diff options
Diffstat (limited to 'keyboards/pearl')
| -rw-r--r-- | keyboards/pearl/config.h | 1 | ||||
| -rw-r--r-- | keyboards/pearl/pearl.c | 52 | ||||
| -rw-r--r-- | keyboards/pearl/readme.md | 43 | ||||
| -rw-r--r-- | keyboards/pearl/rules.mk | 20 | ||||
| -rw-r--r-- | keyboards/pearl/usbconfig.h | 12 |
5 files changed, 16 insertions, 112 deletions
diff --git a/keyboards/pearl/config.h b/keyboards/pearl/config.h index 3dbe5ee03..0ae69e8e2 100644 --- a/keyboards/pearl/config.h +++ b/keyboards/pearl/config.h @@ -21,6 +21,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x0348 +#define DEVICE_VER 0x0200 #define MANUFACTURER Pearl Boards #define PRODUCT Pearl #define DESCRIPTION 40% keyboard diff --git a/keyboards/pearl/pearl.c b/keyboards/pearl/pearl.c index c8cd8a860..093b5fdd9 100644 --- a/keyboards/pearl/pearl.c +++ b/keyboards/pearl/pearl.c @@ -15,49 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include "rgblight.h" -#include "i2c_master.h" -#include "quantum.h" - -#ifdef RGBLIGHT_ENABLE -extern rgblight_config_t rgblight_config; - -void rgblight_set(void) { - if (!rgblight_config.enable) { - for (uint8_t i = 0; i < RGBLED_NUM; i++) { - led[i].r = 0; - led[i].g = 0; - led[i].b = 0; - } - } - - i2c_init(); - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); -} -#endif - -void matrix_init_kb(void) { -#ifdef RGBLIGHT_ENABLE - if (rgblight_config.enable) { - i2c_init(); - i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); - } -#endif - // call user level keymaps, if any - matrix_init_user(); -} - -void matrix_scan_kb(void) { -#ifdef RGBLIGHT_ENABLE - rgblight_task(); -#endif - matrix_scan_user(); - /* Nothing else for now. */ -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} +#include "pearl.h" void backlight_init_ports(void) { // initialize pins D0, D1, D4 and D6 as output @@ -74,17 +32,17 @@ void backlight_init_ports(void) { } void backlight_set(uint8_t level) { - if (level == 0) { + if (level == 0) { // turn backlight LEDs off writePinLow(D0); writePinLow(D1); writePinLow(D4); writePinLow(D6); - } else { + } else { // turn backlight LEDs on writePinHigh(D0); writePinHigh(D1); writePinHigh(D4); writePinHigh(D6); - } -}
\ No newline at end of file + } +} diff --git a/keyboards/pearl/readme.md b/keyboards/pearl/readme.md index c39d86cf3..1f78a5540 100644 --- a/keyboards/pearl/readme.md +++ b/keyboards/pearl/readme.md @@ -3,45 +3,18 @@ Pearl 40% is a keyboard designed by Koobaczech. It uses an Atmel ATMEGA32A MCU. -Keyboard Maintainer: [Ethan Madden](https://github.com/jetpacktuxedo) -Hardware Supported: Pearl -Hardware Availability: [Geekhack Group Buy](https://geekhack.org/index.php?topic=92259.0) +* Keyboard Maintainer: [Ethan Madden](https://github.com/jetpacktuxedo) +* Hardware Supported: Pearl +* Hardware Availability: [Geekhack Group Buy](https://geekhack.org/index.php?topic=92259.0) Make example for this keyboard (after setting up your build environment): make pearl:default -Flashing - -ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. - -**Reset Key:** Hold down the key located at `K00`. - -Windows: -1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -2. Place your keyboard into reset. -3. Press the `Find Device` button and ensure that your keyboard is found. -4. Press the `Open .hex File` button and locate the `.hex` file you created. -5. Press the `Flash Device` button and wait for the process to complete. - -macOS: -1. Install homebrew by typing the following: - ``` - /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" - ``` -2. Install `crosspack-avr`. - ``` - brew cask install crosspack-avr - ``` -3. Install the following packages: - ``` - brew install python3 - pip3 install pyusb - brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - ``` -4. Place your keyboard into reset. -5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. - -**Please Note:** You will need to use the `EEP_RST` keycode first, followed by unplugging/replugging the board to get RGB underglow effects to work. +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) + + make pearl:default:flash + +**Reset Key**: Hold down the key located at *K00*, commonly programmed as *Esc* while plugging in the keyboard. See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/pearl/rules.mk b/keyboards/pearl/rules.mk index eacf8bb2c..79b783e42 100644 --- a/keyboards/pearl/rules.mk +++ b/keyboards/pearl/rules.mk @@ -1,18 +1,3 @@ -# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. - # MCU name MCU = atmega32a @@ -34,9 +19,6 @@ CONSOLE_ENABLE = yes COMMAND_ENABLE = yes BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = yes -RGBLIGHT_CUSTOM_DRIVER = yes +WS2812_DRIVER = i2c OPT_DEFS = -DDEBUG_LEVEL=0 - -# custom matrix setup -SRC = i2c_master.c diff --git a/keyboards/pearl/usbconfig.h b/keyboards/pearl/usbconfig.h index 54a7d20f1..e65d210ac 100644 --- a/keyboards/pearl/usbconfig.h +++ b/keyboards/pearl/usbconfig.h @@ -108,20 +108,10 @@ section at the end of this file). * (e.g. HID), but never want to send any data. This option saves a couple * of bytes in flash memory and the transmit buffers in RAM. */ -#define USB_CFG_INTR_POLL_INTERVAL 1 -/* If you compile a version with endpoint 1 (interrupt-in), this is the poll - * interval. The value is in milliseconds and must not be less than 10 ms for - * low speed devices. - */ #define USB_CFG_IS_SELF_POWERED 0 /* Define this to 1 if the device has its own power supply. Set it to 0 if the * device is powered from the USB bus. */ -#define USB_CFG_MAX_BUS_POWER 500 -/* Set this variable to the maximum USB bus power consumption of your device. - * The value is in milliamperes. [It will be divided by two since USB - * communicates power requirements in units of 2 mA.] - */ #define USB_CFG_IMPLEMENT_FN_WRITE 1 /* Set this to 1 if you want usbFunctionWrite() to be called for control-out * transfers. Set it to 0 if you don't need it and want to save a couple of @@ -237,7 +227,7 @@ section at the end of this file). * with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand * the implications! */ -#define USB_CFG_DEVICE_VERSION 0x00, 0x02 +#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF) /* Version number of the device: Minor number first, then major number. */ #define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' |