diff options
author | Stanley Lai <stanleylai.sg@gmail.com> | 2017-02-13 12:36:22 -0800 |
---|---|---|
committer | Stanley Lai <stanleylai.sg@gmail.com> | 2017-02-13 12:36:22 -0800 |
commit | a8eba1bddaf55224939a86bfa4d8e1b53e1d82db (patch) | |
tree | 906568677ed027a807d5e9c0c1bc1c2ae001f0f6 /doc | |
parent | 53ea854462c0b3b2c3c58a36b714ac02f773c74f (diff) | |
parent | fd2925efbac0d7963f3d267dd5264f08a0a4e9dc (diff) | |
download | firmware-a8eba1bddaf55224939a86bfa4d8e1b53e1d82db.tar.gz firmware-a8eba1bddaf55224939a86bfa4d8e1b53e1d82db.tar.bz2 firmware-a8eba1bddaf55224939a86bfa4d8e1b53e1d82db.zip |
Merge remote-tracking branch 'refs/remotes/qmk/master'
Diffstat (limited to 'doc')
-rw-r--r-- | doc/BUILD_GUIDE.md | 4 | ||||
-rwxr-xr-x | doc/CYGWIN_GUIDE.md | 2 | ||||
-rw-r--r-- | doc/HAND_WIRE.md | 6 | ||||
-rw-r--r-- | doc/PCB_GUIDE.md | 6 |
4 files changed, 9 insertions, 9 deletions
diff --git a/doc/BUILD_GUIDE.md b/doc/BUILD_GUIDE.md index 70a4e10fa..175019183 100644 --- a/doc/BUILD_GUIDE.md +++ b/doc/BUILD_GUIDE.md @@ -6,7 +6,7 @@ 1. If you have ever installed WinAVR, uninstall it. 2. Install [MHV AVR Tools](https://infernoembedded.com/sites/default/files/project/MHV_AVR_Tools_20131101.exe). Disable smatch, but **be sure to leave the option to add the tools to the PATH checked**. 3. Install [MinGW](https://sourceforge.net/projects/mingw/files/Installer/mingw-get-setup.exe/download). During installation, uncheck the option to install a graphical user interface. **DO NOT change the default installation folder.** The scripts depend on the default location. -4. Clone this repository. [This link will download it as a zip file, which you'll need to extract.](https://github.com/jackhumbert/qmk_firmware/archive/master.zip) Open the extracted folder in Windows Explorer. +4. Clone this repository. [This link will download it as a zip file, which you'll need to extract.](https://github.com/qmk/qmk_firmware/archive/master.zip) Open the extracted folder in Windows Explorer. 5. Double-click on the 1-setup-path-win batch script to run it. You'll need to accept a User Account Control prompt. Press the spacebar to dismiss the success message in the command prompt that pops up. 6. Right-click on the 2-setup-environment-win batch script, select "Run as administrator", and accept the User Account Control prompt. This part may take a couple of minutes, and you'll need to approve a driver installation, but once it finishes, your environment is complete! 7. Future build commands should be run from the standard Windows command prompt, which you can find by searching for "command prompt" from the start menu or start screen. Ignore the "MHV AVR Shell". @@ -38,7 +38,7 @@ Debian/Ubuntu example: If you have any problems building the firmware, you can try using a tool called Vagrant. It will set up a virtual computer with a known configuration that's ready-to-go for firmware building. OLKB does NOT host the files for this virtual computer. Details on how to set up Vagrant are in the [VAGRANT_GUIDE file](VAGRANT_GUIDE.md). ## Verify Your Installation -1. If you haven't already, obtain this repository ([https://github.com/jackhumbert/qmk_firmware](https://github.com/jackhumbert/qmk_firmware)). You can either download it as a zip file and extract it, or clone it using the command line tool git or the Github Desktop application. +1. If you haven't already, obtain this repository ([https://github.com/qmk/qmk_firmware](https://github.com/qmk/qmk_firmware)). You can either download it as a zip file and extract it, or clone it using the command line tool git or the Github Desktop application. 2. Open up a terminal or command prompt and navigate to the `qmk_firmware` folder using the `cd` command. The command prompt will typically open to your home directory. If, for example, you cloned the repository to your Documents folder, then you would type `cd Documents/qmk_firmware`. If you extracted the file from a zip, then it may be named `qmk_firmware-master` instead. 3. To confirm that you're in the correct location, you can display the contents of your current folder using the `dir` command on Windows, or the `ls` command on Linux or Mac. You should see several files, including `readme.md` and a `quantum` folder. From here, you need to navigate to the appropriate folder under `keyboards/`. For example, if you're building for a Planck, run `cd keyboards/planck`. 4. Once you're in the correct keyboard-specific folder, run the `make` command. This should output a lot of information about the build process. More information about the `make` command can be found below. diff --git a/doc/CYGWIN_GUIDE.md b/doc/CYGWIN_GUIDE.md index 05e7a55f7..05d71961a 100755 --- a/doc/CYGWIN_GUIDE.md +++ b/doc/CYGWIN_GUIDE.md @@ -234,7 +234,7 @@ If you did everything else right. This part should be a snap! Grab the latest so ###Build Planck and Load the Firmware ``` $ cd ~/src -$ git clone https://github.com/jackhumbert/qmk_firmware.git +$ git clone https://github.com/qmk/qmk_firmware.git $ cd qmk_firmware/keyboards/planck $ make ``` diff --git a/doc/HAND_WIRE.md b/doc/HAND_WIRE.md index 18cb7011f..17ef3116f 100644 --- a/doc/HAND_WIRE.md +++ b/doc/HAND_WIRE.md @@ -183,7 +183,7 @@ As you move along, be sure that the Teensy is staying in place - recutting and s From here, you should have a working keyboard with the correct firmware. Before we attach the Teensy permanently to the keyboard, let's quickly get some firmware loaded onto the Teensy so we can test each keyswitch. -To start out, download [the firmware](https://github.com/jackhumbert/qmk_firmware/) - we'll be using my (Jack's) fork of TMK called QMK/Quantum. We'll be doing a lot from the Terminal/command prompt, so get that open, along with a decent text editor like [Sublime Text](http://www.sublimetext.com/). +To start out, download [the firmware](https://github.com/qmk/qmk_firmware/) - we'll be using my (Jack's) fork of TMK called QMK/Quantum. We'll be doing a lot from the Terminal/command prompt, so get that open, along with a decent text editor like [Sublime Text](http://www.sublimetext.com/). The first thing we're going to do is create a new project using the script in the root directory of the firmware. In your terminal, run this command with `<project_name>` replaced by the name of your project - it'll need to be different from any other project in the `keyboards/` folder: @@ -276,7 +276,7 @@ This can be accomplished by using the following `keymaps` definition: ), }; -Note that the layout of the keycodes is similar to the physical layout of our keyboard - this make it much easier to see what's going on. A lot of the keycodes should be fairly obvious, but for a full list of them, check out [tmk_code/doc/keycode.txt](https://github.com/jackhumbert/qmk_firmware/blob/master/tmk_core/doc/keycode.txt) - there are also a lot of aliases to condense your keymap file. +Note that the layout of the keycodes is similar to the physical layout of our keyboard - this make it much easier to see what's going on. A lot of the keycodes should be fairly obvious, but for a full list of them, check out [tmk_code/doc/keycode.txt](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/doc/keycode.txt) - there are also a lot of aliases to condense your keymap file. It's also important to use the `KEYMAP` function we defined earlier - this is what allows the firmware to associate our intended readable keymap with the actual wiring. @@ -306,7 +306,7 @@ If you've done all of these things, keep in mind that sometimes you might have h Now that you have a working board, it's time to get things in their permanent positions. I've often used liberal amounts of hot glue to secure and insulate things, so if that's your style, start spreading that stuff like butter. Otherwise, double-sided tape is always an elegant solution, and electrical tape is a distant second. Due to the nature of these builds, a lot of this part is up to you and how you planned (or didn't plan) things out. -There are a lot of possibilities inside the firmware - check out the [readme](https://github.com/jackhumbert/qmk_firmware/blob/master/readme.md) for a full feature list, and dive into the different project (Planck, Ergodox EZ, etc) to see how people use all of them. You can always stop by [the OLKB subreddit for help!](http://reddit.com/r/olkb) +There are a lot of possibilities inside the firmware - check out the [readme](https://github.com/qmk/qmk_firmware/blob/master/readme.md) for a full feature list, and dive into the different project (Planck, Ergodox EZ, etc) to see how people use all of them. You can always stop by [the OLKB subreddit for help!](http://reddit.com/r/olkb) ## Trouble-shooting compiling diff --git a/doc/PCB_GUIDE.md b/doc/PCB_GUIDE.md index 3fad41dfb..16de71114 100644 --- a/doc/PCB_GUIDE.md +++ b/doc/PCB_GUIDE.md @@ -5,7 +5,7 @@ ### Windows 1. Install [MHV AVR Tools](https://infernoembedded.com/sites/default/files/project/MHV_AVR_Tools_20131101.exe). Disable smatch, but **be sure to leave the option to add the tools to the PATH checked**. 2. Install [MinGW](https://sourceforge.net/projects/mingw/files/Installer/mingw-get-setup.exe/download). During installation, uncheck the option to install a graphical user interface. **DO NOT change the default installation folder.** The scripts depend on the default location. -3. Clone this repository. [This link will download it as a zip file, which you'll need to extract.](https://github.com/jackhumbert/qmk_firmware/archive/master.zip) Open the extracted folder in Windows Explorer. +3. Clone this repository. [This link will download it as a zip file, which you'll need to extract.](https://github.com/qmk/qmk_firmware/archive/master.zip) Open the extracted folder in Windows Explorer. 4. Right-click on the 1-setup-path-win batch script, select "Run as administrator", and accept the User Account Control prompt. Press the spacebar to dismiss the success message in the command prompt that pops up. 5. Right-click on the 2-setup-environment-win batch script, select "Run as administrator", and accept the User Account Control prompt. This part may take a couple of minutes, and you'll need to approve a driver installation, but once it finishes, your environment is complete! @@ -32,7 +32,7 @@ Note that, since it will be directly accessing USB hardware, the `dfu-programmer` program needs to be run as root. ## Verify Your Installation -1. Clone the following repository: https://github.com/jackhumbert/qmk_firmware +1. Clone the following repository: https://github.com/qmk/qmk_firmware 2. Open a Terminal and `cd` into `qmk_firmware/keyboards/planck` 3. Run `make`. This should output a lot of information about the build process. @@ -80,7 +80,7 @@ when trying to 'make dfu' on Windows you need to copy the dfu-programmer.exe to ### Keymap -Unlike the other keymaps, prefixing the keycodes with `KC_` is required. A full list of the keycodes is available [here](https://github.com/jackhumbert/qmk_firmware/blob/master/tmk_core/doc/keycode.txt). For the keycodes available only in the extended keymap, see this [header file](https://github.com/jackhumbert/qmk_firmware/blob/master/quantum/keymap_common.h). +Unlike the other keymaps, prefixing the keycodes with `KC_` is required. A full list of the keycodes is available [here](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/doc/keycode.txt). For the keycodes available only in the extended keymap, see this [header file](https://github.com/qmk/qmk_firmware/blob/master/quantum/keymap_common.h). You can use modifiers with keycodes like this: |