/* ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio. This file is part of ChibiOS/RT. ChibiOS/RT is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. ChibiOS/RT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ /** * @file STM32/hal_lld.c * @brief STM32 HAL subsystem low level driver source. * * @addtogroup HAL * @{ */ #include "ch.h" #include "hal.h" #define AIRCR_VECTKEY 0x05FA0000 /*===========================================================================*/ /* Driver exported variables. */ /*===========================================================================*/ /*===========================================================================*/ /* Driver local variables. */ /*===========================================================================*/ /*===========================================================================*/ /* Driver local functions. */ /*===========================================================================*/ /*===========================================================================*/ /* Driver interrupt handlers. */ /*===========================================================================*/ /*===========================================================================*/ /* Driver exported functions. */ /*===========================================================================*/ /** * @brief Low level HAL driver initialization. * * @notapi */ void hal_lld_init(void) { /* SysTick initialization using the system clock.*/ SysTick->LOAD = STM32_HCLK / CH_FREQUENCY - 1; SysTick->VAL = 0; SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | SysTick_CTRL_ENABLE_Msk | SysTick_CTRL_TICKINT_Msk; #if HAL_USE_ADC || HAL_USE_SPI || HAL_USE_UART dmaInit(); #endif } /** * @brief STM32 clocks and PLL initialization. * @note All the involved constants come from the file @p board.h. * @note This function must be invoked only after the system reset. * * @special */ #if defined(STM32F10X_LD) || defined(STM32F10X_MD) || \ defined(STM32F10X_HD) || defined(STM32F10X_LD_VL) || \ defined(STM32F10X_MD_VL) || defined(__DOXYGEN__) /* * Clocks initialization for the LD, MD and HD sub-families. */ void stm32_clock_init(void) { /* HSI setup, it enforces the reset situation in order to handle possible problems with JTAG probes and re-initializations.*/ RCC->CR |= RCC_CR_HSION; /* Make sure HSI is ON. */ while (!(RCC->CR & RCC_CR_HSIRDY)) ; /* Wait until HSI is stable. */ RCC->CR &= RCC_CR_HSITRIM | RCC_CR_HSION; /* CR Reset value. */ RCC->CFGR = 0; /* CFGR reset value. */ while ((RCC->CFGR & RCC_CFGR_SWS) != RCC_CFGR_SWS_HSI) ; /* Wait until HSI is the source.*/ /* HSE setup, it is only performed if the HSE clock is selected as source of the system clock (directly or through the PLL).*/ #if (STM32_SW == STM32_SW_HSE) || \ ((STM32_SW == STM32_SW_PLL) && (STM32_PLLSRC == STM32_PLLSRC_HSE)) RCC->CR |= RCC_CR_HSEON; while (!(RCC->CR & RCC_CR_HSERDY)) ; /* Waits until HSE is stable. */ #endif /* PLL setup, it is only performed if the PLL is the selected source of the system clock else it is left disabled.*/ #if STM32_SW == STM32_SW_PLL RCC->CFGR |= STM32_PLLMUL | STM32_PLLXTPRE | STM32_PLLSRC; RCC->CR |= RCC_CR_PLLON; while (!(RCC->CR & RCC_CR_PLLRDY)) ; /* Waits until PLL is stable. */ #endif /* Clock settings.*/ #if STM32_HAS_USB RCC->CFGR = STM32_MCO | STM32_USBPRE | STM32_PLLMUL | STM32_PLLXTPRE | STM32_PLLSRC | STM32_ADCPRE | STM32_PPRE2 | STM32_PPRE1 | STM32_HPRE; #else RCC->CFGR = STM32_MCO | STM32_PLLMUL | STM32_PLLXTPRE | STM32_PLLSRC | STM32_ADCPRE | STM32_PPRE2 | STM32_PPRE1 | STM32_HPRE; #endif /* Flash setup and final clock selection. */ FLASH->ACR = STM32_FLASHBITS; /* Flash wait states depending on clock. */ /* Switching on the configured clock source if it is different from HSI.*/ #if (STM32_SW != STM32_SW_HSI) RCC->CFGR |= STM32_SW; /* Switches on the selected clock source. */ while ((RCC->CFGR & RCC_CFGR_SWS) != (STM32_SW << 2)) ; #endif } #elif defined(STM32F10X_CL) /* * Clocks initialization for the CL sub-family. */ void stm32_clock_init(void) { /* HSI setup, it enforces the reset situation in order to handle possible problems with JTAG probes and re-initializations.*/ RCC->CR |= RCC_CR_HSION; /* Make sure HSI is ON. */ while (!(RCC->CR & RCC_CR_HSIRDY)) ; /* Wait until HSI is stable. */ RCC->CR &= RCC_CR_HSITRIM | RCC_CR_HSION; /* CR Reset value. */ RCC->CFGR = 0; /* CFGR reset value. */ while ((RCC->CFGR & RCC_CFGR_SWS) != RCC_CFGR_SWS_HSI) ; /* Wait until HSI is the source.*/ RCC->CFGR2 = 0; /* HSE setup, it is only performed if the HSE clock is selected as source of the system clock (directly or through the PLLs).*/ #if (STM32_SW == STM32_SW_HSE) || \ ((STM32_SW == STM32_SW_PLL) && (STM32_PLLSRC == STM32_PLLSRC_PREDIV1)) RCC->CR |= RCC_CR_HSEON; while (!(RCC->CR & RCC_CR_HSERDY)) ; /* Waits until HSE is stable. */ #endif /* PLL2 setup, it is only performed if the PLL2 clock is selected as source for the PLL clock else it is left disabled.*/ #if STM32_SW == STM32_SW_PLL #if STM32_PREDIV1SRC == STM32_PREDIV1SRC_PLL2 RCC->CFGR2 |= STM32_PREDIV2 | STM32_PLL2MUL; RCC->CR |= RCC_CR_PLL2ON; while (!(RCC->CR & RCC_CR_PLL2RDY)) ; /* Waits until PLL is stable. */ #endif /* PLL setup, it is only performed if the PLL is the selected source of the system clock else it is left disabled.*/ RCC->CFGR2 |= STM32_PREDIV1 | STM32_PREDIV1SRC; RCC->CFGR |= STM32_PLLMUL | STM32_PLLSRC; RCC->CR |= RCC_CR_PLLON; while (!(RCC->CR & RCC_CR_PLLRDY)) ; /* Waits until PLL2 is stable. */ #endif /* Clock settings.*/ #if STM32_HAS_OTG1 RCC->CFGR = STM32_MCO | STM32_OTGFSPRE | STM32_PLLMUL | STM32_PLLSRC | STM32_ADCPRE | STM32_PPRE2 | STM32_PPRE1 | STM32_HPRE; #else RCC->CFGR = STM32_MCO | STM32_PLLMUL | STM32_PLLSRC | STM32_ADCPRE | STM32_PPRE2 | STM32_PPRE1 | STM32_HPRE; #endif /* Flash setup and final clock selection. */ FLASH->ACR = STM32_FLASHBITS; /* Flash wait states depending on clock. */ /* Switching on the configured clock source if it is different from HSI.*/ #if (STM32_SW != STM32_SW_HSI) RCC->CFGR |= STM32_SW; /* Switches on the selected clock source. */ while ((RCC->CFGR & RCC_CFGR_SWS) != (STM32_SW << 2)) ; #endif } #else void stm32_clock_init(void) {} #endif /** @} */