/* * Licensed under ST Liberty SW License Agreement V2, (the "License"); * You may not use this file except in compliance with the License. * You may obtain a copy of the License at: * * http://www.st.com/software_license_agreement_liberty_v2 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ /** * @file SPC560BCxx/hal_lld.h * @brief SPC560B/Cxx HAL subsystem low level driver header. * @pre This module requires the following macros to be defined in the * @p board.h file: * - SPC5_XOSC_CLK. * - SPC5_OSC_BYPASS (optionally). * . * * @addtogroup HAL * @{ */ #ifndef _HAL_LLD_H_ #define _HAL_LLD_H_ #include "xpc560bc.h" #include "spc560bc_registry.h" /*===========================================================================*/ /* Driver constants. */ /*===========================================================================*/ /** * @brief Defines the support for realtime counters in the HAL. */ #define HAL_IMPLEMENTS_COUNTERS FALSE /** * @name Platform identification * @{ */ #define PLATFORM_NAME "SPC560B/Cxx Car Body and Convenience" /** @} */ /** * @name Absolute Maximum Ratings * @{ */ /** * @brief Maximum XOSC clock frequency. */ #define SPC5_XOSC_CLK_MAX 16000000 /** * @brief Minimum XOSC clock frequency. */ #define SPC5_XOSC_CLK_MIN 4000000 /** * @brief Maximum SXOSC clock frequency. */ #define SPC5_SXOSC_CLK_MAX 40000 /** * @brief Minimum SXOSC clock frequency. */ #define SPC5_SXOSC_CLK_MIN 32000 /** * @brief Maximum FMPLLs input clock frequency. */ #define SPC5_FMPLLIN_MIN 4000000 /** * @brief Maximum FMPLLs input clock frequency. */ #define SPC5_FMPLLIN_MAX 64000000 /** * @brief Maximum FMPLLs VCO clock frequency. */ #define SPC5_FMPLLVCO_MAX 512000000 /** * @brief Maximum FMPLLs VCO clock frequency. */ #define SPC5_FMPLLVCO_MIN 256000000 /** * @brief Maximum FMPLL0 output clock frequency. */ #define SPC5_FMPLL0_CLK_MAX 64000000 /** @} */ /** * @name Internal clock sources * @{ */ #define SPC5_IRC_CLK 16000000 /**< Internal fast RC oscillator. */ #define SPC5_SIRC_CLK 128000 /**< Internal RC slow oscillator. */ /** @} */ /** * @name FMPLL_CR register bits definitions * @{ */ #define SPC5_FMPLL_ODF_DIV2 (0U << 24) #define SPC5_FMPLL_ODF_DIV4 (1U << 24) #define SPC5_FMPLL_ODF_DIV8 (2U << 24) #define SPC5_FMPLL_ODF_DIV16 (3U << 24) /** @} */ /** * @name ME_GS register bits definitions * @{ */ #define SPC5_ME_GS_SYSCLK_MASK (15U << 0) #define SPC5_ME_GS_SYSCLK_IRC (0U << 0) #define SPC5_ME_GS_SYSCLK_DIVIRC (1U << 0) #define SPC5_ME_GS_SYSCLK_XOSC (2U << 0) #define SPC5_ME_GS_SYSCLK_DIVXOSC (3U << 0) #define SPC5_ME_GS_SYSCLK_FMPLL0 (4U << 0) /** @} */ /** * @name ME_ME register bits definitions * @{ */ #define SPC5_ME_ME_RESET (1U << 0) #define SPC5_ME_ME_TEST (1U << 1) #define SPC5_ME_ME_SAFE (1U << 2) #define SPC5_ME_ME_DRUN (1U << 3) #define SPC5_ME_ME_RUN0 (1U << 4) #define SPC5_ME_ME_RUN1 (1U << 5) #define SPC5_ME_ME_RUN2 (1U << 6) #define SPC5_ME_ME_RUN3 (1U << 7) #define SPC5_ME_ME_HALT0 (1U << 8) #define SPC5_ME_ME_STOP0 (1U << 10) #define SPC5_ME_ME_STANDBY0 (1U << 13) /** @} */ /** * @name ME_xxx_MC registers bits definitions * @{ */ #define SPC5_ME_MC_SYSCLK_MASK (15U << 0) #define SPC5_ME_MC_SYSCLK(n) ((n) << 0) #define SPC5_ME_MC_SYSCLK_IRC SPC5_ME_MC_SYSCLK(0) #define SPC5_ME_MC_SYSCLK_DIVIRC SPC5_ME_MC_SYSCLK(1) #define SPC5_ME_MC_SYSCLK_XOSC SPC5_ME_MC_SYSCLK(2) #define SPC5_ME_MC_SYSCLK_DIVXOSC SPC5_ME_MC_SYSCLK(3) #define SPC5_ME_MC_SYSCLK_FMPLL0 SPC5_ME_MC_SYSCLK(4) #define SPC5_ME_MC_SYSCLK_DISABLED SPC5_ME_MC_SYSCLK(15) #define SPC5_ME_MC_IRCON (1U << 4) #define SPC5_ME_MC_XOSC0ON (1U << 5) #define SPC5_ME_MC_PLL0ON (1U << 6) #define SPC5_ME_MC_CFLAON_MASK (3U << 16) #define SPC5_ME_MC_CFLAON(n) ((n) << 16) #define SPC5_ME_MC_CFLAON_PD (1U << 16) #define SPC5_ME_MC_CFLAON_LP (2U << 16) #define SPC5_ME_MC_CFLAON_NORMAL (3U << 16) #define SPC5_ME_MC_DFLAON_MASK (3U << 18) #define SPC5_ME_MC_DFLAON(n) ((n) << 18) #define SPC5_ME_MC_DFLAON_PD (1U << 18) #define SPC5_ME_MC_DFLAON_LP (2U << 18) #define SPC5_ME_MC_DFLAON_NORMAL (3U << 18) #define SPC5_ME_MC_MVRON (1U << 20) #define SPC5_ME_MC_PDO (1U << 23) /** @} */ /** * @name ME_MCTL register bits definitions * @{ */ #define SPC5_ME_MCTL_KEY 0x5AF0U #define SPC5_ME_MCTL_KEY_INV 0xA50FU #define SPC5_ME_MCTL_MODE_MASK (15U << 28) #define SPC5_ME_MCTL_MODE(n) ((n) << 28) /** @} */ /** * @name ME_RUN_PCx registers bits definitions * @{ */ #define SPC5_ME_RUN_PC_TEST (1U << 1) #define SPC5_ME_RUN_PC_SAFE (1U << 2) #define SPC5_ME_RUN_PC_DRUN (1U << 3) #define SPC5_ME_RUN_PC_RUN0 (1U << 4) #define SPC5_ME_RUN_PC_RUN1 (1U << 5) #define SPC5_ME_RUN_PC_RUN2 (1U << 6) #define SPC5_ME_RUN_PC_RUN3 (1U << 7) /** @} */ /** * @name ME_LP_PCx registers bits definitions * @{ */ #define SPC5_ME_LP_PC_HALT0 (1U << 8) #define SPC5_ME_LP_PC_STOP0 (1U << 10) #define SPC5_ME_LP_PC_STANDBY0 (1U << 10) /** @} */ /** * @name ME_PCTL registers bits definitions * @{ */ #define SPC5_ME_PCTL_RUN_MASK (7U << 0) #define SPC5_ME_PCTL_RUN(n) ((n) << 0) #define SPC5_ME_PCTL_LP_MASK (7U << 3) #define SPC5_ME_PCTL_LP(n) ((n) << 3) #define SPC5_ME_PCTL_DBG (1U << 6) /** @} */ /*===========================================================================*/ /* Driver pre-compile time settings. */ /*===========================================================================*/ /** * @brief Disables the clocks initialization in the HAL. */ #if !defined(SPC5_NO_INIT) || defined(__DOXYGEN__) #define SPC5_NO_INIT FALSE #endif /** * @brief Disables the overclock checks. */ #if !defined(SPC5_ALLOW_OVERCLOCK) || defined(__DOXYGEN__) #define SPC5_ALLOW_OVERCLOCK FALSE #endif /** * @brief XOSC divider value. * @note The allowed range is 1...32. */ #if !defined(SPC5_XOSCDIV_VALUE) || defined(__DOXYGEN__) #define SPC5_XOSCDIV_VALUE 1 #endif /** * @brief Fast IRC divider value. * @note The allowed range is 1...32. */ #if !defined(SPC5_IRCDIV_VALUE) || defined(__DOXYGEN__) #define SPC5_IRCDIV_VALUE 1 #endif /** * @brief FMPLL0 IDF divider value. * @note The default value is calculated for XOSC=8MHz and PHI=64MHz. */ #if !defined(SPC5_FMPLL0_IDF_VALUE) || defined(__DOXYGEN__) #define SPC5_FMPLL0_IDF_VALUE 1 #endif /** * @brief FMPLL0 NDIV divider value. * @note The default value is calculated for XOSC=8MHz and PHI=64MHz. */ #if !defined(SPC5_FMPLL0_NDIV_VALUE) || defined(__DOXYGEN__) #define SPC5_FMPLL0_NDIV_VALUE 32 #endif /** * @brief FMPLL0 ODF divider value. * @note The default value is calculated for XOSC=8MHz and PHI=64MHz. */ #if !defined(SPC5_FMPLL0_ODF) || defined(__DOXYGEN__) #define SPC5_FMPLL0_ODF SPC5_FMPLL_ODF_DIV4 #endif /** * @brief Active run modes in ME_ME register. * @note Modes RESET, SAFE, DRUN, and RUN0 modes are always enabled, there * is no need to specify them. */ #if !defined(SPC5_ME_ME_BITS) || defined(__DOXYGEN__) #define SPC5_ME_ME_BITS (SPC5_ME_ME_RUN1 | \ SPC5_ME_ME_RUN2 | \ SPC5_ME_ME_RUN3 | \ SPC5_ME_ME_HALT0 | \ SPC5_ME_ME_STOP0 | \ SPC5_ME_ME_STANDBY0) #endif /** * @brief TEST mode settings. */ #if !defined(SPC5_ME_TEST_MC_BITS) || defined(__DOXYGEN__) #define SPC5_ME_TEST_MC_BITS (SPC5_ME_MC_SYSCLK_IRC | \ SPC5_ME_MC_IRCON | \ SPC5_ME_MC_XOSC0ON | \ SPC5_ME_MC_PLL0ON | \ SPC5_ME_MC_CFLAON_NORMAL | \ SPC5_ME_MC_DFLAON_NORMAL | \ SPC5_ME_MC_MVRON) #endif /** * @brief SAFE mode settings. */ #if !defined(SPC5_ME_SAFE_MC_BITS) || defined(__DOXYGEN__) #define SPC5_ME_SAFE_MC_BITS (SPC5_ME_MC_PDO) #endif /** * @brief DRUN mode settings. */ #if !defined(SPC5_ME_DRUN_MC_BITS) || defined(__DOXYGEN__) #define SPC5_ME_DRUN_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ SPC5_ME_MC_IRCON | \ SPC5_ME_MC_XOSC0ON | \ SPC5_ME_MC_PLL0ON | \ SPC5_ME_MC_CFLAON_NORMAL | \ SPC5_ME_MC_DFLAON_NORMAL | \ SPC5_ME_MC_MVRON) #endif /** * @brief RUN0 mode settings. */ #if !defined(SPC5_ME_RUN0_MC_BITS) || defined(__DOXYGEN__) #define SPC5_ME_RUN0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ SPC5_ME_MC_IRCON | \ SPC5_ME_MC_XOSC0ON | \ SPC5_ME_MC_PLL0ON | \ SPC5_ME_MC_CFLAON_NORMAL | \ SPC5_ME_MC_DFLAON_NORMAL | \ SPC5_ME_MC_MVRON) #endif /** * @brief RUN1 mode settings. */ #if !defined(SPC5_ME_RUN1_MC_BITS) || defined(__DOXYGEN__) #define SPC5_ME_RUN1_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ SPC5_ME_MC_IRCON | \ SPC5_ME_MC_XOSC0ON | \ SPC5_ME_MC_PLL0ON | \ SPC5_ME_MC_CFLAON_NORMAL | \ SPC5_ME_MC_DFLAON_NORMAL | \ SPC5_ME_MC_MVRON) #endif /** * @brief RUN2 mode settings. */ #if !defined(SPC5_ME_RUN2_MC_BITS) || defined(__DOXYGEN__) #define SPC5_ME_RUN2_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ SPC5_ME_MC_IRCON | \ SPC5_ME_MC_XOSC0ON | \ SPC5_ME_MC_PLL0ON | \ SPC5_ME_MC_CFLAON_NORMAL | \ SPC5_ME_MC_DFLAON_NORMAL | \ SPC5_ME_MC_MVRON) #endif /** * @brief RUN3 mode settings. */ #if !defined(SPC5_ME_RUN3_MC_BITS) || defined(__DOXYGEN__) #define SPC5_ME_RUN3_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ SPC5_ME_MC_IRCON | \ SPC5_ME_MC_XOSC0ON | \ SPC5_ME_MC_PLL0ON | \ SPC5_ME_MC_CFLAON_NORMAL | \ SPC5_ME_MC_DFLAON_NORMAL | \ SPC5_ME_MC_MVRON) #endif /** * @brief HALT0 mode settings. */ #if !defined(SPC5_ME_HALT0_MC_BITS) || defined(__DOXYGEN__) #define SPC5_ME_HALT0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ SPC5_ME_MC_IRCON | \ SPC5_ME_MC_XOSC0ON | \ SPC5_ME_MC_PLL0ON | \ SPC5_ME_MC_CFLAON_NORMAL | \ SPC5_ME_MC_DFLAON_NORMAL | \ SPC5_ME_MC_MVRON) #endif /** * @brief STOP0 mode settings. */ #if !defined(SPC5_ME_STOP0_MC_BITS) || defined(__DOXYGEN__) #define SPC5_ME_STOP0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ SPC5_ME_MC_IRCON | \ SPC5_ME_MC_XOSC0ON | \ SPC5_ME_MC_PLL0ON | \ SPC5_ME_MC_CFLAON_NORMAL | \ SPC5_ME_MC_DFLAON_NORMAL | \ SPC5_ME_MC_MVRON) #endif /** * @brief STANDBY0 mode settings. */ #if !defined(SPC5_ME_STANDBY0_MC_BITS) || defined(__DOXYGEN__) #define SPC5_ME_STANDBY0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ SPC5_ME_MC_IRCON | \ SPC5_ME_MC_XOSC0ON | \ SPC5_ME_MC_PLL0ON | \ SPC5_ME_MC_CFLAON_NORMAL | \ SPC5_ME_MC_DFLAON_NORMAL | \ SPC5_ME_MC_MVRON) #endif /** * @brief Peripheral mode 0 (run mode). * @note Do not change this setting, it is expected to be the "never run" * mode. */ #if !defined(SPC5_ME_RUN_PC0_BITS) || defined(__DOXYGEN__) #define SPC5_ME_RUN_PC0_BITS 0 #endif /** * @brief Peripheral mode 1 (run mode). * @note Do not change this setting, it is expected to be the "always run" * mode. */ #if !defined(SPC5_ME_RUN_PC1_BITS) || defined(__DOXYGEN__) #define SPC5_ME_RUN_PC1_BITS (SPC5_ME_RUN_PC_TEST | \ SPC5_ME_RUN_PC_SAFE | \ SPC5_ME_RUN_PC_DRUN | \ SPC5_ME_RUN_PC_RUN0 | \ SPC5_ME_RUN_PC_RUN1 | \ SPC5_ME_RUN_PC_RUN2 | \ SPC5_ME_RUN_PC_RUN3) #endif /** * @brief Peripheral mode 2 (run mode). * @note Do not change this setting, it is expected to be the "only during * normal run" mode. */ #if !defined(SPC5_ME_RUN_PC2_BITS) || defined(__DOXYGEN__) #define SPC5_ME_RUN_PC2_BITS (SPC5_ME_RUN_PC_DRUN | \ SPC5_ME_RUN_PC_RUN0 | \ SPC5_ME_RUN_PC_RUN1 | \ SPC5_ME_RUN_PC_RUN2 | \ SPC5_ME_RUN_PC_RUN3) #endif /** * @brief Peripheral mode 3 (run mode). * @note Not defined, available to application-specific modes. */ #if !defined(SPC5_ME_RUN_PC3_BITS) || defined(__DOXYGEN__) #define SPC5_ME_RUN_PC3_BITS (SPC5_ME_RUN_PC_RUN0 | \ SPC5_ME_RUN_PC_RUN1 | \ SPC5_ME_RUN_PC_RUN2 | \ SPC5_ME_RUN_PC_RUN3) #endif /** * @brief Peripheral mode 4 (run mode). * @note Not defined, available to application-specific modes. */ #if !defined(SPC5_ME_RUN_PC4_BITS) || defined(__DOXYGEN__) #define SPC5_ME_RUN_PC4_BITS (SPC5_ME_RUN_PC_RUN0 | \ SPC5_ME_RUN_PC_RUN1 | \ SPC5_ME_RUN_PC_RUN2 | \ SPC5_ME_RUN_PC_RUN3) #endif /** * @brief Peripheral mode 5 (run mode). * @note Not defined, available to application-specific modes. */ #if !defined(SPC5_ME_RUN_PC5_BITS) || defined(__DOXYGEN__) #define SPC5_ME_RUN_PC5_BITS (SPC5_ME_RUN_PC_RUN0 | \ SPC5_ME_RUN_PC_RUN1 | \ SPC5_ME_RUN_PC_RUN2 | \ SPC5_ME_RUN_PC_RUN3) #endif /** * @brief Peripheral mode 6 (run mode). * @note Not defined, available to application-specific modes. */ #if !defined(SPC5_ME_RUN_PC6_BITS) || defined(__DOXYGEN__) #define SPC5_ME_RUN_PC6_BITS (SPC5_ME_RUN_PC_RUN0 | \ SPC5_ME_RUN_PC_RUN1 | \ SPC5_ME_RUN_PC_RUN2 | \ SPC5_ME_RUN_PC_RUN3) #endif /** * @brief Peripheral mode 7 (run mode). * @note Not defined, available to application-specific modes. */ #if !defined(SPC5_ME_RUN_PC7_BITS) || defined(__DOXYGEN__) #define SPC5_ME_RUN_PC7_BITS (SPC5_ME_RUN_PC_RUN0 | \ SPC5_ME_RUN_PC_RUN1 | \ SPC5_ME_RUN_PC_RUN2 | \ SPC5_ME_RUN_PC_RUN3) #endif /** * @brief Peripheral mode 0 (low power mode). * @note Do not change this setting, it is expected to be the "never run" * mode. */ #if !defined(SPC5_ME_LP_PC0_BITS) || defined(__DOXYGEN__) #define SPC5_ME_LP_PC0_BITS 0 #endif /** * @brief Peripheral mode 1 (low power mode). * @note Do not change this setting, it is expected to be the "always run" * mode. */ #if !defined(SPC5_ME_LP_PC1_BITS) || defined(__DOXYGEN__) #define SPC5_ME_LP_PC1_BITS (SPC5_ME_LP_PC_HALT0 | \ SPC5_ME_LP_PC_STOP0 | \ SPC5_ME_LP_PC_STANDBY0) #endif /** * @brief Peripheral mode 2 (low power mode). * @note Do not change this setting, it is expected to be the "halt only" * mode. */ #if !defined(SPC5_ME_LP_PC2_BITS) || defined(__DOXYGEN__) #define SPC5_ME_LP_PC2_BITS (SPC5_ME_LP_PC_HALT0) #endif /** * @brief Peripheral mode 3 (low power mode). * @note Do not change this setting, it is expected to be the "stop only" * mode. */ #if !defined(SPC5_ME_LP_PC3_BITS) || defined(__DOXYGEN__) #define SPC5_ME_LP_PC3_BITS (SPC5_ME_LP_PC_STOP0) #endif /** * @brief Peripheral mode 4 (low power mode). * @note Not defined, available to application-specific modes. */ #if !defined(SPC5_ME_LP_PC4_BITS) || defined(__DOXYGEN__) #define SPC5_ME_LP_PC4_BITS (SPC5_ME_LP_PC_HALT0 | \ SPC5_ME_LP_PC_STOP0) #endif /** * @brief Peripheral mode 5 (low power mode). * @note Not defined, available to application-specific modes. */ #if !defined(SPC5_ME_LP_PC5_BITS) || defined(__DOXYGEN__) #define SPC5_ME_LP_PC5_BITS (SPC5_ME_LP_PC_HALT0 | \ SPC5_ME_LP_PC_STOP0) #endif /** * @brief Peripheral mode 6 (low power mode). * @note Not defined, available to application-specific modes. */ #if !defined(SPC5_ME_LP_PC6_BITS) || defined(__DOXYGEN__) #define SPC5_ME_LP_PC6_BITS (SPC5_ME_LP_PC_HALT0 | \ SPC5_ME_LP_PC_STOP0) #endif /** * @brief Peripheral mode 7 (low power mode). * @note Not defined, available to application-specific modes. */ #if !defined(SPC5_ME_LP_PC7_BITS) || defined(__DOXYGEN__) #define SPC5_ME_LP_PC7_BITS (SPC5_ME_LP_PC_HALT0 | \ SPC5_ME_LP_PC_STOP0) #endif /** * @brief PIT channel 0 IRQ priority. * @note This PIT channel is allocated permanently for system tick * generation. */ #if !defined(SPC5_PIT0_IRQ_PRIORITY) || defined(__DOXYGEN__) #define SPC5_PIT0_IRQ_PRIORITY 4 #endif /*===========================================================================*/ /* Derived constants and error checks. */ /*===========================================================================*/ /* * Configuration-related checks. */ #if !defined(SPC560BCxx_MCUCONF) #error "Using a wrong mcuconf.h file, SPC560BCxx_MCUCONF not defined" #endif /* Check on the XOSC frequency.*/ #if (SPC5_XOSC_CLK < SPC5_XOSC_CLK_MIN) || \ (SPC5_XOSC_CLK > SPC5_XOSC_CLK_MAX) #error "invalid SPC5_XOSC_CLK value specified" #endif /* Check on the XOSC divider.*/ #if (SPC5_XOSCDIV_VALUE < 1) || (SPC5_XOSCDIV_VALUE > 32) #error "invalid SPC5_XOSCDIV_VALUE value specified" #endif /* Check on the IRC divider.*/ #if (SPC5_IRCDIV_VALUE < 1) || (SPC5_IRCDIV_VALUE > 32) #error "invalid SPC5_IRCDIV_VALUE value specified" #endif /* Check on SPC5_FMPLL0_IDF_VALUE.*/ #if (SPC5_FMPLL0_IDF_VALUE < 1) || (SPC5_FMPLL0_IDF_VALUE > 15) #error "invalid SPC5_FMPLL0_IDF_VALUE value specified" #endif /* Check on SPC5_FMPLL0_NDIV_VALUE.*/ #if (SPC5_FMPLL0_NDIV_VALUE < 32) || (SPC5_FMPLL0_NDIV_VALUE > 96) #error "invalid SPC5_FMPLL0_NDIV_VALUE value specified" #endif /* Check on SPC5_FMPLL0_ODF.*/ #if (SPC5_FMPLL0_ODF == SPC5_FMPLL_ODF_DIV2) #define SPC5_FMPLL0_ODF_VALUE 2 #elif (SPC5_FMPLL0_ODF == SPC5_FMPLL_ODF_DIV4) #define SPC5_FMPLL0_ODF_VALUE 4 #elif (SPC5_FMPLL0_ODF == SPC5_FMPLL_ODF_DIV8) #define SPC5_FMPLL0_ODF_VALUE 8 #elif (SPC5_FMPLL0_ODF == SPC5_FMPLL_ODF_DIV16) #define SPC5_FMPLL0_ODF_VALUE 16 #else #error "invalid SPC5_FMPLL0_ODF value specified" #endif /** * @brief SPC5_FMPLL0_VCO_CLK clock point. */ #define SPC5_FMPLL0_VCO_CLK \ ((SPC5_XOSC_CLK / SPC5_FMPLL0_IDF_VALUE) * SPC5_FMPLL0_NDIV_VALUE) /* Check on FMPLL0 VCO output.*/ #if (SPC5_FMPLL0_VCO_CLK < SPC5_FMPLLVCO_MIN) || \ (SPC5_FMPLL0_VCO_CLK > SPC5_FMPLLVCO_MAX) #error "SPC5_FMPLL0_CLK outside acceptable range (SPC5_FMPLLVCO_MIN...SPC5_FMPLLVCO_MAX)" #endif /** * @brief SPC5_FMPLL0_CLK clock point. */ #define SPC5_FMPLL0_CLK \ (SPC5_FMPLL0_VCO_CLK / SPC5_FMPLL0_ODF_VALUE) /* Check on SPC5_FMPLL0_CLK.*/ #if (SPC5_FMPLL0_CLK > SPC5_FMPLL0_CLK_MAX) && !SPC5_ALLOW_OVERCLOCK #error "SPC5_FMPLL0_CLK outside acceptable range (0...SPC5_FMPLL0_CLK_MAX)" #endif /*===========================================================================*/ /* Driver data structures and types. */ /*===========================================================================*/ typedef enum { SPC5_RUNMODE_TEST = 1, SPC5_RUNMODE_SAFE = 2, SPC5_RUNMODE_DRUN = 3, SPC5_RUNMODE_RUN0 = 4, SPC5_RUNMODE_RUN1 = 5, SPC5_RUNMODE_RUN2 = 6, SPC5_RUNMODE_RUN3 = 7, SPC5_RUNMODE_HALT0 = 8, SPC5_RUNMODE_STOP0 = 10 } spc560prunmode_t; /*===========================================================================*/ /* Driver macros. */ /*===========================================================================*/ /*===========================================================================*/ /* External declarations. */ /*===========================================================================*/ #ifdef __cplusplus extern "C" { #endif void hal_lld_init(void); void spc_clock_init(void); bool_t halSPCSetRunMode(spc560prunmode_t mode); void halSPCSetPeripheralClockMode(uint32_t n, uint32_t pctl); #if !SPC5_NO_INIT uint32_t halSPCGetSystemClock(void); #endif #ifdef __cplusplus } #endif #endif /* _HAL_LLD_H_ */ /** @} */