diff options
-rw-r--r-- | keyboards/tada68/Makefile | 3 | ||||
-rw-r--r-- | keyboards/tada68/config.h | 97 | ||||
-rw-r--r-- | keyboards/tada68/keymaps/default/Makefile | 21 | ||||
-rw-r--r-- | keyboards/tada68/keymaps/default/keymap.c | 98 | ||||
-rw-r--r-- | keyboards/tada68/keymaps/default/readme.md | 1 | ||||
-rw-r--r-- | keyboards/tada68/readme.md | 4 | ||||
-rw-r--r-- | keyboards/tada68/rules.mk | 66 | ||||
-rw-r--r-- | keyboards/tada68/tada68.c | 30 | ||||
-rw-r--r-- | keyboards/tada68/tada68.h | 43 |
9 files changed, 363 insertions, 0 deletions
diff --git a/keyboards/tada68/Makefile b/keyboards/tada68/Makefile new file mode 100644 index 000000000..4e2a6f00f --- /dev/null +++ b/keyboards/tada68/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/tada68/config.h b/keyboards/tada68/config.h new file mode 100644 index 000000000..5d8757936 --- /dev/null +++ b/keyboards/tada68/config.h @@ -0,0 +1,97 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0003 +#define MANUFACTURER TADA +#define PRODUCT TADA68 +#define DESCRIPTION QMK keyboard firmware for TADA68 with WS2812 support + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +// ROWS: Top to bottom, COLS: Left to right + +#define MATRIX_ROW_PINS {D0,D1,F6,F7,D5} +#define MATRIX_COL_PINS {F0,F1,E6,C7,C6,B7,D4,B1,B0,B5,B4,D7,D6,B3,F4} +#define UNUSED_PINS + +#define BACKLIGHT_PIN B6 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* Backlight configuration + */ +#define BACKLIGHT_LEVELS 4 + +/* Underlight configuration + */ + +/*#define RGB_DI_PIN E2 +#define RGBLIGHT_TIMER +#define RGBLED_NUM 2 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17*/ +//Disabled while I figure out a suitable pin for RGB support. +//I've tried F5, D2, D3, and E2 but it's possible the end of my +//strand is bad. New LEDs on order. + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/tada68/keymaps/default/Makefile b/keyboards/tada68/keymaps/default/Makefile new file mode 100644 index 000000000..2a7ff2779 --- /dev/null +++ b/keyboards/tada68/keymaps/default/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/tada68/keymaps/default/keymap.c b/keyboards/tada68/keymaps/default/keymap.c new file mode 100644 index 000000000..da57c0343 --- /dev/null +++ b/keyboards/tada68/keymaps/default/keymap.c @@ -0,0 +1,98 @@ +#include "tada68.h" + + +// Used for SHIFT_ESC +#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 + +#define _______ KC_TRNS + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,----------------------------------------------------------------. + * |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |~ ` | + * |----------------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ |Del | + * |----------------------------------------------------------------| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return |PgUp| + * |----------------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | Up|PgDn| + * |----------------------------------------------------------------| + * |Ctrl|Win |Alt | Space |Alt| FN|Ctrl|Lef|Dow|Rig | + * `----------------------------------------------------------------' + */ +[_BL] = KEYMAP_ANSI( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,KC_BSLS,KC_DEL, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT,KC_PGUP, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT,KC_UP,KC_PGDN, \ + KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT,MO(_FL),KC_RCTRL, KC_LEFT,KC_DOWN,KC_RGHT), + + /* Keymap _FL: Function Layer + * ,----------------------------------------------------------------. + * | | | | | | | | | | | | | | RESET| | + * |----------------------------------------------------------------| + * | | | | | | | | | | | |BL-|BL+|BL | | + * |----------------------------------------------------------------| + * | | | | | | | | | | | | | | + * |----------------------------------------------------------------| + * | | F1|F2 | F3|F4 | F5| F6| F7| F8| | | | | | + * |----------------------------------------------------------------| + * | | | | | | | | | | | + * `----------------------------------------------------------------' + */ +[_FL] = KEYMAP_ANSI( + #ifdef RGBLIGHT_ENABLE + _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RESET,_______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, BL_DEC,BL_INC, BL_TOGG,_______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______, \ + _______,RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD,_______,_______,_______,_______,_______, \ + _______,_______,_______, _______, _______,_______,_______,_______,_______, _______), + #else + _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RESET,_______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, BL_DEC,BL_INC, BL_TOGG,_______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______,_______, \ + _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \ + _______,_______,_______, _______, _______,_______,_______,_______,_______, _______), + #endif +}; + +/*enum function_id { + //SHIFT_ESC, +}; + +const uint16_t PROGMEM fn_actions[] = { + //[0] = ACTION_FUNCTION(SHIFT_ESC), +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { + static uint8_t shift_esc_shift_mask; + switch (id) { + case SHIFT_ESC: + shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; + if (record->event.pressed) { + if (shift_esc_shift_mask) { + add_key(KC_GRV); + send_keyboard_report(); + } else { + add_key(KC_ESC); + send_keyboard_report(); + } + } else { + if (shift_esc_shift_mask) { + del_key(KC_GRV); + send_keyboard_report(); + } else { + del_key(KC_ESC); + send_keyboard_report(); + } + } + break; + } +}*/ diff --git a/keyboards/tada68/keymaps/default/readme.md b/keyboards/tada68/keymaps/default/readme.md new file mode 100644 index 000000000..36760d6b9 --- /dev/null +++ b/keyboards/tada68/keymaps/default/readme.md @@ -0,0 +1 @@ +# default TADA68 layout diff --git a/keyboards/tada68/readme.md b/keyboards/tada68/readme.md new file mode 100644 index 000000000..552fdea52 --- /dev/null +++ b/keyboards/tada68/readme.md @@ -0,0 +1,4 @@ +TADA68 keyboard firmware +====================== + +TODO: to be updated. diff --git a/keyboards/tada68/rules.mk b/keyboards/tada68/rules.mk new file mode 100644 index 000000000..d8ec42365 --- /dev/null +++ b/keyboards/tada68/rules.mk @@ -0,0 +1,66 @@ + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE ?= no # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/tada68/tada68.c b/keyboards/tada68/tada68.c new file mode 100644 index 000000000..24f89048c --- /dev/null +++ b/keyboards/tada68/tada68.c @@ -0,0 +1,30 @@ +#include "tada68.h" +#include "led.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + matrix_init_user(); + led_init_ports(); +}; + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + matrix_scan_user(); +}; + +void led_init_ports(void) { + // * Set our LED pins as output + DDRB |= (1<<2); +} + +void led_set_kb(uint8_t usb_led) { + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + // Turn capslock on + PORTB &= ~(1<<2); + } else { + // Turn capslock off + PORTB |= (1<<2); + } +} diff --git a/keyboards/tada68/tada68.h b/keyboards/tada68/tada68.h new file mode 100644 index 000000000..d0e027a6f --- /dev/null +++ b/keyboards/tada68/tada68.h @@ -0,0 +1,43 @@ +#ifndef TADA68_H +#define TADA68_H + +#include "quantum.h" + +// readability +#define XXX KC_NO + +/* TADA68 ANSI layout + * ,----------------------------------------------------------------. + * | 00 |01| 02| 03| 04| 05| 06| 07| 08| 09| 0a| 0b| 0c| 0d | 0e | + * |----------------------------------------------------------------| + * | 10 | 11| 12| 13| 14| 15| 16| 17| 18| 19| 1a| 1b| 1c| 1d | 1e | + * |----------------------------------------------------------------| + * | 20 | 21| 22| 23| 24| 25| 26| 27| 28| 29| 2a| 2b| 2d | 2e | + * |----------------------------------------------------------------| + * | 30 | 32| 33| 34| 35| 36| 37| 38| 39| 3a| 3b| 3c| 3d| 3e | + * |----------------------------------------------------------------| + * | 40 | 41 | 42 | 45 | 49| 4a| 4b| 4c| 4d| 4e | + * `----------------------------------------------------------------' + */ +// The first section contains all of the arguments +// The second converts the arguments into a two-dimensional array + +#define KEYMAP_ANSI( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, k2e, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e, \ + k40, k41, k42, k45, k49, k4a, k4b, k4c, k4d, k4e \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, XXX, k2d, k2e}, \ + {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k3e}, \ + {k40, k41, k42, XXX, XXX, k45, XXX, XXX, XXX, k49, k4a, k4b, k4c, k4d, k4e} \ +} + +void matrix_init_user(void); +void matrix_scan_user(void); + +#endif |