aboutsummaryrefslogtreecommitdiffstats
path: root/keyboards/dichotomy/dichotomy.c
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/dichotomy/dichotomy.c')
-rwxr-xr-xkeyboards/dichotomy/dichotomy.c89
1 files changed, 89 insertions, 0 deletions
diff --git a/keyboards/dichotomy/dichotomy.c b/keyboards/dichotomy/dichotomy.c
new file mode 100755
index 000000000..41e12090c
--- /dev/null
+++ b/keyboards/dichotomy/dichotomy.c
@@ -0,0 +1,89 @@
+#include "dichotomy.h"
+
+void uart_init(void) {
+ SERIAL_UART_INIT();
+}
+
+void pointing_device_task(void){
+ /*report_mouse_t currentReport = {};
+ SERIAL_UART_INIT();
+ uint32_t timeout = 0;
+
+ //the m character requests the RF slave to send the mouse report
+ SERIAL_UART_DATA = 'm';
+
+ //trust the external inputs completely, erase old data
+ uint8_t uart_data[5] = {0};
+
+ //there are 10 bytes corresponding to 10 columns, and an end byte
+ for (uint8_t i = 0; i < 5; i++) {
+ //wait for the serial data, timeout if it's been too long
+ //this only happened in testing with a loose wire, but does no
+ //harm to leave it in here
+ while(!SERIAL_UART_RXD_PRESENT){
+ timeout++;
+ if (timeout > 10000){
+ xprintf("\r\nTIMED OUT");
+ break;
+ }
+ }
+ xprintf("\r\nGOT DATA for %d",i);
+ uart_data[i] = SERIAL_UART_DATA;
+ }
+
+ //check for the end packet, bytes 1-4 are movement and scroll
+ //but byte 5 has bits 0-3 for the scroll button state
+ //(1000 if pressed, 0000 if not) and bits 4-7 are always 1
+ //We can use this to verify the report sent properly.
+ if (uart_data[4] == 0x0F || uart_data[4] == 0x8F)
+ {
+ xprintf("\r\nREQUESTED MOUSE, RECEIVED %i, %i, %i, %i, %i",uart_data[0],uart_data[1],uart_data[2],uart_data[3],uart_data[4]);
+ currentReport = pointing_device_get_report();
+ //shifting and transferring the info to the mouse report varaible
+ //mouseReport.x = 127 max -127 min
+ currentReport.x = (int8_t) uart_data[0];
+ //mouseReport.y = 127 max -127 min
+ currentReport.y = (int8_t) uart_data[1];
+ //mouseReport.v = 127 max -127 min (scroll vertical)
+ currentReport.v = (int8_t) uart_data[2];
+ //mouseReport.h = 127 max -127 min (scroll horizontal)
+ currentReport.h = (int8_t) uart_data[3];
+ //mouseReport.buttons = 0x31 max (bitmask for mouse buttons 1-5) 0x00 min
+ //mouse buttons 1 and 2 are handled by the keymap, but not 3
+ if (uart_data[4] == 0x0F) { //then 3 is not pressed
+ currentReport.buttons &= ~MOUSE_BTN3; //MOUSE_BTN3 is def in report.h
+ } else { //3 must be pressed
+ currentReport.buttons |= MOUSE_BTN3;
+ }
+ pointing_device_set_report(currentReport);
+ } else {
+ xprintf("\r\nRequested packet, data 4 was %d",uart_data[4]);
+ }*/
+ pointing_device_send();
+}
+
+void led_init(void) {
+ DDRD |= (1<<1);
+ PORTD |= (1<<1);
+ DDRF |= (1<<4) | (1<<5);
+ PORTF |= (1<<4) | (1<<5);
+}
+
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+ matrix_init_user();
+ uart_init();
+ led_init();
+}
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+ matrix_scan_user();
+}
+
+void led_set_kb(uint8_t usb_led) {
+
+}