*****************************************************************************
** ChibiOS/RT port for ATxmega128a4u.                                      **
*****************************************************************************

** TARGET **

The demo runs on the mattair Tech MT-DB-X4 board.

** The Demo **

The demo demonstrate the use of the serial driver and print an Hello world
massage with a counter value so that the user can see that differents value
are printed to a connected console. To see the messages, you need to connect
an FTDI converter to USARTC0 (PINC3 is MCU TX and PINC2 is MCU RX).

** Build Procedure **

The demo was built using the GCC AVR toolchain. It should build with WinAVR too!

** Programming procedure **

The board can be flash by using the Makefile and the DFU Programmer tools.
See the make file for more details.