aboutsummaryrefslogtreecommitdiffstats
path: root/docs
diff options
context:
space:
mode:
Diffstat (limited to 'docs')
-rw-r--r--docs/faq_build.md8
-rw-r--r--docs/flashing_bootloadhid.md2
2 files changed, 8 insertions, 2 deletions
diff --git a/docs/faq_build.md b/docs/faq_build.md
index f11cb76aa..023eab01f 100644
--- a/docs/faq_build.md
+++ b/docs/faq_build.md
@@ -47,7 +47,7 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="feed", MODE:="0666"
SUBSYSTEMS=="usb", ATTRS{idVendor}=="1c11", MODE:="0666"
```
-**/etc/udev/rules.d/55-catalina.rules:**
+**/etc/udev/rules.d/55-caterina.rules:**
```
# ModemManager should ignore the following devices
ATTRS{idVendor}=="2a03", ENV{ID_MM_DEVICE_IGNORE}="1"
@@ -69,6 +69,12 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="1eaf", ATTRS{idProduct}=="0003", MODE:="066
SUBSYSTEMS=="usb", ATTRS{idVendor}=="0483", ATTRS{idProduct}=="df11", MODE:="0666"
```
+**/etc/udev/rules.d/57-bootloadhid.rules:**
+```
+# bootloadHID
+SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="05df", MODE:="0666"
+```
+
### Serial device is not detected in bootloader mode on Linux
Make sure your kernel has appropriate support for your device. If your device uses USB ACM, such as
Pro Micro (Atmega32u4), make sure to include `CONFIG_USB_ACM=y`. Other devices may require `USB_SERIAL` and any of its sub options.
diff --git a/docs/flashing_bootloadhid.md b/docs/flashing_bootloadhid.md
index c51d8ce4b..731d92772 100644
--- a/docs/flashing_bootloadhid.md
+++ b/docs/flashing_bootloadhid.md
@@ -13,7 +13,7 @@ General flashing sequence:
## bootloadHID Flashing Target
-Using the QMK installation script, detailed [here](newbs_getting_started.md), the required bootloadHID tools should be automatically installed.
+?> Using the QMK installation script, detailed [here](newbs_getting_started.md), the required bootloadHID tools should be automatically installed.
To flash via the command line, use the target `:bootloadHID` by executing the following command: