/*
    ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
                 2011,2012 Giovanni Di Sirio.

    This file is part of ChibiOS/RT.

    ChibiOS/RT is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 3 of the License, or
    (at your option) any later version.

    ChibiOS/RT is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#include "ch.h"
#include "hal.h"

/**
 * @brief   PAL setup.
 * @details Digital I/O ports static configuration as defined in @p board.h.
 *          This variable is used by the HAL when initializing the PAL driver.
 */
#if HAL_USE_PAL || defined(__DOXYGEN__)
const PALConfig pal_default_config =
{
#if defined(PORTA)
  {VAL_PORTA, VAL_DDRA},
#endif
#if defined(PORTB)
  {VAL_PORTB, VAL_DDRB},
#endif
#if defined(PORTC)
  {VAL_PORTC, VAL_DDRC},
#endif
#if defined(PORTD)
  {VAL_PORTD, VAL_DDRD},
#endif
#if defined(PORTE)
  {VAL_PORTE, VAL_DDRE},
#endif
#if defined(PORTF)
  {VAL_PORTF, VAL_DDRF},
#endif
#if defined(PORTG)
  {VAL_PORTG, VAL_DDRG},
#endif
#if defined(PORTH)
  {VAL_PORTH, VAL_DDRH},
#endif
#if defined(PORTJ)
  {VAL_PORTJ, VAL_DDRJ},
#endif
#if defined(PORTK)
  {VAL_PORTK, VAL_DDRK},
#endif
#if defined(PORTL)
  {VAL_PORTL, VAL_DDRL},
#endif
};
#endif /* HAL_USE_PAL */

/**
 * @brief   Timer0 interrupt handler.
 */
CH_IRQ_HANDLER(TIMER0_COMPA_vect) {

  CH_IRQ_PROLOGUE();

  chSysLockFromIsr();
  chSysTimerHandlerI();
  chSysUnlockFromIsr();

  CH_IRQ_EPILOGUE();
}

/**
 * Board-specific initialization code.
 */
void boardInit(void) {

  /*
   * External interrupts setup, all disabled initially.
   */
  EICRA  = 0x00;
  EICRB  = 0x00;
  EIMSK  = 0x00;

  /*
   * Timer 0 setup.
   */
  TCCR0A  = (1 << WGM01) | (0 << WGM00) |                /* CTC mode.        */
            (0 << COM0A1) | (0 << COM0A0) |              /* OC0A disabled.   */
            (0 << COM0B1) | (0 << COM0B0);               /* OC0B disabled.   */
  TCCR0B  = (0 << WGM02) |                               /* CTC mode.        */
            (0 << CS02)  | (1 << CS01)  | (1 << CS00);   /* CLK/64 clock.    */
  OCR0A   = F_CPU / 64 / CH_FREQUENCY - 1;
  TCNT0   = 0;                                           /* Reset counter.   */
  TIFR0   = (1 << OCF0A);                                /* Reset pending.   */
  TIMSK0  = (1 << OCIE0A);                               /* IRQ on compare.  */
}