diff options
Diffstat (limited to 'keyboards/kbdfans/kbdpad/mk1/readme.md')
| -rw-r--r-- | keyboards/kbdfans/kbdpad/mk1/readme.md | 40 |
1 files changed, 6 insertions, 34 deletions
diff --git a/keyboards/kbdfans/kbdpad/mk1/readme.md b/keyboards/kbdfans/kbdpad/mk1/readme.md index e808d8934..2424d4d4d 100644 --- a/keyboards/kbdfans/kbdpad/mk1/readme.md +++ b/keyboards/kbdfans/kbdpad/mk1/readme.md @@ -1,47 +1,19 @@ # KBDPad MKI -Custom numpad. - -Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) -Hardware Supported: KBDPad MKI -Hardware Availability: [KBDfans](https://kbdfans.com/products/kbdfans-pad-custom-mechanical-keyboard-diy-kit) +Custom numpad. +* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) +* Hardware Supported: KBDPad MKI +* Hardware Availability: [KBDfans](https://kbdfans.com/products/kbdfans-pad-custom-mechanical-keyboard-diy-kit) Make example for this keyboard (after setting up your build environment): make kbdfans/kbdpad/mk1:default -Flashing +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) -ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. + make kbdfans/kbdpad/mk1:default:flash **Reset Key:** Hold down the key located at `K00`, commonly programmed as `0` while plugging in the keyboard. -Windows: -1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). -2. Place your keyboard into reset. -3. Press the `Find Device` button and ensure that your keyboard is found. -4. Press the `Open .hex File` button and locate the `.hex` file you created. -5. Press the `Flash Device` button and wait for the process to complete. - -macOS: -1. Install homebrew by typing the following: - ``` - /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" - ``` -2. Install `crosspack-avr`. - ``` - brew cask install crosspack-avr - ``` -3. Install the following packages: - ``` - brew install python3 - pip3 install pyusb - brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - ``` - -4. Place your keyboard into reset. -5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. - - See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |