diff options
Diffstat (limited to 'keyboards/plaid')
| -rw-r--r-- | keyboards/plaid/keymaps/default/keymap.c | 195 | ||||
| -rw-r--r-- | keyboards/plaid/keymaps/default/readme.md | 32 | ||||
| -rw-r--r-- | keyboards/plaid/plaid.h | 3 |
3 files changed, 226 insertions, 4 deletions
diff --git a/keyboards/plaid/keymaps/default/keymap.c b/keyboards/plaid/keymaps/default/keymap.c index f27abb0aa..35c22b498 100644 --- a/keyboards/plaid/keymaps/default/keymap.c +++ b/keyboards/plaid/keymaps/default/keymap.c @@ -33,12 +33,44 @@ enum plaid_keycodes { COLEMAK, DVORAK, PLOVER, - EXT_PLV + EXT_PLV, + LED_1, + LED_2, + LED_3, + LED_4, + LED_5, + LED_6, + LED_7, + LED_8, + LED_9, + LED_0 }; #define LOWER MO(_LOWER) #define RAISE MO(_RAISE) +// array of keys considered modifiers for led purposes +const uint16_t modifiers[] = { + KC_LCTL, + KC_RCTL, + KC_LALT, + KC_RALT, + KC_LSFT, + KC_RSFT, + KC_LGUI, + KC_RGUI, + LOWER, + RAISE +}; + +//Setup consts for LED modes +#define LEDMODE_ON 1 //always on +#define LEDMODE_OFF 0 //always off +#define LEDMODE_MODS 2 //On with modifiers +#define LEDMODE_BLINKIN 3 //blinkinlights - % chance toggle on keypress +#define LEDMODE_KEY 4 //On with any keypress, off with key release +#define LEDMODE_ENTER 5 // On with enter key + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Qwerty @@ -152,7 +184,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Adjust (Lower + Raise) * ,-----------------------------------------------------------------------------------. - * | | Reset| | | | | | | | | | Del | + * |Reset | | | | | | | | | | | Del | * |------+------+------+------+------+-------------+------+------+------+------+------| * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover| | * |------+------+------+------+------+------|------+------+------+------+------+------| @@ -162,7 +194,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_ADJUST] = LAYOUT_plaid_grid( - _______, RESET, DEBUG, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_DEL , + RESET,LED_1, LED_2, LED_3, LED_4, LED_5,LED_6, LED_7, LED_8, LED_9, LED_0,KC_DEL , _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______, _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, TERM_ON, TERM_OFF, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ @@ -171,11 +203,100 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; +//Setup config struct for LED +typedef union { + uint32_t raw; + struct { + uint8_t red_mode :8; + uint8_t green_mode :8; + }; +} led_config_t; +led_config_t led_config; + +//Set leds to saved state during powerup +void keyboard_post_init_user(void) { + // Call the post init code. + led_config.raw = eeconfig_read_user(); + + if(led_config.red_mode == LEDMODE_ON) { + writePinHigh(LED_RED); + } + + if(led_config.green_mode == LEDMODE_ON) { + writePinHigh(LED_GREEN); + } +} + +void eeconfig_init_user(void) { // EEPROM is getting reset! + led_config.raw = 0; + led_config.red_mode = LEDMODE_ON; + led_config.green_mode = LEDMODE_MODS; + eeconfig_update_user(led_config.raw); + eeconfig_update_user(led_config.raw); +} + uint32_t layer_state_set_user(uint32_t state) { return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); } +void led_keypress_update(uint8_t led, uint8_t led_mode, uint16_t keycode, keyrecord_t *record) { + switch (led_mode) { + case LEDMODE_MODS: + for (int i=0;i<sizeof(modifiers) / sizeof(modifiers[0]);i++) { + if(keycode==modifiers[i]) { + if (record->event.pressed) { + writePinHigh(led); + } + else { + writePinLow(led); + } + } + } + break; + case LEDMODE_BLINKIN: + if (record->event.pressed) { + if(rand() % 2 == 1) { + if(rand() % 2 == 0) { + writePinLow(led); + } + else { + writePinHigh(led); + } + } + } + break; + case LEDMODE_KEY: + if (record->event.pressed) { + writePinHigh(led); + return; + } + else { + writePinLow(led); + return; + } + break; + case LEDMODE_ENTER: + if (keycode==KC_ENT) { + writePinHigh(led); + } + else { + writePinLow(led); + } + break; + + } +} + bool process_record_user(uint16_t keycode, keyrecord_t *record) { + /* If the either led mode is keypressed based, call the led updater + then let it fall through the keypress handlers. Just to keep + the logic out of this procedure */ + if (led_config.red_mode >= LEDMODE_MODS && led_config.red_mode <= LEDMODE_ENTER) { + led_keypress_update(LED_RED, led_config.red_mode, keycode, record); + } + if (led_config.green_mode >= LEDMODE_MODS && led_config.green_mode <= LEDMODE_ENTER) { + led_keypress_update(LED_GREEN, led_config.green_mode, keycode, record); + } switch (keycode) { case QWERTY: if (record->event.pressed) { @@ -217,6 +338,74 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return false; break; + case LED_1: + if (record->event.pressed) { + if (led_config.red_mode==LEDMODE_ON) { + led_config.red_mode=LEDMODE_OFF; + writePinLow(LED_RED); + } + else { + led_config.red_mode=LEDMODE_ON; + writePinHigh(LED_RED); + } + } + eeconfig_update_user(led_config.raw); + return false; + break; + case LED_2: + if (record->event.pressed) { + if (led_config.green_mode==LEDMODE_ON) { + led_config.green_mode=LEDMODE_OFF; + writePinLow(LED_GREEN); + } + else { + led_config.green_mode=LEDMODE_ON; + writePinHigh(LED_GREEN); + } + } + eeconfig_update_user(led_config.raw); + return false; + break; + case LED_3: + led_config.red_mode=LEDMODE_MODS; + eeconfig_update_user(led_config.raw); + return false; + break; + case LED_4: + led_config.green_mode=LEDMODE_MODS; + eeconfig_update_user(led_config.raw); + return false; + break; + case LED_5: + led_config.red_mode=LEDMODE_BLINKIN; + eeconfig_update_user(led_config.raw); + return false; + break; + case LED_6: + led_config.green_mode=LEDMODE_BLINKIN; + eeconfig_update_user(led_config.raw); + return false; + break; + case LED_7: + led_config.red_mode=LEDMODE_KEY; + eeconfig_update_user(led_config.raw); + return false; + break; + case LED_8: + led_config.green_mode=LEDMODE_KEY; + eeconfig_update_user(led_config.raw); + return false; + break; + case LED_9: + led_config.red_mode=LEDMODE_ENTER; + eeconfig_update_user(led_config.raw); + return false; + break; + case LED_0: + led_config.green_mode=LEDMODE_ENTER; + eeconfig_update_user(led_config.raw); + return false; + break; } return true; } diff --git a/keyboards/plaid/keymaps/default/readme.md b/keyboards/plaid/keymaps/default/readme.md index 6f68e46af..2f491e367 100644 --- a/keyboards/plaid/keymaps/default/readme.md +++ b/keyboards/plaid/keymaps/default/readme.md @@ -1,2 +1,32 @@ # The default keymap for plaid -folk from planck +Original copyright 2019 Takuya Urakawa (dm9records.com) +LED Support added by Richard Sutherland (rich@brickbots.com) + +This layout is based on the Planck layout, and includes an adjust layer (6) +accessible by holding the lower and raise modifiers (MO3 and MO4) together. +The adjustment layer is used to set the behavior of the two LEDs: + +Modifier Mode: + +Activates when any modifier (shift, alt, os, MO) key is held +down. LED turns off when key is release + +Blinkinlights Mode: +Random chance of state change on each keystroke. + +Keypress Mode: +On for any keypress as long as the key is pressed + +Carriage Mode: +Turns on when enter is pressed, turns off when any next key is pressed + +q = Toggle Red LED state, deactivates any other modes +w = Toggle Green LED state, deactivates any other modes +e = Set RED LED to modifier mode +r = Set GREEN LED to modifier mode +t = Set RED LED to Blinkinlights mode +y = set GREEN LED to Blinkinlights mode +u = set RED LED to Keypress mode +i = set GREEN LED to Keypress mode +o = set RED LED to Carriage mode +p = set GREEN LED to Carriage mode diff --git a/keyboards/plaid/plaid.h b/keyboards/plaid/plaid.h index e680c077c..d791cf7c0 100644 --- a/keyboards/plaid/plaid.h +++ b/keyboards/plaid/plaid.h @@ -63,3 +63,6 @@ #define LAYOUT_planck_mit LAYOUT_plaid_mit #define LAYOUT_kc_ortho_4x12 KC_KEYMAP #define KC_LAYOUT_ortho_4x12 KC_KEYMAP + +#define LED_RED C5 +#define LED_GREEN C4 |