/* ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio. This file is part of ChibiOS. ChibiOS is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. ChibiOS is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ /** * @file m25q.h * @brief Micron serial flash driver header. * * @addtogroup M25Q * @ingroup EX_MICRON * @{ */ #ifndef M25Q_H #define M25Q_H #include "hal_jesd216_flash.h" /*===========================================================================*/ /* Driver constants. */ /*===========================================================================*/ /** * @name Version identification * @{ */ /** * @brief M25Q driver version string. */ #define EX_M25Q_VERSION "1.0.0" /** * @brief M25Q driver version major number. */ #define EX_M25Q_MAJOR 1 /** * @brief M25Q driver version minor number. */ #define EX_M25Q_MINOR 0 /** * @brief M25Q driver version patch number. */ #define EX_M25Q_PATCH 0 /** @} */ /** * @name Command codes * @{ */ #define M25Q_CMD_RESET_ENABLE 0x66 #define M25Q_CMD_RESET_MEMORY 0x99 #define M25Q_CMD_READ_ID 0x9F #define M25Q_CMD_MULTIPLE_IO_READ_ID 0xAF #define M25Q_CMD_READ_DISCOVERY_PARAMETER 0x5A #define M25Q_CMD_READ 0x03 #define M25Q_CMD_FAST_READ 0x0B #define M25Q_CMD_WRITE_ENABLE 0x06 #define M25Q_CMD_WRITE_DISABLE 0x04 #define M25Q_CMD_READ_STATUS_REGISTER 0x05 #define M25Q_CMD_WRITE_STATUS_REGISTER 0x01 #define M25Q_CMD_READ_LOCK_REGISTER 0xE8 #define M25Q_CMD_WRITE_LOCK_REGISTER 0xE5 #define M25Q_CMD_READ_FLAG_STATUS_REGISTER 0x70 #define M25Q_CMD_CLEAR_FLAG_STATUS_REGISTER 0x50 #define M25Q_CMD_READ_NV_CONFIGURATION_REGISTER 0xB5 #define M25Q_CMD_WRITE_NV_CONFIGURATION_REGISTER 0xB1 #define M25Q_CMD_READ_V_CONF_REGISTER 0x85 #define M25Q_CMD_WRITE_V_CONF_REGISTER 0x81 #define M25Q_CMD_READ_ENHANCED_V_CONF_REGISTER 0x65 #define M25Q_CMD_WRITE_ENHANCED_V_CONF_REGISTER 0x61 #define M25Q_CMD_PAGE_PROGRAM 0x02 #define M25Q_CMD_SUBSECTOR_ERASE 0x20 #define M25Q_CMD_SECTOR_ERASE 0xD8 #define M25Q_CMD_BULK_ERASE 0xC7 #define M25Q_CMD_PROGRAM_ERASE_RESUME 0x7A #define M25Q_CMD_PROGRAM_ERASE_SUSPEND 0x75 #define M25Q_CMD_READ_OTP_ARRAY 0x4B #define M25Q_CMD_PROGRAM_OTP_ARRAY 0x42 /** @} */ /** * @name Flags status register bits * @{ */ #define M25Q_FLAGS_PROGRAM_ERASE 0x80U #define M25Q_FLAGS_ERASE_SUSPEND 0x40U #define M25Q_FLAGS_ERASE_ERROR 0x20U #define M25Q_FLAGS_PROGRAM_ERROR 0x10U #define M25Q_FLAGS_VPP_ERROR 0x08U #define M25Q_FLAGS_PROGRAM_SUSPEND 0x04U #define M25Q_FLAGS_PROTECTION_ERROR 0x02U #define M25Q_FLAGS_RESERVED 0x01U #define M25Q_FLAGS_ALL_ERRORS (M25Q_FLAGS_ERASE_ERROR | \ M25Q_FLAGS_PROGRAM_ERROR | \ M25Q_FLAGS_VPP_ERROR | \ M25Q_FLAGS_PROTECTION_ERROR) /** @} */ /*===========================================================================*/ /* Driver pre-compile time settings. */ /*===========================================================================*/ /** * @name Configuration options * @{ */ /** * @brief Number of dummy cycles for fast read (1..15). * @details This is the number of dummy cycles to be used for fast read * operations. */ #if !defined(M25Q_READ_DUMMY_CYCLES) || defined(__DOXYGEN__) #define M25Q_READ_DUMMY_CYCLES 8 #endif /** * @brief Switch QSPI bus width on initialization. * @details A bus width initialization is performed by writing the * Enhanced Volatile Configuration Register. If the flash * device is configured using the Non Volatile Configuration * Register then this option is not required. * @note This option is only valid in QSPI bus modes. */ #if !defined(M25Q_SWITCH_WIDTH) || defined(__DOXYGEN__) #define M25Q_SWITCH_WIDTH TRUE #endif /** * @brief Delays insertions. * @details If enabled this options inserts delays into the flash waiting * routines releasing some extra CPU time for threads with lower * priority, this may slow down the driver a bit however. */ #if !defined(M25Q_NICE_WAITING) || defined(__DOXYGEN__) #define M25Q_NICE_WAITING TRUE #endif /** * @brief Uses 4kB sub-sectors rather than 64kB sectors. */ #if !defined(M25Q_USE_SUB_SECTORS) || defined(__DOXYGEN__) #define M25Q_USE_SUB_SECTORS FALSE #endif /** * @brief Supported JEDEC manufacturer identifiers. */ #if !defined(M25Q_SUPPORTED_MANUFACTURE_IDS) || defined(__DOXYGEN__) #define M25Q_SUPPORTED_MANUFACTURE_IDS {0x20} #endif /** * @brief Supported memory type identifiers. */ #if !defined(M25Q_SUPPORTED_MEMORY_TYPE_IDS) || defined(__DOXYGEN__) #define M25Q_SUPPORTED_MEMORY_TYPE_IDS {0xBA, 0xBB} #endif /** * @brief Size of the compare buffer. * @details This buffer is allocated in the stack frame of the function * @p flashVerifyErase() and its size must be a power of two. * Larger buffers lead to better verify performance but increase * stack usage for that function. */ #if !defined(M25Q_COMPARE_BUFFER_SIZE) || defined(__DOXYGEN__) #define M25Q_COMPARE_BUFFER_SIZE 32 #endif /** @} */ /*===========================================================================*/ /* Derived constants and error checks. */ /*===========================================================================*/ #if (M25Q_READ_DUMMY_CYCLES < 1) || (M25Q_READ_DUMMY_CYCLES > 15) #error "invalid M25Q_READ_DUMMY_CYCLES value (1..15)" #endif #if (M25Q_COMPARE_BUFFER_SIZE & (M25Q_COMPARE_BUFFER_SIZE - 1)) != 0 #error "invalid M25Q_COMPARE_BUFFER_SIZE value" #endif /*===========================================================================*/ /* Driver data structures and types. */ /*===========================================================================*/ /** * @brief Type of a M25Q configuration structure. */ typedef struct { _jesd216_config } M25QConfig; /** * @brief @p M25Q specific methods. */ #define _m25q_methods \ _jesd216_flash_methods /** * @extends JESD216FlashVMT * * @brief @p M25Q virtual methods table. */ struct M25QDriverVMT { _m25q_methods }; /** * @extends JESD216Flash * * @brief Type of M25Q flash class. */ typedef struct { /** * @brief M25QDriver Virtual Methods Table. */ const struct M25QDriverVMT *vmt; _jesd216_flash_data /** * @brief Current configuration data. */ const M25QConfig *config; /** * @brief Device ID and unique ID. */ uint8_t device_id[20]; } M25QDriver; /*===========================================================================*/ /* Driver macros. */ /*===========================================================================*/ /*===========================================================================*/ /* External declarations. */ /*===========================================================================*/ #ifdef __cplusplus extern "C" { #endif void m25qObjectInit(M25QDriver *devp); void m25qStart(M25QDriver *devp, const M25QConfig *config); void m25qStop(M25QDriver *devp); #if (JESD216_BUS_MODE != JESD216_BUS_MODE_SPI) || defined(__DOXYGEN__) #if (QSPI_SUPPORTS_MEMMAP == TRUE) || defined(__DOXYGEN__) void m25qMemoryMap(M25QDriver *devp, uint8_t ** addrp); void m25qMemoryUnmap(M25QDriver *devp); #endif /* QSPI_SUPPORTS_MEMMAP == TRUE */ #endif /* JESD216_BUS_MODE != JESD216_BUS_MODE_SPI */ #ifdef __cplusplus } #endif #endif /* M25Q_H */ /** @} */