/*
    ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

        http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
*/

/**
 * @file    SAMA5D2x/sama_pmc.h
 * @brief   PMC helper driver header.
 *
 * @addtogroup SAMA5D2x_PMC
 * @{
 */

#ifndef _SAMA_PMC_
#define _SAMA_PMC_

/*===========================================================================*/
/* Driver constants.                                                         */
/*===========================================================================*/

/*===========================================================================*/
/* Driver pre-compile time settings.                                         */
/*===========================================================================*/

/*===========================================================================*/
/* Derived constants and error checks.                                       */
/*===========================================================================*/

/*===========================================================================*/
/* Driver data structures and types.                                         */
/*===========================================================================*/

/*===========================================================================*/
/* Driver macros.                                                            */
/*===========================================================================*/

/**
 * @name    Generic PMC operations
 * @{
 */
#if SAMA_HAL_IS_SECURE
/**
 * @brief   Enable write protection on PMC registers block.
 *
 * @notapi
 */
#define pmcEnableWP() {                                                     \
  PMC->PMC_WPMR = PMC_WPMR_WPKEY_PASSWD | PMC_WPMR_WPEN;                    \
}

/**
 * @brief   Disable write protection on PMC registers block.
 *
 * @notapi
 */
#define pmcDisableWP() {                                                    \
  PMC->PMC_WPMR = PMC_WPMR_WPKEY_PASSWD;                                    \
}

/**
 * @brief   Enables the clock of one or more peripheral having ID from 2 to
 *          31.
 *
 * @param[in] mask      PCER0 peripherals mask
 *
 * @api
 */
#define pmcEnablePidLow(mask) {                                             \
  pmcDisableWP();                                                           \
  PMC->PMC_PCER0 = (mask);                                                  \
  pmcEnableWP();                                                            \
}

/**
 * @brief   Disables the clock of one or more peripheral having ID from 2 to
 *          31.
 *
 * @param[in] mask      PCDR0 peripherals mask
 *
 * @api
 */
#define pmcDisablePidLow(mask) {                                            \
  pmcDisableWP();                                                           \
  PMC->PMC_PCDR0 = (mask);                                                  \
  pmcEnableWP();                                                            \
}

/**
 * @brief   Enables the clock of one or more peripheral having ID from 32 to
 *          63.
 *
 * @param[in] mask      PCER1 peripherals mask
 *
 * @api
 */
#define pmcEnablePidHigh(mask) {                                            \
  pmcDisableWP();                                                           \
  PMC->PMC_PCER1 = (mask);                                                  \
  pmcEnableWP();                                                            \
}

/**
 * @brief   Disables the clock of one or more peripheral having ID from 32 to
 *          63.
 *
 * @param[in] mask      PCDR1 peripherals mask
 *
 * @api
 */
#define pmcDisablePidHigh(mask) {                                           \
  pmcDisableWP();                                                           \
  PMC->PMC_PCDR1 = (mask);                                                  \
  pmcEnableWP();                                                            \
}

/**
 * @brief   Enables the generic clock of a peripheral.
 *
 * @param[in] mask      ID peripherals
 *
 * @api
 */
#define pmcEnableGclk(id) {                                                 \
  osalDbgCheck(id < ID_PERIPH_COUNT);                                       \
  pmcDisableWP();                                                           \
  PMC->PMC_PCR = PMC_PCR_PID(id);                                           \
  uint32_t pcr = PMC->PMC_PCR;                                              \
  PMC->PMC_PCR = pcr | PMC_PCR_CMD | PMC_PCR_GCKEN;                         \
  while (!(PMC->PMC_SR & PMC_SR_GCKRDY));                                   \
  pmcEnableWP();                                                            \
}

/**
 * @brief   Disable the generic clock of a peripheral.
 *
 * @param[in] mask      ID peripherals
 *
 * @api
 */
#define pmcDisableGclk(id) {                                                \
  osalDbgCheck(id < ID_PERIPH_COUNT);                                       \
  pmcDisableWP();                                                           \
  PMC->PMC_PCR = PMC_PCR_PID(id);                                           \
  uint32_t pcr = PMC->PMC_PCR;                                              \
  PMC->PMC_PCR = PMC_PCR_CMD | (pcr & ~(PMC_PCR_GCKEN));                    \
  pmcEnableWP();                                                            \
}

/**
 * @brief   Configure the generic clock of a peripheral.
 *
 * @param[in] id           ID peripherals mask
 * @param[in] clock_source Clock source
 * @param[in] div          Divider
 *
 * @api
 */

#define pmcConfigGclk(id, clock_source, div) {                              \
  osalDbgCheck(id < ID_PERIPH_COUNT);                                       \
  osalDbgCheck(!(clock_source & ~PMC_PCR_GCKCSS_Msk));                      \
  osalDbgCheck((div > 0));                                                  \
  osalDbgCheck(!(div << PMC_PCR_GCKDIV_Pos & ~PMC_PCR_GCKDIV_Msk));         \
  pmcDisableGclk(id); 					                                            \
  pmcDisableWP();                                                           \
  PMC->PMC_PCR = PMC_PCR_PID(id);                                           \
  uint32_t pcr = PMC->PMC_PCR & ~(PMC_PCR_GCKCSS_Msk | PMC_PCR_GCKDIV_Msk); \
  PMC->PMC_PCR = pcr | clock_source | PMC_PCR_CMD | PMC_PCR_GCKDIV(div - 1);\
  pmcEnableWP();                                                            \
}

/**
 * @brief   Enable the peripheral clock of a peripheral.
 *
 * @param[in] id        ID peripherals mask
 *
 * @api
 */
#define pmcEnablePeripheral(id) {                                           \
  osalDbgCheck(id < ID_PERIPH_COUNT);                                       \
  pmcDisableWP();                                                           \
  PMC->PMC_PCR = PMC_PCR_PID(id);                                           \
  uint32_t pcr = PMC->PMC_PCR;                                              \
  PMC->PMC_PCR = pcr | PMC_PCR_CMD | PMC_PCR_EN;                            \
  pmcEnableWP();                                                            \
}

/**
 * @brief   Disable the peripheral clock of a peripheral.
 *
 * @param[in] id        ID peripherals mask
 *
 * @api
 */
#define pmcDisablePeripheral(id) {                                          \
  osalDbgCheck(id < ID_PERIPH_COUNT);                                       \
  pmcDisableWP();                                                           \
  PMC->PMC_PCR = PMC_PCR_PID(id);                                           \
  PMC->PMC_PCR = (PMC->PMC_PCR & ~PMC_PCR_EN) | PMC_PCR_CMD;                \
  pmcEnableWP();                                                            \
}


/**
 * @brief   Configure the Audio clock.
 *
 * @param[in] nd        Loop Divider Ratio
 * @param[in] qdpmc     Output Divider Ratio for PMC Clock
 * @param[in] fracr     Fractional Loop Divider Setting
 * @param[in] div       Divider Value
 * @param[in] qaudio    Output Divider Ratio for Pad Clock
 *
 * @api
 */
#define pmcConfigAudio(nd,qdpmc,fracr,div,qdaudio) {                        \
 /* Reset audio clock */                                                    \
 pmcDisableWP();                                                            \
 PMC->PMC_AUDIO_PLL0 &= ~PMC_AUDIO_PLL0_RESETN;                             \
 PMC->PMC_AUDIO_PLL0 |= PMC_AUDIO_PLL0_RESETN;                              \
 /* Configure values */                                                     \
 PMC->PMC_AUDIO_PLL0 = (PMC->PMC_AUDIO_PLL0 &                               \
                       ~PMC_AUDIO_PLL0_PLLFLT_Msk &                         \
                       ~PMC_AUDIO_PLL0_ND_Msk &                             \
                       ~PMC_AUDIO_PLL0_QDPMC_Msk) |                         \
                       PMC_AUDIO_PLL0_PLLFLT_STD |                          \
                       PMC_AUDIO_PLL0_ND(nd) |                              \
                       PMC_AUDIO_PLL0_QDPMC(qdpmc);                         \
 PMC->PMC_AUDIO_PLL1 = (PMC->PMC_AUDIO_PLL1 &                               \
                       ~PMC_AUDIO_PLL1_FRACR_Msk &                          \
                       ~PMC_AUDIO_PLL1_DIV_Msk &                            \
                       ~PMC_AUDIO_PLL1_QDAUDIO_Msk) |                       \
                       PMC_AUDIO_PLL1_FRACR(fracr) |                        \
                       PMC_AUDIO_PLL1_DIV(div)|                             \
                       PMC_AUDIO_PLL1_QDAUDIO(qdaudio);                     \
 pmcEnableWP();                                                             \
}

/**
 * @brief   Enable the audio clock of a audio peripheral.
 *
 * @param[in] pmcClock  If set TRUE enable the PMC clock
 * @param[in] padClock  If set TRUE enable the PAD clock
 *
 * @api
 */
#define pmcEnableAudio(pmcClock, padClock) {                                \
 pmcDisableWP();                                                            \
 uint32_t bits = PMC_AUDIO_PLL0_PLLEN | PMC_AUDIO_PLL0_RESETN;              \
 uint32_t nbits = 0;                                                        \
 if(padClock)                                                               \
   bits |= PMC_AUDIO_PLL0_PADEN;                                            \
 else                                                                       \
   nbits |= PMC_AUDIO_PLL0_PADEN;                                           \
 if(pmcClock)                                                               \
   bits |= PMC_AUDIO_PLL0_PMCEN;                                            \
 else                                                                       \
   nbits |= PMC_AUDIO_PLL0_PMCEN;                                           \
 PMC->PMC_AUDIO_PLL0 = (PMC->PMC_AUDIO_PLL0 & ~nbits) | bits;               \
 /* Wait for the Audio PLL Startup Time (tSTART = 100 usec) */              \
 chSysPolledDelayX(US2RTC(SAMA_PCK, 100));                                  \
 pmcEnableWP();                                                             \
}

/**
 * @brief   Disable the audio clock of a audio peripheral.
 *
 * @api
 */
#define pmcDisableAudio(){                                                  \
 pmcDisableWP();                                                            \
 PMC->PMC_AUDIO_PLL0 &= ~(PMC_AUDIO_PLL0_PLLEN | PMC_AUDIO_PLL0_RESETN |    \
                          PMC_AUDIO_PLL0_PADEN | PMC_AUDIO_PLL0_PMCEN);     \
 pmcEnableWP();                                                             \
}
#else
#include "tsclient.h"

static inline uint32_t readPMCr(uint32_t regOffset)
{
  sec_reg_val_t secr;

  secr.reg = regOffset;
  secr.value = 0;
  (void) tsInvoke0((ts_service_t)TS_FC_PMC_RD,
      (ts_params_area_t)&secr, sizeof secr, TS_TIMEINT_1000_US);
  return secr.value;
}

static inline void writePMCr(uint32_t regOffset, uint32_t v)
{
  sec_reg_val_t secr;

  secr.reg = regOffset;
  secr.value = v;
  (void) tsInvoke0((ts_service_t)TS_FC_PMC_WR,
      (ts_params_area_t)&secr, sizeof secr, TS_TIMEINT_1000_US);
  return;
}

/**
 * @brief   Enables the clock of one or more peripheral having ID from 2 to
 *          31.
 *
 * @param[in] mask      PCER0 peripherals mask
 *
 * @api
 */
#define pmcEnablePidLow(mask) {                                             \
  writePMCr(offsetof(Pmc, PMC_PCER0), (mask));                              \
}

/**
 * @brief   Disables the clock of one or more peripheral having ID from 2 to
 *          31.
 *
 * @param[in] mask      PCDR0 peripherals mask
 *
 * @api
 */
#define pmcDisablePidLow(mask) {                                            \
  writePMCr(offsetof(Pmc, PMC_PCDR0), (mask));                              \
}

/**
 * @brief   Enables the clock of one or more peripheral having ID from 32 to
 *          63.
 *
 * @param[in] mask      PCER1 peripherals mask
 *
 * @api
 */
#define pmcEnablePidHigh(mask) {                                            \
  writePMCr(offsetof(Pmc, PMC_PCER1), (mask));                              \
}

/**
 * @brief   Disables the clock of one or more peripheral having ID from 32 to
 *          63.
 *
 * @param[in] mask      PCDR1 peripherals mask
 *
 * @api
 */
#define pmcDisablePidHigh(mask) {                                           \
  writePMCr(offsetof(Pmc, PMC_PCDR1), (mask));                              \
}

/**
 * @brief   Enables the generic clock of a peripheral.
 *
 * @param[in] mask      ID peripherals
 *
 * @api
 */
#define pmcEnableGclk(id) {                                                 \
  osalDbgCheck(id < ID_PERIPH_COUNT);                                       \
  writePMCr(offsetof(Pmc, PMC_PCR), PMC_PCR_PID(id));                       \
  uint32_t pcr = readPMCr(offsetof(Pmc, PMC_PCR));                          \
  writePMCr(offsetof(Pmc, PMC_PCR), pcr | PMC_PCR_CMD | PMC_PCR_GCKEN);     \
  while (!(readPMCr(offsetof(Pmc, PMC_SR)) & PMC_SR_GCKRDY));               \
}

/**
 * @brief   Disable the generic clock of a peripheral.
 *
 * @param[in] mask      ID peripherals
 *
 * @api
 */
#define pmcDisableGclk(id) {                                                \
  osalDbgCheck(id < ID_PERIPH_COUNT);                                       \
  writePMCr(offsetof(Pmc, PMC_PCR), PMC_PCR_PID(id));                       \
  uint32_t pcr = readPMCr(offsetof(Pmc, PMC_PCR));                          \
  writePMCr(offsetof(Pmc, PMC_PCR), PMC_PCR_CMD | (pcr & ~(PMC_PCR_GCKEN)));\
}

/**
 * @brief   Configure the generic clock of a peripheral.
 *
 * @param[in] id           ID peripherals mask
 * @param[in] clock_source Clock source
 * @param[in] div          Divider
 *
 * @api
 */

#define pmcConfigGclk(id, clock_source, div) {                              \
  osalDbgCheck(id < ID_PERIPH_COUNT);                                       \
  osalDbgCheck(!(clock_source & ~PMC_PCR_GCKCSS_Msk));                      \
  osalDbgCheck((div > 0));                                                  \
  osalDbgCheck(!(div << PMC_PCR_GCKDIV_Pos & ~PMC_PCR_GCKDIV_Msk));         \
  pmcDisableGclk(id);                                                       \
  writePMCr(offsetof(Pmc, PMC_PCR), PMC_PCR_PID(id));                       \
  uint32_t pcr = readPMCr(offsetof(Pmc, PMC_PCR) & ~(PMC_PCR_GCKCSS_Msk | PMC_PCR_GCKDIV_Msk); \
  writePMCr(offsetof(Pmc, PMC_PCR), pcr | clock_source | PMC_PCR_CMD | PMC_PCR_GCKDIV(div - 1));\
}

/**
 * @brief   Enable the peripheral clock of a peripheral.
 *
 * @param[in] id        ID peripherals mask
 *
 * @api
 */
#define pmcEnablePeripheral(id) {                                           \
  osalDbgCheck(id < ID_PERIPH_COUNT);                                       \
  writePMCr(offsetof(Pmc, PMC_PCR), PMC_PCR_PID(id));                       \
  uint32_t pcr = readPMCr(offsetof(Pmc, PMC_PCR));                          \
  writePMCr(offsetof(Pmc, PMC_PCR), pcr | PMC_PCR_CMD | PMC_PCR_EN);        \
}

/**
 * @brief   Disable the peripheral clock of a peripheral.
 *
 * @param[in] id        ID peripherals mask
 *
 * @api
 */
#define pmcDisablePeripheral(id) {                                          \
  osalDbgCheck(id < ID_PERIPH_COUNT);                                       \
  writePMCr(offsetof(Pmc, PMC_PCR), PMC_PCR_PID(id));                       \
  uint32_t pcr = readPMCr(offsetof(Pmc, PMC_PCR));                          \
  writePMCr(offsetof(Pmc, PMC_PCR), (pcr & ~PMC_PCR_EN) | PMC_PCR_CMD);     \
}


/**
 * @brief   Configure the Audio clock.
 *
 * @param[in] nd        Loop Divider Ratio
 * @param[in] qdpmc     Output Divider Ratio for PMC Clock
 * @param[in] fracr     Fractional Loop Divider Setting
 * @param[in] div       Divider Value
 * @param[in] qaudio    Output Divider Ratio for Pad Clock
 *
 * @api
 */
#define pmcConfigAudio(nd,qdpmc,fracr,div,qdaudio) {                        \
 /* Reset audio clock */                                                    \
 writePMCr(offsetof(Pmc, PMC_AUDIO_PLL0), readPMCr(offsetof(Pmc, PMC_AUDIO_PLL0)) & ~PMC_AUDIO_PLL0_RESETN);\
 writePMCr(offsetof(Pmc, PMC_AUDIO_PLL0), readPMCr(offsetof(Pmc, PMC_AUDIO_PLL0)) |  PMC_AUDIO_PLL0_RESETN);\
 /* Configure values */                                                     \
 writePMCr(offsetof(Pmc, PMC_AUDIO_PLL0), (readPMCr(offsetof(Pmc, PMC_AUDIO_PLL0)) &\
                       ~PMC_AUDIO_PLL0_PLLFLT_Msk &                         \
                       ~PMC_AUDIO_PLL0_ND_Msk &                             \
                       ~PMC_AUDIO_PLL0_QDPMC_Msk) |                         \
                       PMC_AUDIO_PLL0_PLLFLT_STD |                          \
                       PMC_AUDIO_PLL0_ND(nd) |                              \
                       PMC_AUDIO_PLL0_QDPMC(qdpmc));                        \
 writePMCr(offsetof(Pmc, PMC_AUDIO_PLL1), (readPMCr(offsetof(Pmc, PMC_AUDIO_PLL1)) &\
                       ~PMC_AUDIO_PLL1_FRACR_Msk &                          \
                       ~PMC_AUDIO_PLL1_DIV_Msk &                            \
                       ~PMC_AUDIO_PLL1_QDAUDIO_Msk) |                       \
                       PMC_AUDIO_PLL1_FRACR(fracr) |                        \
                       PMC_AUDIO_PLL1_DIV(div)|                             \
                       PMC_AUDIO_PLL1_QDAUDIO(qdaudio));                    \
}

/**
 * @brief   Enable the audio clock of a audio peripheral.
 *
 * @param[in] pmcClock  If set TRUE enable the PMC clock
 * @param[in] padClock  If set TRUE enable the PAD clock
 *
 * @api
 */
#define pmcEnableAudio(pmcClock, padClock) {                                \
 uint32_t bits = PMC_AUDIO_PLL0_PLLEN | PMC_AUDIO_PLL0_RESETN;              \
 uint32_t nbits = 0;                                                        \
 if(padClock)                                                               \
   bits |= PMC_AUDIO_PLL0_PADEN;                                            \
 else                                                                       \
   nbits |= PMC_AUDIO_PLL0_PADEN;                                           \
 if(pmcClock)                                                               \
   bits |= PMC_AUDIO_PLL0_PMCEN;                                            \
 else                                                                       \
   nbits |= PMC_AUDIO_PLL0_PMCEN;                                           \
 writePMCr(offsetof(Pmc, PMC_AUDIO_PLL0), (readPMCr(offsetof(Pmc, PMC_AUDIO_PLL0)) & ~nbits) | bits);\
 /* Wait for the Audio PLL Startup Time (tSTART = 100 usec) */              \
 chSysPolledDelayX(US2RTC(SAMA_PCK, 100));                                  \
}

/**
 * @brief   Disable the audio clock of a audio peripheral.
 *
 * @api
 */
#define pmcDisableAudio(){                                                  \
 writePMCr(offsetof(Pmc, PMC_AUDIO_PLL0), readPMCr(offsetof(Pmc, PMC_AUDIO_PLL0)) & \
                        ~(PMC_AUDIO_PLL0_PLLEN | PMC_AUDIO_PLL0_RESETN |    \
                          PMC_AUDIO_PLL0_PADEN | PMC_AUDIO_PLL0_PMCEN));     \
}

#endif

/** @} */

/**
 * @name    ADC peripherals specific PMC operations
 * @{
 */
/**
 * @brief   Enables the PIT peripheral clock.
 *
 * @api
 */
#define pmcEnablePIT() pmcEnablePidLow(ID_PIT_MSK)

/**
 * @brief   Disables the PIT peripheral clock.
 *
 * @api
 */
#define pmcDisablePIT() pmcDisablePidLow(ID_PIT_MSK)

/**
 * @brief   Enables the XDMAC0 peripheral clock.
 *
 * @api
 */
#define pmcEnableXDMAC0() pmcEnablePidLow(ID_XDMAC0_MSK)

/**
 * @brief   Disables the XDMAC0 peripheral clock.
 *
 * @api
 */
#define pmcDisableXDMAC0() pmcDisablePidLow(ID_XDMAC0_MSK)

/**
 * @brief   Enables the XDMAC1 peripheral clock.
 *
 * @api
 */
#define pmcEnableXDMAC1() pmcEnablePidLow(ID_XDMAC1_MSK)

/**
 * @brief   Disables the XDMAC1 peripheral clock.
 *
 * @api
 */
#define pmcDisableXDMAC1() pmcDisablePidLow(ID_XDMAC1_MSK)

/**
 * @brief   Enables the H32MX peripheral clock.
 *
 * @api
 */
#define pmcEnableH32MX() pmcEnablePidLow(ID_MATRIX1_MSK)

/**
 * @brief   Disables the H32MX peripheral clock.
 *
 * @api
 */
#define pmcDisableH32MX() pmcDisablePidLow(ID_MATRIX1_MSK)

/**
 * @brief   Enables the H64MX peripheral clock.
 *
 * @api
 */
#define pmcEnableH64MX() pmcEnablePidLow(ID_MATRIX0_MSK)

/**
 * @brief   Disables the H64MX peripheral clock.
 *
 * @api
 */
#define pmcDisableH64MX() pmcDisablePidLow(ID_MATRIX0_MSK)

/**
 * @brief   Enables the PIO peripheral clock.
 *
 * @api
 */
#define pmcEnablePIO() pmcEnablePidLow(ID_PIOA_MSK)

/**
 * @brief   Disables the PIO peripheral clock.
 *
 * @api
 */
#define pmcDisablePIO() pmcDisablePidLow(ID_PIOA_MSK)

/**
 * @brief   Enables the SPI0 peripheral clock.
 *
 * @api
 */
#define pmcEnableSPI0() pmcEnablePidHigh(ID_SPI0_MSK)

/**
 * @brief   Disables the SPI0 peripheral clock.
 *
 * @api
 */
#define pmcDisableSPI0() pmcDisablePidHigh(ID_SPI0_MSK)

/**
 * @brief   Enables the SPI1 peripheral clock.
 *
 * @api
 */
#define pmcEnableSPI1() pmcEnablePidHigh(ID_SPI1_MSK)

/**
 * @brief   Disables the SPI11 peripheral clock.
 *
 * @api
 */
#define pmcDisableSPI1() pmcDisablePidHigh(ID_SPI1_MSK)

/**
 * @brief   Enables the UART0 peripheral clock.
 *
 * @api
 */
#define pmcEnableUART0() pmcEnablePidLow(ID_UART0_MSK)

/**
 * @brief   Disables the UART0 peripheral clock.
 *
 * @api
 */
#define pmcDisableUART0() pmcDisablePidLow(ID_UART0_MSK)

/**
 * @brief   Enables the UART1 peripheral clock.
 *
 * @api
 */
#define pmcEnableUART1() pmcEnablePidLow(ID_UART1_MSK)

/**
 * @brief   Disables the UART1 peripheral clock.
 *
 * @api
 */
#define pmcDisableUART1() pmcDisablePidLow(ID_UART1_MSK)

/**
 * @brief   Enables the UART2 peripheral clock.
 *
 * @api
 */
#define pmcEnableUART2() pmcEnablePidLow(ID_UART2_MSK)

/**
 * @brief   Disables the UART2 peripheral clock.
 *
 * @api
 */
#define pmcDisableUART2() pmcDisablePidLow(ID_UART2_MSK)

/**
 * @brief   Enables the UART3 peripheral clock.
 *
 * @api
 */
#define pmcEnableUART3() pmcEnablePidLow(ID_UART3_MSK)

/**
 * @brief   Disables the UART3 peripheral clock.
 *
 * @api
 */
#define pmcDisableUART3() pmcDisablePidLow(ID_UART3_MSK)

/**
 * @brief   Enables the UART4 peripheral clock.
 *
 * @api
 */
#define pmcEnableUART4() pmcEnablePidLow(ID_UART4_MSK)

/**
 * @brief   Disables the UART4 peripheral clock.
 *
 * @api
 */
#define pmcDisableUART4() pmcDisablePidLow(ID_UART4_MSK)

/**
 * @brief   Enables the FLEXCOM0 peripheral clock.
 *
 * @api
 */
#define pmcEnableFLEXCOM0() pmcEnablePidLow(ID_FLEXCOM0_MSK)

/**
 * @brief   Disables the FLEXCOM0 peripheral clock.
 *
 * @api
 */
#define pmcDisableFLEXCOM0() pmcDisablePidLow(ID_FLEXCOM0_MSK)

/**
 * @brief   Enables the FLEXCOM1 peripheral clock.
 *
 * @api
 */
#define pmcEnableFLEXCOM1() pmcEnablePidLow(ID_FLEXCOM1_MSK)

/**
 * @brief   Disables the FLEXCOM1 peripheral clock.
 *
 * @api
 */
#define pmcDisableFLEXCOM1() pmcDisablePidLow(ID_FLEXCOM1_MSK)

/**
 * @brief   Enables the FLEXCOM2 peripheral clock.
 *
 * @api
 */
#define pmcEnableFLEXCOM2() pmcEnablePidLow(ID_FLEXCOM2_MSK)

/**
 * @brief   Disables the FLEXCOM2 peripheral clock.
 *
 * @api
 */
#define pmcDisableFLEXCOM2() pmcDisablePidLow(ID_FLEXCOM2_MSK)

/**
 * @brief   Enables the FLEXCOM0 peripheral clock.
 *
 * @api
 */
#define pmcEnableFLEXCOM3() pmcEnablePidLow(ID_FLEXCOM3_MSK)

/**
 * @brief   Disables the FLEXCOM3 peripheral clock.
 *
 * @api
 */
#define pmcDisableFLEXCOM3() pmcDisablePidLow(ID_FLEXCOM3_MSK)

/**
 * @brief   Enables the FLEXCOM4 peripheral clock.
 *
 * @api
 */
#define pmcEnableFLEXCOM4() pmcEnablePidLow(ID_FLEXCOM4_MSK)

/**
 * @brief   Disables the FLEXCOM4 peripheral clock.
 *
 * @api
 */
#define pmcDisableFLEXCOM4() pmcDisablePidLow(ID_FLEXCOM4_MSK)

/**
 * @brief   Enables the TC0 peripheral clock.
 *
 * @api
 */
#define pmcEnableTC0() pmcEnablePidHigh(ID_TC0_MSK)

/**
 * @brief   Disables the TC0 peripheral clock.
 *
 * @api
 */
#define pmcDisableTC0() pmcDisablePidHigh(ID_TC0_MSK)

/**
 * @brief   Enables the TC1 peripheral clock.
 *
 * @api
 */
#define pmcEnableTC1() pmcEnablePidHigh(ID_TC1_MSK)

/**
 * @brief   Disables the TC1 peripheral clock.
 *
 * @api
 */
#define pmcDisableTC1() pmcDisablePidHigh(ID_TC1_MSK)


/**
 * @brief   Enables the AES peripheral clock.
 *
 * @api
 */
#define pmcEnableAES() 	pmcEnablePidLow(ID_AES_MSK)

/**
 * @brief   Disables the AES peripheral clock.
 *
 * @api
 */
#define pmcDisableAES() pmcDisablePidLow(ID_AES_MSK)

/**
 * @brief   Enables the TRNG peripheral clock.
 *
 * @api
 */
#define pmcEnableTRNG()	pmcEnablePidHigh(ID_TRNG_MSK)
/**
 * @brief   Disables the TRNG peripheral clock.
 *
 * @api
 */
#define pmcDisableTRNG() pmcDisablePidHigh(ID_TRNG_MSK)

/**
 * @brief   Enables the DES peripheral clock.
 *
 * @api
 */
#define pmcEnableDES()	pmcEnablePidLow(ID_TDES_MSK)
/**
 * @brief   Disables the DES peripheral clock.
 *
 * @api
 */
#define pmcDisableDES() pmcDisablePidLow(ID_TDES_MSK)

/**
 * @brief   Enables the SHA peripheral clock.
 *
 * @api
 */
#define pmcEnableSHA()	pmcEnablePidLow(ID_SHA_MSK)
/**
 * @brief   Disables the SHA peripheral clock.
 *
 * @api
 */
#define pmcDisableSHA() pmcDisablePidLow(ID_SHA_MSK)

/**
 * @brief   Enables the ETH0 peripheral clock.
 *
 * @api
 */
#define pmcEnableETH0() pmcEnablePidLow(ID_GMAC0_MSK)

/**
 * @brief   Disables the ETH0 peripheral clock.
 *
 * @api
 */
#define pmcDisableETH0() pmcDisablePidLow(ID_GMAC0_MSK)

/**
 * @brief   Enables the SECUMOD peripheral clock.
 *
 * @api
 */
#define pmcEnableSEC() pmcEnablePidLow(ID_SECUMOD_MSK)

/**
 * @brief   Disables the SECUMOD peripheral clock.
 *
 * @api
 */
#define pmcDisableSEC() pmcDisablePidLow(ID_SECUMOD_MSK)

/**
 * @brief   Enables the SDMMC0 peripheral clock.
 *
 * @api
 */
#define pmcEnableSDMMC0() 	pmcEnablePidLow(ID_SDMMC0_MSK)

/**
 * @brief   Disables the SDMMC0 peripheral clock.
 *
 * @api
 */
#define pmcDisableSDMMC0() pmcDisablePidLow(ID_SDMMC0_MSK)

/**
 * @brief   Enables the SDMMC1 peripheral clock.
 *
 * @api
 */
#define pmcEnableSDMMC1() 	pmcEnablePidHigh(ID_SDMMC1_MSK)

/**
 * @brief   Disables the SDMMC1 peripheral clock.
 *
 * @api
 */
#define pmcDisableSDMMC1() pmcDisablePidHigh(ID_SDMMC1_MSK)

/**
 * @brief   Enables the CLASSD peripheral clock.
 *
 * @api
 */
#define pmcEnableCLASSD0()   pmcEnablePidHigh(ID_CLASSD_MSK)

/**
 * @brief   Disables the CLASSD peripheral clock.
 *
 * @api
 */
#define pmcDisableCLASSD0() pmcDisablePidHigh(ID_CLASSD_MSK)

/**
 * @brief   Enables the CLASSD generic clock.
 *
 * @api
 */
#define pmcEnableGclkCLASSD0()   pmcEnableGclk(ID_CLASSD)

/**
 * @brief   Disables the CLASSD generic clock.
 *
 * @api
 */
#define pmcDisableGclkCLASSD0() pmcDisableGclk(ID_CLASSD)

/**
 * @brief   Enables the TRNG peripheral clock.
 *
 * @api
 */
#define pmcEnableTRNG0()   pmcEnablePidHigh(ID_TRNG_MSK)

/**
 * @brief   Disables the TRNG peripheral clock.
 *
 * @api
 */
#define pmcDisableTRNG0() pmcDisablePidHigh(ID_TRNG_MSK)

/**
 * @brief   Enables the QSPI0 peripheral clock.
 *
 * @api
 */
#define pmcEnableQSPI0() pmcEnablePidHigh(ID_QSPI0_MSK)

/**
 * @brief   Disables the QSPI0 peripheral clock.
 *
 * @api
 */
#define pmcDisableQSPI0() pmcDisablePidHigh(ID_QSPI0_MSK)

/**
 * @brief   Enables the QSPI1 peripheral clock.
 *
 * @api
 */
#define pmcEnableQSPI1() pmcEnablePidHigh(ID_QSPI1_MSK)

/**
 * @brief   Disables the QSPI1 peripheral clock.
 *
 * @api
 */
#define pmcDisableQSPI1() pmcDisablePidHigh(ID_QSPI1_MSK)

/**
 * @brief   Enables the LCDC peripheral clock.
 *
 * @api
 */
#define pmcEnableLCDC() pmcEnablePidHigh(ID_LCDC_MSK)

/**
 * @brief   Disables the LCDC peripheral clock.
 *
 * @api
 */
#define pmcDisableLCDC() pmcDisablePidHigh(ID_LCDC_MSK)

/**
 * @brief   Enables the TWIHS0 peripheral clock.
 *
 * @api
 */
#define pmcEnableTWIHS0() pmcEnablePidLow(ID_TWIHS0_MSK)

/**
 * @brief   Disables the TWIHS0 peripheral clock.
 *
 * @api
 */
#define pmcDisableTWIHS0() pmcDisablePidLow(ID_TWIHS0_MSK)

/**
 * @brief   Enables the TWIHS1 peripheral clock.
 *
 * @api
 */
#define pmcEnableTWIHS1() pmcEnablePidLow(ID_TWIHS1_MSK)

/**
 * @brief   Disables the TWIHS1 peripheral clock.
 *
 * @api
 */
#define pmcDisableTWIHS1() pmcDisablePidLow(ID_TWIHS1_MSK)

/** @} */

/*===========================================================================*/
/* External declarations.                                                    */
/*===========================================================================*/

#ifdef __cplusplus
extern "C" {
#endif
#ifdef __cplusplus
}
#endif

#endif /* _SAMA_PMC_ */

/** @} */