/*
    ChibiOS/HAL - Copyright (C) 2006-2014 Giovanni Di Sirio

    Licensed under the Apache License, Version 2.0 (the "License");
    you may not use this file except in compliance with the License.
    You may obtain a copy of the License at

        http://www.apache.org/licenses/LICENSE-2.0

    Unless required by applicable law or agreed to in writing, software
    distributed under the License is distributed on an "AS IS" BASIS,
    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    See the License for the specific language governing permissions and
    limitations under the License.
*/

/**
 * @file    KINETIS/spi_lld.h
 * @brief   KINETIS SPI subsystem low level driver header.
 *
 * @addtogroup SPI
 * @{
 */

#ifndef _SPI_LLD_H_
#define _SPI_LLD_H_

#if HAL_USE_SPI || defined(__DOXYGEN__)

/*===========================================================================*/
/* Driver constants.                                                         */
/*===========================================================================*/

/*===========================================================================*/
/* Driver pre-compile time settings.                                         */
/*===========================================================================*/

/**
 * @name    Configuration options
 * @{
 */
/**
 * @brief   SPI0 driver enable switch.
 * @details If set to @p TRUE the support for SPI0 is included.
 * @note    The default is @p FALSE.
 */
#if !defined(KINETIS_SPI_USE_SPI0) || defined(__DOXYGEN__)
#define KINETIS_SPI_USE_SPI0                  FALSE
#endif

/**
 * @brief   SPI0 interrupt priority level setting.
 */
#if !defined(KINETIS_SPI_SPI0_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define KINETIS_SPI_SPI0_IRQ_PRIORITY         10
#endif

/*===========================================================================*/
/* Derived constants and error checks.                                       */
/*===========================================================================*/

#define KINETIS_HAS_SPI0    TRUE

#if KINETIS_SPI_USE_SPI0 && !KINETIS_HAS_SPI0
#error "SPI0 not present in the selected device"
#endif

#if !KINETIS_SPI_USE_SPI0
#error "SPI driver activated but no SPI peripheral assigned"
#endif

#if KINETIS_SPI_USE_SPI0 &&                                                   \
    !CORTEX_IS_VALID_KERNEL_PRIORITY(KINETIS_SPI_SPI0_IRQ_PRIORITY)
#error "Invalid IRQ priority assigned to SPI0"
#endif

/*===========================================================================*/
/* Driver data structures and types.                                         */
/*===========================================================================*/

/**
 * @brief   Type of a structure representing an SPI driver.
 */
typedef struct SPIDriver SPIDriver;

/**
 * @brief   SPI notification callback type.
 *
 * @param[in] spip      pointer to the @p SPIDriver object triggering the
 *                      callback
 */
typedef void (*spicallback_t)(SPIDriver *spip);

/**
 * @brief   Driver configuration structure.
 */
typedef struct {
  /**
   * @brief Operation complete callback or @p NULL.
   */
  spicallback_t             end_cb;
  /* End of the mandatory fields.*/
  /**
   * @brief The PCS chip select lines.
   */
  uint8_t                   pcs;
  /**
   * @brief The chip select line port - when not using pcs.
   */
  ioportid_t                ssport;
  /**
   * @brief The chip select line pad number - when not using pcs.
   */
  uint16_t                  sspad;
  /**
   * @brief SPI initialization data.
   */
  uint32_t                  tar0;
} SPIConfig;

/**
 * @brief   Structure representing a SPI driver.
 */
struct SPIDriver {
  /**
   * @brief Driver state.
   */
  spistate_t                state;
  /**
   * @brief Current configuration data.
   */
  const SPIConfig           *config;
#if SPI_USE_WAIT || defined(__DOXYGEN__)
  /**
   * @brief Waiting thread.
   */
  thread_reference_t        thread;
#endif /* SPI_USE_WAIT */
#if SPI_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
  /**
   * @brief Mutex protecting the bus.
   */
  mutex_t                   mutex;
#endif /* SPI_USE_MUTUAL_EXCLUSION */
#if defined(SPI_DRIVER_EXT_FIELDS)
  SPI_DRIVER_EXT_FIELDS
#endif
  /* End of the mandatory fields.*/
  /**
   * @brief Pointer to the SPIx registers block.
   */
  SPI_TypeDef               *spi;
  /**
   * @brief   Number of bytes of data to transfer.
   */
  size_t                    nbytes;
  /**
   * @brief   Pointer to the buffer with data to send.
   */
  const uint8_t             *txbuf;
  /**
   * @brief   Current index in buffer when sending data.
   */
  size_t                    txidx;
  /**
   * @brief   Pointer to the buffer to put received data.
   */
  uint8_t                   *rxbuf;
  /**
   * @brief   Current index in buffer when receiving data.
   */
  size_t                    rxidx;
};

/*===========================================================================*/
/* Driver macros.                                                            */
/*===========================================================================*/

/* TAR settings for n bits at SYSCLK / 2 */
#define KINETIS_SPI_TAR_SYSCLK_DIV_2(n)\
    SPIx_CTARn_FMSZ((n) - 1) | \
    SPIx_CTARn_CPOL | \
    SPIx_CTARn_CPHA | \
    SPIx_CTARn_DBR | \
    SPIx_CTARn_PBR(0) | \
    SPIx_CTARn_BR(0) | \
    SPIx_CTARn_CSSCK(0) | \
    SPIx_CTARn_ASC(0) | \
    SPIx_CTARn_DT(0)

/* TAR settings for n bits at SYSCLK / 4096 for debugging */
#define KINETIS_SPI_TAR_SYSCLK_DIV_4096(n) \
    SPIx_CTARn_FMSZ(((n) - 1)) | \
    SPIx_CTARn_CPOL | \
    SPIx_CTARn_CPHA | \
    SPIx_CTARn_PBR(0) | \
    SPIx_CTARn_BR(0xB) | \
    SPIx_CTARn_CSSCK(0xB) | \
    SPIx_CTARn_ASC(0x7) | \
    SPIx_CTARn_DT(0xB)

#define KINETIS_SPI_TAR_8BIT_FAST   KINETIS_SPI_TAR_SYSCLK_DIV_2(8)
#define KINETIS_SPI_TAR_8BIT_SLOW   KINETIS_SPI_TAR_SYSCLK_DIV_4096(8)

#define KINETIS_SPI_TAR0_DEFAULT    KINETIS_SPI_TAR_SYSCLK_DIV_2(8)
#define KINETIS_SPI_TAR1_DEFAULT    KINETIS_SPI_TAR_SYSCLK_DIV_2(8)

/*
 * A mask of the slave select lines to be managed by KINETIS DSPI.
 *
 * These values are mapped to real ports and pins by selecting
 * PAL_MODE_ALTERNATIVE_2 as the pin mode. Multiple values may
 * be ORed together to select multiple outputs. This can be used with an
 * external multiplexor to increase the number of slave selects.
 *
 * If KINETIS_SPI_PCS_NONE is selected for the configuration pcs field
 * then the configuration ssport and sspad values are used to control the
 * slave select directly and the KINETIS DSPI managed select is not used.
 */
#define KINETIS_SPI_PCS_NONE        0x00
#define KINETIS_SPI_PCS0            0x01
#define KINETIS_SPI_PCS1            0x02
#define KINETIS_SPI_PCS2            0x04
#define KINETIS_SPI_PCS3            0x08
#define KINETIS_SPI_PCS4            0x10
#define KINETIS_SPI_PCS_ALL         0x1F

/*===========================================================================*/
/* External declarations.                                                    */
/*===========================================================================*/

#if KINETIS_SPI_USE_SPI0 && !defined(__DOXYGEN__)
extern SPIDriver SPID1;
#endif

#ifdef __cplusplus
extern "C" {
#endif
  void spi_lld_init(void);
  void spi_lld_start(SPIDriver *spip);
  void spi_lld_stop(SPIDriver *spip);
  void spi_lld_select(SPIDriver *spip);
  void spi_lld_unselect(SPIDriver *spip);
  void spi_lld_ignore(SPIDriver *spip, size_t n);
  void spi_lld_exchange(SPIDriver *spip, size_t n,
                        const void *txbuf, void *rxbuf);
  void spi_lld_send(SPIDriver *spip, size_t n, const void *txbuf);
  void spi_lld_receive(SPIDriver *spip, size_t n, void *rxbuf);
  uint16_t spi_lld_polled_exchange(SPIDriver *spip, uint16_t frame);
#ifdef __cplusplus
}
#endif

#endif /* HAL_USE_SPI */

#endif /* _SPI_LLD_H_ */

/** @} */