/* ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio. This file is part of ChibiOS/RT. ChibiOS/RT is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. ChibiOS/RT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ #include "ch.h" #include "test.h" /** * @page test_sem Semaphores test * *

Description

* This module implements the test sequence for the @ref semaphores subsystem. * *

Objective

* Objective of the test module is to cover 100% of the @ref semaphores code. * *

Preconditions

* The module requires the following kernel options: * - @p CH_USE_SEMAPHORES * . * In case some of the required options are not enabled then some or all tests * may be skipped. * *

Test Cases

* - @subpage test_sem_001 * - @subpage test_sem_002 * - @subpage test_sem_003 * . * @file testsem.c * @brief Semaphores test source file * @file testsem.h * @brief Semaphores test header file */ #if CH_USE_SEMAPHORES #define ALLOWED_DELAY MS2ST(5) /* * Note, the static initializers are not really required because the * variables are explicitly initialized in each test case. It is done in order * to test the macros. */ static SEMAPHORE_DECL(sem1, 0); /** * @page test_sem_001 Enqueuing test * *

Description

* Five threads with randomized priorities are enqueued to a semaphore then * awakened one at time.
* The test expects that the threads reach their goal in FIFO order or * priority order depending on the CH_USE_SEMAPHORES_PRIORITY configuration * setting. */ static char *sem1_gettest(void) { return "Semaphores, enqueuing"; } static void sem1_setup(void) { chSemInit(&sem1, 0); } static msg_t thread1(void *p) { chSemWait(&sem1); test_emit_token(*(char *)p); return 0; } static void sem1_execute(void) { threads[0] = chThdCreateStatic(wa[0], WA_SIZE, chThdGetPriority()+5, thread1, "A"); threads[1] = chThdCreateStatic(wa[1], WA_SIZE, chThdGetPriority()+1, thread1, "B"); threads[2] = chThdCreateStatic(wa[2], WA_SIZE, chThdGetPriority()+3, thread1, "C"); threads[3] = chThdCreateStatic(wa[3], WA_SIZE, chThdGetPriority()+4, thread1, "D"); threads[4] = chThdCreateStatic(wa[4], WA_SIZE, chThdGetPriority()+2, thread1, "E"); chSemSignal(&sem1); chSemSignal(&sem1); chSemSignal(&sem1); chSemSignal(&sem1); chSemSignal(&sem1); test_wait_threads(); #if CH_USE_SEMAPHORES_PRIORITY test_assert_sequence(1, "ADCEB"); #else test_assert_sequence(1, "ABCDE"); #endif } /** * @page test_sem_002 Timeout test * *

Description

* The three possible semaphore waiting modes (do not wait, wait with timeout, * wait without timeout) are explored.
* The test expects that the semaphore wait function returns the correct value * in each of the above scenario and that the semaphore structure status is * correct after each operation. */ const struct testcase testsem1 = { sem1_gettest, sem1_setup, NULL, sem1_execute }; static char *sem2_gettest(void) { return "Semaphores, timeout"; } static void sem2_setup(void) { chSemInit(&sem1, 0); } static msg_t thread2(void *p) { (void)p; chThdSleepMilliseconds(50); chSysLock(); chSemSignalI(&sem1); /* For coverage reasons */ chSchRescheduleS(); chSysUnlock(); return 0; } static void sem2_execute(void) { int i; systime_t target_time; msg_t msg; /* * Testing special case TIME_IMMEDIATE. */ msg = chSemWaitTimeout(&sem1, TIME_IMMEDIATE); test_assert(1, msg == RDY_TIMEOUT, "wrong wake-up message"); test_assert(2, isempty(&sem1.s_queue), "queue not empty"); test_assert(3, sem1.s_cnt == 0, "counter not zero"); /* * Testing not timeout condition. */ threads[0] = chThdCreateStatic(wa[0], WA_SIZE, chThdGetPriority() - 1, thread2, 0); msg = chSemWaitTimeout(&sem1, MS2ST(500)); test_wait_threads(); test_assert(4, msg == RDY_OK, "wrong wake-up message"); test_assert(5, isempty(&sem1.s_queue), "queue not empty"); test_assert(6, sem1.s_cnt == 0, "counter not zero"); /* * Testing timeout condition. */ test_wait_tick(); target_time = chTimeNow() + MS2ST(5 * 500); for (i = 0; i < 5; i++) { test_emit_token('A' + i); msg = chSemWaitTimeout(&sem1, MS2ST(500)); test_assert(7, msg == RDY_TIMEOUT, "wrong wake-up message"); test_assert(8, isempty(&sem1.s_queue), "queue not empty"); test_assert(9, sem1.s_cnt == 0, "counter not zero"); } test_assert_sequence(10, "ABCDE"); test_assert_time_window(11, target_time, target_time + ALLOWED_DELAY); } const struct testcase testsem2 = { sem2_gettest, sem2_setup, NULL, sem2_execute }; #if CH_USE_SEMSW /** * @page test_sem_003 Atomic signal-wait test * *

Description

* This test case explicitly address the @p chSemWaitSignal() function. A * thread is created that performs a wait and a signal operations. * The tester thread is awakened from an atomic wait/signal operation.
* The test expects that the semaphore wait function returns the correct value * in each of the above scenario and that the semaphore structure status is * correct after each operation. */ static char *sem3_gettest(void) { return "Semaphores, atomic signal-wait"; } static void sem3_setup(void) { chSemInit(&sem1, 0); } static msg_t thread3(void *p) { (void)p; chSemWait(&sem1); chSemSignal(&sem1); return 0; } static void sem3_execute(void) { threads[0] = chThdCreateStatic(wa[0], WA_SIZE, chThdGetPriority()+1, thread3, 0); chSemSignalWait(&sem1, &sem1); test_assert(1, isempty(&sem1.s_queue), "queue not empty"); test_assert(2, sem1.s_cnt == 0, "counter not zero"); chSemSignalWait(&sem1, &sem1); test_assert(3, isempty(&sem1.s_queue), "queue not empty"); test_assert(4, sem1.s_cnt == 0, "counter not zero"); } const struct testcase testsem3 = { sem3_gettest, sem3_setup, NULL, sem3_execute }; #endif /* CH_USE_SEMSW */ #endif /* CH_USE_SEMAPHORES */ /* * Test sequence for semaphores pattern. */ const struct testcase * const patternsem[] = { #if CH_USE_SEMAPHORES &testsem1, &testsem2, #if CH_USE_SEMSW &testsem3, #endif #endif NULL };