aboutsummaryrefslogtreecommitdiffstats
path: root/converter/ascii_usb
diff options
context:
space:
mode:
Diffstat (limited to 'converter/ascii_usb')
-rw-r--r--converter/ascii_usb/Makefile82
-rw-r--r--converter/ascii_usb/README38
-rw-r--r--converter/ascii_usb/config.h70
-rw-r--r--converter/ascii_usb/keymap.c42
-rw-r--r--converter/ascii_usb/led.c25
-rw-r--r--converter/ascii_usb/matrix.c195
6 files changed, 452 insertions, 0 deletions
diff --git a/converter/ascii_usb/Makefile b/converter/ascii_usb/Makefile
new file mode 100644
index 000000000..b9549e38a
--- /dev/null
+++ b/converter/ascii_usb/Makefile
@@ -0,0 +1,82 @@
+# Target file name (without extension).
+TARGET = ascii_usb
+
+# Directory common source filess exist
+TMK_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC = keymap.c \
+ matrix.c \
+ led.c \
+ protocol/serial_uart.c
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162 # Teensy 1.0
+MCU = atmega32u4 # Teensy 2.0
+#MCU = at90usb646 # Teensy++ 1.0
+#MCU = at90usb1286 # Teensy++ 2.0
+
+
+# Processor frequency.
+# Normally the first thing your program should do is set the clock prescaler,
+# so your program will run at the correct speed. You should also set this
+# variable to same clock speed. The _delay_ms() macro uses this, and many
+# examples use this variable to calculate timings. Do not add a "UL" here.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Build Options
+# *Comment out* to disable the options.
+#
+#MOUSEKEY_ENABLE = yes # Mouse keys
+#EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug
+#NKRO_ENABLE = yes # USB Nkey Rollover
+
+
+# Boot Section Size in bytes
+# Teensy halfKay 512
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TMK_DIR)
+
+
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/protocol.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk
diff --git a/converter/ascii_usb/README b/converter/ascii_usb/README
new file mode 100644
index 000000000..02fa064ed
--- /dev/null
+++ b/converter/ascii_usb/README
@@ -0,0 +1,38 @@
+ASCII to USB keyboard protocol converter
+========================================
+This converts serial console terminal into USB keyboard, tested with TRS-80 model 100 TELCOM application.
+Target MCU is ATMega32u4 but other USB capable AVR will also work.
+
+
+Hardware
+--------
+Connect RX, TX and GND to UART pin of AVR. Note that you may need line driver/level shifter like MAX232 to interface high voltage of RS-232C.
+
+
+
+Build Firmware
+--------------
+Configure UART setting and Just use 'make'
+
+ $ cd ascii_usb
+ $ make
+
+Then, load the binary to MCU with your favorite programmer.
+
+
+
+Limitation
+----------
+- This cannot see key up event, you cannot hold a key.
+- Alt, Gui(Win/Mac) modifier key are not available.
+
+
+
+TRS-80 model 100
+----------------
+Use TELCOM program with setting: 19200bps/8bit/odd parity/1stop bit
+To set this configuration push Stat(F3) and input '9801D,10'. Then push Term(F4) to connect.
+
+
+
+
diff --git a/converter/ascii_usb/config.h b/converter/ascii_usb/config.h
new file mode 100644
index 000000000..0908997a5
--- /dev/null
+++ b/converter/ascii_usb/config.h
@@ -0,0 +1,70 @@
+/*
+Copyright 2014 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x5C01
+#define DEVICE_VER 0x0100
+#define MANUFACTURER t.m.k.
+#define PRODUCT ASCII keyboard converter
+#define DESCRIPTION converts Serial Console Terminal into USB keyboard
+
+
+/* matrix size */
+#define MATRIX_ROWS 16
+#define MATRIX_COLS 16
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ host_get_first_key() == KC_BRK \
+)
+
+
+/*
+ * Serial(USART) configuration
+ * asynchronous, positive logic, 19200baud, bit order: LSB first
+ * 1-start bit, 8-data bit, odd parity, 1-stop bit
+ */
+#ifdef __AVR_ATmega32U4__
+ #define SERIAL_UART_BAUD 19200
+ #define SERIAL_UART_DATA UDR1
+ #define SERIAL_UART_UBRR ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
+ #define SERIAL_UART_RXD_VECT USART1_RX_vect
+ #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
+ #define SERIAL_UART_INIT() do { \
+ UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
+ UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8); /* baud rate */ \
+ UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
+ UCSR1B |= (0<<TXCIE1) | (1<<TXEN1); /* TX interrupt, TX: enable */ \
+ UCSR1C |= (1<<UPM11) | (1<<UPM10); /* parity: none(00), even(01), odd(11) */ \
+ sei(); \
+ } while(0)
+#else
+ #error "USART configuration is needed."
+#endif
+
+/* disable action features */
+#define NO_ACTION_LAYER
+#define NO_ACTION_TAPPING
+#define NO_ACTION_ONESHOT
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+
+#endif
diff --git a/converter/ascii_usb/keymap.c b/converter/ascii_usb/keymap.c
new file mode 100644
index 000000000..a0c61ce8d
--- /dev/null
+++ b/converter/ascii_usb/keymap.c
@@ -0,0 +1,42 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/pgmspace.h>
+#include "keycode.h"
+#include "action.h"
+#include "action_macro.h"
+#include "action_util.h"
+#include "util.h"
+#include "print.h"
+#include "keymap.h"
+
+
+// Keymap is not used. See matrix.c.
+
+/* translates key to keycode */
+uint8_t keymap_key_to_keycode(uint8_t layer, keypos_t key)
+{
+ return KC_NO;
+}
+
+/* translates Fn keycode to action */
+action_t keymap_fn_to_action(uint8_t keycode)
+{
+ return (action_t) { .code = ACTION_NO };
+}
diff --git a/converter/ascii_usb/led.c b/converter/ascii_usb/led.c
new file mode 100644
index 000000000..d1c39bc65
--- /dev/null
+++ b/converter/ascii_usb/led.c
@@ -0,0 +1,25 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "stdint.h"
+#include "serial.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+}
diff --git a/converter/ascii_usb/matrix.c b/converter/ascii_usb/matrix.c
new file mode 100644
index 000000000..e1ea8e0ab
--- /dev/null
+++ b/converter/ascii_usb/matrix.c
@@ -0,0 +1,195 @@
+/*
+Copyright 2014 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <avr/io.h>
+#include <util/delay.h>
+#include "print.h"
+#include "util.h"
+#include "matrix.h"
+#include "debug.h"
+#include "action_util.h"
+#include "protocol/serial.h"
+
+
+/*
+ * Not use Matrix.
+ *
+ * ROW: 16(4bits)
+ * COL: 16(4bits)
+ *
+ * 8bit wide
+ * +---------+
+ * 0|00 ... 0F|
+ * 1|08 ... 1F|
+ * :| ... |
+ * :| ... |
+ * E|E0 ... EF|
+ * F|F0 ... FF|
+ * +---------+
+ */
+
+
+inline
+uint8_t matrix_rows(void)
+{
+ return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+ return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+ debug_matrix = true;
+ serial_init();
+
+ debug("init\n");
+ return;
+}
+
+static void type_key(uint16_t keycode)
+{
+ if (keycode == 0) return;
+
+ uint8_t mods = keycode>>8;
+ uint8_t key = keycode&0xFF;
+ if (mods) {
+ add_mods(mods);
+ send_keyboard_report();
+ }
+
+ add_key(key);
+ send_keyboard_report();
+
+ del_key(key);
+ send_keyboard_report();
+
+ if (mods) {
+ del_mods(mods);
+ send_keyboard_report();
+ }
+}
+static uint16_t code2key(uint8_t code)
+{
+ // ASCII to key combination in US laout
+ switch (code) {
+ case 0x01 ... 0x08: // Ctrl-[a-z]
+ return MOD_BIT(KC_LCTRL)<<8 | (KC_A + (code-0x01));
+ case 0x09: return KC_TAB; // TAB(Ctrl-i)
+ case 0x0A ... 0x0C: // Ctrl-[a-z]
+ return MOD_BIT(KC_LCTRL)<<8 | (KC_A + (code-0x01));
+ case 0x0D: return KC_ENTER; // Enter(Ctrl-m)
+ case 0x0E ... 0x1A: // Ctrl-[a-z]
+ return MOD_BIT(KC_LCTRL)<<8 | (KC_A + (code-0x01));
+ case 0x1B: return KC_ESC;
+ case 0x1C: return KC_RIGHT;
+ case 0x1D: return KC_LEFT;
+ case 0x1E: return KC_UP;
+ case 0x1F: return KC_DOWN;
+ case 0x20: return KC_SPACE;
+ case 0x21: return MOD_BIT(KC_LSHIFT)<<8 | KC_1; // !
+ case 0x22: return MOD_BIT(KC_LSHIFT)<<8 | KC_QUOTE; // "
+ case 0x23: return MOD_BIT(KC_LSHIFT)<<8 | KC_3; // #
+ case 0x24: return MOD_BIT(KC_LSHIFT)<<8 | KC_4; // $
+ case 0x25: return MOD_BIT(KC_LSHIFT)<<8 | KC_5; // %
+ case 0x26: return MOD_BIT(KC_LSHIFT)<<8 | KC_7; // &
+ case 0x27: return KC_QUOTE; // '
+ case 0x28: return MOD_BIT(KC_LSHIFT)<<8 | KC_9; // (
+ case 0x29: return MOD_BIT(KC_LSHIFT)<<8 | KC_0; // )
+ case 0x2A: return MOD_BIT(KC_LSHIFT)<<8 | KC_8; // *
+ case 0x2B: return MOD_BIT(KC_LSHIFT)<<8 | KC_EQUAL; // +
+ case 0x2C: return KC_COMMA; // ,
+ case 0x2D: return KC_MINUS; // -
+ case 0x2E: return KC_DOT; // .
+ case 0x2F: return KC_SLASH; // /
+ case 0x30: return KC_0;
+ case 0x31 ... 0x39: // 1-9
+ return KC_1 + (code-0x31);
+ case 0x3A: return MOD_BIT(KC_LSHIFT)<<8 | KC_SCLN; // :
+ case 0x3B: return KC_SCLN; // ;
+ case 0x3C: return MOD_BIT(KC_LSHIFT)<<8 | KC_COMMA; // <
+ case 0x3D: return KC_EQUAL; // =
+ case 0x3E: return MOD_BIT(KC_LSHIFT)<<8 | KC_DOT; // >
+ case 0x3F: return MOD_BIT(KC_LSHIFT)<<8 | KC_SLASH; // ?
+ case 0x40: return MOD_BIT(KC_LSHIFT)<<8 | KC_2; // @
+ case 0x41 ... 0x5A: // A-Z
+ return MOD_BIT(KC_LSHIFT)<<8 | (KC_A + (code-0x41));
+ case 0x5B: return KC_LBRACKET; // [
+ case 0x5C: return KC_BSLASH; //
+ case 0x5D: return KC_RBRACKET; // ]
+ case 0x5E: return MOD_BIT(KC_LSHIFT)<<8 | KC_6; // ^
+ case 0x5F: return MOD_BIT(KC_LSHIFT)<<8 | KC_MINUS; // _
+ case 0x61 ... 0x7A: // a-z
+ return KC_A + (code-0x61);
+ case 0x7B: return MOD_BIT(KC_LSHIFT)<<8 | KC_LBRACKET; // {
+ case 0x7C: return MOD_BIT(KC_LSHIFT)<<8 | KC_BSLASH; // |
+ case 0x7D: return MOD_BIT(KC_LSHIFT)<<8 | KC_RBRACKET; // }
+ case 0x7E: return MOD_BIT(KC_LSHIFT)<<8 | KC_GRAVE; // }
+ case 0x7F: return KC_DELETE; //
+ }
+ return 0;
+}
+
+uint8_t matrix_scan(void)
+{
+ uint16_t code = serial_recv2();
+ if (code == -1) {
+ return 0;
+ }
+
+ print_hex8(code); print(" ");
+
+ // echo back
+ serial_send(code);
+ type_key(code2key(code));
+
+
+ return code;
+}
+
+inline
+bool matrix_has_ghost(void)
+{
+ return false;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+ return false;
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+ return 0;
+}
+
+void matrix_print(void)
+{
+ print("\nr/c 0123456789ABCDEF\n");
+ for (uint8_t row = 0; row < matrix_rows(); row++) {
+ phex(row); print(": ");
+ pbin_reverse(matrix_get_row(row));
+ print("\n");
+ }
+}