2 files changed, 11 insertions, 57 deletions
diff --git a/drivers/avr/ws2812.c b/drivers/avr/ws2812.c
index 0a02c6f7f..5c733c4ab 100644
--- a/drivers/avr/ws2812.c
+++ b/drivers/avr/ws2812.c
@@ -25,13 +25,17 @@
 #include <avr/interrupt.h>
 #include <avr/io.h>
 #include <util/delay.h>
-#include "debug.h"
 
-#if !defined(LED_ARRAY) && defined(RGB_MATRIX_ENABLE)
-// LED color buffer
-LED_TYPE led[DRIVER_LED_TOTAL];
-#    define LED_ARRAY led
-#endif
+/*
+ * Forward declare internal functions
+ *
+ * The functions take a byte-array and send to the data output as WS2812 bitstream.
+ * The length is the number of bytes to send - three per LED.
+ */
+
+void ws2812_sendarray(uint8_t *array, uint16_t length);
+void ws2812_sendarray_mask(uint8_t *array, uint16_t length, uint8_t pinmask);
+
 
 #ifdef RGBW_BB_TWI
 
@@ -135,23 +139,6 @@ unsigned char I2C_Write(unsigned char c) {
 
 #endif
 
-#ifdef RGB_MATRIX_ENABLE
-// Set an led in the buffer to a color
-void inline ws2812_setled(int i, uint8_t r, uint8_t g, uint8_t b) {
-    led[i].r = r;
-    led[i].g = g;
-    led[i].b = b;
-}
-
-void ws2812_setled_all(uint8_t r, uint8_t g, uint8_t b) {
-    for (int i = 0; i < sizeof(led) / sizeof(led[0]); i++) {
-        led[i].r = r;
-        led[i].g = g;
-        led[i].b = b;
-    }
-}
-#endif
-
 // Setleds for standard RGB
 void inline ws2812_setleds(LED_TYPE *ledarray, uint16_t leds) {
     // ws2812_setleds_pin(ledarray,leds, _BV(ws2812_pin));
diff --git a/drivers/avr/ws2812.h b/drivers/avr/ws2812.h
index a9dd89718..9652b94bb 100644
--- a/drivers/avr/ws2812.h
+++ b/drivers/avr/ws2812.h
@@ -20,13 +20,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-#ifndef LIGHT_WS2812_H_
-#define LIGHT_WS2812_H_
-
-#include <avr/io.h>
-#include <avr/interrupt.h>
-//#include "ws2812_config.h"
-//#include "i2cmaster.h"
+#pragma once
 
 #include "quantum/color.h"
 
@@ -42,33 +36,6 @@
  *         - Send out the LED data
  *         - Wait 50�s to reset the LEDs
  */
-#ifdef RGB_MATRIX_ENABLE
-void ws2812_setled(int index, uint8_t r, uint8_t g, uint8_t b);
-void ws2812_setled_all(uint8_t r, uint8_t g, uint8_t b);
-#endif
-
 void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds);
 void ws2812_setleds_pin(LED_TYPE *ledarray, uint16_t number_of_leds, uint8_t pinmask);
 void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds);
-
-/*
- * Old interface / Internal functions
- *
- * The functions take a byte-array and send to the data output as WS2812 bitstream.
- * The length is the number of bytes to send - three per LED.
- */
-
-void ws2812_sendarray(uint8_t *array, uint16_t length);
-void ws2812_sendarray_mask(uint8_t *array, uint16_t length, uint8_t pinmask);
-
-/*
- * Internal defines
- */
-#ifndef CONCAT
-#    define CONCAT(a, b) a##b
-#endif
-#ifndef CONCAT_EXP
-#    define CONCAT_EXP(a, b) CONCAT(a, b)
-#endif
-
-#endif /* LIGHT_WS2812_H_ */