/* ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. */ /** * @file GPIOv1/hal_pal_lld.h * @brief AVR/MEGA PAL subsystem low level driver header. * * @addtogroup PAL * @{ */ #ifndef HAL_PAL_LLD_H #define HAL_PAL_LLD_H #include "avr_pins.h" #if HAL_USE_PAL || defined(__DOXYGEN__) /*==========================================================================*/ /* Unsupported modes and specific modes. */ /*==========================================================================*/ #undef PAL_MODE_INPUT_PULLDOWN #undef PAL_MODE_OUTPUT_OPENDRAIN /*==========================================================================*/ /* I/O Ports Types and constants. */ /*==========================================================================*/ /** * @brief Width, in bits, of an I/O port. */ #define PAL_IOPORTS_WIDTH 8 /** * @brief Whole port mask. * @details This macro specifies all the valid bits into a port. */ #define PAL_WHOLE_PORT ((ioportmask_t)0xFF) /** * @name Line handling macros * @{ */ /** * @brief Forms a line identifier. * @details A port/pad pair are encoded into an @p ioline_t type. The encoding * of this type is platform-dependent. * @note In this driver the pad number and the port identifier are * encoded in a structure of type ioline_t. */ #define PAL_LINE(port, pad) _pal_lld_setlineid(port, pad) /** * @brief Decodes a port identifier from a line identifier. */ #define PAL_PORT(line) _pal_lld_getportfromline(line) /** * @brief Decodes a pad identifier from a line identifier. */ #define PAL_PAD(line) _pal_lld_getpadfromline(line) /** * @brief Value identifying an invalid line. */ #define PAL_NOLINE 0U /** @} */ /** * @brief AVR setup registers. */ typedef struct { uint8_t out; uint8_t dir; } avr_gpio_setup_t; /** * @brief AVR registers block. * @note On some devices registers do not follow this layout on some * ports, the ports with abnormal layout cannot be used through * PAL driver. Example: PORT F on Mega128. */ typedef struct { volatile uint8_t in; volatile uint8_t dir; volatile uint8_t out; } avr_gpio_registers_t; /** * @brief Generic I/O ports static initializer. * @details An instance of this structure must be passed to @p palInit() at * system startup time in order to initialized the digital I/O * subsystem. This represents only the initial setup, specific pads * or whole ports can be reprogrammed at later time. */ typedef struct { #if defined(PORTA) || defined(__DOXYGEN__) avr_gpio_setup_t porta; #endif #if defined(PORTB) || defined(__DOXYGEN__) avr_gpio_setup_t portb; #endif #if defined(PORTC) || defined(__DOXYGEN__) avr_gpio_setup_t portc; #endif #if defined(PORTD) || defined(__DOXYGEN__) avr_gpio_setup_t portd; #endif #if defined(PORTE) || defined(__DOXYGEN__) avr_gpio_setup_t porte; #endif #if defined(PORTF) || defined(__DOXYGEN__) avr_gpio_setup_t portf; #endif #if defined(PORTG) || defined(__DOXYGEN__) avr_gpio_setup_t portg; #endif #if defined(PORTH) || defined(__DOXYGEN__) avr_gpio_setup_t porth; #endif #if defined(PORTJ) || defined(__DOXYGEN__) avr_gpio_setup_t portj; #endif #if defined(PORTK) || defined(__DOXYGEN__) avr_gpio_setup_t portk; #endif #if defined(PORTL) || defined(__DOXYGEN__) avr_gpio_setup_t portl; #endif } PALConfig; /** * @brief Digital I/O port sized unsigned type. */ typedef uint8_t ioportmask_t; /** * @brief Digital I/O modes. */ typedef uint8_t iomode_t; /** * @brief Port Identifier. * @details This type can be a scalar or some kind of pointer, do not make * any assumption about it, use the provided macros when populating * variables of this type. */ typedef volatile avr_gpio_registers_t * ioportid_t; /** * @brief Type of an pad identifier. */ typedef uint8_t iopadid_t; /** * @brief Type of an I/O line. */ typedef struct { ioportid_t port; /* Line port identifier. */ iopadid_t pad; /* Line pad identifier. */ }ioline_t; /** * @brief Type of an event mode. */ typedef uint8_t ioeventmode_t; /*==========================================================================*/ /* I/O Ports Identifiers. */ /*==========================================================================*/ #if defined(PORTA) || defined(__DOXYGEN__) /** * @brief GPIO port A identifier. */ #define IOPORT1 ((volatile avr_gpio_registers_t *)&PINA) #endif #if defined(PORTB) || defined(__DOXYGEN__) /** * @brief GPIO port B identifier. */ #define IOPORT2 ((volatile avr_gpio_registers_t *)&PINB) #endif #if defined(PORTC) || defined(__DOXYGEN__) /** * @brief GPIO port C identifier. */ #define IOPORT3 ((volatile avr_gpio_registers_t *)&PINC) #endif #if defined(PORTD) || defined(__DOXYGEN__) /** * @brief GPIO port D identifier. */ #define IOPORT4 ((volatile avr_gpio_registers_t *)&PIND) #endif #if defined(PORTE) || defined(__DOXYGEN__) /** * @brief GPIO port E identifier. */ #define IOPORT5 ((volatile avr_gpio_registers_t *)&PINE) #endif #if defined(PORTF) || defined(__DOXYGEN__) /** * @brief GPIO port F identifier. */ #define IOPORT6 ((volatile avr_gpio_registers_t *)&PINF) #endif #if defined(PORTG) || defined(__DOXYGEN__) /** * @brief GPIO port G identifier. */ #define IOPORT7 ((volatile avr_gpio_registers_t *)&PING) #endif #if defined(PORTH) || defined(__DOXYGEN__) /** * @brief GPIO port H identifier. */ #define IOPORT8 ((volatile avr_gpio_registers_t *)&PINH) #endif #if defined(PORTJ) || defined(__DOXYGEN__) /** * @brief GPIO port J identifier. */ #define IOPORT9 ((volatile avr_gpio_registers_t *)&PINJ) #endif #if defined(PORTK) || defined(__DOXYGEN__) /** * @brief GPIO port K identifier. */ #define IOPORT10 ((volatile avr_gpio_registers_t *)&PINK) #endif #if defined(PORTL) || defined(__DOXYGEN__) /** * @brief GPIO port L identifier. */ #define IOPORT11 ((volatile avr_gpio_registers_t *)&PINL) #endif #if defined(PORTADC) || defined(__DOXYGEN__) /** * @brief GPIO port ADC identifier. */ #define IOPORTADC ((volatile avr_gpio_registers_t *)&PINADC) #endif #if defined(PORT_SPI1) || defined(__DOXYGEN__) /** * @brief GPIO port SPI1 identifier. */ #define IOPORTSPI1 ((volatile avr_gpio_registers_t *)&PIN_SPI1) #endif /*==========================================================================*/ /* Implementation, some of the following macros could be implemented as */ /* functions, if so please put them in hal_pal_lld.c. */ /*==========================================================================*/ /** * @brief Low level PAL subsystem initialization. * * @param[in] config the architecture-dependent ports configuration * * @notapi */ #define pal_lld_init(config) _pal_lld_init(config) /** * @brief Reads the physical I/O port states. * * @param[in] port port identifier * @return The port bits. * * @notapi */ #define pal_lld_readport(port) ((port)->in) /** * @brief Reads the output latch. * @details The purpose of this function is to read back the latched output * value. * * @param[in] port port identifier * @return The latched logical states. * * @notapi */ #define pal_lld_readlatch(port) ((port)->out) /** * @brief Writes a bits mask on a I/O port. * * @param[in] port port identifier * @param[in] bits bits to be written on the specified port * * @notapi */ #define pal_lld_writeport(port, bits) ((port)->out = bits) /** * @brief Pads group mode setup. * @details This function programs a pads group belonging to the same port * with the specified mode. * @note Programming an unknown or unsupported mode is silently ignored. * * @param[in] port port identifier * @param[in] mask group mask * @param[in] offset group bit offset within the port * @param[in] mode group mode * * @notapi */ #define pal_lld_setgroupmode(port, mask, offset, mode) \ _pal_lld_setgroupmode(port, mask << offset, mode) /** * @brief Sets a pad logical state to @p PAL_HIGH. * * @param[in] port port identifier * @param[in] pad pad number within the port * * @notapi */ #define pal_lld_setpad(port, pad) \ port->out |= _BV(pad) /** * @brief Clears a pad logical state to @p PAL_LOW. * * @param[in] port port identifier * @param[in] pad pad number within the port * * @notapi */ #define pal_lld_clearpad(port, pad) \ port->out &= ~_BV(pad) /** * @brief Pad event enable. * @details This function programs an event callback in the specified mode. * @note Programming an unknown or unsupported mode is silently ignored. * * @param[in] port port identifier * @param[in] pad pad number within the port * @param[in] mode pad event mode * @param[in] callback event callback function * @param[in] arg callback argument * * @notapi */ #define pal_lld_enablepadevent(port, pad, mode, callback, arg) \ _pal_lld_enablepadevent(port, pad, mode, callback, arg) /** * @brief Pad event disable. * @details This function disables previously programmed event callbacks. * * @param[in] port port identifier * @param[in] pad pad number within the port * * @notapi */ #define pal_lld_disablepadevent(port, pad) \ _pal_lld_disablepadevent(port, pad) /** * @brief Returns a PAL event structure associated to a pad. * * @param[in] port port identifier * @param[in] pad pad number within the port * * @notapi */ #define pal_lld_get_pad_event(port, pad) \ &_pal_events[pad]; (void)(port) /** * @brief Returns a PAL event structure associated to a line. * * @param[in] line line identifier * * @notapi */ #define pal_lld_get_line_event(line) \ &_pal_events[PAL_PAD(line)] #if !defined(__DOXYGEN__) extern const PALConfig pal_default_config; extern palevent_t _pal_events[16]; #endif extern ROMCONST PALConfig pal_default_config; #ifdef __cplusplus extern "C" { #endif void _pal_lld_init(const PALConfig *config); void _pal_lld_setgroupmode(ioportid_t port, ioportmask_t mask, iomode_t mode); void _pal_lld_enablepadevent(ioportid_t port, iopadid_t pad, ioeventmode_t mode, palcallback_t callback, void *arg); void _pal_lld_disablepadevent(ioportid_t port, iopadid_t pad); ioline_t _pal_lld_setlineid(ioportid_t port, uint8_t pad); ioportid_t _pal_lld_getportfromline(ioline_t line); uint8_t _pal_lld_getpadfromline(ioline_t line); #ifdef __cplusplus } #endif #endif /* HAL_USE_PAL */ #endif /* HAL_PAL_LLD_H */ /** @} */