/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
2011 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see .
*/
/**
* @file STM32/sdc_lld.c
* @brief STM32 SDC subsystem low level driver source.
*
* @addtogroup SDC
* @{
*/
#include
#include "ch.h"
#include "hal.h"
#if HAL_USE_SDC || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/** @brief SDCD1 driver identifier.*/
SDCDriver SDCD1;
/*===========================================================================*/
/* Driver local variables. */
/*===========================================================================*/
#if STM32_SDC_UNALIGNED_SUPPORT
/**
* @brief Buffer for temporary storage during unaligned transfers.
*/
static union {
uint32_t alignment;
uint8_t buf[SDC_BLOCK_SIZE];
} u;
#endif
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
/**
* @brief Reads one or more blocks.
*
* @param[in] sdcp pointer to the @p SDCDriver object
* @param[in] startblk first block to read
* @param[out] buf pointer to the read buffer, it must be aligned to
* four bytes boundary
* @param[in] n number of blocks to read
* @return The operation status.
* @retval FALSE operation succeeded, the requested blocks have been
* read.
* @retval TRUE operation failed, the state of the buffer is uncertain.
*
* @notapi
*/
static bool_t sdc_lld_read_multiple(SDCDriver *sdcp, uint32_t startblk,
uint8_t *buf, uint32_t n) {
uint32_t resp[1];
/* Checks for errors and waits for the card to be ready for reading.*/
if (_sdc_wait_for_transfer_state(sdcp))
return TRUE;
/* Prepares the DMA channel for reading.*/
dmaStreamSetMemory0(STM32_DMA2_STREAM4, buf);
dmaStreamSetTransactionSize(STM32_DMA2_STREAM4,
(n * SDC_BLOCK_SIZE) / sizeof (uint32_t));
dmaStreamSetMode(STM32_DMA2_STREAM4,
STM32_DMA_CR_PL(STM32_SDC_SDIO_DMA_PRIORITY) |
STM32_DMA_CR_DIR_P2M | STM32_DMA_CR_PSIZE_WORD |
STM32_DMA_CR_MSIZE_WORD | STM32_DMA_CR_MINC);
/* Setting up data transfer.
Options: Card to Controller, Block mode, DMA mode, 512 bytes blocks.*/
SDIO->ICR = 0xFFFFFFFF;
SDIO->MASK = SDIO_MASK_DCRCFAILIE | SDIO_MASK_DTIMEOUTIE |
SDIO_MASK_DATAENDIE | SDIO_MASK_STBITERRIE;
SDIO->DLEN = n * SDC_BLOCK_SIZE;
SDIO->DCTRL = SDIO_DCTRL_DTDIR |
SDIO_DCTRL_DBLOCKSIZE_3 | SDIO_DCTRL_DBLOCKSIZE_0 |
SDIO_DCTRL_DMAEN |
SDIO_DCTRL_DTEN;
/* DMA channel activation.*/
dmaStreamEnable(STM32_DMA2_STREAM4);
/* Read multiple blocks command.*/
if ((sdcp->cardmode & SDC_MODE_HIGH_CAPACITY) == 0)
startblk *= SDC_BLOCK_SIZE;
if (sdc_lld_send_cmd_short_crc(sdcp, SDC_CMD_READ_MULTIPLE_BLOCK,
startblk, resp) ||
SDC_R1_ERROR(resp[0]))
goto error;
chSysLock();
if (SDIO->MASK != 0) {
chDbgAssert(sdcp->thread == NULL,
"sdc_lld_read_multiple(), #1", "not NULL");
sdcp->thread = chThdSelf();
chSchGoSleepS(THD_STATE_SUSPENDED);
chDbgAssert(sdcp->thread == NULL,
"sdc_lld_read_multiple(), #2", "not NULL");
}
if ((SDIO->STA & SDIO_STA_DATAEND) == 0) {
chSysUnlock();
goto error;
}
dmaStreamDisable(STM32_DMA2_STREAM4);
SDIO->ICR = 0xFFFFFFFF;
SDIO->DCTRL = 0;
chSysUnlock();
return sdc_lld_send_cmd_short_crc(sdcp, SDC_CMD_STOP_TRANSMISSION, 0, resp);
error:
dmaStreamDisable(STM32_DMA2_STREAM4);
SDIO->ICR = 0xFFFFFFFF;
SDIO->MASK = 0;
SDIO->DCTRL = 0;
return TRUE;
}
/**
* @brief Reads one block.
*
* @param[in] sdcp pointer to the @p SDCDriver object
* @param[in] startblk first block to read
* @param[out] buf pointer to the read buffer, it must be aligned to
* four bytes boundary
* @return The operation status.
* @retval FALSE operation succeeded, the requested blocks have been
* read.
* @retval TRUE operation failed, the state of the buffer is uncertain.
*
* @notapi
*/
static bool_t sdc_lld_read_single(SDCDriver *sdcp, uint32_t startblk,
uint8_t *buf) {
uint32_t resp[1];
/* Checks for errors and waits for the card to be ready for reading.*/
if (_sdc_wait_for_transfer_state(sdcp))
return TRUE;
/* Prepares the DMA channel for reading.*/
dmaStreamSetMemory0(STM32_DMA2_STREAM4, buf);
dmaStreamSetTransactionSize(STM32_DMA2_STREAM4,
SDC_BLOCK_SIZE / sizeof (uint32_t));
dmaStreamSetMode(STM32_DMA2_STREAM4,
STM32_DMA_CR_PL(STM32_SDC_SDIO_DMA_PRIORITY) |
STM32_DMA_CR_DIR_P2M | STM32_DMA_CR_PSIZE_WORD |
STM32_DMA_CR_MSIZE_WORD | STM32_DMA_CR_MINC);
/* Setting up data transfer.
Options: Card to Controller, Block mode, DMA mode, 512 bytes blocks.*/
SDIO->ICR = 0xFFFFFFFF;
SDIO->MASK = SDIO_MASK_DCRCFAILIE | SDIO_MASK_DTIMEOUTIE |
SDIO_MASK_DATAENDIE | SDIO_MASK_STBITERRIE;
SDIO->DLEN = SDC_BLOCK_SIZE;
SDIO->DCTRL = SDIO_DCTRL_DTDIR |
SDIO_DCTRL_DBLOCKSIZE_3 | SDIO_DCTRL_DBLOCKSIZE_0 |
SDIO_DCTRL_DMAEN |
SDIO_DCTRL_DTEN;
/* DMA channel activation.*/
dmaStreamEnable(STM32_DMA2_STREAM4);
/* Read single block command.*/
if ((sdcp->cardmode & SDC_MODE_HIGH_CAPACITY) == 0)
startblk *= SDC_BLOCK_SIZE;
if (sdc_lld_send_cmd_short_crc(sdcp, SDC_CMD_READ_SINGLE_BLOCK,
startblk, resp) ||
SDC_R1_ERROR(resp[0]))
goto error;
chSysLock();
if (SDIO->MASK != 0) {
chDbgAssert(sdcp->thread == NULL,
"sdc_lld_read_single(), #1", "not NULL");
sdcp->thread = chThdSelf();
chSchGoSleepS(THD_STATE_SUSPENDED);
chDbgAssert(sdcp->thread == NULL,
"sdc_lld_read_single(), #2", "not NULL");
}
if ((SDIO->STA & SDIO_STA_DATAEND) == 0) {
chSysUnlock();
goto error;
}
dmaStreamDisable(STM32_DMA2_STREAM4);
SDIO->ICR = 0xFFFFFFFF;
SDIO->DCTRL = 0;
chSysUnlock();
return FALSE;
error:
dmaStreamDisable(STM32_DMA2_STREAM4);
SDIO->ICR = 0xFFFFFFFF;
SDIO->MASK = 0;
SDIO->DCTRL = 0;
return TRUE;
}
/**
* @brief Writes one or more blocks.
*
* @param[in] sdcp pointer to the @p SDCDriver object
* @param[in] startblk first block to write
* @param[out] buf pointer to the write buffer, it must be aligned to
* four bytes boundary
* @param[in] n number of blocks to write
* @return The operation status.
* @retval FALSE operation succeeded, the requested blocks have been
* written.
* @retval TRUE operation failed.
*
* @notapi
*/
static bool_t sdc_lld_write_multiple(SDCDriver *sdcp, uint32_t startblk,
const uint8_t *buf, uint32_t n) {
uint32_t resp[1];
/* Checks for errors and waits for the card to be ready for writing.*/
if (_sdc_wait_for_transfer_state(sdcp))
return TRUE;
/* Prepares the DMA channel for writing.*/
dmaStreamSetMemory0(STM32_DMA2_STREAM4, buf);
dmaStreamSetTransactionSize(STM32_DMA2_STREAM4,
(n * SDC_BLOCK_SIZE) / sizeof (uint32_t));
dmaStreamSetMode(STM32_DMA2_STREAM4,
STM32_DMA_CR_PL(STM32_SDC_SDIO_DMA_PRIORITY) |
STM32_DMA_CR_DIR_M2P | STM32_DMA_CR_PSIZE_WORD |
STM32_DMA_CR_MSIZE_WORD | STM32_DMA_CR_MINC);
/* Write multiple blocks command.*/
if ((sdcp->cardmode & SDC_MODE_HIGH_CAPACITY) == 0)
startblk *= SDC_BLOCK_SIZE;
if (sdc_lld_send_cmd_short_crc(sdcp, SDC_CMD_WRITE_MULTIPLE_BLOCK,
startblk, resp) ||
SDC_R1_ERROR(resp[0]))
return TRUE;
/* Setting up data transfer.
Options: Controller to Card, Block mode, DMA mode, 512 bytes blocks.*/
SDIO->ICR = 0xFFFFFFFF;
SDIO->MASK = SDIO_MASK_DCRCFAILIE | SDIO_MASK_DTIMEOUTIE |
SDIO_MASK_DATAENDIE | SDIO_MASK_TXUNDERRIE |
SDIO_MASK_STBITERRIE;
SDIO->DLEN = n * SDC_BLOCK_SIZE;
SDIO->DCTRL = SDIO_DCTRL_DBLOCKSIZE_3 | SDIO_DCTRL_DBLOCKSIZE_0 |
SDIO_DCTRL_DMAEN |
SDIO_DCTRL_DTEN;
/* DMA channel activation.*/
dmaStreamEnable(STM32_DMA2_STREAM4);
/* Note the mask is checked before going to sleep because the interrupt
may have occurred before reaching the critical zone.*/
chSysLock();
if (SDIO->MASK != 0) {
chDbgAssert(sdcp->thread == NULL,
"sdc_lld_write_multiple(), #1", "not NULL");
sdcp->thread = chThdSelf();
chSchGoSleepS(THD_STATE_SUSPENDED);
chDbgAssert(sdcp->thread == NULL,
"sdc_lld_write_multiple(), #2", "not NULL");
}
if ((SDIO->STA & SDIO_STA_DATAEND) == 0) {
chSysUnlock();
goto error;
}
dmaStreamDisable(STM32_DMA2_STREAM4);
SDIO->ICR = 0xFFFFFFFF;
SDIO->DCTRL = 0;
chSysUnlock();
return sdc_lld_send_cmd_short_crc(sdcp, SDC_CMD_STOP_TRANSMISSION, 0, resp);
error:
dmaStreamDisable(STM32_DMA2_STREAM4);
SDIO->ICR = 0xFFFFFFFF;
SDIO->MASK = 0;
SDIO->DCTRL = 0;
return TRUE;
}
/**
* @brief Writes one block.
*
* @param[in] sdcp pointer to the @p SDCDriver object
* @param[in] startblk first block to write
* @param[out] buf pointer to the write buffer, it must be aligned to
* four bytes boundary
* @param[in] n number of blocks to write
* @return The operation status.
* @retval FALSE operation succeeded, the requested blocks have been
* written.
* @retval TRUE operation failed.
*
* @notapi
*/
static bool_t sdc_lld_write_single(SDCDriver *sdcp, uint32_t startblk,
const uint8_t *buf) {
uint32_t resp[1];
/* Checks for errors and waits for the card to be ready for writing.*/
if (_sdc_wait_for_transfer_state(sdcp))
return TRUE;
/* Prepares the DMA channel for writing.*/
dmaStreamSetMemory0(STM32_DMA2_STREAM4, buf);
dmaStreamSetTransactionSize(STM32_DMA2_STREAM4,
SDC_BLOCK_SIZE / sizeof (uint32_t));
dmaStreamSetMode(STM32_DMA2_STREAM4,
STM32_DMA_CR_PL(STM32_SDC_SDIO_DMA_PRIORITY) |
STM32_DMA_CR_DIR_M2P | STM32_DMA_CR_PSIZE_WORD |
STM32_DMA_CR_MSIZE_WORD | STM32_DMA_CR_MINC);
/* Write single block command.*/
if ((sdcp->cardmode & SDC_MODE_HIGH_CAPACITY) == 0)
startblk *= SDC_BLOCK_SIZE;
if (sdc_lld_send_cmd_short_crc(sdcp, SDC_CMD_WRITE_BLOCK,
startblk, resp) ||
SDC_R1_ERROR(resp[0]))
return TRUE;
/* Setting up data transfer.
Options: Controller to Card, Block mode, DMA mode, 512 bytes blocks.*/
SDIO->ICR = 0xFFFFFFFF;
SDIO->MASK = SDIO_MASK_DCRCFAILIE | SDIO_MASK_DTIMEOUTIE |
SDIO_MASK_DATAENDIE | SDIO_MASK_TXUNDERRIE |
SDIO_MASK_STBITERRIE;
SDIO->DLEN = SDC_BLOCK_SIZE;
SDIO->DCTRL = SDIO_DCTRL_DBLOCKSIZE_3 | SDIO_DCTRL_DBLOCKSIZE_0 |
SDIO_DCTRL_DMAEN |
SDIO_DCTRL_DTEN;
/* DMA channel activation.*/
dmaStreamEnable(STM32_DMA2_STREAM4);
/* Note the mask is checked before going to sleep because the interrupt
may have occurred before reaching the critical zone.*/
chSysLock();
if (SDIO->MASK != 0) {
chDbgAssert(sdcp->thread == NULL,
"sdc_lld_write_single(), #1", "not NULL");
sdcp->thread = chThdSelf();
chSchGoSleepS(THD_STATE_SUSPENDED);
chDbgAssert(sdcp->thread == NULL,
"sdc_lld_write_single(), #2", "not NULL");
}
if ((SDIO->STA & SDIO_STA_DATAEND) == 0) {
chSysUnlock();
goto error;
}
dmaStreamDisable(STM32_DMA2_STREAM4);
SDIO->ICR = 0xFFFFFFFF;
SDIO->DCTRL = 0;
chSysUnlock();
return FALSE;
error:
dmaStreamDisable(STM32_DMA2_STREAM4);
SDIO->ICR = 0xFFFFFFFF;
SDIO->MASK = 0;
SDIO->DCTRL = 0;
return TRUE;
}
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
/**
* @brief SDIO IRQ handler.
*
* @isr
*/
CH_IRQ_HANDLER(SDIO_IRQHandler) {
CH_IRQ_PROLOGUE();
chSysLockFromIsr();
if (SDCD1.thread != NULL) {
chSchReadyI(SDCD1.thread);
SDCD1.thread = NULL;
}
chSysUnlockFromIsr();
/* Disables the source but the status flags are not reset because the
read/write functions need to check them.*/
SDIO->MASK = 0;
CH_IRQ_EPILOGUE();
}
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Low level SDC driver initialization.
*
* @notapi
*/
void sdc_lld_init(void) {
sdcObjectInit(&SDCD1);
SDCD1.thread = NULL;
}
/**
* @brief Configures and activates the SDC peripheral.
*
* @param[in] sdcp pointer to the @p SDCDriver object, must be @p NULL,
* this driver does not require any configuration
*
* @notapi
*/
void sdc_lld_start(SDCDriver *sdcp) {
if (sdcp->state == SDC_STOP) {
/* Note, the DMA must be enabled before the IRQs.*/
dmaStreamAllocate(STM32_DMA2_STREAM4, 0, NULL, NULL);
dmaStreamSetPeripheral(STM32_DMA2_STREAM4, &SDIO->FIFO);
NVICEnableVector(SDIO_IRQn,
CORTEX_PRIORITY_MASK(STM32_SDC_SDIO_IRQ_PRIORITY));
rccEnableSDIO(FALSE);
}
/* Configuration, card clock is initially stopped.*/
SDIO->POWER = 0;
SDIO->CLKCR = 0;
SDIO->DCTRL = 0;
SDIO->DTIMER = STM32_SDC_DATATIMEOUT;
}
/**
* @brief Deactivates the SDC peripheral.
*
* @param[in] sdcp pointer to the @p SDCDriver object
*
* @notapi
*/
void sdc_lld_stop(SDCDriver *sdcp) {
if ((sdcp->state == SDC_READY) || (sdcp->state == SDC_ACTIVE)) {
SDIO->POWER = 0;
SDIO->CLKCR = 0;
SDIO->DCTRL = 0;
SDIO->DTIMER = 0;
/* Clock deactivation.*/
NVICDisableVector(SDIO_IRQn);
dmaStreamRelease(STM32_DMA2_STREAM4);
rccDisableSDIO(FALSE);
}
}
/**
* @brief Starts the SDIO clock and sets it to init mode (400KHz or less).
*
* @param[in] sdcp pointer to the @p SDCDriver object
*
* @notapi
*/
void sdc_lld_start_clk(SDCDriver *sdcp) {
(void)sdcp;
/* Initial clock setting: 400KHz, 1bit mode.*/
SDIO->CLKCR = STM32_SDIO_DIV_LS;
SDIO->POWER |= SDIO_POWER_PWRCTRL_0 | SDIO_POWER_PWRCTRL_1;
SDIO->CLKCR |= SDIO_CLKCR_CLKEN;
}
/**
* @brief Sets the SDIO clock to data mode (25MHz or less).
*
* @param[in] sdcp pointer to the @p SDCDriver object
*
* @notapi
*/
void sdc_lld_set_data_clk(SDCDriver *sdcp) {
(void)sdcp;
SDIO->CLKCR = (SDIO->CLKCR & 0xFFFFFF00) | STM32_SDIO_DIV_HS;
}
/**
* @brief Stops the SDIO clock.
*
* @param[in] sdcp pointer to the @p SDCDriver object
*
* @notapi
*/
void sdc_lld_stop_clk(SDCDriver *sdcp) {
(void)sdcp;
SDIO->CLKCR = 0;
SDIO->POWER = 0;
}
/**
* @brief Switches the bus to 4 bits mode.
*
* @param[in] sdcp pointer to the @p SDCDriver object
* @param[in] mode bus mode
*
* @notapi
*/
void sdc_lld_set_bus_mode(SDCDriver *sdcp, sdcbusmode_t mode) {
uint32_t clk = SDIO->CLKCR & ~SDIO_CLKCR_WIDBUS;
(void)sdcp;
switch (mode) {
case SDC_MODE_1BIT:
SDIO->CLKCR = clk;
break;
case SDC_MODE_4BIT:
SDIO->CLKCR = clk | SDIO_CLKCR_WIDBUS_0;
break;
case SDC_MODE_8BIT:
SDIO->CLKCR = clk | SDIO_CLKCR_WIDBUS_1;
}
}
/**
* @brief Sends an SDIO command with no response expected.
*
* @param[in] sdcp pointer to the @p SDCDriver object
* @param[in] cmd card command
* @param[in] arg command argument
*
* @notapi
*/
void sdc_lld_send_cmd_none(SDCDriver *sdcp, uint8_t cmd, uint32_t arg) {
(void)sdcp;
SDIO->ARG = arg;
SDIO->CMD = (uint32_t)cmd | SDIO_CMD_CPSMEN;
while ((SDIO->STA & SDIO_STA_CMDSENT) == 0)
;
SDIO->ICR = SDIO_ICR_CMDSENTC;
}
/**
* @brief Sends an SDIO command with a short response expected.
* @note The CRC is not verified.
*
* @param[in] sdcp pointer to the @p SDCDriver object
* @param[in] cmd card command
* @param[in] arg command argument
* @param[out] resp pointer to the response buffer (one word)
* @return The operation status.
* @retval FALSE the operation succeeded.
* @retval TRUE the operation failed because timeout, CRC check or
* other errors.
*
* @notapi
*/
bool_t sdc_lld_send_cmd_short(SDCDriver *sdcp, uint8_t cmd, uint32_t arg,
uint32_t *resp) {
uint32_t sta;
(void)sdcp;
SDIO->ARG = arg;
SDIO->CMD = (uint32_t)cmd | SDIO_CMD_WAITRESP_0 | SDIO_CMD_CPSMEN;
while (((sta = SDIO->STA) & (SDIO_STA_CMDREND | SDIO_STA_CTIMEOUT |
SDIO_STA_CCRCFAIL)) == 0)
;
SDIO->ICR = SDIO_ICR_CMDRENDC | SDIO_ICR_CTIMEOUTC | SDIO_ICR_CCRCFAILC;
if ((sta & (SDIO_STA_CTIMEOUT)) != 0)
return TRUE;
*resp = SDIO->RESP1;
return FALSE;
}
/**
* @brief Sends an SDIO command with a short response expected and CRC.
*
* @param[in] sdcp pointer to the @p SDCDriver object
* @param[in] cmd card command
* @param[in] arg command argument
* @param[out] resp pointer to the response buffer (one word)
* @return The operation status.
* @retval FALSE the operation succeeded.
* @retval TRUE the operation failed because timeout, CRC check or
* other errors.
*
* @notapi
*/
bool_t sdc_lld_send_cmd_short_crc(SDCDriver *sdcp, uint8_t cmd, uint32_t arg,
uint32_t *resp) {
uint32_t sta;
(void)sdcp;
SDIO->ARG = arg;
SDIO->CMD = (uint32_t)cmd | SDIO_CMD_WAITRESP_0 | SDIO_CMD_CPSMEN;
while (((sta = SDIO->STA) & (SDIO_STA_CMDREND | SDIO_STA_CTIMEOUT |
SDIO_STA_CCRCFAIL)) == 0)
;
SDIO->ICR = SDIO_ICR_CMDRENDC | SDIO_ICR_CTIMEOUTC | SDIO_ICR_CCRCFAILC;
if ((sta & (SDIO_STA_CTIMEOUT | SDIO_STA_CCRCFAIL)) != 0)
return TRUE;
*resp = SDIO->RESP1;
return FALSE;
}
/**
* @brief Sends an SDIO command with a long response expected and CRC.
*
* @param[in] sdcp pointer to the @p SDCDriver object
* @param[in] cmd card command
* @param[in] arg command argument
* @param[out] resp pointer to the response buffer (four words)
* @return The operation status.
* @retval FALSE the operation succeeded.
* @retval TRUE the operation failed because timeout, CRC check or
* other errors.
*
* @notapi
*/
bool_t sdc_lld_send_cmd_long_crc(SDCDriver *sdcp, uint8_t cmd, uint32_t arg,
uint32_t *resp) {
uint32_t sta;
(void)sdcp;
SDIO->ARG = arg;
SDIO->CMD = (uint32_t)cmd | SDIO_CMD_WAITRESP_0 | SDIO_CMD_WAITRESP_1 |
SDIO_CMD_CPSMEN;
while (((sta = SDIO->STA) & (SDIO_STA_CMDREND | SDIO_STA_CTIMEOUT |
SDIO_STA_CCRCFAIL)) == 0)
;
SDIO->ICR = SDIO_ICR_CMDRENDC | SDIO_ICR_CTIMEOUTC | SDIO_ICR_CCRCFAILC;
if ((sta & (SDIO_STA_CTIMEOUT | SDIO_STA_CCRCFAIL)) != 0)
return TRUE;
*resp = SDIO->RESP1;
return FALSE;
}
/**
* @brief Reads one or more blocks.
*
* @param[in] sdcp pointer to the @p SDCDriver object
* @param[in] startblk first block to read
* @param[out] buf pointer to the read buffer
* @param[in] n number of blocks to read
* @return The operation status.
* @retval FALSE operation succeeded, the requested blocks have been
* read.
* @retval TRUE operation failed, the state of the buffer is uncertain.
*
* @notapi
*/
bool_t sdc_lld_read(SDCDriver *sdcp, uint32_t startblk,
uint8_t *buf, uint32_t n) {
#if STM32_SDC_UNALIGNED_SUPPORT
if (((unsigned)buf & 3) != 0) {
uint32_t i;
for (i = 0; i < n; i++) {
if (sdc_lld_read_single(sdcp, startblk, u.buf))
return TRUE;
memcpy(buf, u.buf, SDC_BLOCK_SIZE);
buf += SDC_BLOCK_SIZE;
startblk++;
}
return FALSE;
}
#endif
if (n == 1)
return sdc_lld_read_single(sdcp, startblk, buf);
return sdc_lld_read_multiple(sdcp, startblk, buf, n);
}
/**
* @brief Writes one or more blocks.
*
* @param[in] sdcp pointer to the @p SDCDriver object
* @param[in] startblk first block to write
* @param[out] buf pointer to the write buffer
* @param[in] n number of blocks to write
* @return The operation status.
* @retval FALSE operation succeeded, the requested blocks have been
* written.
* @retval TRUE operation failed.
*
* @notapi
*/
bool_t sdc_lld_write(SDCDriver *sdcp, uint32_t startblk,
const uint8_t *buf, uint32_t n) {
#if STM32_SDC_UNALIGNED_SUPPORT
if (((unsigned)buf & 3) != 0) {
uint32_t i;
for (i = 0; i < n; i++) {
memcpy(u.buf, buf, SDC_BLOCK_SIZE);
buf += SDC_BLOCK_SIZE;
if (sdc_lld_write_single(sdcp, startblk, u.buf))
return TRUE;
startblk++;
}
return FALSE;
}
#endif
if (n == 1)
return sdc_lld_write_single(sdcp, startblk, buf);
return sdc_lld_write_multiple(sdcp, startblk, buf, n);
}
#endif /* HAL_USE_SDC */
/** @} */