/** ****************************************************************************** * @file stm32l152xdx.h * @author MCD Application Team * @version V2.1.1 * @date 31-March-2015 * @brief CMSIS Cortex-M3 Device Peripheral Access Layer Header File. * This file contains all the peripheral register's definitions, bits * definitions and memory mapping for STM32L1xx devices. * * This file contains: * - Data structures and the address mapping for all peripherals * - Peripheral's registers declarations and bits definition * - Macros to access peripheral’s registers hardware * ****************************************************************************** * @attention * *

© COPYRIGHT(c) 2015 STMicroelectronics

* * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /** @addtogroup CMSIS * @{ */ /** @addtogroup stm32l152xdx * @{ */ #ifndef __STM32L152xDX_H #define __STM32L152xDX_H #ifdef __cplusplus extern "C" { #endif /** @addtogroup Configuration_section_for_CMSIS * @{ */ /** * @brief Configuration of the Cortex-M3 Processor and Core Peripherals */ #define __CM3_REV 0x200 /*!< Cortex-M3 Revision r2p0 */ #define __MPU_PRESENT 1 /*!< STM32L1xx provides MPU */ #define __NVIC_PRIO_BITS 4 /*!< STM32L1xx uses 4 Bits for the Priority Levels */ #define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ /** * @} */ /** @addtogroup Peripheral_interrupt_number_definition * @{ */ /** * @brief STM32L1xx Interrupt Number Definition, according to the selected device * in @ref Library_configuration_section */ /*!< Interrupt Number Definition */ typedef enum { /****** Cortex-M3 Processor Exceptions Numbers ******************************************************/ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */ BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */ UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */ SVC_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */ DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */ PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */ SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */ /****** STM32L specific Interrupt Numbers ***********************************************************/ WWDG_IRQn = 0, /*!< Window WatchDog Interrupt */ PVD_IRQn = 1, /*!< PVD through EXTI Line detection Interrupt */ TAMPER_STAMP_IRQn = 2, /*!< Tamper and TimeStamp interrupts through the EXTI line */ RTC_WKUP_IRQn = 3, /*!< RTC Wakeup Timer through EXTI Line Interrupt */ FLASH_IRQn = 4, /*!< FLASH global Interrupt */ RCC_IRQn = 5, /*!< RCC global Interrupt */ EXTI0_IRQn = 6, /*!< EXTI Line0 Interrupt */ EXTI1_IRQn = 7, /*!< EXTI Line1 Interrupt */ EXTI2_IRQn = 8, /*!< EXTI Line2 Interrupt */ EXTI3_IRQn = 9, /*!< EXTI Line3 Interrupt */ EXTI4_IRQn = 10, /*!< EXTI Line4 Interrupt */ DMA1_Channel1_IRQn = 11, /*!< DMA1 Channel 1 global Interrupt */ DMA1_Channel2_IRQn = 12, /*!< DMA1 Channel 2 global Interrupt */ DMA1_Channel3_IRQn = 13, /*!< DMA1 Channel 3 global Interrupt */ DMA1_Channel4_IRQn = 14, /*!< DMA1 Channel 4 global Interrupt */ DMA1_Channel5_IRQn = 15, /*!< DMA1 Channel 5 global Interrupt */ DMA1_Channel6_IRQn = 16, /*!< DMA1 Channel 6 global Interrupt */ DMA1_Channel7_IRQn = 17, /*!< DMA1 Channel 7 global Interrupt */ ADC1_IRQn = 18, /*!< ADC1 global Interrupt */ USB_HP_IRQn = 19, /*!< USB High Priority Interrupt */ USB_LP_IRQn = 20, /*!< USB Low Priority Interrupt */ DAC_IRQn = 21, /*!< DAC Interrupt */ COMP_IRQn = 22, /*!< Comparator through EXTI Line Interrupt */ EXTI9_5_IRQn = 23, /*!< External Line[9:5] Interrupts */ LCD_IRQn = 24, /*!< LCD Interrupt */ TIM9_IRQn = 25, /*!< TIM9 global Interrupt */ TIM10_IRQn = 26, /*!< TIM10 global Interrupt */ TIM11_IRQn = 27, /*!< TIM11 global Interrupt */ TIM2_IRQn = 28, /*!< TIM2 global Interrupt */ TIM3_IRQn = 29, /*!< TIM3 global Interrupt */ TIM4_IRQn = 30, /*!< TIM4 global Interrupt */ I2C1_EV_IRQn = 31, /*!< I2C1 Event Interrupt */ I2C1_ER_IRQn = 32, /*!< I2C1 Error Interrupt */ I2C2_EV_IRQn = 33, /*!< I2C2 Event Interrupt */ I2C2_ER_IRQn = 34, /*!< I2C2 Error Interrupt */ SPI1_IRQn = 35, /*!< SPI1 global Interrupt */ SPI2_IRQn = 36, /*!< SPI2 global Interrupt */ USART1_IRQn = 37, /*!< USART1 global Interrupt */ USART2_IRQn = 38, /*!< USART2 global Interrupt */ USART3_IRQn = 39, /*!< USART3 global Interrupt */ EXTI15_10_IRQn = 40, /*!< External Line[15:10] Interrupts */ RTC_Alarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */ USB_FS_WKUP_IRQn = 42, /*!< USB FS WakeUp from suspend through EXTI Line Interrupt */ TIM6_IRQn = 43, /*!< TIM6 global Interrupt */ TIM7_IRQn = 44, /*!< TIM7 global Interrupt */ TIM5_IRQn = 46, /*!< TIM5 global Interrupt */ SPI3_IRQn = 47, /*!< SPI3 global Interrupt */ UART4_IRQn = 48, /*!< UART4 global Interrupt */ UART5_IRQn = 49, /*!< UART5 global Interrupt */ DMA2_Channel1_IRQn = 50, /*!< DMA2 Channel 1 global Interrupt */ DMA2_Channel2_IRQn = 51, /*!< DMA2 Channel 2 global Interrupt */ DMA2_Channel3_IRQn = 52, /*!< DMA2 Channel 3 global Interrupt */ DMA2_Channel4_IRQn = 53, /*!< DMA2 Channel 4 global Interrupt */ DMA2_Channel5_IRQn = 54, /*!< DMA2 Channel 5 global Interrupt */ COMP_ACQ_IRQn = 56 /*!< Comparator Channel Acquisition global Interrupt */ } IRQn_Type; /** * @} */ #include "core_cm3.h" #include "system_stm32l1xx.h" #include /** @addtogroup Peripheral_registers_structures * @{ */ /** * @brief Analog to Digital Converter */ typedef struct { __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */ __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */ __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */ __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */ __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */ __IO uint32_t SMPR3; /*!< ADC sample time register 3, Address offset: 0x14 */ __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x18 */ __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x1C */ __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x20 */ __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x24 */ __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x28 */ __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x2C */ __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x30 */ __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x34 */ __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x38 */ __IO uint32_t SQR4; /*!< ADC regular sequence register 4, Address offset: 0x3C */ __IO uint32_t SQR5; /*!< ADC regular sequence register 5, Address offset: 0x40 */ __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x44 */ __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x48 */ __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x4C */ __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x50 */ __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x54 */ __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x58 */ __IO uint32_t SMPR0; /*!< ADC sample time register 0, Address offset: 0x5C */ } ADC_TypeDef; typedef struct { __IO uint32_t CSR; /*!< ADC common status register, Address offset: ADC1 base address + 0x300 */ __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */ } ADC_Common_TypeDef; /** * @brief Comparator */ typedef struct { __IO uint32_t CSR; /*!< COMP comparator control and status register, Address offset: 0x00 */ } COMP_TypeDef; /** * @brief CRC calculation unit */ typedef struct { __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */ __IO uint32_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */ } CRC_TypeDef; /** * @brief Digital to Analog Converter */ typedef struct { __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */ __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */ __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */ __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */ __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */ __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */ __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */ __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */ } DAC_TypeDef; /** * @brief Debug MCU */ typedef struct { __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */ }DBGMCU_TypeDef; /** * @brief DMA Controller */ typedef struct { __IO uint32_t CCR; /*!< DMA channel x configuration register */ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */ __IO uint32_t CMAR; /*!< DMA channel x memory address register */ } DMA_Channel_TypeDef; typedef struct { __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */ } DMA_TypeDef; /** * @brief External Interrupt/Event Controller */ typedef struct { __IO uint32_t IMR; /*! 0x7C */ __IO uint32_t WRP1213; /*!< write protection register 12 13, Address offset: 0x80 */ __IO uint32_t WRP1415; /*!< write protection register 14 15, Address offset: 0x84 */ } OB_TypeDef; /** * @brief Operational Amplifier (OPAMP) */ typedef struct { __IO uint32_t CSR; /*!< OPAMP control/status register, Address offset: 0x00 */ __IO uint32_t OTR; /*!< OPAMP offset trimming register for normal mode, Address offset: 0x04 */ __IO uint32_t LPOTR; /*!< OPAMP offset trimming register for low power mode, Address offset: 0x08 */ } OPAMP_TypeDef; /** * @brief General Purpose IO */ typedef struct { __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */ __IO uint32_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */ __IO uint32_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */ __IO uint32_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */ __IO uint32_t BSRR; /*!< GPIO port bit set/reset registerBSRR, Address offset: 0x18 */ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */ __IO uint32_t AFR[2]; /*!< GPIO alternate function register, Address offset: 0x20-0x24 */ __IO uint32_t BRR; /*!< GPIO bit reset register, Address offset: 0x28 */ } GPIO_TypeDef; /** * @brief SysTem Configuration */ typedef struct { __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */ __IO uint32_t PMC; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */ } SYSCFG_TypeDef; /** * @brief Inter-integrated Circuit Interface */ typedef struct { __IO uint32_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */ __IO uint32_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */ __IO uint32_t OAR1; /*!< I2C Own address register 1, Address offset: 0x08 */ __IO uint32_t OAR2; /*!< I2C Own address register 2, Address offset: 0x0C */ __IO uint32_t DR; /*!< I2C Data register, Address offset: 0x10 */ __IO uint32_t SR1; /*!< I2C Status register 1, Address offset: 0x14 */ __IO uint32_t SR2; /*!< I2C Status register 2, Address offset: 0x18 */ __IO uint32_t CCR; /*!< I2C Clock control register, Address offset: 0x1C */ __IO uint32_t TRISE; /*!< I2C TRISE register, Address offset: 0x20 */ } I2C_TypeDef; /** * @brief Independent WATCHDOG */ typedef struct { __IO uint32_t KR; /*!< Key register, Address offset: 0x00 */ __IO uint32_t PR; /*!< Prescaler register, Address offset: 0x04 */ __IO uint32_t RLR; /*!< Reload register, Address offset: 0x08 */ __IO uint32_t SR; /*!< Status register, Address offset: 0x0C */ } IWDG_TypeDef; /** * @brief LCD */ typedef struct { __IO uint32_t CR; /*!< LCD control register, Address offset: 0x00 */ __IO uint32_t FCR; /*!< LCD frame control register, Address offset: 0x04 */ __IO uint32_t SR; /*!< LCD status register, Address offset: 0x08 */ __IO uint32_t CLR; /*!< LCD clear register, Address offset: 0x0C */ uint32_t RESERVED; /*!< Reserved, Address offset: 0x10 */ __IO uint32_t RAM[16]; /*!< LCD display memory, Address offset: 0x14-0x50 */ } LCD_TypeDef; /** * @brief Power Control */ typedef struct { __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */ } PWR_TypeDef; /** * @brief Reset and Clock Control */ typedef struct { __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */ __IO uint32_t ICSCR; /*!< RCC Internal clock sources calibration register, Address offset: 0x04 */ __IO uint32_t CFGR; /*!< RCC Clock configuration register, Address offset: 0x08 */ __IO uint32_t CIR; /*!< RCC Clock interrupt register, Address offset: 0x0C */ __IO uint32_t AHBRSTR; /*!< RCC AHB peripheral reset register, Address offset: 0x10 */ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x14 */ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x18 */ __IO uint32_t AHBENR; /*!< RCC AHB peripheral clock enable register, Address offset: 0x1C */ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x20 */ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x24 */ __IO uint32_t AHBLPENR; /*!< RCC AHB peripheral clock enable in low power mode register, Address offset: 0x28 */ __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x2C */ __IO uint32_t APB1LPENR; /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x30 */ __IO uint32_t CSR; /*!< RCC Control/status register, Address offset: 0x34 */ } RCC_TypeDef; /** * @brief Routing Interface */ typedef struct { __IO uint32_t ICR; /*!< RI input capture register, Address offset: 0x00 */ __IO uint32_t ASCR1; /*!< RI analog switches control register, Address offset: 0x04 */ __IO uint32_t ASCR2; /*!< RI analog switch control register 2, Address offset: 0x08 */ __IO uint32_t HYSCR1; /*!< RI hysteresis control register, Address offset: 0x0C */ __IO uint32_t HYSCR2; /*!< RI Hysteresis control register, Address offset: 0x10 */ __IO uint32_t HYSCR3; /*!< RI Hysteresis control register, Address offset: 0x14 */ __IO uint32_t HYSCR4; /*!< RI Hysteresis control register, Address offset: 0x18 */ __IO uint32_t ASMR1; /*!< RI Analog switch mode register 1, Address offset: 0x1C */ __IO uint32_t CMR1; /*!< RI Channel mask register 1, Address offset: 0x20 */ __IO uint32_t CICR1; /*!< RI Channel Iden for capture register 1, Address offset: 0x24 */ __IO uint32_t ASMR2; /*!< RI Analog switch mode register 2, Address offset: 0x28 */ __IO uint32_t CMR2; /*!< RI Channel mask register 2, Address offset: 0x2C */ __IO uint32_t CICR2; /*!< RI Channel Iden for capture register 2, Address offset: 0x30 */ __IO uint32_t ASMR3; /*!< RI Analog switch mode register 3, Address offset: 0x34 */ __IO uint32_t CMR3; /*!< RI Channel mask register 3, Address offset: 0x38 */ __IO uint32_t CICR3; /*!< RI Channel Iden for capture register 3, Address offset: 0x3C */ __IO uint32_t ASMR4; /*!< RI Analog switch mode register 4, Address offset: 0x40 */ __IO uint32_t CMR4; /*!< RI Channel mask register 4, Address offset: 0x44 */ __IO uint32_t CICR4; /*!< RI Channel Iden for capture register 4, Address offset: 0x48 */ __IO uint32_t ASMR5; /*!< RI Analog switch mode register 5, Address offset: 0x4C */ __IO uint32_t CMR5; /*!< RI Channel mask register 5, Address offset: 0x50 */ __IO uint32_t CICR5; /*!< RI Channel Iden for capture register 5, Address offset: 0x54 */ } RI_TypeDef; /** * @brief Real-Time Clock */ typedef struct { __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */ __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */ __IO uint32_t CALIBR; /*!< RTC calibration register, Address offset: 0x18 */ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */ __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */ __IO uint32_t CALR; /*!< RRTC calibration register, Address offset: 0x3C */ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */ __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */ __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x48 */ uint32_t RESERVED7; /*!< Reserved, 0x4C */ __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */ __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */ __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */ __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */ __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */ __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */ __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */ __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */ __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */ __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */ __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */ __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */ __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */ __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */ __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */ __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */ __IO uint32_t BKP20R; /*!< RTC backup register 20, Address offset: 0xA0 */ __IO uint32_t BKP21R; /*!< RTC backup register 21, Address offset: 0xA4 */ __IO uint32_t BKP22R; /*!< RTC backup register 22, Address offset: 0xA8 */ __IO uint32_t BKP23R; /*!< RTC backup register 23, Address offset: 0xAC */ __IO uint32_t BKP24R; /*!< RTC backup register 24, Address offset: 0xB0 */ __IO uint32_t BKP25R; /*!< RTC backup register 25, Address offset: 0xB4 */ __IO uint32_t BKP26R; /*!< RTC backup register 26, Address offset: 0xB8 */ __IO uint32_t BKP27R; /*!< RTC backup register 27, Address offset: 0xBC */ __IO uint32_t BKP28R; /*!< RTC backup register 28, Address offset: 0xC0 */ __IO uint32_t BKP29R; /*!< RTC backup register 29, Address offset: 0xC4 */ __IO uint32_t BKP30R; /*!< RTC backup register 30, Address offset: 0xC8 */ __IO uint32_t BKP31R; /*!< RTC backup register 31, Address offset: 0xCC */ } RTC_TypeDef; /** * @brief Serial Peripheral Interface */ typedef struct { __IO uint32_t CR1; /*!< SPI Control register 1 (not used in I2S mode), Address offset: 0x00 */ __IO uint32_t CR2; /*!< SPI Control register 2, Address offset: 0x04 */ __IO uint32_t SR; /*!< SPI Status register, Address offset: 0x08 */ __IO uint32_t DR; /*!< SPI data register, Address offset: 0x0C */ __IO uint32_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */ __IO uint32_t RXCRCR; /*!< SPI Rx CRC register (not used in I2S mode), Address offset: 0x14 */ __IO uint32_t TXCRCR; /*!< SPI Tx CRC register (not used in I2S mode), Address offset: 0x18 */ __IO uint32_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */ __IO uint32_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */ } SPI_TypeDef; /** * @brief TIM */ typedef struct { __IO uint32_t CR1; /*!< TIM control register 1, Address offset: 0x00 */ __IO uint32_t CR2; /*!< TIM control register 2, Address offset: 0x04 */ __IO uint32_t SMCR; /*!< TIM slave Mode Control register, Address offset: 0x08 */ __IO uint32_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */ __IO uint32_t SR; /*!< TIM status register, Address offset: 0x10 */ __IO uint32_t EGR; /*!< TIM event generation register, Address offset: 0x14 */ __IO uint32_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */ __IO uint32_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */ __IO uint32_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */ __IO uint32_t PSC; /*!< TIM prescaler register, Address offset: 0x28 */ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */ uint32_t RESERVED12; /*!< Reserved, 0x30 */ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */ uint32_t RESERVED17; /*!< Reserved, 0x44 */ __IO uint32_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */ __IO uint32_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */ __IO uint32_t OR; /*!< TIM option register, Address offset: 0x50 */ } TIM_TypeDef; /** * @brief Universal Synchronous Asynchronous Receiver Transmitter */ typedef struct { __IO uint32_t SR; /*!< USART Status register, Address offset: 0x00 */ __IO uint32_t DR; /*!< USART Data register, Address offset: 0x04 */ __IO uint32_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */ __IO uint32_t CR1; /*!< USART Control register 1, Address offset: 0x0C */ __IO uint32_t CR2; /*!< USART Control register 2, Address offset: 0x10 */ __IO uint32_t CR3; /*!< USART Control register 3, Address offset: 0x14 */ __IO uint32_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */ } USART_TypeDef; /** * @brief Universal Serial Bus Full Speed Device */ typedef struct { __IO uint16_t EP0R; /*!< USB Endpoint 0 register, Address offset: 0x00 */ __IO uint16_t RESERVED0; /*!< Reserved */ __IO uint16_t EP1R; /*!< USB Endpoint 1 register, Address offset: 0x04 */ __IO uint16_t RESERVED1; /*!< Reserved */ __IO uint16_t EP2R; /*!< USB Endpoint 2 register, Address offset: 0x08 */ __IO uint16_t RESERVED2; /*!< Reserved */ __IO uint16_t EP3R; /*!< USB Endpoint 3 register, Address offset: 0x0C */ __IO uint16_t RESERVED3; /*!< Reserved */ __IO uint16_t EP4R; /*!< USB Endpoint 4 register, Address offset: 0x10 */ __IO uint16_t RESERVED4; /*!< Reserved */ __IO uint16_t EP5R; /*!< USB Endpoint 5 register, Address offset: 0x14 */ __IO uint16_t RESERVED5; /*!< Reserved */ __IO uint16_t EP6R; /*!< USB Endpoint 6 register, Address offset: 0x18 */ __IO uint16_t RESERVED6; /*!< Reserved */ __IO uint16_t EP7R; /*!< USB Endpoint 7 register, Address offset: 0x1C */ __IO uint16_t RESERVED7[17]; /*!< Reserved */ __IO uint16_t CNTR; /*!< Control register, Address offset: 0x40 */ __IO uint16_t RESERVED8; /*!< Reserved */ __IO uint16_t ISTR; /*!< Interrupt status register, Address offset: 0x44 */ __IO uint16_t RESERVED9; /*!< Reserved */ __IO uint16_t FNR; /*!< Frame number register, Address offset: 0x48 */ __IO uint16_t RESERVEDA; /*!< Reserved */ __IO uint16_t DADDR; /*!< Device address register, Address offset: 0x4C */ __IO uint16_t RESERVEDB; /*!< Reserved */ __IO uint16_t BTABLE; /*!< Buffer Table address register, Address offset: 0x50 */ __IO uint16_t RESERVEDC; /*!< Reserved */ } USB_TypeDef; /** * @brief Window WATCHDOG */ typedef struct { __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */ } WWDG_TypeDef; /** * @brief Universal Serial Bus Full Speed Device */ /** * @} */ /** @addtogroup Peripheral_memory_map * @{ */ #define FLASH_BASE ((uint32_t)0x08000000) /*!< FLASH base address in the alias region */ #define FLASH_EEPROM_BASE ((uint32_t)(FLASH_BASE + 0x80000)) /*!< FLASH EEPROM base address in the alias region */ #define SRAM_BASE ((uint32_t)0x20000000) /*!< SRAM base address in the alias region */ #define PERIPH_BASE ((uint32_t)0x40000000) /*!< Peripheral base address in the alias region */ #define SRAM_BB_BASE ((uint32_t)0x22000000) /*!< SRAM base address in the bit-band region */ #define PERIPH_BB_BASE ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region */ #define FLASH_BANK2_BASE ((uint32_t)0x08040000) /*!< FLASH BANK2 base address in the alias region */ #define FLASH_BANK1_END ((uint32_t)0x0802FFFF) /*!< Program end FLASH BANK1 address */ #define FLASH_BANK2_END ((uint32_t)0x0806FFFF) /*!< Program end FLASH BANK2 address */ #define FLASH_EEPROM_END ((uint32_t)0x08083FFF) /*!< FLASH EEPROM end address (16KB) */ /*!< Peripheral memory map */ #define APB1PERIPH_BASE PERIPH_BASE #define APB2PERIPH_BASE (PERIPH_BASE + 0x00010000) #define AHBPERIPH_BASE (PERIPH_BASE + 0x00020000) /*!< APB1 peripherals */ #define TIM2_BASE (APB1PERIPH_BASE + 0x00000000) #define TIM3_BASE (APB1PERIPH_BASE + 0x00000400) #define TIM4_BASE (APB1PERIPH_BASE + 0x00000800) #define TIM5_BASE (APB1PERIPH_BASE + 0x00000C00) #define TIM6_BASE (APB1PERIPH_BASE + 0x00001000) #define TIM7_BASE (APB1PERIPH_BASE + 0x00001400) #define LCD_BASE (APB1PERIPH_BASE + 0x00002400) #define RTC_BASE (APB1PERIPH_BASE + 0x00002800) #define WWDG_BASE (APB1PERIPH_BASE + 0x00002C00) #define IWDG_BASE (APB1PERIPH_BASE + 0x00003000) #define SPI2_BASE (APB1PERIPH_BASE + 0x00003800) #define SPI3_BASE (APB1PERIPH_BASE + 0x00003C00) #define USART2_BASE (APB1PERIPH_BASE + 0x00004400) #define USART3_BASE (APB1PERIPH_BASE + 0x00004800) #define UART4_BASE (APB1PERIPH_BASE + 0x00004C00) #define UART5_BASE (APB1PERIPH_BASE + 0x00005000) #define I2C1_BASE (APB1PERIPH_BASE + 0x00005400) #define I2C2_BASE (APB1PERIPH_BASE + 0x00005800) /* USB device FS */ #define USB_BASE (APB1PERIPH_BASE + 0x00005C00) /*!< USB_IP Peripheral Registers base address */ #define USB_PMAADDR (APB1PERIPH_BASE + 0x00006000) /*!< USB_IP Packet Memory Area base address */ /* USB device FS SRAM */ #define PWR_BASE (APB1PERIPH_BASE + 0x00007000) #define DAC_BASE (APB1PERIPH_BASE + 0x00007400) #define COMP_BASE (APB1PERIPH_BASE + 0x00007C00) #define RI_BASE (APB1PERIPH_BASE + 0x00007C04) #define OPAMP_BASE (APB1PERIPH_BASE + 0x00007C5C) /*!< APB2 peripherals */ #define SYSCFG_BASE (APB2PERIPH_BASE + 0x00000000) #define EXTI_BASE (APB2PERIPH_BASE + 0x00000400) #define TIM9_BASE (APB2PERIPH_BASE + 0x00000800) #define TIM10_BASE (APB2PERIPH_BASE + 0x00000C00) #define TIM11_BASE (APB2PERIPH_BASE + 0x00001000) #define ADC1_BASE (APB2PERIPH_BASE + 0x00002400) #define ADC_BASE (APB2PERIPH_BASE + 0x00002700) #define SPI1_BASE (APB2PERIPH_BASE + 0x00003000) #define USART1_BASE (APB2PERIPH_BASE + 0x00003800) /*!< AHB peripherals */ #define GPIOA_BASE (AHBPERIPH_BASE + 0x00000000) #define GPIOB_BASE (AHBPERIPH_BASE + 0x00000400) #define GPIOC_BASE (AHBPERIPH_BASE + 0x00000800) #define GPIOD_BASE (AHBPERIPH_BASE + 0x00000C00) #define GPIOE_BASE (AHBPERIPH_BASE + 0x00001000) #define GPIOH_BASE (AHBPERIPH_BASE + 0x00001400) #define GPIOF_BASE (AHBPERIPH_BASE + 0x00001800) #define GPIOG_BASE (AHBPERIPH_BASE + 0x00001C00) #define CRC_BASE (AHBPERIPH_BASE + 0x00003000) #define RCC_BASE (AHBPERIPH_BASE + 0x00003800) #define FLASH_R_BASE (AHBPERIPH_BASE + 0x00003C00) /*!< FLASH registers base address */ #define OB_BASE ((uint32_t)0x1FF80000) /*!< FLASH Option Bytes base address */ #define DMA1_BASE (AHBPERIPH_BASE + 0x00006000) #define DMA1_Channel1_BASE (DMA1_BASE + 0x00000008) #define DMA1_Channel2_BASE (DMA1_BASE + 0x0000001C) #define DMA1_Channel3_BASE (DMA1_BASE + 0x00000030) #define DMA1_Channel4_BASE (DMA1_BASE + 0x00000044) #define DMA1_Channel5_BASE (DMA1_BASE + 0x00000058) #define DMA1_Channel6_BASE (DMA1_BASE + 0x0000006C) #define DMA1_Channel7_BASE (DMA1_BASE + 0x00000080) #define DMA2_BASE (AHBPERIPH_BASE + 0x00006400) #define DMA2_Channel1_BASE (DMA2_BASE + 0x00000008) #define DMA2_Channel2_BASE (DMA2_BASE + 0x0000001C) #define DMA2_Channel3_BASE (DMA2_BASE + 0x00000030) #define DMA2_Channel4_BASE (DMA2_BASE + 0x00000044) #define DMA2_Channel5_BASE (DMA2_BASE + 0x00000058) #define DBGMCU_BASE ((uint32_t)0xE0042000) /*!< Debug MCU registers base address */ /** * @} */ /** @addtogroup Peripheral_declaration * @{ */ #define TIM2 ((TIM_TypeDef *) TIM2_BASE) #define TIM3 ((TIM_TypeDef *) TIM3_BASE) #define TIM4 ((TIM_TypeDef *) TIM4_BASE) #define TIM5 ((TIM_TypeDef *) TIM5_BASE) #define TIM6 ((TIM_TypeDef *) TIM6_BASE) #define TIM7 ((TIM_TypeDef *) TIM7_BASE) #define LCD ((LCD_TypeDef *) LCD_BASE) #define RTC ((RTC_TypeDef *) RTC_BASE) #define WWDG ((WWDG_TypeDef *) WWDG_BASE) #define IWDG ((IWDG_TypeDef *) IWDG_BASE) #define SPI2 ((SPI_TypeDef *) SPI2_BASE) #define SPI3 ((SPI_TypeDef *) SPI3_BASE) #define USART2 ((USART_TypeDef *) USART2_BASE) #define USART3 ((USART_TypeDef *) USART3_BASE) #define UART4 ((USART_TypeDef *) UART4_BASE) #define UART5 ((USART_TypeDef *) UART5_BASE) #define I2C1 ((I2C_TypeDef *) I2C1_BASE) #define I2C2 ((I2C_TypeDef *) I2C2_BASE) /* USB device FS */ #define USB ((USB_TypeDef *) USB_BASE) /* USB device FS SRAM */ #define PWR ((PWR_TypeDef *) PWR_BASE) #define DAC ((DAC_TypeDef *) DAC_BASE) #define COMP ((COMP_TypeDef *) COMP_BASE) #define COMP1 ((COMP_TypeDef *) COMP_BASE) #define COMP2 ((COMP_TypeDef *) (COMP_BASE + 0x00000001)) #define RI ((RI_TypeDef *) RI_BASE) #define OPAMP ((OPAMP_TypeDef *) OPAMP_BASE) #define OPAMP1 ((OPAMP_TypeDef *) OPAMP_BASE) #define OPAMP2 ((OPAMP_TypeDef *) (OPAMP_BASE + 0x00000001)) #define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE) #define EXTI ((EXTI_TypeDef *) EXTI_BASE) #define TIM9 ((TIM_TypeDef *) TIM9_BASE) #define TIM10 ((TIM_TypeDef *) TIM10_BASE) #define TIM11 ((TIM_TypeDef *) TIM11_BASE) #define ADC1 ((ADC_TypeDef *) ADC1_BASE) #define ADC ((ADC_Common_TypeDef *) ADC_BASE) #define SPI1 ((SPI_TypeDef *) SPI1_BASE) #define USART1 ((USART_TypeDef *) USART1_BASE) #define GPIOA ((GPIO_TypeDef *) GPIOA_BASE) #define GPIOB ((GPIO_TypeDef *) GPIOB_BASE) #define GPIOC ((GPIO_TypeDef *) GPIOC_BASE) #define GPIOD ((GPIO_TypeDef *) GPIOD_BASE) #define GPIOE ((GPIO_TypeDef *) GPIOE_BASE) #define GPIOH ((GPIO_TypeDef *) GPIOH_BASE) #define GPIOF ((GPIO_TypeDef *) GPIOF_BASE) #define GPIOG ((GPIO_TypeDef *) GPIOG_BASE) #define CRC ((CRC_TypeDef *) CRC_BASE) #define RCC ((RCC_TypeDef *) RCC_BASE) #define FLASH ((FLASH_TypeDef *) FLASH_R_BASE) #define OB ((OB_TypeDef *) OB_BASE) #define DMA1 ((DMA_TypeDef *) DMA1_BASE) #define DMA1_Channel1 ((DMA_Channel_TypeDef *) DMA1_Channel1_BASE) #define DMA1_Channel2 ((DMA_Channel_TypeDef *) DMA1_Channel2_BASE) #define DMA1_Channel3 ((DMA_Channel_TypeDef *) DMA1_Channel3_BASE) #define DMA1_Channel4 ((DMA_Channel_TypeDef *) DMA1_Channel4_BASE) #define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE) #define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE) #define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE) #define DMA2 ((DMA_TypeDef *) DMA2_BASE) #define DMA2_Channel1 ((DMA_Channel_TypeDef *) DMA2_Channel1_BASE) #define DMA2_Channel2 ((DMA_Channel_TypeDef *) DMA2_Channel2_BASE) #define DMA2_Channel3 ((DMA_Channel_TypeDef *) DMA2_Channel3_BASE) #define DMA2_Channel4 ((DMA_Channel_TypeDef *) DMA2_Channel4_BASE) #define DMA2_Channel5 ((DMA_Channel_TypeDef *) DMA2_Channel5_BASE) #define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE) /** * @} */ /** @addtogroup Exported_constants * @{ */ /** @addtogroup Peripheral_Registers_Bits_Definition * @{ */ /******************************************************************************/ /* Peripheral Registers Bits Definition */ /******************************************************************************/ /******************************************************************************/ /* */ /* Analog to Digital Converter (ADC) */ /* */ /******************************************************************************/ /******************** Bit definition for ADC_SR register ********************/ #define ADC_SR_AWD ((uint32_t)0x00000001) /*!< Analog watchdog flag */ #define ADC_SR_EOC ((uint32_t)0x00000002) /*!< End of conversion */ #define ADC_SR_JEOC ((uint32_t)0x00000004) /*!< Injected channel end of conversion */ #define ADC_SR_JSTRT ((uint32_t)0x00000008) /*!< Injected channel Start flag */ #define ADC_SR_STRT ((uint32_t)0x00000010) /*!< Regular channel Start flag */ #define ADC_SR_OVR ((uint32_t)0x00000020) /*!< Overrun flag */ #define ADC_SR_ADONS ((uint32_t)0x00000040) /*!< ADC ON status */ #define ADC_SR_RCNR ((uint32_t)0x00000100) /*!< Regular channel not ready flag */ #define ADC_SR_JCNR ((uint32_t)0x00000200) /*!< Injected channel not ready flag */ /******************* Bit definition for ADC_CR1 register ********************/ #define ADC_CR1_AWDCH ((uint32_t)0x0000001F) /*!< AWDCH[4:0] bits (Analog watchdog channel select bits) */ #define ADC_CR1_AWDCH_0 ((uint32_t)0x00000001) /*!< Bit 0 */ #define ADC_CR1_AWDCH_1 ((uint32_t)0x00000002) /*!< Bit 1 */ #define ADC_CR1_AWDCH_2 ((uint32_t)0x00000004) /*!< Bit 2 */ #define ADC_CR1_AWDCH_3 ((uint32_t)0x00000008) /*!< Bit 3 */ #define ADC_CR1_AWDCH_4 ((uint32_t)0x00000010) /*!< Bit 4 */ #define ADC_CR1_EOCIE ((uint32_t)0x00000020) /*!< Interrupt enable for EOC */ #define ADC_CR1_AWDIE ((uint32_t)0x00000040) /*!< Analog Watchdog interrupt enable */ #define ADC_CR1_JEOCIE ((uint32_t)0x00000080) /*!< Interrupt enable for injected channels */ #define ADC_CR1_SCAN ((uint32_t)0x00000100) /*!< Scan mode */ #define ADC_CR1_AWDSGL ((uint32_t)0x00000200) /*!< Enable the watchdog on a single channel in scan mode */ #define ADC_CR1_JAUTO ((uint32_t)0x00000400) /*!< Automatic injected group conversion */ #define ADC_CR1_DISCEN ((uint32_t)0x00000800) /*!< Discontinuous mode on regular channels */ #define ADC_CR1_JDISCEN ((uint32_t)0x00001000) /*!< Discontinuous mode on injected channels */ #define ADC_CR1_DISCNUM ((uint32_t)0x0000E000) /*!< DISCNUM[2:0] bits (Discontinuous mode channel count) */ #define ADC_CR1_DISCNUM_0 ((uint32_t)0x00002000) /*!< Bit 0 */ #define ADC_CR1_DISCNUM_1 ((uint32_t)0x00004000) /*!< Bit 1 */ #define ADC_CR1_DISCNUM_2 ((uint32_t)0x00008000) /*!< Bit 2 */ #define ADC_CR1_PDD ((uint32_t)0x00010000) /*!< Power Down during Delay phase */ #define ADC_CR1_PDI ((uint32_t)0x00020000) /*!< Power Down during Idle phase */ #define ADC_CR1_JAWDEN ((uint32_t)0x00400000) /*!< Analog watchdog enable on injected channels */ #define ADC_CR1_AWDEN ((uint32_t)0x00800000) /*!< Analog watchdog enable on regular channels */ #define ADC_CR1_RES ((uint32_t)0x03000000) /*!< RES[1:0] bits (Resolution) */ #define ADC_CR1_RES_0 ((uint32_t)0x01000000) /*!< Bit 0 */ #define ADC_CR1_RES_1 ((uint32_t)0x02000000) /*!< Bit 1 */ #define ADC_CR1_OVRIE ((uint32_t)0x04000000) /*!< Overrun interrupt enable */ /******************* Bit definition for ADC_CR2 register ********************/ #define ADC_CR2_ADON ((uint32_t)0x00000001) /*!< A/D Converter ON / OFF */ #define ADC_CR2_CONT ((uint32_t)0x00000002) /*!< Continuous Conversion */ #define ADC_CR2_CFG ((uint32_t)0x00000004) /*!< ADC Configuration */ #define ADC_CR2_DELS ((uint32_t)0x00000070) /*!< DELS[2:0] bits (Delay selection) */ #define ADC_CR2_DELS_0 ((uint32_t)0x00000010) /*!< Bit 0 */ #define ADC_CR2_DELS_1 ((uint32_t)0x00000020) /*!< Bit 1 */ #define ADC_CR2_DELS_2 ((uint32_t)0x00000040) /*!< Bit 2 */ #define ADC_CR2_DMA ((uint32_t)0x00000100) /*!< Direct Memory access mode */ #define ADC_CR2_DDS ((uint32_t)0x00000200) /*!< DMA disable selection (Single ADC) */ #define ADC_CR2_EOCS ((uint32_t)0x00000400) /*!< End of conversion selection */ #define ADC_CR2_ALIGN ((uint32_t)0x00000800) /*!< Data Alignment */ #define ADC_CR2_JEXTSEL ((uint32_t)0x000F0000) /*!< JEXTSEL[3:0] bits (External event select for injected group) */ #define ADC_CR2_JEXTSEL_0 ((uint32_t)0x00010000) /*!< Bit 0 */ #define ADC_CR2_JEXTSEL_1 ((uint32_t)0x00020000) /*!< Bit 1 */ #define ADC_CR2_JEXTSEL_2 ((uint32_t)0x00040000) /*!< Bit 2 */ #define ADC_CR2_JEXTSEL_3 ((uint32_t)0x00080000) /*!< Bit 3 */ #define ADC_CR2_JEXTEN ((uint32_t)0x00300000) /*!< JEXTEN[1:0] bits (External Trigger Conversion mode for injected channels) */ #define ADC_CR2_JEXTEN_0 ((uint32_t)0x00100000) /*!< Bit 0 */ #define ADC_CR2_JEXTEN_1 ((uint32_t)0x00200000) /*!< Bit 1 */ #define ADC_CR2_JSWSTART ((uint32_t)0x00400000) /*!< Start Conversion of injected channels */ #define ADC_CR2_EXTSEL ((uint32_t)0x0F000000) /*!< EXTSEL[3:0] bits (External Event Select for regular group) */ #define ADC_CR2_EXTSEL_0 ((uint32_t)0x01000000) /*!< Bit 0 */ #define ADC_CR2_EXTSEL_1 ((uint32_t)0x02000000) /*!< Bit 1 */ #define ADC_CR2_EXTSEL_2 ((uint32_t)0x04000000) /*!< Bit 2 */ #define ADC_CR2_EXTSEL_3 ((uint32_t)0x08000000) /*!< Bit 3 */ #define ADC_CR2_EXTEN ((uint32_t)0x30000000) /*!< EXTEN[1:0] bits (External Trigger Conversion mode for regular channels) */ #define ADC_CR2_EXTEN_0 ((uint32_t)0x10000000) /*!< Bit 0 */ #define ADC_CR2_EXTEN_1 ((uint32_t)0x20000000) /*!< Bit 1 */ #define ADC_CR2_SWSTART ((uint32_t)0x40000000) /*!< Start Conversion of regular channels */ /****************** Bit definition for ADC_SMPR1 register *******************/ #define ADC_SMPR1_SMP20 ((uint32_t)0x00000007) /*!< SMP20[2:0] bits (Channel 20 Sample time selection) */ #define ADC_SMPR1_SMP20_0 ((uint32_t)0x00000001) /*!< Bit 0 */ #define ADC_SMPR1_SMP20_1 ((uint32_t)0x00000002) /*!< Bit 1 */ #define ADC_SMPR1_SMP20_2 ((uint32_t)0x00000004) /*!< Bit 2 */ #define ADC_SMPR1_SMP21 ((uint32_t)0x00000038) /*!< SMP21[2:0] bits (Channel 21 Sample time selection) */ #define ADC_SMPR1_SMP21_0 ((uint32_t)0x00000008) /*!< Bit 0 */ #define ADC_SMPR1_SMP21_1 ((uint32_t)0x00000010) /*!< Bit 1 */ #define ADC_SMPR1_SMP21_2 ((uint32_t)0x00000020) /*!< Bit 2 */ #define ADC_SMPR1_SMP22 ((uint32_t)0x000001C0) /*!< SMP22[2:0] bits (Channel 22 Sample time selection) */ #define ADC_SMPR1_SMP22_0 ((uint32_t)0x00000040) /*!< Bit 0 */ #define ADC_SMPR1_SMP22_1 ((uint32_t)0x00000080) /*!< Bit 1 */ #define ADC_SMPR1_SMP22_2 ((uint32_t)0x00000100) /*!< Bit 2 */ #define ADC_SMPR1_SMP23 ((uint32_t)0x00000E00) /*!< SMP23[2:0] bits (Channel 23 Sample time selection) */ #define ADC_SMPR1_SMP23_0 ((uint32_t)0x00000200) /*!< Bit 0 */ #define ADC_SMPR1_SMP23_1 ((uint32_t)0x00000400) /*!< Bit 1 */ #define ADC_SMPR1_SMP23_2 ((uint32_t)0x00000800) /*!< Bit 2 */ #define ADC_SMPR1_SMP24 ((uint32_t)0x00007000) /*!< SMP24[2:0] bits (Channel 24 Sample time selection) */ #define ADC_SMPR1_SMP24_0 ((uint32_t)0x00001000) /*!< Bit 0 */ #define ADC_SMPR1_SMP24_1 ((uint32_t)0x00002000) /*!< Bit 1 */ #define ADC_SMPR1_SMP24_2 ((uint32_t)0x00004000) /*!< Bit 2 */ #define ADC_SMPR1_SMP25 ((uint32_t)0x00038000) /*!< SMP25[2:0] bits (Channel 25 Sample time selection) */ #define ADC_SMPR1_SMP25_0 ((uint32_t)0x00008000) /*!< Bit 0 */ #define ADC_SMPR1_SMP25_1 ((uint32_t)0x00010000) /*!< Bit 1 */ #define ADC_SMPR1_SMP25_2 ((uint32_t)0x00020000) /*!< Bit 2 */ #define ADC_SMPR1_SMP26 ((uint32_t)0x001C0000) /*!< SMP26[2:0] bits (Channel 26 Sample time selection) */ #define ADC_SMPR1_SMP26_0 ((uint32_t)0x00040000) /*!< Bit 0 */ #define ADC_SMPR1_SMP26_1 ((uint32_t)0x00080000) /*!< Bit 1 */ #define ADC_SMPR1_SMP26_2 ((uint32_t)0x00100000) /*!< Bit 2 */ #define ADC_SMPR1_SMP27 ((uint32_t)0x00E00000) /*!< SMP27[2:0] bits (Channel 27 Sample time selection) */ #define ADC_SMPR1_SMP27_0 ((uint32_t)0x00200000) /*!< Bit 0 */ #define ADC_SMPR1_SMP27_1 ((uint32_t)0x00400000) /*!< Bit 1 */ #define ADC_SMPR1_SMP27_2 ((uint32_t)0x00800000) /*!< Bit 2 */ #define ADC_SMPR1_SMP28 ((uint32_t)0x07000000) /*!< SMP28[2:0] bits (Channel 28 Sample time selection) */ #define ADC_SMPR1_SMP28_0 ((uint32_t)0x01000000) /*!< Bit 0 */ #define ADC_SMPR1_SMP28_1 ((uint32_t)0x02000000) /*!< Bit 1 */ #define ADC_SMPR1_SMP28_2 ((uint32_t)0x04000000) /*!< Bit 2 */ #define ADC_SMPR1_SMP29 ((uint32_t)0x38000000) /*!< SMP29[2:0] bits (Channel 29 Sample time selection) */ #define ADC_SMPR1_SMP29_0 ((uint32_t)0x08000000) /*!< Bit 0 */ #define ADC_SMPR1_SMP29_1 ((uint32_t)0x10000000) /*!< Bit 1 */ #define ADC_SMPR1_SMP29_2 ((uint32_t)0x20000000) /*!< Bit 2 */ /****************** Bit definition for ADC_SMPR2 register *******************/ #define ADC_SMPR2_SMP10 ((uint32_t)0x00000007) /*!< SMP10[2:0] bits (Channel 10 Sample time selection) */ #define ADC_SMPR2_SMP10_0 ((uint32_t)0x00000001) /*!< Bit 0 */ #define ADC_SMPR2_SMP10_1 ((uint32_t)0x00000002) /*!< Bit 1 */ #define ADC_SMPR2_SMP10_2 ((uint32_t)0x00000004) /*!< Bit 2 */ #define ADC_SMPR2_SMP11 ((uint32_t)0x00000038) /*!< SMP11[2:0] bits (Channel 11 Sample time selection) */ #define ADC_SMPR2_SMP11_0 ((uint32_t)0x00000008) /*!< Bit 0 */ #define ADC_SMPR2_SMP11_1 ((uint32_t)0x00000010) /*!< Bit 1 */ #define ADC_SMPR2_SMP11_2 ((uint32_t)0x00000020) /*!< Bit 2 */ #define ADC_SMPR2_SMP12 ((uint32_t)0x000001C0) /*!< SMP12[2:0] bits (Channel 12 Sample time selection) */ #define ADC_SMPR2_SMP12_0 ((uint32_t)0x00000040) /*!< Bit 0 */ #define ADC_SMPR2_SMP12_1 ((uint32_t)0x00000080) /*!< Bit 1 */ #define ADC_SMPR2_SMP12_2 ((uint32_t)0x00000100) /*!< Bit 2 */ #define ADC_SMPR2_SMP13 ((uint32_t)0x00000E00) /*!< SMP13[2:0] bits (Channel 13 Sample time selection) */ #define ADC_SMPR2_SMP13_0 ((uint32_t)0x00000200) /*!< Bit 0 */ #define ADC_SMPR2_SMP13_1 ((uint32_t)0x00000400) /*!< Bit 1 */ #define ADC_SMPR2_SMP13_2 ((uint32_t)0x00000800) /*!< Bit 2 */ #define ADC_SMPR2_SMP14 ((uint32_t)0x00007000) /*!< SMP14[2:0] bits (Channel 14 Sample time selection) */ #define ADC_SMPR2_SMP14_0 ((uint32_t)0x00001000) /*!< Bit 0 */ #define ADC_SMPR2_SMP14_1 ((uint32_t)0x00002000) /*!< Bit 1 */ #define ADC_SMPR2_SMP14_2 ((uint32_t)0x00004000) /*!< Bit 2 */ #define ADC_SMPR2_SMP15 ((uint32_t)0x00038000) /*!< SMP15[2:0] bits (Channel 5 Sample time selection) */ #define ADC_SMPR2_SMP15_0 ((uint32_t)0x00008000) /*!< Bit 0 */ #define ADC_SMPR2_SMP15_1 ((uint32_t)0x00010000) /*!< Bit 1 */ #define ADC_SMPR2_SMP15_2 ((uint32_t)0x00020000) /*!< Bit 2 */ #define ADC_SMPR2_SMP16 ((uint32_t)0x001C0000) /*!< SMP16[2:0] bits (Channel 16 Sample time selection) */ #define ADC_SMPR2_SMP16_0 ((uint32_t)0x00040000) /*!< Bit 0 */ #define ADC_SMPR2_SMP16_1 ((uint32_t)0x00080000) /*!< Bit 1 */ #define ADC_SMPR2_SMP16_2 ((uint32_t)0x00100000) /*!< Bit 2 */ #define ADC_SMPR2_SMP17 ((uint32_t)0x00E00000) /*!< SMP17[2:0] bits (Channel 17 Sample time selection) */ #define ADC_SMPR2_SMP17_0 ((uint32_t)0x00200000) /*!< Bit 0 */ #define ADC_SMPR2_SMP17_1 ((uint32_t)0x00400000) /*!< Bit 1 */ #define ADC_SMPR2_SMP17_2 ((uint32_t)0x00800000) /*!< Bit 2 */ #define ADC_SMPR2_SMP18 ((uint32_t)0x07000000) /*!< SMP18[2:0] bits (Channel 18 Sample time selection) */ #define ADC_SMPR2_SMP18_0 ((uint32_t)0x01000000) /*!< Bit 0 */ #define ADC_SMPR2_SMP18_1 ((uint32_t)0x02000000) /*!< Bit 1 */ #define ADC_SMPR2_SMP18_2 ((uint32_t)0x04000000) /*!< Bit 2 */ #define ADC_SMPR2_SMP19 ((uint32_t)0x38000000) /*!< SMP19[2:0] bits (Channel 19 Sample time selection) */ #define ADC_SMPR2_SMP19_0 ((uint32_t)0x08000000) /*!< Bit 0 */ #define ADC_SMPR2_SMP19_1 ((uint32_t)0x10000000) /*!< Bit 1 */ #define ADC_SMPR2_SMP19_2 ((uint32_t)0x20000000) /*!< Bit 2 */ /****************** Bit definition for ADC_SMPR3 register *******************/ #define ADC_SMPR3_SMP0 ((uint32_t)0x00000007) /*!< SMP0[2:0] bits (Channel 0 Sample time selection) */ #define ADC_SMPR3_SMP0_0 ((uint32_t)0x00000001) /*!< Bit 0 */ #define ADC_SMPR3_SMP0_1 ((uint32_t)0x00000002) /*!< Bit 1 */ #define ADC_SMPR3_SMP0_2 ((uint32_t)0x00000004) /*!< Bit 2 */ #define ADC_SMPR3_SMP1 ((uint32_t)0x00000038) /*!< SMP1[2:0] bits (Channel 1 Sample time selection) */ #define ADC_SMPR3_SMP1_0 ((uint32_t)0x00000008) /*!< Bit 0 */ #define ADC_SMPR3_SMP1_1 ((uint32_t)0x00000010) /*!< Bit 1 */ #define ADC_SMPR3_SMP1_2 ((uint32_t)0x00000020) /*!< Bit 2 */ #define ADC_SMPR3_SMP2 ((uint32_t)0x000001C0) /*!< SMP2[2:0] bits (Channel 2 Sample time selection) */ #define ADC_SMPR3_SMP2_0 ((uint32_t)0x00000040) /*!< Bit 0 */ #define ADC_SMPR3_SMP2_1 ((uint32_t)0x00000080) /*!< Bit 1 */ #define ADC_SMPR3_SMP2_2 ((uint32_t)0x00000100) /*!< Bit 2 */ #define ADC_SMPR3_SMP3 ((uint32_t)0x00000E00) /*!< SMP3[2:0] bits (Channel 3 Sample time selection) */ #define ADC_SMPR3_SMP3_0 ((uint32_t)0x00000200) /*!< Bit 0 */ #define ADC_SMPR3_SMP3_1 ((uint32_t)0x00000400) /*!< Bit 1 */ #define ADC_SMPR3_SMP3_2 ((uint32_t)0x00000800) /*!< Bit 2 */ #define ADC_SMPR3_SMP4 ((uint32_t)0x00007000) /*!< SMP4[2:0] bits (Channel 4 Sample time selection) */ #define ADC_SMPR3_SMP4_0 ((uint32_t)0x00001000) /*!< Bit 0 */ #define ADC_SMPR3_SMP4_1 ((uint32_t)0x00002000) /*!< Bit 1 */ #define ADC_SMPR3_SMP4_2 ((uint32_t)0x00004000) /*!< Bit 2 */ #define ADC_SMPR3_SMP5 ((uint32_t)0x00038000) /*!< SMP5[2:0] bits (Channel 5 Sample time selection) */ #define ADC_SMPR3_SMP5_0 ((uint32_t)0x00008000) /*!< Bit 0 */ #define ADC_SMPR3_SMP5_1 ((uint32_t)0x00010000) /*!< Bit 1 */ #define ADC_SMPR3_SMP5_2 ((uint32_t)0x00020000) /*!< Bit 2 */ #define ADC_SMPR3_SMP6 ((uint32_t)0x001C0000) /*!< SMP6[2:0] bits (Channel 6 Sample time selection) */ #define ADC_SMPR3_SMP6_0 ((uint32_t)0x00040000) /*!< Bit 0 */ #define ADC_SMPR3_SMP6_1 ((uint32_t)0x00080000) /*!< Bit 1 */ #define ADC_SMPR3_SMP6_2 ((uint32_t)0x00100000) /*!< Bit 2 */ #define ADC_SMPR3_SMP7 ((uint32_t)0x00E00000) /*!< SMP7[2:0] bits (Channel 7 Sample time selection) */ #define ADC_SMPR3_SMP7_0 ((uint32_t)0x00200000) /*!< Bit 0 */ #define ADC_SMPR3_SMP7_1 ((uint32_t)0x00400000) /*!< Bit 1 */ #define ADC_SMPR3_SMP7_2 ((uint32_t)0x00800000) /*!< Bit 2 */ #define ADC_SMPR3_SMP8 ((uint32_t)0x07000000) /*!< SMP8[2:0] bits (Channel 8 Sample time selection) */ #define ADC_SMPR3_SMP8_0 ((uint32_t)0x01000000) /*!< Bit 0 */ #define ADC_SMPR3_SMP8_1 ((uint32_t)0x02000000) /*!< Bit 1 */ #define ADC_SMPR3_SMP8_2 ((uint32_t)0x04000000) /*!< Bit 2 */ #define ADC_SMPR3_SMP9 ((uint32_t)0x38000000) /*!< SMP9[2:0] bits (Channel 9 Sample time selection) */ #define ADC_SMPR3_SMP9_0 ((uint32_t)0x08000000) /*!< Bit 0 */ #define ADC_SMPR3_SMP9_1 ((uint32_t)0x10000000) /*!< Bit 1 */ #define ADC_SMPR3_SMP9_2 ((uint32_t)0x20000000) /*!< Bit 2 */ /****************** Bit definition for ADC_JOFR1 register *******************/ #define ADC_JOFR1_JOFFSET1 ((uint32_t)0x00000FFF) /*!< Data offset for injected channel 1 */ /****************** Bit definition for ADC_JOFR2 register *******************/ #define ADC_JOFR2_JOFFSET2 ((uint32_t)0x00000FFF) /*!< Data offset for injected channel 2 */ /****************** Bit definition for ADC_JOFR3 register *******************/ #define ADC_JOFR3_JOFFSET3 ((uint32_t)0x00000FFF) /*!< Data offset for injected channel 3 */ /****************** Bit definition for ADC_JOFR4 register *******************/ #define ADC_JOFR4_JOFFSET4 ((uint32_t)0x00000FFF) /*!< Data offset for injected channel 4 */ /******************* Bit definition for ADC_HTR register ********************/ #define ADC_HTR_HT ((uint32_t)0x00000FFF) /*!< Analog watchdog high threshold */ /******************* Bit definition for ADC_LTR register ********************/ #define ADC_LTR_LT ((uint32_t)0x00000FFF) /*!< Analog watchdog low threshold */ /******************* Bit definition for ADC_SQR1 register *******************/ #define ADC_SQR1_L ((uint32_t)0x01F00000) /*!< L[4:0] bits (Regular channel sequence length) */ #define ADC_SQR1_L_0 ((uint32_t)0x00100000) /*!< Bit 0 */ #define ADC_SQR1_L_1 ((uint32_t)0x00200000) /*!< Bit 1 */ #define ADC_SQR1_L_2 ((uint32_t)0x00400000) /*!< Bit 2 */ #define ADC_SQR1_L_3 ((uint32_t)0x00800000) /*!< Bit 3 */ #define ADC_SQR1_L_4 ((uint32_t)0x01000000) /*!< Bit 4 */ #define ADC_SQR1_SQ28 ((uint32_t)0x000F8000) /*!< SQ28[4:0] bits (25th conversion in regular sequence) */ #define ADC_SQR1_SQ28_0 ((uint32_t)0x00008000) /*!< Bit 0 */ #define ADC_SQR1_SQ28_1 ((uint32_t)0x00010000) /*!< Bit 1 */ #define ADC_SQR1_SQ28_2 ((uint32_t)0x00020000) /*!< Bit 2 */ #define ADC_SQR1_SQ28_3 ((uint32_t)0x00040000) /*!< Bit 3 */ #define ADC_SQR1_SQ28_4 ((uint32_t)0x00080000) /*!< Bit 4 */ #define ADC_SQR1_SQ27 ((uint32_t)0x00007C00) /*!< SQ27[4:0] bits (27th conversion in regular sequence) */ #define ADC_SQR1_SQ27_0 ((uint32_t)0x00000400) /*!< Bit 0 */ #define ADC_SQR1_SQ27_1 ((uint32_t)0x00000800) /*!< Bit 1 */ #define ADC_SQR1_SQ27_2 ((uint32_t)0x00001000) /*!< Bit 2 */ #define ADC_SQR1_SQ27_3 ((uint32_t)0x00002000) /*!< Bit 3 */ #define ADC_SQR1_SQ27_4 ((uint32_t)0x00004000) /*!< Bit 4 */ #define ADC_SQR1_SQ26 ((uint32_t)0x000003E0) /*!< SQ26[4:0] bits (26th conversion in regular sequence) */ #define ADC_SQR1_SQ26_0 ((uint32_t)0x00000020) /*!< Bit 0 */ #define ADC_SQR1_SQ26_1 ((uint32_t)0x00000040) /*!< Bit 1 */ #define ADC_SQR1_SQ26_2 ((uint32_t)0x00000080) /*!< Bit 2 */ #define ADC_SQR1_SQ26_3 ((uint32_t)0x00000100) /*!< Bit 3 */ #define ADC_SQR1_SQ26_4 ((uint32_t)0x00000200) /*!< Bit 4 */ #define ADC_SQR1_SQ25 ((uint32_t)0x0000001F) /*!< SQ25[4:0] bits (25th conversion in regular sequence) */ #define ADC_SQR1_SQ25_0 ((uint32_t)0x00000001) /*!< Bit 0 */ #define ADC_SQR1_SQ25_1 ((uint32_t)0x00000002) /*!< Bit 1 */ #define ADC_SQR1_SQ25_2 ((uint32_t)0x00000004) /*!< Bit 2 */ #define ADC_SQR1_SQ25_3 ((uint32_t)0x00000008) /*!< Bit 3 */ #define ADC_SQR1_SQ25_4 ((uint32_t)0x00000010) /*!< Bit 4 */ /******************* Bit definition for ADC_SQR2 register *******************/ #define ADC_SQR2_SQ19 ((uint32_t)0x0000001F) /*!< SQ19[4:0] bits (19th conversion in regular sequence) */ #define ADC_SQR2_SQ19_0 ((uint32_t)0x00000001) /*!< Bit 0 */ #define ADC_SQR2_SQ19_1 ((uint32_t)0x00000002) /*!< Bit 1 */ #define ADC_SQR2_SQ19_2 ((uint32_t)0x00000004) /*!< Bit 2 */ #define ADC_SQR2_SQ19_3 ((uint32_t)0x00000008) /*!< Bit 3 */ #define ADC_SQR2_SQ19_4 ((uint32_t)0x00000010) /*!< Bit 4 */ #define ADC_SQR2_SQ20 ((uint32_t)0x000003E0) /*!< SQ20[4:0] bits (20th conversion in regular sequence) */ #define ADC_SQR2_SQ20_0 ((uint32_t)0x00000020) /*!< Bit 0 */ #define ADC_SQR2_SQ20_1 ((uint32_t)0x00000040) /*!< Bit 1 */ #define ADC_SQR2_SQ20_2 ((uint32_t)0x00000080) /*!< Bit 2 */ #define ADC_SQR2_SQ20_3 ((uint32_t)0x00000100) /*!< Bit 3 */ #define ADC_SQR2_SQ20_4 ((uint32_t)0x00000200) /*!< Bit 4 */ #define ADC_SQR2_SQ21 ((uint32_t)0x00007C00) /*!< SQ21[4:0] bits (21th conversion in regular sequence) */ #define ADC_SQR2_SQ21_0 ((uint32_t)0x00000400) /*!< Bit 0 */ #define ADC_SQR2_SQ21_1 ((uint32_t)0x00000800) /*!< Bit 1 */ #define ADC_SQR2_SQ21_2 ((uint32_t)0x00001000) /*!< Bit 2 */ #define ADC_SQR2_SQ21_3 ((uint32_t)0x00002000) /*!< Bit 3 */ #define ADC_SQR2_SQ21_4 ((uint32_t)0x00004000) /*!< Bit 4 */ #define ADC_SQR2_SQ22 ((uint32_t)0x000F8000) /*!< SQ22[4:0] bits (22th conversion in regular sequence) */ #define ADC_SQR2_SQ22_0 ((uint32_t)0x00008000) /*!< Bit 0 */ #define ADC_SQR2_SQ22_1 ((uint32_t)0x00010000) /*!< Bit 1 */ #define ADC_SQR2_SQ22_2 ((uint32_t)0x00020000) /*!< Bit 2 */ #define ADC_SQR2_SQ22_3 ((uint32_t)0x00040000) /*!< Bit 3 */ #define ADC_SQR2_SQ22_4 ((uint32_t)0x00080000) /*!< Bit 4 */ #define ADC_SQR2_SQ23 ((uint32_t)0x01F00000) /*!< SQ23[4:0] bits (23th conversion in regular sequence) */ #define ADC_SQR2_SQ23_0 ((uint32_t)0x00100000) /*!< Bit 0 */ #define ADC_SQR2_SQ23_1 ((uint32_t)0x00200000) /*!< Bit 1 */ #define ADC_SQR2_SQ23_2 ((uint32_t)0x00400000) /*!< Bit 2 */ #define ADC_SQR2_SQ23_3 ((uint32_t)0x00800000) /*!< Bit 3 */ #define ADC_SQR2_SQ23_4 ((uint32_t)0x01000000) /*!< Bit 4 */ #define ADC_SQR2_SQ24 ((uint32_t)0x3E000000) /*!< SQ24[4:0] bits (24th conversion in regular sequence) */ #define ADC_SQR2_SQ24_0 ((uint32_t)0x02000000) /*!< Bit 0 */ #define ADC_SQR2_SQ24_1 ((uint32_t)0x04000000) /*!< Bit 1 */ #define ADC_SQR2_SQ24_2 ((uint32_t)0x08000000) /*!< Bit 2 */ #define ADC_SQR2_SQ24_3 ((uint32_t)0x10000000) /*!< Bit 3 */ #define ADC_SQR2_SQ24_4 ((uint32_t)0x20000000) /*!< Bit 4 */ /******************* Bit definition for ADC_SQR3 register *******************/ #define ADC_SQR3_SQ13 ((uint32_t)0x0000001F) /*!< SQ13[4:0] bits (13th conversion in regular sequence) */ #define ADC_SQR3_SQ13_0 ((uint32_t)0x00000001) /*!< Bit 0 */ #define ADC_SQR3_SQ13_1 ((uint32_t)0x00000002) /*!< Bit 1 */ #define ADC_SQR3_SQ13_2 ((uint32_t)0x00000004) /*!< Bit 2 */ #define ADC_SQR3_SQ13_3 ((uint32_t)0x00000008) /*!< Bit 3 */ #define ADC_SQR3_SQ13_4 ((uint32_t)0x00000010) /*!< Bit 4 */ #define ADC_SQR3_SQ14 ((uint32_t)0x000003E0) /*!< SQ14[4:0] bits (14th conversion in regular sequence) */ #define ADC_SQR3_SQ14_0 ((uint32_t)0x00000020) /*!< Bit 0 */ #define ADC_SQR3_SQ14_1 ((uint32_t)0x00000040) /*!< Bit 1 */ #define ADC_SQR3_SQ14_2 ((uint32_t)0x00000080) /*!< Bit 2 */ #define ADC_SQR3_SQ14_3 ((uint32_t)0x00000100) /*!< Bit 3 */ #define ADC_SQR3_SQ14_4 ((uint32_t)0x00000200) /*!< Bit 4 */ #define ADC_SQR3_SQ15 ((uint32_t)0x00007C00) /*!< SQ15[4:0] bits (15th conversion in regular sequence) */ #define ADC_SQR3_SQ15_0 ((uint32_t)0x00000400) /*!< Bit 0 */ #define ADC_SQR3_SQ15_1 ((uint32_t)0x00000800) /*!< Bit 1 */ #define ADC_SQR3_SQ15_2 ((uint32_t)0x00001000) /*!< Bit 2 */ #define ADC_SQR3_SQ15_3 ((uint32_t)0x00002000) /*!< Bit 3 */ #define ADC_SQR3_SQ15_4 ((uint32_t)0x00004000) /*!< Bit 4 */ #define ADC_SQR3_SQ16 ((uint32_t)0x000F8000) /*!< SQ16[4:0] bits (16th conversion in regular sequence) */ #define ADC_SQR3_SQ16_0 ((uint32_t)0x00008000) /*!< Bit 0 */ #define ADC_SQR3_SQ16_1 ((uint32_t)0x00010000) /*!< Bit 1 */ #define ADC_SQR3_SQ16_2 ((uint32_t)0x00020000) /*!< Bit 2 */ #define ADC_SQR3_SQ16_3 ((uint32_t)0x00040000) /*!< Bit 3 */ #define ADC_SQR3_SQ16_4 ((uint32_t)0x00080000) /*!< Bit 4 */ #define ADC_SQR3_SQ17 ((uint32_t)0x01F00000) /*!< SQ17[4:0] bits (17th conversion in regular sequence) */ #define ADC_SQR3_SQ17_0 ((uint32_t)0x00100000) /*!< Bit 0 */ #define ADC_SQR3_SQ17_1 ((uint32_t)0x00200000) /*!< Bit 1 */ #define ADC_SQR3_SQ17_2 ((uint32_t)0x00400000) /*!< Bit 2 */ #define ADC_SQR3_SQ17_3 ((uint32_t)0x00800000) /*!< Bit 3 */ #define ADC_SQR3_SQ17_4 ((uint32_t)0x01000000) /*!< Bit 4 */ #define ADC_SQR3_SQ18 ((uint32_t)0x3E000000) /*!< SQ18[4:0] bits (18th conversion in regular sequence) */ #define ADC_SQR3_SQ18_0 ((uint32_t)0x02000000) /*!< Bit 0 */ #define ADC_SQR3_SQ18_1 ((uint32_t)0x04000000) /*!< Bit 1 */ #define ADC_SQR3_SQ18_2 ((uint32_t)0x08000000) /*!< Bit 2 */ #define ADC_SQR3_SQ18_3 ((uint32_t)0x10000000) /*!< Bit 3 */ #define ADC_SQR3_SQ18_4 ((uint32_t)0x20000000) /*!< Bit 4 */ /******************* Bit definition for ADC_SQR4 register *******************/ #define ADC_SQR4_SQ7 ((uint32_t)0x0000001F) /*!< SQ7[4:0] bits (7th conversion in regular sequence) */ #define ADC_SQR4_SQ7_0 ((uint32_t)0x00000001) /*!< Bit 0 */ #define ADC_SQR4_SQ7_1 ((uint32_t)0x00000002) /*!< Bit 1 */ #define ADC_SQR4_SQ7_2 ((uint32_t)0x00000004) /*!< Bit 2 */ #define ADC_SQR4_SQ7_3 ((uint32_t)0x00000008) /*!< Bit 3 */ #define ADC_SQR4_SQ7_4 ((uint32_t)0x00000010) /*!< Bit 4 */ #define ADC_SQR4_SQ8 ((uint32_t)0x000003E0) /*!< SQ8[4:0] bits (8th conversion in regular sequence) */ #define ADC_SQR4_SQ8_0 ((uint32_t)0x00000020) /*!< Bit 0 */ #define ADC_SQR4_SQ8_1 ((uint32_t)0x00000040) /*!< Bit 1 */ #define ADC_SQR4_SQ8_2 ((uint32_t)0x00000080) /*!< Bit 2 */ #define ADC_SQR4_SQ8_3 ((uint32_t)0x00000100) /*!< Bit 3 */ #define ADC_SQR4_SQ8_4 ((uint32_t)0x00000200) /*!< Bit 4 */ #define ADC_SQR4_SQ9 ((uint32_t)0x00007C00) /*!< SQ9[4:0] bits (9th conversion in regular sequence) */ #define ADC_SQR4_SQ9_0 ((uint32_t)0x00000400) /*!< Bit 0 */ #define ADC_SQR4_SQ9_1 ((uint32_t)0x00000800) /*!< Bit 1 */ #define ADC_SQR4_SQ9_2 ((uint32_t)0x00001000) /*!< Bit 2 */ #define ADC_SQR4_SQ9_3 ((uint32_t)0x00002000) /*!< Bit 3 */ #define ADC_SQR4_SQ9_4 ((uint32_t)0x00004000) /*!< Bit 4 */ #define ADC_SQR4_SQ10 ((uint32_t)0x000F8000) /*!< SQ10[4:0] bits (10th conversion in regular sequence) */ #define ADC_SQR4_SQ10_0 ((uint32_t)0x00008000) /*!< Bit 0 */ #define ADC_SQR4_SQ10_1 ((uint32_t)0x00010000) /*!< Bit 1 */ #define ADC_SQR4_SQ10_2 ((uint32_t)0x00020000) /*!< Bit 2 */ #define ADC_SQR4_SQ10_3 ((uint32_t)0x00040000) /*!< Bit 3 */ #define ADC_SQR4_SQ10_4 ((uint32_t)0x00080000) /*!< Bit 4 */ #define ADC_SQR4_SQ11 ((uint32_t)0x01F00000) /*!< SQ11[4:0] bits (11th conversion in regular sequence) */ #define ADC_SQR4_SQ11_0 ((uint32_t)0x00100000) /*!< Bit 0 */ #define ADC_SQR4_SQ11_1 ((uint32_t)0x00200000) /*!< Bit 1 */ #define ADC_SQR4_SQ11_2 ((uint32_t)0x00400000) /*!< Bit 2 */ #define ADC_SQR4_SQ11_3 ((uint32_t)0x00800000) /*!< Bit 3 */ #define ADC_SQR4_SQ11_4 ((uint32_t)0x01000000) /*!< Bit 4 */ #define ADC_SQR4_SQ12 ((uint32_t)0x3E000000) /*!< SQ12[4:0] bits (12th conversion in regular sequence) */ #define ADC_SQR4_SQ12_0 ((uint32_t)0x02000000) /*!< Bit 0 */ #define ADC_SQR4_SQ12_1 ((uint32_t)0x04000000) /*!< Bit 1 */ #define ADC_SQR4_SQ12_2 ((uint32_t)0x08000000) /*!< Bit 2 */ #define ADC_SQR4_SQ12_3 ((uint32_t)0x10000000) /*!< Bit 3 */ #define ADC_SQR4_SQ12_4 ((uint32_t)0x20000000) /*!< Bit 4 */ /******************* Bit definition for ADC_SQR5 register *******************/ #define ADC_SQR5_SQ1 ((uint32_t)0x0000001F) /*!< SQ1[4:0] bits (1st conversion in regular sequence) */ #define ADC_SQR5_SQ1_0 ((uint32_t)0x00000001) /*!< Bit 0 */ #define ADC_SQR5_SQ1_1 ((uint32_t)0x00000002) /*!< Bit 1 */ #define ADC_SQR5_SQ1_2 ((uint32_t)0x00000004) /*!< Bit 2 */ #define ADC_SQR5_SQ1_3 ((uint32_t)0x00000008) /*!< Bit 3 */ #define ADC_SQR5_SQ1_4 ((uint32_t)0x00000010) /*!< Bit 4 */ #define ADC_SQR5_SQ2 ((uint32_t)0x000003E0) /*!< SQ2[4:0] bits (2nd conversion in regular sequence) */ #define ADC_SQR5_SQ2_0 ((uint32_t)0x00000020) /*!< Bit 0 */ #define ADC_SQR5_SQ2_1 ((uint32_t)0x00000040) /*!< Bit 1 */ #define ADC_SQR5_SQ2_2 ((uint32_t)0x00000080) /*!< Bit 2 */ #define ADC_SQR5_SQ2_3 ((uint32_t)0x00000100) /*!< Bit 3 */ #define ADC_SQR5_SQ2_4 ((uint32_t)0x00000200) /*!< Bit 4 */ #define ADC_SQR5_SQ3 ((uint32_t)0x00007C00) /*!< SQ3[4:0] bits (3rd conversion in regular sequence) */ #define ADC_SQR5_SQ3_0 ((uint32_t)0x00000400) /*!< Bit 0 */ #define ADC_SQR5_SQ3_1 ((uint32_t)0x00000800) /*!< Bit 1 */ #define ADC_SQR5_SQ3_2 ((uint32_t)0x00001000) /*!< Bit 2 */ #define ADC_SQR5_SQ3_3 ((uint32_t)0x00002000) /*!< Bit 3 */ #define ADC_SQR5_SQ3_4 ((uint32_t)0x00004000) /*!< Bit 4 */ #define ADC_SQR5_SQ4 ((uint32_t)0x000F8000) /*!< SQ4[4:0] bits (4th conversion in regular sequence) */ #define ADC_SQR5_SQ4_0 ((uint32_t)0x00008000) /*!< Bit 0 */ #define ADC_SQR5_SQ4_1 ((uint32_t)0x00010000) /*!< Bit 1 */ #define ADC_SQR5_SQ4_2 ((uint32_t)0x00020000) /*!< Bit 2 */ #define ADC_SQR5_SQ4_3 ((uint32_t)0x00040000) /*!< Bit 3 */ #define ADC_SQR5_SQ4_4 ((uint32_t)0x00080000) /*!< Bit 4 */ #define ADC_SQR5_SQ5 ((uint32_t)0x01F00000) /*!< SQ5[4:0] bits (5th conversion in regular sequence) */ #define ADC_SQR5_SQ5_0 ((uint32_t)0x00100000) /*!< Bit 0 */ #define ADC_SQR5_SQ5_1 ((uint32_t)0x00200000) /*!< Bit 1 */ #define ADC_SQR5_SQ5_2 ((uint32_t)0x00400000) /*!< Bit 2 */ #define ADC_SQR5_SQ5_3 ((uint32_t)0x00800000) /*!< Bit 3 */ #define ADC_SQR5_SQ5_4 ((uint32_t)0x01000000) /*!< Bit 4 */ #define ADC_SQR5_SQ6 ((uint32_t)0x3E000000) /*!< SQ6[4:0] bits (6th conversion in regular sequence) */ #define ADC_SQR5_SQ6_0 ((uint32_t)0x02000000) /*!< Bit 0 */ #define ADC_SQR5_SQ6_1 ((uint32_t)0x04000000) /*!< Bit 1 */ #define ADC_SQR5_SQ6_2 ((uint32_t)0x08000000) /*!< Bit 2 */ #define ADC_SQR5_SQ6_3 ((uint32_t)0x10000000) /*!< Bit 3 */ #define ADC_SQR5_SQ6_4 ((uint32_t)0x20000000) /*!< Bit 4 */ /******************* Bit definition for ADC_JSQR register *******************/ #define ADC_JSQR_JSQ1 ((uint32_t)0x0000001F) /*!< JSQ1[4:0] bits (1st conversion in injected sequence) */ #define ADC_JSQR_JSQ1_0 ((uint32_t)0x00000001) /*!< Bit 0 */ #define ADC_JSQR_JSQ1_1 ((uint32_t)0x00000002) /*!< Bit 1 */ #define ADC_JSQR_JSQ1_2 ((uint32_t)0x00000004) /*!< Bit 2 */ #define ADC_JSQR_JSQ1_3 ((uint32_t)0x00000008) /*!< Bit 3 */ #define ADC_JSQR_JSQ1_4 ((uint32_t)0x00000010) /*!< Bit 4 */ #define ADC_JSQR_JSQ2 ((uint32_t)0x000003E0) /*!< JSQ2[4:0] bits (2nd conversion in injected sequence) */ #define ADC_JSQR_JSQ2_0 ((uint32_t)0x00000020) /*!< Bit 0 */ #define ADC_JSQR_JSQ2_1 ((uint32_t)0x00000040) /*!< Bit 1 */ #define ADC_JSQR_JSQ2_2 ((uint32_t)0x00000080) /*!< Bit 2 */ #define ADC_JSQR_JSQ2_3 ((uint32_t)0x00000100) /*!< Bit 3 */ #define ADC_JSQR_JSQ2_4 ((uint32_t)0x00000200) /*!< Bit 4 */ #define ADC_JSQR_JSQ3 ((uint32_t)0x00007C00) /*!< JSQ3[4:0] bits (3rd conversion in injected sequence) */ #define ADC_JSQR_JSQ3_0 ((uint32_t)0x00000400) /*!< Bit 0 */ #define ADC_JSQR_JSQ3_1 ((uint32_t)0x00000800) /*!< Bit 1 */ #define ADC_JSQR_JSQ3_2 ((uint32_t)0x00001000) /*!< Bit 2 */ #define ADC_JSQR_JSQ3_3 ((uint32_t)0x00002000) /*!< Bit 3 */ #define ADC_JSQR_JSQ3_4 ((uint32_t)0x00004000) /*!< Bit 4 */ #define ADC_JSQR_JSQ4 ((uint32_t)0x000F8000) /*!< JSQ4[4:0] bits (4th conversion in injected sequence) */ #define ADC_JSQR_JSQ4_0 ((uint32_t)0x00008000) /*!< Bit 0 */ #define ADC_JSQR_JSQ4_1 ((uint32_t)0x00010000) /*!< Bit 1 */ #define ADC_JSQR_JSQ4_2 ((uint32_t)0x00020000) /*!< Bit 2 */ #define ADC_JSQR_JSQ4_3 ((uint32_t)0x00040000) /*!< Bit 3 */ #define ADC_JSQR_JSQ4_4 ((uint32_t)0x00080000) /*!< Bit 4 */ #define ADC_JSQR_JL ((uint32_t)0x00300000) /*!< JL[1:0] bits (Injected Sequence length) */ #define ADC_JSQR_JL_0 ((uint32_t)0x00100000) /*!< Bit 0 */ #define ADC_JSQR_JL_1 ((uint32_t)0x00200000) /*!< Bit 1 */ /******************* Bit definition for ADC_JDR1 register *******************/ #define ADC_JDR1_JDATA ((uint32_t)0x0000FFFF) /*!< Injected data */ /******************* Bit definition for ADC_JDR2 register *******************/ #define ADC_JDR2_JDATA ((uint32_t)0x0000FFFF) /*!< Injected data */ /******************* Bit definition for ADC_JDR3 register *******************/ #define ADC_JDR3_JDATA ((uint32_t)0x0000FFFF) /*!< Injected data */ /******************* Bit definition for ADC_JDR4 register *******************/ #define ADC_JDR4_JDATA ((uint32_t)0x0000FFFF) /*!< Injected data */ /******************** Bit definition for ADC_DR register ********************/ #define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!< Regular data */ /****************** Bit definition for ADC_SMPR0 register *******************/ #define ADC_SMPR0_SMP30 ((uint32_t)0x00000007) /*!< SMP30[2:0] bits (Channel 30 Sample time selection) */ #define ADC_SMPR0_SMP30_0 ((uint32_t)0x00000001) /*!< Bit 0 */ #define ADC_SMPR0_SMP30_1 ((uint32_t)0x00000002) /*!< Bit 1 */ #define ADC_SMPR0_SMP30_2 ((uint32_t)0x00000004) /*!< Bit 2 */ #define ADC_SMPR0_SMP31 ((uint32_t)0x00000038) /*!< SMP31[2:0] bits (Channel 31 Sample time selection) */ #define ADC_SMPR0_SMP31_0 ((uint32_t)0x00000008) /*!< Bit 0 */ #define ADC_SMPR0_SMP31_1 ((uint32_t)0x00000010) /*!< Bit 1 */ #define ADC_SMPR0_SMP31_2 ((uint32_t)0x00000020) /*!< Bit 2 */ /******************* Bit definition for ADC_CSR register ********************/ #define ADC_CSR_AWD1 ((uint32_t)0x00000001) /*!< ADC1 Analog watchdog flag */ #define ADC_CSR_EOC1 ((uint32_t)0x00000002) /*!< ADC1 End of conversion */ #define ADC_CSR_JEOC1 ((uint32_t)0x00000004) /*!< ADC1 Injected channel end of conversion */ #define ADC_CSR_JSTRT1 ((uint32_t)0x00000008) /*!< ADC1 Injected channel Start flag */ #define ADC_CSR_STRT1 ((uint32_t)0x00000010) /*!< ADC1 Regular channel Start flag */ #define ADC_CSR_OVR1 ((uint32_t)0x00000020) /*!< ADC1 overrun flag */ #define ADC_CSR_ADONS1 ((uint32_t)0x00000040) /*!< ADON status of ADC1 */ /******************* Bit definition for ADC_CCR register ********************/ #define ADC_CCR_ADCPRE ((uint32_t)0x00030000) /*!< ADC prescaler*/ #define ADC_CCR_ADCPRE_0 ((uint32_t)0x00010000) /*!< Bit 0 */ #define ADC_CCR_ADCPRE_1 ((uint32_t)0x00020000) /*!< Bit 1 */ #define ADC_CCR_TSVREFE ((uint32_t)0x00800000) /*!< Temperature Sensor and VREFINT Enable */ /******************************************************************************/ /* */ /* Analog Comparators (COMP) */ /* */ /******************************************************************************/ /****************** Bit definition for COMP_CSR register ********************/ #define COMP_CSR_10KPU ((uint32_t)0x00000001) /*!< 10K pull-up resistor */ #define COMP_CSR_400KPU ((uint32_t)0x00000002) /*!< 400K pull-up resistor */ #define COMP_CSR_10KPD ((uint32_t)0x00000004) /*!< 10K pull-down resistor */ #define COMP_CSR_400KPD ((uint32_t)0x00000008) /*!< 400K pull-down resistor */ #define COMP_CSR_CMP1EN ((uint32_t)0x00000010) /*!< Comparator 1 enable */ #define COMP_CSR_SW1 ((uint32_t)0x00000020) /*!< SW1 analog switch enable */ #define COMP_CSR_CMP1OUT ((uint32_t)0x00000080) /*!< Comparator 1 output */ #define COMP_CSR_SPEED ((uint32_t)0x00001000) /*!< Comparator 2 speed */ #define COMP_CSR_CMP2OUT ((uint32_t)0x00002000) /*!< Comparator 2 ouput */ #define COMP_CSR_VREFOUTEN ((uint32_t)0x00010000) /*!< Comparator Vref Enable */ #define COMP_CSR_WNDWE ((uint32_t)0x00020000) /*!< Window mode enable */ #define COMP_CSR_INSEL ((uint32_t)0x001C0000) /*!< INSEL[2:0] Inversion input Selection */ #define COMP_CSR_INSEL_0 ((uint32_t)0x00040000) /*!< Bit 0 */ #define COMP_CSR_INSEL_1 ((uint32_t)0x00080000) /*!< Bit 1 */ #define COMP_CSR_INSEL_2 ((uint32_t)0x00100000) /*!< Bit 2 */ #define COMP_CSR_OUTSEL ((uint32_t)0x00E00000) /*!< OUTSEL[2:0] comparator 2 output redirection */ #define COMP_CSR_OUTSEL_0 ((uint32_t)0x00200000) /*!< Bit 0 */ #define COMP_CSR_OUTSEL_1 ((uint32_t)0x00400000) /*!< Bit 1 */ #define COMP_CSR_OUTSEL_2 ((uint32_t)0x00800000) /*!< Bit 2 */ #define COMP_CSR_FCH3 ((uint32_t)0x04000000) /*!< Bit 26 */ #define COMP_CSR_FCH8 ((uint32_t)0x08000000) /*!< Bit 27 */ #define COMP_CSR_RCH13 ((uint32_t)0x10000000) /*!< Bit 28 */ #define COMP_CSR_CAIE ((uint32_t)0x20000000) /*!< Bit 29 */ #define COMP_CSR_CAIF ((uint32_t)0x40000000) /*!< Bit 30 */ #define COMP_CSR_TSUSP ((uint32_t)0x80000000) /*!< Bit 31 */ /******************************************************************************/ /* */ /* Operational Amplifier (OPAMP) */ /* */ /******************************************************************************/ /******************* Bit definition for OPAMP_CSR register ******************/ #define OPAMP_CSR_OPA1PD ((uint32_t)0x00000001) /*!< OPAMP1 disable */ #define OPAMP_CSR_S3SEL1 ((uint32_t)0x00000002) /*!< Switch 3 for OPAMP1 Enable */ #define OPAMP_CSR_S4SEL1 ((uint32_t)0x00000004) /*!< Switch 4 for OPAMP1 Enable */ #define OPAMP_CSR_S5SEL1 ((uint32_t)0x00000008) /*!< Switch 5 for OPAMP1 Enable */ #define OPAMP_CSR_S6SEL1 ((uint32_t)0x00000010) /*!< Switch 6 for OPAMP1 Enable */ #define OPAMP_CSR_OPA1CAL_L ((uint32_t)0x00000020) /*!< OPAMP1 Offset calibration for P differential pair */ #define OPAMP_CSR_OPA1CAL_H ((uint32_t)0x00000040) /*!< OPAMP1 Offset calibration for N differential pair */ #define OPAMP_CSR_OPA1LPM ((uint32_t)0x00000080) /*!< OPAMP1 Low power enable */ #define OPAMP_CSR_OPA2PD ((uint32_t)0x00000100) /*!< OPAMP2 disable */ #define OPAMP_CSR_S3SEL2 ((uint32_t)0x00000200) /*!< Switch 3 for OPAMP2 Enable */ #define OPAMP_CSR_S4SEL2 ((uint32_t)0x00000400) /*!< Switch 4 for OPAMP2 Enable */ #define OPAMP_CSR_S5SEL2 ((uint32_t)0x00000800) /*!< Switch 5 for OPAMP2 Enable */ #define OPAMP_CSR_S6SEL2 ((uint32_t)0x00001000) /*!< Switch 6 for OPAMP2 Enable */ #define OPAMP_CSR_OPA2CAL_L ((uint32_t)0x00002000) /*!< OPAMP2 Offset calibration for P differential pair */ #define OPAMP_CSR_OPA2CAL_H ((uint32_t)0x00004000) /*!< OPAMP2 Offset calibration for N differential pair */ #define OPAMP_CSR_OPA2LPM ((uint32_t)0x00008000) /*!< OPAMP2 Low power enable */ #define OPAMP_CSR_ANAWSEL1 ((uint32_t)0x01000000) /*!< Switch ANA Enable for OPAMP1 */ #define OPAMP_CSR_ANAWSEL2 ((uint32_t)0x02000000) /*!< Switch ANA Enable for OPAMP2 */ #define OPAMP_CSR_S7SEL2 ((uint32_t)0x08000000) /*!< Switch 7 for OPAMP2 Enable */ #define OPAMP_CSR_AOP_RANGE ((uint32_t)0x10000000) /*!< Power range selection */ #define OPAMP_CSR_OPA1CALOUT ((uint32_t)0x20000000) /*!< OPAMP1 calibration output */ #define OPAMP_CSR_OPA2CALOUT ((uint32_t)0x40000000) /*!< OPAMP2 calibration output */ /******************* Bit definition for OPAMP_OTR register ******************/ #define OPAMP_OTR_AO1_OPT_OFFSET_TRIM_LOW ((uint32_t)0x0000001F) /*!< Offset trim for transistors differential pair PMOS of OPAMP1 */ #define OPAMP_OTR_AO1_OPT_OFFSET_TRIM_HIGH ((uint32_t)0x000003E0) /*!< Offset trim for transistors differential pair NMOS of OPAMP1 */ #define OPAMP_OTR_AO2_OPT_OFFSET_TRIM_LOW ((uint32_t)0x00007C00) /*!< Offset trim for transistors differential pair PMOS of OPAMP2 */ #define OPAMP_OTR_AO2_OPT_OFFSET_TRIM_HIGH ((uint32_t)0x000F8000) /*!< Offset trim for transistors differential pair NMOS of OPAMP2 */ #define OPAMP_OTR_OT_USER ((uint32_t)0x80000000) /*!< Switch to OPAMP offset user trimmed values */ /******************* Bit definition for OPAMP_LPOTR register ****************/ #define OPAMP_OTR_AO1_OPT_OFFSET_TRIM_LP_LOW ((uint32_t)0x0000001F) /*!< Offset trim for transistors differential pair PMOS of OPAMP1 */ #define OPAMP_OTR_AO1_OPT_OFFSET_TRIM_LP_HIGH ((uint32_t)0x000003E0) /*!< Offset trim for transistors differential pair NMOS of OPAMP1 */ #define OPAMP_OTR_AO2_OPT_OFFSET_TRIM_LP_LOW ((uint32_t)0x00007C00) /*!< Offset trim for transistors differential pair PMOS of OPAMP2 */ #define OPAMP_OTR_AO2_OPT_OFFSET_TRIM_LP_HIGH ((uint32_t)0x000F8000) /*!< Offset trim for transistors differential pair NMOS of OPAMP2 */ /******************************************************************************/ /* */ /* CRC calculation unit (CRC) */ /* */ /******************************************************************************/ /******************* Bit definition for CRC_DR register *********************/ #define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */ /******************* Bit definition for CRC_IDR register ********************/ #define CRC_IDR_IDR ((uint32_t)0x000000FF) /*!< General-purpose 8-bit data register bits */ /******************** Bit definition for CRC_CR register ********************/ #define CRC_CR_RESET ((uint32_t)0x00000001) /*!< RESET bit */ /******************************************************************************/ /* */ /* Digital to Analog Converter (DAC) */ /* */ /******************************************************************************/ /******************** Bit definition for DAC_CR register ********************/ #define DAC_CR_EN1 ((uint32_t)0x00000001) /*!