/*
ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see .
*/
/**
* @file MSP430/pal_lld.h
* @brief MSP430 Digital I/O low level driver header
* @addtogroup MSP430_PAL
* @{
*/
#ifndef _PAL_LLD_H_
#define _PAL_LLD_H_
#include
/*===========================================================================*/
/* Unsupported modes and specific modes */
/*===========================================================================*/
#undef PAL_MODE_INPUT_PULLUP
#undef PAL_MODE_INPUT_PULLDOWN
#undef PAL_MODE_INPUT_ANALOG
#undef PAL_MODE_OUTPUT_OPENDRAIN
/*===========================================================================*/
/* I/O Ports Types and constants. */
/*===========================================================================*/
/**
* @brief Simplified MSP430 I/O port representation.
* @details This structure represents the common part of all the MSP430 I/O
* ports.
*/
struct port_common_t {
ioregister_t in;
ioregister_t out;
ioregister_t dir;
};
/**
* @brief Generic MSP430 I/O port.
*/
union __ioport {
struct port_common_t iop_common;
struct port_simple_t iop_simple;
struct port_full_t iop_full;
};
/**
* @brief Setup registers common to all the MSP430 ports.
*/
typedef struct {
ioregister_t out;
ioregister_t dir;
} msp430_dio_setup_t;
/**
* @brief MSP430 I/O ports static initializer.
* @details An instance of this structure must be passed to @p palInit() at
* system startup time in order to initialize the digital I/O
* subsystem. This represents only the initial setup, specific pads
* or whole ports can be reprogrammed at later time.
*/
typedef struct {
#if defined(__MSP430_HAS_PORT1__) || \
defined(__MSP430_HAS_PORT1_R__) || \
defined(__DOXYGEN__)
/** @brief Port 1 setup data.*/
msp430_dio_setup_t P1Data;
#endif
#if defined(__MSP430_HAS_PORT2__) || \
defined(__MSP430_HAS_PORT2_R__) || \
defined(__DOXYGEN__)
/** @brief Port 2 setup data.*/
msp430_dio_setup_t P2Data;
#endif
#if defined(__MSP430_HAS_PORT3__) || \
defined(__MSP430_HAS_PORT3_R__) || \
defined(__DOXYGEN__)
/** @brief Port 3 setup data.*/
msp430_dio_setup_t P3Data;
#endif
#if defined(__MSP430_HAS_PORT4__) || \
defined(__MSP430_HAS_PORT4_R__) || \
defined(__DOXYGEN__)
/** @brief Port 4 setup data.*/
msp430_dio_setup_t P4Data;
#endif
#if defined(__MSP430_HAS_PORT5__) || \
defined(__MSP430_HAS_PORT5_R__) || \
defined(__DOXYGEN__)
/** @brief Port 5 setup data.*/
msp430_dio_setup_t P5Data;
#endif
#if defined(__MSP430_HAS_PORT6__) || \
defined(__MSP430_HAS_PORT6_R__) || \
defined(__DOXYGEN__)
/** @brief Port 6 setup data.*/
msp430_dio_setup_t P6Data;
#endif
} MSP430DIOConfig;
/**
* @brief Width, in bits, of an I/O port.
*/
#define PAL_IOPORTS_WIDTH 8
/**
* @brief Whole port mask.
* @brief This macro specifies all the valid bits into a port.
*/
#define PAL_WHOLE_PORT ((ioportmask_t)0xFF)
/**
* @brief Digital I/O port sized unsigned type.
*/
typedef uint8_t ioportmask_t;
/**
* @brief Port Identifier.
* @details This type can be a scalar or some kind of pointer, do not make
* any assumption about it, use the provided macros when populating
* variables of this type.
*/
typedef union __ioport * ioportid_t;
/*===========================================================================*/
/* I/O Ports Identifiers. */
/*===========================================================================*/
/**
* @brief I/O port A identifier.
* @details This port identifier is mapped on the MSP430 port 1 (P1).
*/
#if defined(__MSP430_HAS_PORT1__) || \
defined(__MSP430_HAS_PORT1_R__) || \
defined(__DOXYGEN__)
#define IOPORT1 ((ioportid_t)0x0020)
#endif
/**
* @brief I/O port B identifier.
* @details This port identifier is mapped on the MSP430 port 2 (P2).
*/
#if defined(__MSP430_HAS_PORT2__) || \
defined(__MSP430_HAS_PORT2_R__) || \
defined(__DOXYGEN__)
#define IOPORT2 ((ioportid_t)0x0028)
#endif
/**
* @brief I/O port C identifier.
* @details This port identifier is mapped on the MSP430 port 3 (P3).
*/
#if defined(__MSP430_HAS_PORT3__) || \
defined(__MSP430_HAS_PORT3_R__) || \
defined(__DOXYGEN__)
#define IOPORT3 ((ioportid_t)0x0018)
#endif
/**
* @brief I/O port D identifier.
* @details This port identifier is mapped on the MSP430 port 4 (P4).
*/
#if defined(__MSP430_HAS_PORT4__) || \
defined(__MSP430_HAS_PORT4_R__) || \
defined(__DOXYGEN__)
#define IOPORT4 ((ioportid_t)0x001c)
#endif
/**
* @brief I/O port E identifier.
* @details This port identifier is mapped on the MSP430 port 5 (P5).
*/
#if defined(__MSP430_HAS_PORT5__) || \
defined(__MSP430_HAS_PORT5_R__) || \
defined(__DOXYGEN__)
#define IOPORT5 ((ioportid_t)0x0030)
#endif
/**
* @brief I/O port F identifier.
* @details This port identifier is mapped on the MSP430 port 6 (P6).
*/
#if defined(__MSP430_HAS_PORT6__) || \
defined(__MSP430_HAS_PORT6_R__) || \
defined(__DOXYGEN__)
#define IOPORT6 ((ioportid_t)0x0034)
#endif
/*===========================================================================*/
/* Implementation, some of the following macros could be implemented as */
/* functions, if so please put them in a file named pal_lld.c. */
/*===========================================================================*/
/**
* @brief Low level PAL subsystem initialization.
* @details In MSP430 programs all the ports as input.
*
* @param[in] config the MSP430 ports configuration
*/
#define pal_lld_init(config) _pal_lld_init(config)
/**
* @brief Reads the physical I/O port states.
* @details This function is implemented by reading the PxIN register, the
* implementation has no side effects.
*
* @param[in] port the port identifier
* @return The port bits.
*
* @note This function is not meant to be invoked directly by the application
* code.
*/
#define pal_lld_readport(port) ((port)->iop_common.in.reg_p)
/**
* @brief Reads the output latch.
* @details This function is implemented by reading the PxOUT register, the
* implementation has no side effects.
*
* @param[in] port the port identifier
* @return The latched logical states.
*
* @note This function is not meant to be invoked directly by the application
* code.
*/
#define pal_lld_readlatch(port) ((port)->iop_common.out.reg_p)
/**
* @brief Writes a bits mask on a I/O port.
* @details This function is implemented by writing the PxOUT register, the
* implementation has no side effects.
*
* @param[in] port the port identifier
* @param[in] bits the bits to be written on the specified port
*
* @note This function is not meant to be invoked directly by the application
* code.
*/
#define pal_lld_writeport(port, bits) { \
(port)->iop_common.out.reg_p = (bits); \
}
/**
* @brief Pads group mode setup.
* @details This function programs a pads group belonging to the same port
* with the specified mode.
*
* @param[in] port the port identifier
* @param[in] mask the group mask
* @param[in] mode the mode
*
* @note This function is not meant to be invoked directly by the application
* code.
* @note @p PAL_MODE_UNCONNECTED is implemented as output as recommended by
* the MSP430x1xx Family User's Guide.
* @note This function does not alter the @p PxSEL registers. Alternate
* functions setup must be handled by device-specific code.
*/
#define pal_lld_setgroupmode(port, mask, mode) \
_pal_lld_setgroupmode(port, mask, mode)
extern const MSP430DIOConfig pal_default_config;
#ifdef __cplusplus
extern "C" {
#endif
void _pal_lld_init(const MSP430DIOConfig *config);
void _pal_lld_setgroupmode(ioportid_t port,
ioportmask_t mask,
uint_fast8_t mode);
#ifdef __cplusplus
}
#endif
#endif /* _PAL_LLD_H_ */
/** @} */