; - DDRC &= ~(0x111111<<2); - DDRD &= ~(1<<PIND7); - // all columns are pulled-up - PORTA = 0xFF; - PORTC |= (0b111111<<2); - PORTD |= (1<<PIND7); - - // initialize matrix state: all keys off - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - matrix[row] = 0x00; - matrix_debouncing[row] = 0x00; - } - - // activate backlight - //PORTD |= (1 << 4); - //_SFR_IO8(0x09) |= (1 << 4); //_BV(0x94 & 0xF); - // - // this is the code that *should* be executed in quantum.c - _SFR_IO8(0x12) |= _BV(0x4); -} - -void matrix_set_row_status(uint8_t row) { - DDRB = (1 << row); - PORTB = ~(1 << row); -} - -uint8_t bit_reverse(uint8_t x) { - x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa); - x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc); - x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0); - return x; -} - -uint8_t matrix_scan(void) { - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - matrix_set_row_status(row); - _delay_us(5); - - matrix_row_t cols = ( - // cols 0..7, PORTA 0 -> 7 - (~PINA) & 0xFF - ) | ( - // cols 8..13, PORTC 7 -> 0 - bit_reverse((~PINC) & 0xFF) << 8 - ) | ( - // col 14, PORTD 7 - ((~PIND) & (1 << PIND7)) << 7 - ); - - if (matrix_debouncing[row] != cols) { - matrix_debouncing[row] = cols; - debouncing = DEBOUNCE; - } - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = matrix_debouncing[i]; - } - } - } - - matrix_scan_user(); - - return 1; -} - -inline matrix_row_t matrix_get_row(uint8_t row) { - return matrix[row]; -} - -void matrix_print(void) { -} diff --git a/keyboards/winkeyless/bface/rules.mk b/keyboards/winkeyless/bface/rules.mk index 369ccf2ed..b6d172f26 100644 --- a/keyboards/winkeyless/bface/rules.mk +++ b/keyboards/winkeyless/bface/rules.mk @@ -25,7 +25,7 @@ NO_SUSPEND_POWER_DOWN = yes F_CPU = 12000000 # build options -BOOTMAGIC_ENABLE = yes +BOOTMAGIC_ENABLE = no MOUSEKEY_ENABLE = yes EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = no @@ -40,8 +40,7 @@ OPT_DEFS = -DDEBUG_LEVEL=0 OPT_DEFS += -DBOOTLOADER_SIZE=2048 # custom matrix setup -CUSTOM_MATRIX = yes -SRC = matrix.c i2c.c backlight_ps2avrGB.c +SRC = i2c_master.c # programming options PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/winkeyless/bface/usbconfig.h b/keyboards/winkeyless/bface/usbconfig.h index f87922615..192d80d91 100644 --- a/keyboards/winkeyless/bface/usbconfig.h +++ b/keyboards/winkeyless/bface/usbconfig.h @@ -8,8 +8,7 @@ * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $ */ -#ifndef __usbconfig_h_included__ -#define __usbconfig_h_included__ +#pragma once #include "config.h" @@ -392,5 +391,3 @@ section at the end of this file). /* #define USB_INTR_PENDING EIFR */ #define USB_INTR_PENDING_BIT INTF1 #define USB_INTR_VECTOR INT1_vect - -#endif /* __usbconfig_h_included__ */ |