From 9c9c52f753a9caf51189ad9e1293476f2384676b Mon Sep 17 00:00:00 2001 From: gdisirio Date: Sat, 15 Jun 2013 16:48:36 +0000 Subject: git-svn-id: svn://svn.code.sf.net/p/chibios/svn/branches/kernel_3_dev@5858 35acf78f-673a-0410-8e92-d51de3d6d3f4 --- testhal/LPC11xx/EXT/Makefile | 194 -- testhal/LPC11xx/EXT/chconf.h | 533 ----- testhal/LPC11xx/EXT/halconf.h | 314 --- testhal/LPC11xx/EXT/main.c | 92 - testhal/LPC11xx/EXT/mcuconf.h | 106 - testhal/LPC11xx/IRQ_STORM/Makefile | 196 -- testhal/LPC11xx/IRQ_STORM/chconf.h | 531 ----- testhal/LPC11xx/IRQ_STORM/halconf.h | 312 --- testhal/LPC11xx/IRQ_STORM/main.c | 324 --- testhal/LPC11xx/IRQ_STORM/mcuconf.h | 79 - testhal/LPC11xx/IRQ_STORM/readme.txt | 25 - testhal/LPC11xx/PWM/Makefile | 194 -- testhal/LPC11xx/PWM/chconf.h | 532 ----- testhal/LPC11xx/PWM/halconf.h | 314 --- testhal/LPC11xx/PWM/main.c | 106 - testhal/LPC11xx/PWM/mcuconf.h | 106 - testhal/LPC122x/EXT/Makefile | 196 -- testhal/LPC122x/EXT/chconf.h | 532 ----- testhal/LPC122x/EXT/halconf.h | 313 --- testhal/LPC122x/EXT/main.c | 111 - testhal/LPC122x/EXT/mcuconf.h | 124 -- testhal/LPC122x/IRQ_STORM/Makefile | 196 -- testhal/LPC122x/IRQ_STORM/chconf.h | 531 ----- testhal/LPC122x/IRQ_STORM/halconf.h | 312 --- testhal/LPC122x/IRQ_STORM/main.c | 324 --- testhal/LPC122x/IRQ_STORM/mcuconf.h | 84 - testhal/LPC122x/IRQ_STORM/readme.txt | 25 - testhal/LPC122x/PWM/Makefile | 196 -- testhal/LPC122x/PWM/chconf.h | 532 ----- testhal/LPC122x/PWM/halconf.h | 313 --- testhal/LPC122x/PWM/main.c | 96 - testhal/LPC122x/PWM/mcuconf.h | 124 -- testhal/LPC122x/RTC/Makefile | 199 -- testhal/LPC122x/RTC/chconf.h | 532 ----- testhal/LPC122x/RTC/halconf.h | 313 --- testhal/LPC122x/RTC/main.c | 286 --- testhal/LPC122x/RTC/mcuconf.h | 124 -- testhal/LPC13xx/IRQ_STORM/Makefile | 197 -- testhal/LPC13xx/IRQ_STORM/chconf.h | 531 ----- testhal/LPC13xx/IRQ_STORM/halconf.h | 312 --- testhal/LPC13xx/IRQ_STORM/main.c | 324 --- testhal/LPC13xx/IRQ_STORM/mcuconf.h | 76 - testhal/LPC13xx/IRQ_STORM/readme.txt | 25 - testhal/SPC560BCxx/CAN/Makefile | 140 -- testhal/SPC560BCxx/CAN/chconf.h | 529 ----- testhal/SPC560BCxx/CAN/halconf.h | 371 ---- testhal/SPC560BCxx/CAN/main.c | 149 -- testhal/SPC560BCxx/CAN/mcuconf.h | 223 -- testhal/SPC560BCxx/CAN/readme.txt | 27 - testhal/SPC560BCxx/ICU-PWM/Makefile | 121 -- testhal/SPC560BCxx/ICU-PWM/chconf.h | 536 ----- testhal/SPC560BCxx/ICU-PWM/halconf.h | 367 ---- testhal/SPC560BCxx/ICU-PWM/main.c | 151 -- testhal/SPC560BCxx/ICU-PWM/mcuconf.h | 242 --- testhal/SPC560BCxx/ICU-PWM/readme.txt | 27 - testhal/SPC560Dxx/SPI/.cproject | 51 - testhal/SPC560Dxx/SPI/.project | 38 - testhal/SPC560Dxx/SPI/Makefile | 168 -- testhal/SPC560Dxx/SPI/UDE/debug .wsx | 273 --- ...stm_xpc560b_spc560d40_minimodule_debug_jtag.cfg | 160 -- testhal/SPC560Dxx/SPI/chconf.h | 531 ----- testhal/SPC560Dxx/SPI/halconf.h | 312 --- testhal/SPC560Dxx/SPI/main.c | 157 -- testhal/SPC560Dxx/SPI/mcuconf.h | 230 -- testhal/SPC560Dxx/SPI/readme.txt | 25 - testhal/SPC560Pxx/CAN/.cproject | 51 - testhal/SPC560Pxx/CAN/.project | 38 - testhal/SPC560Pxx/CAN/Makefile | 140 -- testhal/SPC560Pxx/CAN/chconf.h | 529 ----- testhal/SPC560Pxx/CAN/halconf.h | 371 ---- testhal/SPC560Pxx/CAN/main.c | 149 -- testhal/SPC560Pxx/CAN/mcuconf.h | 190 -- testhal/SPC560Pxx/CAN/readme.txt | 27 - testhal/SPC560Pxx/PWM-ICU/.cproject | 51 - testhal/SPC560Pxx/PWM-ICU/.project | 38 - testhal/SPC560Pxx/PWM-ICU/Makefile | 167 -- testhal/SPC560Pxx/PWM-ICU/chconf.h | 525 ----- testhal/SPC560Pxx/PWM-ICU/halconf.h | 367 ---- testhal/SPC560Pxx/PWM-ICU/main.c | 140 -- testhal/SPC560Pxx/PWM-ICU/mcuconf.h | 298 --- testhal/SPC560Pxx/PWM-ICU/readme.txt | 27 - testhal/SPC560Pxx/SPI/.cproject | 51 - testhal/SPC560Pxx/SPI/.project | 38 - testhal/SPC560Pxx/SPI/Makefile | 168 -- testhal/SPC560Pxx/SPI/chconf.h | 531 ----- testhal/SPC560Pxx/SPI/halconf.h | 312 --- testhal/SPC560Pxx/SPI/main.c | 157 -- testhal/SPC560Pxx/SPI/mcuconf.h | 298 --- testhal/SPC560Pxx/SPI/readme.txt | 25 - testhal/SPC563Mxx/ADC/.cproject | 56 - testhal/SPC563Mxx/ADC/.project | 38 - testhal/SPC563Mxx/ADC/Makefile | 168 -- testhal/SPC563Mxx/ADC/adc_cfg.c | 743 ------- testhal/SPC563Mxx/ADC/adc_cfg.h | 38 - testhal/SPC563Mxx/ADC/chconf.h | 531 ----- testhal/SPC563Mxx/ADC/halconf.h | 312 --- testhal/SPC563Mxx/ADC/main.c | 115 - testhal/SPC563Mxx/ADC/mcuconf.h | 122 -- testhal/SPC563Mxx/ADC/readme.txt | 27 - testhal/SPC563Mxx/ICU-PWM/.cproject | 51 - testhal/SPC563Mxx/ICU-PWM/.project | 38 - testhal/SPC563Mxx/ICU-PWM/Makefile | 168 -- testhal/SPC563Mxx/ICU-PWM/chconf.h | 536 ----- testhal/SPC563Mxx/ICU-PWM/halconf.h | 367 ---- testhal/SPC563Mxx/ICU-PWM/main.c | 142 -- testhal/SPC563Mxx/ICU-PWM/mcuconf.h | 100 - testhal/SPC563Mxx/ICU-PWM/readme.txt | 27 - testhal/SPC563Mxx/SPI/.cproject | 51 - testhal/SPC563Mxx/SPI/.project | 38 - testhal/SPC563Mxx/SPI/Makefile | 168 -- testhal/SPC563Mxx/SPI/chconf.h | 531 ----- testhal/SPC563Mxx/SPI/halconf.h | 312 --- testhal/SPC563Mxx/SPI/main.c | 158 -- testhal/SPC563Mxx/SPI/mcuconf.h | 122 -- testhal/SPC563Mxx/SPI/readme.txt | 25 - testhal/SPC564Axx/ICU-PWM/Makefile | 121 -- testhal/SPC564Axx/ICU-PWM/chconf.h | 536 ----- testhal/SPC564Axx/ICU-PWM/halconf.h | 367 ---- testhal/SPC564Axx/ICU-PWM/main.c | 142 -- testhal/SPC564Axx/ICU-PWM/mcuconf.h | 108 - testhal/SPC564Axx/ICU-PWM/readme.txt | 27 - testhal/SPC564Axx/SPI/.cproject | 51 - testhal/SPC564Axx/SPI/.project | 38 - testhal/SPC564Axx/SPI/Makefile | 168 -- testhal/SPC564Axx/SPI/chconf.h | 531 ----- testhal/SPC564Axx/SPI/halconf.h | 312 --- testhal/SPC564Axx/SPI/main.c | 158 -- testhal/SPC564Axx/SPI/mcuconf.h | 139 -- testhal/SPC564Axx/SPI/readme.txt | 25 - testhal/SPC56ELxx/CAN/.cproject | 51 - testhal/SPC56ELxx/CAN/.project | 38 - testhal/SPC56ELxx/CAN/Makefile | 139 -- testhal/SPC56ELxx/CAN/chconf.h | 529 ----- testhal/SPC56ELxx/CAN/halconf.h | 371 ---- testhal/SPC56ELxx/CAN/main.c | 148 -- testhal/SPC56ELxx/CAN/mcuconf.h | 236 -- testhal/SPC56ELxx/CAN/readme.txt | 27 - testhal/SPC56ELxx/PWM-ICU/.cproject | 51 - testhal/SPC56ELxx/PWM-ICU/.project | 38 - testhal/SPC56ELxx/PWM-ICU/Makefile | 167 -- testhal/SPC56ELxx/PWM-ICU/chconf.h | 525 ----- testhal/SPC56ELxx/PWM-ICU/halconf.h | 367 ---- testhal/SPC56ELxx/PWM-ICU/main.c | 139 -- testhal/SPC56ELxx/PWM-ICU/mcuconf.h | 280 --- testhal/SPC56ELxx/PWM-ICU/readme.txt | 27 - testhal/SPC56ELxx/SPI/.cproject | 51 - testhal/SPC56ELxx/SPI/.project | 38 - testhal/SPC56ELxx/SPI/Makefile | 168 -- testhal/SPC56ELxx/SPI/chconf.h | 531 ----- testhal/SPC56ELxx/SPI/halconf.h | 312 --- testhal/SPC56ELxx/SPI/main.c | 157 -- testhal/SPC56ELxx/SPI/mcuconf.h | 280 --- testhal/SPC56ELxx/SPI/readme.txt | 25 - testhal/STM32F0xx/ADC/.cproject | 51 - testhal/STM32F0xx/ADC/.project | 38 - testhal/STM32F0xx/ADC/Makefile | 207 -- testhal/STM32F0xx/ADC/chconf.h | 531 ----- testhal/STM32F0xx/ADC/halconf.h | 312 --- testhal/STM32F0xx/ADC/main.c | 152 -- testhal/STM32F0xx/ADC/mcuconf.h | 147 -- testhal/STM32F0xx/ADC/readme.txt | 31 - testhal/STM32F0xx/EXT/.cproject | 51 - testhal/STM32F0xx/EXT/.project | 38 - testhal/STM32F0xx/EXT/Makefile | 207 -- testhal/STM32F0xx/EXT/chconf.h | 531 ----- testhal/STM32F0xx/EXT/halconf.h | 312 --- testhal/STM32F0xx/EXT/main.c | 99 - testhal/STM32F0xx/EXT/mcuconf.h | 147 -- testhal/STM32F0xx/EXT/readme.txt | 30 - testhal/STM32F0xx/IRQ_STORM/.cproject | 51 - testhal/STM32F0xx/IRQ_STORM/.project | 38 - testhal/STM32F0xx/IRQ_STORM/Makefile | 207 -- testhal/STM32F0xx/IRQ_STORM/chconf.h | 531 ----- testhal/STM32F0xx/IRQ_STORM/halconf.h | 312 --- testhal/STM32F0xx/IRQ_STORM/main.c | 328 --- testhal/STM32F0xx/IRQ_STORM/mcuconf.h | 147 -- testhal/STM32F0xx/IRQ_STORM/readme.txt | 31 - testhal/STM32F0xx/PWM-ICU/.cproject | 51 - testhal/STM32F0xx/PWM-ICU/.project | 38 - testhal/STM32F0xx/PWM-ICU/Makefile | 207 -- testhal/STM32F0xx/PWM-ICU/chconf.h | 531 ----- testhal/STM32F0xx/PWM-ICU/halconf.h | 312 --- testhal/STM32F0xx/PWM-ICU/main.c | 143 -- testhal/STM32F0xx/PWM-ICU/mcuconf.h | 147 -- testhal/STM32F0xx/PWM-ICU/readme.txt | 30 - testhal/STM32F0xx/SPI/.cproject | 51 - testhal/STM32F0xx/SPI/.project | 38 - testhal/STM32F0xx/SPI/Makefile | 207 -- testhal/STM32F0xx/SPI/chconf.h | 531 ----- testhal/STM32F0xx/SPI/halconf.h | 312 --- testhal/STM32F0xx/SPI/main.c | 162 -- testhal/STM32F0xx/SPI/mcuconf.h | 147 -- testhal/STM32F0xx/SPI/readme.txt | 30 - testhal/STM32F0xx/UART/.cproject | 51 - testhal/STM32F0xx/UART/.project | 38 - testhal/STM32F0xx/UART/Makefile | 207 -- testhal/STM32F0xx/UART/chconf.h | 531 ----- testhal/STM32F0xx/UART/halconf.h | 312 --- testhal/STM32F0xx/UART/main.c | 144 -- testhal/STM32F0xx/UART/mcuconf.h | 147 -- testhal/STM32F0xx/UART/readme.txt | 31 - testhal/STM32F1xx/ADC/Makefile | 209 -- testhal/STM32F1xx/ADC/chconf.h | 531 ----- testhal/STM32F1xx/ADC/halconf.h | 312 --- testhal/STM32F1xx/ADC/main.c | 157 -- testhal/STM32F1xx/ADC/mcuconf.h | 199 -- testhal/STM32F1xx/ADC/readme.txt | 26 - testhal/STM32F1xx/CAN/Makefile | 209 -- testhal/STM32F1xx/CAN/chconf.h | 531 ----- testhal/STM32F1xx/CAN/halconf.h | 312 --- testhal/STM32F1xx/CAN/main.c | 111 - testhal/STM32F1xx/CAN/mcuconf.h | 199 -- testhal/STM32F1xx/CAN/readme.txt | 26 - testhal/STM32F1xx/EXT/Makefile | 208 -- testhal/STM32F1xx/EXT/chconf.h | 531 ----- testhal/STM32F1xx/EXT/halconf.h | 312 --- testhal/STM32F1xx/EXT/main.c | 99 - testhal/STM32F1xx/EXT/mcuconf.h | 199 -- testhal/STM32F1xx/EXT/readme.txt | 26 - testhal/STM32F1xx/GPT/Makefile | 209 -- testhal/STM32F1xx/GPT/chconf.h | 531 ----- testhal/STM32F1xx/GPT/halconf.h | 312 --- testhal/STM32F1xx/GPT/main.c | 93 - testhal/STM32F1xx/GPT/mcuconf.h | 199 -- testhal/STM32F1xx/GPT/readme.txt | 26 - testhal/STM32F1xx/I2C/Makefile | 220 -- testhal/STM32F1xx/I2C/chconf.h | 505 ----- testhal/STM32F1xx/I2C/fake.c | 61 - testhal/STM32F1xx/I2C/fake.h | 22 - testhal/STM32F1xx/I2C/halconf.h | 312 --- testhal/STM32F1xx/I2C/i2c_pns.c | 47 - testhal/STM32F1xx/I2C/i2c_pns.h | 24 - testhal/STM32F1xx/I2C/lis3.c | 91 - testhal/STM32F1xx/I2C/lis3.h | 44 - testhal/STM32F1xx/I2C/main.c | 135 -- testhal/STM32F1xx/I2C/mcuconf.h | 199 -- testhal/STM32F1xx/I2C/tmp75.c | 60 - testhal/STM32F1xx/I2C/tmp75.h | 29 - testhal/STM32F1xx/IRQ_STORM/Makefile | 209 -- testhal/STM32F1xx/IRQ_STORM/chconf.h | 531 ----- testhal/STM32F1xx/IRQ_STORM/halconf.h | 312 --- testhal/STM32F1xx/IRQ_STORM/main.c | 326 --- testhal/STM32F1xx/IRQ_STORM/mcuconf.h | 199 -- testhal/STM32F1xx/IRQ_STORM/readme.txt | 31 - testhal/STM32F1xx/PWM-ICU/Makefile | 209 -- testhal/STM32F1xx/PWM-ICU/chconf.h | 531 ----- testhal/STM32F1xx/PWM-ICU/halconf.h | 312 --- testhal/STM32F1xx/PWM-ICU/main.c | 139 -- testhal/STM32F1xx/PWM-ICU/mcuconf.h | 199 -- testhal/STM32F1xx/PWM-ICU/readme.txt | 28 - testhal/STM32F1xx/RTC/Makefile | 211 -- testhal/STM32F1xx/RTC/chconf.h | 505 ----- testhal/STM32F1xx/RTC/halconf.h | 312 --- testhal/STM32F1xx/RTC/main.c | 118 - testhal/STM32F1xx/RTC/mcuconf.h | 199 -- testhal/STM32F1xx/RTC_FATTIME/Makefile | 213 -- testhal/STM32F1xx/RTC_FATTIME/chconf.h | 531 ----- testhal/STM32F1xx/RTC_FATTIME/ffconf.h | 193 -- testhal/STM32F1xx/RTC_FATTIME/halconf.h | 312 --- testhal/STM32F1xx/RTC_FATTIME/main.c | 570 ----- testhal/STM32F1xx/RTC_FATTIME/mcuconf.h | 199 -- testhal/STM32F1xx/RTC_FATTIME/readme.txt | 26 - testhal/STM32F1xx/SDC/Makefile | 212 -- testhal/STM32F1xx/SDC/chconf.h | 531 ----- testhal/STM32F1xx/SDC/halconf.h | 312 --- testhal/STM32F1xx/SDC/main.c | 109 - testhal/STM32F1xx/SDC/mcuconf.h | 199 -- testhal/STM32F1xx/SDC/readme.txt | 26 - testhal/STM32F1xx/SPI/Makefile | 209 -- testhal/STM32F1xx/SPI/chconf.h | 531 ----- testhal/STM32F1xx/SPI/halconf.h | 312 --- testhal/STM32F1xx/SPI/main.c | 134 -- testhal/STM32F1xx/SPI/mcuconf.h | 199 -- testhal/STM32F1xx/SPI/readme.txt | 26 - testhal/STM32F1xx/UART/Makefile | 209 -- testhal/STM32F1xx/UART/chconf.h | 531 ----- testhal/STM32F1xx/UART/halconf.h | 312 --- testhal/STM32F1xx/UART/main.c | 143 -- testhal/STM32F1xx/UART/mcuconf.h | 199 -- testhal/STM32F1xx/UART/readme.txt | 26 - testhal/STM32F1xx/USB_CDC/Makefile | 209 -- testhal/STM32F1xx/USB_CDC/chconf.h | 531 ----- testhal/STM32F1xx/USB_CDC/halconf.h | 312 --- testhal/STM32F1xx/USB_CDC/main.c | 509 ----- testhal/STM32F1xx/USB_CDC/mcuconf.h | 199 -- testhal/STM32F1xx/USB_CDC/readme.txt | 26 - testhal/STM32F1xx/USB_CDC_F107/.cproject | 50 - testhal/STM32F1xx/USB_CDC_F107/.project | 95 - testhal/STM32F1xx/USB_CDC_F107/Makefile | 209 -- testhal/STM32F1xx/USB_CDC_F107/chconf.h | 531 ----- testhal/STM32F1xx/USB_CDC_F107/halconf.h | 312 --- testhal/STM32F1xx/USB_CDC_F107/main.c | 509 ----- testhal/STM32F1xx/USB_CDC_F107/mcuconf.h | 207 -- testhal/STM32F1xx/USB_CDC_F107/readme.txt | 26 - testhal/STM32F1xx/USB_MSC/Makefile | 210 -- testhal/STM32F1xx/USB_MSC/chconf.h | 531 ----- testhal/STM32F1xx/USB_MSC/halconf.h | 312 --- testhal/STM32F1xx/USB_MSC/main.c | 313 --- testhal/STM32F1xx/USB_MSC/mcuconf.h | 199 -- testhal/STM32F30x/ADC/.cproject | 50 - testhal/STM32F30x/ADC/.project | 90 - testhal/STM32F30x/ADC/Makefile | 221 -- testhal/STM32F30x/ADC/chconf.h | 531 ----- testhal/STM32F30x/ADC/halconf.h | 312 --- testhal/STM32F30x/ADC/main.c | 172 -- testhal/STM32F30x/ADC/mcuconf.h | 212 -- testhal/STM32F30x/ADC/readme.txt | 30 - testhal/STM32F30x/ADC_DUAL/.cproject | 50 - testhal/STM32F30x/ADC_DUAL/.project | 90 - testhal/STM32F30x/ADC_DUAL/Makefile | 221 -- testhal/STM32F30x/ADC_DUAL/chconf.h | 531 ----- testhal/STM32F30x/ADC_DUAL/halconf.h | 312 --- testhal/STM32F30x/ADC_DUAL/main.c | 196 -- testhal/STM32F30x/ADC_DUAL/mcuconf.h | 212 -- testhal/STM32F30x/ADC_DUAL/readme.txt | 30 - testhal/STM32F30x/CAN/.cproject | 51 - testhal/STM32F30x/CAN/.project | 90 - testhal/STM32F30x/CAN/Makefile | 221 -- testhal/STM32F30x/CAN/chconf.h | 531 ----- testhal/STM32F30x/CAN/halconf.h | 312 --- testhal/STM32F30x/CAN/main.c | 109 - testhal/STM32F30x/CAN/mcuconf.h | 212 -- testhal/STM32F30x/CAN/readme.txt | 26 - testhal/STM32F30x/EXT/.cproject | 50 - testhal/STM32F30x/EXT/.project | 90 - testhal/STM32F30x/EXT/Makefile | 221 -- testhal/STM32F30x/EXT/chconf.h | 531 ----- testhal/STM32F30x/EXT/halconf.h | 312 --- testhal/STM32F30x/EXT/main.c | 101 - testhal/STM32F30x/EXT/mcuconf.h | 212 -- testhal/STM32F30x/EXT/readme.txt | 30 - testhal/STM32F30x/IRQ_STORM/.cproject | 51 - testhal/STM32F30x/IRQ_STORM/.project | 38 - testhal/STM32F30x/IRQ_STORM/Makefile | 221 -- testhal/STM32F30x/IRQ_STORM/chconf.h | 533 ----- testhal/STM32F30x/IRQ_STORM/halconf.h | 312 --- testhal/STM32F30x/IRQ_STORM/main.c | 331 --- testhal/STM32F30x/IRQ_STORM/mcuconf.h | 212 -- testhal/STM32F30x/IRQ_STORM/readme.txt | 32 - testhal/STM32F30x/PWM-ICU/.cproject | 51 - testhal/STM32F30x/PWM-ICU/.project | 38 - testhal/STM32F30x/PWM-ICU/Makefile | 221 -- testhal/STM32F30x/PWM-ICU/chconf.h | 531 ----- testhal/STM32F30x/PWM-ICU/halconf.h | 312 --- testhal/STM32F30x/PWM-ICU/main.c | 138 -- testhal/STM32F30x/PWM-ICU/mcuconf.h | 212 -- testhal/STM32F30x/PWM-ICU/readme.txt | 30 - testhal/STM32F30x/SPI/.cproject | 51 - testhal/STM32F30x/SPI/.project | 90 - testhal/STM32F30x/SPI/Makefile | 221 -- testhal/STM32F30x/SPI/chconf.h | 531 ----- testhal/STM32F30x/SPI/halconf.h | 312 --- testhal/STM32F30x/SPI/main.c | 162 -- testhal/STM32F30x/SPI/mcuconf.h | 212 -- testhal/STM32F30x/SPI/readme.txt | 30 - testhal/STM32F30x/UART/.cproject | 50 - testhal/STM32F30x/UART/.project | 90 - testhal/STM32F30x/UART/Makefile | 221 -- testhal/STM32F30x/UART/chconf.h | 531 ----- testhal/STM32F30x/UART/halconf.h | 312 --- testhal/STM32F30x/UART/main.c | 144 -- testhal/STM32F30x/UART/mcuconf.h | 212 -- testhal/STM32F30x/UART/readme.txt | 31 - testhal/STM32F30x/USB_CDC/.cproject | 51 - testhal/STM32F30x/USB_CDC/.project | 43 - testhal/STM32F30x/USB_CDC/Makefile | 222 -- testhal/STM32F30x/USB_CDC/chconf.h | 531 ----- testhal/STM32F30x/USB_CDC/halconf.h | 312 --- testhal/STM32F30x/USB_CDC/main.c | 516 ----- testhal/STM32F30x/USB_CDC/mcuconf.h | 212 -- testhal/STM32F30x/USB_CDC/readme.txt | 26 - testhal/STM32F37x/ADC/.cproject | 51 - testhal/STM32F37x/ADC/.project | 38 - testhal/STM32F37x/ADC/Makefile | 220 -- testhal/STM32F37x/ADC/chconf.h | 531 ----- testhal/STM32F37x/ADC/halconf.h | 312 --- testhal/STM32F37x/ADC/main.c | 172 -- testhal/STM32F37x/ADC/mcuconf.h | 209 -- testhal/STM32F37x/ADC/readme.txt | 31 - testhal/STM32F37x/CAN/.cproject | 51 - testhal/STM32F37x/CAN/.project | 38 - testhal/STM32F37x/CAN/Makefile | 221 -- testhal/STM32F37x/CAN/chconf.h | 531 ----- testhal/STM32F37x/CAN/halconf.h | 312 --- testhal/STM32F37x/CAN/main.c | 109 - testhal/STM32F37x/CAN/mcuconf.h | 208 -- testhal/STM32F37x/CAN/readme.txt | 26 - testhal/STM32F37x/EXT/.cproject | 51 - testhal/STM32F37x/EXT/.project | 38 - testhal/STM32F37x/EXT/Makefile | 221 -- testhal/STM32F37x/EXT/chconf.h | 531 ----- testhal/STM32F37x/EXT/halconf.h | 312 --- testhal/STM32F37x/EXT/main.c | 101 - testhal/STM32F37x/EXT/mcuconf.h | 208 -- testhal/STM32F37x/EXT/readme.txt | 30 - testhal/STM32F37x/I2C/.cproject | 51 - testhal/STM32F37x/I2C/.project | 38 - testhal/STM32F37x/I2C/Makefile | 221 -- testhal/STM32F37x/I2C/chconf.h | 531 ----- testhal/STM32F37x/I2C/halconf.h | 312 --- testhal/STM32F37x/I2C/main.c | 110 - testhal/STM32F37x/I2C/mcuconf.h | 208 -- testhal/STM32F37x/I2C/readme.txt | 30 - testhal/STM32F37x/IRQ_STORM/.cproject | 51 - testhal/STM32F37x/IRQ_STORM/.project | 38 - testhal/STM32F37x/IRQ_STORM/Makefile | 221 -- testhal/STM32F37x/IRQ_STORM/chconf.h | 533 ----- testhal/STM32F37x/IRQ_STORM/halconf.h | 312 --- testhal/STM32F37x/IRQ_STORM/main.c | 330 --- testhal/STM32F37x/IRQ_STORM/mcuconf.h | 208 -- testhal/STM32F37x/IRQ_STORM/readme.txt | 31 - testhal/STM32F37x/PWM-ICU/.cproject | 51 - testhal/STM32F37x/PWM-ICU/.project | 38 - testhal/STM32F37x/PWM-ICU/Makefile | 221 -- testhal/STM32F37x/PWM-ICU/chconf.h | 531 ----- testhal/STM32F37x/PWM-ICU/halconf.h | 312 --- testhal/STM32F37x/PWM-ICU/main.c | 136 -- testhal/STM32F37x/PWM-ICU/mcuconf.h | 208 -- testhal/STM32F37x/PWM-ICU/readme.txt | 30 - testhal/STM32F37x/SDADC/.cproject | 51 - testhal/STM32F37x/SDADC/.project | 38 - testhal/STM32F37x/SDADC/Makefile | 221 -- testhal/STM32F37x/SDADC/chconf.h | 531 ----- testhal/STM32F37x/SDADC/halconf.h | 312 --- testhal/STM32F37x/SDADC/main.c | 164 -- testhal/STM32F37x/SDADC/mcuconf.h | 208 -- testhal/STM32F37x/SDADC/readme.txt | 31 - testhal/STM32F37x/SPI/.cproject | 51 - testhal/STM32F37x/SPI/.project | 38 - testhal/STM32F37x/SPI/Makefile | 221 -- testhal/STM32F37x/SPI/chconf.h | 531 ----- testhal/STM32F37x/SPI/halconf.h | 312 --- testhal/STM32F37x/SPI/main.c | 158 -- testhal/STM32F37x/SPI/mcuconf.h | 208 -- testhal/STM32F37x/SPI/readme.txt | 30 - testhal/STM32F37x/UART/.cproject | 51 - testhal/STM32F37x/UART/.project | 38 - testhal/STM32F37x/UART/Makefile | 221 -- testhal/STM32F37x/UART/chconf.h | 531 ----- testhal/STM32F37x/UART/halconf.h | 312 --- testhal/STM32F37x/UART/main.c | 142 -- testhal/STM32F37x/UART/mcuconf.h | 208 -- testhal/STM32F37x/UART/readme.txt | 31 - testhal/STM32F37x/USB_CDC/.cproject | 51 - testhal/STM32F37x/USB_CDC/.project | 43 - testhal/STM32F37x/USB_CDC/Makefile | 223 -- testhal/STM32F37x/USB_CDC/chconf.h | 531 ----- testhal/STM32F37x/USB_CDC/halconf.h | 312 --- testhal/STM32F37x/USB_CDC/main.c | 515 ----- testhal/STM32F37x/USB_CDC/mcuconf.h | 208 -- testhal/STM32F37x/USB_CDC/readme.txt | 26 - testhal/STM32F4xx/ADC/.cproject | 51 - testhal/STM32F4xx/ADC/.project | 38 - testhal/STM32F4xx/ADC/Makefile | 222 -- testhal/STM32F4xx/ADC/chconf.h | 531 ----- testhal/STM32F4xx/ADC/halconf.h | 312 --- testhal/STM32F4xx/ADC/main.c | 160 -- testhal/STM32F4xx/ADC/mcuconf.h | 278 --- testhal/STM32F4xx/ADC/readme.txt | 30 - testhal/STM32F4xx/CAN/.cproject | 51 - testhal/STM32F4xx/CAN/.project | 90 - testhal/STM32F4xx/CAN/Makefile | 221 -- testhal/STM32F4xx/CAN/chconf.h | 531 ----- testhal/STM32F4xx/CAN/halconf.h | 312 --- testhal/STM32F4xx/CAN/main.c | 127 -- testhal/STM32F4xx/CAN/mcuconf.h | 278 --- testhal/STM32F4xx/CAN/readme.txt | 26 - testhal/STM32F4xx/DMA_STORM/.cproject | 51 - testhal/STM32F4xx/DMA_STORM/.project | 38 - testhal/STM32F4xx/DMA_STORM/Makefile | 222 -- testhal/STM32F4xx/DMA_STORM/chconf.h | 531 ----- testhal/STM32F4xx/DMA_STORM/halconf.h | 312 --- testhal/STM32F4xx/DMA_STORM/main.c | 229 -- testhal/STM32F4xx/DMA_STORM/mcuconf.h | 278 --- testhal/STM32F4xx/EXT/.cproject | 51 - testhal/STM32F4xx/EXT/.project | 38 - testhal/STM32F4xx/EXT/Makefile | 222 -- testhal/STM32F4xx/EXT/chconf.h | 531 ----- testhal/STM32F4xx/EXT/halconf.h | 312 --- testhal/STM32F4xx/EXT/main.c | 101 - testhal/STM32F4xx/EXT/mcuconf.h | 278 --- testhal/STM32F4xx/EXT/readme.txt | 30 - testhal/STM32F4xx/GPT/.cproject | 51 - testhal/STM32F4xx/GPT/.project | 38 - testhal/STM32F4xx/GPT/Makefile | 222 -- testhal/STM32F4xx/GPT/chconf.h | 531 ----- testhal/STM32F4xx/GPT/halconf.h | 312 --- testhal/STM32F4xx/GPT/main.c | 94 - testhal/STM32F4xx/GPT/mcuconf.h | 278 --- testhal/STM32F4xx/GPT/readme.txt | 30 - testhal/STM32F4xx/I2C/.cproject | 51 - testhal/STM32F4xx/I2C/.project | 38 - testhal/STM32F4xx/I2C/Makefile | 222 -- testhal/STM32F4xx/I2C/chconf.h | 508 ----- testhal/STM32F4xx/I2C/halconf.h | 312 --- testhal/STM32F4xx/I2C/main.c | 181 -- testhal/STM32F4xx/I2C/mcuconf.h | 278 --- testhal/STM32F4xx/IRQ_STORM/.cproject | 51 - testhal/STM32F4xx/IRQ_STORM/.project | 38 - testhal/STM32F4xx/IRQ_STORM/Makefile | 222 -- testhal/STM32F4xx/IRQ_STORM/chconf.h | 533 ----- testhal/STM32F4xx/IRQ_STORM/halconf.h | 312 --- testhal/STM32F4xx/IRQ_STORM/iar/ch.ewp | 2289 ------------------- testhal/STM32F4xx/IRQ_STORM/iar/ch.eww | 10 - testhal/STM32F4xx/IRQ_STORM/iar/ch.icf | 39 - testhal/STM32F4xx/IRQ_STORM/keil/ch.uvproj | 945 -------- testhal/STM32F4xx/IRQ_STORM/main.c | 327 --- testhal/STM32F4xx/IRQ_STORM/mcuconf.h | 278 --- testhal/STM32F4xx/IRQ_STORM/readme.txt | 31 - testhal/STM32F4xx/IRQ_STORM_FPU/.cproject | 51 - testhal/STM32F4xx/IRQ_STORM_FPU/.project | 38 - testhal/STM32F4xx/IRQ_STORM_FPU/Makefile | 222 -- testhal/STM32F4xx/IRQ_STORM_FPU/chconf.h | 531 ----- testhal/STM32F4xx/IRQ_STORM_FPU/extfunc.c | 23 - testhal/STM32F4xx/IRQ_STORM_FPU/halconf.h | 312 --- testhal/STM32F4xx/IRQ_STORM_FPU/iar/ch.ewp | 2292 -------------------- testhal/STM32F4xx/IRQ_STORM_FPU/iar/ch.eww | 10 - testhal/STM32F4xx/IRQ_STORM_FPU/iar/ch.icf | 39 - testhal/STM32F4xx/IRQ_STORM_FPU/keil/ch.uvproj | 945 -------- testhal/STM32F4xx/IRQ_STORM_FPU/main.c | 300 --- testhal/STM32F4xx/IRQ_STORM_FPU/mcuconf.h | 278 --- testhal/STM32F4xx/IRQ_STORM_FPU/readme.txt | 30 - testhal/STM32F4xx/PWM-ICU/.cproject | 51 - testhal/STM32F4xx/PWM-ICU/.project | 38 - testhal/STM32F4xx/PWM-ICU/Makefile | 222 -- testhal/STM32F4xx/PWM-ICU/chconf.h | 531 ----- testhal/STM32F4xx/PWM-ICU/halconf.h | 312 --- testhal/STM32F4xx/PWM-ICU/main.c | 138 -- testhal/STM32F4xx/PWM-ICU/mcuconf.h | 278 --- testhal/STM32F4xx/PWM-ICU/readme.txt | 30 - testhal/STM32F4xx/RTC/.cproject | 51 - testhal/STM32F4xx/RTC/.project | 38 - testhal/STM32F4xx/RTC/Makefile | 226 -- testhal/STM32F4xx/RTC/chconf.h | 508 ----- testhal/STM32F4xx/RTC/halconf.h | 312 --- testhal/STM32F4xx/RTC/main.c | 239 -- testhal/STM32F4xx/RTC/mcuconf.h | 278 --- testhal/STM32F4xx/RTC_FATTIME/Makefile | 217 -- testhal/STM32F4xx/RTC_FATTIME/chconf.h | 534 ----- testhal/STM32F4xx/RTC_FATTIME/ffconf.h | 193 -- testhal/STM32F4xx/RTC_FATTIME/halconf.h | 319 --- testhal/STM32F4xx/RTC_FATTIME/main.c | 218 -- testhal/STM32F4xx/RTC_FATTIME/mcuconf.h | 278 --- testhal/STM32F4xx/RTC_FATTIME/readme.txt | 27 - testhal/STM32F4xx/SDC/.cproject | 51 - testhal/STM32F4xx/SDC/.project | 43 - testhal/STM32F4xx/SDC/Makefile | 230 -- testhal/STM32F4xx/SDC/chconf.h | 534 ----- testhal/STM32F4xx/SDC/csd.txt | 7 - testhal/STM32F4xx/SDC/ffconf.h | 193 -- testhal/STM32F4xx/SDC/halconf.h | 319 --- testhal/STM32F4xx/SDC/main.c | 382 ---- testhal/STM32F4xx/SDC/mcuconf.h | 278 --- testhal/STM32F4xx/SDC/readme.txt | 26 - testhal/STM32F4xx/SPI/.cproject | 51 - testhal/STM32F4xx/SPI/.project | 38 - testhal/STM32F4xx/SPI/Makefile | 222 -- testhal/STM32F4xx/SPI/chconf.h | 531 ----- testhal/STM32F4xx/SPI/halconf.h | 312 --- testhal/STM32F4xx/SPI/main.c | 138 -- testhal/STM32F4xx/SPI/mcuconf.h | 278 --- testhal/STM32F4xx/SPI/readme.txt | 30 - testhal/STM32F4xx/UART/.cproject | 56 - testhal/STM32F4xx/UART/.project | 38 - testhal/STM32F4xx/UART/Makefile | 222 -- testhal/STM32F4xx/UART/chconf.h | 531 ----- testhal/STM32F4xx/UART/halconf.h | 312 --- testhal/STM32F4xx/UART/main.c | 163 -- testhal/STM32F4xx/UART/mcuconf.h | 278 --- testhal/STM32F4xx/UART/readme.txt | 31 - testhal/STM32F4xx/USB_CDC/.cproject | 51 - testhal/STM32F4xx/USB_CDC/.project | 43 - testhal/STM32F4xx/USB_CDC/Makefile | 223 -- testhal/STM32F4xx/USB_CDC/chconf.h | 531 ----- testhal/STM32F4xx/USB_CDC/halconf.h | 312 --- testhal/STM32F4xx/USB_CDC/main.c | 522 ----- testhal/STM32F4xx/USB_CDC/mcuconf.h | 278 --- testhal/STM32F4xx/USB_CDC/readme.txt | 26 - testhal/STM32L1xx/ADC/.cproject | 51 - testhal/STM32L1xx/ADC/.project | 38 - testhal/STM32L1xx/ADC/Makefile | 207 -- testhal/STM32L1xx/ADC/chconf.h | 531 ----- testhal/STM32L1xx/ADC/halconf.h | 312 --- testhal/STM32L1xx/ADC/main.c | 163 -- testhal/STM32L1xx/ADC/mcuconf.h | 171 -- testhal/STM32L1xx/ADC/readme.txt | 31 - testhal/STM32L1xx/EXT/.cproject | 51 - testhal/STM32L1xx/EXT/.project | 38 - testhal/STM32L1xx/EXT/Makefile | 207 -- testhal/STM32L1xx/EXT/chconf.h | 531 ----- testhal/STM32L1xx/EXT/halconf.h | 312 --- testhal/STM32L1xx/EXT/main.c | 99 - testhal/STM32L1xx/EXT/mcuconf.h | 171 -- testhal/STM32L1xx/EXT/readme.txt | 30 - testhal/STM32L1xx/IRQ_STORM/.cproject | 51 - testhal/STM32L1xx/IRQ_STORM/.project | 38 - testhal/STM32L1xx/IRQ_STORM/Makefile | 207 -- testhal/STM32L1xx/IRQ_STORM/chconf.h | 531 ----- testhal/STM32L1xx/IRQ_STORM/halconf.h | 312 --- testhal/STM32L1xx/IRQ_STORM/main.c | 328 --- testhal/STM32L1xx/IRQ_STORM/mcuconf.h | 171 -- testhal/STM32L1xx/IRQ_STORM/readme.txt | 31 - testhal/STM32L1xx/PWM-ICU/.cproject | 51 - testhal/STM32L1xx/PWM-ICU/.project | 38 - testhal/STM32L1xx/PWM-ICU/Makefile | 207 -- testhal/STM32L1xx/PWM-ICU/chconf.h | 531 ----- testhal/STM32L1xx/PWM-ICU/halconf.h | 312 --- testhal/STM32L1xx/PWM-ICU/main.c | 138 -- testhal/STM32L1xx/PWM-ICU/mcuconf.h | 171 -- testhal/STM32L1xx/PWM-ICU/readme.txt | 31 - testhal/STM32L1xx/SPI/.cproject | 51 - testhal/STM32L1xx/SPI/.project | 38 - testhal/STM32L1xx/SPI/Makefile | 207 -- testhal/STM32L1xx/SPI/chconf.h | 531 ----- testhal/STM32L1xx/SPI/halconf.h | 312 --- testhal/STM32L1xx/SPI/main.c | 137 -- testhal/STM32L1xx/SPI/mcuconf.h | 171 -- testhal/STM32L1xx/SPI/readme.txt | 31 - testhal/STM32L1xx/UART/.cproject | 51 - testhal/STM32L1xx/UART/.project | 38 - testhal/STM32L1xx/UART/Makefile | 207 -- testhal/STM32L1xx/UART/chconf.h | 531 ----- testhal/STM32L1xx/UART/halconf.h | 312 --- testhal/STM32L1xx/UART/main.c | 144 -- testhal/STM32L1xx/UART/mcuconf.h | 171 -- testhal/STM32L1xx/UART/readme.txt | 32 - testhal/STM8S/SPI/ChibiOS-RT.stw | 16 - testhal/STM8S/SPI/cosmic/cosmic.stp | 1947 ----------------- testhal/STM8S/SPI/cosmic/vectors.c | 103 - testhal/STM8S/SPI/demo/chconf.h | 531 ----- testhal/STM8S/SPI/demo/halconf.h | 312 --- testhal/STM8S/SPI/demo/main.c | 87 - testhal/STM8S/SPI/demo/mcuconf.h | 47 - testhal/STM8S/SPI/raisonance/raisonance.stp | 1963 ----------------- testhal/common/testbuild/.cproject | 51 - testhal/common/testbuild/.project | 33 - testhal/common/testbuild/Makefile | 221 -- testhal/common/testbuild/board.h | 40 - testhal/common/testbuild/chconf.h | 531 ----- testhal/common/testbuild/main.c | 29 - 640 files changed, 142617 deletions(-) delete mode 100644 testhal/LPC11xx/EXT/Makefile delete mode 100644 testhal/LPC11xx/EXT/chconf.h delete mode 100644 testhal/LPC11xx/EXT/halconf.h delete mode 100644 testhal/LPC11xx/EXT/main.c delete mode 100644 testhal/LPC11xx/EXT/mcuconf.h delete mode 100644 testhal/LPC11xx/IRQ_STORM/Makefile delete mode 100644 testhal/LPC11xx/IRQ_STORM/chconf.h delete mode 100644 testhal/LPC11xx/IRQ_STORM/halconf.h delete mode 100644 testhal/LPC11xx/IRQ_STORM/main.c delete mode 100644 testhal/LPC11xx/IRQ_STORM/mcuconf.h delete mode 100644 testhal/LPC11xx/IRQ_STORM/readme.txt delete mode 100644 testhal/LPC11xx/PWM/Makefile delete mode 100644 testhal/LPC11xx/PWM/chconf.h delete mode 100644 testhal/LPC11xx/PWM/halconf.h delete mode 100644 testhal/LPC11xx/PWM/main.c delete mode 100644 testhal/LPC11xx/PWM/mcuconf.h delete mode 100644 testhal/LPC122x/EXT/Makefile delete mode 100644 testhal/LPC122x/EXT/chconf.h delete mode 100644 testhal/LPC122x/EXT/halconf.h delete mode 100644 testhal/LPC122x/EXT/main.c delete mode 100644 testhal/LPC122x/EXT/mcuconf.h delete mode 100644 testhal/LPC122x/IRQ_STORM/Makefile delete mode 100644 testhal/LPC122x/IRQ_STORM/chconf.h delete mode 100644 testhal/LPC122x/IRQ_STORM/halconf.h delete mode 100644 testhal/LPC122x/IRQ_STORM/main.c delete mode 100644 testhal/LPC122x/IRQ_STORM/mcuconf.h delete mode 100644 testhal/LPC122x/IRQ_STORM/readme.txt delete mode 100644 testhal/LPC122x/PWM/Makefile delete mode 100644 testhal/LPC122x/PWM/chconf.h delete mode 100644 testhal/LPC122x/PWM/halconf.h delete mode 100644 testhal/LPC122x/PWM/main.c delete mode 100644 testhal/LPC122x/PWM/mcuconf.h delete mode 100644 testhal/LPC122x/RTC/Makefile delete mode 100644 testhal/LPC122x/RTC/chconf.h delete mode 100644 testhal/LPC122x/RTC/halconf.h delete mode 100644 testhal/LPC122x/RTC/main.c delete mode 100644 testhal/LPC122x/RTC/mcuconf.h delete mode 100644 testhal/LPC13xx/IRQ_STORM/Makefile delete mode 100644 testhal/LPC13xx/IRQ_STORM/chconf.h delete mode 100644 testhal/LPC13xx/IRQ_STORM/halconf.h delete mode 100644 testhal/LPC13xx/IRQ_STORM/main.c delete mode 100644 testhal/LPC13xx/IRQ_STORM/mcuconf.h delete mode 100644 testhal/LPC13xx/IRQ_STORM/readme.txt delete mode 100644 testhal/SPC560BCxx/CAN/Makefile delete mode 100644 testhal/SPC560BCxx/CAN/chconf.h delete mode 100644 testhal/SPC560BCxx/CAN/halconf.h delete mode 100644 testhal/SPC560BCxx/CAN/main.c delete mode 100644 testhal/SPC560BCxx/CAN/mcuconf.h delete mode 100644 testhal/SPC560BCxx/CAN/readme.txt delete mode 100644 testhal/SPC560BCxx/ICU-PWM/Makefile delete mode 100644 testhal/SPC560BCxx/ICU-PWM/chconf.h delete mode 100644 testhal/SPC560BCxx/ICU-PWM/halconf.h delete mode 100644 testhal/SPC560BCxx/ICU-PWM/main.c delete mode 100644 testhal/SPC560BCxx/ICU-PWM/mcuconf.h delete mode 100644 testhal/SPC560BCxx/ICU-PWM/readme.txt delete mode 100644 testhal/SPC560Dxx/SPI/.cproject delete mode 100644 testhal/SPC560Dxx/SPI/.project delete mode 100644 testhal/SPC560Dxx/SPI/Makefile delete mode 100644 testhal/SPC560Dxx/SPI/UDE/debug .wsx delete mode 100644 testhal/SPC560Dxx/SPI/UDE/stm_xpc560b_spc560d40_minimodule_debug_jtag.cfg delete mode 100644 testhal/SPC560Dxx/SPI/chconf.h delete mode 100644 testhal/SPC560Dxx/SPI/halconf.h delete mode 100644 testhal/SPC560Dxx/SPI/main.c delete mode 100644 testhal/SPC560Dxx/SPI/mcuconf.h delete mode 100644 testhal/SPC560Dxx/SPI/readme.txt delete mode 100644 testhal/SPC560Pxx/CAN/.cproject delete mode 100644 testhal/SPC560Pxx/CAN/.project delete mode 100644 testhal/SPC560Pxx/CAN/Makefile delete mode 100644 testhal/SPC560Pxx/CAN/chconf.h delete mode 100644 testhal/SPC560Pxx/CAN/halconf.h delete mode 100644 testhal/SPC560Pxx/CAN/main.c delete mode 100644 testhal/SPC560Pxx/CAN/mcuconf.h delete mode 100644 testhal/SPC560Pxx/CAN/readme.txt delete mode 100644 testhal/SPC560Pxx/PWM-ICU/.cproject delete mode 100644 testhal/SPC560Pxx/PWM-ICU/.project delete mode 100644 testhal/SPC560Pxx/PWM-ICU/Makefile delete mode 100644 testhal/SPC560Pxx/PWM-ICU/chconf.h delete mode 100644 testhal/SPC560Pxx/PWM-ICU/halconf.h delete mode 100644 testhal/SPC560Pxx/PWM-ICU/main.c delete mode 100644 testhal/SPC560Pxx/PWM-ICU/mcuconf.h delete mode 100644 testhal/SPC560Pxx/PWM-ICU/readme.txt delete mode 100644 testhal/SPC560Pxx/SPI/.cproject delete mode 100644 testhal/SPC560Pxx/SPI/.project delete mode 100644 testhal/SPC560Pxx/SPI/Makefile delete mode 100644 testhal/SPC560Pxx/SPI/chconf.h delete mode 100644 testhal/SPC560Pxx/SPI/halconf.h delete mode 100644 testhal/SPC560Pxx/SPI/main.c delete mode 100644 testhal/SPC560Pxx/SPI/mcuconf.h delete mode 100644 testhal/SPC560Pxx/SPI/readme.txt delete mode 100644 testhal/SPC563Mxx/ADC/.cproject delete mode 100644 testhal/SPC563Mxx/ADC/.project delete mode 100644 testhal/SPC563Mxx/ADC/Makefile delete mode 100644 testhal/SPC563Mxx/ADC/adc_cfg.c delete mode 100644 testhal/SPC563Mxx/ADC/adc_cfg.h delete mode 100644 testhal/SPC563Mxx/ADC/chconf.h delete mode 100644 testhal/SPC563Mxx/ADC/halconf.h delete mode 100644 testhal/SPC563Mxx/ADC/main.c delete mode 100644 testhal/SPC563Mxx/ADC/mcuconf.h delete mode 100644 testhal/SPC563Mxx/ADC/readme.txt delete mode 100644 testhal/SPC563Mxx/ICU-PWM/.cproject delete mode 100644 testhal/SPC563Mxx/ICU-PWM/.project delete mode 100644 testhal/SPC563Mxx/ICU-PWM/Makefile delete mode 100644 testhal/SPC563Mxx/ICU-PWM/chconf.h delete mode 100644 testhal/SPC563Mxx/ICU-PWM/halconf.h delete mode 100644 testhal/SPC563Mxx/ICU-PWM/main.c delete mode 100644 testhal/SPC563Mxx/ICU-PWM/mcuconf.h delete mode 100644 testhal/SPC563Mxx/ICU-PWM/readme.txt delete mode 100644 testhal/SPC563Mxx/SPI/.cproject delete mode 100644 testhal/SPC563Mxx/SPI/.project delete mode 100644 testhal/SPC563Mxx/SPI/Makefile delete mode 100644 testhal/SPC563Mxx/SPI/chconf.h delete mode 100644 testhal/SPC563Mxx/SPI/halconf.h delete mode 100644 testhal/SPC563Mxx/SPI/main.c delete mode 100644 testhal/SPC563Mxx/SPI/mcuconf.h delete mode 100644 testhal/SPC563Mxx/SPI/readme.txt delete mode 100644 testhal/SPC564Axx/ICU-PWM/Makefile delete mode 100644 testhal/SPC564Axx/ICU-PWM/chconf.h delete mode 100644 testhal/SPC564Axx/ICU-PWM/halconf.h delete mode 100644 testhal/SPC564Axx/ICU-PWM/main.c delete mode 100644 testhal/SPC564Axx/ICU-PWM/mcuconf.h delete mode 100644 testhal/SPC564Axx/ICU-PWM/readme.txt delete mode 100644 testhal/SPC564Axx/SPI/.cproject delete mode 100644 testhal/SPC564Axx/SPI/.project delete mode 100644 testhal/SPC564Axx/SPI/Makefile delete mode 100644 testhal/SPC564Axx/SPI/chconf.h delete mode 100644 testhal/SPC564Axx/SPI/halconf.h delete mode 100644 testhal/SPC564Axx/SPI/main.c delete mode 100644 testhal/SPC564Axx/SPI/mcuconf.h delete mode 100644 testhal/SPC564Axx/SPI/readme.txt delete mode 100644 testhal/SPC56ELxx/CAN/.cproject delete mode 100644 testhal/SPC56ELxx/CAN/.project delete mode 100644 testhal/SPC56ELxx/CAN/Makefile delete mode 100644 testhal/SPC56ELxx/CAN/chconf.h delete mode 100644 testhal/SPC56ELxx/CAN/halconf.h delete mode 100644 testhal/SPC56ELxx/CAN/main.c delete mode 100644 testhal/SPC56ELxx/CAN/mcuconf.h delete mode 100644 testhal/SPC56ELxx/CAN/readme.txt delete mode 100644 testhal/SPC56ELxx/PWM-ICU/.cproject delete mode 100644 testhal/SPC56ELxx/PWM-ICU/.project delete mode 100644 testhal/SPC56ELxx/PWM-ICU/Makefile delete mode 100644 testhal/SPC56ELxx/PWM-ICU/chconf.h delete mode 100644 testhal/SPC56ELxx/PWM-ICU/halconf.h delete mode 100644 testhal/SPC56ELxx/PWM-ICU/main.c delete mode 100644 testhal/SPC56ELxx/PWM-ICU/mcuconf.h delete mode 100644 testhal/SPC56ELxx/PWM-ICU/readme.txt delete mode 100644 testhal/SPC56ELxx/SPI/.cproject delete mode 100644 testhal/SPC56ELxx/SPI/.project delete mode 100644 testhal/SPC56ELxx/SPI/Makefile delete mode 100644 testhal/SPC56ELxx/SPI/chconf.h delete mode 100644 testhal/SPC56ELxx/SPI/halconf.h delete mode 100644 testhal/SPC56ELxx/SPI/main.c delete mode 100644 testhal/SPC56ELxx/SPI/mcuconf.h delete mode 100644 testhal/SPC56ELxx/SPI/readme.txt delete mode 100644 testhal/STM32F0xx/ADC/.cproject delete mode 100644 testhal/STM32F0xx/ADC/.project delete mode 100644 testhal/STM32F0xx/ADC/Makefile delete mode 100644 testhal/STM32F0xx/ADC/chconf.h delete mode 100644 testhal/STM32F0xx/ADC/halconf.h delete mode 100644 testhal/STM32F0xx/ADC/main.c delete mode 100644 testhal/STM32F0xx/ADC/mcuconf.h delete mode 100644 testhal/STM32F0xx/ADC/readme.txt delete mode 100644 testhal/STM32F0xx/EXT/.cproject delete mode 100644 testhal/STM32F0xx/EXT/.project delete mode 100644 testhal/STM32F0xx/EXT/Makefile delete mode 100644 testhal/STM32F0xx/EXT/chconf.h delete mode 100644 testhal/STM32F0xx/EXT/halconf.h delete mode 100644 testhal/STM32F0xx/EXT/main.c delete mode 100644 testhal/STM32F0xx/EXT/mcuconf.h delete mode 100644 testhal/STM32F0xx/EXT/readme.txt delete mode 100644 testhal/STM32F0xx/IRQ_STORM/.cproject delete mode 100644 testhal/STM32F0xx/IRQ_STORM/.project delete mode 100644 testhal/STM32F0xx/IRQ_STORM/Makefile delete mode 100644 testhal/STM32F0xx/IRQ_STORM/chconf.h delete mode 100644 testhal/STM32F0xx/IRQ_STORM/halconf.h delete mode 100644 testhal/STM32F0xx/IRQ_STORM/main.c delete mode 100644 testhal/STM32F0xx/IRQ_STORM/mcuconf.h delete mode 100644 testhal/STM32F0xx/IRQ_STORM/readme.txt delete mode 100644 testhal/STM32F0xx/PWM-ICU/.cproject delete mode 100644 testhal/STM32F0xx/PWM-ICU/.project delete mode 100644 testhal/STM32F0xx/PWM-ICU/Makefile delete mode 100644 testhal/STM32F0xx/PWM-ICU/chconf.h delete mode 100644 testhal/STM32F0xx/PWM-ICU/halconf.h delete mode 100644 testhal/STM32F0xx/PWM-ICU/main.c delete mode 100644 testhal/STM32F0xx/PWM-ICU/mcuconf.h delete mode 100644 testhal/STM32F0xx/PWM-ICU/readme.txt delete mode 100644 testhal/STM32F0xx/SPI/.cproject delete mode 100644 testhal/STM32F0xx/SPI/.project delete mode 100644 testhal/STM32F0xx/SPI/Makefile delete mode 100644 testhal/STM32F0xx/SPI/chconf.h delete mode 100644 testhal/STM32F0xx/SPI/halconf.h delete mode 100644 testhal/STM32F0xx/SPI/main.c delete mode 100644 testhal/STM32F0xx/SPI/mcuconf.h delete mode 100644 testhal/STM32F0xx/SPI/readme.txt delete mode 100644 testhal/STM32F0xx/UART/.cproject delete mode 100644 testhal/STM32F0xx/UART/.project delete mode 100644 testhal/STM32F0xx/UART/Makefile delete mode 100644 testhal/STM32F0xx/UART/chconf.h delete mode 100644 testhal/STM32F0xx/UART/halconf.h delete mode 100644 testhal/STM32F0xx/UART/main.c delete mode 100644 testhal/STM32F0xx/UART/mcuconf.h delete mode 100644 testhal/STM32F0xx/UART/readme.txt delete mode 100644 testhal/STM32F1xx/ADC/Makefile delete mode 100644 testhal/STM32F1xx/ADC/chconf.h delete mode 100644 testhal/STM32F1xx/ADC/halconf.h delete mode 100644 testhal/STM32F1xx/ADC/main.c delete mode 100644 testhal/STM32F1xx/ADC/mcuconf.h delete mode 100644 testhal/STM32F1xx/ADC/readme.txt delete mode 100644 testhal/STM32F1xx/CAN/Makefile delete mode 100644 testhal/STM32F1xx/CAN/chconf.h delete mode 100644 testhal/STM32F1xx/CAN/halconf.h delete mode 100644 testhal/STM32F1xx/CAN/main.c delete mode 100644 testhal/STM32F1xx/CAN/mcuconf.h delete mode 100644 testhal/STM32F1xx/CAN/readme.txt delete mode 100644 testhal/STM32F1xx/EXT/Makefile delete mode 100644 testhal/STM32F1xx/EXT/chconf.h delete mode 100644 testhal/STM32F1xx/EXT/halconf.h delete mode 100644 testhal/STM32F1xx/EXT/main.c delete mode 100644 testhal/STM32F1xx/EXT/mcuconf.h delete mode 100644 testhal/STM32F1xx/EXT/readme.txt delete mode 100644 testhal/STM32F1xx/GPT/Makefile delete mode 100644 testhal/STM32F1xx/GPT/chconf.h delete mode 100644 testhal/STM32F1xx/GPT/halconf.h delete mode 100644 testhal/STM32F1xx/GPT/main.c delete mode 100644 testhal/STM32F1xx/GPT/mcuconf.h delete mode 100644 testhal/STM32F1xx/GPT/readme.txt delete mode 100644 testhal/STM32F1xx/I2C/Makefile delete mode 100644 testhal/STM32F1xx/I2C/chconf.h delete mode 100644 testhal/STM32F1xx/I2C/fake.c delete mode 100644 testhal/STM32F1xx/I2C/fake.h delete mode 100644 testhal/STM32F1xx/I2C/halconf.h delete mode 100644 testhal/STM32F1xx/I2C/i2c_pns.c delete mode 100644 testhal/STM32F1xx/I2C/i2c_pns.h delete mode 100644 testhal/STM32F1xx/I2C/lis3.c delete mode 100644 testhal/STM32F1xx/I2C/lis3.h delete mode 100644 testhal/STM32F1xx/I2C/main.c delete mode 100644 testhal/STM32F1xx/I2C/mcuconf.h delete mode 100644 testhal/STM32F1xx/I2C/tmp75.c delete mode 100644 testhal/STM32F1xx/I2C/tmp75.h delete mode 100644 testhal/STM32F1xx/IRQ_STORM/Makefile delete mode 100644 testhal/STM32F1xx/IRQ_STORM/chconf.h delete mode 100644 testhal/STM32F1xx/IRQ_STORM/halconf.h delete mode 100644 testhal/STM32F1xx/IRQ_STORM/main.c delete mode 100644 testhal/STM32F1xx/IRQ_STORM/mcuconf.h delete mode 100644 testhal/STM32F1xx/IRQ_STORM/readme.txt delete mode 100644 testhal/STM32F1xx/PWM-ICU/Makefile delete mode 100644 testhal/STM32F1xx/PWM-ICU/chconf.h delete mode 100644 testhal/STM32F1xx/PWM-ICU/halconf.h delete mode 100644 testhal/STM32F1xx/PWM-ICU/main.c delete mode 100644 testhal/STM32F1xx/PWM-ICU/mcuconf.h delete mode 100644 testhal/STM32F1xx/PWM-ICU/readme.txt delete mode 100644 testhal/STM32F1xx/RTC/Makefile delete mode 100644 testhal/STM32F1xx/RTC/chconf.h delete mode 100644 testhal/STM32F1xx/RTC/halconf.h delete mode 100644 testhal/STM32F1xx/RTC/main.c delete mode 100644 testhal/STM32F1xx/RTC/mcuconf.h delete mode 100644 testhal/STM32F1xx/RTC_FATTIME/Makefile delete mode 100644 testhal/STM32F1xx/RTC_FATTIME/chconf.h delete mode 100644 testhal/STM32F1xx/RTC_FATTIME/ffconf.h delete mode 100644 testhal/STM32F1xx/RTC_FATTIME/halconf.h delete mode 100644 testhal/STM32F1xx/RTC_FATTIME/main.c delete mode 100644 testhal/STM32F1xx/RTC_FATTIME/mcuconf.h delete mode 100644 testhal/STM32F1xx/RTC_FATTIME/readme.txt delete mode 100644 testhal/STM32F1xx/SDC/Makefile delete mode 100644 testhal/STM32F1xx/SDC/chconf.h delete mode 100644 testhal/STM32F1xx/SDC/halconf.h delete mode 100644 testhal/STM32F1xx/SDC/main.c delete mode 100644 testhal/STM32F1xx/SDC/mcuconf.h delete mode 100644 testhal/STM32F1xx/SDC/readme.txt delete mode 100644 testhal/STM32F1xx/SPI/Makefile delete mode 100644 testhal/STM32F1xx/SPI/chconf.h delete mode 100644 testhal/STM32F1xx/SPI/halconf.h delete mode 100644 testhal/STM32F1xx/SPI/main.c delete mode 100644 testhal/STM32F1xx/SPI/mcuconf.h delete mode 100644 testhal/STM32F1xx/SPI/readme.txt delete mode 100644 testhal/STM32F1xx/UART/Makefile delete mode 100644 testhal/STM32F1xx/UART/chconf.h delete mode 100644 testhal/STM32F1xx/UART/halconf.h delete mode 100644 testhal/STM32F1xx/UART/main.c delete mode 100644 testhal/STM32F1xx/UART/mcuconf.h delete mode 100644 testhal/STM32F1xx/UART/readme.txt delete mode 100644 testhal/STM32F1xx/USB_CDC/Makefile delete mode 100644 testhal/STM32F1xx/USB_CDC/chconf.h delete mode 100644 testhal/STM32F1xx/USB_CDC/halconf.h delete mode 100644 testhal/STM32F1xx/USB_CDC/main.c delete mode 100644 testhal/STM32F1xx/USB_CDC/mcuconf.h delete mode 100644 testhal/STM32F1xx/USB_CDC/readme.txt delete mode 100644 testhal/STM32F1xx/USB_CDC_F107/.cproject delete mode 100644 testhal/STM32F1xx/USB_CDC_F107/.project delete mode 100644 testhal/STM32F1xx/USB_CDC_F107/Makefile delete mode 100644 testhal/STM32F1xx/USB_CDC_F107/chconf.h delete mode 100644 testhal/STM32F1xx/USB_CDC_F107/halconf.h delete mode 100644 testhal/STM32F1xx/USB_CDC_F107/main.c delete mode 100644 testhal/STM32F1xx/USB_CDC_F107/mcuconf.h delete mode 100644 testhal/STM32F1xx/USB_CDC_F107/readme.txt delete mode 100644 testhal/STM32F1xx/USB_MSC/Makefile delete mode 100644 testhal/STM32F1xx/USB_MSC/chconf.h delete mode 100644 testhal/STM32F1xx/USB_MSC/halconf.h delete mode 100644 testhal/STM32F1xx/USB_MSC/main.c delete mode 100644 testhal/STM32F1xx/USB_MSC/mcuconf.h delete mode 100644 testhal/STM32F30x/ADC/.cproject delete mode 100644 testhal/STM32F30x/ADC/.project delete mode 100644 testhal/STM32F30x/ADC/Makefile delete mode 100644 testhal/STM32F30x/ADC/chconf.h delete mode 100644 testhal/STM32F30x/ADC/halconf.h delete mode 100644 testhal/STM32F30x/ADC/main.c delete mode 100644 testhal/STM32F30x/ADC/mcuconf.h delete mode 100644 testhal/STM32F30x/ADC/readme.txt delete mode 100644 testhal/STM32F30x/ADC_DUAL/.cproject delete mode 100644 testhal/STM32F30x/ADC_DUAL/.project delete mode 100644 testhal/STM32F30x/ADC_DUAL/Makefile delete mode 100644 testhal/STM32F30x/ADC_DUAL/chconf.h delete mode 100644 testhal/STM32F30x/ADC_DUAL/halconf.h delete mode 100644 testhal/STM32F30x/ADC_DUAL/main.c delete mode 100644 testhal/STM32F30x/ADC_DUAL/mcuconf.h delete mode 100644 testhal/STM32F30x/ADC_DUAL/readme.txt delete mode 100644 testhal/STM32F30x/CAN/.cproject delete mode 100644 testhal/STM32F30x/CAN/.project delete mode 100644 testhal/STM32F30x/CAN/Makefile delete mode 100644 testhal/STM32F30x/CAN/chconf.h delete mode 100644 testhal/STM32F30x/CAN/halconf.h delete mode 100644 testhal/STM32F30x/CAN/main.c delete mode 100644 testhal/STM32F30x/CAN/mcuconf.h delete mode 100644 testhal/STM32F30x/CAN/readme.txt delete mode 100644 testhal/STM32F30x/EXT/.cproject delete mode 100644 testhal/STM32F30x/EXT/.project delete mode 100644 testhal/STM32F30x/EXT/Makefile delete mode 100644 testhal/STM32F30x/EXT/chconf.h delete mode 100644 testhal/STM32F30x/EXT/halconf.h delete mode 100644 testhal/STM32F30x/EXT/main.c delete mode 100644 testhal/STM32F30x/EXT/mcuconf.h delete mode 100644 testhal/STM32F30x/EXT/readme.txt delete mode 100644 testhal/STM32F30x/IRQ_STORM/.cproject delete mode 100644 testhal/STM32F30x/IRQ_STORM/.project delete mode 100644 testhal/STM32F30x/IRQ_STORM/Makefile delete mode 100644 testhal/STM32F30x/IRQ_STORM/chconf.h delete mode 100644 testhal/STM32F30x/IRQ_STORM/halconf.h delete mode 100644 testhal/STM32F30x/IRQ_STORM/main.c delete mode 100644 testhal/STM32F30x/IRQ_STORM/mcuconf.h delete mode 100644 testhal/STM32F30x/IRQ_STORM/readme.txt delete mode 100644 testhal/STM32F30x/PWM-ICU/.cproject delete mode 100644 testhal/STM32F30x/PWM-ICU/.project delete mode 100644 testhal/STM32F30x/PWM-ICU/Makefile delete mode 100644 testhal/STM32F30x/PWM-ICU/chconf.h delete mode 100644 testhal/STM32F30x/PWM-ICU/halconf.h delete mode 100644 testhal/STM32F30x/PWM-ICU/main.c delete mode 100644 testhal/STM32F30x/PWM-ICU/mcuconf.h delete mode 100644 testhal/STM32F30x/PWM-ICU/readme.txt delete mode 100644 testhal/STM32F30x/SPI/.cproject delete mode 100644 testhal/STM32F30x/SPI/.project delete mode 100644 testhal/STM32F30x/SPI/Makefile delete mode 100644 testhal/STM32F30x/SPI/chconf.h delete mode 100644 testhal/STM32F30x/SPI/halconf.h delete mode 100644 testhal/STM32F30x/SPI/main.c delete mode 100644 testhal/STM32F30x/SPI/mcuconf.h delete mode 100644 testhal/STM32F30x/SPI/readme.txt delete mode 100644 testhal/STM32F30x/UART/.cproject delete mode 100644 testhal/STM32F30x/UART/.project delete mode 100644 testhal/STM32F30x/UART/Makefile delete mode 100644 testhal/STM32F30x/UART/chconf.h delete mode 100644 testhal/STM32F30x/UART/halconf.h delete mode 100644 testhal/STM32F30x/UART/main.c delete mode 100644 testhal/STM32F30x/UART/mcuconf.h delete mode 100644 testhal/STM32F30x/UART/readme.txt delete mode 100644 testhal/STM32F30x/USB_CDC/.cproject delete mode 100644 testhal/STM32F30x/USB_CDC/.project delete mode 100644 testhal/STM32F30x/USB_CDC/Makefile delete mode 100644 testhal/STM32F30x/USB_CDC/chconf.h delete mode 100644 testhal/STM32F30x/USB_CDC/halconf.h delete mode 100644 testhal/STM32F30x/USB_CDC/main.c delete mode 100644 testhal/STM32F30x/USB_CDC/mcuconf.h delete mode 100644 testhal/STM32F30x/USB_CDC/readme.txt delete mode 100644 testhal/STM32F37x/ADC/.cproject delete mode 100644 testhal/STM32F37x/ADC/.project delete mode 100644 testhal/STM32F37x/ADC/Makefile delete mode 100644 testhal/STM32F37x/ADC/chconf.h delete mode 100644 testhal/STM32F37x/ADC/halconf.h delete mode 100644 testhal/STM32F37x/ADC/main.c delete mode 100644 testhal/STM32F37x/ADC/mcuconf.h delete mode 100644 testhal/STM32F37x/ADC/readme.txt delete mode 100644 testhal/STM32F37x/CAN/.cproject delete mode 100644 testhal/STM32F37x/CAN/.project delete mode 100644 testhal/STM32F37x/CAN/Makefile delete mode 100644 testhal/STM32F37x/CAN/chconf.h delete mode 100644 testhal/STM32F37x/CAN/halconf.h delete mode 100644 testhal/STM32F37x/CAN/main.c delete mode 100644 testhal/STM32F37x/CAN/mcuconf.h delete mode 100644 testhal/STM32F37x/CAN/readme.txt delete mode 100644 testhal/STM32F37x/EXT/.cproject delete mode 100644 testhal/STM32F37x/EXT/.project delete mode 100644 testhal/STM32F37x/EXT/Makefile delete mode 100644 testhal/STM32F37x/EXT/chconf.h delete mode 100644 testhal/STM32F37x/EXT/halconf.h delete mode 100644 testhal/STM32F37x/EXT/main.c delete mode 100644 testhal/STM32F37x/EXT/mcuconf.h delete mode 100644 testhal/STM32F37x/EXT/readme.txt delete mode 100644 testhal/STM32F37x/I2C/.cproject delete mode 100644 testhal/STM32F37x/I2C/.project delete mode 100644 testhal/STM32F37x/I2C/Makefile delete mode 100644 testhal/STM32F37x/I2C/chconf.h delete mode 100644 testhal/STM32F37x/I2C/halconf.h delete mode 100644 testhal/STM32F37x/I2C/main.c delete mode 100644 testhal/STM32F37x/I2C/mcuconf.h delete mode 100644 testhal/STM32F37x/I2C/readme.txt delete mode 100644 testhal/STM32F37x/IRQ_STORM/.cproject delete mode 100644 testhal/STM32F37x/IRQ_STORM/.project delete mode 100644 testhal/STM32F37x/IRQ_STORM/Makefile delete mode 100644 testhal/STM32F37x/IRQ_STORM/chconf.h delete mode 100644 testhal/STM32F37x/IRQ_STORM/halconf.h delete mode 100644 testhal/STM32F37x/IRQ_STORM/main.c delete mode 100644 testhal/STM32F37x/IRQ_STORM/mcuconf.h delete mode 100644 testhal/STM32F37x/IRQ_STORM/readme.txt delete mode 100644 testhal/STM32F37x/PWM-ICU/.cproject delete mode 100644 testhal/STM32F37x/PWM-ICU/.project delete mode 100644 testhal/STM32F37x/PWM-ICU/Makefile delete mode 100644 testhal/STM32F37x/PWM-ICU/chconf.h delete mode 100644 testhal/STM32F37x/PWM-ICU/halconf.h delete mode 100644 testhal/STM32F37x/PWM-ICU/main.c delete mode 100644 testhal/STM32F37x/PWM-ICU/mcuconf.h delete mode 100644 testhal/STM32F37x/PWM-ICU/readme.txt delete mode 100644 testhal/STM32F37x/SDADC/.cproject delete mode 100644 testhal/STM32F37x/SDADC/.project delete mode 100644 testhal/STM32F37x/SDADC/Makefile delete mode 100644 testhal/STM32F37x/SDADC/chconf.h delete mode 100644 testhal/STM32F37x/SDADC/halconf.h delete mode 100644 testhal/STM32F37x/SDADC/main.c delete mode 100644 testhal/STM32F37x/SDADC/mcuconf.h delete mode 100644 testhal/STM32F37x/SDADC/readme.txt delete mode 100644 testhal/STM32F37x/SPI/.cproject delete mode 100644 testhal/STM32F37x/SPI/.project delete mode 100644 testhal/STM32F37x/SPI/Makefile delete mode 100644 testhal/STM32F37x/SPI/chconf.h delete mode 100644 testhal/STM32F37x/SPI/halconf.h delete mode 100644 testhal/STM32F37x/SPI/main.c delete mode 100644 testhal/STM32F37x/SPI/mcuconf.h delete mode 100644 testhal/STM32F37x/SPI/readme.txt delete mode 100644 testhal/STM32F37x/UART/.cproject delete mode 100644 testhal/STM32F37x/UART/.project delete mode 100644 testhal/STM32F37x/UART/Makefile delete mode 100644 testhal/STM32F37x/UART/chconf.h delete mode 100644 testhal/STM32F37x/UART/halconf.h delete mode 100644 testhal/STM32F37x/UART/main.c delete mode 100644 testhal/STM32F37x/UART/mcuconf.h delete mode 100644 testhal/STM32F37x/UART/readme.txt delete mode 100644 testhal/STM32F37x/USB_CDC/.cproject delete mode 100644 testhal/STM32F37x/USB_CDC/.project delete mode 100644 testhal/STM32F37x/USB_CDC/Makefile delete mode 100644 testhal/STM32F37x/USB_CDC/chconf.h delete mode 100644 testhal/STM32F37x/USB_CDC/halconf.h delete mode 100644 testhal/STM32F37x/USB_CDC/main.c delete mode 100644 testhal/STM32F37x/USB_CDC/mcuconf.h delete mode 100644 testhal/STM32F37x/USB_CDC/readme.txt delete mode 100644 testhal/STM32F4xx/ADC/.cproject delete mode 100644 testhal/STM32F4xx/ADC/.project delete mode 100644 testhal/STM32F4xx/ADC/Makefile delete mode 100644 testhal/STM32F4xx/ADC/chconf.h delete mode 100644 testhal/STM32F4xx/ADC/halconf.h delete mode 100644 testhal/STM32F4xx/ADC/main.c delete mode 100644 testhal/STM32F4xx/ADC/mcuconf.h delete mode 100644 testhal/STM32F4xx/ADC/readme.txt delete mode 100644 testhal/STM32F4xx/CAN/.cproject delete mode 100644 testhal/STM32F4xx/CAN/.project delete mode 100644 testhal/STM32F4xx/CAN/Makefile delete mode 100644 testhal/STM32F4xx/CAN/chconf.h delete mode 100644 testhal/STM32F4xx/CAN/halconf.h delete mode 100644 testhal/STM32F4xx/CAN/main.c delete mode 100644 testhal/STM32F4xx/CAN/mcuconf.h delete mode 100644 testhal/STM32F4xx/CAN/readme.txt delete mode 100644 testhal/STM32F4xx/DMA_STORM/.cproject delete mode 100644 testhal/STM32F4xx/DMA_STORM/.project delete mode 100644 testhal/STM32F4xx/DMA_STORM/Makefile delete mode 100644 testhal/STM32F4xx/DMA_STORM/chconf.h delete mode 100644 testhal/STM32F4xx/DMA_STORM/halconf.h delete mode 100644 testhal/STM32F4xx/DMA_STORM/main.c delete mode 100644 testhal/STM32F4xx/DMA_STORM/mcuconf.h delete mode 100644 testhal/STM32F4xx/EXT/.cproject delete mode 100644 testhal/STM32F4xx/EXT/.project delete mode 100644 testhal/STM32F4xx/EXT/Makefile delete mode 100644 testhal/STM32F4xx/EXT/chconf.h delete mode 100644 testhal/STM32F4xx/EXT/halconf.h delete mode 100644 testhal/STM32F4xx/EXT/main.c delete mode 100644 testhal/STM32F4xx/EXT/mcuconf.h delete mode 100644 testhal/STM32F4xx/EXT/readme.txt delete mode 100644 testhal/STM32F4xx/GPT/.cproject delete mode 100644 testhal/STM32F4xx/GPT/.project delete mode 100644 testhal/STM32F4xx/GPT/Makefile delete mode 100644 testhal/STM32F4xx/GPT/chconf.h delete mode 100644 testhal/STM32F4xx/GPT/halconf.h delete mode 100644 testhal/STM32F4xx/GPT/main.c delete mode 100644 testhal/STM32F4xx/GPT/mcuconf.h delete mode 100644 testhal/STM32F4xx/GPT/readme.txt delete mode 100644 testhal/STM32F4xx/I2C/.cproject delete mode 100644 testhal/STM32F4xx/I2C/.project delete mode 100644 testhal/STM32F4xx/I2C/Makefile delete mode 100644 testhal/STM32F4xx/I2C/chconf.h delete mode 100644 testhal/STM32F4xx/I2C/halconf.h delete mode 100644 testhal/STM32F4xx/I2C/main.c delete mode 100644 testhal/STM32F4xx/I2C/mcuconf.h delete mode 100644 testhal/STM32F4xx/IRQ_STORM/.cproject delete mode 100644 testhal/STM32F4xx/IRQ_STORM/.project delete mode 100644 testhal/STM32F4xx/IRQ_STORM/Makefile delete mode 100644 testhal/STM32F4xx/IRQ_STORM/chconf.h delete mode 100644 testhal/STM32F4xx/IRQ_STORM/halconf.h delete mode 100644 testhal/STM32F4xx/IRQ_STORM/iar/ch.ewp delete mode 100644 testhal/STM32F4xx/IRQ_STORM/iar/ch.eww delete mode 100644 testhal/STM32F4xx/IRQ_STORM/iar/ch.icf delete mode 100644 testhal/STM32F4xx/IRQ_STORM/keil/ch.uvproj delete mode 100644 testhal/STM32F4xx/IRQ_STORM/main.c delete mode 100644 testhal/STM32F4xx/IRQ_STORM/mcuconf.h delete mode 100644 testhal/STM32F4xx/IRQ_STORM/readme.txt delete mode 100644 testhal/STM32F4xx/IRQ_STORM_FPU/.cproject delete mode 100644 testhal/STM32F4xx/IRQ_STORM_FPU/.project delete mode 100644 testhal/STM32F4xx/IRQ_STORM_FPU/Makefile delete mode 100644 testhal/STM32F4xx/IRQ_STORM_FPU/chconf.h delete mode 100644 testhal/STM32F4xx/IRQ_STORM_FPU/extfunc.c delete mode 100644 testhal/STM32F4xx/IRQ_STORM_FPU/halconf.h delete mode 100644 testhal/STM32F4xx/IRQ_STORM_FPU/iar/ch.ewp delete mode 100644 testhal/STM32F4xx/IRQ_STORM_FPU/iar/ch.eww delete mode 100644 testhal/STM32F4xx/IRQ_STORM_FPU/iar/ch.icf delete mode 100644 testhal/STM32F4xx/IRQ_STORM_FPU/keil/ch.uvproj delete mode 100644 testhal/STM32F4xx/IRQ_STORM_FPU/main.c delete mode 100644 testhal/STM32F4xx/IRQ_STORM_FPU/mcuconf.h delete mode 100644 testhal/STM32F4xx/IRQ_STORM_FPU/readme.txt delete mode 100644 testhal/STM32F4xx/PWM-ICU/.cproject delete mode 100644 testhal/STM32F4xx/PWM-ICU/.project delete mode 100644 testhal/STM32F4xx/PWM-ICU/Makefile delete mode 100644 testhal/STM32F4xx/PWM-ICU/chconf.h delete mode 100644 testhal/STM32F4xx/PWM-ICU/halconf.h delete mode 100644 testhal/STM32F4xx/PWM-ICU/main.c delete mode 100644 testhal/STM32F4xx/PWM-ICU/mcuconf.h delete mode 100644 testhal/STM32F4xx/PWM-ICU/readme.txt delete mode 100644 testhal/STM32F4xx/RTC/.cproject delete mode 100644 testhal/STM32F4xx/RTC/.project delete mode 100644 testhal/STM32F4xx/RTC/Makefile delete mode 100644 testhal/STM32F4xx/RTC/chconf.h delete mode 100644 testhal/STM32F4xx/RTC/halconf.h delete mode 100644 testhal/STM32F4xx/RTC/main.c delete mode 100644 testhal/STM32F4xx/RTC/mcuconf.h delete mode 100644 testhal/STM32F4xx/RTC_FATTIME/Makefile delete mode 100644 testhal/STM32F4xx/RTC_FATTIME/chconf.h delete mode 100644 testhal/STM32F4xx/RTC_FATTIME/ffconf.h delete mode 100644 testhal/STM32F4xx/RTC_FATTIME/halconf.h delete mode 100644 testhal/STM32F4xx/RTC_FATTIME/main.c delete mode 100644 testhal/STM32F4xx/RTC_FATTIME/mcuconf.h delete mode 100644 testhal/STM32F4xx/RTC_FATTIME/readme.txt delete mode 100644 testhal/STM32F4xx/SDC/.cproject delete mode 100644 testhal/STM32F4xx/SDC/.project delete mode 100644 testhal/STM32F4xx/SDC/Makefile delete mode 100644 testhal/STM32F4xx/SDC/chconf.h delete mode 100644 testhal/STM32F4xx/SDC/csd.txt delete mode 100644 testhal/STM32F4xx/SDC/ffconf.h delete mode 100644 testhal/STM32F4xx/SDC/halconf.h delete mode 100644 testhal/STM32F4xx/SDC/main.c delete mode 100644 testhal/STM32F4xx/SDC/mcuconf.h delete mode 100644 testhal/STM32F4xx/SDC/readme.txt delete mode 100644 testhal/STM32F4xx/SPI/.cproject delete mode 100644 testhal/STM32F4xx/SPI/.project delete mode 100644 testhal/STM32F4xx/SPI/Makefile delete mode 100644 testhal/STM32F4xx/SPI/chconf.h delete mode 100644 testhal/STM32F4xx/SPI/halconf.h delete mode 100644 testhal/STM32F4xx/SPI/main.c delete mode 100644 testhal/STM32F4xx/SPI/mcuconf.h delete mode 100644 testhal/STM32F4xx/SPI/readme.txt delete mode 100644 testhal/STM32F4xx/UART/.cproject delete mode 100644 testhal/STM32F4xx/UART/.project delete mode 100644 testhal/STM32F4xx/UART/Makefile delete mode 100644 testhal/STM32F4xx/UART/chconf.h delete mode 100644 testhal/STM32F4xx/UART/halconf.h delete mode 100644 testhal/STM32F4xx/UART/main.c delete mode 100644 testhal/STM32F4xx/UART/mcuconf.h delete mode 100644 testhal/STM32F4xx/UART/readme.txt delete mode 100644 testhal/STM32F4xx/USB_CDC/.cproject delete mode 100644 testhal/STM32F4xx/USB_CDC/.project delete mode 100644 testhal/STM32F4xx/USB_CDC/Makefile delete mode 100644 testhal/STM32F4xx/USB_CDC/chconf.h delete mode 100644 testhal/STM32F4xx/USB_CDC/halconf.h delete mode 100644 testhal/STM32F4xx/USB_CDC/main.c delete mode 100644 testhal/STM32F4xx/USB_CDC/mcuconf.h delete mode 100644 testhal/STM32F4xx/USB_CDC/readme.txt delete mode 100644 testhal/STM32L1xx/ADC/.cproject delete mode 100644 testhal/STM32L1xx/ADC/.project delete mode 100644 testhal/STM32L1xx/ADC/Makefile delete mode 100644 testhal/STM32L1xx/ADC/chconf.h delete mode 100644 testhal/STM32L1xx/ADC/halconf.h delete mode 100644 testhal/STM32L1xx/ADC/main.c delete mode 100644 testhal/STM32L1xx/ADC/mcuconf.h delete mode 100644 testhal/STM32L1xx/ADC/readme.txt delete mode 100644 testhal/STM32L1xx/EXT/.cproject delete mode 100644 testhal/STM32L1xx/EXT/.project delete mode 100644 testhal/STM32L1xx/EXT/Makefile delete mode 100644 testhal/STM32L1xx/EXT/chconf.h delete mode 100644 testhal/STM32L1xx/EXT/halconf.h delete mode 100644 testhal/STM32L1xx/EXT/main.c delete mode 100644 testhal/STM32L1xx/EXT/mcuconf.h delete mode 100644 testhal/STM32L1xx/EXT/readme.txt delete mode 100644 testhal/STM32L1xx/IRQ_STORM/.cproject delete mode 100644 testhal/STM32L1xx/IRQ_STORM/.project delete mode 100644 testhal/STM32L1xx/IRQ_STORM/Makefile delete mode 100644 testhal/STM32L1xx/IRQ_STORM/chconf.h delete mode 100644 testhal/STM32L1xx/IRQ_STORM/halconf.h delete mode 100644 testhal/STM32L1xx/IRQ_STORM/main.c delete mode 100644 testhal/STM32L1xx/IRQ_STORM/mcuconf.h delete mode 100644 testhal/STM32L1xx/IRQ_STORM/readme.txt delete mode 100644 testhal/STM32L1xx/PWM-ICU/.cproject delete mode 100644 testhal/STM32L1xx/PWM-ICU/.project delete mode 100644 testhal/STM32L1xx/PWM-ICU/Makefile delete mode 100644 testhal/STM32L1xx/PWM-ICU/chconf.h delete mode 100644 testhal/STM32L1xx/PWM-ICU/halconf.h delete mode 100644 testhal/STM32L1xx/PWM-ICU/main.c delete mode 100644 testhal/STM32L1xx/PWM-ICU/mcuconf.h delete mode 100644 testhal/STM32L1xx/PWM-ICU/readme.txt delete mode 100644 testhal/STM32L1xx/SPI/.cproject delete mode 100644 testhal/STM32L1xx/SPI/.project delete mode 100644 testhal/STM32L1xx/SPI/Makefile delete mode 100644 testhal/STM32L1xx/SPI/chconf.h delete mode 100644 testhal/STM32L1xx/SPI/halconf.h delete mode 100644 testhal/STM32L1xx/SPI/main.c delete mode 100644 testhal/STM32L1xx/SPI/mcuconf.h delete mode 100644 testhal/STM32L1xx/SPI/readme.txt delete mode 100644 testhal/STM32L1xx/UART/.cproject delete mode 100644 testhal/STM32L1xx/UART/.project delete mode 100644 testhal/STM32L1xx/UART/Makefile delete mode 100644 testhal/STM32L1xx/UART/chconf.h delete mode 100644 testhal/STM32L1xx/UART/halconf.h delete mode 100644 testhal/STM32L1xx/UART/main.c delete mode 100644 testhal/STM32L1xx/UART/mcuconf.h delete mode 100644 testhal/STM32L1xx/UART/readme.txt delete mode 100644 testhal/STM8S/SPI/ChibiOS-RT.stw delete mode 100644 testhal/STM8S/SPI/cosmic/cosmic.stp delete mode 100644 testhal/STM8S/SPI/cosmic/vectors.c delete mode 100644 testhal/STM8S/SPI/demo/chconf.h delete mode 100644 testhal/STM8S/SPI/demo/halconf.h delete mode 100644 testhal/STM8S/SPI/demo/main.c delete mode 100644 testhal/STM8S/SPI/demo/mcuconf.h delete mode 100644 testhal/STM8S/SPI/raisonance/raisonance.stp delete mode 100644 testhal/common/testbuild/.cproject delete mode 100644 testhal/common/testbuild/.project delete mode 100644 testhal/common/testbuild/Makefile delete mode 100644 testhal/common/testbuild/board.h delete mode 100644 testhal/common/testbuild/chconf.h delete mode 100644 testhal/common/testbuild/main.c (limited to 'testhal') diff --git a/testhal/LPC11xx/EXT/Makefile b/testhal/LPC11xx/EXT/Makefile deleted file mode 100644 index 2ad18e131..000000000 --- a/testhal/LPC11xx/EXT/Makefile +++ /dev/null @@ -1,194 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/EA_LPCXPRESSO_11C24/board.mk -include $(CHIBIOS)/os/hal/platforms/LPC11xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/LPC11xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/LPC11C24.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = -DLPC1114 -D__NEWLIB__ - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/LPC11xx/EXT/chconf.h b/testhal/LPC11xx/EXT/chconf.h deleted file mode 100644 index fe07600ff..000000000 --- a/testhal/LPC11xx/EXT/chconf.h +++ /dev/null @@ -1,533 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - LPC11xx EXT driver - Copyright (C) 2013 Marcin Jokel - - Copyright (C) 2013 mike brown - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE FALSE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/LPC11xx/EXT/halconf.h b/testhal/LPC11xx/EXT/halconf.h deleted file mode 100644 index 06b4df2cc..000000000 --- a/testhal/LPC11xx/EXT/halconf.h +++ /dev/null @@ -1,314 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - LPC11xx EXT driver - Copyright (C) 2013 Marcin Jokel - - Copyright (C) 2013 mike brown - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/LPC11xx/EXT/main.c b/testhal/LPC11xx/EXT/main.c deleted file mode 100644 index bb2ef5aa6..000000000 --- a/testhal/LPC11xx/EXT/main.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - EXT haltest - Copyright (C) 2013 Marcin Jokel - - Copyright (C) 2013 mike brown - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void ledoff(void *arg) { - - (void)arg; - palClearPad(GPIO0, GPIO0_LED); -} - -/* Triggered when the button is pressed or released. The LED is set to ON.*/ -static void ext_cb0(EXTDriver *extp, expchannel_t channel) { - static VirtualTimer vt4; - - (void)extp; - (void)channel; - - palSetPad(GPIO0, GPIO0_LED); - chSysLockFromIsr(); - if (chVTIsArmedI(&vt4)) - chVTResetI(&vt4); - - /* LED set to OFF after 200mS.*/ - chVTSetI(&vt4, MS2ST(200), ledoff, NULL); - chSysUnlockFromIsr(); -} - -static const EXTConfig extcfg = { - { - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART, ext_cb0}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL} - } -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the EXT driver 0. - */ - extStart(&EXTD0, &extcfg); - - /* - * Normal main() thread activity, in this demo it enables and disables the - * button EXT channel using 5 seconds intervals. - */ - while (TRUE) { - chThdSleepMilliseconds(5000); - extChannelDisable(&EXTD0, GPIO0_SW_ISP); - chThdSleepMilliseconds(5000); - extChannelEnable(&EXTD0, GPIO0_SW_ISP); - } -} diff --git a/testhal/LPC11xx/EXT/mcuconf.h b/testhal/LPC11xx/EXT/mcuconf.h deleted file mode 100644 index b5493dbb7..000000000 --- a/testhal/LPC11xx/EXT/mcuconf.h +++ /dev/null @@ -1,106 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - LPC11xx EXT driver - Copyright (C) 2013 Marcin Jokel - - Copyright (C) 2013 mike brown - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * LPC1114 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the driver - * is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...highest. - */ - -/* - * HAL driver system settings. - */ -#define LPC11xx_PLLCLK_SOURCE SYSPLLCLKSEL_SYSOSC -#define LPC11xx_SYSPLL_MUL 4 -#define LPC11xx_SYSPLL_DIV 4 -#define LPC11xx_MAINCLK_SOURCE SYSMAINCLKSEL_PLLOUT -#define LPC11xx_SYSABHCLK_DIV 1 - -/* - * GPT driver system settings. - */ -#define LPC11xx_GPT_USE_CT16B0 FALSE -#define LPC11xx_GPT_USE_CT16B1 FALSE -#define LPC11xx_GPT_USE_CT32B0 FALSE -#define LPC11xx_GPT_USE_CT32B1 FALSE -#define LPC11xx_GPT_CT16B0_IRQ_PRIORITY 1 -#define LPC11xx_GPT_CT16B1_IRQ_PRIORITY 3 -#define LPC11xx_GPT_CT32B0_IRQ_PRIORITY 2 -#define LPC11xx_GPT_CT32B1_IRQ_PRIORITY 2 - -/* - * SERIAL driver system settings. - */ -#define LPC11xx_SERIAL_USE_UART0 TRUE -#define LPC11xx_SERIAL_FIFO_PRELOAD 16 -#define LPC11xx_SERIAL_UART0CLKDIV 1 -#define LPC11xx_SERIAL_UART0_IRQ_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define LPC11xx_SPI_USE_SSP0 TRUE -#define LPC11xx_SPI_USE_SSP1 FALSE -#define LPC11xx_SPI_SSP0CLKDIV 1 -#define LPC11xx_SPI_SSP1CLKDIV 1 -#define LPC11xx_SPI_SSP0_IRQ_PRIORITY 1 -#define LPC11xx_SPI_SSP1_IRQ_PRIORITY 1 -#define LPC11xx_SPI_SSP_ERROR_HOOK(spip) chSysHalt() -#define LPC11xx_SPI_SCK0_SELECTOR SCK0_IS_PIO2_11 - -/* - * EXT driver system settings. - */ -#define LPC11xx_EXT_USE_EXT0 TRUE -#define LPC11xx_EXT_USE_EXT1 FALSE -#define LPC11xx_EXT_USE_EXT2 FALSE -#define LPC11xx_EXT_USE_EXT3 FALSE -#define LPC11xx_EXT_EXTI0_IRQ_PRIORITY 3 -#define LPC11xx_EXT_EXTI1_IRQ_PRIORITY 3 -#define LPC11xx_EXT_EXTI2_IRQ_PRIORITY 3 -#define LPC11xx_EXT_EXTI3_IRQ_PRIORITY 3 - -/* - * I2C driver system settings. - */ -#define LPC11xx_I2C_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define LPC11xx_PWM_USE_CT16B0 FALSE -#define LPC11xx_PWM_USE_CT16B1 TRUE -#define LPC11xx_PWM_USE_CT32B0 FALSE -#define LPC11xx_PWM_USE_CT32B1 FALSE -#define LPC11xx_PWM_USE_CT16B0_CH0 FALSE -#define LPC11xx_PWM_USE_CT16B0_CH1 FALSE -#define LPC11xx_PWM_USE_CT16B1_CH0 TRUE -#define LPC11xx_PWM_USE_CT16B1_CH1 TRUE -#define LPC11xx_PWM_USE_CT32B0_CH0 FALSE -#define LPC11xx_PWM_USE_CT32B0_CH1 FALSE -#define LPC11xx_PWM_USE_CT32B1_CH0 FALSE -#define LPC11xx_PWM_USE_CT32B1_CH1 FALSE -#define LPC11xx_PWM_CT16B0_IRQ_PRIORITY 3 -#define LPC11xx_PWM_CT16B1_IRQ_PRIORITY 3 -#define LPC11xx_PWM_CT32B0_IRQ_PRIORITY 3 -#define LPC11xx_PWM_CT32B1_IRQ_PRIORITY 3 diff --git a/testhal/LPC11xx/IRQ_STORM/Makefile b/testhal/LPC11xx/IRQ_STORM/Makefile deleted file mode 100644 index 2dd75ef71..000000000 --- a/testhal/LPC11xx/IRQ_STORM/Makefile +++ /dev/null @@ -1,196 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/EA_LPCXPRESSO_BB_1114/board.mk -include $(CHIBIOS)/os/hal/platforms/LPC11xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/LPC11xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/LPC1114.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - $(CHIBIOS)/os/various/syscalls.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = -DLPC1114 -D__NEWLIB__ - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/LPC11xx/IRQ_STORM/chconf.h b/testhal/LPC11xx/IRQ_STORM/chconf.h deleted file mode 100644 index f943ea80c..000000000 --- a/testhal/LPC11xx/IRQ_STORM/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE FALSE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/LPC11xx/IRQ_STORM/halconf.h b/testhal/LPC11xx/IRQ_STORM/halconf.h deleted file mode 100644 index d91a792b4..000000000 --- a/testhal/LPC11xx/IRQ_STORM/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/LPC11xx/IRQ_STORM/main.c b/testhal/LPC11xx/IRQ_STORM/main.c deleted file mode 100644 index 9930abfb1..000000000 --- a/testhal/LPC11xx/IRQ_STORM/main.c +++ /dev/null @@ -1,324 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include - -#include "ch.h" -#include "hal.h" - -/*===========================================================================*/ -/* Configurable settings. */ -/*===========================================================================*/ - -#ifndef RANDOMIZE -#define RANDOMIZE FALSE -#endif - -#ifndef ITERATIONS -#define ITERATIONS 100 -#endif - -#ifndef NUM_THREADS -#define NUM_THREADS 4 -#endif - -#ifndef MAILBOX_SIZE -#define MAILBOX_SIZE 4 -#endif - -/*===========================================================================*/ -/* Test related code. */ -/*===========================================================================*/ - -#define MSG_SEND_LEFT 0 -#define MSG_SEND_RIGHT 1 - -static bool_t saturated; - -/* - * Mailboxes and buffers. - */ -static Mailbox mb[NUM_THREADS]; -static msg_t b[NUM_THREADS][MAILBOX_SIZE]; - -/* - * Test worker threads. - */ -static WORKING_AREA(waWorkerThread[NUM_THREADS], 128); -static msg_t WorkerThread(void *arg) { - static volatile unsigned x = 0; - static unsigned cnt = 0; - unsigned me = (unsigned)arg; - unsigned target; - unsigned r; - msg_t msg; - - chRegSetThreadName("worker"); - - /* Work loop.*/ - while (TRUE) { - /* Waiting for a message.*/ - chMBFetch(&mb[me], &msg, TIME_INFINITE); - -#if RANDOMIZE - /* Pseudo-random delay.*/ - { - chSysLock(); - r = rand() & 15; - chSysUnlock(); - while (r--) - x++; - } -#else - /* Fixed delay.*/ - { - r = me >> 4; - while (r--) - x++; - } -#endif - - /* Deciding in which direction to re-send the message.*/ - if (msg == MSG_SEND_LEFT) - target = me - 1; - else - target = me + 1; - - if (target < NUM_THREADS) { - /* If this thread is not at the end of a chain re-sending the message, - note this check works because the variable target is unsigned.*/ - msg = chMBPost(&mb[target], msg, TIME_IMMEDIATE); - if (msg != RDY_OK) - saturated = TRUE; - } - else { - /* Provides a visual feedback about the system.*/ - if (++cnt >= 500) { - cnt = 0; - palTogglePad(GPIO0, GPIO0_LED2); - } - } - } -} - -/* - * GPT1 callback. - */ -static void gpt1cb(GPTDriver *gptp) { - msg_t msg; - - (void)gptp; - chSysLockFromIsr(); - msg = chMBPostI(&mb[0], MSG_SEND_RIGHT); - if (msg != RDY_OK) - saturated = TRUE; - chSysUnlockFromIsr(); -} - -/* - * GPT2 callback. - */ -static void gpt2cb(GPTDriver *gptp) { - msg_t msg; - - (void)gptp; - chSysLockFromIsr(); - msg = chMBPostI(&mb[NUM_THREADS - 1], MSG_SEND_LEFT); - if (msg != RDY_OK) - saturated = TRUE; - chSysUnlockFromIsr(); -} - -/* - * GPT1 configuration. - */ -static const GPTConfig gpt1cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt1cb /* Timer callback.*/ -}; - -/* - * GPT2 configuration. - */ -static const GPTConfig gpt2cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt2cb /* Timer callback.*/ -}; - - -/*===========================================================================*/ -/* Generic demo code. */ -/*===========================================================================*/ - -static void print(char *p) { - - while (*p) { - chSequentialStreamPut(&SD1, *p++); - } -} - -static void println(char *p) { - - while (*p) { - chSequentialStreamPut(&SD1, *p++); - } - chSequentialStreamWrite(&SD1, (uint8_t *)"\r\n", 2); -} - -static void printn(uint32_t n) { - char buf[16], *p; - - if (!n) - chSequentialStreamPut(&SD1, '0'); - else { - p = buf; - while (n) - *p++ = (n % 10) + '0', n /= 10; - while (p > buf) - chSequentialStreamPut(&SD1, *--p); - } -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - gptcnt_t interval, threshold, worst; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Prepares the Serial driver 2 and GPT drivers 1 and 2. - */ - sdStart(&SD1, NULL); /* Default is 38400-8-N-1.*/ - gptStart(&GPTD1, &gpt1cfg); - gptStart(&GPTD2, &gpt2cfg); - - /* - * Initializes the mailboxes and creates the worker threads. - */ - for (i = 0; i < NUM_THREADS; i++) { - chMBInit(&mb[i], b[i], MAILBOX_SIZE); - chThdCreateStatic(waWorkerThread[i], sizeof waWorkerThread[i], - NORMALPRIO - 20, WorkerThread, (void *)i); - } - - /* - * Test procedure. - */ - println(""); - println("*** ChibiOS/RT IRQ-STORM long duration test"); - println("***"); - print("*** Kernel: "); - println(CH_KERNEL_VERSION); -#ifdef CH_COMPILER_NAME - print("*** Compiler: "); - println(CH_COMPILER_NAME); -#endif - print("*** Architecture: "); - println(CH_ARCHITECTURE_NAME); -#ifdef CH_CORE_VARIANT_NAME - print("*** Core Variant: "); - println(CH_CORE_VARIANT_NAME); -#endif -#ifdef CH_PORT_INFO - print("*** Port Info: "); - println(CH_PORT_INFO); -#endif -#ifdef PLATFORM_NAME - print("*** Platform: "); - println(PLATFORM_NAME); -#endif -#ifdef BOARD_NAME - print("*** Test Board: "); - println(BOARD_NAME); -#endif - println("***"); - print("*** System Clock: "); - printn(LPC11xx_SYSCLK); - println(""); - print("*** Iterations: "); - printn(ITERATIONS); - println(""); - print("*** Randomize: "); - printn(RANDOMIZE); - println(""); - print("*** Threads: "); - printn(NUM_THREADS); - println(""); - print("*** Mailbox size: "); - printn(MAILBOX_SIZE); - println(""); - - println(""); - worst = 0; - for (i = 1; i <= ITERATIONS; i++){ - print("Iteration "); - printn(i); - println(""); - saturated = FALSE; - threshold = 0; - for (interval = 2000; interval >= 20; interval -= interval / 10) { - gptStartContinuous(&GPTD1, interval - 1); /* Slightly out of phase.*/ - gptStartContinuous(&GPTD2, interval + 1); /* Slightly out of phase.*/ - chThdSleepMilliseconds(1000); - gptStopTimer(&GPTD1); - gptStopTimer(&GPTD2); - if (!saturated) - print("."); - else { - print("#"); - if (threshold == 0) - threshold = interval; - } - } - /* Gives the worker threads a chance to empty the mailboxes before next - cycle.*/ - chThdSleepMilliseconds(20); - println(""); - print("Saturated at "); - printn(threshold); - println(" uS"); - println(""); - if (threshold > worst) - worst = threshold; - } - gptStopTimer(&GPTD1); - gptStopTimer(&GPTD2); - - print("Worst case at "); - printn(worst); - println(" uS"); - println(""); - println("Test Complete"); - - /* - * Normal main() thread activity, nothing in this test. - */ - while (TRUE) { - chThdSleepMilliseconds(5000); - } - return 0; -} diff --git a/testhal/LPC11xx/IRQ_STORM/mcuconf.h b/testhal/LPC11xx/IRQ_STORM/mcuconf.h deleted file mode 100644 index 6db2e6fd2..000000000 --- a/testhal/LPC11xx/IRQ_STORM/mcuconf.h +++ /dev/null @@ -1,79 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * LPC1114 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the driver - * is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...highest. - */ - -/* - * HAL driver system settings. - */ -#define LPC11xx_PLLCLK_SOURCE SYSPLLCLKSEL_SYSOSC -#define LPC11xx_SYSPLL_MUL 4 -#define LPC11xx_SYSPLL_DIV 4 -#define LPC11xx_MAINCLK_SOURCE SYSMAINCLKSEL_PLLOUT -#define LPC11xx_SYSABHCLK_DIV 1 - -/* - * ADC driver system settings. - */ - -/* - * CAN driver system settings. - */ - -/* - * GPT driver system settings. - */ -#define LPC11xx_GPT_USE_CT16B0 TRUE -#define LPC11xx_GPT_USE_CT16B1 TRUE -#define LPC11xx_GPT_USE_CT32B0 TRUE -#define LPC11xx_GPT_USE_CT32B1 TRUE -#define LPC11xx_GPT_CT16B0_IRQ_PRIORITY 1 -#define LPC11xx_GPT_CT16B1_IRQ_PRIORITY 3 -#define LPC11xx_GPT_CT32B0_IRQ_PRIORITY 2 -#define LPC11xx_GPT_CT32B1_IRQ_PRIORITY 2 - -/* - * PWM driver system settings. - */ - -/* - * SERIAL driver system settings. - */ -#define LPC11xx_SERIAL_USE_UART0 TRUE -#define LPC11xx_SERIAL_FIFO_PRELOAD 16 -#define LPC11xx_SERIAL_UART0CLKDIV 1 -#define LPC11xx_SERIAL_UART0_IRQ_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define LPC11xx_SPI_USE_SSP0 TRUE -#define LPC11xx_SPI_USE_SSP1 FALSE -#define LPC11xx_SPI_SSP0CLKDIV 1 -#define LPC11xx_SPI_SSP1CLKDIV 1 -#define LPC11xx_SPI_SSP0_IRQ_PRIORITY 1 -#define LPC11xx_SPI_SSP1_IRQ_PRIORITY 1 -#define LPC11xx_SPI_SSP_ERROR_HOOK(spip) chSysHalt() -#define LPC11xx_SPI_SCK0_SELECTOR SCK0_IS_PIO2_11 diff --git a/testhal/LPC11xx/IRQ_STORM/readme.txt b/testhal/LPC11xx/IRQ_STORM/readme.txt deleted file mode 100644 index aa22b8f39..000000000 --- a/testhal/LPC11xx/IRQ_STORM/readme.txt +++ /dev/null @@ -1,25 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - IRQ-STORM demo for LPC11xx. ** -***************************************************************************** - -** TARGET ** - -The demo will on an LPCXpresso LPC1114 board. - -** The Demo ** - -The application demonstrates the use of the LPC11xx GPT, PAL and Serial drivers -in order to implement a system stress demo. - -** Build Procedure ** - -The demo has been tested using the free LPCXpresso toolchain but also with -Codesourcery and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -NXP and are licensed under a different license. - - http://www.nxp.com diff --git a/testhal/LPC11xx/PWM/Makefile b/testhal/LPC11xx/PWM/Makefile deleted file mode 100644 index 2ad18e131..000000000 --- a/testhal/LPC11xx/PWM/Makefile +++ /dev/null @@ -1,194 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/EA_LPCXPRESSO_11C24/board.mk -include $(CHIBIOS)/os/hal/platforms/LPC11xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/LPC11xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/LPC11C24.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = -DLPC1114 -D__NEWLIB__ - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/LPC11xx/PWM/chconf.h b/testhal/LPC11xx/PWM/chconf.h deleted file mode 100644 index feb364424..000000000 --- a/testhal/LPC11xx/PWM/chconf.h +++ /dev/null @@ -1,532 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - LPC11xx EXT driver - Copyright (C) 2013 Marcin Jokel - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE FALSE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/LPC11xx/PWM/halconf.h b/testhal/LPC11xx/PWM/halconf.h deleted file mode 100644 index 78b61cf6a..000000000 --- a/testhal/LPC11xx/PWM/halconf.h +++ /dev/null @@ -1,314 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - LPC11xx EXT driver - Copyright (C) 2013 Marcin Jokel - - Copyright (C) 2013 mike brown - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/LPC11xx/PWM/main.c b/testhal/LPC11xx/PWM/main.c deleted file mode 100644 index 1ce05966f..000000000 --- a/testhal/LPC11xx/PWM/main.c +++ /dev/null @@ -1,106 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - LPC11xx EXT driver - Copyright (C) 2013 Marcin Jokel - - Copyright (C) 2013 mike brown - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void pwm2pcb(PWMDriver *pwmp) { - - (void)pwmp; - palClearPad(GPIO0, GPIO0_LED); -} - -static void pwm2c0cb(PWMDriver *pwmp) { - - (void)pwmp; - palSetPad(GPIO0, GPIO0_LED); -} - -static PWMConfig pwmcfg = { - 10000, /* 10kHz PWM clock frequency. */ - 1000, /* Initial PWM period 4,8us */ - pwm2pcb, - { - {PWM_OUTPUT_ACTIVE_LOW, pwm2c0cb}, - {PWM_OUTPUT_ACTIVE_LOW, NULL} - } -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes the PWM driver 2. - */ - pwmStart(&PWMD2, &pwmcfg); - chThdSleepMilliseconds(2000); - - /* - * Starts the PWM channel 1 using 75% duty cycle. - */ - pwmEnableChannel(&PWMD2, 0, 250); - pwmEnableChannel(&PWMD2, 1, 250); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 1 to 50% duty cycle. - */ - pwmEnableChannel(&PWMD2, 0, 500); - pwmEnableChannel(&PWMD2, 1, 500); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 75% duty cycle. - */ - pwmEnableChannel(&PWMD2, 0, 250); - pwmEnableChannel(&PWMD2, 1, 250); - chThdSleepMilliseconds(5000); - - /* - * Changes PWM period to half second the duty cycle becomes 50% - * implicitly. - */ - pwmChangePeriod(&PWMD2, 500); - chThdSleepMilliseconds(5000); - - /* - * Disables channel 1. - */ - pwmDisableChannel(&PWMD2, 1); - chThdSleepMilliseconds(5000); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/LPC11xx/PWM/mcuconf.h b/testhal/LPC11xx/PWM/mcuconf.h deleted file mode 100644 index 21f8c6693..000000000 --- a/testhal/LPC11xx/PWM/mcuconf.h +++ /dev/null @@ -1,106 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - LPC11xx EXT driver - Copyright (C) 2013 Marcin Jokel - - Copyright (C) 2013 mike brown - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * LPC1114 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the driver - * is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...highest. - */ - -/* - * HAL driver system settings. - */ -#define LPC11xx_PLLCLK_SOURCE SYSPLLCLKSEL_SYSOSC -#define LPC11xx_SYSPLL_MUL 4 -#define LPC11xx_SYSPLL_DIV 4 -#define LPC11xx_MAINCLK_SOURCE SYSMAINCLKSEL_PLLOUT -#define LPC11xx_SYSABHCLK_DIV 1 - -/* - * GPT driver system settings. - */ -#define LPC11xx_GPT_USE_CT16B0 FALSE -#define LPC11xx_GPT_USE_CT16B1 FALSE -#define LPC11xx_GPT_USE_CT32B0 FALSE -#define LPC11xx_GPT_USE_CT32B1 FALSE -#define LPC11xx_GPT_CT16B0_IRQ_PRIORITY 1 -#define LPC11xx_GPT_CT16B1_IRQ_PRIORITY 3 -#define LPC11xx_GPT_CT32B0_IRQ_PRIORITY 2 -#define LPC11xx_GPT_CT32B1_IRQ_PRIORITY 2 - -/* - * SERIAL driver system settings. - */ -#define LPC11xx_SERIAL_USE_UART0 TRUE -#define LPC11xx_SERIAL_FIFO_PRELOAD 16 -#define LPC11xx_SERIAL_UART0CLKDIV 1 -#define LPC11xx_SERIAL_UART0_IRQ_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define LPC11xx_SPI_USE_SSP0 TRUE -#define LPC11xx_SPI_USE_SSP1 FALSE -#define LPC11xx_SPI_SSP0CLKDIV 1 -#define LPC11xx_SPI_SSP1CLKDIV 1 -#define LPC11xx_SPI_SSP0_IRQ_PRIORITY 1 -#define LPC11xx_SPI_SSP1_IRQ_PRIORITY 1 -#define LPC11xx_SPI_SSP_ERROR_HOOK(spip) chSysHalt() -#define LPC11xx_SPI_SCK0_SELECTOR SCK0_IS_PIO2_11 - -/* - * EXT driver system settings. - */ -#define LPC11xx_EXT_USE_EXT0 FALSE -#define LPC11xx_EXT_USE_EXT1 FALSE -#define LPC11xx_EXT_USE_EXT2 FALSE -#define LPC11xx_EXT_USE_EXT3 FALSE -#define LPC11xx_EXT_EXTI0_IRQ_PRIORITY 3 -#define LPC11xx_EXT_EXTI1_IRQ_PRIORITY 3 -#define LPC11xx_EXT_EXTI2_IRQ_PRIORITY 3 -#define LPC11xx_EXT_EXTI3_IRQ_PRIORITY 3 - -/* - * I2C driver system settings. - */ -#define LPC11xx_I2C_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define LPC11xx_PWM_USE_CT16B0 FALSE -#define LPC11xx_PWM_USE_CT16B1 TRUE -#define LPC11xx_PWM_USE_CT32B0 FALSE -#define LPC11xx_PWM_USE_CT32B1 FALSE -#define LPC11xx_PWM_USE_CT16B0_CH0 FALSE -#define LPC11xx_PWM_USE_CT16B0_CH1 FALSE -#define LPC11xx_PWM_USE_CT16B1_CH0 TRUE -#define LPC11xx_PWM_USE_CT16B1_CH1 TRUE -#define LPC11xx_PWM_USE_CT32B0_CH0 FALSE -#define LPC11xx_PWM_USE_CT32B0_CH1 FALSE -#define LPC11xx_PWM_USE_CT32B1_CH0 FALSE -#define LPC11xx_PWM_USE_CT32B1_CH1 FALSE -#define LPC11xx_PWM_CT16B0_IRQ_PRIORITY 3 -#define LPC11xx_PWM_CT16B1_IRQ_PRIORITY 3 -#define LPC11xx_PWM_CT32B0_IRQ_PRIORITY 3 -#define LPC11xx_PWM_CT32B1_IRQ_PRIORITY 3 diff --git a/testhal/LPC122x/EXT/Makefile b/testhal/LPC122x/EXT/Makefile deleted file mode 100644 index 507fe3f00..000000000 --- a/testhal/LPC122x/EXT/Makefile +++ /dev/null @@ -1,196 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/OLIMEX_LPC-P1227/board.mk -include $(CHIBIOS)/os/hal/platforms/LPC122x/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/LPC122x/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/LPC1227.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - $(CHIBIOS)/os/various/syscalls.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = -DLPC1227 -D__NEWLIB__ - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/LPC122x/EXT/chconf.h b/testhal/LPC122x/EXT/chconf.h deleted file mode 100644 index 04ff997d1..000000000 --- a/testhal/LPC122x/EXT/chconf.h +++ /dev/null @@ -1,532 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - LPC122x EXT driver - Copyright (C) 2013 Marcin Jokel - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE FALSE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/LPC122x/EXT/halconf.h b/testhal/LPC122x/EXT/halconf.h deleted file mode 100644 index 8cb1fcc41..000000000 --- a/testhal/LPC122x/EXT/halconf.h +++ /dev/null @@ -1,313 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - LPC122x EXT driver - Copyright (C) 2013 Marcin Jokel - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/LPC122x/EXT/main.c b/testhal/LPC122x/EXT/main.c deleted file mode 100644 index 76cafce0e..000000000 --- a/testhal/LPC122x/EXT/main.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - LPC122x EXT driver - Copyright (C) 2013 Marcin Jokel - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void led1off(void *arg) { - - (void)arg; - palSetPad(GPIO1, GPIO1_LED1); -} - -/* Triggered when the button is pressed or released. The LED1 is set to ON.*/ -static void ext2cb12(EXTDriver *extp, expchannel_t channel) { - static VirtualTimer vt4; - - (void)extp; - (void)channel; - - palClearPad(GPIO1, GPIO1_LED1); - chSysLockFromIsr(); - if (chVTIsArmedI(&vt4)) - chVTResetI(&vt4); - - /* LED1 set to OFF after 200mS.*/ - chVTSetI(&vt4, MS2ST(200), led1off, NULL); - chSysUnlockFromIsr(); -} - -static const EXTConfig extcfg = { - { - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART, ext2cb12}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL} - } -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the EXT driver 1. - */ - extStart(&EXTD2, &extcfg); - - /* - * Normal main() thread activity, in this demo it enables and disables the - * button EXT channel using 5 seconds intervals. - */ - while (TRUE) { - chThdSleepMilliseconds(5000); - extChannelDisable(&EXTD2, GPIO2_SW_USER1); - chThdSleepMilliseconds(5000); - extChannelEnable(&EXTD2, GPIO2_SW_USER1); - } -} diff --git a/testhal/LPC122x/EXT/mcuconf.h b/testhal/LPC122x/EXT/mcuconf.h deleted file mode 100644 index 608abf226..000000000 --- a/testhal/LPC122x/EXT/mcuconf.h +++ /dev/null @@ -1,124 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - LPC122x EXT driver - Copyright (C) 2013 Marcin Jokel - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * LPC1227 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the driver - * is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...highest. - */ - -/* - * HAL driver system settings. - */ -#define LPC122x_PLLCLK_SOURCE SYSPLLCLKSEL_SYSOSC -#define LPC122x_SYSPLL_MUL 3 -#define LPC122x_SYSPLL_DIV 8 -#define LPC122x_MAINCLK_SOURCE SYSMAINCLKSEL_PLLOUT -#define LPC122x_SYSABHCLK_DIV 1 - -/* - * GPT driver system settings. - */ -#define LPC122x_GPT_USE_CT16B0 TRUE -#define LPC122x_GPT_USE_CT16B1 TRUE -#define LPC122x_GPT_USE_CT32B0 TRUE -#define LPC122x_GPT_USE_CT32B1 TRUE -#define LPC122x_GPT_CT16B0_IRQ_PRIORITY 2 -#define LPC122x_GPT_CT16B1_IRQ_PRIORITY 2 -#define LPC122x_GPT_CT32B0_IRQ_PRIORITY 2 -#define LPC122x_GPT_CT32B1_IRQ_PRIORITY 2 - -/* - * SERIAL driver system settings. - */ -#define LPC122x_SERIAL_USE_UART0 TRUE -#define LPC122x_SERIAL_FIFO_PRELOAD 16 -#define LPC122x_SERIAL_UART0CLKDIV 1 -#define LPC122x_SERIAL_UART0_IRQ_PRIORITY 3 -#define LPC122x_SERIAL_TXD0_SELECTOR TXD0_IS_PIO0_2 -#define LPC122x_SERIAL_RXD0_SELECTOR RXD0_IS_PIO0_1 - -#define LPC122x_SERIAL_USE_UART1 FALSE -#define LPC122x_SERIAL_FIFO_PRELOAD 16 -#define LPC122x_SERIAL_UART1CLKDIV 1 -#define LPC122x_SERIAL_UART1_IRQ_PRIORITY 3 -#define LPC122x_SERIAL_RXD1_SELECTOR RXD1_IS_PIO0_8 -#define LPC122x_SERIAL_TXD1_SELECTOR TXD1_IS_PIO0_9 - -/* - * SPI driver system settings. - */ -#define LPC122x_SPI_USE_SSP0 TRUE -#define LPC122x_SPI_SSP0CLKDIV 1 -#define LPC122x_SPI_SSP0_IRQ_PRIORITY 1 -#define LPC122x_SPI_SSP_ERROR_HOOK(spip) chSysHalt() - -/* - * EXT driver system settings. - */ -#define LPC122x_EXT_USE_EXT0 FALSE -#define LPC122x_EXT_USE_EXT1 FALSE -#define LPC122x_EXT_USE_EXT2 TRUE -#define LPC122x_EXT_EXTI0_IRQ_PRIORITY 3 -#define LPC122x_EXT_EXTI1_IRQ_PRIORITY 3 -#define LPC122x_EXT_EXTI2_IRQ_PRIORITY 3 - -/* - * RTC driver system settings. - */ -#define LPC122x_RTCCLK SYSCFG_RTCCLK_1Hz -#define LPC122x_RTC_CLKDIV 0 -#define LPC122x_RTC_USE_ALARM TRUE -#define LPC122x_RTC_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define LPC122x_PWM_USE_CT16B0 FALSE -#define LPC122x_PWM_USE_CT16B1 TRUE -#define LPC122x_PWM_USE_CT32B0 FALSE -#define LPC122x_PWM_USE_CT32B1 FALSE -#define LPC122x_PWM_USE_CT16B0_CH0 FALSE -#define LPC122x_PWM_USE_CT16B0_CH1 FALSE -#define LPC122x_PWM_USE_CT16B1_CH0 TRUE -#define LPC122x_PWM_USE_CT16B1_CH1 TRUE -#define LPC122x_PWM_USE_CT32B0_CH0 FALSE -#define LPC122x_PWM_USE_CT32B0_CH1 FALSE -#define LPC122x_PWM_USE_CT32B1_CH0 FALSE -#define LPC122x_PWM_USE_CT32B1_CH1 FALSE -#define LPC122x_PWM_CT16B0_IRQ_PRIORITY 3 -#define LPC122x_PWM_CT16B1_IRQ_PRIORITY 3 -#define LPC122x_PWM_CT32B0_IRQ_PRIORITY 3 -#define LPC122x_PWM_CT32B1_IRQ_PRIORITY 3 -#define LPC122x_PWM_CT16B0_CH0_SELECTOR PWM_CT16B0_CH0_IS_PIO0_28 -#define LPC122x_PWM_CT16B0_CH1_SELECTOR PWM_CT16B0_CH1_IS_PIO0_29 -#define LPC122x_PWM_CT16B1_CH0_SELECTOR PWM_CT16B1_CH0_IS_PIO1_5 -#define LPC122x_PWM_CT16B1_CH1_SELECTOR PWM_CT16B1_CH1_IS_PIO1_6 -#define LPC122x_PWM_CT32B0_CH0_SELECTOR PWM_CT32B0_CH0_IS_PIO2_4 -#define LPC122x_PWM_CT32B0_CH1_SELECTOR PWM_CT32B0_CH1_IS_PIO0_2 -#define LPC122x_PWM_CT32B1_CH0_SELECTOR PWM_CT32B1_CH0_IS_PIO0_6 -#define LPC122x_PWM_CT32B1_CH1_SELECTOR PWM_CT32B1_CH1_IS_PIO0_7 - -/* - * I2C driver system settings. - */ -#define LPC122x_I2C_IRQ_PRIORITY 3 diff --git a/testhal/LPC122x/IRQ_STORM/Makefile b/testhal/LPC122x/IRQ_STORM/Makefile deleted file mode 100644 index 507fe3f00..000000000 --- a/testhal/LPC122x/IRQ_STORM/Makefile +++ /dev/null @@ -1,196 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/OLIMEX_LPC-P1227/board.mk -include $(CHIBIOS)/os/hal/platforms/LPC122x/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/LPC122x/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/LPC1227.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - $(CHIBIOS)/os/various/syscalls.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = -DLPC1227 -D__NEWLIB__ - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/LPC122x/IRQ_STORM/chconf.h b/testhal/LPC122x/IRQ_STORM/chconf.h deleted file mode 100644 index 01463a470..000000000 --- a/testhal/LPC122x/IRQ_STORM/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - LPC122x - Copyright (C) 2013 Marcin Jokel - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE FALSE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/LPC122x/IRQ_STORM/halconf.h b/testhal/LPC122x/IRQ_STORM/halconf.h deleted file mode 100644 index 1f2b374a7..000000000 --- a/testhal/LPC122x/IRQ_STORM/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - LPC122x - Copyright (C) 2013 Marcin Jokel - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/LPC122x/IRQ_STORM/main.c b/testhal/LPC122x/IRQ_STORM/main.c deleted file mode 100644 index ac1c51945..000000000 --- a/testhal/LPC122x/IRQ_STORM/main.c +++ /dev/null @@ -1,324 +0,0 @@ -/* - LPC122x - Copyright (C) 2013 Marcin Jokel - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include - -#include "ch.h" -#include "hal.h" - -/*===========================================================================*/ -/* Configurable settings. */ -/*===========================================================================*/ - -#ifndef RANDOMIZE -#define RANDOMIZE FALSE -#endif - -#ifndef ITERATIONS -#define ITERATIONS 100 -#endif - -#ifndef NUM_THREADS -#define NUM_THREADS 4 -#endif - -#ifndef MAILBOX_SIZE -#define MAILBOX_SIZE 4 -#endif - -/*===========================================================================*/ -/* Test related code. */ -/*===========================================================================*/ - -#define MSG_SEND_LEFT 0 -#define MSG_SEND_RIGHT 1 - -static bool_t saturated; - -/* - * Mailboxes and buffers. - */ -static Mailbox mb[NUM_THREADS]; -static msg_t b[NUM_THREADS][MAILBOX_SIZE]; - -/* - * Test worker threads. - */ -static WORKING_AREA(waWorkerThread[NUM_THREADS], 128); -static msg_t WorkerThread(void *arg) { - static volatile unsigned x = 0; - static unsigned cnt = 0; - unsigned me = (unsigned)arg; - unsigned target; - unsigned r; - msg_t msg; - - chRegSetThreadName("worker"); - - /* Work loop.*/ - while (TRUE) { - /* Waiting for a message.*/ - chMBFetch(&mb[me], &msg, TIME_INFINITE); - -#if RANDOMIZE - /* Pseudo-random delay.*/ - { - chSysLock(); - r = rand() & 15; - chSysUnlock(); - while (r--) - x++; - } -#else - /* Fixed delay.*/ - { - r = me >> 4; - while (r--) - x++; - } -#endif - - /* Deciding in which direction to re-send the message.*/ - if (msg == MSG_SEND_LEFT) - target = me - 1; - else - target = me + 1; - - if (target < NUM_THREADS) { - /* If this thread is not at the end of a chain re-sending the message, - note this check works because the variable target is unsigned.*/ - msg = chMBPost(&mb[target], msg, TIME_IMMEDIATE); - if (msg != RDY_OK) - saturated = TRUE; - } - else { - /* Provides a visual feedback about the system.*/ - if (++cnt >= 500) { - cnt = 0; - palTogglePad(GPIO1, GPIO1_LED1); - } - } - } -} - -/* - * GPT1 callback. - */ -static void gpt1cb(GPTDriver *gptp) { - msg_t msg; - - (void)gptp; - chSysLockFromIsr(); - msg = chMBPostI(&mb[0], MSG_SEND_RIGHT); - if (msg != RDY_OK) - saturated = TRUE; - chSysUnlockFromIsr(); -} - -/* - * GPT2 callback. - */ -static void gpt2cb(GPTDriver *gptp) { - msg_t msg; - - (void)gptp; - chSysLockFromIsr(); - msg = chMBPostI(&mb[NUM_THREADS - 1], MSG_SEND_LEFT); - if (msg != RDY_OK) - saturated = TRUE; - chSysUnlockFromIsr(); -} - -/* - * GPT1 configuration. - */ -static const GPTConfig gpt1cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt1cb /* Timer callback.*/ -}; - -/* - * GPT2 configuration. - */ -static const GPTConfig gpt2cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt2cb /* Timer callback.*/ -}; - - -/*===========================================================================*/ -/* Generic demo code. */ -/*===========================================================================*/ - -static void print(char *p) { - - while (*p) { - chSequentialStreamPut(&SD1, *p++); - } -} - -static void println(char *p) { - - while (*p) { - chSequentialStreamPut(&SD1, *p++); - } - chSequentialStreamWrite(&SD1, (uint8_t *)"\r\n", 2); -} - -static void printn(uint32_t n) { - char buf[16], *p; - - if (!n) - chSequentialStreamPut(&SD1, '0'); - else { - p = buf; - while (n) - *p++ = (n % 10) + '0', n /= 10; - while (p > buf) - chSequentialStreamPut(&SD1, *--p); - } -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - gptcnt_t interval, threshold, worst; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Prepares the Serial driver 2 and GPT drivers 1 and 2. - */ - sdStart(&SD1, NULL); /* Default is 38400-8-N-1.*/ - gptStart(&GPTD1, &gpt1cfg); - gptStart(&GPTD2, &gpt2cfg); - - /* - * Initializes the mailboxes and creates the worker threads. - */ - for (i = 0; i < NUM_THREADS; i++) { - chMBInit(&mb[i], b[i], MAILBOX_SIZE); - chThdCreateStatic(waWorkerThread[i], sizeof waWorkerThread[i], - NORMALPRIO - 20, WorkerThread, (void *)i); - } - - /* - * Test procedure. - */ - println(""); - println("*** ChibiOS/RT IRQ-STORM long duration test"); - println("***"); - print("*** Kernel: "); - println(CH_KERNEL_VERSION); -#ifdef CH_COMPILER_NAME - print("*** Compiler: "); - println(CH_COMPILER_NAME); -#endif - print("*** Architecture: "); - println(CH_ARCHITECTURE_NAME); -#ifdef CH_CORE_VARIANT_NAME - print("*** Core Variant: "); - println(CH_CORE_VARIANT_NAME); -#endif -#ifdef CH_PORT_INFO - print("*** Port Info: "); - println(CH_PORT_INFO); -#endif -#ifdef PLATFORM_NAME - print("*** Platform: "); - println(PLATFORM_NAME); -#endif -#ifdef BOARD_NAME - print("*** Test Board: "); - println(BOARD_NAME); -#endif - println("***"); - print("*** System Clock: "); - printn(LPC122x_SYSCLK); - println(""); - print("*** Iterations: "); - printn(ITERATIONS); - println(""); - print("*** Randomize: "); - printn(RANDOMIZE); - println(""); - print("*** Threads: "); - printn(NUM_THREADS); - println(""); - print("*** Mailbox size: "); - printn(MAILBOX_SIZE); - println(""); - - println(""); - worst = 0; - for (i = 1; i <= ITERATIONS; i++){ - print("Iteration "); - printn(i); - println(""); - saturated = FALSE; - threshold = 0; - for (interval = 2000; interval >= 20; interval -= interval / 10) { - gptStartContinuous(&GPTD1, interval - 1); /* Slightly out of phase.*/ - gptStartContinuous(&GPTD2, interval + 1); /* Slightly out of phase.*/ - chThdSleepMilliseconds(1000); - gptStopTimer(&GPTD1); - gptStopTimer(&GPTD2); - if (!saturated) - print("."); - else { - print("#"); - if (threshold == 0) - threshold = interval; - } - } - /* Gives the worker threads a chance to empty the mailboxes before next - cycle.*/ - chThdSleepMilliseconds(20); - println(""); - print("Saturated at "); - printn(threshold); - println(" uS"); - println(""); - if (threshold > worst) - worst = threshold; - } - gptStopTimer(&GPTD1); - gptStopTimer(&GPTD2); - - print("Worst case at "); - printn(worst); - println(" uS"); - println(""); - println("Test Complete"); - - /* - * Normal main() thread activity, nothing in this test. - */ - while (TRUE) { - chThdSleepMilliseconds(5000); - } - return 0; -} diff --git a/testhal/LPC122x/IRQ_STORM/mcuconf.h b/testhal/LPC122x/IRQ_STORM/mcuconf.h deleted file mode 100644 index 4aa37b83c..000000000 --- a/testhal/LPC122x/IRQ_STORM/mcuconf.h +++ /dev/null @@ -1,84 +0,0 @@ -/* - LPC122x - Copyright (C) 2013 Marcin Jokel - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * LPC1227 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the driver - * is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...highest. - */ - -/* - * HAL driver system settings. - */ -#define LPC122x_PLLCLK_SOURCE SYSPLLCLKSEL_SYSOSC -#define LPC122x_SYSPLL_MUL 3 -#define LPC122x_SYSPLL_DIV 8 -#define LPC122x_MAINCLK_SOURCE SYSMAINCLKSEL_PLLOUT -#define LPC122x_SYSABHCLK_DIV 1 - -/* - * ADC driver system settings. - */ - -/* - * CAN driver system settings. - */ - -/* - * GPT driver system settings. - */ -#define LPC122x_GPT_USE_CT16B0 TRUE -#define LPC122x_GPT_USE_CT16B1 TRUE -#define LPC122x_GPT_USE_CT32B0 TRUE -#define LPC122x_GPT_USE_CT32B1 TRUE -#define LPC122x_GPT_CT16B0_IRQ_PRIORITY 1 -#define LPC122x_GPT_CT16B1_IRQ_PRIORITY 3 -#define LPC122x_GPT_CT32B0_IRQ_PRIORITY 2 -#define LPC122x_GPT_CT32B1_IRQ_PRIORITY 2 - -/* - * PWM driver system settings. - */ - -/* - * SERIAL driver system settings. - */ -#define LPC122x_SERIAL_USE_UART0 TRUE -#define LPC122x_SERIAL_FIFO_PRELOAD 16 -#define LPC122x_SERIAL_UART0CLKDIV 1 -#define LPC122x_SERIAL_UART0_IRQ_PRIORITY 3 -#define LPC122x_SERIAL_TXD0_SELECTOR TXD0_IS_PIO0_2 -#define LPC122x_SERIAL_RXD0_SELECTOR RXD0_IS_PIO0_1 - -#define LPC122x_SERIAL_USE_UART1 FALSE -#define LPC122x_SERIAL_FIFO_PRELOAD 16 -#define LPC122x_SERIAL_UART1CLKDIV 1 -#define LPC122x_SERIAL_UART1_IRQ_PRIORITY 3 -#define LPC122x_SERIAL_RXD1_SELECTOR RXD1_IS_PIO0_8 -#define LPC122x_SERIAL_TXD1_SELECTOR TXD1_IS_PIO0_9 - -/* - * SPI driver system settings. - */ -#define LPC122x_SPI_USE_SSP0 TRUE -#define LPC122x_SPI_SSP0CLKDIV 1 -#define LPC122x_SPI_SSP0_IRQ_PRIORITY 1 -#define LPC122x_SPI_SSP_ERROR_HOOK(spip) chSysHalt() diff --git a/testhal/LPC122x/IRQ_STORM/readme.txt b/testhal/LPC122x/IRQ_STORM/readme.txt deleted file mode 100644 index 58f143f05..000000000 --- a/testhal/LPC122x/IRQ_STORM/readme.txt +++ /dev/null @@ -1,25 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - IRQ-STORM demo for LPC122x. ** -***************************************************************************** - -** TARGET ** - -The demo will on an LPCXpresso LPC1114 board. - -** The Demo ** - -The application demonstrates the use of the LPC11xx GPT, PAL and Serial drivers -in order to implement a system stress demo. - -** Build Procedure ** - -The demo has been tested using the free LPCXpresso toolchain but also with -Codesourcery and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -NXP and are licensed under a different license. - - http://www.nxp.com diff --git a/testhal/LPC122x/PWM/Makefile b/testhal/LPC122x/PWM/Makefile deleted file mode 100644 index 16eff2811..000000000 --- a/testhal/LPC122x/PWM/Makefile +++ /dev/null @@ -1,196 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/OLIMEX_LPC-P1227/board.mk -include $(CHIBIOS)/os/hal/platforms/LPC122x/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/LPC122x/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/LPC1227.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - $(CHIBIOS)/os/various/syscalls.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = -DLPC1227 -D__NEWLIB__ - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/LPC122x/PWM/chconf.h b/testhal/LPC122x/PWM/chconf.h deleted file mode 100644 index b5126732f..000000000 --- a/testhal/LPC122x/PWM/chconf.h +++ /dev/null @@ -1,532 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - LPC122x PWM driver - Copyright (C) 2013 Marcin Jokel - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE FALSE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/LPC122x/PWM/halconf.h b/testhal/LPC122x/PWM/halconf.h deleted file mode 100644 index 945da9669..000000000 --- a/testhal/LPC122x/PWM/halconf.h +++ /dev/null @@ -1,313 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - LPC122x PWM driver - Copyright (C) 2013 Marcin Jokel - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/LPC122x/PWM/main.c b/testhal/LPC122x/PWM/main.c deleted file mode 100644 index eb8abb951..000000000 --- a/testhal/LPC122x/PWM/main.c +++ /dev/null @@ -1,96 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - LPC122x PWM driver - Copyright (C) 2013 Marcin Jokel - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void pwm2pcb(PWMDriver *pwmp) { - - (void)pwmp; - palSetPad(GPIO1, GPIO1_LED2); -} - -static void pwm2c0cb(PWMDriver *pwmp) { - - (void)pwmp; - palClearPad(GPIO1, GPIO1_LED2); -} - -static PWMConfig pwmcfg = { - 10000, /* 100kHz PWM clock frequency. */ - 1000, /* PWM 10 Hz */ - pwm2pcb, - { - {PWM_OUTPUT_ACTIVE_LOW, pwm2c0cb}, - {PWM_OUTPUT_ACTIVE_LOW, NULL} - } -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes the PWM driver 2. - */ - pwmStart(&PWMD2, &pwmcfg); - chThdSleepMilliseconds(2000); - - /* - * Starts the PWM channel 1 using 75% duty cycle. - */ - pwmEnableChannel(&PWMD2, 0, 250); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 1 to 50% duty cycle. - */ - pwmEnableChannel(&PWMD2, 0, 500); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 75% duty cycle. - */ - pwmEnableChannel(&PWMD2, 0, 250); - chThdSleepMilliseconds(5000); - - /* - * Changes PWM period to half second the duty cycle becomes 50% - * implicitly. - */ - pwmChangePeriod(&PWMD2, 500); - chThdSleepMilliseconds(5000); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/LPC122x/PWM/mcuconf.h b/testhal/LPC122x/PWM/mcuconf.h deleted file mode 100644 index b4a308c7a..000000000 --- a/testhal/LPC122x/PWM/mcuconf.h +++ /dev/null @@ -1,124 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - LPC122x PWM driver - Copyright (C) 2013 Marcin Jokel - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * LPC1227 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the driver - * is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...highest. - */ - -/* - * HAL driver system settings. - */ -#define LPC122x_PLLCLK_SOURCE SYSPLLCLKSEL_SYSOSC -#define LPC122x_SYSPLL_MUL 3 -#define LPC122x_SYSPLL_DIV 8 -#define LPC122x_MAINCLK_SOURCE SYSMAINCLKSEL_PLLOUT -#define LPC122x_SYSABHCLK_DIV 1 - -/* - * GPT driver system settings. - */ -#define LPC122x_GPT_USE_CT16B0 TRUE -#define LPC122x_GPT_USE_CT16B1 TRUE -#define LPC122x_GPT_USE_CT32B0 TRUE -#define LPC122x_GPT_USE_CT32B1 TRUE -#define LPC122x_GPT_CT16B0_IRQ_PRIORITY 2 -#define LPC122x_GPT_CT16B1_IRQ_PRIORITY 2 -#define LPC122x_GPT_CT32B0_IRQ_PRIORITY 2 -#define LPC122x_GPT_CT32B1_IRQ_PRIORITY 2 - -/* - * SERIAL driver system settings. - */ -#define LPC122x_SERIAL_USE_UART0 TRUE -#define LPC122x_SERIAL_FIFO_PRELOAD 16 -#define LPC122x_SERIAL_UART0CLKDIV 1 -#define LPC122x_SERIAL_UART0_IRQ_PRIORITY 3 -#define LPC122x_SERIAL_TXD0_SELECTOR TXD0_IS_PIO0_2 -#define LPC122x_SERIAL_RXD0_SELECTOR RXD0_IS_PIO0_1 - -#define LPC122x_SERIAL_USE_UART1 FALSE -#define LPC122x_SERIAL_FIFO_PRELOAD 16 -#define LPC122x_SERIAL_UART1CLKDIV 1 -#define LPC122x_SERIAL_UART1_IRQ_PRIORITY 3 -#define LPC122x_SERIAL_RXD1_SELECTOR RXD1_IS_PIO0_8 -#define LPC122x_SERIAL_TXD1_SELECTOR TXD1_IS_PIO0_9 - -/* - * SPI driver system settings. - */ -#define LPC122x_SPI_USE_SSP0 TRUE -#define LPC122x_SPI_SSP0CLKDIV 1 -#define LPC122x_SPI_SSP0_IRQ_PRIORITY 1 -#define LPC122x_SPI_SSP_ERROR_HOOK(spip) chSysHalt() - -/* - * EXT driver system settings. - */ -#define LPC122x_EXT_USE_EXT0 FALSE -#define LPC122x_EXT_USE_EXT1 FALSE -#define LPC122x_EXT_USE_EXT2 TRUE -#define LPC122x_EXT_EXTI0_IRQ_PRIORITY 3 -#define LPC122x_EXT_EXTI1_IRQ_PRIORITY 3 -#define LPC122x_EXT_EXTI2_IRQ_PRIORITY 3 - -/* - * RTC driver system settings. - */ -#define LPC122x_RTCCLK SYSCFG_RTCCLK_1Hz -#define LPC122x_RTC_CLKDIV 0 -#define LPC122x_RTC_USE_ALARM TRUE -#define LPC122x_RTC_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define LPC122x_PWM_USE_CT16B0 FALSE -#define LPC122x_PWM_USE_CT16B1 TRUE -#define LPC122x_PWM_USE_CT32B0 FALSE -#define LPC122x_PWM_USE_CT32B1 FALSE -#define LPC122x_PWM_USE_CT16B0_CH0 FALSE -#define LPC122x_PWM_USE_CT16B0_CH1 FALSE -#define LPC122x_PWM_USE_CT16B1_CH0 TRUE -#define LPC122x_PWM_USE_CT16B1_CH1 TRUE -#define LPC122x_PWM_USE_CT32B0_CH0 FALSE -#define LPC122x_PWM_USE_CT32B0_CH1 FALSE -#define LPC122x_PWM_USE_CT32B1_CH0 FALSE -#define LPC122x_PWM_USE_CT32B1_CH1 FALSE -#define LPC122x_PWM_CT16B0_IRQ_PRIORITY 3 -#define LPC122x_PWM_CT16B1_IRQ_PRIORITY 3 -#define LPC122x_PWM_CT32B0_IRQ_PRIORITY 3 -#define LPC122x_PWM_CT32B1_IRQ_PRIORITY 3 -#define LPC122x_PWM_CT16B0_CH0_SELECTOR PWM_CT16B0_CH0_IS_PIO0_28 -#define LPC122x_PWM_CT16B0_CH1_SELECTOR PWM_CT16B0_CH1_IS_PIO0_29 -#define LPC122x_PWM_CT16B1_CH0_SELECTOR PWM_CT16B1_CH0_IS_PIO2_2 -#define LPC122x_PWM_CT16B1_CH1_SELECTOR PWM_CT16B1_CH1_IS_PIO1_6 -#define LPC122x_PWM_CT32B0_CH0_SELECTOR PWM_CT32B0_CH0_IS_PIO2_4 -#define LPC122x_PWM_CT32B0_CH1_SELECTOR PWM_CT32B0_CH1_IS_PIO0_2 -#define LPC122x_PWM_CT32B1_CH0_SELECTOR PWM_CT32B1_CH0_IS_PIO0_6 -#define LPC122x_PWM_CT32B1_CH1_SELECTOR PWM_CT32B1_CH1_IS_PIO0_7 - -/* - * I2C driver system settings. - */ -#define LPC122x_I2C_IRQ_PRIORITY 3 diff --git a/testhal/LPC122x/RTC/Makefile b/testhal/LPC122x/RTC/Makefile deleted file mode 100644 index 7b0b90b17..000000000 --- a/testhal/LPC122x/RTC/Makefile +++ /dev/null @@ -1,199 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/OLIMEX_LPC-P1227/board.mk -include $(CHIBIOS)/os/hal/platforms/LPC122x/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/LPC122x/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/LPC1227.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - $(CHIBIOS)/os/various/syscalls.c \ - $(CHIBIOS)/os/various/shell.c \ - $(CHIBIOS)/os/various/chprintf.c \ - $(CHIBIOS)/os/various/chrtclib.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = -DLPC122X -D__NEWLIB__ - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/LPC122x/RTC/chconf.h b/testhal/LPC122x/RTC/chconf.h deleted file mode 100644 index 120d2b7d5..000000000 --- a/testhal/LPC122x/RTC/chconf.h +++ /dev/null @@ -1,532 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - LPC122x RTC driver - Copyright (C) 2013 Marcin Jokel - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE FALSE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/LPC122x/RTC/halconf.h b/testhal/LPC122x/RTC/halconf.h deleted file mode 100644 index b9195a6dc..000000000 --- a/testhal/LPC122x/RTC/halconf.h +++ /dev/null @@ -1,313 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - LPC122x RTC driver - Copyright (C) 2013 Marcin Jokel - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC TRUE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/LPC122x/RTC/main.c b/testhal/LPC122x/RTC/main.c deleted file mode 100644 index c9cf9dab0..000000000 --- a/testhal/LPC122x/RTC/main.c +++ /dev/null @@ -1,286 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - LPC122x RTC driver - Copyright (C) 2013 Marcin Jokel - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* -This structure is used to hold the values representing a calendar time. -It contains the following members, with the meanings as shown. - -int tm_sec seconds after minute [0-61] (61 allows for 2 leap-seconds) -int tm_min minutes after hour [0-59] -int tm_hour hours after midnight [0-23] -int tm_mday day of the month [1-31] -int tm_mon month of year [0-11] -int tm_year current year-1900 -int tm_wday days since Sunday [0-6] -int tm_yday days since January 1st [0-365] -int tm_isdst daylight savings indicator (1 = yes, 0 = no, -1 = unknown) -*/ - -#include -#include -#include - -#include "ch.h" -#include "hal.h" - -#include "shell.h" -#include "chprintf.h" -#include "chrtclib.h" - -static RTCAlarm alarmspec; -static time_t unix_time; - -/* libc stub */ -int _getpid(void) {return 1;} -/* libc stub */ -void _exit(int i) {(void)i;} -/* libc stub */ -#include -#undef errno -extern int errno; -int _kill(int pid, int sig) { - (void)pid; - (void)sig; - errno = EINVAL; - return -1; -} - - -/* sleep indicator thread */ -static WORKING_AREA(blinkWA, 128); -static msg_t blink_thd(void *arg){ - (void)arg; - while (TRUE) { - chThdSleepMilliseconds(100); - palTogglePad(GPIO1, GPIO1_LED1); - } - return 0; -} - -static void wakeup_cb(RTCDriver *rtcp, rtcevent_t event) { - - (void)rtcp; - - if (event == RTC_EVENT_ALARM) { - palTogglePad(GPIO1, GPIO1_LED2); - } -} - -/* Wake-up from Deep-sleep mode with rtc alarm (must be set first) */ -static void func_sleep(void) { - - chSysLock(); - - /* Deep sleep-mode configuration */ - LPC_PMU->PCON = 0; /* DPDEN bit set to 0 */ - LPC_SYSCON->PDSLEEPCFG = 0x0000FFBF; /* BOD off, wdt osc on */ - LPC_SYSCON->PDAWAKECFG &= ~(1 << 6); /* WDT osc powered after woke */ - SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk; /* Deep sleep mode */ - - /* WDT osc config and run */ - LPC_SYSCON->PDRUNCFG |= (1 << 6); /* WDT oscillator power-down */ - LPC_SYSCON->WDTOSCCTRL = (0x01 << 5 ) | 0; /* wdt_osc_clk = Fclkana/(2 * (1 + DIVSEL)) */ - LPC_SYSCON->PDRUNCFG &= ~(1 << 6); /* WDT oscillator power-up */ - __NOP(); - - /* Set WDT osc as Main Clock*/ - LPC_SYSCON->MAINCLKSEL = SYSMAINCLKSEL_WDGOSC; - LPC_SYSCON->MAINCLKUEN = 1; /* Really required? */ - LPC_SYSCON->MAINCLKUEN = 0; - LPC_SYSCON->MAINCLKUEN = 1; - while ((LPC_SYSCON->MAINCLKUEN & 1) == 0) /* Wait switch completion. */ - ; - - /* Set RTC start logic */ - LPC_SYSCON->STARTAPRP1 = (1UL << 18); /* Rising edge */ - LPC_SYSCON->STARTERP1 = (1UL << 18); /* Enable Start Logic for RTC interrupt */ - - __WFI(); - - NVIC_SystemReset(); -} - -/* Wake-up from Deep power-down with wake-up pin or rtc alarm (must be set first) */ -static void func_pwrdown(void) { - - chSysLock(); - - LPC_PMU->PCON |= (1UL << 1); /* DPDEN bit set to 1. */ - SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk; /* Deep sleep mode. */ - LPC_SYSCON->PDRUNCFG &= ~((1UL << 1) | 1UL); /* IRC osc powered. */ - - __WFI(); -} - -static void cmd_pwrdown(BaseSequentialStream *chp, int argc, char *argv[]){ - (void)argv; - - if (argc > 0) { - chprintf(chp, "Usage: pwrdown\r\n"); - return; - } - chprintf(chp, "Going to power down.\r\n"); - - chThdSleepMilliseconds(200); - - func_pwrdown(); - -} - -static void cmd_sleep(BaseSequentialStream *chp, int argc, char *argv[]){ - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: sleep\r\n"); - return; - } - chprintf(chp, "Going to sleep.\r\n"); - - chThdSleepMilliseconds(200); - - /* going to anabiosis */ - func_sleep(); -} - -/* - * - */ -static void cmd_alarm(BaseSequentialStream *chp, int argc, char *argv[]){ - - (void)argv; - if (argc < 1) { - goto ERROR; - } - - if ((argc == 1) && (strcmp(argv[0], "get") == 0)){ - rtcGetAlarm(&RTCD1, 0, &alarmspec); - chprintf(chp, "%D%s",alarmspec.tv_sec," - alarm in seconds\r\n"); - return; - } - - if ((argc == 2) && (strcmp(argv[0], "set") == 0)){ - alarmspec.tv_sec = (uint32_t)atol(argv[1]); - rtcSetAlarm(&RTCD1, 0, &alarmspec); - rtcSetCallback(&RTCD1, wakeup_cb); - return; - } - else{ - goto ERROR; - } - -ERROR: - chprintf(chp, "Usage: alarm get\r\n"); - chprintf(chp, " alarm set N\r\n"); - chprintf(chp, "where N is alarm time in seconds\r\n"); -} - -/* - * - */ -static void cmd_date(BaseSequentialStream *chp, int argc, char *argv[]){ - (void)argv; - struct tm timp; - - if (argc == 0) { - goto ERROR; - } - - if ((argc == 1) && (strcmp(argv[0], "get") == 0)){ - unix_time = rtcGetTimeUnixSec(&RTCD1); - - if (unix_time == -1){ - chprintf(chp, "incorrect time in RTC cell\r\n"); - } - else{ - chprintf(chp, "%D%s",unix_time," - unix time\r\n"); - rtcGetTimeTm(&RTCD1, &timp); - chprintf(chp, "%s%s",asctime(&timp)," - formatted time string\r\n"); - } - return; - } - - if ((argc == 2) && (strcmp(argv[0], "set") == 0)){ - unix_time = atol(argv[1]); - if (unix_time > 0){ - rtcSetTimeUnixSec(&RTCD1, unix_time); - return; - } - else{ - goto ERROR; - } - } - else{ - goto ERROR; - } - -ERROR: - chprintf(chp, "Usage: date get\r\n"); - chprintf(chp, " date set N\r\n"); - chprintf(chp, "where N is time in seconds sins Unix epoch\r\n"); - chprintf(chp, "you can get current N value from unix console by the command\r\n"); - chprintf(chp, "%s", "date +\%s\r\n"); - return; -} - -static const ShellCommand commands[] = { - {"alarm", cmd_alarm}, - {"date", cmd_date}, - {"sleep", cmd_sleep}, - {"pwrdown", cmd_pwrdown}, - {NULL, NULL} -}; - -static const ShellConfig shell_cfg1 = { - (BaseSequentialStream *)&SD1, - commands -}; - -BaseSequentialStream * chp1 = (BaseSequentialStream *)&SD1; - -/** - * Main function. - */ -int main(void){ - - halInit(); - chSysInit(); - chThdCreateStatic(blinkWA, sizeof(blinkWA), NORMALPRIO, blink_thd, NULL); - - sdStart(&SD1, NULL); /* Default is 38400-8-N-1.*/ - - if (LPC_PMU->PCON & (1UL << 11)) { - chprintf(chp1, "Woke from Deep power-down\r\n"); - LPC_PMU->PCON |= (1 << 11); - } - - if (LPC_PMU->PCON & (1UL << 8)) { - chprintf(chp1, "Woke from Deep-sleep mode\r\n"); - LPC_PMU->PCON |= (1 << 8); - } - - /* Shell initialization.*/ - shellInit(); - static WORKING_AREA(waShell, 1024); - shellCreateStatic(&shell_cfg1, waShell, sizeof(waShell), NORMALPRIO); - - /* wait until user do not want to test wakeup */ - while (TRUE){ - chThdSleepMilliseconds(200); - } - return 0; -} - - diff --git a/testhal/LPC122x/RTC/mcuconf.h b/testhal/LPC122x/RTC/mcuconf.h deleted file mode 100644 index 16519cb51..000000000 --- a/testhal/LPC122x/RTC/mcuconf.h +++ /dev/null @@ -1,124 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - LPC122x RTC driver - Copyright (C) 2013 Marcin Jokel - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * LPC1227 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the driver - * is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...highest. - */ - -/* - * HAL driver system settings. - */ -#define LPC122x_PLLCLK_SOURCE SYSPLLCLKSEL_SYSOSC -#define LPC122x_SYSPLL_MUL 3 -#define LPC122x_SYSPLL_DIV 8 -#define LPC122x_MAINCLK_SOURCE SYSMAINCLKSEL_PLLOUT -#define LPC122x_SYSABHCLK_DIV 1 - -/* - * GPT driver system settings. - */ -#define LPC122x_GPT_USE_CT16B0 TRUE -#define LPC122x_GPT_USE_CT16B1 TRUE -#define LPC122x_GPT_USE_CT32B0 TRUE -#define LPC122x_GPT_USE_CT32B1 TRUE -#define LPC122x_GPT_CT16B0_IRQ_PRIORITY 1 -#define LPC122x_GPT_CT16B1_IRQ_PRIORITY 3 -#define LPC122x_GPT_CT32B0_IRQ_PRIORITY 2 -#define LPC122x_GPT_CT32B1_IRQ_PRIORITY 2 - -/* - * SERIAL driver system settings. - */ -#define LPC122x_SERIAL_USE_UART0 TRUE -#define LPC122x_SERIAL_FIFO_PRELOAD 16 -#define LPC122x_SERIAL_UART0CLKDIV 1 -#define LPC122x_SERIAL_UART0_IRQ_PRIORITY 3 -#define LPC122x_SERIAL_TXD0_SELECTOR TXD0_IS_PIO0_2 -#define LPC122x_SERIAL_RXD0_SELECTOR RXD0_IS_PIO0_1 - -#define LPC122x_SERIAL_USE_UART1 FALSE -#define LPC122x_SERIAL_FIFO_PRELOAD 16 -#define LPC122x_SERIAL_UART1CLKDIV 1 -#define LPC122x_SERIAL_UART1_IRQ_PRIORITY 3 -#define LPC122x_SERIAL_RXD1_SELECTOR RXD1_IS_PIO0_8 -#define LPC122x_SERIAL_TXD1_SELECTOR TXD1_IS_PIO0_9 - -/* - * SPI driver system settings. - */ -#define LPC122x_SPI_USE_SSP0 TRUE -#define LPC122x_SPI_SSP0CLKDIV 1 -#define LPC122x_SPI_SSP0_IRQ_PRIORITY 1 -#define LPC122x_SPI_SSP_ERROR_HOOK(spip) chSysHalt() - -/* - * EXT driver system settings. - */ -#define LPC122x_EXT_USE_EXT0 FALSE -#define LPC122x_EXT_USE_EXT1 FALSE -#define LPC122x_EXT_USE_EXT2 TRUE -#define LPC122x_EXT_EXTI0_IRQ_PRIORITY 3 -#define LPC122x_EXT_EXTI1_IRQ_PRIORITY 3 -#define LPC122x_EXT_EXTI2_IRQ_PRIORITY 3 - -/* - * RTC driver system settings. - */ -#define LPC122x_RTCCLK SYSCFG_RTCCLK_1Hz -#define LPC122x_RTC_CLKDIV 0 -#define LPC122x_RTC_USE_ALARM TRUE -#define LPC122x_RTC_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define LPC122x_PWM_USE_CT16B0 FALSE -#define LPC122x_PWM_USE_CT16B1 TRUE -#define LPC122x_PWM_USE_CT32B0 FALSE -#define LPC122x_PWM_USE_CT32B1 FALSE -#define LPC122x_PWM_USE_CT16B0_CH0 FALSE -#define LPC122x_PWM_USE_CT16B0_CH1 FALSE -#define LPC122x_PWM_USE_CT16B1_CH0 TRUE -#define LPC122x_PWM_USE_CT16B1_CH1 TRUE -#define LPC122x_PWM_USE_CT32B0_CH0 FALSE -#define LPC122x_PWM_USE_CT32B0_CH1 FALSE -#define LPC122x_PWM_USE_CT32B1_CH0 FALSE -#define LPC122x_PWM_USE_CT32B1_CH1 FALSE -#define LPC122x_PWM_CT16B0_IRQ_PRIORITY 3 -#define LPC122x_PWM_CT16B1_IRQ_PRIORITY 3 -#define LPC122x_PWM_CT32B0_IRQ_PRIORITY 3 -#define LPC122x_PWM_CT32B1_IRQ_PRIORITY 3 -#define LPC122x_PWM_CT16B0_CH0_SELECTOR PWM_CT16B0_CH0_IS_PIO0_28 -#define LPC122x_PWM_CT16B0_CH1_SELECTOR PWM_CT16B0_CH1_IS_PIO0_29 -#define LPC122x_PWM_CT16B1_CH0_SELECTOR PWM_CT16B1_CH0_IS_PIO1_5 -#define LPC122x_PWM_CT16B1_CH1_SELECTOR PWM_CT16B1_CH1_IS_PIO1_6 -#define LPC122x_PWM_CT32B0_CH0_SELECTOR PWM_CT32B0_CH0_IS_PIO2_4 -#define LPC122x_PWM_CT32B0_CH1_SELECTOR PWM_CT32B0_CH1_IS_PIO0_2 -#define LPC122x_PWM_CT32B1_CH0_SELECTOR PWM_CT32B1_CH0_IS_PIO0_6 -#define LPC122x_PWM_CT32B1_CH1_SELECTOR PWM_CT32B1_CH1_IS_PIO0_7 - -/* - * I2C driver system settings. - */ -#define LPC122x_I2C_IRQ_PRIORITY 3 diff --git a/testhal/LPC13xx/IRQ_STORM/Makefile b/testhal/LPC13xx/IRQ_STORM/Makefile deleted file mode 100644 index 081579754..000000000 --- a/testhal/LPC13xx/IRQ_STORM/Makefile +++ /dev/null @@ -1,197 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/EA_LPCXPRESSO_BB_1343/board.mk -include $(CHIBIOS)/os/hal/platforms/LPC13xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/LPC13xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/LPC1343.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - $(CHIBIOS)/os/various/syscalls.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = -DLPC1348 -D__NEWLIB__ - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/LPC13xx/IRQ_STORM/chconf.h b/testhal/LPC13xx/IRQ_STORM/chconf.h deleted file mode 100644 index f943ea80c..000000000 --- a/testhal/LPC13xx/IRQ_STORM/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE FALSE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/LPC13xx/IRQ_STORM/halconf.h b/testhal/LPC13xx/IRQ_STORM/halconf.h deleted file mode 100644 index d91a792b4..000000000 --- a/testhal/LPC13xx/IRQ_STORM/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/LPC13xx/IRQ_STORM/main.c b/testhal/LPC13xx/IRQ_STORM/main.c deleted file mode 100644 index b9c2f0274..000000000 --- a/testhal/LPC13xx/IRQ_STORM/main.c +++ /dev/null @@ -1,324 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include - -#include "ch.h" -#include "hal.h" - -/*===========================================================================*/ -/* Configurable settings. */ -/*===========================================================================*/ - -#ifndef RANDOMIZE -#define RANDOMIZE FALSE -#endif - -#ifndef ITERATIONS -#define ITERATIONS 100 -#endif - -#ifndef NUM_THREADS -#define NUM_THREADS 4 -#endif - -#ifndef MAILBOX_SIZE -#define MAILBOX_SIZE 4 -#endif - -/*===========================================================================*/ -/* Test related code. */ -/*===========================================================================*/ - -#define MSG_SEND_LEFT 0 -#define MSG_SEND_RIGHT 1 - -static bool_t saturated; - -/* - * Mailboxes and buffers. - */ -static Mailbox mb[NUM_THREADS]; -static msg_t b[NUM_THREADS][MAILBOX_SIZE]; - -/* - * Test worker threads. - */ -static WORKING_AREA(waWorkerThread[NUM_THREADS], 128); -static msg_t WorkerThread(void *arg) { - static volatile unsigned x = 0; - static unsigned cnt = 0; - unsigned me = (unsigned)arg; - unsigned target; - unsigned r; - msg_t msg; - - chRegSetThreadName("worker"); - - /* Work loop.*/ - while (TRUE) { - /* Waiting for a message.*/ - chMBFetch(&mb[me], &msg, TIME_INFINITE); - -#if RANDOMIZE - /* Pseudo-random delay.*/ - { - chSysLock(); - r = rand() & 15; - chSysUnlock(); - while (r--) - x++; - } -#else - /* Fixed delay.*/ - { - r = me >> 4; - while (r--) - x++; - } -#endif - - /* Deciding in which direction to re-send the message.*/ - if (msg == MSG_SEND_LEFT) - target = me - 1; - else - target = me + 1; - - if (target < NUM_THREADS) { - /* If this thread is not at the end of a chain re-sending the message, - note this check works because the variable target is unsigned.*/ - msg = chMBPost(&mb[target], msg, TIME_IMMEDIATE); - if (msg != RDY_OK) - saturated = TRUE; - } - else { - /* Provides a visual feedback about the system.*/ - if (++cnt >= 500) { - cnt = 0; - palTogglePad(GPIO0, GPIO0_LED2); - } - } - } -} - -/* - * GPT1 callback. - */ -static void gpt1cb(GPTDriver *gptp) { - msg_t msg; - - (void)gptp; - chSysLockFromIsr(); - msg = chMBPostI(&mb[0], MSG_SEND_RIGHT); - if (msg != RDY_OK) - saturated = TRUE; - chSysUnlockFromIsr(); -} - -/* - * GPT2 callback. - */ -static void gpt2cb(GPTDriver *gptp) { - msg_t msg; - - (void)gptp; - chSysLockFromIsr(); - msg = chMBPostI(&mb[NUM_THREADS - 1], MSG_SEND_LEFT); - if (msg != RDY_OK) - saturated = TRUE; - chSysUnlockFromIsr(); -} - -/* - * GPT1 configuration. - */ -static const GPTConfig gpt1cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt1cb /* Timer callback.*/ -}; - -/* - * GPT2 configuration. - */ -static const GPTConfig gpt2cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt2cb /* Timer callback.*/ -}; - - -/*===========================================================================*/ -/* Generic demo code. */ -/*===========================================================================*/ - -static void print(char *p) { - - while (*p) { - chSequentialStreamPut(&SD1, *p++); - } -} - -static void println(char *p) { - - while (*p) { - chSequentialStreamPut(&SD1, *p++); - } - chSequentialStreamWrite(&SD1, (uint8_t *)"\r\n", 2); -} - -static void printn(uint32_t n) { - char buf[16], *p; - - if (!n) - chSequentialStreamPut(&SD1, '0'); - else { - p = buf; - while (n) - *p++ = (n % 10) + '0', n /= 10; - while (p > buf) - chSequentialStreamPut(&SD1, *--p); - } -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - gptcnt_t interval, threshold, worst; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Prepares the Serial driver 2 and GPT drivers 1 and 2. - */ - sdStart(&SD1, NULL); /* Default is 38400-8-N-1.*/ - gptStart(&GPTD1, &gpt1cfg); - gptStart(&GPTD2, &gpt2cfg); - - /* - * Initializes the mailboxes and creates the worker threads. - */ - for (i = 0; i < NUM_THREADS; i++) { - chMBInit(&mb[i], b[i], MAILBOX_SIZE); - chThdCreateStatic(waWorkerThread[i], sizeof waWorkerThread[i], - NORMALPRIO - 20, WorkerThread, (void *)i); - } - - /* - * Test procedure. - */ - println(""); - println("*** ChibiOS/RT IRQ-STORM long duration test"); - println("***"); - print("*** Kernel: "); - println(CH_KERNEL_VERSION); -#ifdef CH_COMPILER_NAME - print("*** Compiler: "); - println(CH_COMPILER_NAME); -#endif - print("*** Architecture: "); - println(CH_ARCHITECTURE_NAME); -#ifdef CH_CORE_VARIANT_NAME - print("*** Core Variant: "); - println(CH_CORE_VARIANT_NAME); -#endif -#ifdef CH_PORT_INFO - print("*** Port Info: "); - println(CH_PORT_INFO); -#endif -#ifdef PLATFORM_NAME - print("*** Platform: "); - println(PLATFORM_NAME); -#endif -#ifdef BOARD_NAME - print("*** Test Board: "); - println(BOARD_NAME); -#endif - println("***"); - print("*** System Clock: "); - printn(LPC13xx_SYSCLK); - println(""); - print("*** Iterations: "); - printn(ITERATIONS); - println(""); - print("*** Randomize: "); - printn(RANDOMIZE); - println(""); - print("*** Threads: "); - printn(NUM_THREADS); - println(""); - print("*** Mailbox size: "); - printn(MAILBOX_SIZE); - println(""); - - println(""); - worst = 0; - for (i = 1; i <= ITERATIONS; i++){ - print("Iteration "); - printn(i); - println(""); - saturated = FALSE; - threshold = 0; - for (interval = 2000; interval >= 20; interval -= interval / 10) { - gptStartContinuous(&GPTD1, interval - 1); /* Slightly out of phase.*/ - gptStartContinuous(&GPTD2, interval + 1); /* Slightly out of phase.*/ - chThdSleepMilliseconds(1000); - gptStopTimer(&GPTD1); - gptStopTimer(&GPTD2); - if (!saturated) - print("."); - else { - print("#"); - if (threshold == 0) - threshold = interval; - } - } - /* Gives the worker threads a chance to empty the mailboxes before next - cycle.*/ - chThdSleepMilliseconds(20); - println(""); - print("Saturated at "); - printn(threshold); - println(" uS"); - println(""); - if (threshold > worst) - worst = threshold; - } - gptStopTimer(&GPTD1); - gptStopTimer(&GPTD2); - - print("Worst case at "); - printn(worst); - println(" uS"); - println(""); - println("Test Complete"); - - /* - * Normal main() thread activity, nothing in this test. - */ - while (TRUE) { - chThdSleepMilliseconds(5000); - } - return 0; -} diff --git a/testhal/LPC13xx/IRQ_STORM/mcuconf.h b/testhal/LPC13xx/IRQ_STORM/mcuconf.h deleted file mode 100644 index 98da38735..000000000 --- a/testhal/LPC13xx/IRQ_STORM/mcuconf.h +++ /dev/null @@ -1,76 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * LPC13xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the driver - * is enabled in halconf.h. - * - * IRQ priorities: - * 7...0 Lowest...highest. - */ - -/* - * HAL driver system settings. - */ -#define LPC13xx_PLLCLK_SOURCE SYSPLLCLKSEL_SYSOSC -#define LPC13xx_SYSPLL_MUL 6 -#define LPC13xx_SYSPLL_DIV 4 -#define LPC13xx_MAINCLK_SOURCE SYSMAINCLKSEL_PLLOUT -#define LPC13xx_SYSABHCLK_DIV 1 - -/* - * ADC driver system settings. - */ - -/* - * CAN driver system settings. - */ - -/* - * GPT driver system settings. - */ -#define LPC13xx_GPT_USE_CT16B0 TRUE -#define LPC13xx_GPT_USE_CT16B1 TRUE -#define LPC13xx_GPT_USE_CT32B0 TRUE -#define LPC13xx_GPT_USE_CT32B1 TRUE -#define LPC13xx_GPT_CT16B0_IRQ_PRIORITY 2 -#define LPC13xx_GPT_CT16B1_IRQ_PRIORITY 6 -#define LPC13xx_GPT_CT32B0_IRQ_PRIORITY 2 -#define LPC13xx_GPT_CT32B1_IRQ_PRIORITY 2 - -/* - * PWM driver system settings. - */ - -/* - * SERIAL driver system settings. - */ -#define LPC13xx_SERIAL_USE_UART0 TRUE -#define LPC13xx_SERIAL_FIFO_PRELOAD 16 -#define LPC13xx_SERIAL_UART0CLKDIV 1 -#define LPC13xx_SERIAL_UART0_IRQ_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define LPC13xx_SPI_USE_SSP0 TRUE -#define LPC13xx_SPI_SSP0CLKDIV 1 -#define LPC13xx_SPI_SSP0_IRQ_PRIORITY 5 -#define LPC13xx_SPI_SSP_ERROR_HOOK(spip) chSysHalt() -#define LPC13xx_SPI_SCK0_SELECTOR SCK0_IS_PIO2_11 diff --git a/testhal/LPC13xx/IRQ_STORM/readme.txt b/testhal/LPC13xx/IRQ_STORM/readme.txt deleted file mode 100644 index 85a4cee82..000000000 --- a/testhal/LPC13xx/IRQ_STORM/readme.txt +++ /dev/null @@ -1,25 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - IRQ-STORM demo for LPC13xx. ** -***************************************************************************** - -** TARGET ** - -The demo will on an LPCXpresso LPC1114 board. - -** The Demo ** - -The application demonstrates the use of the LPC13xx GPT, PAL and Serial drivers -in order to implement a system stress demo. - -** Build Procedure ** - -The demo has been tested using the free LPCXpresso toolchain but also with -Codesourcery and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -NXP and are licensed under a different license. - - http://www.nxp.com diff --git a/testhal/SPC560BCxx/CAN/Makefile b/testhal/SPC560BCxx/CAN/Makefile deleted file mode 100644 index 97618eebb..000000000 --- a/testhal/SPC560BCxx/CAN/Makefile +++ /dev/null @@ -1,140 +0,0 @@ -############################################################################## -# This file is automatically generated and can be overwritten, do no change -# this file manually. -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data. -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in VLE mode. -ifeq ($(USE_VLE),) - USE_VLE = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = out - -# Imported source files -include components/components.mak - -# Checks if there is a user mak file in the project directory. -ifneq ($(wildcard user.mak),) - include user.mak -endif - -# Define linker script file here -LDSCRIPT= application.ld - -# C sources here. -CSRC = $(LIB_C_SRC) \ - $(APP_C_SRC) \ - $(U_C_SRC) \ - ./components/components.c \ - ./main.c - -# C++ sources here. -CPPSRC = $(LIB_CPP_SRC) \ - $(APP_CPP_SRC) \ - $(U_CPP_SRC) - -# List ASM source files here -ASMSRC = $(LIB_ASM_SRC) \ - $(APP_ASM_SRC) \ - $(U_ASM_SRC) - -INCDIR = $(LIB_INCLUDES) \ - $(APP_INCLUDES) \ - ./components - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -#MCU = e500mc -meabi -msdata=none -mnew-mnemonics -mregnames -MCU = e200zx -meabi -msdata=none -mnew-mnemonics -mregnames - -TRGT = ppc-vle- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = -DSPC560B50L5 - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -include C:/SPC5Studio/eclipse/plugins/com.st.tools.spc5.components.platform.spc560bcxx_1.0.0.201302201417/component/lib/rsc/rules.mk diff --git a/testhal/SPC560BCxx/CAN/chconf.h b/testhal/SPC560BCxx/CAN/chconf.h deleted file mode 100644 index 8800269d4..000000000 --- a/testhal/SPC560BCxx/CAN/chconf.h +++ /dev/null @@ -1,529 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010, - 2011,2012,2013 Giovanni Di Sirio. - - This file is part of ChibiOS/RT. - - ChibiOS/RT is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS/RT is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE FALSE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/SPC560BCxx/CAN/halconf.h b/testhal/SPC560BCxx/CAN/halconf.h deleted file mode 100644 index c316bb385..000000000 --- a/testhal/SPC560BCxx/CAN/halconf.h +++ /dev/null @@ -1,371 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010, - 2011,2012,2013 Giovanni Di Sirio. - - This file is part of ChibiOS/RT. - - ChibiOS/RT is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS/RT is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @name Drivers enable switches - */ -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN TRUE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name ADC driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION FALSE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name CAN driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE FALSE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name I2C driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION FALSE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name MAC driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name MMC_SPI driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name SDC driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 1 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name SERIAL driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name SERIAL_USB driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 64 -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name SPI driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION FALSE -#endif -/** @} */ - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/SPC560BCxx/CAN/main.c b/testhal/SPC560BCxx/CAN/main.c deleted file mode 100644 index 8525d7ddd..000000000 --- a/testhal/SPC560BCxx/CAN/main.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -struct can_instance { - CANDriver *canp; - uint32_t led; -}; - -static const struct can_instance can1 = {&CAND5, PE_LED1}; - -/* - * Internal loopback mode, 500kBaud. - * See chapter 25 on the SPC5 reference manual. - */ -static const CANConfig cancfg = { - CAN_MCR_WRN_EN, - CAN_CTRL_LPB | CAN_CTRL_PROPSEG(2) | CAN_CTRL_PSEG2(7) | - CAN_CTRL_PSEG1(3) | CAN_CTRL_PRESDIV(3) -#if SPC5_CAN_USE_FILTERS - , - { - {0, 0x00000001}, - {1, 0x01234567}, - {0, 0x00000000}, - {0, 0x00000003}, - {0, 0x00000004}, - {0, 0x00000005}, - {0, 0x00000006}, - {0, 0x00000007} - } -#endif -}; - -#if SPC5_CAN_USE_FILTERS -flagsmask_t rxFlag; -#endif - -/* - * Receiver thread. - */ -static WORKING_AREA(can_rx_wa, 256); -static msg_t can_rx(void *p) { - struct can_instance *cip = p; - EventListener el; - CANRxFrame rxmsg; - (void)p; - chRegSetThreadName("receiver"); - chEvtRegister(&cip->canp->rxfull_event, &el, 0); -#if SPC5_CAN_USE_FILTERS - rxFlag = chEvtGetAndClearFlagsI(&el); -#endif - while(!chThdShouldTerminate()) { - if (chEvtWaitAnyTimeout(ALL_EVENTS, MS2ST(100)) == 0) - continue; -#if !SPC5_CAN_USE_FILTERS - while (canReceive(cip->canp, CAN_ANY_MAILBOX, - &rxmsg, TIME_IMMEDIATE) == RDY_OK) { - /* Process message.*/ - palTogglePad(PORT_E, cip->led); - } -#else - while (canReceive(cip->canp, rxFlag, - &rxmsg, TIME_IMMEDIATE) == RDY_OK) { - /* Process message.*/ - palTogglePad(PORT_E, cip->led); - } -#endif - } - chEvtUnregister(&CAND5.rxfull_event, &el); - return 0; -} - -/* - * Transmitter thread. - */ -static WORKING_AREA(can_tx_wa, 256); -static msg_t can_tx(void * p) { - CANTxFrame txmsg; - - (void)p; - chRegSetThreadName("transmitter"); - txmsg.IDE = CAN_IDE_EXT; - txmsg.EID = 0x01234567; - txmsg.RTR = CAN_RTR_DATA; - txmsg.LENGTH = 8; - txmsg.data32[0] = 0x55AA55AA; - txmsg.data32[1] = 0x00FF00FF; - - while (!chThdShouldTerminate()) { - canTransmit(&CAND5, 1, &txmsg, MS2ST(100)); - palTogglePad(PORT_E, PE_LED2); - chThdSleepMilliseconds(500); - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the CAN driver 1. - */ - canStart(&CAND5, &cancfg); - - /* - * Starting the transmitter and receiver threads. - */ - chThdCreateStatic(can_rx_wa, sizeof(can_rx_wa), NORMALPRIO + 7, - can_rx, (void *)&can1); - chThdCreateStatic(can_tx_wa, sizeof(can_tx_wa), NORMALPRIO + 7, - can_tx, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} - diff --git a/testhal/SPC560BCxx/CAN/mcuconf.h b/testhal/SPC560BCxx/CAN/mcuconf.h deleted file mode 100644 index dc667bb74..000000000 --- a/testhal/SPC560BCxx/CAN/mcuconf.h +++ /dev/null @@ -1,223 +0,0 @@ -/* - * Licensed under ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -/* - * SPC560B/Cxx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 1...15 Lowest...Highest. - */ - -#define SPC560BCxx_MCUCONF - -/* - * HAL driver system settings. - */ -#define SPC5_NO_INIT FALSE -#define SPC5_ALLOW_OVERCLOCK FALSE -#define SPC5_DISABLE_WATCHDOG TRUE -#define SPC5_FMPLL0_IDF_VALUE 1 -#define SPC5_FMPLL0_NDIV_VALUE 32 -#define SPC5_FMPLL0_ODF SPC5_FMPLL_ODF_DIV4 -#define SPC5_XOSCDIV_VALUE 1 -#define SPC5_IRCDIV_VALUE 1 -#define SPC5_PERIPHERAL1_CLK_DIV_VALUE 2 -#define SPC5_PERIPHERAL2_CLK_DIV_VALUE 2 -#define SPC5_PERIPHERAL3_CLK_DIV_VALUE 2 -#define SPC5_ME_ME_BITS (SPC5_ME_ME_RUN1 | \ - SPC5_ME_ME_RUN2 | \ - SPC5_ME_ME_RUN3 | \ - SPC5_ME_ME_HALT0 | \ - SPC5_ME_ME_STOP0 | \ - SPC5_ME_ME_STANDBY0) -#define SPC5_ME_TEST_MC_BITS (SPC5_ME_MC_SYSCLK_IRC | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_SAFE_MC_BITS (SPC5_ME_MC_PDO) -#define SPC5_ME_DRUN_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN1_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN2_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN3_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_HALT0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_STOP0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_STANDBY0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN_PC0_BITS 0 -#define SPC5_ME_RUN_PC1_BITS (SPC5_ME_RUN_PC_TEST | \ - SPC5_ME_RUN_PC_SAFE | \ - SPC5_ME_RUN_PC_DRUN | \ - SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC2_BITS (SPC5_ME_RUN_PC_DRUN | \ - SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC3_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC4_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC5_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC6_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC7_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_LP_PC0_BITS 0 -#define SPC5_ME_LP_PC1_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0 | \ - SPC5_ME_LP_PC_STANDBY0) -#define SPC5_ME_LP_PC2_BITS (SPC5_ME_LP_PC_HALT0) -#define SPC5_ME_LP_PC3_BITS (SPC5_ME_LP_PC_STOP0) -#define SPC5_ME_LP_PC4_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_ME_LP_PC5_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_ME_LP_PC6_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_ME_LP_PC7_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_PIT0_IRQ_PRIORITY 4 -#define SPC5_CLOCK_FAILURE_HOOK() chSysHalt() - -/* - * SERIAL driver system settings. - */ -#define SPC5_SERIAL_USE_LINFLEX0 TRUE -#define SPC5_SERIAL_USE_LINFLEX1 TRUE -#define SPC5_SERIAL_LINFLEX0_PRIORITY 8 -#define SPC5_SERIAL_LINFLEX1_PRIORITY 8 -#define SPC5_SERIAL_LINFLEX0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SERIAL_LINFLEX0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) -#define SPC5_SERIAL_LINFLEX1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SERIAL_LINFLEX1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -/* - * CAN driver system settings. - */ -#define SPC5_CAN_USE_FILTERS TRUE - -#define SPC5_CAN_USE_FLEXCAN0 FALSE -#define SPC5_CAN_FLEXCAN0_PRIORITY 11 -#define SPC5_CAN_FLEXCAN0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_CAN_FLEXCAN0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -#define SPC5_CAN_USE_FLEXCAN1 FALSE -#define SPC5_CAN_FLEXCAN1_PRIORITY 11 -#define SPC5_CAN_FLEXCAN1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_CAN_FLEXCAN1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -#define SPC5_CAN_USE_FLEXCAN2 FALSE -#define SPC5_CAN_FLEXCAN2_PRIORITY 11 -#define SPC5_CAN_FLEXCAN2_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_CAN_FLEXCAN2_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -#define SPC5_CAN_USE_FLEXCAN3 FALSE -#define SPC5_CAN_FLEXCAN3_PRIORITY 11 -#define SPC5_CAN_FLEXCAN3_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_CAN_FLEXCAN3_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -#define SPC5_CAN_USE_FLEXCAN4 TRUE -#define SPC5_CAN_FLEXCAN4_PRIORITY 11 -#define SPC5_CAN_FLEXCAN4_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_CAN_FLEXCAN4_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -#define SPC5_CAN_USE_FLEXCAN5 FALSE -#define SPC5_CAN_FLEXCAN5_PRIORITY 11 -#define SPC5_CAN_FLEXCAN5_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_CAN_FLEXCAN5_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) diff --git a/testhal/SPC560BCxx/CAN/readme.txt b/testhal/SPC560BCxx/CAN/readme.txt deleted file mode 100644 index 78f7e7cd5..000000000 --- a/testhal/SPC560BCxx/CAN/readme.txt +++ /dev/null @@ -1,27 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - CAN drivers demo for SPC560BCxx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics SPC560BCxx microcontroller installed on -XPC56xx EVB Motherboard. - -** The Demo ** - -The application demonstrates the use of the SPC560BCxx CAN drivers. - -** Board Setup ** - -- Enable LED1 and LED2. - -** Build Procedure ** - -The demo has been tested using HighTec compiler. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. - - http://www.st.com diff --git a/testhal/SPC560BCxx/ICU-PWM/Makefile b/testhal/SPC560BCxx/ICU-PWM/Makefile deleted file mode 100644 index 9e39b8301..000000000 --- a/testhal/SPC560BCxx/ICU-PWM/Makefile +++ /dev/null @@ -1,121 +0,0 @@ -############################################################################## -# This file is automatically generated and can be overwritten, do no change -# this file manually. -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data. -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in VLE mode. -ifeq ($(USE_VLE),) - USE_VLE = yes -endif - -# Linker options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = out - -# Imported source files -include components/components.mak - -# Checks if there is a user mak file in the project directory. -ifneq ($(wildcard user.mak),) - include user.mak -endif - -# Define linker script file here -LDSCRIPT= application.ld - -# C sources here. -CSRC = $(LIB_C_SRC) \ - $(APP_C_SRC) \ - $(U_C_SRC) \ - ./components/components.c \ - ./main.c - -# C++ sources here. -CPPSRC = $(LIB_CPP_SRC) \ - $(APP_CPP_SRC) \ - $(U_CPP_SRC) - -# List ASM source files here -ASMSRC = $(LIB_ASM_SRC) \ - $(APP_ASM_SRC) \ - $(U_ASM_SRC) - -INCDIR = $(LIB_INCLUDES) \ - $(APP_INCLUDES) \ - ./components - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = e200zx -meabi -msdata=none -mnew-mnemonics -mregnames - -TRGT = ppc-vle- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -include C:/SPC5Studio/eclipse/plugins/com.st.tools.spc5.components.platform.spc560bcxx_1.0.0.201305101230/component/lib/rsc/rules.mk diff --git a/testhal/SPC560BCxx/ICU-PWM/chconf.h b/testhal/SPC560BCxx/ICU-PWM/chconf.h deleted file mode 100644 index db0d97427..000000000 --- a/testhal/SPC560BCxx/ICU-PWM/chconf.h +++ /dev/null @@ -1,536 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010, - 2011,2012 Giovanni Di Sirio. - - This file is part of ChibiOS/RT. - - ChibiOS/RT is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS/RT is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . - - --- - - A special exception to the GPL can be applied should you wish to distribute - a combined work that includes ChibiOS/RT, without being obliged to provide - the source code for any proprietary components. See the file exception.txt - for full details of how and when the exception can be applied. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES FALSE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE FALSE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/SPC560BCxx/ICU-PWM/halconf.h b/testhal/SPC560BCxx/ICU-PWM/halconf.h deleted file mode 100644 index 24462dafd..000000000 --- a/testhal/SPC560BCxx/ICU-PWM/halconf.h +++ /dev/null @@ -1,367 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @name Drivers enable switches - */ -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU TRUE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name ADC driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION FALSE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name CAN driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name I2C driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION FALSE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name MAC driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name MMC_SPI driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name SDC driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 1 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name SERIAL driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name SERIAL_USB driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 64 -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name SPI driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION FALSE -#endif -/** @} */ - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/SPC560BCxx/ICU-PWM/main.c b/testhal/SPC560BCxx/ICU-PWM/main.c deleted file mode 100644 index 11b4a8a23..000000000 --- a/testhal/SPC560BCxx/ICU-PWM/main.c +++ /dev/null @@ -1,151 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void pwmpcb(PWMDriver *pwmp) { - - (void)pwmp; - palClearPad(PORT_E, PE_LED1); - -} - -static void pwmc1cb(PWMDriver *pwmp) { - - (void)pwmp; - palSetPad(PORT_E, PE_LED1); -} - -static PWMConfig pwmcfg = { - 40000, /* 40kHz PWM clock frequency.*/ - 20000, /* Initial PWM period 0.5s.*/ - pwmpcb, - { - {PWM_OUTPUT_ACTIVE_LOW, pwmc1cb}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL} - }, - PWM_ALIGN_EDGE -}; - -icucnt_t last_width, last_period; - -static void icuwidthcb(ICUDriver *icup) { - - palSetPad(PORT_E, PE_LED2); - last_width = icuGetWidth(icup); -} - -static void icuperiodcb(ICUDriver *icup) { - - palClearPad(PORT_E, PE_LED2); - last_period = icuGetPeriod(icup); -} - -static ICUConfig icucfg = { - ICU_INPUT_ACTIVE_LOW, - 40000, /* 40kHz ICU clock frequency.*/ - icuwidthcb, - icuperiodcb, - NULL -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - palClearPad(PORT_E, PE_LED4); - - /* - * Initializes the PWM driver 1 and ICU driver 1. - * GPIOA9 is the PWM channel 0 output. - * GPIOA0 is the ICU input. - * The two pins have to be externally connected together. - */ - icuStart(&ICUD1, &icucfg); - icuEnable(&ICUD1); - - /* Sets A0 alternative function.*/ - SIU.PCR[0].R = 0b0000010100000100; - - /* Sets A9 alternative function.*/ - SIU.PCR[9U].R = 0b0000011000000100; - - pwmStart(&PWMD1, &pwmcfg); - - chThdSleepMilliseconds(2000); - - /* - * Starts the PWM channel 0 using 75% duty cycle. - */ - pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 7500)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 50% duty cycle. - */ - pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 5000)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 25% duty cycle. - */ - pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 2500)); - chThdSleepMilliseconds(5000); - - /* - * Changes PWM period and the PWM channel 0 to 50% duty cycle. - */ - pwmChangePeriod(&PWMD1, 30000); - pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 5000)); - chThdSleepMilliseconds(5000); - - /* - * Disables channel 0 and stops the drivers. - */ - pwmDisableChannel(&PWMD1, 0); - pwmStop(&PWMD1); - - icuDisable(&ICUD1); - icuStop(&ICUD1); - - palClearPad(PORT_E, PE_LED3); - palClearPad(PORT_E, PE_LED4); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/SPC560BCxx/ICU-PWM/mcuconf.h b/testhal/SPC560BCxx/ICU-PWM/mcuconf.h deleted file mode 100644 index 010a16b16..000000000 --- a/testhal/SPC560BCxx/ICU-PWM/mcuconf.h +++ /dev/null @@ -1,242 +0,0 @@ -/* - SPC5 HAL - Copyright (C) 2013 STMicroelectronics - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * SPC560B/Cxx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 1...15 Lowest...Highest. - */ - -#define SPC560BCxx_MCUCONF - -/* - * HAL driver system settings. - */ -#define SPC5_NO_INIT FALSE -#define SPC5_ALLOW_OVERCLOCK FALSE -#define SPC5_DISABLE_WATCHDOG TRUE -#define SPC5_FMPLL0_IDF_VALUE 1 -#define SPC5_FMPLL0_NDIV_VALUE 32 -#define SPC5_FMPLL0_ODF SPC5_FMPLL_ODF_DIV4 -#define SPC5_XOSCDIV_VALUE 1 -#define SPC5_IRCDIV_VALUE 1 -#define SPC5_PERIPHERAL1_CLK_DIV_VALUE 2 -#define SPC5_PERIPHERAL2_CLK_DIV_VALUE 2 -#define SPC5_PERIPHERAL3_CLK_DIV_VALUE 2 -#define SPC5_ME_ME_BITS (SPC5_ME_ME_RUN1 | \ - SPC5_ME_ME_RUN2 | \ - SPC5_ME_ME_RUN3 | \ - SPC5_ME_ME_HALT0 | \ - SPC5_ME_ME_STOP0 | \ - SPC5_ME_ME_STANDBY0) -#define SPC5_ME_TEST_MC_BITS (SPC5_ME_MC_SYSCLK_IRC | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_SAFE_MC_BITS (SPC5_ME_MC_PDO) -#define SPC5_ME_DRUN_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN1_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN2_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN3_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_HALT0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_STOP0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_STANDBY0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN_PC0_BITS 0 -#define SPC5_ME_RUN_PC1_BITS (SPC5_ME_RUN_PC_TEST | \ - SPC5_ME_RUN_PC_SAFE | \ - SPC5_ME_RUN_PC_DRUN | \ - SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC2_BITS (SPC5_ME_RUN_PC_DRUN | \ - SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC3_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC4_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC5_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC6_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC7_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_LP_PC0_BITS 0 -#define SPC5_ME_LP_PC1_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0 | \ - SPC5_ME_LP_PC_STANDBY0) -#define SPC5_ME_LP_PC2_BITS (SPC5_ME_LP_PC_HALT0) -#define SPC5_ME_LP_PC3_BITS (SPC5_ME_LP_PC_STOP0) -#define SPC5_ME_LP_PC4_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_ME_LP_PC5_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_ME_LP_PC6_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_ME_LP_PC7_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_PIT0_IRQ_PRIORITY 4 -#define SPC5_CLOCK_FAILURE_HOOK() chSysHalt() - -/* - * SERIAL driver system settings. - */ -#define SPC5_SERIAL_USE_LINFLEX0 TRUE -#define SPC5_SERIAL_USE_LINFLEX1 FALSE -#define SPC5_SERIAL_LINFLEX0_PRIORITY 8 -#define SPC5_SERIAL_LINFLEX1_PRIORITY 8 -#define SPC5_SERIAL_LINFLEX0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SERIAL_LINFLEX0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) -#define SPC5_SERIAL_LINFLEX1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SERIAL_LINFLEX1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -/* - * ICU-PWM driver system settings. - */ -#define SPC5_EMIOS0_GLOBAL_PRESCALER 200 /* 8-bit GPRE*/ - -#define SPC5_ICU_USE_EMIOS0_CH0 TRUE -#define SPC5_ICU_USE_EMIOS0_CH1 TRUE -#define SPC5_ICU_USE_EMIOS0_CH2 TRUE -#define SPC5_ICU_USE_EMIOS0_CH3 TRUE -#define SPC5_ICU_USE_EMIOS0_CH4 TRUE -#define SPC5_ICU_USE_EMIOS0_CH5 TRUE -#define SPC5_ICU_USE_EMIOS0_CH6 TRUE -#define SPC5_ICU_USE_EMIOS0_CH7 TRUE -#define SPC5_ICU_USE_EMIOS0_CH24 TRUE - -#define SPC5_PWM_USE_EMIOS0_GROUP0 TRUE -#define SPC5_PWM_USE_EMIOS0_GROUP1 TRUE - -#define SPC5_EMIOS0_GFR_F0F1_PRIORITY 7 -#define SPC5_EMIOS0_GFR_F2F3_PRIORITY 7 -#define SPC5_EMIOS0_GFR_F4F5_PRIORITY 7 -#define SPC5_EMIOS0_GFR_F6F7_PRIORITY 7 -#define SPC5_EMIOS0_GFR_F8F9_PRIORITY 7 -#define SPC5_EMIOS0_GFR_F10F11_PRIORITY 7 -#define SPC5_EMIOS0_GFR_F12F13_PRIORITY 7 -#define SPC5_EMIOS0_GFR_F14F15_PRIORITY 7 -#define SPC5_EMIOS0_GFR_F16F17_PRIORITY 7 -#define SPC5_EMIOS0_GFR_F18F19_PRIORITY 7 -#define SPC5_EMIOS0_GFR_F20F21_PRIORITY 7 -#define SPC5_EMIOS0_GFR_F22F23_PRIORITY 7 -#define SPC5_EMIOS0_GFR_F24F25_PRIORITY 7 - -#define SPC5_EMIOS0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_EMIOS0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -#define SPC5_EMIOS1_GLOBAL_PRESCALER 200 /* 8-bit GPRE*/ - -#define SPC5_ICU_USE_EMIOS1_CH24 TRUE - -#define SPC5_PWM_USE_EMIOS1_GROUP0 TRUE -#define SPC5_PWM_USE_EMIOS1_GROUP1 TRUE -#define SPC5_PWM_USE_EMIOS1_GROUP2 TRUE - -#define SPC5_EMIOS1_GFR_F0F1_PRIORITY 7 -#define SPC5_EMIOS1_GFR_F2F3_PRIORITY 7 -#define SPC5_EMIOS1_GFR_F4F5_PRIORITY 7 -#define SPC5_EMIOS1_GFR_F6F7_PRIORITY 7 -#define SPC5_EMIOS1_GFR_F8F9_PRIORITY 7 -#define SPC5_EMIOS1_GFR_F10F11_PRIORITY 7 -#define SPC5_EMIOS1_GFR_F12F13_PRIORITY 7 -#define SPC5_EMIOS1_GFR_F14F15_PRIORITY 7 -#define SPC5_EMIOS1_GFR_F16F17_PRIORITY 7 -#define SPC5_EMIOS1_GFR_F18F19_PRIORITY 7 -#define SPC5_EMIOS1_GFR_F20F21_PRIORITY 7 -#define SPC5_EMIOS1_GFR_F22F23_PRIORITY 7 -#define SPC5_EMIOS1_GFR_F24F25_PRIORITY 7 - -#define SPC5_EMIOS1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_EMIOS1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) diff --git a/testhal/SPC560BCxx/ICU-PWM/readme.txt b/testhal/SPC560BCxx/ICU-PWM/readme.txt deleted file mode 100644 index 6c64a8d21..000000000 --- a/testhal/SPC560BCxx/ICU-PWM/readme.txt +++ /dev/null @@ -1,27 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - ICU-PWM driver demo for SPC560BCxx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics SPC560BCxx microcontroller installed on -XPC56xx EVB Motherboard. - -** The Demo ** - -The application demonstrates the use of the SPC560BCxx ICU and PWM drivers. - -** Board Setup ** - -Connect PINA0 and PINA9 together. - -** Build Procedure ** - -The demo has been tested using HighTec compiler. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. - - http://www.st.com diff --git a/testhal/SPC560Dxx/SPI/.cproject b/testhal/SPC560Dxx/SPI/.cproject deleted file mode 100644 index a4ae17c6d..000000000 --- a/testhal/SPC560Dxx/SPI/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/SPC560Dxx/SPI/.project b/testhal/SPC560Dxx/SPI/.project deleted file mode 100644 index 7000648ab..000000000 --- a/testhal/SPC560Dxx/SPI/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - SPC560Dxx-SPI - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_EVB_SPC560D - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/SPC560Dxx/SPI/Makefile b/testhal/SPC560Dxx/SPI/Makefile deleted file mode 100644 index 833d3878a..000000000 --- a/testhal/SPC560Dxx/SPI/Makefile +++ /dev/null @@ -1,168 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data. -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# If enabled, this option allows to compile the application in VLE mode. -ifeq ($(USE_VLE),) - USE_VLE = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_EVB_SPC560D/board.mk -include $(CHIBIOS)/os/hal/platforms/SPC560Dxx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/PPC/SPC560Dxx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/SPC560D40.ld - -# C sources here. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - $(CHIBIOS)/os/various/shell.c \ - $(CHIBIOS)/os/various/chprintf.c \ - main.c - -# C++ sources here. -CPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -#MCU = e500mc -meabi -msdata=none -mnew-mnemonics -mregnames -MCU = e200zx -meabi -msdata=none -mnew-mnemonics -mregnames - -#TRGT = powerpc-eabi- -TRGT = ppc-vle- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = -D_SPC560P50L5_ - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -include $(CHIBIOS)/os/ports/GCC/PPC/rules.mk diff --git a/testhal/SPC560Dxx/SPI/UDE/debug .wsx b/testhal/SPC560Dxx/SPI/UDE/debug .wsx deleted file mode 100644 index 8a1dc048c..000000000 --- a/testhal/SPC560Dxx/SPI/UDE/debug .wsx +++ /dev/null @@ -1,273 +0,0 @@ - - - debug .wsx002vQTv/gAAAQAXAAIA6AkIAAAABAAAAAAAPwAAAAAAAAAEAAAAAgAAAAAAAAAAAAAAAAAAAA==4.019.11.2012 16:18:08:999MCAAAAAAAAAAAAAABAAAAAAAPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPHHAAAAAAPBAAAAAADGFAAAAABCDAAAAAFalseTrue1416801050593930FalseFalse1000000000000000UDEStatusBarFor Help, press F10594191105964705939959398593975940359401594065940200FalseFalse0000000000CUDEDockBar05942230911000FalseFalse0000000000CUDEDockBar05942030910000FalseFalse0000000000CUDEDockBar059647381True59419-1-11251268196-21474836480908FalseFalse1000000381271252277651106144014947UDEMDIMenuBarMenu bar0Menu barBAAAAAAIAACAAAAAAIAADAAAAAAIAAEAAAAAAIAAFAAAAAAIAAGAAAAAAIAAHAAAAAAIAAIAAAAAAIAAJAAAAAAIAAKAAAAAAIAA5939850326True050326614568196-21474836480780FalseFalse1562500111300006144014946CUdeCustomToolBarEdit0Edit2DCBOAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAACCBOAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAFCBOAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAIABOAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAA5939761426True061426794568196-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-21474836481181049967780FalseFalse3125000134300006144014946CUdeCustomToolBarConfig0Config2GJHBAAAAAADAAAAAAADBGGJPINFFOGHPIEPKKCPFOMBDBNDAKPAAAAAAAAPPPPPPPPAAAAAAAAMMHBAAAAAAOPAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAANMHBAAAAAAAABAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAAFNHBAAAAAAGAAAAAAAKBDLFIMBFCNFHJBEGJFDMJNFCMOIPKHNAAAAAAAAPPPPPPPPAAAAAAAAINHBAAAAAACBAAAAAADBGGJPINFFOGHPIEPKKCPFOMBDBNDAKPAAAAAAAAPPPPPPPPAAAAAAAA5940192826True0928261407568196-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-21474836480780FalseFalse12500000246300006144014946CUdeCustomToolBarMacro0Macro2DKHBAAAAAALDAAAAAAGDHJMPFPDOOJLAGELLAIHGBMMEFJBIPLAAAAAAAAPPPPPPPPAAAAAAAAEKHBAAAAAAAEAAAAAAGDHJMPFPDOOJLAGELLAIHGBMMEFJBIPLAAAAAAAAPPPPPPPPAAAAAAAAGKHBAAAAAAMDAAAAAAGDHJMPFPDOOJLAGELLAIHGBMMEFJBIPLAAAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAMKHBAAAACAGJAAAAAAAAAANMAJBFNENHHACJPEILAJFEFEECLCDPKCBAAAAAAAKAAAAAAANAAAAAAAFFEEFEHFPGCHLGDHAHBGDGFGAA5939926504True59419-126503568196-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-21474836480780FalseFalse50000000142300006144014946CUdeCustomToolBarTools0ToolsDNHBAAAACAEGAAAAAAAAAAGEAOMHHDMDCIFAKEIIICDBCMNFEDNFHHBAAAAAAAGAAAAAAAFAAAAAAADEPGCHFGAAHNHBAAAAAABOAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAA911015True594221512521554-214748364803889FalseFalse1000000300180125115030018006144014948CTabWndControlBarTab Window Bar 00-1FalseUDEDesktop Standard BarsTab Window Bar 0UDEDesktop0015019100False00True000004-214748364803889FalseFalse100000030018030018015018006144014948CUdeProjectWspBarProject Workspace Bar0-1FalseUDEDesktop Standard BarsProject Workspace BarUDEDesktop0001TrueTrueFalse21.11.2012 14:43:52:278487782411WorkspaceManager11019.11.2012 16:28:52:057MgAAAA==AQAAAA==ZAAAAA==AQAAAA==lgAAAA==AQAAAA==6AMAAA==AQAAAA==139011201WorkspaceManager110000110010\\napnt002.nap.st.com\NAPPRT0001000WorkspaceManagerWorkspaceManager01Core1Target0.Controller0.CoreTarget0.Controller0.Core102200701438312957781279740NormalfalseTop1271falseBottom0000falsefalse00DockPaneltrue417falseLeft0000falsefalse00DockPaneltrue417falseLeft0000falsefalse10DockPanelfalse0falseTop0000falsefalse0-1TabbedDocumenttrue417falseLeft0000falsefalse20DockPanelfalse417falseLeft0000falsefalse30DockPanelfalsetrue556false200false200true200true100truetrue0012797400127924Platform Main Menufalsetrue4249525Edit ToolbarfalsetrueUDE_Workspace_0x1779trueCutImagetrueUDE_Workspace_0x177AtrueCopyImagetrueUDE_Workspace_0x177BtruePasteImagetrue992427625Macro ToolbarfalsetrueUDE_0x3B_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}trueRun MacroImagetrueUDE_0x40_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}trueDebug MacroImagetrueUDE_0x3_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}trueBreak MacroImagetrueUDE_0x3C_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}trueReload MacroImagetrueUDE_Ctrl_{4D5190CD-077D-4F92-B890-4545242BF32A}_UDEWorkspacetrueImageAndTextfalse3752421025File ToolbarfalsetrueUDE_Workspace_0x1770trueNew WorkspaceImagetrueUDE_Workspace_0x1771trueOpen workspaceImagetrueUDE_Workspace_0x1772trueSave workspace asImagetrueUDE_Workspace_0x1773trueSave workspaceImagetrueUDE_Workspace_0x1774trueClose workspaceImagetrueUDE_Workspace_0x177FtrueExport view contentImagetrueUDE_Workspace_0x1778truePrintImagetrueUDE_0x1_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}trueLoad ProgramImagetrue5852444025Views ToolbarfalsetrueUDE_0x4_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}trueTarget BrowserImagetrueUDE_0x15_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}trueDiagnostic Message ViewerImagetrueUDE_0xF_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}trueConsoleImagetrueUDE_0x0_{DED51A60-E0B7-11D4-9112-0001034962B6}trueCPU WindowImagetrueUDE_0x1E_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}trueExplore SymbolsImagetrueUDE_0xA_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}trueProgramImagetrueUDE_0x5C_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}trueSingle Program WindowImagetrueUDE_0x5A_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}trueDisassembly WindowImagetrueUDE_0x2D_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}trueShow Special Function RegisterImagetrueUDE_0x3C_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}trueLocalsImagetrueUDE_0x46_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}trueWatchImagetrueUDE_0xA_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}trueSimulated I/OImagetrueUDE_0x14_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}trueUDE HTMLImagetrueUDE_0x19_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}trueArray ChartImagetrueUDE_0x1B_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}trueTime Traced Signal ChartImagetrueUDE_0x50_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}trueIP Trace ProfilingImagetrueUDE_0x28_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}trueMemoryImagetrueUDE_0x46_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}trueCall StackImagetrue34950925Debug ToolbarfalsetrueUDE_0x18_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}trueShow IPImagetrueUDE_0x5E_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}trueShow program codeImagetrueUDE_0x7_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}trueStart ProgramImagetrueUDE_0x9_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}trueStep OverImagetrueUDE_0xA_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}trueStep IntoImagetrueUDE_0xB_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}trueStep OutImagetrueUDE_0x8_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}trueRun CursorImagetrueUDE_0x321_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}trueBreak ProgramImagetrueUDE_0xD_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}trueResetImagetrueUDE_0xC_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}trueRestart ProgramImagetrueUDE_0x3_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}trueBreakpointsImagetrueUDE_0x6_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}trueToggle BreakImagetrueUDE_Ctrl_{FB7BC773-88A4-4ECE-B9B6-7189610B0735}_CoretrueImageAndTextfalseUDE_0x3_{1C85B31A-5D25-4197-9635-9C5DC28EAFD7}trueTrigger setupImagetrue5124914125Config ToolbarfalsetrueUDE_0x3_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}trueTarget ConfigurationImagetrueUDE_0xFE_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}trueConnect TargetImagetrueUDE_0x100_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}trueDisconnect TargetImagetrueUDE_0x6_{1C85B31A-5D25-4197-9635-9C5DC28EAFD7}trueSetup Target InterfaceImagetrueUDE_0x12_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}trueMCU Run ControlImagetrue6534915125Tools ToolbarfalsetrueUDE_Ctrl_{377CE046-823C-4A05-8828-13C25D345D77}_CoretrueImageAndTextfalseUDE_0xE1_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}trueExecution Time SetupImagetrue01002625Show Toolbarfalsefalse02002625Window Toolbarfalsefalse02252625Workspace Toolbarfalsefalse02752625Help Toolbarfalsefalse071712792300127923Platform Status Barfalsetrue07406431279740643..\..\..\..\..\Program Files\pls\UDE 4.0\StdLibrary.mso{866f82d3-fac5-43cd-8a82-0af01e46e2c5}669,1006,350,6610..\..\..\..\..\Documents and Settings\disiriog\My Documents\pls\UDE 4.0The script contains a collection of macros to save memory content into different file formats -and fill target memory rangesV:\UDE\AddOns\Macro\MacroLibrary\StdMacros1.dsm' -' $Header: /Ude/AddOns/Macro/MacroLibrary/StdMacros.dsm 3 30.04.04 9:34 Weisses $ -'_______________________________________________________ -' -' universal debug engine -' -' Standard command line macros - part 1 -' -' pls Development Tools 1999-2004 -' -' 28.04.04 SW correction for UDE 1.10 -' 03.06.03 SW initial version -'_______________________________________________________ - -'_______________________________________________________ -' -' UnAss command line function -' -' generates disassembly file -' -' command line UnAss output-file range1 [range2] [range3] ..... -' range description: -' C:<startaddress>,<length> or - code -' DB:<startaddress>,<length> or - data byte -' DW:<startaddress>,<length> or - data word -' DD:<startaddress>,<length> or - data dword -'_______________________________________________________ - -Sub UnAss(File,ParameterObj) - - set debugger = workspace.Coredebugger(0) - set DisASMObj = debugger.DisASMObj - If Not IsObject(ParameterObj) Then - MsgBox "Number of parameters wrong" - Exit Sub - End If - If IsNumeric(File) Then - MsgBox "File parameter wrong - " & File - Exit Sub - End If - DisASMObj.OutputPath = CStr(File) - bRetVal = DisASMObj.CreateStream(True,"UDE Disassembler output of current Program",False) - If bRetVal = True Then - ParmeterCnt = ParameterObj.ParameterCount - If ParmeterCnt = 0 Then - MsgBox "Number of parameters wrong " & ParmeterCnt - Exit Sub - End If - If ( ParmeterCnt Mod 3 ) <> 0 Then - MsgBox "Number of parameters wrong " & ParmeterCnt - Exit Sub - End If - RangeCnt = ParmeterCnt/3 - ParamIndex = 0 - For Range = 0 To RangeCnt -1 - KindOfRange = CStr(ParameterObj.Parameter(ParamIndex)) - KindOfRange = UCase(KindOfRange) - Address = CLng(ParameterObj.Parameter(ParamIndex +1)) - Length = CLng(ParameterObj.Parameter(ParamIndex +2)) - ParamIndex = ParamIndex +3 - If IsNumeric(KindOfRange) Then - If KindOfRange = 12 Then - DisASMObj.AddRange Address,Length,1 - ElseIf KindOfRange = 219 Then - DisASMObj.AddRange Address,Length,2 - ElseIf KindOfRange = 221 Then - DisASMObj.AddRange Address,Length,4 - Else - MsgBox "Invalid range type " & KindOfRange & "of range " & Range +1 - Exit Sub - End If - Else - If KindOfRange = "C" Then - DisASMObj.AddRange Address,Length,1 - ElseIf KindOfRange = "DB" Then - DisASMObj.AddRange Address,Length,2 - ElseIf KindOfRange = "DW" Then - DisASMObj.AddRange Address,Length,3 - ElseIf KindOfRange = "DD" Then - DisASMObj.AddRange Address,Length,4 - Else - MsgBox "Invalid range type " & KindOfRange & "of range " & Range +1 - Exit Sub - End If - End If - Next - DisASMObj.HexFileModeFlag = False - DisASMObj.ListModeFlag = False - DisASMObj.WriteAllRanges(False) - End If - -End Sub - -'_______________________________________________________ -' -' SaveHEX command line function -' -' generates intel-HEX file -' -' command line SaveHex output-file range1 [range2] [range3] ..... -' range description: -' <startaddress>,<length> -'_______________________________________________________ - -Sub SaveHEX(File,ParameterObj) - - set debugger = workspace.Coredebugger(0) - set DisASMObj = debugger.DisASMObj - If Not IsObject(ParameterObj) Then - MsgBox "Number of parameters wrong" - Exit Sub - End If - If IsNumeric(File) Then - MsgBox "File parameter wrong - " & File - Exit Sub - End If - DisASMObj.OutputPath = CStr(File) - bRetVal = DisASMObj.CreateStream(True,"UDE generated intel-Hex file of current Program",False) - If bRetVal = True Then - ParmeterCnt = ParameterObj.ParameterCount - If ParmeterCnt = 0 Then - MsgBox "Number of parameters wrong " & ParmeterCnt - Exit Sub - End If - If ( ParmeterCnt Mod 2 ) <> 0 Then - MsgBox "Number of parameters wrong " & ParmeterCnt - Exit Sub - End If - RangeCnt = ParmeterCnt/2 - ParamIndex = 0 - For Range = 0 To RangeCnt -1 - Address = CLng(ParameterObj.Parameter(ParamIndex)) - Length = CLng(ParameterObj.Parameter(ParamIndex +1)) - ParamIndex = ParamIndex +2 - DisASMObj.AddRange Address,Length,0 - Next - DisASMObj.HexFileModeFlag = True - DisASMObj.WriteAllRanges(False) - End If - -End Sub - -'_______________________________________________________ -' -' FillByte command line function -' -' fills memory range with byte pattern -' -' command line FillByte range1,pattern1 [range2,pattern2] [range3,pattern3] ..... -' range description: -' <startaddress>,<length> -'_______________________________________________________ - -Sub FillByte(ParameterObj) - - set debugger = workspace.Coredebugger(0) - set DisASMObj = debugger.DisASMObj - If Not IsObject(ParameterObj) Then - MsgBox "Number of parameters wrong" - Exit Sub - End If - ParmeterCnt = ParameterObj.ParameterCount - If ParmeterCnt = 0 Then - MsgBox "Number of parameters wrong " & ParmeterCnt - Exit Sub - End If - If ( ParmeterCnt Mod 3 ) <> 0 Then - MsgBox "Number of parameters wrong " & ParmeterCnt - Exit Sub - End If - RangeCnt = ParmeterCnt/3 - ParamIndex = 0 - set udearrayobj = debugger.ByteArrayObj(1) - For Range = 0 To RangeCnt -1 - Address = CLng(ParameterObj.Parameter(ParamIndex)) - Length = CLng(ParameterObj.Parameter(ParamIndex +1)) - Pattern = CLng(ParameterObj.Parameter(ParamIndex +2)) - ParamIndex = ParamIndex +3 - udearrayobj.Resize(Length) - udearrayobj.Fill(Pattern) - debugger.Write Address,udearrayobj - Next - -End Sub - -'_______________________________________________________ -' -' FillWord command line function -' -' fills memory range with word pattern -' -' command line FillWord range1,pattern1 [range2,pattern2] [range3,pattern3] ..... -' range description: -' <startaddress>,<length> -'_______________________________________________________ - -Sub FillWord(ParameterObj) - - set debugger = workspace.Coredebugger(0) - set DisASMObj = debugger.DisASMObj - If Not IsObject(ParameterObj) Then - MsgBox "Number of parameters wrong" - Exit Sub - End If - ParmeterCnt = ParameterObj.ParameterCount - If ParmeterCnt = 0 Then - MsgBox "Number of parameters wrong " & ParmeterCnt - Exit Sub - End If - If ( ParmeterCnt Mod 3 ) <> 0 Then - MsgBox "Number of parameters wrong " & ParmeterCnt - Exit Sub - End If - RangeCnt = ParmeterCnt/3 - ParamIndex = 0 - set udearrayobj = debugger.WordArrayObj(1) - For Range = 0 To RangeCnt -1 - Address = CLng(ParameterObj.Parameter(ParamIndex)) - Length = CLng(ParameterObj.Parameter(ParamIndex +1)/2) - Pattern = CLng(ParameterObj.Parameter(ParamIndex +2)) - ParamIndex = ParamIndex +3 - udearrayobj.Resize(Length) - udearrayobj.Fill(Pattern) - debugger.Write Address,udearrayobj - Next - -End Sub - -'_______________________________________________________ -' -' FillDWord command line function -' -' fills memory range with dword pattern -' -' command line FillDWord range1,pattern1 [range2,pattern2] [range3,pattern3] ..... -' range description: -' <startaddress>,<length> -'_______________________________________________________ - -Sub FillDWord(ParameterObj) - - set debugger = workspace.Coredebugger(0) - set DisASMObj = debugger.DisASMObj - If Not IsObject(ParameterObj) Then - MsgBox "Number of parameters wrong" - Exit Sub - End If - ParmeterCnt = ParameterObj.ParameterCount - If ParmeterCnt = 0 Then - MsgBox "Number of parameters wrong " & ParmeterCnt - Exit Sub - End If - If ( ParmeterCnt Mod 3 ) <> 0 Then - MsgBox "Number of parameters wrong " & ParmeterCnt - Exit Sub - End If - RangeCnt = ParmeterCnt/3 - ParamIndex = 0 - set udearrayobj = debugger.DWordArrayObj(1) - For Range = 0 To RangeCnt -1 - Address = CLng(ParameterObj.Parameter(ParamIndex)) - Length = CLng(ParameterObj.Parameter(ParamIndex +1)/4) - Pattern = CLng(ParameterObj.Parameter(ParamIndex +2)) - ParamIndex = ParamIndex +3 - udearrayobj.Resize(Length) - udearrayobj.Fill(Pattern) - debugger.Write Address,udearrayobj - Next - -End Sub63VBScript24.11.2006 14:43:20:0001WS_CORE_DUOMacro_14_06_13_14_48_10_010Execute UnAss ..Macro UnAssExecute macro UnAss0210Execute SaveHEX ..Macro SaveHEXExecute macro SaveHEX0210Execute FillByte ..Macro FillByteExecute macro FillByte0110Execute FillWord ..Macro FillWordExecute macro FillWord0110Execute FillDWord ..Macro FillDWordExecute macro FillDWord0150121.11.2012 14:17:23:6457782750Target0.Controller0.Core1020.11.2012 16:19:48:3447782640Target0.Controller0.Core11021.11.2012 12:22:49:573..\main.c1,0,0,353,10940017372830Target0.Controller0.Core1114.06.2013 14:25:28:960..\..\..\os\hal\src\hal.c1,49,63,402,11570017372860Target0.Controller0.Core110214.06.2013 14:27:53:872..\..\..\os\hal\platforms\SPC5xx\SIUL_v1\pal_lld.c7372880Target0.Controller0.Core1121.11.2012 14:44:22:506..\..\..\os\kernel\src\chsys.c7372860Target0.Controller0.Core13121.11.2012 14:14:46:537AwAAAA==AQAAAA==kAAAAA==YAAAAA==TgAAAA==jQAAAA==TgAAAA==jQAAAA==TgAAAA==jgAAAA==AAAAAA==AAAAAA==AAAAAA==AAAAAA==7782520Target0.Controller0.Core10021.11.2012 14:10:10:4245380360007372850Target0.Controller0.Core10000000013.06.2013 16:10:26:035000013.06.2013 16:20:21:757<_ExtentX type="bin" size="8">UEoAAA==<_ExtentY type="bin" size="8">gysAAA==<_StockProps type="bin" size="8">AAAAAA==AgAAAA==UABDAAAAUABDAAAAAAAAAA==YAAAAA==RgB1AG4AYwB0AGkAbwBuAAAARgB1AG4AYwB0AGkAbwBuAAAAAAAAAA==QAYAAA==7372890Target0.Controller0.Core1OFF0..\build11..\build\ch.elf<Section>C:\ChibiStudio\chibios\os\kernel\src\chevents.c1Software;enabled;0;disabled;'main {C:\ChibiStudio\chibios\demos\PPC-SPC560D-GCC\main.c} .164';main.c;1;0;;$disabled; ;disabled; ;100111100verify.txt0000000004..\..\..\..\os\ports\GCC\PPC\chcore.c..\..\..\..\os\kernel\src\chsys.c..\..\..\..\os\hal\platforms\SPC5xx\DSPI_v1\spi_lld.c..\main.cstm_xpc560b_spc560d40_minimodule_debug_jtag.cfg14.06.2013 14:48:09:999 diff --git a/testhal/SPC560Dxx/SPI/UDE/stm_xpc560b_spc560d40_minimodule_debug_jtag.cfg b/testhal/SPC560Dxx/SPI/UDE/stm_xpc560b_spc560d40_minimodule_debug_jtag.cfg deleted file mode 100644 index ca4a75aa0..000000000 --- a/testhal/SPC560Dxx/SPI/UDE/stm_xpc560b_spc560d40_minimodule_debug_jtag.cfg +++ /dev/null @@ -1,160 +0,0 @@ -[Main] -Signature=UDE_TARGINFO_2.0 -Description=STM XPC560B Mini Module with SPC560D40 (Jtag) -Description1=PLL set for 48MHz -Description2=FLASH programming prepared but not enabled -Description3=Write Filter for BAM Module -MCUs=Controller0 -Architecture=PowerPC -Vendor=STM -Board=XPC560B Mini Module - -[Controller0] -Family=PowerPC -Type=SPC560D40 -Enabled=1 -IntClock=48000 -MemDevs=BAMWriteFilter -ExtClock=8000 - -[Controller0.Core] -Protocol=PPCJTAG -Enabled=1 - -[Controller0.Core.LoadedAddOn] -UDEMemtool=1 - -[Controller0.Core.PpcJtagTargIntf] -PortType=FTDI -ResetWaitTime=50 -MaxJtagClk=2500 -DoSramInit=1 -UseNexus=1 -AdaptiveJtagPhaseShift=1 -ConnOption=Default -ChangeJtagClk=10000 -HaltAfterReset=1 -SimioAddr=g_JtagSimioAccess -FreezeTimers=1 -InvalidTlbOnReset=0 -InvalidateCache=0 -ForceCacheFlush=0 -IgnoreLockedLines=0 -ExecInitCmds=1 -JtagTapNumber=0 -JtagNumOfTaps=1 -JtagNumIrBefore=0 -JtagNumIrAfter=0 - -SimioAddr=g_JtagSimioAccess - -FlushCache=0 -AllowMmuSetup=1 -UseExtReset=1 -HandleWdtBug=0 -ForceEndOfReset=0 -JtagViaPod=0 -AllowResetOnCheck=0 -ChangeMsr=0 -ChangeMsrValue=0x0 -ExecOnStartCmds=0 -ExecOnHaltCmds=0 -TargetPort=Default -EnableProgramTimeMeasurement=0 -UseHwResetMode=0 -HandleNexusAccessBug=0 -DoNotEnableTrapSwBrp=0 -CommDevSel=PortType=USB,Type=FTDI -BootPasswd0=0xFEEDFACE -BootPasswd1=0xCAFEBEEF -BootPasswd2=0xFFFFFFFF -BootPasswd3=0xFFFFFFFF -BootPasswd4=0xFFFFFFFF -BootPasswd5=0xFFFFFFFF -BootPasswd6=0xFFFFFFFF -BootPasswd7=0xFFFFFFFF -JtagIoType=Jtag -ExecOnHaltCmdsWhileHalted=0 -TimerForPTM=Default -AllowBreakOnUpdateBreakpoints=0 -ClearDebugStatusOnHalt=1 -HwResetMode=Simulate -UseMasterNexusIfResetState=1 -UseLocalAddressTranslation=1 -Use64BitNexus=0 -InitSramOnlyWhenNotInitialized=0 -AllowHarrForUpdateDebugRegs=0 -DisableE2EECC=0 -UseCore0ForNexusMemoryAccessWhileRunning=0 - -[Controller0.Core.PpcJtagTargIntf.InitScript] -// setup IVOPR -// points to internal memory at 0x40000000 -SETSPR 0x3F 0x40000000 0xFFFFFFFF - -// disable watchdog -SET SWT_SR 0xC520 -SET SWT_SR 0xD928 -SET SWT_CR 0xFF00000A - -// Oscillator select -SET CGM_OCDS_SC 0x1000000 -SET CGM_OC_EN 0x1 - -// enable all modes -SET ME_MER 0x5FF - -// run mode -SET ME_DRUN_MC 0x1F0032 -SET ME_RUN_PC0 0xFE - -// enable peripherals in run and low power modes -SET ME_LP_PC0 0x500 - -// enable clocks -SET8 CGM_SC_DC0 0x80 -SET8 CGM_SC_DC1 0x80 -SET8 CGM_SC_DC2 0x80 - -// setup clock monitor -SET CMU_CSR 0x6 -SET CMU_LFREFR 0x1 -SET CMU_HFREFR 0xFFE - -// Make DRUN configuration active -SET ME_MCTL 0x30005AF0 -SET ME_MCTL 0x3000A50F -WAIT 0x5 - -// setup pll to 48MHz -SET FMPLL_CR 0x5300041 0xFFFFFFFF -// run mode -SET ME_DRUN_MC 0x1F00F4 - -// Make DRUN configuration active -SET ME_MCTL 0x30005AF0 -SET ME_MCTL 0x3000A50F -WAIT 0x5 - -// setup SSCM erro cfg for debug -SET16 SSCM_ERROR 0x3 0x3 - -[Controller0.BAMWriteFilter] -Description=BAM WriteAccess Filter -Range0Start=0xFFFFC000 -Range0Size=0x4000 -Enabled=1 -Handler=AccessFilter -Mode=ReadOnly - -[Controller0.PFLASH] -Enabled=1 -EnableMemtoolByDefault=1 - -[Controller0.DFLASH] -Enabled=1 -EnableMemtoolByDefault=1 - -[Controller0.Core.PpcJtagTargIntf.OnStartScript] - -[Controller0.Core.PpcJtagTargIntf.OnHaltScript] diff --git a/testhal/SPC560Dxx/SPI/chconf.h b/testhal/SPC560Dxx/SPI/chconf.h deleted file mode 100644 index dc956ef13..000000000 --- a/testhal/SPC560Dxx/SPI/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/SPC560Dxx/SPI/halconf.h b/testhal/SPC560Dxx/SPI/halconf.h deleted file mode 100644 index fdc079aef..000000000 --- a/testhal/SPC560Dxx/SPI/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/SPC560Dxx/SPI/main.c b/testhal/SPC560Dxx/SPI/main.c deleted file mode 100644 index f6aa96abe..000000000 --- a/testhal/SPC560Dxx/SPI/main.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * Maximum speed SPI configuration. - */ -static const SPIConfig hs_spicfg = { - NULL, - 0, - 0, - SPC5_CTAR_CSSCK_DIV2 | SPC5_CTAR_ASC_DIV2 | SPC5_CTAR_FMSZ(8) | - SPC5_CTAR_PBR_PRE2 | SPC5_CTAR_BR_DIV2, /* CTAR0. */ - SPC5_PUSHR_CONT | SPC5_PUSHR_PCS(1) /* PUSHR. */ -}; - -/* - * Low speed SPI configuration. - */ -static const SPIConfig ls_spicfg = { - NULL, - 0, - 0, - SPC5_CTAR_CSSCK_DIV64 | SPC5_CTAR_ASC_DIV64 | SPC5_CTAR_FMSZ(8) | - SPC5_CTAR_PBR_PRE2 | SPC5_CTAR_BR_DIV256, /* CTAR0. */ - SPC5_PUSHR_CONT | SPC5_PUSHR_PCS(0) /* PUSHR. */ -}; - -/* - * SPI TX and RX buffers. - */ -static uint8_t txbuf[512]; -static uint8_t rxbuf[512]; - -/* - * SPI bus contender 1. - */ -static WORKING_AREA(spi_thread_1_wa, 256); -static msg_t spi_thread_1(void *p) { - - (void)p; - chRegSetThreadName("SPI thread 1"); - while (TRUE) { - spiAcquireBus(&SPID1); /* Acquire ownership of the bus. */ - palClearPad(PORT_E, PE_LED1); /* LED ON. */ - spiStart(&SPID1, &hs_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID1); /* Slave Select assertion. */ - spiExchange(&SPID1, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID1); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID1); /* Ownership release. */ - } - return 0; -} - -/* - * SPI bus contender 2. - */ -static WORKING_AREA(spi_thread_2_wa, 256); -static msg_t spi_thread_2(void *p) { - - (void)p; - chRegSetThreadName("SPI thread 2"); - while (TRUE) { - spiAcquireBus(&SPID1); /* Acquire ownership of the bus. */ - palSetPad(PORT_E, PE_LED1); /* LED OFF. */ - spiStart(&SPID1, &ls_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID1); /* Slave Select assertion. */ - spiExchange(&SPID1, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID1); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID1); /* Ownership release. */ - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Prepare transmit pattern. - */ - for (i = 0; i < sizeof(txbuf); i++) - txbuf[i] = (uint8_t)i; - - /* Starting driver for test, DSPI_1 I/O pins setup.*/ - spiStart(&SPID1, &ls_spicfg); - SIU.PCR[14].R = PAL_MODE_OUTPUT_ALTERNATE(1); /* SCK */ - SIU.PCR[13].R = PAL_MODE_OUTPUT_ALTERNATE(1); /* SOUT */ - SIU.PCR[15].R = PAL_MODE_OUTPUT_ALTERNATE(1); /* CS[0] */ - SIU.PCR[28].R = PAL_MODE_OUTPUT_ALTERNATE(3); /* CS[1] */ - - /* Testing sending and receiving at the same time.*/ - spiExchange(&SPID1, 4, txbuf, rxbuf); - spiExchange(&SPID1, 32, txbuf, rxbuf); - spiExchange(&SPID1, 512, txbuf, rxbuf); - - /* Testing clock pulses without data buffering.*/ - spiIgnore(&SPID1, 4); - spiIgnore(&SPID1, 32); - - /* Testing sending data ignoring incoming data.*/ - spiSend(&SPID1, 4, txbuf); - spiSend(&SPID1, 32, txbuf); - - /* Testing receiving data while sending idle bits (high level).*/ - spiReceive(&SPID1, 4, rxbuf); - spiReceive(&SPID1, 32, rxbuf); - - /* Testing stop procedure.*/ - spiStop(&SPID1); - - /* - * Starting the transmitter and receiver threads. - */ - chThdCreateStatic(spi_thread_1_wa, sizeof(spi_thread_1_wa), - NORMALPRIO + 1, spi_thread_1, NULL); - chThdCreateStatic(spi_thread_2_wa, sizeof(spi_thread_2_wa), - NORMALPRIO + 1, spi_thread_2, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - palTogglePad(PORT_E, PE_LED2); - } - return 0; -} diff --git a/testhal/SPC560Dxx/SPI/mcuconf.h b/testhal/SPC560Dxx/SPI/mcuconf.h deleted file mode 100644 index 166be874b..000000000 --- a/testhal/SPC560Dxx/SPI/mcuconf.h +++ /dev/null @@ -1,230 +0,0 @@ -/* - SPC5 HAL - Copyright (C) 2013 STMicroelectronics - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * SPC560B/Cxx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 1...15 Lowest...Highest. - * DMA priorities: - * 0...15 Highest...Lowest. - */ - -#define SPC560Dxx_MCUCONF - -/* - * HAL driver system settings. - */ -#define SPC5_NO_INIT FALSE -#define SPC5_ALLOW_OVERCLOCK FALSE -#define SPC5_DISABLE_WATCHDOG TRUE -#define SPC5_FMPLL0_IDF_VALUE 1 -#define SPC5_FMPLL0_NDIV_VALUE 48 -#define SPC5_FMPLL0_ODF SPC5_FMPLL_ODF_DIV8 -#define SPC5_XOSCDIV_VALUE 1 -#define SPC5_IRCDIV_VALUE 1 -#define SPC5_PERIPHERAL1_CLK_DIV_VALUE 2 -#define SPC5_PERIPHERAL2_CLK_DIV_VALUE 2 -#define SPC5_PERIPHERAL3_CLK_DIV_VALUE 2 -#define SPC5_ME_ME_BITS (SPC5_ME_ME_RUN1 | \ - SPC5_ME_ME_RUN2 | \ - SPC5_ME_ME_RUN3 | \ - SPC5_ME_ME_HALT0 | \ - SPC5_ME_ME_STOP0 | \ - SPC5_ME_ME_STANDBY0) -#define SPC5_ME_TEST_MC_BITS (SPC5_ME_MC_SYSCLK_IRC | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_SAFE_MC_BITS (SPC5_ME_MC_PDO) -#define SPC5_ME_DRUN_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN1_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN2_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN3_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_HALT0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_STOP0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_STANDBY0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN_PC0_BITS 0 -#define SPC5_ME_RUN_PC1_BITS (SPC5_ME_RUN_PC_TEST | \ - SPC5_ME_RUN_PC_SAFE | \ - SPC5_ME_RUN_PC_DRUN | \ - SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC2_BITS (SPC5_ME_RUN_PC_DRUN | \ - SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC3_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC4_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC5_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC6_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC7_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_LP_PC0_BITS 0 -#define SPC5_ME_LP_PC1_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0 | \ - SPC5_ME_LP_PC_STANDBY0) -#define SPC5_ME_LP_PC2_BITS (SPC5_ME_LP_PC_HALT0) -#define SPC5_ME_LP_PC3_BITS (SPC5_ME_LP_PC_STOP0) -#define SPC5_ME_LP_PC4_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_ME_LP_PC5_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_ME_LP_PC6_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_ME_LP_PC7_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_PIT0_IRQ_PRIORITY 4 -#define SPC5_CLOCK_FAILURE_HOOK() chSysHalt() - -/* - * EDMA driver settings. - */ -#define SPC5_EDMA_CR_SETTING 0 -#define SPC5_EDMA_GROUP0_PRIORITIES \ - 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 -#define SPC5_EDMA_ERROR_IRQ_PRIO 2 -#define SPC5_EDMA_ERROR_HANDLER() chSysHalt() - -/* - * SERIAL driver system settings. - */ -#define SPC5_SERIAL_USE_LINFLEX0 TRUE -#define SPC5_SERIAL_USE_LINFLEX1 TRUE -#define SPC5_SERIAL_USE_LINFLEX2 TRUE -#define SPC5_SERIAL_LINFLEX0_PRIORITY 8 -#define SPC5_SERIAL_LINFLEX1_PRIORITY 8 -#define SPC5_SERIAL_LINFLEX2_PRIORITY 8 -#define SPC5_SERIAL_LINFLEX0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SERIAL_LINFLEX0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) -#define SPC5_SERIAL_LINFLEX1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SERIAL_LINFLEX1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) -#define SPC5_SERIAL_LINFLEX2_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SERIAL_LINFLEX2_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -/* - * SPI driver system settings. - */ -#define SPC5_SPI_USE_DSPI0 TRUE -#define SPC5_SPI_USE_DSPI1 TRUE -#define SPC5_SPI_DSPI0_MCR (SPC5_MCR_PCSIS0 | \ - SPC5_MCR_PCSIS1 | \ - SPC5_MCR_PCSIS2 | \ - SPC5_MCR_PCSIS3 | \ - SPC5_MCR_PCSIS4 | \ - SPC5_MCR_PCSIS5 | \ - SPC5_MCR_PCSIS6 | \ - SPC5_MCR_PCSIS7) -#define SPC5_SPI_DSPI1_MCR (SPC5_MCR_PCSIS0 | \ - SPC5_MCR_PCSIS1 | \ - SPC5_MCR_PCSIS2 | \ - SPC5_MCR_PCSIS3 | \ - SPC5_MCR_PCSIS4 | \ - SPC5_MCR_PCSIS5 | \ - SPC5_MCR_PCSIS6 | \ - SPC5_MCR_PCSIS7) -#define SPC5_SPI_DSPI0_DMA_IRQ_PRIO 10 -#define SPC5_SPI_DSPI1_DMA_IRQ_PRIO 10 -#define SPC5_SPI_DSPI0_IRQ_PRIO 10 -#define SPC5_SPI_DSPI1_IRQ_PRIO 10 -#define SPC5_SPI_DMA_ERROR_HOOK(spip) chSysHalt() -#define SPC5_SPI_DSPI0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SPI_DSPI0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) -#define SPC5_SPI_DSPI1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SPI_DSPI1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) diff --git a/testhal/SPC560Dxx/SPI/readme.txt b/testhal/SPC560Dxx/SPI/readme.txt deleted file mode 100644 index baa32f272..000000000 --- a/testhal/SPC560Dxx/SPI/readme.txt +++ /dev/null @@ -1,25 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - SPI driver demo for SPC560Dxx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics SPC560Dxx microcontroller installed on -XPC56xx EVB Motherboard. - -** The Demo ** - -The application demonstrates the use of the SPC560Dxx SPI driver. - -** Board Setup ** - -** Build Procedure ** - -The demo has been tested using HighTec compiler. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. - - http://www.st.com diff --git a/testhal/SPC560Pxx/CAN/.cproject b/testhal/SPC560Pxx/CAN/.cproject deleted file mode 100644 index 18c26cafe..000000000 --- a/testhal/SPC560Pxx/CAN/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/SPC560Pxx/CAN/.project b/testhal/SPC560Pxx/CAN/.project deleted file mode 100644 index 4c2d806c5..000000000 --- a/testhal/SPC560Pxx/CAN/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - SPC560Pxx-PWM-ICU - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_EVB_SPC560P - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/SPC560Pxx/CAN/Makefile b/testhal/SPC560Pxx/CAN/Makefile deleted file mode 100644 index 33ab47686..000000000 --- a/testhal/SPC560Pxx/CAN/Makefile +++ /dev/null @@ -1,140 +0,0 @@ -############################################################################## -# This file is automatically generated and can be overwritten, do no change -# this file manually. -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data. -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in VLE mode. -ifeq ($(USE_VLE),) - USE_VLE = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = out - -# Imported source files -include components/components.mak - -# Checks if there is a user mak file in the project directory. -ifneq ($(wildcard user.mak),) - include user.mak -endif - -# Define linker script file here -LDSCRIPT= application.ld - -# C sources here. -CSRC = $(LIB_C_SRC) \ - $(APP_C_SRC) \ - $(U_C_SRC) \ - ./components/components.c \ - ./main.c - -# C++ sources here. -CPPSRC = $(LIB_CPP_SRC) \ - $(APP_CPP_SRC) \ - $(U_CPP_SRC) - -# List ASM source files here -ASMSRC = $(LIB_ASM_SRC) \ - $(APP_ASM_SRC) \ - $(U_ASM_SRC) - -INCDIR = $(LIB_INCLUDES) \ - $(APP_INCLUDES) \ - ./components - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -#MCU = e500mc -meabi -msdata=none -mnew-mnemonics -mregnames -MCU = e200zx -meabi -msdata=none -mnew-mnemonics -mregnames - -TRGT = ppc-vle- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = -DSPC560P50L5 - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -include C:/SPC5Studio/eclipse/plugins/com.st.tools.spc5.components.platform.spc560pxx_1.0.0.201302201417/component/lib/rsc/rules.mk diff --git a/testhal/SPC560Pxx/CAN/chconf.h b/testhal/SPC560Pxx/CAN/chconf.h deleted file mode 100644 index 8800269d4..000000000 --- a/testhal/SPC560Pxx/CAN/chconf.h +++ /dev/null @@ -1,529 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010, - 2011,2012,2013 Giovanni Di Sirio. - - This file is part of ChibiOS/RT. - - ChibiOS/RT is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS/RT is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE FALSE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/SPC560Pxx/CAN/halconf.h b/testhal/SPC560Pxx/CAN/halconf.h deleted file mode 100644 index c316bb385..000000000 --- a/testhal/SPC560Pxx/CAN/halconf.h +++ /dev/null @@ -1,371 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010, - 2011,2012,2013 Giovanni Di Sirio. - - This file is part of ChibiOS/RT. - - ChibiOS/RT is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS/RT is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @name Drivers enable switches - */ -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN TRUE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name ADC driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION FALSE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name CAN driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE FALSE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name I2C driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION FALSE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name MAC driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name MMC_SPI driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name SDC driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 1 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name SERIAL driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name SERIAL_USB driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 64 -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name SPI driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION FALSE -#endif -/** @} */ - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/SPC560Pxx/CAN/main.c b/testhal/SPC560Pxx/CAN/main.c deleted file mode 100644 index b60729765..000000000 --- a/testhal/SPC560Pxx/CAN/main.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -struct can_instance { - CANDriver *canp; - uint32_t led; -}; - -static const struct can_instance can1 = {&CAND1, PD_LED1}; - -/* - * Internal loopback mode, 500kBaud. - * See chapter 25 on the SPC5 reference manual. - */ -static const CANConfig cancfg = { - CAN_MCR_WRN_EN, - CAN_CTRL_LPB | CAN_CTRL_PROPSEG(2) | CAN_CTRL_PSEG2(7) | - CAN_CTRL_PSEG1(3) | CAN_CTRL_PRESDIV(3) -#if SPC5_CAN_USE_FILTERS - , - { - {0, 0x00000001}, - {1, 0x01234567}, - {0, 0x00000000}, - {0, 0x00000003}, - {0, 0x00000004}, - {0, 0x00000005}, - {0, 0x00000006}, - {0, 0x00000007} - } -#endif -}; - -#if SPC5_CAN_USE_FILTERS -flagsmask_t rxFlag; -#endif - -/* - * Receiver thread. - */ -static WORKING_AREA(can_rx_wa, 256); -static msg_t can_rx(void *p) { - struct can_instance *cip = p; - EventListener el; - CANRxFrame rxmsg; - (void)p; - chRegSetThreadName("receiver"); - chEvtRegister(&cip->canp->rxfull_event, &el, 0); -#if SPC5_CAN_USE_FILTERS - rxFlag = chEvtGetAndClearFlagsI(&el); -#endif - while(!chThdShouldTerminate()) { - if (chEvtWaitAnyTimeout(ALL_EVENTS, MS2ST(100)) == 0) - continue; -#if !SPC5_CAN_USE_FILTERS - while (canReceive(cip->canp, CAN_ANY_MAILBOX, - &rxmsg, TIME_IMMEDIATE) == RDY_OK) { - /* Process message.*/ - palTogglePad(PORT_D, cip->led); - } -#else - while (canReceive(cip->canp, rxFlag, - &rxmsg, TIME_IMMEDIATE) == RDY_OK) { - /* Process message.*/ - palTogglePad(PORT_D, cip->led); - } -#endif - } - chEvtUnregister(&CAND1.rxfull_event, &el); - return 0; -} - -/* - * Transmitter thread. - */ -static WORKING_AREA(can_tx_wa, 256); -static msg_t can_tx(void * p) { - CANTxFrame txmsg; - - (void)p; - chRegSetThreadName("transmitter"); - txmsg.IDE = CAN_IDE_EXT; - txmsg.EID = 0x01234567; - txmsg.RTR = CAN_RTR_DATA; - txmsg.LENGTH = 8; - txmsg.data32[0] = 0x55AA55AA; - txmsg.data32[1] = 0x00FF00FF; - - while (!chThdShouldTerminate()) { - canTransmit(&CAND1, 1, &txmsg, MS2ST(100)); - palTogglePad(PORT_D, PD_LED2); - chThdSleepMilliseconds(500); - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the CAN driver 1. - */ - canStart(&CAND1, &cancfg); - - /* - * Starting the transmitter and receiver threads. - */ - chThdCreateStatic(can_rx_wa, sizeof(can_rx_wa), NORMALPRIO + 7, - can_rx, (void *)&can1); - chThdCreateStatic(can_tx_wa, sizeof(can_tx_wa), NORMALPRIO + 7, - can_tx, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} - diff --git a/testhal/SPC560Pxx/CAN/mcuconf.h b/testhal/SPC560Pxx/CAN/mcuconf.h deleted file mode 100644 index bdd11f6ae..000000000 --- a/testhal/SPC560Pxx/CAN/mcuconf.h +++ /dev/null @@ -1,190 +0,0 @@ -/* - * Licensed under ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -/* - * SPC560Pxx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 1...15 Lowest...Highest. - */ - -#define SPC560Pxx_MCUCONF - -/* - * HAL driver system settings. - */ -#define SPC5_NO_INIT FALSE -#define SPC5_ALLOW_OVERCLOCK FALSE -#define SPC5_DISABLE_WATCHDOG TRUE -#define SPC5_FMPLL0_IDF_VALUE 5 -#define SPC5_FMPLL0_NDIV_VALUE 32 -#define SPC5_FMPLL0_ODF SPC5_FMPLL_ODF_DIV4 -#define SPC5_FMPLL1_IDF_VALUE 5 -#define SPC5_FMPLL1_NDIV_VALUE 60 -#define SPC5_FMPLL1_ODF SPC5_FMPLL_ODF_DIV4 -#define SPC5_AUX0CLK_SRC SPC5_CGM_SS_FMPLL1 -#define SPC5_MCONTROL_DIVIDER_VALUE 2 -#define SPC5_FMPLL1_CLK_DIVIDER_VALUE 2 -#define SPC5_AUX2CLK_SRC SPC5_CGM_SS_FMPLL1 -#define SPC5_SP_CLK_DIVIDER_VALUE 2 -#define SPC5_AUX3CLK_SRC SPC5_CGM_SS_FMPLL1 -#define SPC5_FR_CLK_DIVIDER_VALUE 2 -#define SPC5_ME_ME_BITS (SPC5_ME_ME_RUN1 | \ - SPC5_ME_ME_RUN2 | \ - SPC5_ME_ME_RUN3 | \ - SPC5_ME_ME_HALT0 | \ - SPC5_ME_ME_STOP0) -#define SPC5_ME_TEST_MC_BITS (SPC5_ME_MC_SYSCLK_IRC | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_SAFE_MC_BITS (SPC5_ME_MC_PDO) -#define SPC5_ME_DRUN_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN1_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN2_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN3_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_HALT0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_STOP0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN_PC3_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC4_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC5_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC6_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC7_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_LP_PC4_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_ME_LP_PC5_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_ME_LP_PC6_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_ME_LP_PC7_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_PIT0_IRQ_PRIORITY 4 -#define SPC5_CLOCK_FAILURE_HOOK() chSysHalt() - -/* - * SERIAL driver system settings. - */ -#define SPC5_SERIAL_USE_LINFLEX0 TRUE -#define SPC5_SERIAL_USE_LINFLEX1 TRUE -#define SPC5_SERIAL_LINFLEX0_PRIORITY 8 -#define SPC5_SERIAL_LINFLEX1_PRIORITY 8 -#define SPC5_SERIAL_LINFLEX0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SERIAL_LINFLEX0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) -#define SPC5_SERIAL_LINFLEX1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SERIAL_LINFLEX1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -/* - * PWM driver system settings. - */ -#define SPC5_PWM_USE_SMOD0 TRUE -#define SPC5_PWM_USE_SMOD1 FALSE -#define SPC5_PWM_USE_SMOD2 FALSE -#define SPC5_PWM_USE_SMOD3 FALSE -#define SPC5_PWM_SMOD0_PRIORITY 7 -#define SPC5_PWM_SMOD1_PRIORITY 7 -#define SPC5_PWM_SMOD2_PRIORITY 7 -#define SPC5_PWM_SMOD3_PRIORITY 7 -#define SPC5_PWM_FLEXPWM0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_PWM_FLEXPWM0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -/* - * CAN driver system settings. - */ -#define SPC5_CAN_USE_FILTERS TRUE - -#define SPC5_CAN_USE_FLEXCAN0 TRUE -#define SPC5_CAN_FLEXCAN0_PRIORITY 11 -#define SPC5_CAN_FLEXCAN0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_CAN_FLEXCAN0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) diff --git a/testhal/SPC560Pxx/CAN/readme.txt b/testhal/SPC560Pxx/CAN/readme.txt deleted file mode 100644 index b5587dd29..000000000 --- a/testhal/SPC560Pxx/CAN/readme.txt +++ /dev/null @@ -1,27 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - CAN drivers demo for SPC560Pxx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics SPC560Pxx microcontroller installed on -XPC56xx EVB Motherboard. - -** The Demo ** - -The application demonstrates the use of the SPC560Pxx CAN drivers. - -** Board Setup ** - -- Enable LED1 and LED2. - -** Build Procedure ** - -The demo has been tested using HighTec compiler. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. - - http://www.st.com diff --git a/testhal/SPC560Pxx/PWM-ICU/.cproject b/testhal/SPC560Pxx/PWM-ICU/.cproject deleted file mode 100644 index 18c26cafe..000000000 --- a/testhal/SPC560Pxx/PWM-ICU/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/SPC560Pxx/PWM-ICU/.project b/testhal/SPC560Pxx/PWM-ICU/.project deleted file mode 100644 index 4c2d806c5..000000000 --- a/testhal/SPC560Pxx/PWM-ICU/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - SPC560Pxx-PWM-ICU - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_EVB_SPC560P - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/SPC560Pxx/PWM-ICU/Makefile b/testhal/SPC560Pxx/PWM-ICU/Makefile deleted file mode 100644 index 1bdaed928..000000000 --- a/testhal/SPC560Pxx/PWM-ICU/Makefile +++ /dev/null @@ -1,167 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data. -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# If enabled, this option allows to compile the application in VLE mode. -ifeq ($(USE_VLE),) - USE_VLE = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_EVB_SPC560P/board.mk -include $(CHIBIOS)/os/hal/platforms/SPC560Pxx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/PPC/SPC560Pxx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/SPC560P50.ld - -# C sources here. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - $(CHIBIOS)/os/various/shell.c \ - $(CHIBIOS)/os/various/chprintf.c \ - main.c - -# C++ sources here. -CPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -#MCU = e500mc -meabi -msdata=none -mnew-mnemonics -mregnames -MCU = e200zx -meabi -msdata=none -mnew-mnemonics -mregnames - -#TRGT = powerpc-eabi- -TRGT = ppc-vle- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = -D_SPC560P50L5_ - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -include $(CHIBIOS)/os/ports/GCC/PPC/rules.mk diff --git a/testhal/SPC560Pxx/PWM-ICU/chconf.h b/testhal/SPC560Pxx/PWM-ICU/chconf.h deleted file mode 100644 index c132ac014..000000000 --- a/testhal/SPC560Pxx/PWM-ICU/chconf.h +++ /dev/null @@ -1,525 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE FALSE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/SPC560Pxx/PWM-ICU/halconf.h b/testhal/SPC560Pxx/PWM-ICU/halconf.h deleted file mode 100644 index 09022b9e7..000000000 --- a/testhal/SPC560Pxx/PWM-ICU/halconf.h +++ /dev/null @@ -1,367 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @name Drivers enable switches - */ -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU TRUE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name ADC driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION FALSE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name CAN driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name I2C driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION FALSE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name MAC driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name MMC_SPI driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name SDC driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 1 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name SERIAL driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name SERIAL_USB driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 64 -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name SPI driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION FALSE -#endif -/** @} */ - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/SPC560Pxx/PWM-ICU/main.c b/testhal/SPC560Pxx/PWM-ICU/main.c deleted file mode 100644 index 31ef444ee..000000000 --- a/testhal/SPC560Pxx/PWM-ICU/main.c +++ /dev/null @@ -1,140 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void pwmpcb(PWMDriver *pwmp) { - - (void)pwmp; - palClearPad(PORT_D, PD_LED1); -} - -static void pwmc1cb(PWMDriver *pwmp) { - - (void)pwmp; - palSetPad(PORT_D, PD_LED1); -} - -static PWMConfig pwmcfg = { - 250000, /* 250kHz PWM clock frequency.*/ - 50000, /* Initial PWM period 0.2s.*/ - pwmpcb, - { - {PWM_OUTPUT_ACTIVE_HIGH, pwmc1cb}, - {PWM_OUTPUT_DISABLED, NULL} - }, - PWM_ALIGN_EDGE -}; - -icucnt_t last_width, last_period; - -static void icuwidthcb(ICUDriver *icup) { - - palSetPad(PORT_D, PD_LED2); - last_width = icuGetWidth(icup); -} - -static void icuperiodcb(ICUDriver *icup) { - - palClearPad(PORT_D, PD_LED2); - last_period = icuGetPeriod(icup); -} - -static ICUConfig icucfg = { - ICU_INPUT_ACTIVE_HIGH, - 250000, /* 250kHz ICU clock frequency.*/ - icuwidthcb, - icuperiodcb, - NULL -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes the PWM driver 1 and ICU driver 1. - * GPIOD10 is the PWM output. - * GPIOA0 is the ICU input. - * The two pins have to be externally connected together. - */ - icuStart(&ICUD1, &icucfg); - icuEnable(&ICUD1); - - /* Sets A0 alternative function.*/ - SIU.PCR[0].R = 0b0100010100000100; - - pwmStart(&PWMD1, &pwmcfg); - /* Sets D10 alternative function.*/ - SIU.PCR[58].R = 0b0100010100000100; - - chThdSleepMilliseconds(2000); - - /* - * Starts the PWM channel 0 using 75% duty cycle. - */ - pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 7500)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 50% duty cycle. - */ - pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 5000)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 25% duty cycle. - */ - pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 2500)); - chThdSleepMilliseconds(5000); - - /* - * Changes PWM period and the PWM channel 0 to 50% duty cycle. - */ - pwmChangePeriod(&PWMD1, 25000); - pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 5000)); - chThdSleepMilliseconds(5000); - - /* - * Disables channel 0 and stops the drivers. - */ - pwmDisableChannel(&PWMD1, 0); - pwmStop(&PWMD1); - icuDisable(&ICUD1); - icuStop(&ICUD1); - palClearPad(PORT_D, PD_LED3); - palClearPad(PORT_D, PD_LED4); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/SPC560Pxx/PWM-ICU/mcuconf.h b/testhal/SPC560Pxx/PWM-ICU/mcuconf.h deleted file mode 100644 index ae770ef86..000000000 --- a/testhal/SPC560Pxx/PWM-ICU/mcuconf.h +++ /dev/null @@ -1,298 +0,0 @@ -/* - SPC5 HAL - Copyright (C) 2013 STMicroelectronics - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * SPC560Pxx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 1...15 Lowest...Highest. - * DMA priorities: - * 0...15 Highest...Lowest. - */ - -#define SPC560Pxx_MCUCONF - -/* - * HAL driver system settings. - */ -#define SPC5_NO_INIT FALSE -#define SPC5_ALLOW_OVERCLOCK FALSE -#define SPC5_DISABLE_WATCHDOG TRUE -#define SPC5_FMPLL0_IDF_VALUE 5 -#define SPC5_FMPLL0_NDIV_VALUE 32 -#define SPC5_FMPLL0_ODF SPC5_FMPLL_ODF_DIV4 -#define SPC5_FMPLL1_IDF_VALUE 5 -#define SPC5_FMPLL1_NDIV_VALUE 60 -#define SPC5_FMPLL1_ODF SPC5_FMPLL_ODF_DIV4 -#define SPC5_AUX0CLK_SRC SPC5_CGM_SS_FMPLL0 -#define SPC5_MCONTROL_DIVIDER_VALUE 2 -#define SPC5_FMPLL1_CLK_DIVIDER_VALUE 2 -#define SPC5_AUX2CLK_SRC SPC5_CGM_SS_FMPLL1 -#define SPC5_SP_CLK_DIVIDER_VALUE 2 -#define SPC5_AUX3CLK_SRC SPC5_CGM_SS_FMPLL1 -#define SPC5_FR_CLK_DIVIDER_VALUE 2 -#define SPC5_ME_ME_BITS (SPC5_ME_ME_RUN1 | \ - SPC5_ME_ME_RUN2 | \ - SPC5_ME_ME_RUN3 | \ - SPC5_ME_ME_HALT0 | \ - SPC5_ME_ME_STOP0) -#define SPC5_ME_TEST_MC_BITS (SPC5_ME_MC_SYSCLK_IRC | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_SAFE_MC_BITS (SPC5_ME_MC_PDO) -#define SPC5_ME_DRUN_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN1_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN2_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN3_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_HALT0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_STOP0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN_PC3_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC4_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC5_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC6_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC7_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_LP_PC4_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_ME_LP_PC5_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_ME_LP_PC6_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_ME_LP_PC7_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_PIT0_IRQ_PRIORITY 4 -#define SPC5_CLOCK_FAILURE_HOOK() chSysHalt() - -/* - * EDMA driver settings. - */ -#define SPC5_EDMA_CR_SETTING 0 -#define SPC5_EDMA_GROUP0_PRIORITIES \ - 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 -#define SPC5_EDMA_ERROR_IRQ_PRIO 2 -#define SPC5_EDMA_ERROR_HANDLER() chSysHalt() - -/* - * Serial driver system settings. - */ -#define SPC5_SERIAL_USE_LINFLEX0 TRUE -#define SPC5_SERIAL_USE_LINFLEX1 TRUE -#define SPC5_SERIAL_LINFLEX0_PRIORITY 8 -#define SPC5_SERIAL_LINFLEX1_PRIORITY 8 -#define SPC5_SERIAL_LINFLEX0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SERIAL_LINFLEX0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) -#define SPC5_SERIAL_LINFLEX1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SERIAL_LINFLEX1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -/* - * PWM driver system settings. - */ -#define SPC5_PWM_USE_SMOD0 TRUE -#define SPC5_PWM_USE_SMOD1 FALSE -#define SPC5_PWM_USE_SMOD2 FALSE -#define SPC5_PWM_USE_SMOD3 FALSE -#define SPC5_PWM_SMOD0_PRIORITY 7 -#define SPC5_PWM_SMOD1_PRIORITY 7 -#define SPC5_PWM_SMOD2_PRIORITY 7 -#define SPC5_PWM_SMOD3_PRIORITY 7 -#define SPC5_PWM_FLEXPWM0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_PWM_FLEXPWM0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -/* - * ICU driver system settings. - */ -#define SPC5_ICU_USE_SMOD0 TRUE -#define SPC5_ICU_USE_SMOD1 FALSE -#define SPC5_ICU_USE_SMOD2 FALSE -#define SPC5_ICU_USE_SMOD3 FALSE -#define SPC5_ICU_USE_SMOD4 FALSE -#define SPC5_ICU_USE_SMOD5 FALSE -#define SPC5_ICU_ETIMER0_PRIORITY 7 -#define SPC5_ICU_ETIMER0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_ICU_ETIMER0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -#define SPC5_ICU_USE_SMOD6 FALSE -#define SPC5_ICU_USE_SMOD7 FALSE -#define SPC5_ICU_USE_SMOD8 FALSE -#define SPC5_ICU_USE_SMOD9 FALSE -#define SPC5_ICU_USE_SMOD10 FALSE -#define SPC5_ICU_USE_SMOD11 FALSE -#define SPC5_ICU_ETIMER1_PRIORITY 7 -#define SPC5_ICU_ETIMER1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_ICU_ETIMER1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -/* - * SPI driver system settings. - */ -#define SPC5_SPI_USE_DSPI0 FALSE -#define SPC5_SPI_USE_DSPI1 FALSE -#define SPC5_SPI_USE_DSPI2 FALSE -#define SPC5_SPI_USE_DSPI3 FALSE -#define SPC5_SPI_USE_DSPI4 FALSE -#define SPC5_SPI_DSPI0_MCR (SPC5_MCR_PCSIS0 | \ - SPC5_MCR_PCSIS1 | \ - SPC5_MCR_PCSIS2 | \ - SPC5_MCR_PCSIS3 | \ - SPC5_MCR_PCSIS4 | \ - SPC5_MCR_PCSIS5 | \ - SPC5_MCR_PCSIS6 | \ - SPC5_MCR_PCSIS7) -#define SPC5_SPI_DSPI1_MCR (SPC5_MCR_PCSIS0 | \ - SPC5_MCR_PCSIS1 | \ - SPC5_MCR_PCSIS2 | \ - SPC5_MCR_PCSIS3 | \ - SPC5_MCR_PCSIS4 | \ - SPC5_MCR_PCSIS5 | \ - SPC5_MCR_PCSIS6 | \ - SPC5_MCR_PCSIS7) -#define SPC5_SPI_DSPI2_MCR (SPC5_MCR_PCSIS0 | \ - SPC5_MCR_PCSIS1 | \ - SPC5_MCR_PCSIS2 | \ - SPC5_MCR_PCSIS3 | \ - SPC5_MCR_PCSIS4 | \ - SPC5_MCR_PCSIS5 | \ - SPC5_MCR_PCSIS6 | \ - SPC5_MCR_PCSIS7) -#define SPC5_SPI_DSPI3_MCR (SPC5_MCR_PCSIS0 | \ - SPC5_MCR_PCSIS1 | \ - SPC5_MCR_PCSIS2 | \ - SPC5_MCR_PCSIS3 | \ - SPC5_MCR_PCSIS4 | \ - SPC5_MCR_PCSIS5 | \ - SPC5_MCR_PCSIS6 | \ - SPC5_MCR_PCSIS7) -#define SPC5_SPI_DSPI4_MCR (SPC5_MCR_PCSIS0 | \ - SPC5_MCR_PCSIS1 | \ - SPC5_MCR_PCSIS2 | \ - SPC5_MCR_PCSIS3 | \ - SPC5_MCR_PCSIS4 | \ - SPC5_MCR_PCSIS5 | \ - SPC5_MCR_PCSIS6 | \ - SPC5_MCR_PCSIS7) -#define SPC5_SPI_DSPI0_DMA_IRQ_PRIO 10 -#define SPC5_SPI_DSPI1_DMA_IRQ_PRIO 10 -#define SPC5_SPI_DSPI2_DMA_IRQ_PRIO 10 -#define SPC5_SPI_DSPI3_DMA_IRQ_PRIO 10 -#define SPC5_SPI_DSPI4_DMA_IRQ_PRIO 10 -#define SPC5_SPI_DSPI0_IRQ_PRIO 10 -#define SPC5_SPI_DSPI1_IRQ_PRIO 10 -#define SPC5_SPI_DSPI2_IRQ_PRIO 10 -#define SPC5_SPI_DSPI3_IRQ_PRIO 10 -#define SPC5_SPI_DSPI4_IRQ_PRIO 10 -#define SPC5_SPI_DMA_ERROR_HOOK(spip) chSysHalt() -#define SPC5_SPI_DSPI0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SPI_DSPI0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) -#define SPC5_SPI_DSPI1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SPI_DSPI1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) -#define SPC5_SPI_DSPI2_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SPI_DSPI2_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) -#define SPC5_SPI_DSPI3_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SPI_DSPI3_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) -#define SPC5_SPI_DSPI4_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SPI_DSPI4_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) diff --git a/testhal/SPC560Pxx/PWM-ICU/readme.txt b/testhal/SPC560Pxx/PWM-ICU/readme.txt deleted file mode 100644 index 025e73c87..000000000 --- a/testhal/SPC560Pxx/PWM-ICU/readme.txt +++ /dev/null @@ -1,27 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - PWM/ICU drivers demo for SPC560Pxx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics SPC560Pxx microcontroller installed on -XPC56xx EVB Motherboard. - -** The Demo ** - -The application demonstrates the use of the SPC560Pxx PWM-ICU drivers. - -** Board Setup ** - -- Connect D10 and A0 together. - -** Build Procedure ** - -The demo has been tested using HighTec compiler. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. - - http://www.st.com diff --git a/testhal/SPC560Pxx/SPI/.cproject b/testhal/SPC560Pxx/SPI/.cproject deleted file mode 100644 index a4ae17c6d..000000000 --- a/testhal/SPC560Pxx/SPI/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/SPC560Pxx/SPI/.project b/testhal/SPC560Pxx/SPI/.project deleted file mode 100644 index c0c005e49..000000000 --- a/testhal/SPC560Pxx/SPI/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - SPC560Pxx-SPI - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_EVB_SPC560P - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/SPC560Pxx/SPI/Makefile b/testhal/SPC560Pxx/SPI/Makefile deleted file mode 100644 index c5e4bde95..000000000 --- a/testhal/SPC560Pxx/SPI/Makefile +++ /dev/null @@ -1,168 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data. -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# If enabled, this option allows to compile the application in VLE mode. -ifeq ($(USE_VLE),) - USE_VLE = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_EVB_SPC560P/board.mk -include $(CHIBIOS)/os/hal/platforms/SPC560Pxx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/PPC/SPC560Pxx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/SPC560P50.ld - -# C sources here. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - $(CHIBIOS)/os/various/shell.c \ - $(CHIBIOS)/os/various/chprintf.c \ - main.c - -# C++ sources here. -CPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -#MCU = e500mc -meabi -msdata=none -mnew-mnemonics -mregnames -MCU = e200zx -meabi -msdata=none -mnew-mnemonics -mregnames - -#TRGT = powerpc-eabi- -TRGT = ppc-vle- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = -D_SPC560P50L5_ - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -include $(CHIBIOS)/os/ports/GCC/PPC/rules.mk diff --git a/testhal/SPC560Pxx/SPI/chconf.h b/testhal/SPC560Pxx/SPI/chconf.h deleted file mode 100644 index dc956ef13..000000000 --- a/testhal/SPC560Pxx/SPI/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/SPC560Pxx/SPI/halconf.h b/testhal/SPC560Pxx/SPI/halconf.h deleted file mode 100644 index fdc079aef..000000000 --- a/testhal/SPC560Pxx/SPI/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/SPC560Pxx/SPI/main.c b/testhal/SPC560Pxx/SPI/main.c deleted file mode 100644 index 83ee0bbb1..000000000 --- a/testhal/SPC560Pxx/SPI/main.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * Maximum speed SPI configuration. - */ -static const SPIConfig hs_spicfg = { - NULL, - 0, - 0, - SPC5_CTAR_CSSCK_DIV2 | SPC5_CTAR_ASC_DIV2 | SPC5_CTAR_FMSZ(8) | - SPC5_CTAR_PBR_PRE2 | SPC5_CTAR_BR_DIV2, /* CTAR0. */ - SPC5_PUSHR_CONT | SPC5_PUSHR_PCS(1) /* PUSHR. */ -}; - -/* - * Low speed SPI configuration (328.125kHz, CPHA=0, CPOL=0, MSb first). - */ -static const SPIConfig ls_spicfg = { - NULL, - 0, - 0, - SPC5_CTAR_CSSCK_DIV64 | SPC5_CTAR_ASC_DIV64 | SPC5_CTAR_FMSZ(8) | - SPC5_CTAR_PBR_PRE2 | SPC5_CTAR_BR_DIV256, /* CTAR0. */ - SPC5_PUSHR_CONT | SPC5_PUSHR_PCS(0) /* PUSHR. */ -}; - -/* - * SPI TX and RX buffers. - */ -static uint8_t txbuf[512]; -static uint8_t rxbuf[512]; - -/* - * SPI bus contender 1. - */ -static WORKING_AREA(spi_thread_1_wa, 256); -static msg_t spi_thread_1(void *p) { - - (void)p; - chRegSetThreadName("SPI thread 1"); - while (TRUE) { - spiAcquireBus(&SPID1); /* Acquire ownership of the bus. */ - palClearPad(PORT_D, PD_LED1); /* LED ON. */ - spiStart(&SPID1, &hs_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID1); /* Slave Select assertion. */ - spiExchange(&SPID1, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID1); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID1); /* Ownership release. */ - } - return 0; -} - -/* - * SPI bus contender 2. - */ -static WORKING_AREA(spi_thread_2_wa, 256); -static msg_t spi_thread_2(void *p) { - - (void)p; - chRegSetThreadName("SPI thread 2"); - while (TRUE) { - spiAcquireBus(&SPID1); /* Acquire ownership of the bus. */ - palSetPad(PORT_D, PD_LED1); /* LED OFF. */ - spiStart(&SPID1, &ls_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID1); /* Slave Select assertion. */ - spiExchange(&SPID1, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID1); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID1); /* Ownership release. */ - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Prepare transmit pattern. - */ - for (i = 0; i < sizeof(txbuf); i++) - txbuf[i] = (uint8_t)i; - - /* Starting driver for test, DSPI_1 I/O pins setup.*/ - spiStart(&SPID1, &ls_spicfg); - SIU.PCR[37].R = PAL_MODE_OUTPUT_ALTERNATE(1); /* SCK */ - SIU.PCR[38].R = PAL_MODE_OUTPUT_ALTERNATE(1); /* SOUT */ - SIU.PCR[36].R = PAL_MODE_OUTPUT_ALTERNATE(1); /* CS[0] */ - SIU.PCR[35].R = PAL_MODE_OUTPUT_ALTERNATE(1); /* CS[1] */ - - /* Testing sending and receiving at the same time.*/ - spiExchange(&SPID1, 4, txbuf, rxbuf); - spiExchange(&SPID1, 32, txbuf, rxbuf); - spiExchange(&SPID1, 512, txbuf, rxbuf); - - /* Testing clock pulses without data buffering.*/ - spiIgnore(&SPID1, 4); - spiIgnore(&SPID1, 32); - - /* Testing sending data ignoring incoming data.*/ - spiSend(&SPID1, 4, txbuf); - spiSend(&SPID1, 32, txbuf); - - /* Testing receiving data while sending idle bits (high level).*/ - spiReceive(&SPID1, 4, rxbuf); - spiReceive(&SPID1, 32, rxbuf); - - /* Testing stop procedure.*/ - spiStop(&SPID1); - - /* - * Starting the transmitter and receiver threads. - */ - chThdCreateStatic(spi_thread_1_wa, sizeof(spi_thread_1_wa), - NORMALPRIO + 1, spi_thread_1, NULL); - chThdCreateStatic(spi_thread_2_wa, sizeof(spi_thread_2_wa), - NORMALPRIO + 1, spi_thread_2, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - palTogglePad(PORT_D, PD_LED2); - } - return 0; -} diff --git a/testhal/SPC560Pxx/SPI/mcuconf.h b/testhal/SPC560Pxx/SPI/mcuconf.h deleted file mode 100644 index ba5720366..000000000 --- a/testhal/SPC560Pxx/SPI/mcuconf.h +++ /dev/null @@ -1,298 +0,0 @@ -/* - SPC5 HAL - Copyright (C) 2013 STMicroelectronics - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * SPC560Pxx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 1...15 Lowest...Highest. - * DMA priorities: - * 0...15 Highest...Lowest. - */ - -#define SPC560Pxx_MCUCONF - -/* - * HAL driver system settings. - */ -#define SPC5_NO_INIT FALSE -#define SPC5_ALLOW_OVERCLOCK FALSE -#define SPC5_DISABLE_WATCHDOG TRUE -#define SPC5_FMPLL0_IDF_VALUE 5 -#define SPC5_FMPLL0_NDIV_VALUE 32 -#define SPC5_FMPLL0_ODF SPC5_FMPLL_ODF_DIV4 -#define SPC5_FMPLL1_IDF_VALUE 5 -#define SPC5_FMPLL1_NDIV_VALUE 60 -#define SPC5_FMPLL1_ODF SPC5_FMPLL_ODF_DIV4 -#define SPC5_AUX0CLK_SRC SPC5_CGM_SS_FMPLL0 -#define SPC5_MCONTROL_DIVIDER_VALUE 2 -#define SPC5_FMPLL1_CLK_DIVIDER_VALUE 2 -#define SPC5_AUX2CLK_SRC SPC5_CGM_SS_FMPLL1 -#define SPC5_SP_CLK_DIVIDER_VALUE 2 -#define SPC5_AUX3CLK_SRC SPC5_CGM_SS_FMPLL1 -#define SPC5_FR_CLK_DIVIDER_VALUE 2 -#define SPC5_ME_ME_BITS (SPC5_ME_ME_RUN1 | \ - SPC5_ME_ME_RUN2 | \ - SPC5_ME_ME_RUN3 | \ - SPC5_ME_ME_HALT0 | \ - SPC5_ME_ME_STOP0) -#define SPC5_ME_TEST_MC_BITS (SPC5_ME_MC_SYSCLK_IRC | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_SAFE_MC_BITS (SPC5_ME_MC_PDO) -#define SPC5_ME_DRUN_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN1_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN2_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN3_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_HALT0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_STOP0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_CFLAON_NORMAL | \ - SPC5_ME_MC_DFLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN_PC3_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC4_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC5_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC6_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC7_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_LP_PC4_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_ME_LP_PC5_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_ME_LP_PC6_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_ME_LP_PC7_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_PIT0_IRQ_PRIORITY 4 -#define SPC5_CLOCK_FAILURE_HOOK() chSysHalt() - -/* - * EDMA driver settings. - */ -#define SPC5_EDMA_CR_SETTING 0 -#define SPC5_EDMA_GROUP0_PRIORITIES \ - 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 -#define SPC5_EDMA_ERROR_IRQ_PRIO 2 -#define SPC5_EDMA_ERROR_HANDLER() chSysHalt() - -/* - * Serial driver system settings. - */ -#define SPC5_SERIAL_USE_LINFLEX0 TRUE -#define SPC5_SERIAL_USE_LINFLEX1 TRUE -#define SPC5_SERIAL_LINFLEX0_PRIORITY 8 -#define SPC5_SERIAL_LINFLEX1_PRIORITY 8 -#define SPC5_SERIAL_LINFLEX0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SERIAL_LINFLEX0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) -#define SPC5_SERIAL_LINFLEX1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SERIAL_LINFLEX1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -/* - * PWM driver system settings. - */ -#define SPC5_PWM_USE_SMOD0 FALSE -#define SPC5_PWM_USE_SMOD1 FALSE -#define SPC5_PWM_USE_SMOD2 FALSE -#define SPC5_PWM_USE_SMOD3 FALSE -#define SPC5_PWM_SMOD0_PRIORITY 7 -#define SPC5_PWM_SMOD1_PRIORITY 7 -#define SPC5_PWM_SMOD2_PRIORITY 7 -#define SPC5_PWM_SMOD3_PRIORITY 7 -#define SPC5_PWM_FLEXPWM0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_PWM_FLEXPWM0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -/* - * ICU driver system settings. - */ -#define SPC5_ICU_USE_SMOD0 FALSE -#define SPC5_ICU_USE_SMOD1 FALSE -#define SPC5_ICU_USE_SMOD2 FALSE -#define SPC5_ICU_USE_SMOD3 FALSE -#define SPC5_ICU_USE_SMOD4 FALSE -#define SPC5_ICU_USE_SMOD5 FALSE -#define SPC5_ICU_ETIMER0_PRIORITY 7 -#define SPC5_ICU_ETIMER0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_ICU_ETIMER0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -#define SPC5_ICU_USE_SMOD6 FALSE -#define SPC5_ICU_USE_SMOD7 FALSE -#define SPC5_ICU_USE_SMOD8 FALSE -#define SPC5_ICU_USE_SMOD9 FALSE -#define SPC5_ICU_USE_SMOD10 FALSE -#define SPC5_ICU_USE_SMOD11 FALSE -#define SPC5_ICU_ETIMER1_PRIORITY 7 -#define SPC5_ICU_ETIMER1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_ICU_ETIMER1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -/* - * SPI driver system settings. - */ -#define SPC5_SPI_USE_DSPI0 TRUE -#define SPC5_SPI_USE_DSPI1 TRUE -#define SPC5_SPI_USE_DSPI2 TRUE -#define SPC5_SPI_USE_DSPI3 TRUE -#define SPC5_SPI_USE_DSPI4 FALSE -#define SPC5_SPI_DSPI0_MCR (SPC5_MCR_PCSIS0 | \ - SPC5_MCR_PCSIS1 | \ - SPC5_MCR_PCSIS2 | \ - SPC5_MCR_PCSIS3 | \ - SPC5_MCR_PCSIS4 | \ - SPC5_MCR_PCSIS5 | \ - SPC5_MCR_PCSIS6 | \ - SPC5_MCR_PCSIS7) -#define SPC5_SPI_DSPI1_MCR (SPC5_MCR_PCSIS0 | \ - SPC5_MCR_PCSIS1 | \ - SPC5_MCR_PCSIS2 | \ - SPC5_MCR_PCSIS3 | \ - SPC5_MCR_PCSIS4 | \ - SPC5_MCR_PCSIS5 | \ - SPC5_MCR_PCSIS6 | \ - SPC5_MCR_PCSIS7) -#define SPC5_SPI_DSPI2_MCR (SPC5_MCR_PCSIS0 | \ - SPC5_MCR_PCSIS1 | \ - SPC5_MCR_PCSIS2 | \ - SPC5_MCR_PCSIS3 | \ - SPC5_MCR_PCSIS4 | \ - SPC5_MCR_PCSIS5 | \ - SPC5_MCR_PCSIS6 | \ - SPC5_MCR_PCSIS7) -#define SPC5_SPI_DSPI3_MCR (SPC5_MCR_PCSIS0 | \ - SPC5_MCR_PCSIS1 | \ - SPC5_MCR_PCSIS2 | \ - SPC5_MCR_PCSIS3 | \ - SPC5_MCR_PCSIS4 | \ - SPC5_MCR_PCSIS5 | \ - SPC5_MCR_PCSIS6 | \ - SPC5_MCR_PCSIS7) -#define SPC5_SPI_DSPI4_MCR (SPC5_MCR_PCSIS0 | \ - SPC5_MCR_PCSIS1 | \ - SPC5_MCR_PCSIS2 | \ - SPC5_MCR_PCSIS3 | \ - SPC5_MCR_PCSIS4 | \ - SPC5_MCR_PCSIS5 | \ - SPC5_MCR_PCSIS6 | \ - SPC5_MCR_PCSIS7) -#define SPC5_SPI_DSPI0_DMA_IRQ_PRIO 10 -#define SPC5_SPI_DSPI1_DMA_IRQ_PRIO 10 -#define SPC5_SPI_DSPI2_DMA_IRQ_PRIO 10 -#define SPC5_SPI_DSPI3_DMA_IRQ_PRIO 10 -#define SPC5_SPI_DSPI4_DMA_IRQ_PRIO 10 -#define SPC5_SPI_DSPI0_IRQ_PRIO 10 -#define SPC5_SPI_DSPI1_IRQ_PRIO 10 -#define SPC5_SPI_DSPI2_IRQ_PRIO 10 -#define SPC5_SPI_DSPI3_IRQ_PRIO 10 -#define SPC5_SPI_DSPI4_IRQ_PRIO 10 -#define SPC5_SPI_DMA_ERROR_HOOK(spip) chSysHalt() -#define SPC5_SPI_DSPI0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SPI_DSPI0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) -#define SPC5_SPI_DSPI1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SPI_DSPI1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) -#define SPC5_SPI_DSPI2_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SPI_DSPI2_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) -#define SPC5_SPI_DSPI3_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SPI_DSPI3_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) -#define SPC5_SPI_DSPI4_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SPI_DSPI4_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) diff --git a/testhal/SPC560Pxx/SPI/readme.txt b/testhal/SPC560Pxx/SPI/readme.txt deleted file mode 100644 index 302b4a23b..000000000 --- a/testhal/SPC560Pxx/SPI/readme.txt +++ /dev/null @@ -1,25 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - SPI driver demo for SPC560Pxx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics SPC560Pxx microcontroller installed on -XPC56xx EVB Motherboard. - -** The Demo ** - -The application demonstrates the use of the SPC560Pxx SPI driver. - -** Board Setup ** - -** Build Procedure ** - -The demo has been tested using HighTec compiler. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. - - http://www.st.com diff --git a/testhal/SPC563Mxx/ADC/.cproject b/testhal/SPC563Mxx/ADC/.cproject deleted file mode 100644 index 57b44e9a8..000000000 --- a/testhal/SPC563Mxx/ADC/.cproject +++ /dev/null @@ -1,56 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/SPC563Mxx/ADC/.project b/testhal/SPC563Mxx/ADC/.project deleted file mode 100644 index ff4e5ffca..000000000 --- a/testhal/SPC563Mxx/ADC/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - SPC563Mxx-ADC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_EVB_SPC563M - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/SPC563Mxx/ADC/Makefile b/testhal/SPC563Mxx/ADC/Makefile deleted file mode 100644 index 644898587..000000000 --- a/testhal/SPC563Mxx/ADC/Makefile +++ /dev/null @@ -1,168 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data. -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# If enabled, this option allows to compile the application in VLE mode. -ifeq ($(USE_VLE),) - USE_VLE = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_EVB_SPC563M/board.mk -include $(CHIBIOS)/os/hal/platforms/SPC563Mxx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/PPC/SPC563Mxx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/SPC563M64.ld - -# C sources here. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - $(CHIBIOS)/os/various/shell.c \ - $(CHIBIOS)/os/various/chprintf.c \ - adc_cfg.c main.c - -# C++ sources here. -CPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -#MCU = e500mc -meabi -msdata=none -mnew-mnemonics -mregnames -MCU = e200zx -meabi -msdata=none -mnew-mnemonics -mregnames - -#TRGT = powerpc-eabi- -TRGT = ppc-vle- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -include $(CHIBIOS)/os/ports/GCC/PPC/rules.mk diff --git a/testhal/SPC563Mxx/ADC/adc_cfg.c b/testhal/SPC563Mxx/ADC/adc_cfg.c deleted file mode 100644 index 7bb5bbbe6..000000000 --- a/testhal/SPC563Mxx/ADC/adc_cfg.c +++ /dev/null @@ -1,743 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" -#include "adc_cfg.h" - -/* - * ADC conversion group. - * Mode: Linear buffer, 8 samples of 5 channels, SW triggered. - * Channels: ADC_CHN_VRL, ADC_CHN_VREF25, ADC_CHN_VREF50, - * ADC_CHN_VREF75, ADC_CHN_VRH. - * - * NOTE: The configuration of a sequence is very complex in this ADC - * implementation. Configurations are meant to be generated by the - * SPC5 Studio visual configuration tool and not be written manually. - * Writing complex sequences manually requires ad deep knowledge of both - * the EQADC peripheral and the driver implementation. - */ -static const adccommand_t adcgrpcfg1_commands[ADC_GRP1_NUM_CHANNELS * - ADC_GRP1_BUF_DEPTH] = { - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF25), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF75), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF25), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF75), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF25), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF75), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF25), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF75), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF25), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF75), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF25), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF75), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF25), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF75), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF25), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF75), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(0) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH) -}; - -const ADCConversionGroup adcgrpcfg1 = { - FALSE, - ADC_GRP1_NUM_CHANNELS, - NULL, - adcerrorcallback, - EQADC_CFCR_MODE_SWCS, - 0, 0, /* ISEL, EISEL.*/ - ADC_GRP1_BUF_DEPTH, - adcgrpcfg1_commands -}; - -/* - * ADC conversion group. - * Mode: Circular buffer, 16 samples of 5 channels, SW triggered. - * Channels: ADC_CHN_VRL, ADC_CHN_VRL, ADC_CHN_VREF25, ADC_CHN_VREF50, - * ADC_CHN_VREF50, ADC_CHN_VREF75, ADC_CHN_VRH, ADC_CHN_VRH. - * - * NOTE: The configuration of a sequence is very complex in this ADC - * implementation. Configurations are meant to be generated by the - * SPC5 Studio visual configuration tool and not be written manually. - * Writing complex sequences manually requires ad deep knowledge of both - * the EQADC peripheral and the driver implementation. - */ -static const adccommand_t adcgrpcfg2_commands[ADC_GRP2_NUM_CHANNELS * - ADC_GRP2_BUF_DEPTH] = { - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF25), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF75), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF25), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF75), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF25), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF75), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF25), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF75), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF25), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF75), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF25), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF75), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF25), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF75), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF25), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF75), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF25), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF75), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF25), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF75), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF25), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF75), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF25), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF75), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF25), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF75), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF25), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF75), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF25), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF75), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRL), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF25), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF50), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VREF75), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), - - EQADC_CONV_BN_ADC0 | EQADC_CONV_LST_64 | EQADC_CONV_CAL | - EQADC_CONV_FMT_RJU | EQADC_CONV_CONFIG_STD | EQADC_CONV_MSG_RFIFO(2) | - EQADC_CONV_CHANNEL(ADC_CHN_VRH), -}; - -const ADCConversionGroup adcgrpcfg2 = { - TRUE, - ADC_GRP2_NUM_CHANNELS, - adccallback, - adcerrorcallback, - EQADC_CFCR_MODE_SWCS, - 0, 0, /* ISEL, EISEL.*/ - ADC_GRP2_BUF_DEPTH, - adcgrpcfg2_commands -}; diff --git a/testhal/SPC563Mxx/ADC/adc_cfg.h b/testhal/SPC563Mxx/ADC/adc_cfg.h deleted file mode 100644 index cf0f411a3..000000000 --- a/testhal/SPC563Mxx/ADC/adc_cfg.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _ADC_CFG_H_ -#define _ADC_CFG_H_ - -#define ADC_GRP1_NUM_CHANNELS 5 -#define ADC_GRP1_BUF_DEPTH 8 - -#define ADC_GRP2_NUM_CHANNELS 8 -#define ADC_GRP2_BUF_DEPTH 16 - -extern const ADCConversionGroup adcgrpcfg1; -extern const ADCConversionGroup adcgrpcfg2; - -#ifdef __cplusplus -extern "C" { -#endif - void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n); - void adcerrorcallback(ADCDriver *adcp, adcerror_t err); -#ifdef __cplusplus -} -#endif - -#endif /* _ADC_CFG_H_ */ diff --git a/testhal/SPC563Mxx/ADC/chconf.h b/testhal/SPC563Mxx/ADC/chconf.h deleted file mode 100644 index dc956ef13..000000000 --- a/testhal/SPC563Mxx/ADC/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/SPC563Mxx/ADC/halconf.h b/testhal/SPC563Mxx/ADC/halconf.h deleted file mode 100644 index a719ec40a..000000000 --- a/testhal/SPC563Mxx/ADC/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC TRUE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/SPC563Mxx/ADC/main.c b/testhal/SPC563Mxx/ADC/main.c deleted file mode 100644 index 6ec736309..000000000 --- a/testhal/SPC563Mxx/ADC/main.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" -#include "adc_cfg.h" - -static adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH]; -static adcsample_t samples2[ADC_GRP2_NUM_CHANNELS * ADC_GRP2_BUF_DEPTH]; - -/* - * ADC streaming callback. - */ -size_t nx = 0, ny = 0; -void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) { - - (void)adcp; - if (samples2 == buffer) { - nx += n; - } - else { - ny += n; - } -} - -/* - * ADC error callback. - */ -void adcerrorcallback(ADCDriver *adcp, adcerror_t err) { - - (void)adcp; - (void)err; - - palSetPad(PORT11, P11_LED4); - chSysHalt(); -} - -/* - * LED blinker thread, times are in milliseconds. - */ -static WORKING_AREA(waThread1, 128); -static msg_t Thread1(void *arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - palSetPad(PORT11, P11_LED1); - chThdSleepMilliseconds(500); - palClearPad(PORT11, P11_LED1); - chThdSleepMilliseconds(500); - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Activates the ADC1, ADC3 drivers. - */ - adcStart(&ADCD1, NULL); - adcStart(&ADCD3, NULL); - - /* - * Linear conversion. - */ - adcConvert(&ADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH); - chThdSleepMilliseconds(1000); - - /* - * Starts an ADC continuous conversion. - */ - adcStartConversion(&ADCD3, &adcgrpcfg2, samples2, ADC_GRP2_BUF_DEPTH); - - /* - * Normal main() thread activity, once the button is pressed the ADC - * conversion is stopped. - */ - while (TRUE) { - if (palReadPad(PORT11, P11_BUTTON1)) { - adcStopConversion(&ADCD3); - } - chThdSleepMilliseconds(500); - } -} diff --git a/testhal/SPC563Mxx/ADC/mcuconf.h b/testhal/SPC563Mxx/ADC/mcuconf.h deleted file mode 100644 index 18cc088ac..000000000 --- a/testhal/SPC563Mxx/ADC/mcuconf.h +++ /dev/null @@ -1,122 +0,0 @@ -/* - SPC5 HAL - Copyright (C) 2013 STMicroelectronics - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * SPC563Mxx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 1...15 Lowest...Highest. - * DMA priorities: - * 0...15 Highest...Lowest. - */ - -#define SPC563Mxx_MCUCONF - -/* - * HAL driver system settings. - */ -#define SPC5_NO_INIT FALSE -#define SPC5_CLK_BYPASS FALSE -#define SPC5_ALLOW_OVERCLOCK FALSE -#define SPC5_CLK_PREDIV_VALUE 2 -#define SPC5_CLK_MFD_VALUE 80 -#define SPC5_CLK_RFD SPC5_RFD_DIV4 -#define SPC5_FLASH_BIUCR (BIUCR_BANK1_TOO | \ - BIUCR_MASTER4_PREFETCH | \ - BIUCR_MASTER0_PREFETCH | \ - BIUCR_DPFEN | \ - BIUCR_IPFEN | \ - BIUCR_PFLIM_ON_MISS | \ - BIUCR_BFEN) - -/* - * EDMA driver settings. - */ -#define SPC5_EDMA_CR_SETTING (EDMA_CR_GRP3PRI(3) | \ - EDMA_CR_GRP2PRI(2) | \ - EDMA_CR_GRP1PRI(1) | \ - EDMA_CR_GRP0PRI(0) | \ - EDMA_CR_ERGA) -#define SPC5_EDMA_GROUP0_PRIORITIES \ - 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 -#define SPC5_EDMA_GROUP1_PRIORITIES \ - 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 -#define SPC5_EDMA_ERROR_IRQ_PRIO 2 -#define SPC5_EDMA_ERROR_HANDLER() chSysHalt() - -/* - * ADC driver settings. - */ -#define SPC5_ADC_USE_ADC0_Q0 TRUE -#define SPC5_ADC_USE_ADC0_Q1 TRUE -#define SPC5_ADC_USE_ADC0_Q2 TRUE -#define SPC5_ADC_USE_ADC1_Q3 TRUE -#define SPC5_ADC_USE_ADC1_Q4 TRUE -#define SPC5_ADC_USE_ADC1_Q5 TRUE -#define SPC5_ADC_FIFO0_DMA_IRQ_PRIO 12 -#define SPC5_ADC_FIFO1_DMA_IRQ_PRIO 12 -#define SPC5_ADC_FIFO2_DMA_IRQ_PRIO 12 -#define SPC5_ADC_FIFO3_DMA_IRQ_PRIO 12 -#define SPC5_ADC_FIFO4_DMA_IRQ_PRIO 12 -#define SPC5_ADC_FIFO5_DMA_IRQ_PRIO 12 -#define SPC5_ADC_CR_CLK_PS ADC_CR_CLK_PS(5) -#define SPC5_ADC_PUDCR {ADC_PUDCR_NONE, \ - ADC_PUDCR_NONE, \ - ADC_PUDCR_NONE, \ - ADC_PUDCR_NONE, \ - ADC_PUDCR_NONE, \ - ADC_PUDCR_NONE, \ - ADC_PUDCR_NONE, \ - ADC_PUDCR_NONE} - -/* - * SERIAL driver system settings. - */ -#define SPC5_USE_ESCIA TRUE -#define SPC5_USE_ESCIB TRUE -#define SPC5_ESCIA_PRIORITY 8 -#define SPC5_ESCIB_PRIORITY 8 - -/* - * SPI driver system settings. - */ -#define SPC5_SPI_USE_DSPI1 FALSE -#define SPC5_SPI_USE_DSPI2 FALSE -#define SPC5_SPI_DSPI1_MCR (SPC5_MCR_PCSIS0 | \ - SPC5_MCR_PCSIS1 | \ - SPC5_MCR_PCSIS2 | \ - SPC5_MCR_PCSIS3 | \ - SPC5_MCR_PCSIS4 | \ - SPC5_MCR_PCSIS5 | \ - SPC5_MCR_PCSIS6 | \ - SPC5_MCR_PCSIS7) -#define SPC5_SPI_DSPI2_MCR (SPC5_MCR_PCSIS0 | \ - SPC5_MCR_PCSIS1 | \ - SPC5_MCR_PCSIS2 | \ - SPC5_MCR_PCSIS3 | \ - SPC5_MCR_PCSIS4 | \ - SPC5_MCR_PCSIS5 | \ - SPC5_MCR_PCSIS6 | \ - SPC5_MCR_PCSIS7) -#define SPC5_SPI_DSPI1_DMA_IRQ_PRIO 10 -#define SPC5_SPI_DSPI2_DMA_IRQ_PRIO 10 -#define SPC5_SPI_DSPI1_IRQ_PRIO 10 -#define SPC5_SPI_DSPI2_IRQ_PRIO 10 -#define SPC5_SPI_DMA_ERROR_HOOK(spip) chSysHalt() diff --git a/testhal/SPC563Mxx/ADC/readme.txt b/testhal/SPC563Mxx/ADC/readme.txt deleted file mode 100644 index ebe5c0a37..000000000 --- a/testhal/SPC563Mxx/ADC/readme.txt +++ /dev/null @@ -1,27 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - ADC driver demo for SPC563Mxx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics SPC563Mxx microcontroller installed on -XPC56xx EVB Motherboard. - -** The Demo ** - -The application demonstrates the use of the SPC563Mxx ADC driver. - -** Board Setup ** - -None. - -** Build Procedure ** - -The demo has been tested using HighTec compiler. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. - - http://www.st.com diff --git a/testhal/SPC563Mxx/ICU-PWM/.cproject b/testhal/SPC563Mxx/ICU-PWM/.cproject deleted file mode 100644 index a4ae17c6d..000000000 --- a/testhal/SPC563Mxx/ICU-PWM/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/SPC563Mxx/ICU-PWM/.project b/testhal/SPC563Mxx/ICU-PWM/.project deleted file mode 100644 index 31139adbb..000000000 --- a/testhal/SPC563Mxx/ICU-PWM/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - SPC563Mxx-SPI - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_EVB_SPC563M - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/SPC563Mxx/ICU-PWM/Makefile b/testhal/SPC563Mxx/ICU-PWM/Makefile deleted file mode 100644 index 911a39668..000000000 --- a/testhal/SPC563Mxx/ICU-PWM/Makefile +++ /dev/null @@ -1,168 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data. -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# If enabled, this option allows to compile the application in VLE mode. -ifeq ($(USE_VLE),) - USE_VLE = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_EVB_SPC563M/board.mk -include $(CHIBIOS)/os/hal/platforms/SPC563Mxx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/PPC/SPC563Mxx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/SPC563M64.ld - -# C sources here. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - $(CHIBIOS)/os/various/shell.c \ - $(CHIBIOS)/os/various/chprintf.c \ - main.c - -# C++ sources here. -CPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -#MCU = e500mc -meabi -msdata=none -mnew-mnemonics -mregnames -MCU = e200zx -meabi -msdata=none -mnew-mnemonics -mregnames - -#TRGT = powerpc-eabi- -TRGT = ppc-vle- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -include $(CHIBIOS)/os/ports/GCC/PPC/rules.mk diff --git a/testhal/SPC563Mxx/ICU-PWM/chconf.h b/testhal/SPC563Mxx/ICU-PWM/chconf.h deleted file mode 100644 index b4c46c7f6..000000000 --- a/testhal/SPC563Mxx/ICU-PWM/chconf.h +++ /dev/null @@ -1,536 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010, - 2011,2012 Giovanni Di Sirio. - - This file is part of ChibiOS/RT. - - ChibiOS/RT is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS/RT is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . - - --- - - A special exception to the GPL can be applied should you wish to distribute - a combined work that includes ChibiOS/RT, without being obliged to provide - the source code for any proprietary components. See the file exception.txt - for full details of how and when the exception can be applied. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES FALSE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/SPC563Mxx/ICU-PWM/halconf.h b/testhal/SPC563Mxx/ICU-PWM/halconf.h deleted file mode 100644 index 3a6d72910..000000000 --- a/testhal/SPC563Mxx/ICU-PWM/halconf.h +++ /dev/null @@ -1,367 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @name Drivers enable switches - */ -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU TRUE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name ADC driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION FALSE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name CAN driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name I2C driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION FALSE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name MAC driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name MMC_SPI driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name SDC driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 1 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name SERIAL driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name SERIAL_USB driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 64 -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name SPI driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION FALSE -#endif -/** @} */ - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/SPC563Mxx/ICU-PWM/main.c b/testhal/SPC563Mxx/ICU-PWM/main.c deleted file mode 100644 index 51edb64c8..000000000 --- a/testhal/SPC563Mxx/ICU-PWM/main.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void pwmpcb(PWMDriver *pwmp) { - - (void)pwmp; - palClearPad(PORT11, P11_LED1); -} - -static void pwmc1cb(PWMDriver *pwmp) { - - (void)pwmp; - palSetPad(PORT11, P11_LED1); -} - -static PWMConfig pwmcfg = { - 100000, /* 100kHz PWM clock frequency.*/ - 20000, /* Initial PWM period 0.2s.*/ - pwmpcb, - { - {PWM_OUTPUT_ACTIVE_HIGH, pwmc1cb} - }, - PWM_ALIGN_EDGE -}; - -icucnt_t last_width, last_period; - -static void icuwidthcb(ICUDriver *icup) { - - palSetPad(PORT11, P11_LED2); - last_width = icuGetWidth(icup); -} - -static void icuperiodcb(ICUDriver *icup) { - - palClearPad(PORT11, P11_LED2); - last_period = icuGetPeriod(icup); -} - -static ICUConfig icucfg = { - ICU_INPUT_ACTIVE_HIGH, - 100000, /* 100kHz ICU clock frequency.*/ - icuwidthcb, - icuperiodcb, - NULL -}; - -/* - * Application entry point. - */ -int main(void) { - - /* Initialization of all the imported components in the order specified in - the application wizard. The function is generated automatically.*/ - componentsInit(); - - palClearPad(PORT11, P11_LED4); - - /* - * Initializes the PWM driver 8 and ICU driver 1. - * PIN80 is the PWM output. - * PIN63 is the ICU input. - * The two pins have to be externally connected together. - */ - - /* Sets PIN63 alternative function.*/ - SIU.PCR[179].R = 0b0000010100001100; - - /* Sets PIN80 alternative function.*/ - SIU.PCR[202].R = 0b0000011000001100; - - icuStart(&ICUD1, &icucfg); - icuEnable(&ICUD1); - pwmStart(&PWMD8, &pwmcfg); - - chThdSleepMilliseconds(2000); - - /* - * Starts the PWM channel 0 using 75% duty cycle. - */ - pwmEnableChannel(&PWMD8, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD8, 7500)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 50% duty cycle. - */ - pwmEnableChannel(&PWMD8, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD8, 5000)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 25% duty cycle. - */ - pwmEnableChannel(&PWMD8, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD8, 2500)); - chThdSleepMilliseconds(5000); - - /* - * Changes PWM period and the PWM channel 0 to 50% duty cycle. - */ - pwmChangePeriod(&PWMD8, 25000); - pwmEnableChannel(&PWMD8, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD8, 5000)); - chThdSleepMilliseconds(5000); - - /* - * Disables PWM channel 0 and stops the drivers. - */ - pwmDisableChannel(&PWMD8, 0); - pwmStop(&PWMD8); - - /* - * Disables and stops the ICU drivers. - */ - - icuDisable(&ICUD1); - icuStop(&ICUD1); - - palClearPad(PORT11, P11_LED3); - palClearPad(PORT11, P11_LED4); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/SPC563Mxx/ICU-PWM/mcuconf.h b/testhal/SPC563Mxx/ICU-PWM/mcuconf.h deleted file mode 100644 index be3ee85cf..000000000 --- a/testhal/SPC563Mxx/ICU-PWM/mcuconf.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - SPC5 HAL - Copyright (C) 2013 STMicroelectronics - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * SPC563Mxx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 1...15 Lowest...Highest. - */ - -#define SPC563Mxx_MCUCONF - -/* - * HAL driver system settings. - */ -#define SPC5_NO_INIT FALSE -#define SPC5_CLK_BYPASS FALSE -#define SPC5_ALLOW_OVERCLOCK FALSE -#define SPC5_CLK_PREDIV_VALUE 2 -#define SPC5_CLK_MFD_VALUE 80 -#define SPC5_CLK_RFD SPC5_RFD_DIV4 -#define SPC5_FLASH_BIUCR (BIUCR_BANK1_TOO | \ - BIUCR_MASTER4_PREFETCH | \ - BIUCR_MASTER0_PREFETCH | \ - BIUCR_DPFEN | \ - BIUCR_IPFEN | \ - BIUCR_PFLIM_ON_MISS | \ - BIUCR_BFEN) - -/* - * ADC driver settings. - */ -#define SPC5_ADC_USE_ADC0_Q0 FALSE -#define SPC5_ADC_USE_ADC0_Q1 FALSE -#define SPC5_ADC_USE_ADC0_Q2 FALSE -#define SPC5_ADC_USE_ADC1_Q3 FALSE -#define SPC5_ADC_USE_ADC1_Q4 FALSE -#define SPC5_ADC_USE_ADC1_Q5 FALSE -#define SPC5_ADC_FIFO0_DMA_PRIO 12 -#define SPC5_ADC_FIFO1_DMA_PRIO 12 -#define SPC5_ADC_FIFO2_DMA_PRIO 12 -#define SPC5_ADC_FIFO3_DMA_PRIO 12 -#define SPC5_ADC_FIFO4_DMA_PRIO 12 -#define SPC5_ADC_FIFO5_DMA_PRIO 12 -#define SPC5_ADC_FIFO0_DMA_IRQ_PRIO 12 -#define SPC5_ADC_FIFO1_DMA_IRQ_PRIO 12 -#define SPC5_ADC_FIFO2_DMA_IRQ_PRIO 12 -#define SPC5_ADC_FIFO3_DMA_IRQ_PRIO 12 -#define SPC5_ADC_FIFO4_DMA_IRQ_PRIO 12 -#define SPC5_ADC_FIFO5_DMA_IRQ_PRIO 12 -#define SPC5_ADC_CR_CLK_PS ADC_CR_CLK_PS(5) -#define SPC5_ADC_PUDCR {ADC_PUDCR_NONE,ADC_PUDCR_NONE,ADC_PUDCR_NONE,ADC_PUDCR_NONE,ADC_PUDCR_NONE,ADC_PUDCR_NONE,ADC_PUDCR_NONE,ADC_PUDCR_NONE} - -/* - * SERIAL driver system settings. - */ -#define SPC5_USE_ESCIA TRUE -#define SPC5_USE_ESCIB FALSE -#define SPC5_ESCIA_PRIORITY 8 -#define SPC5_ESCIB_PRIORITY 8 - -/* - * ICU - PWM driver system settings. - */ -#define SPC5_ICU_USE_EMIOS_CH0 TRUE -#define SPC5_ICU_USE_EMIOS_CH1 TRUE -#define SPC5_ICU_USE_EMIOS_CH2 TRUE -#define SPC5_ICU_USE_EMIOS_CH3 TRUE -#define SPC5_ICU_USE_EMIOS_CH4 TRUE -#define SPC5_ICU_USE_EMIOS_CH5 TRUE -#define SPC5_ICU_USE_EMIOS_CH6 TRUE -#define SPC5_ICU_USE_EMIOS_CH8 TRUE - -#define SPC5_PWM_USE_EMIOS_CH9 TRUE -#define SPC5_PWM_USE_EMIOS_CH10 TRUE -#define SPC5_PWM_USE_EMIOS_CH11 TRUE -#define SPC5_PWM_USE_EMIOS_CH12 TRUE -#define SPC5_PWM_USE_EMIOS_CH13 TRUE -#define SPC5_PWM_USE_EMIOS_CH14 TRUE -#define SPC5_PWM_USE_EMIOS_CH15 TRUE -#define SPC5_PWM_USE_EMIOS_CH23 TRUE - -#define SPC5_EMIOS_GLOBAL_PRESCALER 200 diff --git a/testhal/SPC563Mxx/ICU-PWM/readme.txt b/testhal/SPC563Mxx/ICU-PWM/readme.txt deleted file mode 100644 index 90fcf6d5c..000000000 --- a/testhal/SPC563Mxx/ICU-PWM/readme.txt +++ /dev/null @@ -1,27 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - ICU_PWM driver demo for SPC563Mxx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics SPC563Mxx microcontroller installed on -XPC56xx EVB Motherboard. - -** The Demo ** - -The application demonstrates the use of the SPC563Mxx ICU and PWM drivers. - -** Board Setup ** - -Connect PIN63 and PIN80 together. - -** Build Procedure ** - -The demo has been tested using HighTec compiler. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. - - http://www.st.com diff --git a/testhal/SPC563Mxx/SPI/.cproject b/testhal/SPC563Mxx/SPI/.cproject deleted file mode 100644 index a4ae17c6d..000000000 --- a/testhal/SPC563Mxx/SPI/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/SPC563Mxx/SPI/.project b/testhal/SPC563Mxx/SPI/.project deleted file mode 100644 index 31139adbb..000000000 --- a/testhal/SPC563Mxx/SPI/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - SPC563Mxx-SPI - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_EVB_SPC563M - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/SPC563Mxx/SPI/Makefile b/testhal/SPC563Mxx/SPI/Makefile deleted file mode 100644 index 911a39668..000000000 --- a/testhal/SPC563Mxx/SPI/Makefile +++ /dev/null @@ -1,168 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data. -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# If enabled, this option allows to compile the application in VLE mode. -ifeq ($(USE_VLE),) - USE_VLE = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_EVB_SPC563M/board.mk -include $(CHIBIOS)/os/hal/platforms/SPC563Mxx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/PPC/SPC563Mxx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/SPC563M64.ld - -# C sources here. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - $(CHIBIOS)/os/various/shell.c \ - $(CHIBIOS)/os/various/chprintf.c \ - main.c - -# C++ sources here. -CPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -#MCU = e500mc -meabi -msdata=none -mnew-mnemonics -mregnames -MCU = e200zx -meabi -msdata=none -mnew-mnemonics -mregnames - -#TRGT = powerpc-eabi- -TRGT = ppc-vle- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -include $(CHIBIOS)/os/ports/GCC/PPC/rules.mk diff --git a/testhal/SPC563Mxx/SPI/chconf.h b/testhal/SPC563Mxx/SPI/chconf.h deleted file mode 100644 index dc956ef13..000000000 --- a/testhal/SPC563Mxx/SPI/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/SPC563Mxx/SPI/halconf.h b/testhal/SPC563Mxx/SPI/halconf.h deleted file mode 100644 index fdc079aef..000000000 --- a/testhal/SPC563Mxx/SPI/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/SPC563Mxx/SPI/main.c b/testhal/SPC563Mxx/SPI/main.c deleted file mode 100644 index 46378a5f8..000000000 --- a/testhal/SPC563Mxx/SPI/main.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * Maximum speed SPI configuration. - */ -static const SPIConfig hs_spicfg = { - NULL, - 0, - 0, - SPC5_CTAR_CSSCK_DIV2 | SPC5_CTAR_ASC_DIV2 | SPC5_CTAR_FMSZ(8) | - SPC5_CTAR_PBR_PRE2 | SPC5_CTAR_BR_DIV2, /* CTAR0. */ - SPC5_PUSHR_CONT | SPC5_PUSHR_PCS(1) /* PUSHR. */ -}; - -/* - * Low speed SPI configuration (328.125kHz, CPHA=0, CPOL=0, MSb first). - */ -static const SPIConfig ls_spicfg = { - NULL, - 0, - 0, - SPC5_CTAR_CSSCK_DIV64 | SPC5_CTAR_ASC_DIV64 | SPC5_CTAR_FMSZ(8) | - SPC5_CTAR_PBR_PRE2 | SPC5_CTAR_BR_DIV256, /* CTAR0. */ - SPC5_PUSHR_CONT | SPC5_PUSHR_PCS(0) /* PUSHR. */ -}; - -/* - * SPI TX and RX buffers. - */ -static uint8_t txbuf[512]; -static uint8_t rxbuf[512]; - -/* - * SPI bus contender 1. - */ -static WORKING_AREA(spi_thread_1_wa, 256); -static msg_t spi_thread_1(void *p) { - - (void)p; - chRegSetThreadName("SPI thread 1"); - while (TRUE) { - spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ - palClearPad(PORT11, P11_LED1); /* LED ON. */ - spiStart(&SPID2, &hs_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID2); /* Slave Select assertion. */ - spiExchange(&SPID2, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID2); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID2); /* Ownership release. */ - } - return 0; -} - -/* - * SPI bus contender 2. - */ -static WORKING_AREA(spi_thread_2_wa, 256); -static msg_t spi_thread_2(void *p) { - - (void)p; - chRegSetThreadName("SPI thread 2"); - while (TRUE) { - spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ - palSetPad(PORT11, P11_LED1); /* LED OFF. */ - spiStart(&SPID2, &ls_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID2); /* Slave Select assertion. */ - spiExchange(&SPID2, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID2); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID2); /* Ownership release. */ - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Prepare transmit pattern. - */ - for (i = 0; i < sizeof(txbuf); i++) - txbuf[i] = (uint8_t)i; - - /* Starting driver for test, DSPI_B I/O pins setup.*/ - spiStart(&SPID2, &ls_spicfg); - SIU.PCR[102].R = PAL_MODE_OUTPUT_ALTERNATE(1); /* SCK */ - SIU.PCR[103].R = PAL_MODE_OUTPUT_ALTERNATE(1); /* SIN */ - SIU.PCR[104].R = PAL_MODE_OUTPUT_ALTERNATE(1); /* SOUT */ - SIU.PCR[105].R = PAL_MODE_OUTPUT_ALTERNATE(1); /* PCS[0] */ - SIU.PCR[106].R = PAL_MODE_OUTPUT_ALTERNATE(1); /* PCS[1] */ - - /* Testing sending and receiving at the same time.*/ - spiExchange(&SPID2, 4, txbuf, rxbuf); - spiExchange(&SPID2, 32, txbuf, rxbuf); - spiExchange(&SPID2, 512, txbuf, rxbuf); - - /* Testing clock pulses without data buffering.*/ - spiIgnore(&SPID2, 4); - spiIgnore(&SPID2, 32); - - /* Testing sending data ignoring incoming data.*/ - spiSend(&SPID2, 4, txbuf); - spiSend(&SPID2, 32, txbuf); - - /* Testing receiving data while sending idle bits (high level).*/ - spiReceive(&SPID2, 4, rxbuf); - spiReceive(&SPID2, 32, rxbuf); - - /* Testing stop procedure.*/ - spiStop(&SPID2); - - /* - * Starting the transmitter and receiver threads. - */ - chThdCreateStatic(spi_thread_1_wa, sizeof(spi_thread_1_wa), - NORMALPRIO + 1, spi_thread_1, NULL); - chThdCreateStatic(spi_thread_2_wa, sizeof(spi_thread_2_wa), - NORMALPRIO + 1, spi_thread_2, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - palTogglePad(PORT11, P11_LED2); - } - return 0; -} diff --git a/testhal/SPC563Mxx/SPI/mcuconf.h b/testhal/SPC563Mxx/SPI/mcuconf.h deleted file mode 100644 index 6affa7878..000000000 --- a/testhal/SPC563Mxx/SPI/mcuconf.h +++ /dev/null @@ -1,122 +0,0 @@ -/* - SPC5 HAL - Copyright (C) 2013 STMicroelectronics - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * SPC563Mxx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 1...15 Lowest...Highest. - * DMA priorities: - * 0...15 Highest...Lowest. - */ - -#define SPC563Mxx_MCUCONF - -/* - * HAL driver system settings. - */ -#define SPC5_NO_INIT FALSE -#define SPC5_CLK_BYPASS FALSE -#define SPC5_ALLOW_OVERCLOCK FALSE -#define SPC5_CLK_PREDIV_VALUE 2 -#define SPC5_CLK_MFD_VALUE 80 -#define SPC5_CLK_RFD SPC5_RFD_DIV4 -#define SPC5_FLASH_BIUCR (BIUCR_BANK1_TOO | \ - BIUCR_MASTER4_PREFETCH | \ - BIUCR_MASTER0_PREFETCH | \ - BIUCR_DPFEN | \ - BIUCR_IPFEN | \ - BIUCR_PFLIM_ON_MISS | \ - BIUCR_BFEN) - -/* - * EDMA driver settings. - */ -#define SPC5_EDMA_CR_SETTING (EDMA_CR_GRP3PRI(3) | \ - EDMA_CR_GRP2PRI(2) | \ - EDMA_CR_GRP1PRI(1) | \ - EDMA_CR_GRP0PRI(0) | \ - EDMA_CR_ERGA) -#define SPC5_EDMA_GROUP0_PRIORITIES \ - 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 -#define SPC5_EDMA_GROUP1_PRIORITIES \ - 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 -#define SPC5_EDMA_ERROR_IRQ_PRIO 2 -#define SPC5_EDMA_ERROR_HANDLER() chSysHalt() - -/* - * ADC driver settings. - */ -#define SPC5_ADC_USE_ADC0_Q0 FALSE -#define SPC5_ADC_USE_ADC0_Q1 FALSE -#define SPC5_ADC_USE_ADC0_Q2 FALSE -#define SPC5_ADC_USE_ADC1_Q3 FALSE -#define SPC5_ADC_USE_ADC1_Q4 FALSE -#define SPC5_ADC_USE_ADC1_Q5 FALSE -#define SPC5_ADC_FIFO0_DMA_IRQ_PRIO 12 -#define SPC5_ADC_FIFO1_DMA_IRQ_PRIO 12 -#define SPC5_ADC_FIFO2_DMA_IRQ_PRIO 12 -#define SPC5_ADC_FIFO3_DMA_IRQ_PRIO 12 -#define SPC5_ADC_FIFO4_DMA_IRQ_PRIO 12 -#define SPC5_ADC_FIFO5_DMA_IRQ_PRIO 12 -#define SPC5_ADC_CR_CLK_PS ADC_CR_CLK_PS(5) -#define SPC5_ADC_PUDCR {ADC_PUDCR_NONE, \ - ADC_PUDCR_NONE, \ - ADC_PUDCR_NONE, \ - ADC_PUDCR_NONE, \ - ADC_PUDCR_NONE, \ - ADC_PUDCR_NONE, \ - ADC_PUDCR_NONE, \ - ADC_PUDCR_NONE} - -/* - * SERIAL driver system settings. - */ -#define SPC5_USE_ESCIA TRUE -#define SPC5_USE_ESCIB TRUE -#define SPC5_ESCIA_PRIORITY 8 -#define SPC5_ESCIB_PRIORITY 8 - -/* - * SPI driver system settings. - */ -#define SPC5_SPI_USE_DSPI1 TRUE -#define SPC5_SPI_USE_DSPI2 TRUE -#define SPC5_SPI_DSPI1_MCR (SPC5_MCR_PCSIS0 | \ - SPC5_MCR_PCSIS1 | \ - SPC5_MCR_PCSIS2 | \ - SPC5_MCR_PCSIS3 | \ - SPC5_MCR_PCSIS4 | \ - SPC5_MCR_PCSIS5 | \ - SPC5_MCR_PCSIS6 | \ - SPC5_MCR_PCSIS7) -#define SPC5_SPI_DSPI2_MCR (SPC5_MCR_PCSIS0 | \ - SPC5_MCR_PCSIS1 | \ - SPC5_MCR_PCSIS2 | \ - SPC5_MCR_PCSIS3 | \ - SPC5_MCR_PCSIS4 | \ - SPC5_MCR_PCSIS5 | \ - SPC5_MCR_PCSIS6 | \ - SPC5_MCR_PCSIS7) -#define SPC5_SPI_DSPI1_DMA_IRQ_PRIO 10 -#define SPC5_SPI_DSPI2_DMA_IRQ_PRIO 10 -#define SPC5_SPI_DSPI1_IRQ_PRIO 10 -#define SPC5_SPI_DSPI2_IRQ_PRIO 10 -#define SPC5_SPI_DMA_ERROR_HOOK(spip) chSysHalt() diff --git a/testhal/SPC563Mxx/SPI/readme.txt b/testhal/SPC563Mxx/SPI/readme.txt deleted file mode 100644 index 1e0b7fcc0..000000000 --- a/testhal/SPC563Mxx/SPI/readme.txt +++ /dev/null @@ -1,25 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - SPI driver demo for SPC563Mxx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics SPC563Mxx microcontroller installed on -XPC56xx EVB Motherboard. - -** The Demo ** - -The application demonstrates the use of the SPC563Mxx SPI driver. - -** Board Setup ** - -** Build Procedure ** - -The demo has been tested using HighTec compiler. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. - - http://www.st.com diff --git a/testhal/SPC564Axx/ICU-PWM/Makefile b/testhal/SPC564Axx/ICU-PWM/Makefile deleted file mode 100644 index bdd72d6ac..000000000 --- a/testhal/SPC564Axx/ICU-PWM/Makefile +++ /dev/null @@ -1,121 +0,0 @@ -############################################################################## -# This file is automatically generated and can be overwritten, do no change -# this file manually. -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data. -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in VLE mode. -ifeq ($(USE_VLE),) - USE_VLE = yes -endif - -# Linker options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = out - -# Imported source files -include components/components.mak - -# Checks if there is a user mak file in the project directory. -ifneq ($(wildcard user.mak),) - include user.mak -endif - -# Define linker script file here -LDSCRIPT= application.ld - -# C sources here. -CSRC = $(LIB_C_SRC) \ - $(APP_C_SRC) \ - $(U_C_SRC) \ - ./components/components.c \ - ./main.c - -# C++ sources here. -CPPSRC = $(LIB_CPP_SRC) \ - $(APP_CPP_SRC) \ - $(U_CPP_SRC) - -# List ASM source files here -ASMSRC = $(LIB_ASM_SRC) \ - $(APP_ASM_SRC) \ - $(U_ASM_SRC) - -INCDIR = $(LIB_INCLUDES) \ - $(APP_INCLUDES) \ - ./components - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = e200zx -meabi -msdata=none -mnew-mnemonics -mregnames - -TRGT = ppc-vle- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -include C:/SPC5Studio/eclipse/plugins/com.st.tools.spc5.components.platform.spc564axx_1.0.0.201305101230/component/lib/rsc/rules.mk diff --git a/testhal/SPC564Axx/ICU-PWM/chconf.h b/testhal/SPC564Axx/ICU-PWM/chconf.h deleted file mode 100644 index b4c46c7f6..000000000 --- a/testhal/SPC564Axx/ICU-PWM/chconf.h +++ /dev/null @@ -1,536 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010, - 2011,2012 Giovanni Di Sirio. - - This file is part of ChibiOS/RT. - - ChibiOS/RT is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS/RT is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . - - --- - - A special exception to the GPL can be applied should you wish to distribute - a combined work that includes ChibiOS/RT, without being obliged to provide - the source code for any proprietary components. See the file exception.txt - for full details of how and when the exception can be applied. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES FALSE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/SPC564Axx/ICU-PWM/halconf.h b/testhal/SPC564Axx/ICU-PWM/halconf.h deleted file mode 100644 index 24462dafd..000000000 --- a/testhal/SPC564Axx/ICU-PWM/halconf.h +++ /dev/null @@ -1,367 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @name Drivers enable switches - */ -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU TRUE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name ADC driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION FALSE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name CAN driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name I2C driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION FALSE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name MAC driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name MMC_SPI driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name SDC driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 1 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name SERIAL driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name SERIAL_USB driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 64 -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name SPI driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION FALSE -#endif -/** @} */ - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/SPC564Axx/ICU-PWM/main.c b/testhal/SPC564Axx/ICU-PWM/main.c deleted file mode 100644 index 9f175890c..000000000 --- a/testhal/SPC564Axx/ICU-PWM/main.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void pwmpcb(PWMDriver *pwmp) { - - (void)pwmp; - palClearPad(PORT11, P11_LED1); -} - -static void pwmc1cb(PWMDriver *pwmp) { - - (void)pwmp; - palSetPad(PORT11, P11_LED1); -} - -static PWMConfig pwmcfg = { - 187500, /* 187500Hz PWM clock frequency.*/ - 19500, /* Initial PWM period 0.1040s.*/ - pwmpcb, - { - {PWM_OUTPUT_ACTIVE_HIGH, pwmc1cb} - }, - PWM_ALIGN_EDGE -}; - -icucnt_t last_width, last_period; - -static void icuwidthcb(ICUDriver *icup) { - - palSetPad(PORT11, P11_LED2); - last_width = icuGetWidth(icup); -} - -static void icuperiodcb(ICUDriver *icup) { - - palClearPad(PORT11, P11_LED2); - last_period = icuGetPeriod(icup); -} - -static ICUConfig icucfg = { - ICU_INPUT_ACTIVE_HIGH, - 187500, /* 187500Hz ICU clock frequency.*/ - icuwidthcb, - icuperiodcb, - NULL -}; - -/* - * Application entry point. - */ -int main(void) { - - /* Initialization of all the imported components in the order specified in - the application wizard. The function is generated automatically.*/ - componentsInit(); - - palClearPad(PORT11, P11_LED4); - - /* - * Initializes the PWM driver 6 and ICU driver 3. - * PIN78 is the PWM output. - * PIN65 is the ICU input. - * The two pins have to be externally connected together. - */ - - /* Sets PIN65 alternative function.*/ - SIU.PCR[181].R = 0b0000010100001100; - - /* Sets PIN78 alternative function.*/ - SIU.PCR[193].R = 0b0000011000001100; - - icuStart(&ICUD3, &icucfg); - icuEnable(&ICUD3); - pwmStart(&PWMD6, &pwmcfg); - - chThdSleepMilliseconds(2000); - - /* - * Starts the PWM channel 0 using 75% duty cycle. - */ - pwmEnableChannel(&PWMD6, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD6, 7500)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 50% duty cycle. - */ - pwmEnableChannel(&PWMD6, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD6, 5000)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 25% duty cycle. - */ - pwmEnableChannel(&PWMD6, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD6, 2500)); - chThdSleepMilliseconds(5000); - - /* - * Changes PWM period and the PWM channel 0 to 50% duty cycle. - */ - pwmChangePeriod(&PWMD6, 25000); - pwmEnableChannel(&PWMD6, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD6, 5000)); - chThdSleepMilliseconds(5000); - - /* - * Disables PWM channel 0 and stops the drivers. - */ - pwmDisableChannel(&PWMD6, 0); - pwmStop(&PWMD6); - - /* - * Disables and stops the ICU drivers. - */ - - icuDisable(&ICUD3); - icuStop(&ICUD3); - - palClearPad(PORT11, P11_LED3); - palClearPad(PORT11, P11_LED4); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/SPC564Axx/ICU-PWM/mcuconf.h b/testhal/SPC564Axx/ICU-PWM/mcuconf.h deleted file mode 100644 index a2e46cd16..000000000 --- a/testhal/SPC564Axx/ICU-PWM/mcuconf.h +++ /dev/null @@ -1,108 +0,0 @@ -/* - SPC5 HAL - Copyright (C) 2013 STMicroelectronics - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * SPC564Axx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 1...15 Lowest...Highest. - */ - -#define SPC564Axx_MCUCONF - -/* - * HAL driver system settings. - */ -#define SPC5_NO_INIT FALSE -#define SPC5_CLK_BYPASS FALSE -#define SPC5_ALLOW_OVERCLOCK FALSE -#define SPC5_CLK_PREDIV_VALUE 2 -#define SPC5_CLK_MFD_VALUE 75 -#define SPC5_CLK_RFD SPC5_RFD_DIV2 -#define SPC5_FLASH_BIUCR (BIUCR_BANK1_TOO | \ - BIUCR_MASTER4_PREFETCH | \ - BIUCR_MASTER0_PREFETCH | \ - BIUCR_DPFEN | \ - BIUCR_IPFEN | \ - BIUCR_PFLIM_ON_MISS | \ - BIUCR_BFEN) - -/* - * ADC driver settings. - */ -#define SPC5_ADC_USE_ADC0_Q0 FALSE -#define SPC5_ADC_USE_ADC0_Q1 FALSE -#define SPC5_ADC_USE_ADC0_Q2 FALSE -#define SPC5_ADC_USE_ADC1_Q3 FALSE -#define SPC5_ADC_USE_ADC1_Q4 FALSE -#define SPC5_ADC_USE_ADC1_Q5 FALSE -#define SPC5_ADC_FIFO0_DMA_PRIO 12 -#define SPC5_ADC_FIFO1_DMA_PRIO 12 -#define SPC5_ADC_FIFO2_DMA_PRIO 12 -#define SPC5_ADC_FIFO3_DMA_PRIO 12 -#define SPC5_ADC_FIFO4_DMA_PRIO 12 -#define SPC5_ADC_FIFO5_DMA_PRIO 12 -#define SPC5_ADC_FIFO0_DMA_IRQ_PRIO 12 -#define SPC5_ADC_FIFO1_DMA_IRQ_PRIO 12 -#define SPC5_ADC_FIFO2_DMA_IRQ_PRIO 12 -#define SPC5_ADC_FIFO3_DMA_IRQ_PRIO 12 -#define SPC5_ADC_FIFO4_DMA_IRQ_PRIO 12 -#define SPC5_ADC_FIFO5_DMA_IRQ_PRIO 12 -#define SPC5_ADC_CR_CLK_PS ADC_CR_CLK_PS(5) -#define SPC5_ADC_PUDCR {ADC_PUDCR_NONE,ADC_PUDCR_NONE,ADC_PUDCR_NONE,ADC_PUDCR_NONE,ADC_PUDCR_NONE,ADC_PUDCR_NONE,ADC_PUDCR_NONE,ADC_PUDCR_NONE} - -/* - * SERIAL driver system settings. - */ -#define SPC5_USE_ESCIA TRUE -#define SPC5_USE_ESCIB FALSE -#define SPC5_ESCIA_PRIORITY 8 -#define SPC5_ESCIB_PRIORITY 8 - -/* - * ICU - PWM driver system settings. - */ -#define SPC5_ICU_USE_EMIOS_CH0 TRUE -#define SPC5_ICU_USE_EMIOS_CH1 TRUE -#define SPC5_ICU_USE_EMIOS_CH2 TRUE -#define SPC5_ICU_USE_EMIOS_CH3 TRUE -#define SPC5_ICU_USE_EMIOS_CH4 TRUE -#define SPC5_ICU_USE_EMIOS_CH5 TRUE -#define SPC5_ICU_USE_EMIOS_CH6 TRUE -#define SPC5_ICU_USE_EMIOS_CH7 TRUE -#define SPC5_ICU_USE_EMIOS_CH8 TRUE -#define SPC5_ICU_USE_EMIOS_CH16 TRUE -#define SPC5_ICU_USE_EMIOS_CH17 TRUE -#define SPC5_ICU_USE_EMIOS_CH18 TRUE - -#define SPC5_PWM_USE_EMIOS_CH9 TRUE -#define SPC5_PWM_USE_EMIOS_CH10 TRUE -#define SPC5_PWM_USE_EMIOS_CH11 TRUE -#define SPC5_PWM_USE_EMIOS_CH12 TRUE -#define SPC5_PWM_USE_EMIOS_CH13 TRUE -#define SPC5_PWM_USE_EMIOS_CH14 TRUE -#define SPC5_PWM_USE_EMIOS_CH15 TRUE -#define SPC5_PWM_USE_EMIOS_CH19 TRUE -#define SPC5_PWM_USE_EMIOS_CH20 TRUE -#define SPC5_PWM_USE_EMIOS_CH21 TRUE -#define SPC5_PWM_USE_EMIOS_CH22 TRUE -#define SPC5_PWM_USE_EMIOS_CH23 TRUE - -#define SPC5_EMIOS_GLOBAL_PRESCALER 200 diff --git a/testhal/SPC564Axx/ICU-PWM/readme.txt b/testhal/SPC564Axx/ICU-PWM/readme.txt deleted file mode 100644 index 01668f205..000000000 --- a/testhal/SPC564Axx/ICU-PWM/readme.txt +++ /dev/null @@ -1,27 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - ICU-PWM driver demo for SPC564Axx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics SPC564Axx microcontroller installed on -XPC56xx EVB Motherboard. - -** The Demo ** - -The application demonstrates the use of the SPC564Axx ICU and PWM drivers. - -** Board Setup ** - -Connect PIN65 and PIN78 together. - -** Build Procedure ** - -The demo has been tested using HighTec compiler. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. - - http://www.st.com diff --git a/testhal/SPC564Axx/SPI/.cproject b/testhal/SPC564Axx/SPI/.cproject deleted file mode 100644 index a4ae17c6d..000000000 --- a/testhal/SPC564Axx/SPI/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/SPC564Axx/SPI/.project b/testhal/SPC564Axx/SPI/.project deleted file mode 100644 index bb29d6206..000000000 --- a/testhal/SPC564Axx/SPI/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - SPC564Axx-SPI - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_EVB_SPC564A - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/SPC564Axx/SPI/Makefile b/testhal/SPC564Axx/SPI/Makefile deleted file mode 100644 index 200b9191d..000000000 --- a/testhal/SPC564Axx/SPI/Makefile +++ /dev/null @@ -1,168 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data. -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# If enabled, this option allows to compile the application in VLE mode. -ifeq ($(USE_VLE),) - USE_VLE = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_EVB_SPC564A/board.mk -include $(CHIBIOS)/os/hal/platforms/SPC564Axx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/PPC/SPC564Axx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/SPC564A70.ld - -# C sources here. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - $(CHIBIOS)/os/various/shell.c \ - $(CHIBIOS)/os/various/chprintf.c \ - main.c - -# C++ sources here. -CPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -#MCU = e500mc -meabi -msdata=none -mnew-mnemonics -mregnames -MCU = e200zx -meabi -msdata=none -mnew-mnemonics -mregnames - -#TRGT = powerpc-eabi- -TRGT = ppc-vle- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = -D_SPC564A70L7_ - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -include $(CHIBIOS)/os/ports/GCC/PPC/rules.mk diff --git a/testhal/SPC564Axx/SPI/chconf.h b/testhal/SPC564Axx/SPI/chconf.h deleted file mode 100644 index dc956ef13..000000000 --- a/testhal/SPC564Axx/SPI/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/SPC564Axx/SPI/halconf.h b/testhal/SPC564Axx/SPI/halconf.h deleted file mode 100644 index fdc079aef..000000000 --- a/testhal/SPC564Axx/SPI/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/SPC564Axx/SPI/main.c b/testhal/SPC564Axx/SPI/main.c deleted file mode 100644 index 46378a5f8..000000000 --- a/testhal/SPC564Axx/SPI/main.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * Maximum speed SPI configuration. - */ -static const SPIConfig hs_spicfg = { - NULL, - 0, - 0, - SPC5_CTAR_CSSCK_DIV2 | SPC5_CTAR_ASC_DIV2 | SPC5_CTAR_FMSZ(8) | - SPC5_CTAR_PBR_PRE2 | SPC5_CTAR_BR_DIV2, /* CTAR0. */ - SPC5_PUSHR_CONT | SPC5_PUSHR_PCS(1) /* PUSHR. */ -}; - -/* - * Low speed SPI configuration (328.125kHz, CPHA=0, CPOL=0, MSb first). - */ -static const SPIConfig ls_spicfg = { - NULL, - 0, - 0, - SPC5_CTAR_CSSCK_DIV64 | SPC5_CTAR_ASC_DIV64 | SPC5_CTAR_FMSZ(8) | - SPC5_CTAR_PBR_PRE2 | SPC5_CTAR_BR_DIV256, /* CTAR0. */ - SPC5_PUSHR_CONT | SPC5_PUSHR_PCS(0) /* PUSHR. */ -}; - -/* - * SPI TX and RX buffers. - */ -static uint8_t txbuf[512]; -static uint8_t rxbuf[512]; - -/* - * SPI bus contender 1. - */ -static WORKING_AREA(spi_thread_1_wa, 256); -static msg_t spi_thread_1(void *p) { - - (void)p; - chRegSetThreadName("SPI thread 1"); - while (TRUE) { - spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ - palClearPad(PORT11, P11_LED1); /* LED ON. */ - spiStart(&SPID2, &hs_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID2); /* Slave Select assertion. */ - spiExchange(&SPID2, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID2); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID2); /* Ownership release. */ - } - return 0; -} - -/* - * SPI bus contender 2. - */ -static WORKING_AREA(spi_thread_2_wa, 256); -static msg_t spi_thread_2(void *p) { - - (void)p; - chRegSetThreadName("SPI thread 2"); - while (TRUE) { - spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ - palSetPad(PORT11, P11_LED1); /* LED OFF. */ - spiStart(&SPID2, &ls_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID2); /* Slave Select assertion. */ - spiExchange(&SPID2, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID2); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID2); /* Ownership release. */ - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Prepare transmit pattern. - */ - for (i = 0; i < sizeof(txbuf); i++) - txbuf[i] = (uint8_t)i; - - /* Starting driver for test, DSPI_B I/O pins setup.*/ - spiStart(&SPID2, &ls_spicfg); - SIU.PCR[102].R = PAL_MODE_OUTPUT_ALTERNATE(1); /* SCK */ - SIU.PCR[103].R = PAL_MODE_OUTPUT_ALTERNATE(1); /* SIN */ - SIU.PCR[104].R = PAL_MODE_OUTPUT_ALTERNATE(1); /* SOUT */ - SIU.PCR[105].R = PAL_MODE_OUTPUT_ALTERNATE(1); /* PCS[0] */ - SIU.PCR[106].R = PAL_MODE_OUTPUT_ALTERNATE(1); /* PCS[1] */ - - /* Testing sending and receiving at the same time.*/ - spiExchange(&SPID2, 4, txbuf, rxbuf); - spiExchange(&SPID2, 32, txbuf, rxbuf); - spiExchange(&SPID2, 512, txbuf, rxbuf); - - /* Testing clock pulses without data buffering.*/ - spiIgnore(&SPID2, 4); - spiIgnore(&SPID2, 32); - - /* Testing sending data ignoring incoming data.*/ - spiSend(&SPID2, 4, txbuf); - spiSend(&SPID2, 32, txbuf); - - /* Testing receiving data while sending idle bits (high level).*/ - spiReceive(&SPID2, 4, rxbuf); - spiReceive(&SPID2, 32, rxbuf); - - /* Testing stop procedure.*/ - spiStop(&SPID2); - - /* - * Starting the transmitter and receiver threads. - */ - chThdCreateStatic(spi_thread_1_wa, sizeof(spi_thread_1_wa), - NORMALPRIO + 1, spi_thread_1, NULL); - chThdCreateStatic(spi_thread_2_wa, sizeof(spi_thread_2_wa), - NORMALPRIO + 1, spi_thread_2, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - palTogglePad(PORT11, P11_LED2); - } - return 0; -} diff --git a/testhal/SPC564Axx/SPI/mcuconf.h b/testhal/SPC564Axx/SPI/mcuconf.h deleted file mode 100644 index 2fccca076..000000000 --- a/testhal/SPC564Axx/SPI/mcuconf.h +++ /dev/null @@ -1,139 +0,0 @@ -/* - SPC5 HAL - Copyright (C) 2013 STMicroelectronics - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * SPC563Mxx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 1...15 Lowest...Highest. - * DMA priorities: - * 0...15 Highest...Lowest. - */ - -#define SPC564Axx_MCUCONF - -/* - * HAL driver system settings. - */ -#define SPC5_NO_INIT FALSE -#define SPC5_CLK_BYPASS FALSE -#define SPC5_ALLOW_OVERCLOCK FALSE -#define SPC5_CLK_PREDIV_VALUE 2 -#define SPC5_CLK_MFD_VALUE 75 -#define SPC5_CLK_RFD SPC5_RFD_DIV2 -#define SPC5_FLASH_BIUCR (BIUCR_BANK1_TOO | \ - BIUCR_MASTER4_PREFETCH | \ - BIUCR_MASTER0_PREFETCH | \ - BIUCR_DPFEN | \ - BIUCR_IPFEN | \ - BIUCR_PFLIM_ON_MISS | \ - BIUCR_BFEN) - -/* - * EDMA driver settings. - */ -#define SPC5_EDMA_CR_SETTING (EDMA_CR_GRP3PRI(3) | \ - EDMA_CR_GRP2PRI(2) | \ - EDMA_CR_GRP1PRI(1) | \ - EDMA_CR_GRP0PRI(0) | \ - EDMA_CR_ERGA) -#define SPC5_EDMA_GROUP0_PRIORITIES \ - 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 -#define SPC5_EDMA_GROUP1_PRIORITIES \ - 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 -#define SPC5_EDMA_GROUP2_PRIORITIES \ - 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 -#define SPC5_EDMA_GROUP3_PRIORITIES \ - 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 -#define SPC5_EDMA_ERROR_IRQ_PRIO 2 -#define SPC5_EDMA_ERROR_HANDLER() chSysHalt() - -/* - * ADC driver settings. - */ -#define SPC5_ADC_USE_ADC0_Q0 FALSE -#define SPC5_ADC_USE_ADC0_Q1 FALSE -#define SPC5_ADC_USE_ADC0_Q2 FALSE -#define SPC5_ADC_USE_ADC1_Q3 FALSE -#define SPC5_ADC_USE_ADC1_Q4 FALSE -#define SPC5_ADC_USE_ADC1_Q5 FALSE -#define SPC5_ADC_FIFO0_DMA_IRQ_PRIO 12 -#define SPC5_ADC_FIFO1_DMA_IRQ_PRIO 12 -#define SPC5_ADC_FIFO2_DMA_IRQ_PRIO 12 -#define SPC5_ADC_FIFO3_DMA_IRQ_PRIO 12 -#define SPC5_ADC_FIFO4_DMA_IRQ_PRIO 12 -#define SPC5_ADC_FIFO5_DMA_IRQ_PRIO 12 -#define SPC5_ADC_CR_CLK_PS ADC_CR_CLK_PS(10) -#define SPC5_ADC_PUDCR {ADC_PUDCR_NONE, \ - ADC_PUDCR_NONE, \ - ADC_PUDCR_NONE, \ - ADC_PUDCR_NONE, \ - ADC_PUDCR_NONE, \ - ADC_PUDCR_NONE, \ - ADC_PUDCR_NONE, \ - ADC_PUDCR_NONE} - -/* - * SERIAL driver system settings. - */ -#define SPC5_USE_ESCIA TRUE -#define SPC5_USE_ESCIB TRUE -#define SPC5_USE_ESCIC TRUE -#define SPC5_ESCIA_PRIORITY 8 -#define SPC5_ESCIB_PRIORITY 8 -#define SPC5_ESCIC_PRIORITY 8 - -/* - * SPI driver system settings. - */ -#define SPC5_SPI_USE_DSPI1 TRUE -#define SPC5_SPI_USE_DSPI2 TRUE -#define SPC5_SPI_USE_DSPI3 TRUE -#define SPC5_SPI_DSPI1_MCR (SPC5_MCR_PCSIS0 | \ - SPC5_MCR_PCSIS1 | \ - SPC5_MCR_PCSIS2 | \ - SPC5_MCR_PCSIS3 | \ - SPC5_MCR_PCSIS4 | \ - SPC5_MCR_PCSIS5 | \ - SPC5_MCR_PCSIS6 | \ - SPC5_MCR_PCSIS7) -#define SPC5_SPI_DSPI2_MCR (SPC5_MCR_PCSIS0 | \ - SPC5_MCR_PCSIS1 | \ - SPC5_MCR_PCSIS2 | \ - SPC5_MCR_PCSIS3 | \ - SPC5_MCR_PCSIS4 | \ - SPC5_MCR_PCSIS5 | \ - SPC5_MCR_PCSIS6 | \ - SPC5_MCR_PCSIS7) -#define SPC5_SPI_DSPI3_MCR (SPC5_MCR_PCSIS0 | \ - SPC5_MCR_PCSIS1 | \ - SPC5_MCR_PCSIS2 | \ - SPC5_MCR_PCSIS3 | \ - SPC5_MCR_PCSIS4 | \ - SPC5_MCR_PCSIS5 | \ - SPC5_MCR_PCSIS6 | \ - SPC5_MCR_PCSIS7) -#define SPC5_SPI_DSPI1_DMA_IRQ_PRIO 10 -#define SPC5_SPI_DSPI2_DMA_IRQ_PRIO 10 -#define SPC5_SPI_DSPI3_DMA_IRQ_PRIO 10 -#define SPC5_SPI_DSPI1_IRQ_PRIO 10 -#define SPC5_SPI_DSPI2_IRQ_PRIO 10 -#define SPC5_SPI_DSPI3_IRQ_PRIO 10 -#define SPC5_SPI_DMA_ERROR_HOOK(spip) chSysHalt() diff --git a/testhal/SPC564Axx/SPI/readme.txt b/testhal/SPC564Axx/SPI/readme.txt deleted file mode 100644 index cd9368fb1..000000000 --- a/testhal/SPC564Axx/SPI/readme.txt +++ /dev/null @@ -1,25 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - SPI driver demo for SPC564Axx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics SPC564Axx microcontroller installed on -XPC56xx EVB Motherboard. - -** The Demo ** - -The application demonstrates the use of the SPC564Axx SPI driver. - -** Board Setup ** - -** Build Procedure ** - -The demo has been tested using HighTec compiler. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. - - http://www.st.com diff --git a/testhal/SPC56ELxx/CAN/.cproject b/testhal/SPC56ELxx/CAN/.cproject deleted file mode 100644 index dd958292f..000000000 --- a/testhal/SPC56ELxx/CAN/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/SPC56ELxx/CAN/.project b/testhal/SPC56ELxx/CAN/.project deleted file mode 100644 index 80fb08c6f..000000000 --- a/testhal/SPC56ELxx/CAN/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - SPC56ELxx-PWM-ICU - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_EVB_SPC56EL - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/SPC56ELxx/CAN/Makefile b/testhal/SPC56ELxx/CAN/Makefile deleted file mode 100644 index 79d8dd648..000000000 --- a/testhal/SPC56ELxx/CAN/Makefile +++ /dev/null @@ -1,139 +0,0 @@ -############################################################################## -# This file is automatically generated and can be overwritten, do no change -# this file manually. -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -fno-exceptions -endif - -# Enable this if you want the linker to remove unused code and data. -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in VLE mode. -ifeq ($(USE_VLE),) - USE_VLE = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = out - -# Imported source files -include components/components.mak - -# Checks if there is a user mak file in the project directory. -ifneq ($(wildcard user.mak),) - include user.mak -endif - -# Define linker script file here -LDSCRIPT= application.ld - -# C sources here. -CSRC = $(LIB_C_SRC) \ - $(APP_C_SRC) \ - $(U_C_SRC) \ - ./components/components.c \ - ./main.c - -# C++ sources here. -CPPSRC = $(LIB_CPP_SRC) \ - $(APP_CPP_SRC) \ - $(U_CPP_SRC) - -# List ASM source files here -ASMSRC = $(LIB_ASM_SRC) \ - $(APP_ASM_SRC) \ - $(U_ASM_SRC) - -INCDIR = $(LIB_INCLUDES) \ - $(APP_INCLUDES) \ - ./components - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = e200zx -meabi -msdata=none -mnew-mnemonics -mregnames - -TRGT = ppc-vle- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = -DSPC56EL60L3 - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -include C:/SPC5Studio/eclipse/plugins/com.st.tools.spc5.components.platform.spc56elxx_1.0.0.201302201417/component/lib/rsc/rules.mk diff --git a/testhal/SPC56ELxx/CAN/chconf.h b/testhal/SPC56ELxx/CAN/chconf.h deleted file mode 100644 index 8800269d4..000000000 --- a/testhal/SPC56ELxx/CAN/chconf.h +++ /dev/null @@ -1,529 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010, - 2011,2012,2013 Giovanni Di Sirio. - - This file is part of ChibiOS/RT. - - ChibiOS/RT is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS/RT is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE FALSE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/SPC56ELxx/CAN/halconf.h b/testhal/SPC56ELxx/CAN/halconf.h deleted file mode 100644 index 7c9fe78a8..000000000 --- a/testhal/SPC56ELxx/CAN/halconf.h +++ /dev/null @@ -1,371 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010, - 2011,2012,2013 Giovanni Di Sirio. - - This file is part of ChibiOS/RT. - - ChibiOS/RT is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS/RT is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @name Drivers enable switches - */ -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN TRUE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU TRUE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name ADC driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION FALSE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name CAN driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE FALSE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name I2C driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION FALSE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name MAC driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name MMC_SPI driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name SDC driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 1 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name SERIAL driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name SERIAL_USB driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 64 -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name SPI driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION FALSE -#endif -/** @} */ - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/SPC56ELxx/CAN/main.c b/testhal/SPC56ELxx/CAN/main.c deleted file mode 100644 index a0750898a..000000000 --- a/testhal/SPC56ELxx/CAN/main.c +++ /dev/null @@ -1,148 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -struct can_instance { - CANDriver *canp; - uint32_t led; -}; - -static const struct can_instance can1 = {&CAND1, PD_LED1}; - -/* - * Internal loopback mode, 1MBaud. - * See chapter 25 on the SPC5 reference manual. - */ -static const CANConfig cancfg = { - CAN_MCR_WRN_EN, - CAN_CTRL_LPB | CAN_CTRL_PROPSEG(2) | CAN_CTRL_PSEG2(7) | - CAN_CTRL_PSEG1(3) | CAN_CTRL_PRESDIV(3) -#if SPC5_CAN_USE_FILTERS - , - { - {0, 0x00000001}, - {1, 0x01234567}, - {0, 0x00000000}, - {0, 0x00000003}, - {0, 0x00000004}, - {0, 0x00000005}, - {0, 0x00000006}, - {0, 0x00000007} - } -#endif -}; - -#if SPC5_CAN_USE_FILTERS -flagsmask_t rxFlag; -#endif - -/* - * Receiver thread. - */ -static WORKING_AREA(can_rx_wa, 256); -static msg_t can_rx(void *p) { - struct can_instance *cip = p; - EventListener el; - CANRxFrame rxmsg; - (void)p; - chRegSetThreadName("receiver"); - chEvtRegister(&cip->canp->rxfull_event, &el, 0); -#if SPC5_CAN_USE_FILTERS - rxFlag = chEvtGetAndClearFlagsI(&el); -#endif - while(!chThdShouldTerminate()) { - if (chEvtWaitAnyTimeout(ALL_EVENTS, MS2ST(100)) == 0) - continue; -#if !SPC5_CAN_USE_FILTERS - while (canReceive(cip->canp, CAN_ANY_MAILBOX, - &rxmsg, TIME_IMMEDIATE) == RDY_OK) { - /* Process message.*/ - palTogglePad(PORT_D, cip->led); - } -#else - while (canReceive(cip->canp, rxFlag, - &rxmsg, TIME_IMMEDIATE) == RDY_OK) { - /* Process message.*/ - palTogglePad(PORT_D, cip->led); - } -#endif - } - chEvtUnregister(&CAND1.rxfull_event, &el); - return 0; -} - -/* - * Transmitter thread. - */ -static WORKING_AREA(can_tx_wa, 256); -static msg_t can_tx(void * p) { - CANTxFrame txmsg; - - (void)p; - chRegSetThreadName("transmitter"); - txmsg.IDE = CAN_IDE_EXT; - txmsg.EID = 0x01234567; - txmsg.RTR = CAN_RTR_DATA; - txmsg.LENGTH = 8; - txmsg.data32[0] = 0x55AA55AA; - txmsg.data32[1] = 0x00FF00FF; - - while (!chThdShouldTerminate()) { - canTransmit(&CAND1, 1, &txmsg, MS2ST(100)); - palTogglePad(PORT_D, PD_LED2); - chThdSleepMilliseconds(500); - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the CAN driver 1. - */ - canStart(&CAND1, &cancfg); - - /* - * Starting the transmitter and receiver threads. - */ - chThdCreateStatic(can_rx_wa, sizeof(can_rx_wa), NORMALPRIO + 7, - can_rx, (void *)&can1); - chThdCreateStatic(can_tx_wa, sizeof(can_tx_wa), NORMALPRIO + 7, - can_tx, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/SPC56ELxx/CAN/mcuconf.h b/testhal/SPC56ELxx/CAN/mcuconf.h deleted file mode 100644 index 212082fc9..000000000 --- a/testhal/SPC56ELxx/CAN/mcuconf.h +++ /dev/null @@ -1,236 +0,0 @@ -/* - * Licensed under ST Liberty SW License Agreement V2, (the "License"); - * You may not use this file except in compliance with the License. - * You may obtain a copy of the License at: - * - * http://www.st.com/software_license_agreement_liberty_v2 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -/* - * SPC56ELxx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 1...15 Lowest...Highest. - */ - -#define SPC56ELxx_MCUCONF - -/* - * HAL driver system settings. - */ -#define SPC5_NO_INIT FALSE -#define SPC5_ALLOW_OVERCLOCK FALSE -#define SPC5_DISABLE_WATCHDOG TRUE -#define SPC5_FMPLL0_CLK_SRC SPC5_FMPLL_SRC_XOSC -#define SPC5_FMPLL0_IDF_VALUE 5 -#define SPC5_FMPLL0_NDIV_VALUE 32 -#define SPC5_FMPLL0_ODF SPC5_FMPLL_ODF_DIV4 -#define SPC5_FMPLL1_CLK_SRC SPC5_FMPLL_SRC_XOSC -#define SPC5_FMPLL1_IDF_VALUE 5 -#define SPC5_FMPLL1_NDIV_VALUE 60 -#define SPC5_FMPLL1_ODF SPC5_FMPLL_ODF_DIV4 -#define SPC5_SYSCLK_DIVIDER_VALUE 2 -#define SPC5_AUX0CLK_SRC SPC5_CGM_SS_FMPLL0 -#define SPC5_MCONTROL_DIVIDER_VALUE 2 -#define SPC5_SWG_DIVIDER_VALUE 2 -#define SPC5_AUX1CLK_SRC SPC5_CGM_SS_FMPLL1 -#define SPC5_FLEXRAY_DIVIDER_VALUE 2 -#define SPC5_AUX2CLK_SRC SPC5_CGM_SS_FMPLL1 -#define SPC5_FLEXCAN_DIVIDER_VALUE 2 -#define SPC5_ME_ME_BITS (SPC5_ME_ME_RUN1 | \ - SPC5_ME_ME_RUN2 | \ - SPC5_ME_ME_RUN3 | \ - SPC5_ME_ME_HALT0 | \ - SPC5_ME_ME_STOP0) -#define SPC5_ME_SAFE_MC_BITS (SPC5_ME_MC_PDO) -#define SPC5_ME_DRUN_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_FLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_FLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN1_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_FLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN2_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_FLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN3_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_FLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_HALT0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_FLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_STOP0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_FLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN_PC3_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC4_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC5_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC6_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC7_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_LP_PC4_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_ME_LP_PC5_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_ME_LP_PC6_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_ME_LP_PC7_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_CLOCK_FAILURE_HOOK() chSysHalt() - -/* - * SERIAL driver system settings. - */ -#define SPC5_SERIAL_USE_LINFLEX0 TRUE -#define SPC5_SERIAL_USE_LINFLEX1 TRUE -#define SPC5_SERIAL_LINFLEX0_PRIORITY 8 -#define SPC5_SERIAL_LINFLEX1_PRIORITY 8 -#define SPC5_SERIAL_LINFLEX0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SERIAL_LINFLEX0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) -#define SPC5_SERIAL_LINFLEX1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SERIAL_LINFLEX1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -/* - * PWM driver system settings. - */ -#define SPC5_PWM_USE_SMOD0 TRUE -#define SPC5_PWM_USE_SMOD1 FALSE -#define SPC5_PWM_USE_SMOD2 FALSE -#define SPC5_PWM_USE_SMOD3 FALSE -#define SPC5_PWM_SMOD0_PRIORITY 7 -#define SPC5_PWM_SMOD1_PRIORITY 7 -#define SPC5_PWM_SMOD2_PRIORITY 7 -#define SPC5_PWM_SMOD3_PRIORITY 7 -#define SPC5_PWM_FLEXPWM0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_PWM_FLEXPWM0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -#define SPC5_PWM_USE_SMOD4 FALSE -#define SPC5_PWM_USE_SMOD5 FALSE -#define SPC5_PWM_USE_SMOD6 FALSE -#define SPC5_PWM_USE_SMOD7 FALSE -#define SPC5_PWM_SMOD4_PRIORITY 7 -#define SPC5_PWM_SMOD5_PRIORITY 7 -#define SPC5_PWM_SMOD6_PRIORITY 7 -#define SPC5_PWM_SMOD7_PRIORITY 7 -#define SPC5_PWM_FLEXPWM1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_PWM_FLEXPWM1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -/* - * ICU driver system settings. - */ -#define SPC5_ICU_USE_SMOD0 TRUE -#define SPC5_ICU_USE_SMOD1 FALSE -#define SPC5_ICU_USE_SMOD2 FALSE -#define SPC5_ICU_USE_SMOD3 FALSE -#define SPC5_ICU_USE_SMOD4 FALSE -#define SPC5_ICU_USE_SMOD5 FALSE -#define SPC5_ICU_ETIMER0_PRIORITY 7 -#define SPC5_ICU_ETIMER0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_ICU_ETIMER0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -#define SPC5_ICU_USE_SMOD6 FALSE -#define SPC5_ICU_USE_SMOD7 FALSE -#define SPC5_ICU_USE_SMOD8 FALSE -#define SPC5_ICU_USE_SMOD9 FALSE -#define SPC5_ICU_USE_SMOD10 FALSE -#define SPC5_ICU_USE_SMOD11 FALSE -#define SPC5_ICU_ETIMER1_PRIORITY 7 -#define SPC5_ICU_ETIMER1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_ICU_ETIMER1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -#define SPC5_ICU_USE_SMOD12 FALSE -#define SPC5_ICU_USE_SMOD13 FALSE -#define SPC5_ICU_USE_SMOD14 FALSE -#define SPC5_ICU_USE_SMOD15 FALSE -#define SPC5_ICU_USE_SMOD16 FALSE -#define SPC5_ICU_USE_SMOD17 TRUE -#define SPC5_ICU_ETIMER2_PRIORITY 7 -#define SPC5_ICU_ETIMER2_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_ICU_ETIMER2_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -/* - * CAN driver system settings. - */ -#define SPC5_CAN_USE_FILTERS TRUE - -#define SPC5_CAN_USE_FLEXCAN0 TRUE -#define SPC5_CAN_FLEXCAN0_PRIORITY 11 -#define SPC5_CAN_FLEXCAN0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_CAN_FLEXCAN0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -#define SPC5_CAN_USE_FLEXCAN1 FALSE -#define SPC5_CAN_FLEXCAN1_PRIORITY 11 -#define SPC5_CAN_FLEXCAN1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_CAN_FLEXCAN1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) diff --git a/testhal/SPC56ELxx/CAN/readme.txt b/testhal/SPC56ELxx/CAN/readme.txt deleted file mode 100644 index 036a5502e..000000000 --- a/testhal/SPC56ELxx/CAN/readme.txt +++ /dev/null @@ -1,27 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - CAN drivers demo for SPC56ELxx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics SPC56ELxx microcontroller installed on -XPC56xx EVB Motherboard. - -** The Demo ** - -The application demonstrates the use of the SPC56ELxx CAN drivers. - -** Board Setup ** - -- Enable LED1 and LED2. - -** Build Procedure ** - -The demo has been tested using HighTec compiler. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. - - http://www.st.com diff --git a/testhal/SPC56ELxx/PWM-ICU/.cproject b/testhal/SPC56ELxx/PWM-ICU/.cproject deleted file mode 100644 index dd958292f..000000000 --- a/testhal/SPC56ELxx/PWM-ICU/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/SPC56ELxx/PWM-ICU/.project b/testhal/SPC56ELxx/PWM-ICU/.project deleted file mode 100644 index 80fb08c6f..000000000 --- a/testhal/SPC56ELxx/PWM-ICU/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - SPC56ELxx-PWM-ICU - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_EVB_SPC56EL - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/SPC56ELxx/PWM-ICU/Makefile b/testhal/SPC56ELxx/PWM-ICU/Makefile deleted file mode 100644 index a6f7718ca..000000000 --- a/testhal/SPC56ELxx/PWM-ICU/Makefile +++ /dev/null @@ -1,167 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data. -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# If enabled, this option allows to compile the application in VLE mode. -ifeq ($(USE_VLE),) - USE_VLE = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_EVB_SPC56EL/board.mk -include $(CHIBIOS)/os/hal/platforms/SPC56ELxx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/PPC/SPC56ELxx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/SPC56EL60_LSM.ld - -# C sources here. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - $(CHIBIOS)/os/various/shell.c \ - $(CHIBIOS)/os/various/chprintf.c \ - main.c - -# C++ sources here. -CPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -#MCU = e500mc -meabi -msdata=none -mnew-mnemonics -mregnames -MCU = e200zx -meabi -msdata=none -mnew-mnemonics -mregnames - -#TRGT = powerpc-eabi- -TRGT = ppc-vle- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -include $(CHIBIOS)/os/ports/GCC/PPC/rules.mk diff --git a/testhal/SPC56ELxx/PWM-ICU/chconf.h b/testhal/SPC56ELxx/PWM-ICU/chconf.h deleted file mode 100644 index 50d8024a1..000000000 --- a/testhal/SPC56ELxx/PWM-ICU/chconf.h +++ /dev/null @@ -1,525 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/SPC56ELxx/PWM-ICU/halconf.h b/testhal/SPC56ELxx/PWM-ICU/halconf.h deleted file mode 100644 index 09022b9e7..000000000 --- a/testhal/SPC56ELxx/PWM-ICU/halconf.h +++ /dev/null @@ -1,367 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @name Drivers enable switches - */ -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU TRUE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name ADC driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION FALSE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name CAN driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name I2C driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION FALSE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name MAC driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name MMC_SPI driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name SDC driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 1 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name SERIAL driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name SERIAL_USB driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 64 -#endif -/** @} */ - -/*===========================================================================*/ -/** - * @name SPI driver related setting - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION FALSE -#endif -/** @} */ - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/SPC56ELxx/PWM-ICU/main.c b/testhal/SPC56ELxx/PWM-ICU/main.c deleted file mode 100644 index e6ac6281f..000000000 --- a/testhal/SPC56ELxx/PWM-ICU/main.c +++ /dev/null @@ -1,139 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void pwmpcb(PWMDriver *pwmp) { - - (void)pwmp; - palClearPad(PORT_D, PD_LED1); -} - -static void pwmc1cb(PWMDriver *pwmp) { - - (void)pwmp; - palSetPad(PORT_D, PD_LED1); -} - -static PWMConfig pwmcfg = { - 250000, /* 250kHz PWM clock frequency.*/ - 50000, /* Initial PWM period 0.2s.*/ - pwmpcb, - { - {PWM_OUTPUT_ACTIVE_HIGH, pwmc1cb}, - {PWM_OUTPUT_DISABLED, NULL} - }, - PWM_ALIGN_EDGE -}; - -icucnt_t last_width, last_period; - -static void icuwidthcb(ICUDriver *icup) { - - palSetPad(PORT_D, PD_LED2); - last_width = icuGetWidth(icup); -} - -static void icuperiodcb(ICUDriver *icup) { - - palClearPad(PORT_D, PD_LED2); - last_period = icuGetPeriod(icup); -} - -static ICUConfig icucfg = { - ICU_INPUT_ACTIVE_HIGH, - 250000, /* 250kHz ICU clock frequency.*/ - icuwidthcb, - icuperiodcb, - NULL -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - /* - * Initializes the PWM driver 1 and ICU driver 1. - * GPIOD10 is the PWM output. - * GPIOA0 is the ICU input. - * The two pins have to be externally connected together. - */ - icuStart(&ICUD1, &icucfg); - icuEnable(&ICUD1); - - /* Sets A0 alternative function.*/ - SIU.PCR[0].R = 0b0100010100000100; - - pwmStart(&PWMD1, &pwmcfg); - /* Sets D10 alternative function.*/ - SIU.PCR[58].R = 0b0100010100000100; - - chThdSleepMilliseconds(2000); - - /* - * Starts the PWM channel 0 using 75% duty cycle. - */ - pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 7500)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 50% duty cycle. - */ - pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 5000)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 25% duty cycle. - */ - pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 2500)); - chThdSleepMilliseconds(5000); - - /* - * Changes PWM period and the PWM channel 0 to 50% duty cycle. - */ - pwmChangePeriod(&PWMD1, 25000); - pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 5000)); - chThdSleepMilliseconds(5000); - - /* - * Disables channel 0 and stops the drivers. - */ - pwmDisableChannel(&PWMD1, 0); - pwmStop(&PWMD1); - icuDisable(&ICUD1); - icuStop(&ICUD1); - palClearPad(PORT_D, PD_LED3); - palClearPad(PORT_D, PD_LED4); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/SPC56ELxx/PWM-ICU/mcuconf.h b/testhal/SPC56ELxx/PWM-ICU/mcuconf.h deleted file mode 100644 index 221ad245e..000000000 --- a/testhal/SPC56ELxx/PWM-ICU/mcuconf.h +++ /dev/null @@ -1,280 +0,0 @@ -/* - SPC5 HAL - Copyright (C) 2013 STMicroelectronics - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * SPC56ELxx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 1...15 Lowest...Highest. - * DMA priorities: - * 0...15 Highest...Lowest. - */ - -#define SPC56ELxx_MCUCONF - -/* - * HAL driver system settings. - */ -#define SPC5_NO_INIT FALSE -#define SPC5_ALLOW_OVERCLOCK FALSE -#define SPC5_DISABLE_WATCHDOG TRUE -#define SPC5_FMPLL0_CLK_SRC SPC5_FMPLL_SRC_XOSC -#define SPC5_FMPLL0_IDF_VALUE 5 -#define SPC5_FMPLL0_NDIV_VALUE 60 -#define SPC5_FMPLL0_ODF SPC5_FMPLL_ODF_DIV4 -#define SPC5_FMPLL1_CLK_SRC SPC5_FMPLL_SRC_XOSC -#define SPC5_FMPLL1_IDF_VALUE 5 -#define SPC5_FMPLL1_NDIV_VALUE 60 -#define SPC5_FMPLL1_ODF SPC5_FMPLL_ODF_DIV4 -#define SPC5_SYSCLK_DIVIDER_VALUE 2 -#define SPC5_AUX0CLK_SRC SPC5_CGM_SS_FMPLL1 -#define SPC5_MCONTROL_DIVIDER_VALUE 15 -#define SPC5_SWG_DIVIDER_VALUE 2 -#define SPC5_AUX1CLK_SRC SPC5_CGM_SS_FMPLL1 -#define SPC5_FLEXRAY_DIVIDER_VALUE 2 -#define SPC5_AUX2CLK_SRC SPC5_CGM_SS_FMPLL1 -#define SPC5_FLEXCAN_DIVIDER_VALUE 2 -#define SPC5_ME_ME_BITS (SPC5_ME_ME_RUN1 | \ - SPC5_ME_ME_RUN2 | \ - SPC5_ME_ME_RUN3 | \ - SPC5_ME_ME_HALT0 | \ - SPC5_ME_ME_STOP0) -#define SPC5_ME_SAFE_MC_BITS (SPC5_ME_MC_PDO) -#define SPC5_ME_DRUN_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_FLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_FLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN1_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_FLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN2_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_FLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN3_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_FLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_HALT0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_FLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_STOP0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_FLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN_PC3_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC4_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC5_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC6_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC7_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_LP_PC4_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_ME_LP_PC5_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_ME_LP_PC6_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_ME_LP_PC7_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_CLOCK_FAILURE_HOOK() chSysHalt() - -/* - * EDMA driver settings. - */ -#define SPC5_EDMA_CR_SETTING 0 -#define SPC5_EDMA_GROUP0_PRIORITIES \ - 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 -#define SPC5_EDMA_ERROR_IRQ_PRIO 2 -#define SPC5_EDMA_ERROR_HANDLER() chSysHalt() - -/* - * SERIAL driver system settings. - */ -#define SPC5_SERIAL_USE_LINFLEX0 TRUE -#define SPC5_SERIAL_USE_LINFLEX1 TRUE -#define SPC5_SERIAL_LINFLEX0_PRIORITY 8 -#define SPC5_SERIAL_LINFLEX1_PRIORITY 8 -#define SPC5_SERIAL_LINFLEX0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SERIAL_LINFLEX0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) -#define SPC5_SERIAL_LINFLEX1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SERIAL_LINFLEX1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -/* - * PWM driver system settings. - */ -#define SPC5_PWM_USE_SMOD0 TRUE -#define SPC5_PWM_USE_SMOD1 FALSE -#define SPC5_PWM_USE_SMOD2 FALSE -#define SPC5_PWM_USE_SMOD3 FALSE -#define SPC5_PWM_SMOD0_PRIORITY 7 -#define SPC5_PWM_SMOD1_PRIORITY 7 -#define SPC5_PWM_SMOD2_PRIORITY 7 -#define SPC5_PWM_SMOD3_PRIORITY 7 -#define SPC5_PWM_FLEXPWM0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_PWM_FLEXPWM0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -#define SPC5_PWM_USE_SMOD4 FALSE -#define SPC5_PWM_USE_SMOD5 FALSE -#define SPC5_PWM_USE_SMOD6 FALSE -#define SPC5_PWM_USE_SMOD7 FALSE -#define SPC5_PWM_SMOD4_PRIORITY 7 -#define SPC5_PWM_SMOD5_PRIORITY 7 -#define SPC5_PWM_SMOD6_PRIORITY 7 -#define SPC5_PWM_SMOD7_PRIORITY 7 -#define SPC5_PWM_FLEXPWM1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_PWM_FLEXPWM1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -/* - * ICU driver system settings. - */ -#define SPC5_ICU_USE_SMOD0 TRUE -#define SPC5_ICU_USE_SMOD1 FALSE -#define SPC5_ICU_USE_SMOD2 FALSE -#define SPC5_ICU_USE_SMOD3 FALSE -#define SPC5_ICU_USE_SMOD4 FALSE -#define SPC5_ICU_USE_SMOD5 FALSE -#define SPC5_ICU_ETIMER0_PRIORITY 7 -#define SPC5_ICU_ETIMER0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_ICU_ETIMER0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -#define SPC5_ICU_USE_SMOD6 FALSE -#define SPC5_ICU_USE_SMOD7 FALSE -#define SPC5_ICU_USE_SMOD8 FALSE -#define SPC5_ICU_USE_SMOD9 FALSE -#define SPC5_ICU_USE_SMOD10 FALSE -#define SPC5_ICU_USE_SMOD11 FALSE -#define SPC5_ICU_ETIMER1_PRIORITY 7 -#define SPC5_ICU_ETIMER1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_ICU_ETIMER1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -#define SPC5_ICU_USE_SMOD12 FALSE -#define SPC5_ICU_USE_SMOD13 FALSE -#define SPC5_ICU_USE_SMOD14 FALSE -#define SPC5_ICU_USE_SMOD15 FALSE -#define SPC5_ICU_USE_SMOD16 FALSE -#define SPC5_ICU_USE_SMOD17 TRUE -#define SPC5_ICU_ETIMER2_PRIORITY 7 -#define SPC5_ICU_ETIMER2_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_ICU_ETIMER2_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -/* - * SPI driver system settings. - */ -#define SPC5_SPI_USE_DSPI0 FALSE -#define SPC5_SPI_USE_DSPI1 FALSE -#define SPC5_SPI_USE_DSPI2 FALSE -#define SPC5_SPI_DSPI0_MCR (SPC5_MCR_PCSIS0 | \ - SPC5_MCR_PCSIS1 | \ - SPC5_MCR_PCSIS2 | \ - SPC5_MCR_PCSIS3 | \ - SPC5_MCR_PCSIS4 | \ - SPC5_MCR_PCSIS5 | \ - SPC5_MCR_PCSIS6 | \ - SPC5_MCR_PCSIS7) -#define SPC5_SPI_DSPI1_MCR (SPC5_MCR_PCSIS0 | \ - SPC5_MCR_PCSIS1 | \ - SPC5_MCR_PCSIS2 | \ - SPC5_MCR_PCSIS3 | \ - SPC5_MCR_PCSIS4 | \ - SPC5_MCR_PCSIS5 | \ - SPC5_MCR_PCSIS6 | \ - SPC5_MCR_PCSIS7) -#define SPC5_SPI_DSPI2_MCR (SPC5_MCR_PCSIS0 | \ - SPC5_MCR_PCSIS1 | \ - SPC5_MCR_PCSIS2 | \ - SPC5_MCR_PCSIS3 | \ - SPC5_MCR_PCSIS4 | \ - SPC5_MCR_PCSIS5 | \ - SPC5_MCR_PCSIS6 | \ - SPC5_MCR_PCSIS7) -#define SPC5_SPI_DSPI0_DMA_IRQ_PRIO 10 -#define SPC5_SPI_DSPI1_DMA_IRQ_PRIO 10 -#define SPC5_SPI_DSPI2_DMA_IRQ_PRIO 10 -#define SPC5_SPI_DSPI0_IRQ_PRIO 10 -#define SPC5_SPI_DSPI1_IRQ_PRIO 10 -#define SPC5_SPI_DSPI2_IRQ_PRIO 10 -#define SPC5_SPI_DMA_ERROR_HOOK(spip) chSysHalt() -#define SPC5_SPI_DSPI0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SPI_DSPI0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) -#define SPC5_SPI_DSPI1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SPI_DSPI1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) -#define SPC5_SPI_DSPI2_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SPI_DSPI2_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) diff --git a/testhal/SPC56ELxx/PWM-ICU/readme.txt b/testhal/SPC56ELxx/PWM-ICU/readme.txt deleted file mode 100644 index b17dba82f..000000000 --- a/testhal/SPC56ELxx/PWM-ICU/readme.txt +++ /dev/null @@ -1,27 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - PWM/ICU drivers demo for SPC56ELxx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics SPC56ELxx microcontroller installed on -XPC56xx EVB Motherboard. - -** The Demo ** - -The application demonstrates the use of the SPC56ELxx PWM-ICU drivers. - -** Board Setup ** - -- Connect D10 and A0 together. - -** Build Procedure ** - -The demo has been tested using HighTec compiler. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. - - http://www.st.com diff --git a/testhal/SPC56ELxx/SPI/.cproject b/testhal/SPC56ELxx/SPI/.cproject deleted file mode 100644 index a4ae17c6d..000000000 --- a/testhal/SPC56ELxx/SPI/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/SPC56ELxx/SPI/.project b/testhal/SPC56ELxx/SPI/.project deleted file mode 100644 index c5157f21e..000000000 --- a/testhal/SPC56ELxx/SPI/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - SPC56ELxx-SPI - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_EVB_SPC56EL - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/SPC56ELxx/SPI/Makefile b/testhal/SPC56ELxx/SPI/Makefile deleted file mode 100644 index afc709b93..000000000 --- a/testhal/SPC56ELxx/SPI/Makefile +++ /dev/null @@ -1,168 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data. -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# If enabled, this option allows to compile the application in VLE mode. -ifeq ($(USE_VLE),) - USE_VLE = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_EVB_SPC56EL/board.mk -include $(CHIBIOS)/os/hal/platforms/SPC56ELxx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/PPC/SPC56ELxx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/SPC56EL60_LSM.ld - -# C sources here. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - $(CHIBIOS)/os/various/shell.c \ - $(CHIBIOS)/os/various/chprintf.c \ - main.c - -# C++ sources here. -CPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -#MCU = e500mc -meabi -msdata=none -mnew-mnemonics -mregnames -MCU = e200zx -meabi -msdata=none -mnew-mnemonics -mregnames - -#TRGT = powerpc-eabi- -TRGT = ppc-vle- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = -D_SPC560P50L5_ - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -include $(CHIBIOS)/os/ports/GCC/PPC/rules.mk diff --git a/testhal/SPC56ELxx/SPI/chconf.h b/testhal/SPC56ELxx/SPI/chconf.h deleted file mode 100644 index dc956ef13..000000000 --- a/testhal/SPC56ELxx/SPI/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/SPC56ELxx/SPI/halconf.h b/testhal/SPC56ELxx/SPI/halconf.h deleted file mode 100644 index fdc079aef..000000000 --- a/testhal/SPC56ELxx/SPI/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/SPC56ELxx/SPI/main.c b/testhal/SPC56ELxx/SPI/main.c deleted file mode 100644 index ef283f656..000000000 --- a/testhal/SPC56ELxx/SPI/main.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * Maximum speed SPI configuration. - */ -static const SPIConfig hs_spicfg = { - NULL, - 0, - 0, - SPC5_CTAR_CSSCK_DIV2 | SPC5_CTAR_ASC_DIV2 | SPC5_CTAR_FMSZ(8) | - SPC5_CTAR_PBR_PRE2 | SPC5_CTAR_BR_DIV2, /* CTAR0. */ - SPC5_PUSHR_CONT | SPC5_PUSHR_PCS(1) /* PUSHR. */ -}; - -/* - * Low speed SPI configuration. - */ -static const SPIConfig ls_spicfg = { - NULL, - 0, - 0, - SPC5_CTAR_CSSCK_DIV64 | SPC5_CTAR_ASC_DIV64 | SPC5_CTAR_FMSZ(8) | - SPC5_CTAR_PBR_PRE2 | SPC5_CTAR_BR_DIV256, /* CTAR0. */ - SPC5_PUSHR_CONT | SPC5_PUSHR_PCS(0) /* PUSHR. */ -}; - -/* - * SPI TX and RX buffers. - */ -static uint8_t txbuf[512]; -static uint8_t rxbuf[512]; - -/* - * SPI bus contender 1. - */ -static WORKING_AREA(spi_thread_1_wa, 256); -static msg_t spi_thread_1(void *p) { - - (void)p; - chRegSetThreadName("SPI thread 1"); - while (TRUE) { - spiAcquireBus(&SPID1); /* Acquire ownership of the bus. */ - palClearPad(PORT_D, PD_LED1); /* LED ON. */ - spiStart(&SPID1, &hs_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID1); /* Slave Select assertion. */ - spiExchange(&SPID1, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID1); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID1); /* Ownership release. */ - } - return 0; -} - -/* - * SPI bus contender 2. - */ -static WORKING_AREA(spi_thread_2_wa, 256); -static msg_t spi_thread_2(void *p) { - - (void)p; - chRegSetThreadName("SPI thread 2"); - while (TRUE) { - spiAcquireBus(&SPID1); /* Acquire ownership of the bus. */ - palSetPad(PORT_D, PD_LED1); /* LED OFF. */ - spiStart(&SPID1, &ls_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID1); /* Slave Select assertion. */ - spiExchange(&SPID1, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID1); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID1); /* Ownership release. */ - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Prepare transmit pattern. - */ - for (i = 0; i < sizeof(txbuf); i++) - txbuf[i] = (uint8_t)i; - - /* Starting driver for test, DSPI_0 I/O pins setup.*/ - spiStart(&SPID1, &ls_spicfg); - SIU.PCR[37].R = PAL_MODE_OUTPUT_ALTERNATE(1); /* SCK */ - SIU.PCR[38].R = PAL_MODE_OUTPUT_ALTERNATE(1); /* SOUT */ - SIU.PCR[36].R = PAL_MODE_OUTPUT_ALTERNATE(1); /* CS[0] */ - SIU.PCR[54].R = PAL_MODE_OUTPUT_ALTERNATE(1); /* CS[2] */ - - /* Testing sending and receiving at the same time.*/ - spiExchange(&SPID1, 4, txbuf, rxbuf); - spiExchange(&SPID1, 32, txbuf, rxbuf); - spiExchange(&SPID1, 512, txbuf, rxbuf); - - /* Testing clock pulses without data buffering.*/ - spiIgnore(&SPID1, 4); - spiIgnore(&SPID1, 32); - - /* Testing sending data ignoring incoming data.*/ - spiSend(&SPID1, 4, txbuf); - spiSend(&SPID1, 32, txbuf); - - /* Testing receiving data while sending idle bits (high level).*/ - spiReceive(&SPID1, 4, rxbuf); - spiReceive(&SPID1, 32, rxbuf); - - /* Testing stop procedure.*/ - spiStop(&SPID1); - - /* - * Starting the transmitter and receiver threads. - */ - chThdCreateStatic(spi_thread_1_wa, sizeof(spi_thread_1_wa), - NORMALPRIO + 1, spi_thread_1, NULL); - chThdCreateStatic(spi_thread_2_wa, sizeof(spi_thread_2_wa), - NORMALPRIO + 1, spi_thread_2, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - palTogglePad(PORT_D, PD_LED2); - } - return 0; -} diff --git a/testhal/SPC56ELxx/SPI/mcuconf.h b/testhal/SPC56ELxx/SPI/mcuconf.h deleted file mode 100644 index 322a9be56..000000000 --- a/testhal/SPC56ELxx/SPI/mcuconf.h +++ /dev/null @@ -1,280 +0,0 @@ -/* - SPC5 HAL - Copyright (C) 2013 STMicroelectronics - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * SPC56ELxx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 1...15 Lowest...Highest. - * DMA priorities: - * 0...15 Highest...Lowest. - */ - -#define SPC56ELxx_MCUCONF - -/* - * HAL driver system settings. - */ -#define SPC5_NO_INIT FALSE -#define SPC5_ALLOW_OVERCLOCK FALSE -#define SPC5_DISABLE_WATCHDOG TRUE -#define SPC5_FMPLL0_CLK_SRC SPC5_FMPLL_SRC_XOSC -#define SPC5_FMPLL0_IDF_VALUE 5 -#define SPC5_FMPLL0_NDIV_VALUE 60 -#define SPC5_FMPLL0_ODF SPC5_FMPLL_ODF_DIV4 -#define SPC5_FMPLL1_CLK_SRC SPC5_FMPLL_SRC_XOSC -#define SPC5_FMPLL1_IDF_VALUE 5 -#define SPC5_FMPLL1_NDIV_VALUE 60 -#define SPC5_FMPLL1_ODF SPC5_FMPLL_ODF_DIV4 -#define SPC5_SYSCLK_DIVIDER_VALUE 2 -#define SPC5_AUX0CLK_SRC SPC5_CGM_SS_FMPLL1 -#define SPC5_MCONTROL_DIVIDER_VALUE 15 -#define SPC5_SWG_DIVIDER_VALUE 2 -#define SPC5_AUX1CLK_SRC SPC5_CGM_SS_FMPLL1 -#define SPC5_FLEXRAY_DIVIDER_VALUE 2 -#define SPC5_AUX2CLK_SRC SPC5_CGM_SS_FMPLL1 -#define SPC5_FLEXCAN_DIVIDER_VALUE 2 -#define SPC5_ME_ME_BITS (SPC5_ME_ME_RUN1 | \ - SPC5_ME_ME_RUN2 | \ - SPC5_ME_ME_RUN3 | \ - SPC5_ME_ME_HALT0 | \ - SPC5_ME_ME_STOP0) -#define SPC5_ME_SAFE_MC_BITS (SPC5_ME_MC_PDO) -#define SPC5_ME_DRUN_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_FLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_FLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN1_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_FLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN2_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_FLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN3_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_FLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_HALT0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_FLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_STOP0_MC_BITS (SPC5_ME_MC_SYSCLK_FMPLL0 | \ - SPC5_ME_MC_IRCON | \ - SPC5_ME_MC_XOSC0ON | \ - SPC5_ME_MC_PLL0ON | \ - SPC5_ME_MC_PLL1ON | \ - SPC5_ME_MC_FLAON_NORMAL | \ - SPC5_ME_MC_MVRON) -#define SPC5_ME_RUN_PC3_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC4_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC5_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC6_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_RUN_PC7_BITS (SPC5_ME_RUN_PC_RUN0 | \ - SPC5_ME_RUN_PC_RUN1 | \ - SPC5_ME_RUN_PC_RUN2 | \ - SPC5_ME_RUN_PC_RUN3) -#define SPC5_ME_LP_PC4_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_ME_LP_PC5_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_ME_LP_PC6_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_ME_LP_PC7_BITS (SPC5_ME_LP_PC_HALT0 | \ - SPC5_ME_LP_PC_STOP0) -#define SPC5_CLOCK_FAILURE_HOOK() chSysHalt() - -/* - * EDMA driver settings. - */ -#define SPC5_EDMA_CR_SETTING 0 -#define SPC5_EDMA_GROUP0_PRIORITIES \ - 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 -#define SPC5_EDMA_ERROR_IRQ_PRIO 2 -#define SPC5_EDMA_ERROR_HANDLER() chSysHalt() - -/* - * SERIAL driver system settings. - */ -#define SPC5_SERIAL_USE_LINFLEX0 TRUE -#define SPC5_SERIAL_USE_LINFLEX1 TRUE -#define SPC5_SERIAL_LINFLEX0_PRIORITY 8 -#define SPC5_SERIAL_LINFLEX1_PRIORITY 8 -#define SPC5_SERIAL_LINFLEX0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SERIAL_LINFLEX0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) -#define SPC5_SERIAL_LINFLEX1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SERIAL_LINFLEX1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -/* - * PWM driver system settings. - */ -#define SPC5_PWM_USE_SMOD0 FALSE -#define SPC5_PWM_USE_SMOD1 FALSE -#define SPC5_PWM_USE_SMOD2 FALSE -#define SPC5_PWM_USE_SMOD3 FALSE -#define SPC5_PWM_SMOD0_PRIORITY 7 -#define SPC5_PWM_SMOD1_PRIORITY 7 -#define SPC5_PWM_SMOD2_PRIORITY 7 -#define SPC5_PWM_SMOD3_PRIORITY 7 -#define SPC5_PWM_FLEXPWM0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_PWM_FLEXPWM0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -#define SPC5_PWM_USE_SMOD4 FALSE -#define SPC5_PWM_USE_SMOD5 FALSE -#define SPC5_PWM_USE_SMOD6 FALSE -#define SPC5_PWM_USE_SMOD7 FALSE -#define SPC5_PWM_SMOD4_PRIORITY 7 -#define SPC5_PWM_SMOD5_PRIORITY 7 -#define SPC5_PWM_SMOD6_PRIORITY 7 -#define SPC5_PWM_SMOD7_PRIORITY 7 -#define SPC5_PWM_FLEXPWM1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_PWM_FLEXPWM1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -/* - * ICU driver system settings. - */ -#define SPC5_ICU_USE_SMOD0 FALSE -#define SPC5_ICU_USE_SMOD1 FALSE -#define SPC5_ICU_USE_SMOD2 FALSE -#define SPC5_ICU_USE_SMOD3 FALSE -#define SPC5_ICU_USE_SMOD4 FALSE -#define SPC5_ICU_USE_SMOD5 FALSE -#define SPC5_ICU_ETIMER0_PRIORITY 7 -#define SPC5_ICU_ETIMER0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_ICU_ETIMER0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -#define SPC5_ICU_USE_SMOD6 FALSE -#define SPC5_ICU_USE_SMOD7 FALSE -#define SPC5_ICU_USE_SMOD8 FALSE -#define SPC5_ICU_USE_SMOD9 FALSE -#define SPC5_ICU_USE_SMOD10 FALSE -#define SPC5_ICU_USE_SMOD11 FALSE -#define SPC5_ICU_ETIMER1_PRIORITY 7 -#define SPC5_ICU_ETIMER1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_ICU_ETIMER1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -#define SPC5_ICU_USE_SMOD12 FALSE -#define SPC5_ICU_USE_SMOD13 FALSE -#define SPC5_ICU_USE_SMOD14 FALSE -#define SPC5_ICU_USE_SMOD15 FALSE -#define SPC5_ICU_USE_SMOD16 FALSE -#define SPC5_ICU_USE_SMOD17 TRUE -#define SPC5_ICU_ETIMER2_PRIORITY 7 -#define SPC5_ICU_ETIMER2_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_ICU_ETIMER2_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) - -/* - * SPI driver system settings. - */ -#define SPC5_SPI_USE_DSPI0 TRUE -#define SPC5_SPI_USE_DSPI1 TRUE -#define SPC5_SPI_USE_DSPI2 TRUE -#define SPC5_SPI_DSPI0_MCR (SPC5_MCR_PCSIS0 | \ - SPC5_MCR_PCSIS1 | \ - SPC5_MCR_PCSIS2 | \ - SPC5_MCR_PCSIS3 | \ - SPC5_MCR_PCSIS4 | \ - SPC5_MCR_PCSIS5 | \ - SPC5_MCR_PCSIS6 | \ - SPC5_MCR_PCSIS7) -#define SPC5_SPI_DSPI1_MCR (SPC5_MCR_PCSIS0 | \ - SPC5_MCR_PCSIS1 | \ - SPC5_MCR_PCSIS2 | \ - SPC5_MCR_PCSIS3 | \ - SPC5_MCR_PCSIS4 | \ - SPC5_MCR_PCSIS5 | \ - SPC5_MCR_PCSIS6 | \ - SPC5_MCR_PCSIS7) -#define SPC5_SPI_DSPI2_MCR (SPC5_MCR_PCSIS0 | \ - SPC5_MCR_PCSIS1 | \ - SPC5_MCR_PCSIS2 | \ - SPC5_MCR_PCSIS3 | \ - SPC5_MCR_PCSIS4 | \ - SPC5_MCR_PCSIS5 | \ - SPC5_MCR_PCSIS6 | \ - SPC5_MCR_PCSIS7) -#define SPC5_SPI_DSPI0_DMA_IRQ_PRIO 10 -#define SPC5_SPI_DSPI1_DMA_IRQ_PRIO 10 -#define SPC5_SPI_DSPI2_DMA_IRQ_PRIO 10 -#define SPC5_SPI_DSPI0_IRQ_PRIO 10 -#define SPC5_SPI_DSPI1_IRQ_PRIO 10 -#define SPC5_SPI_DSPI2_IRQ_PRIO 10 -#define SPC5_SPI_DMA_ERROR_HOOK(spip) chSysHalt() -#define SPC5_SPI_DSPI0_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SPI_DSPI0_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) -#define SPC5_SPI_DSPI1_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SPI_DSPI1_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) -#define SPC5_SPI_DSPI2_START_PCTL (SPC5_ME_PCTL_RUN(1) | \ - SPC5_ME_PCTL_LP(2)) -#define SPC5_SPI_DSPI2_STOP_PCTL (SPC5_ME_PCTL_RUN(0) | \ - SPC5_ME_PCTL_LP(0)) diff --git a/testhal/SPC56ELxx/SPI/readme.txt b/testhal/SPC56ELxx/SPI/readme.txt deleted file mode 100644 index 96da3df24..000000000 --- a/testhal/SPC56ELxx/SPI/readme.txt +++ /dev/null @@ -1,25 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - SPI driver demo for SPC56ELxx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics SPC56ELxx microcontroller installed on -XPC56xx EVB Motherboard. - -** The Demo ** - -The application demonstrates the use of the SPC56ELxx SPI driver. - -** Board Setup ** - -** Build Procedure ** - -The demo has been tested using HighTec compiler. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. - - http://www.st.com diff --git a/testhal/STM32F0xx/ADC/.cproject b/testhal/STM32F0xx/ADC/.cproject deleted file mode 100644 index a3fb831a8..000000000 --- a/testhal/STM32F0xx/ADC/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F0xx/ADC/.project b/testhal/STM32F0xx/ADC/.project deleted file mode 100644 index 4aa2b6463..000000000 --- a/testhal/STM32F0xx/ADC/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F0xx-ADC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32F0_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F0xx/ADC/Makefile b/testhal/STM32F0xx/ADC/Makefile deleted file mode 100644 index 0b2d556fb..000000000 --- a/testhal/STM32F0xx/ADC/Makefile +++ /dev/null @@ -1,207 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32F0_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F0xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F0xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F051x8.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F0xx/ADC/chconf.h b/testhal/STM32F0xx/ADC/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F0xx/ADC/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F0xx/ADC/halconf.h b/testhal/STM32F0xx/ADC/halconf.h deleted file mode 100644 index a719ec40a..000000000 --- a/testhal/STM32F0xx/ADC/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC TRUE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F0xx/ADC/main.c b/testhal/STM32F0xx/ADC/main.c deleted file mode 100644 index 90b05df1a..000000000 --- a/testhal/STM32F0xx/ADC/main.c +++ /dev/null @@ -1,152 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#define ADC_GRP1_NUM_CHANNELS 1 -#define ADC_GRP1_BUF_DEPTH 8 - -#define ADC_GRP2_NUM_CHANNELS 4 -#define ADC_GRP2_BUF_DEPTH 16 - -static adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH]; -static adcsample_t samples2[ADC_GRP2_NUM_CHANNELS * ADC_GRP2_BUF_DEPTH]; - -/* - * ADC streaming callback. - */ -size_t nx = 0, ny = 0; -static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) { - - (void)adcp; - if (samples2 == buffer) { - nx += n; - } - else { - ny += n; - } -} - -static void adcerrorcallback(ADCDriver *adcp, adcerror_t err) { - - (void)adcp; - (void)err; -} - -/* - * ADC conversion group. - * Mode: Linear buffer, 8 samples of 1 channel, SW triggered. - * Channels: IN10. - */ -static const ADCConversionGroup adcgrpcfg1 = { - FALSE, - ADC_GRP1_NUM_CHANNELS, - NULL, - adcerrorcallback, - ADC_CFGR1_RES_12BIT, /* CFGRR1 */ - ADC_TR(0, 0), /* TR */ - ADC_SMPR_SMP_1P5, /* SMPR */ - ADC_CHSELR_CHSEL10 /* CHSELR */ -}; - -/* - * ADC conversion group. - * Mode: Continuous, 16 samples of 8 channels, SW triggered. - * Channels: IN10, IN11, Sensor, VRef. - */ -static const ADCConversionGroup adcgrpcfg2 = { - TRUE, - ADC_GRP2_NUM_CHANNELS, - adccallback, - adcerrorcallback, - ADC_CFGR1_RES_12BIT, /* CFGRR1 */ - ADC_TR(0, 0), /* TR */ - ADC_SMPR_SMP_28P5, /* SMPR */ - ADC_CHSELR_CHSEL10 | ADC_CHSELR_CHSEL11 | - ADC_CHSELR_CHSEL16 | ADC_CHSELR_CHSEL17 /* CHSELR */ -}; - -/* - * Red LEDs blinker thread, times are in milliseconds. - */ -static WORKING_AREA(waThread1, 128); -static msg_t Thread1(void *arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - palSetPad(GPIOC, GPIOC_LED4); - chThdSleepMilliseconds(500); - palClearPad(GPIOC, GPIOC_LED4); - chThdSleepMilliseconds(500); - } -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Setting up analog inputs used by the demo. - */ - palSetGroupMode(GPIOC, PAL_PORT_BIT(0) | PAL_PORT_BIT(1), - 0, PAL_MODE_INPUT_ANALOG); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Activates the ADC1 driver and the temperature sensor. - */ - adcStart(&ADCD1, NULL); - adcSTM32SetCCR(ADC_CCR_VBATEN | ADC_CCR_TSEN | ADC_CCR_VREFEN); - - /* - * Linear conversion. - */ - adcConvert(&ADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH); - chThdSleepMilliseconds(1000); - - /* - * Starts an ADC continuous conversion. - */ - adcStartConversion(&ADCD1, &adcgrpcfg2, samples2, ADC_GRP2_BUF_DEPTH); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - if (palReadPad(GPIOA, GPIOA_BUTTON)) { - adcStopConversion(&ADCD1); - adcSTM32SetCCR(0); - } - chThdSleepMilliseconds(500); - } -} diff --git a/testhal/STM32F0xx/ADC/mcuconf.h b/testhal/STM32F0xx/ADC/mcuconf.h deleted file mode 100644 index cca199b9c..000000000 --- a/testhal/STM32F0xx/ADC/mcuconf.h +++ /dev/null @@ -1,147 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F0xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 TRUE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() diff --git a/testhal/STM32F0xx/ADC/readme.txt b/testhal/STM32F0xx/ADC/readme.txt deleted file mode 100644 index 704ffb1a6..000000000 --- a/testhal/STM32F0xx/ADC/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - ADC driver demo for STM32F0xx. ** -***************************************************************************** - -** TARGET ** - -The demo will on an STMicroelectronics STM32F0-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F0xx ADC driver. - -** Board Setup ** - -- Remove the LCD module. -- Connect PC0 to 3.3V and PC1 to GND for analog measurements. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F0xx/EXT/.cproject b/testhal/STM32F0xx/EXT/.cproject deleted file mode 100644 index 818c355d4..000000000 --- a/testhal/STM32F0xx/EXT/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F0xx/EXT/.project b/testhal/STM32F0xx/EXT/.project deleted file mode 100644 index 301651983..000000000 --- a/testhal/STM32F0xx/EXT/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F0xx-EXT - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32F0_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F0xx/EXT/Makefile b/testhal/STM32F0xx/EXT/Makefile deleted file mode 100644 index 0b2d556fb..000000000 --- a/testhal/STM32F0xx/EXT/Makefile +++ /dev/null @@ -1,207 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32F0_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F0xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F0xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F051x8.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F0xx/EXT/chconf.h b/testhal/STM32F0xx/EXT/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F0xx/EXT/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F0xx/EXT/halconf.h b/testhal/STM32F0xx/EXT/halconf.h deleted file mode 100644 index 1069ba5c1..000000000 --- a/testhal/STM32F0xx/EXT/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F0xx/EXT/main.c b/testhal/STM32F0xx/EXT/main.c deleted file mode 100644 index cdba37eff..000000000 --- a/testhal/STM32F0xx/EXT/main.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void led4off(void *arg) { - - (void)arg; - palClearPad(GPIOC, GPIOC_LED4); -} - -/* Triggered when the button is pressed or released. The LED4 is set to ON.*/ -static void extcb1(EXTDriver *extp, expchannel_t channel) { - static VirtualTimer vt4; - - (void)extp; - (void)channel; - palSetPad(GPIOC, GPIOC_LED4); - chSysLockFromIsr(); - if (chVTIsArmedI(&vt4)) - chVTResetI(&vt4); - /* LED4 set to OFF after 200mS.*/ - chVTSetI(&vt4, MS2ST(200), led4off, NULL); - chSysUnlockFromIsr(); -} - -static const EXTConfig extcfg = { - { - {EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOA, extcb1}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL} - } -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the EXT driver 1. - */ - extStart(&EXTD1, &extcfg); - - /* - * Normal main() thread activity, in this demo it enables and disables the - * button EXT channel using 5 seconds intervals. - */ - while (TRUE) { - chThdSleepMilliseconds(5000); - extChannelDisable(&EXTD1, 0); - chThdSleepMilliseconds(5000); - extChannelEnable(&EXTD1, 0); - } -} diff --git a/testhal/STM32F0xx/EXT/mcuconf.h b/testhal/STM32F0xx/EXT/mcuconf.h deleted file mode 100644 index ea61b3dec..000000000 --- a/testhal/STM32F0xx/EXT/mcuconf.h +++ /dev/null @@ -1,147 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F0xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() diff --git a/testhal/STM32F0xx/EXT/readme.txt b/testhal/STM32F0xx/EXT/readme.txt deleted file mode 100644 index 542fc577e..000000000 --- a/testhal/STM32F0xx/EXT/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - EXT driver demo for STM32F0xx. ** -***************************************************************************** - -** TARGET ** - -The demo will on an STMicroelectronics STM32F0-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F0xx EXT driver. - -** Board Setup ** - -None required. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F0xx/IRQ_STORM/.cproject b/testhal/STM32F0xx/IRQ_STORM/.cproject deleted file mode 100644 index aea7bcbae..000000000 --- a/testhal/STM32F0xx/IRQ_STORM/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F0xx/IRQ_STORM/.project b/testhal/STM32F0xx/IRQ_STORM/.project deleted file mode 100644 index a3027689a..000000000 --- a/testhal/STM32F0xx/IRQ_STORM/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F0xx-IRQ_STORM - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32F0_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F0xx/IRQ_STORM/Makefile b/testhal/STM32F0xx/IRQ_STORM/Makefile deleted file mode 100644 index 0b2d556fb..000000000 --- a/testhal/STM32F0xx/IRQ_STORM/Makefile +++ /dev/null @@ -1,207 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32F0_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F0xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F0xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F051x8.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F0xx/IRQ_STORM/chconf.h b/testhal/STM32F0xx/IRQ_STORM/chconf.h deleted file mode 100644 index f943ea80c..000000000 --- a/testhal/STM32F0xx/IRQ_STORM/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE FALSE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F0xx/IRQ_STORM/halconf.h b/testhal/STM32F0xx/IRQ_STORM/halconf.h deleted file mode 100644 index d91a792b4..000000000 --- a/testhal/STM32F0xx/IRQ_STORM/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F0xx/IRQ_STORM/main.c b/testhal/STM32F0xx/IRQ_STORM/main.c deleted file mode 100644 index fd74a54c1..000000000 --- a/testhal/STM32F0xx/IRQ_STORM/main.c +++ /dev/null @@ -1,328 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include - -#include "ch.h" -#include "hal.h" - -/*===========================================================================*/ -/* Configurable settings. */ -/*===========================================================================*/ - -#ifndef RANDOMIZE -#define RANDOMIZE FALSE -#endif - -#ifndef ITERATIONS -#define ITERATIONS 100 -#endif - -#ifndef NUM_THREADS -#define NUM_THREADS 4 -#endif - -#ifndef MAILBOX_SIZE -#define MAILBOX_SIZE 4 -#endif - -/*===========================================================================*/ -/* Test related code. */ -/*===========================================================================*/ - -#define MSG_SEND_LEFT 0 -#define MSG_SEND_RIGHT 1 - -static bool_t saturated; - -/* - * Mailboxes and buffers. - */ -static Mailbox mb[NUM_THREADS]; -static msg_t b[NUM_THREADS][MAILBOX_SIZE]; - -/* - * Test worker threads. - */ -static WORKING_AREA(waWorkerThread[NUM_THREADS], 128); -static msg_t WorkerThread(void *arg) { - static volatile unsigned x = 0; - static unsigned cnt = 0; - unsigned me = (unsigned)arg; - unsigned target; - unsigned r; - msg_t msg; - - chRegSetThreadName("worker"); - - /* Work loop.*/ - while (TRUE) { - /* Waiting for a message.*/ - chMBFetch(&mb[me], &msg, TIME_INFINITE); - -#if RANDOMIZE - /* Pseudo-random delay.*/ - { - chSysLock(); - r = rand() & 15; - chSysUnlock(); - while (r--) - x++; - } -#else - /* Fixed delay.*/ - { - r = me >> 4; - while (r--) - x++; - } -#endif - - /* Deciding in which direction to re-send the message.*/ - if (msg == MSG_SEND_LEFT) - target = me - 1; - else - target = me + 1; - - if (target < NUM_THREADS) { - /* If this thread is not at the end of a chain re-sending the message, - note this check works because the variable target is unsigned.*/ - msg = chMBPost(&mb[target], msg, TIME_IMMEDIATE); - if (msg != RDY_OK) - saturated = TRUE; - } - else { - /* Provides a visual feedback about the system.*/ - if (++cnt >= 500) { - cnt = 0; - palTogglePad(GPIOC, GPIOC_LED4); - } - } - } -} - -/* - * GPT2 callback. - */ -static void gpt2cb(GPTDriver *gptp) { - msg_t msg; - - (void)gptp; - chSysLockFromIsr(); - msg = chMBPostI(&mb[0], MSG_SEND_RIGHT); - if (msg != RDY_OK) - saturated = TRUE; - chSysUnlockFromIsr(); -} - -/* - * GPT3 callback. - */ -static void gpt3cb(GPTDriver *gptp) { - msg_t msg; - - (void)gptp; - chSysLockFromIsr(); - msg = chMBPostI(&mb[NUM_THREADS - 1], MSG_SEND_LEFT); - if (msg != RDY_OK) - saturated = TRUE; - chSysUnlockFromIsr(); -} - -/* - * GPT2 configuration. - */ -static const GPTConfig gpt2cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt2cb /* Timer callback.*/ -}; - -/* - * GPT3 configuration. - */ -static const GPTConfig gpt3cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt3cb /* Timer callback.*/ -}; - - -/*===========================================================================*/ -/* Generic demo code. */ -/*===========================================================================*/ - -static void print(char *p) { - - while (*p) { - chSequentialStreamPut(&SD1, *p++); - } -} - -static void println(char *p) { - - while (*p) { - chSequentialStreamPut(&SD1, *p++); - } - chSequentialStreamWrite(&SD1, (uint8_t *)"\r\n", 2); -} - -static void printn(uint32_t n) { - char buf[16], *p; - - if (!n) - chSequentialStreamPut(&SD1, '0'); - else { - p = buf; - while (n) - *p++ = (n % 10) + '0', n /= 10; - while (p > buf) - chSequentialStreamPut(&SD1, *--p); - } -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - gptcnt_t interval, threshold, worst; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Prepares the Serial driver 1 and GPT drivers 2 and 3. - */ - sdStart(&SD1, NULL); - palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(1)); /* USART1 TX. */ - palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(1)); /* USART1 RX. */ - gptStart(&GPTD2, &gpt2cfg); - gptStart(&GPTD3, &gpt3cfg); - - /* - * Initializes the mailboxes and creates the worker threads. - */ - for (i = 0; i < NUM_THREADS; i++) { - chMBInit(&mb[i], b[i], MAILBOX_SIZE); - chThdCreateStatic(waWorkerThread[i], sizeof waWorkerThread[i], - NORMALPRIO - 20, WorkerThread, (void *)i); - } - - /* - * Test procedure. - */ - println(""); - println("*** ChibiOS/RT IRQ-STORM long duration test"); - println("***"); - print("*** Kernel: "); - println(CH_KERNEL_VERSION); - print("*** Compiled: "); - println(__DATE__ " - " __TIME__); -#ifdef CH_COMPILER_NAME - print("*** Compiler: "); - println(CH_COMPILER_NAME); -#endif - print("*** Architecture: "); - println(CH_ARCHITECTURE_NAME); -#ifdef CH_CORE_VARIANT_NAME - print("*** Core Variant: "); - println(CH_CORE_VARIANT_NAME); -#endif -#ifdef CH_PORT_INFO - print("*** Port Info: "); - println(CH_PORT_INFO); -#endif -#ifdef PLATFORM_NAME - print("*** Platform: "); - println(PLATFORM_NAME); -#endif -#ifdef BOARD_NAME - print("*** Test Board: "); - println(BOARD_NAME); -#endif - println("***"); - print("*** System Clock: "); - printn(STM32_SYSCLK); - println(""); - print("*** Iterations: "); - printn(ITERATIONS); - println(""); - print("*** Randomize: "); - printn(RANDOMIZE); - println(""); - print("*** Threads: "); - printn(NUM_THREADS); - println(""); - print("*** Mailbox size: "); - printn(MAILBOX_SIZE); - println(""); - - println(""); - worst = 0; - for (i = 1; i <= ITERATIONS; i++){ - print("Iteration "); - printn(i); - println(""); - saturated = FALSE; - threshold = 0; - for (interval = 2000; interval >= 20; interval -= interval / 10) { - gptStartContinuous(&GPTD2, interval - 1); /* Slightly out of phase.*/ - gptStartContinuous(&GPTD3, interval + 1); /* Slightly out of phase.*/ - chThdSleepMilliseconds(1000); - gptStopTimer(&GPTD2); - gptStopTimer(&GPTD3); - if (!saturated) - print("."); - else { - print("#"); - if (threshold == 0) - threshold = interval; - } - } - /* Gives the worker threads a chance to empty the mailboxes before next - cycle.*/ - chThdSleepMilliseconds(20); - println(""); - print("Saturated at "); - printn(threshold); - println(" uS"); - println(""); - if (threshold > worst) - worst = threshold; - } - gptStopTimer(&GPTD2); - gptStopTimer(&GPTD3); - - print("Worst case at "); - printn(worst); - println(" uS"); - println(""); - println("Test Complete"); - - /* - * Normal main() thread activity, nothing in this test. - */ - while (TRUE) { - chThdSleepMilliseconds(5000); - } - return 0; -} diff --git a/testhal/STM32F0xx/IRQ_STORM/mcuconf.h b/testhal/STM32F0xx/IRQ_STORM/mcuconf.h deleted file mode 100644 index 1a719e0ce..000000000 --- a/testhal/STM32F0xx/IRQ_STORM/mcuconf.h +++ /dev/null @@ -1,147 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F0xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 TRUE -#define STM32_GPT_USE_TIM3 TRUE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 TRUE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() diff --git a/testhal/STM32F0xx/IRQ_STORM/readme.txt b/testhal/STM32F0xx/IRQ_STORM/readme.txt deleted file mode 100644 index e56547a46..000000000 --- a/testhal/STM32F0xx/IRQ_STORM/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - IRQ_STORM stress test demo for STM32F0xx. ** -***************************************************************************** - -** TARGET ** - -The demo will on an STMicroelectronics STM32F0-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F0xx GPT, PAL and Serial -drivers in order to implement a system stress demo. - -** Board Setup ** - -None. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F0xx/PWM-ICU/.cproject b/testhal/STM32F0xx/PWM-ICU/.cproject deleted file mode 100644 index b8b1e0f2b..000000000 --- a/testhal/STM32F0xx/PWM-ICU/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F0xx/PWM-ICU/.project b/testhal/STM32F0xx/PWM-ICU/.project deleted file mode 100644 index 60ef1bb65..000000000 --- a/testhal/STM32F0xx/PWM-ICU/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F0xx-PWM-ICU - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32F0_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F0xx/PWM-ICU/Makefile b/testhal/STM32F0xx/PWM-ICU/Makefile deleted file mode 100644 index 0b2d556fb..000000000 --- a/testhal/STM32F0xx/PWM-ICU/Makefile +++ /dev/null @@ -1,207 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32F0_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F0xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F0xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F051x8.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F0xx/PWM-ICU/chconf.h b/testhal/STM32F0xx/PWM-ICU/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F0xx/PWM-ICU/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F0xx/PWM-ICU/halconf.h b/testhal/STM32F0xx/PWM-ICU/halconf.h deleted file mode 100644 index 501792854..000000000 --- a/testhal/STM32F0xx/PWM-ICU/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU TRUE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F0xx/PWM-ICU/main.c b/testhal/STM32F0xx/PWM-ICU/main.c deleted file mode 100644 index de6191c01..000000000 --- a/testhal/STM32F0xx/PWM-ICU/main.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void pwmpcb(PWMDriver *pwmp) { - - (void)pwmp; - palClearPad(GPIOC, GPIOC_LED4); -} - -static void pwmc1cb(PWMDriver *pwmp) { - - (void)pwmp; - palSetPad(GPIOC, GPIOC_LED4); -} - -static PWMConfig pwmcfg = { - 10000, /* 10kHz PWM clock frequency. */ - 10000, /* Initial PWM period 1S. */ - pwmpcb, - { - {PWM_OUTPUT_ACTIVE_HIGH, pwmc1cb}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL} - }, - 0, -}; - -icucnt_t last_width, last_period; - -static void icuwidthcb(ICUDriver *icup) { - - palSetPad(GPIOC, GPIOC_LED3); - last_width = icuGetWidth(icup); -} - -static void icuperiodcb(ICUDriver *icup) { - - palClearPad(GPIOC, GPIOC_LED3); - last_period = icuGetPeriod(icup); -} - -static void icuoverflowcb(ICUDriver *icup) { - - (void)icup; -} - -static ICUConfig icucfg = { - ICU_INPUT_ACTIVE_HIGH, - 10000, /* 10kHz ICU clock frequency. */ - icuwidthcb, - icuperiodcb, - icuoverflowcb, - ICU_CHANNEL_1 -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes the PWM driver 2 and ICU driver 3. - * GPIOA6 is the ICU input (CH1). - * GPIOA15 is the PWM output (CH1). - * The two pins have to be externally connected together. - */ - pwmStart(&PWMD2, &pwmcfg); - palSetPadMode(GPIOA, 15, PAL_MODE_ALTERNATE(2)); - icuStart(&ICUD3, &icucfg); - palSetPadMode(GPIOA, 6, PAL_MODE_ALTERNATE(1)); - icuEnable(&ICUD3); - chThdSleepMilliseconds(2000); - - /* - * Starts the PWM channel 0 using 75% duty cycle. - */ - pwmEnableChannel(&PWMD2, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD2, 7500)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 50% duty cycle. - */ - pwmEnableChannel(&PWMD2, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD2, 5000)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 25% duty cycle. - */ - pwmEnableChannel(&PWMD2, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD2, 2500)); - chThdSleepMilliseconds(5000); - - /* - * Changes PWM period to half second the duty cycle becomes 50% - * implicitly. - */ - pwmChangePeriod(&PWMD2, 5000); - chThdSleepMilliseconds(5000); - - /* - * Disables channel 0 and stops the drivers. - */ - pwmDisableChannel(&PWMD2, 0); - pwmStop(&PWMD2); - icuDisable(&ICUD3); - icuStop(&ICUD3); - palClearPad(GPIOC, GPIOC_LED3); - palClearPad(GPIOC, GPIOC_LED4); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F0xx/PWM-ICU/mcuconf.h b/testhal/STM32F0xx/PWM-ICU/mcuconf.h deleted file mode 100644 index 8e7779960..000000000 --- a/testhal/STM32F0xx/PWM-ICU/mcuconf.h +++ /dev/null @@ -1,147 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F0xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 TRUE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 TRUE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() diff --git a/testhal/STM32F0xx/PWM-ICU/readme.txt b/testhal/STM32F0xx/PWM-ICU/readme.txt deleted file mode 100644 index eccb291d3..000000000 --- a/testhal/STM32F0xx/PWM-ICU/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - PWM-ICU drivers demo for STM32F0xx. ** -***************************************************************************** - -** TARGET ** - -The demo will on an STMicroelectronics STM32F0-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F0xx PWM-ICU drivers. - -** Board Setup ** - -- Connect PA15 and PC6 together. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F0xx/SPI/.cproject b/testhal/STM32F0xx/SPI/.cproject deleted file mode 100644 index d5cace391..000000000 --- a/testhal/STM32F0xx/SPI/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F0xx/SPI/.project b/testhal/STM32F0xx/SPI/.project deleted file mode 100644 index be544ce50..000000000 --- a/testhal/STM32F0xx/SPI/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F0xx-SPI - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32F0_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F0xx/SPI/Makefile b/testhal/STM32F0xx/SPI/Makefile deleted file mode 100644 index 0b2d556fb..000000000 --- a/testhal/STM32F0xx/SPI/Makefile +++ /dev/null @@ -1,207 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32F0_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F0xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F0xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F051x8.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F0xx/SPI/chconf.h b/testhal/STM32F0xx/SPI/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F0xx/SPI/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F0xx/SPI/halconf.h b/testhal/STM32F0xx/SPI/halconf.h deleted file mode 100644 index fdc079aef..000000000 --- a/testhal/STM32F0xx/SPI/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F0xx/SPI/main.c b/testhal/STM32F0xx/SPI/main.c deleted file mode 100644 index 0f6313022..000000000 --- a/testhal/STM32F0xx/SPI/main.c +++ /dev/null @@ -1,162 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * Maximum speed SPI configuration (18MHz, CPHA=0, CPOL=0, MSb first). - */ -static const SPIConfig hs_spicfg = { - NULL, - GPIOB, - 12, - 0, - SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0 -}; - -/* - * Low speed SPI configuration (140.625kHz, CPHA=0, CPOL=0, MSb first). - */ -static const SPIConfig ls_spicfg = { - NULL, - GPIOB, - 12, - SPI_CR1_BR_2 | SPI_CR1_BR_1, - SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0 -}; - -/* - * SPI TX and RX buffers. - */ -static uint8_t txbuf[512]; -static uint8_t rxbuf[512]; - -/* - * SPI bus contender 1. - */ -static WORKING_AREA(spi_thread_1_wa, 256); -static msg_t spi_thread_1(void *p) { - - (void)p; - chRegSetThreadName("SPI thread 1"); - while (TRUE) { - spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ - palSetPad(GPIOC, GPIOC_LED4); /* LED ON. */ - spiStart(&SPID2, &hs_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID2); /* Slave Select assertion. */ - spiExchange(&SPID2, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID2); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID2); /* Ownership release. */ - } - return 0; -} - -/* - * SPI bus contender 2. - */ -static WORKING_AREA(spi_thread_2_wa, 256); -static msg_t spi_thread_2(void *p) { - - (void)p; - chRegSetThreadName("SPI thread 2"); - while (TRUE) { - spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ - palClearPad(GPIOC, GPIOC_LED4); /* LED OFF. */ - spiStart(&SPID2, &ls_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID2); /* Slave Select assertion. */ - spiExchange(&SPID2, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID2); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID2); /* Ownership release. */ - } - return 0; -} -/* - * This is a periodic thread that does absolutely nothing except flashing - * a LED. - */ -static WORKING_AREA(blinker_wa, 128); -static msg_t blinker(void *arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - palSetPad(GPIOC, GPIOC_LED3); - chThdSleepMilliseconds(500); - palClearPad(GPIOC, GPIOC_LED3); - chThdSleepMilliseconds(500); - } -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * SPI2 I/O pins setup. - */ - palSetPadMode(GPIOB, 13, PAL_MODE_ALTERNATE(0) | - PAL_STM32_OSPEED_HIGHEST); /* New SCK. */ - palSetPadMode(GPIOB, 14, PAL_MODE_ALTERNATE(0) | - PAL_STM32_OSPEED_HIGHEST); /* New MISO. */ - palSetPadMode(GPIOB, 15, PAL_MODE_ALTERNATE(0) | - PAL_STM32_OSPEED_HIGHEST); /* New MOSI. */ - palSetPad(GPIOB, 12); - palSetPadMode(GPIOB, 12, PAL_MODE_OUTPUT_PUSHPULL | - PAL_STM32_OSPEED_HIGHEST); /* New CS. */ - - /* - * Prepare transmit pattern. - */ - for (i = 0; i < sizeof(txbuf); i++) - txbuf[i] = (uint8_t)i; - - /* - * Starting the transmitter and receiver threads. - */ - chThdCreateStatic(spi_thread_1_wa, sizeof(spi_thread_1_wa), - NORMALPRIO + 1, spi_thread_1, NULL); - chThdCreateStatic(spi_thread_2_wa, sizeof(spi_thread_2_wa), - NORMALPRIO + 1, spi_thread_2, NULL); - - /* - * Starting the blinker thread. - */ - chThdCreateStatic(blinker_wa, sizeof(blinker_wa), - NORMALPRIO-1, blinker, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F0xx/SPI/mcuconf.h b/testhal/STM32F0xx/SPI/mcuconf.h deleted file mode 100644 index cf60d78be..000000000 --- a/testhal/STM32F0xx/SPI/mcuconf.h +++ /dev/null @@ -1,147 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F0xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() diff --git a/testhal/STM32F0xx/SPI/readme.txt b/testhal/STM32F0xx/SPI/readme.txt deleted file mode 100644 index 636a7c248..000000000 --- a/testhal/STM32F0xx/SPI/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - SPI driver demo for STM32F0xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an ST STM32F0-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F0xx SPI driver. - -** Board Setup ** - -- Connect PB14 and PB15 together for SPI loop-back. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F0xx/UART/.cproject b/testhal/STM32F0xx/UART/.cproject deleted file mode 100644 index 9dc8b7121..000000000 --- a/testhal/STM32F0xx/UART/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F0xx/UART/.project b/testhal/STM32F0xx/UART/.project deleted file mode 100644 index d05252ac5..000000000 --- a/testhal/STM32F0xx/UART/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F0xx-UART - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32F0_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F0xx/UART/Makefile b/testhal/STM32F0xx/UART/Makefile deleted file mode 100644 index 0b2d556fb..000000000 --- a/testhal/STM32F0xx/UART/Makefile +++ /dev/null @@ -1,207 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32F0_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F0xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F0xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F051x8.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F0xx/UART/chconf.h b/testhal/STM32F0xx/UART/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F0xx/UART/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F0xx/UART/halconf.h b/testhal/STM32F0xx/UART/halconf.h deleted file mode 100644 index a4fc70926..000000000 --- a/testhal/STM32F0xx/UART/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART TRUE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F0xx/UART/main.c b/testhal/STM32F0xx/UART/main.c deleted file mode 100644 index aa52aeb77..000000000 --- a/testhal/STM32F0xx/UART/main.c +++ /dev/null @@ -1,144 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static VirtualTimer vt1, vt2; - -static void restart(void *p) { - - (void)p; - - chSysLockFromIsr(); - uartStartSendI(&UARTD1, 14, "Hello World!\r\n"); - chSysUnlockFromIsr(); -} - -static void ledoff(void *p) { - - (void)p; - palClearPad(GPIOC, GPIOC_LED4); -} - -/* - * This callback is invoked when a transmission buffer has been completely - * read by the driver. - */ -static void txend1(UARTDriver *uartp) { - - (void)uartp; - palSetPad(GPIOC, GPIOC_LED4); -} - -/* - * This callback is invoked when a transmission has physically completed. - */ -static void txend2(UARTDriver *uartp) { - - (void)uartp; - palClearPad(GPIOC, GPIOC_LED4); - chSysLockFromIsr(); - if (chVTIsArmedI(&vt1)) - chVTResetI(&vt1); - chVTSetI(&vt1, MS2ST(5000), restart, NULL); - chSysUnlockFromIsr(); -} - -/* - * This callback is invoked on a receive error, the errors mask is passed - * as parameter. - */ -static void rxerr(UARTDriver *uartp, uartflags_t e) { - - (void)uartp; - (void)e; -} - -/* - * This callback is invoked when a character is received but the application - * was not ready to receive it, the character is passed as parameter. - */ -static void rxchar(UARTDriver *uartp, uint16_t c) { - - (void)uartp; - (void)c; - /* Flashing the LED each time a character is received.*/ - palSetPad(GPIOC, GPIOC_LED4); - chSysLockFromIsr(); - if (chVTIsArmedI(&vt2)) - chVTResetI(&vt2); - chVTSetI(&vt2, MS2ST(200), ledoff, NULL); - chSysUnlockFromIsr(); -} - -/* - * This callback is invoked when a receive buffer has been completely written. - */ -static void rxend(UARTDriver *uartp) { - - (void)uartp; -} - -/* - * UART driver configuration structure. - */ -static UARTConfig uart_cfg_1 = { - txend1, - txend2, - rxend, - rxchar, - rxerr, - 38400, - 0, - USART_CR2_LINEN, - 0 -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the serial driver 1, PA9 and PA10 are routed to USART1. - */ - uartStart(&UARTD1, &uart_cfg_1); - palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(1)); /* USART1 TX. */ - palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(1)); /* USART1 RX. */ - - /* - * Starts the transmission, it will be handled entirely in background. - */ - uartStartSend(&UARTD1, 13, "Starting...\r\n"); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } -} diff --git a/testhal/STM32F0xx/UART/mcuconf.h b/testhal/STM32F0xx/UART/mcuconf.h deleted file mode 100644 index fb5ea8f3d..000000000 --- a/testhal/STM32F0xx/UART/mcuconf.h +++ /dev/null @@ -1,147 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F0xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_ADCSW STM32_ADCSW_HSI14 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 TRUE -#define STM32_UART_USE_USART2 TRUE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() diff --git a/testhal/STM32F0xx/UART/readme.txt b/testhal/STM32F0xx/UART/readme.txt deleted file mode 100644 index 921f1bc8e..000000000 --- a/testhal/STM32F0xx/UART/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - UART driver demo for STM32F0xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F0-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F0xx UART driver. - -** Board Setup ** - -- Connect an RS232 transceiver to pins PA9(TX) and PA10(RX). -- Connect a terminal emulator to the transceiver (38400-N-8-1). - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F1xx/ADC/Makefile b/testhal/STM32F1xx/ADC/Makefile deleted file mode 100644 index 0f7e20317..000000000 --- a/testhal/STM32F1xx/ADC/Makefile +++ /dev/null @@ -1,209 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/OLIMEX_STM32_P103/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F1xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F1xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F103xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - $(CHIBIOS)/os/various/syscalls.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F1xx/ADC/chconf.h b/testhal/STM32F1xx/ADC/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F1xx/ADC/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/ADC/halconf.h b/testhal/STM32F1xx/ADC/halconf.h deleted file mode 100644 index 85a5dbd3b..000000000 --- a/testhal/STM32F1xx/ADC/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC TRUE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/ADC/main.c b/testhal/STM32F1xx/ADC/main.c deleted file mode 100644 index 43ae179ee..000000000 --- a/testhal/STM32F1xx/ADC/main.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#define ADC_GRP1_NUM_CHANNELS 1 -#define ADC_GRP1_BUF_DEPTH 8 - -#define ADC_GRP2_NUM_CHANNELS 8 -#define ADC_GRP2_BUF_DEPTH 16 - -static adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH]; -static adcsample_t samples2[ADC_GRP2_NUM_CHANNELS * ADC_GRP2_BUF_DEPTH]; - -/* - * ADC streaming callback. - */ -size_t nx = 0, ny = 0; -static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) { - - (void)adcp; - if (samples2 == buffer) { - nx += n; - } - else { - ny += n; - } -} - -static void adcerrorcallback(ADCDriver *adcp, adcerror_t err) { - - (void)adcp; - (void)err; -} - -/* - * ADC conversion group. - * Mode: Linear buffer, 8 samples of 1 channel, SW triggered. - * Channels: IN10. - */ -static const ADCConversionGroup adcgrpcfg1 = { - FALSE, - ADC_GRP1_NUM_CHANNELS, - NULL, - adcerrorcallback, - 0, 0, /* CR1, CR2 */ - ADC_SMPR1_SMP_AN10(ADC_SAMPLE_1P5), - 0, /* SMPR2 */ - ADC_SQR1_NUM_CH(ADC_GRP1_NUM_CHANNELS), - 0, /* SQR2 */ - ADC_SQR3_SQ1_N(ADC_CHANNEL_IN10) -}; - -/* - * ADC conversion group. - * Mode: Continuous, 16 samples of 8 channels, SW triggered. - * Channels: IN10, IN11, IN10, IN11, IN10, IN11, Sensor, VRef. - */ -static const ADCConversionGroup adcgrpcfg2 = { - TRUE, - ADC_GRP2_NUM_CHANNELS, - adccallback, - adcerrorcallback, - 0, ADC_CR2_TSVREFE, /* CR1, CR2 */ - ADC_SMPR1_SMP_AN11(ADC_SAMPLE_41P5) | ADC_SMPR1_SMP_AN10(ADC_SAMPLE_41P5) | - ADC_SMPR1_SMP_SENSOR(ADC_SAMPLE_239P5) | ADC_SMPR1_SMP_VREF(ADC_SAMPLE_239P5), - 0, /* SMPR2 */ - ADC_SQR1_NUM_CH(ADC_GRP2_NUM_CHANNELS), - ADC_SQR2_SQ8_N(ADC_CHANNEL_SENSOR) | ADC_SQR2_SQ7_N(ADC_CHANNEL_VREFINT), - ADC_SQR3_SQ6_N(ADC_CHANNEL_IN11) | ADC_SQR3_SQ5_N(ADC_CHANNEL_IN10) | - ADC_SQR3_SQ4_N(ADC_CHANNEL_IN11) | ADC_SQR3_SQ3_N(ADC_CHANNEL_IN10) | - ADC_SQR3_SQ2_N(ADC_CHANNEL_IN11) | ADC_SQR3_SQ1_N(ADC_CHANNEL_IN10) -}; - -/* - * Red LEDs blinker thread, times are in milliseconds. - */ -static WORKING_AREA(waThread1, 128); -static msg_t Thread1(void *arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - palClearPad(IOPORT3, GPIOC_LED); - chThdSleepMilliseconds(500); - palSetPad(IOPORT3, GPIOC_LED); - chThdSleepMilliseconds(500); - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Setting up analog inputs used by the demo. - */ - palSetGroupMode(GPIOC, PAL_PORT_BIT(0) | PAL_PORT_BIT(1), - 0, PAL_MODE_INPUT_ANALOG); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Activates the ADC1 driver and the temperature sensor. - */ - adcStart(&ADCD1, NULL); - - /* - * Linear conversion. - */ - adcConvert(&ADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH); - chThdSleepMilliseconds(1000); - - /* - * Starts an ADC continuous conversion. - */ - adcStartConversion(&ADCD1, &adcgrpcfg2, samples2, ADC_GRP2_BUF_DEPTH); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - if (palReadPad(GPIOA, GPIOA_BUTTON)) - adcStopConversion(&ADCD1); - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F1xx/ADC/mcuconf.h b/testhal/STM32F1xx/ADC/mcuconf.h deleted file mode 100644 index 1b3927677..000000000 --- a/testhal/STM32F1xx/ADC/mcuconf.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 TRUE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - diff --git a/testhal/STM32F1xx/ADC/readme.txt b/testhal/STM32F1xx/ADC/readme.txt deleted file mode 100644 index 1502425f4..000000000 --- a/testhal/STM32F1xx/ADC/readme.txt +++ /dev/null @@ -1,26 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - ADC driver demo for STM32. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Olimex STM32-P103 board. - -** The Demo ** - -The application demonstrates the use of the STM32 ADC driver. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F1xx/CAN/Makefile b/testhal/STM32F1xx/CAN/Makefile deleted file mode 100644 index 0f7e20317..000000000 --- a/testhal/STM32F1xx/CAN/Makefile +++ /dev/null @@ -1,209 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/OLIMEX_STM32_P103/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F1xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F1xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F103xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - $(CHIBIOS)/os/various/syscalls.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F1xx/CAN/chconf.h b/testhal/STM32F1xx/CAN/chconf.h deleted file mode 100644 index f943ea80c..000000000 --- a/testhal/STM32F1xx/CAN/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE FALSE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/CAN/halconf.h b/testhal/STM32F1xx/CAN/halconf.h deleted file mode 100644 index 5b6535967..000000000 --- a/testhal/STM32F1xx/CAN/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN TRUE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/CAN/main.c b/testhal/STM32F1xx/CAN/main.c deleted file mode 100644 index 43164e1ce..000000000 --- a/testhal/STM32F1xx/CAN/main.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * Internal loopback mode, 500KBaud, automatic wakeup, automatic recover - * from abort mode. - * See section 22.7.7 on the STM32 reference manual. - */ -static const CANConfig cancfg = { - CAN_MCR_ABOM | CAN_MCR_AWUM | CAN_MCR_TXFP, - CAN_BTR_LBKM | CAN_BTR_SJW(0) | CAN_BTR_TS2(1) | - CAN_BTR_TS1(8) | CAN_BTR_BRP(6) -}; - -/* - * Receiver thread. - */ -static WORKING_AREA(can_rx_wa, 256); -static msg_t can_rx(void *p) { - EventListener el; - CANRxFrame rxmsg; - - (void)p; - chRegSetThreadName("receiver"); - chEvtRegister(&CAND1.rxfull_event, &el, 0); - while(!chThdShouldTerminate()) { - if (chEvtWaitAnyTimeout(ALL_EVENTS, MS2ST(100)) == 0) - continue; - while (canReceive(&CAND1, CAN_ANY_MAILBOX, &rxmsg, TIME_IMMEDIATE) == RDY_OK) { - /* Process message.*/ - palTogglePad(IOPORT3, GPIOC_LED); - } - } - chEvtUnregister(&CAND1.rxfull_event, &el); - return 0; -} - -/* - * Transmitter thread. - */ -static WORKING_AREA(can_tx_wa, 256); -static msg_t can_tx(void * p) { - CANTxFrame txmsg; - - (void)p; - chRegSetThreadName("transmitter"); - txmsg.IDE = CAN_IDE_EXT; - txmsg.EID = 0x01234567; - txmsg.RTR = CAN_RTR_DATA; - txmsg.DLC = 8; - txmsg.data32[0] = 0x55AA55AA; - txmsg.data32[1] = 0x00FF00FF; - - while (!chThdShouldTerminate()) { - canTransmit(&CAND1, CAN_ANY_MAILBOX, &txmsg, MS2ST(100)); - chThdSleepMilliseconds(500); - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the CAN driver 1. - */ - canStart(&CAND1, &cancfg); - - /* - * Starting the transmitter and receiver threads. - */ - chThdCreateStatic(can_rx_wa, sizeof(can_rx_wa), NORMALPRIO + 7, can_rx, NULL); - chThdCreateStatic(can_tx_wa, sizeof(can_tx_wa), NORMALPRIO + 7, can_tx, NULL); - - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F1xx/CAN/mcuconf.h b/testhal/STM32F1xx/CAN/mcuconf.h deleted file mode 100644 index 06bc8c715..000000000 --- a/testhal/STM32F1xx/CAN/mcuconf.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 TRUE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - diff --git a/testhal/STM32F1xx/CAN/readme.txt b/testhal/STM32F1xx/CAN/readme.txt deleted file mode 100644 index b78112885..000000000 --- a/testhal/STM32F1xx/CAN/readme.txt +++ /dev/null @@ -1,26 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - CAN driver demo for STM32. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Olimex STM32-P103 board. - -** The Demo ** - -The application demonstrates the use of the STM32 CAN driver. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F1xx/EXT/Makefile b/testhal/STM32F1xx/EXT/Makefile deleted file mode 100644 index e9b6719d7..000000000 --- a/testhal/STM32F1xx/EXT/Makefile +++ /dev/null @@ -1,208 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/OLIMEX_STM32_P103/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F1xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F1xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F103xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - $(CHIBIOS)/os/various/syscalls.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F1xx/EXT/chconf.h b/testhal/STM32F1xx/EXT/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F1xx/EXT/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/EXT/halconf.h b/testhal/STM32F1xx/EXT/halconf.h deleted file mode 100644 index e0e0c38ff..000000000 --- a/testhal/STM32F1xx/EXT/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/EXT/main.c b/testhal/STM32F1xx/EXT/main.c deleted file mode 100644 index e0fcd896c..000000000 --- a/testhal/STM32F1xx/EXT/main.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static VirtualTimer vt; - -/* LED set to OFF after 200mS.*/ -static void ledoff(void *arg) { - - (void)arg; - palSetPad(GPIOC, GPIOC_LED); -} - -/* Triggered when the button is pressed or released. The LED is set to ON.*/ -static void extcb1(EXTDriver *extp, expchannel_t channel) { - - (void)extp; - (void)channel; - palClearPad(GPIOC, GPIOC_LED); - chSysLockFromIsr(); - if (!chVTIsArmedI(&vt)) - chVTSetI(&vt, MS2ST(200), ledoff, NULL); - chSysUnlockFromIsr(); -} - -/* Triggered when the LED goes OFF.*/ -static void extcb2(EXTDriver *extp, expchannel_t channel) { - - (void)extp; - (void)channel; -} - -static const EXTConfig extcfg = { - { - {EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOA, extcb1}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_RISING_EDGE | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOC, extcb2}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL} - } -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the EXT driver 1. - */ - extStart(&EXTD1, &extcfg); - - /* - * Normal main() thread activity, in this demo it enables and disables the - * button EXT channel using 5 seconds intervals. - */ - while (TRUE) { - chThdSleepMilliseconds(5000); - extChannelDisable(&EXTD1, 0); - chThdSleepMilliseconds(5000); - extChannelEnable(&EXTD1, 0); - } -} diff --git a/testhal/STM32F1xx/EXT/mcuconf.h b/testhal/STM32F1xx/EXT/mcuconf.h deleted file mode 100644 index d7d712736..000000000 --- a/testhal/STM32F1xx/EXT/mcuconf.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - diff --git a/testhal/STM32F1xx/EXT/readme.txt b/testhal/STM32F1xx/EXT/readme.txt deleted file mode 100644 index 48288c565..000000000 --- a/testhal/STM32F1xx/EXT/readme.txt +++ /dev/null @@ -1,26 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - EXT driver demo for STM32. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Olimex STM32-P103 board. - -** The Demo ** - -The application demonstrates the use of the STM32 EXT driver. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F1xx/GPT/Makefile b/testhal/STM32F1xx/GPT/Makefile deleted file mode 100644 index 0f7e20317..000000000 --- a/testhal/STM32F1xx/GPT/Makefile +++ /dev/null @@ -1,209 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/OLIMEX_STM32_P103/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F1xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F1xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F103xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - $(CHIBIOS)/os/various/syscalls.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F1xx/GPT/chconf.h b/testhal/STM32F1xx/GPT/chconf.h deleted file mode 100644 index f943ea80c..000000000 --- a/testhal/STM32F1xx/GPT/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE FALSE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/GPT/halconf.h b/testhal/STM32F1xx/GPT/halconf.h deleted file mode 100644 index 554b4e9ca..000000000 --- a/testhal/STM32F1xx/GPT/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/GPT/main.c b/testhal/STM32F1xx/GPT/main.c deleted file mode 100644 index f14ffd941..000000000 --- a/testhal/STM32F1xx/GPT/main.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * GPT1 callback. - */ -static void gpt1cb(GPTDriver *gptp) { - - (void)gptp; - palClearPad(IOPORT3, GPIOC_LED); - chSysLockFromIsr(); - gptStartOneShotI(&GPTD2, 200); /* 0.02 second pulse.*/ - chSysUnlockFromIsr(); -} - -/* - * GPT2 callback. - */ -static void gpt2cb(GPTDriver *gptp) { - - (void)gptp; - palSetPad(IOPORT3, GPIOC_LED); -} - -/* - * GPT1 configuration. - */ -static const GPTConfig gpt1cfg = { - 10000, /* 10kHz timer clock.*/ - gpt1cb /* Timer callback.*/ -}; - -/* - * GPT2 configuration. - */ -static const GPTConfig gpt2cfg = { - 10000, /* 10kHz timer clock.*/ - gpt2cb /* Timer callback.*/ -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes the GPT drivers 1 and 2. - */ - gptStart(&GPTD1, &gpt1cfg); - gptPolledDelay(&GPTD1, 10); /* Small delay.*/ - gptStart(&GPTD2, &gpt2cfg); - gptPolledDelay(&GPTD2, 10); /* Small delay.*/ - - /* - * Normal main() thread activity, it changes the GPT1 period every - * five seconds. - */ - while (TRUE) { - gptStartContinuous(&GPTD1, 5000); - chThdSleepMilliseconds(5000); - gptStopTimer(&GPTD1); - gptStartContinuous(&GPTD1, 2500); - chThdSleepMilliseconds(5000); - gptStopTimer(&GPTD1); - } - return 0; -} diff --git a/testhal/STM32F1xx/GPT/mcuconf.h b/testhal/STM32F1xx/GPT/mcuconf.h deleted file mode 100644 index e987d18f5..000000000 --- a/testhal/STM32F1xx/GPT/mcuconf.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 TRUE -#define STM32_GPT_USE_TIM2 TRUE -#define STM32_GPT_USE_TIM3 TRUE -#define STM32_GPT_USE_TIM4 TRUE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - diff --git a/testhal/STM32F1xx/GPT/readme.txt b/testhal/STM32F1xx/GPT/readme.txt deleted file mode 100644 index 2355ef173..000000000 --- a/testhal/STM32F1xx/GPT/readme.txt +++ /dev/null @@ -1,26 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - GPT driver demo for STM32. ** -***************************************************************************** - -** TARGET ** - -The demo will on an Olimex STM32-P103 board. - -** The Demo ** - -The application demonstrates the use of the STM32 GPT driver. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F1xx/I2C/Makefile b/testhal/STM32F1xx/I2C/Makefile deleted file mode 100644 index 24cebda3b..000000000 --- a/testhal/STM32F1xx/I2C/Makefile +++ /dev/null @@ -1,220 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 -Wall -Wextra - #USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -Wall -Wextra -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F103xB.ld - -# Imported source files -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/OLIMEX_STM32_103STK/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F1xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F1xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - $(CHIBIOS)/os/various/syscalls.c \ - main.c \ - i2c_pns.c \ - tmp75.c \ - fake.c \ - lis3.c - - - - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. - -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk - - diff --git a/testhal/STM32F1xx/I2C/chconf.h b/testhal/STM32F1xx/I2C/chconf.h deleted file mode 100644 index c1dec4b48..000000000 --- a/testhal/STM32F1xx/I2C/chconf.h +++ /dev/null @@ -1,505 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/* Kernel parameters. */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 0//20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/*===========================================================================*/ -/* Performance options. */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED FALSE -#endif - -/*===========================================================================*/ -/* Subsystem options. */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS FALSE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT FALSE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP FALSE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC FALSE -#endif - -/*===========================================================================*/ -/* Debug options. */ -/*===========================================================================*/ -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE FALSE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/*===========================================================================*/ -/* Kernel hooks. */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/I2C/fake.c b/testhal/STM32F1xx/I2C/fake.c deleted file mode 100644 index 74fc44539..000000000 --- a/testhal/STM32F1xx/I2C/fake.c +++ /dev/null @@ -1,61 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * Not responding slave test - */ - -#include - -#include "ch.h" -#include "hal.h" - -#include "fake.h" - - -/* input buffer */ -static uint8_t rx_data[2]; - -/* temperature value */ -static int16_t temperature = 0; - -static i2cflags_t errors = 0; - -#define addr 0b1001100 - -/* This is main function. */ -void request_fake(void){ - msg_t status = RDY_OK; - systime_t tmo = MS2ST(4); - - i2cAcquireBus(&I2CD1); - status = i2cMasterReceiveTimeout(&I2CD1, addr, rx_data, 2, tmo); - i2cReleaseBus(&I2CD1); - - if (status == RDY_RESET){ - errors = i2cGetErrors(&I2CD1); - if (errors == I2CD_ACK_FAILURE){ - /* there is no slave with given address on the bus, or it was die */ - return; - } - } - - else{ - temperature = (rx_data[0] << 8) + rx_data[1]; - } -} - - diff --git a/testhal/STM32F1xx/I2C/fake.h b/testhal/STM32F1xx/I2C/fake.h deleted file mode 100644 index 2869b0c93..000000000 --- a/testhal/STM32F1xx/I2C/fake.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef FAKE_H_ -#define FAKE_H_ - -void request_fake(void); - -#endif /* FAKE_H_ */ diff --git a/testhal/STM32F1xx/I2C/halconf.h b/testhal/STM32F1xx/I2C/halconf.h deleted file mode 100644 index 3ac5de5ba..000000000 --- a/testhal/STM32F1xx/I2C/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/I2C/i2c_pns.c b/testhal/STM32F1xx/I2C/i2c_pns.c deleted file mode 100644 index 3cb568ce8..000000000 --- a/testhal/STM32F1xx/I2C/i2c_pns.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#include "i2c_pns.h" -#include "lis3.h" - - -/* I2C1 */ -static const I2CConfig i2cfg1 = { - OPMODE_I2C, - 400000, - FAST_DUTY_CYCLE_2, -}; - - - -void I2CInit_pns(void){ - i2cInit(); - - i2cStart(&I2CD1, &i2cfg1); - - /* tune ports for I2C1*/ - palSetPadMode(IOPORT2, 6, PAL_MODE_STM32_ALTERNATE_OPENDRAIN); - palSetPadMode(IOPORT2, 7, PAL_MODE_STM32_ALTERNATE_OPENDRAIN); - - chThdSleepMilliseconds(100); /* Just to be safe. */ - - init_lis3(); /* accelerometer init */ -} - - diff --git a/testhal/STM32F1xx/I2C/i2c_pns.h b/testhal/STM32F1xx/I2C/i2c_pns.h deleted file mode 100644 index b01c85b7e..000000000 --- a/testhal/STM32F1xx/I2C/i2c_pns.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef I2C_PNS_H_ -#define I2C_PNS_H_ - - -void I2CInit_pns(void); - - -#endif /* I2C_PNS_H_ */ diff --git a/testhal/STM32F1xx/I2C/lis3.c b/testhal/STM32F1xx/I2C/lis3.c deleted file mode 100644 index e55d1180e..000000000 --- a/testhal/STM32F1xx/I2C/lis3.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * This is device realize "read through write" paradigm. This is not - * standard, but most of I2C devices use this paradigm. - * You must write to device reading address, send restart to bus, - * and then begin reading process. - */ - -#include - -#include "ch.h" -#include "hal.h" - -#include "lis3.h" - - -#define lis3_addr 0b0011101 - - -/* buffers */ -static uint8_t accel_rx_data[ACCEL_RX_DEPTH]; -static uint8_t accel_tx_data[ACCEL_TX_DEPTH]; - -static i2cflags_t errors = 0; - -static int16_t acceleration_x = 0; -static int16_t acceleration_y = 0; -static int16_t acceleration_z = 0; - - -/** - * Init function. Here we will also start personal serving thread. - */ -int init_lis3(void){ - msg_t status = RDY_OK; - systime_t tmo = MS2ST(4); - - /* configure accelerometer */ - accel_tx_data[0] = ACCEL_CTRL_REG1 | AUTO_INCREMENT_BIT; /* register address */ - accel_tx_data[1] = 0b11100111; - accel_tx_data[2] = 0b01000001; - accel_tx_data[3] = 0b00000000; - - /* sending */ - i2cAcquireBus(&I2CD1); - status = i2cMasterTransmitTimeout(&I2CD1, lis3_addr, accel_tx_data, 4, accel_rx_data, 0, tmo); - i2cReleaseBus(&I2CD1); - - if (status != RDY_OK){ - errors = i2cGetErrors(&I2CD1); - } - - return 0; -} - -/** - * - */ -void request_acceleration_data(void){ - msg_t status = RDY_OK; - systime_t tmo = MS2ST(4); - - accel_tx_data[0] = ACCEL_OUT_DATA | AUTO_INCREMENT_BIT; /* register address */ - i2cAcquireBus(&I2CD1); - status = i2cMasterTransmitTimeout(&I2CD1, lis3_addr, accel_tx_data, 1, accel_rx_data, 6, tmo); - i2cReleaseBus(&I2CD1); - - if (status != RDY_OK){ - errors = i2cGetErrors(&I2CD1); - } - - acceleration_x = accel_rx_data[0] + (accel_rx_data[1] << 8); - acceleration_y = accel_rx_data[2] + (accel_rx_data[3] << 8); - acceleration_z = accel_rx_data[4] + (accel_rx_data[5] << 8); -} - diff --git a/testhal/STM32F1xx/I2C/lis3.h b/testhal/STM32F1xx/I2C/lis3.h deleted file mode 100644 index f48b7cd20..000000000 --- a/testhal/STM32F1xx/I2C/lis3.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include -#include "ch.h" - -#ifndef LIS3_H_ -#define LIS3_H_ - - - -/* buffers depth */ -#define ACCEL_RX_DEPTH 8 -#define ACCEL_TX_DEPTH 8 - -/* autoincrement bit position. This bit needs to perform reading of - * multiple bytes at one request */ -#define AUTO_INCREMENT_BIT (1<<7) - -/* slave specific addresses */ -#define ACCEL_STATUS_REG 0x27 -#define ACCEL_CTRL_REG1 0x20 -#define ACCEL_OUT_DATA 0x28 - - - -inline int init_lis3(void); -inline void request_acceleration_data(void); - - -#endif /* LIS3_H_ */ diff --git a/testhal/STM32F1xx/I2C/main.c b/testhal/STM32F1xx/I2C/main.c deleted file mode 100644 index cba3dad3a..000000000 --- a/testhal/STM32F1xx/I2C/main.c +++ /dev/null @@ -1,135 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ -/* - Concepts and parts of this file have been contributed by Uladzimir Pylinsky - aka barthess. - */ - -#include - -#include "ch.h" -#include "hal.h" - -#include "i2c_pns.h" -#include "lis3.h" -#include "tmp75.h" -#include "fake.h" - - -/* - * Red LEDs blinker thread, times are in milliseconds. - */ -static WORKING_AREA(BlinkWA, 64); -static msg_t Blink(void *arg) { - chRegSetThreadName("Blink"); - (void)arg; - while (TRUE) { - palClearPad(IOPORT3, GPIOC_LED); - chThdSleepMilliseconds(500); - palSetPad(IOPORT3, GPIOC_LED); - chThdSleepMilliseconds(500); - } - return 0; -} - -/* - * Accelerometer thread - */ -static WORKING_AREA(PollAccelThreadWA, 256); -static msg_t PollAccelThread(void *arg) { - chRegSetThreadName("PollAccel"); - (void)arg; - while (TRUE) { - /*chThdSleepMilliseconds(rand() & 31);*/ - chThdSleepMilliseconds(32); - request_acceleration_data(); - } - return 0; -} - - -/* Temperature polling thread */ -static WORKING_AREA(PollTmp75ThreadWA, 256); -static msg_t PollTmp75Thread(void *arg) { - chRegSetThreadName("PollTmp75"); - (void)arg; - while (TRUE) { - /*chThdSleepMilliseconds(rand() & 31);*/ - chThdSleepMilliseconds(15); - /* Call reading function */ - request_temperature(); - } - return 0; -} - - -/* Temperature polling thread */ -static WORKING_AREA(PollFakeThreadWA, 256); -static msg_t PollFakeThread(void *arg) { - chRegSetThreadName("PollFake"); - (void)arg; - while (TRUE) { - chThdSleepMilliseconds(16); - /* Call reading function */ - request_fake(); - } - return 0; -} - - -/* - * Entry point, note, the main() function is already a thread in the system - * on entry. - */ -int main(void) { - - halInit(); - chSysInit(); - - chThdSleepMilliseconds(200); - I2CInit_pns(); - - /* Create accelerometer thread */ - chThdCreateStatic(PollAccelThreadWA, - sizeof(PollAccelThreadWA), - NORMALPRIO, - PollAccelThread, - NULL); - - /* Create temperature thread */ - chThdCreateStatic(PollTmp75ThreadWA, - sizeof(PollTmp75ThreadWA), - NORMALPRIO, - PollTmp75Thread, - NULL); - - /* Create not responding thread */ - chThdCreateStatic(PollFakeThreadWA, - sizeof(PollFakeThreadWA), - NORMALPRIO, - PollFakeThread, - NULL); - - /* Creates the blinker thread. */ - chThdCreateStatic(BlinkWA, sizeof(BlinkWA), HIGHPRIO, Blink, NULL); - - /* main loop that do nothing */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - - return 0; -} diff --git a/testhal/STM32F1xx/I2C/mcuconf.h b/testhal/STM32F1xx/I2C/mcuconf.h deleted file mode 100644 index a5748e0e8..000000000 --- a/testhal/STM32F1xx/I2C/mcuconf.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 TRUE -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - diff --git a/testhal/STM32F1xx/I2C/tmp75.c b/testhal/STM32F1xx/I2C/tmp75.c deleted file mode 100644 index 478c322fa..000000000 --- a/testhal/STM32F1xx/I2C/tmp75.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * TMP75 is most simple I2C device in our case. It is already useful with - * default settings after powerup. - * You only must read 2 sequential bytes from it. - */ - -#include - -#include "ch.h" -#include "hal.h" - -#include "tmp75.h" - - -/* input buffer */ -static uint8_t tmp75_rx_data[TMP75_RX_DEPTH]; - -/* temperature value */ -static int16_t temperature = 0; - -static i2cflags_t errors = 0; - -#define tmp75_addr 0b1001000 - -/* This is main function. */ -void request_temperature(void){ - int16_t t_int = 0, t_frac = 0; - msg_t status = RDY_OK; - systime_t tmo = MS2ST(4); - - i2cAcquireBus(&I2CD1); - status = i2cMasterReceiveTimeout(&I2CD1, tmp75_addr, tmp75_rx_data, 2, tmo); - i2cReleaseBus(&I2CD1); - - if (status != RDY_OK){ - errors = i2cGetErrors(&I2CD1); - } - - t_int = tmp75_rx_data[0] * 100; - t_frac = (tmp75_rx_data[1] * 100) >> 8; - temperature = t_int + t_frac; -} - - diff --git a/testhal/STM32F1xx/I2C/tmp75.h b/testhal/STM32F1xx/I2C/tmp75.h deleted file mode 100644 index 57729b9db..000000000 --- a/testhal/STM32F1xx/I2C/tmp75.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef TMP75_H_ -#define TMP75_H_ - - - -/* buffers depth */ -#define TMP75_RX_DEPTH 2 -#define TMP75_TX_DEPTH 2 - -void init_tmp75(void); -void request_temperature(void); - -#endif /* TMP75_H_ */ diff --git a/testhal/STM32F1xx/IRQ_STORM/Makefile b/testhal/STM32F1xx/IRQ_STORM/Makefile deleted file mode 100644 index 0f7e20317..000000000 --- a/testhal/STM32F1xx/IRQ_STORM/Makefile +++ /dev/null @@ -1,209 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/OLIMEX_STM32_P103/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F1xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F1xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F103xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - $(CHIBIOS)/os/various/syscalls.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F1xx/IRQ_STORM/chconf.h b/testhal/STM32F1xx/IRQ_STORM/chconf.h deleted file mode 100644 index f943ea80c..000000000 --- a/testhal/STM32F1xx/IRQ_STORM/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE FALSE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/IRQ_STORM/halconf.h b/testhal/STM32F1xx/IRQ_STORM/halconf.h deleted file mode 100644 index 117a5979b..000000000 --- a/testhal/STM32F1xx/IRQ_STORM/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/IRQ_STORM/main.c b/testhal/STM32F1xx/IRQ_STORM/main.c deleted file mode 100644 index 8961668b0..000000000 --- a/testhal/STM32F1xx/IRQ_STORM/main.c +++ /dev/null @@ -1,326 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include - -#include "ch.h" -#include "hal.h" - -/*===========================================================================*/ -/* Configurable settings. */ -/*===========================================================================*/ - -#ifndef RANDOMIZE -#define RANDOMIZE FALSE -#endif - -#ifndef ITERATIONS -#define ITERATIONS 100 -#endif - -#ifndef NUM_THREADS -#define NUM_THREADS 4 -#endif - -#ifndef MAILBOX_SIZE -#define MAILBOX_SIZE 4 -#endif - -/*===========================================================================*/ -/* Test related code. */ -/*===========================================================================*/ - -#define MSG_SEND_LEFT 0 -#define MSG_SEND_RIGHT 1 - -static bool_t saturated; - -/* - * Mailboxes and buffers. - */ -static Mailbox mb[NUM_THREADS]; -static msg_t b[NUM_THREADS][MAILBOX_SIZE]; - -/* - * Test worker threads. - */ -static WORKING_AREA(waWorkerThread[NUM_THREADS], 128); -static msg_t WorkerThread(void *arg) { - static volatile unsigned x = 0; - static unsigned cnt = 0; - unsigned me = (unsigned)arg; - unsigned target; - unsigned r; - msg_t msg; - - chRegSetThreadName("worker"); - - /* Work loop.*/ - while (TRUE) { - /* Waiting for a message.*/ - chMBFetch(&mb[me], &msg, TIME_INFINITE); - -#if RANDOMIZE - /* Pseudo-random delay.*/ - { - chSysLock(); - r = rand() & 15; - chSysUnlock(); - while (r--) - x++; - } -#else - /* Fixed delay.*/ - { - r = me >> 4; - while (r--) - x++; - } -#endif - - /* Deciding in which direction to re-send the message.*/ - if (msg == MSG_SEND_LEFT) - target = me - 1; - else - target = me + 1; - - if (target < NUM_THREADS) { - /* If this thread is not at the end of a chain re-sending the message, - note this check works because the variable target is unsigned.*/ - msg = chMBPost(&mb[target], msg, TIME_IMMEDIATE); - if (msg != RDY_OK) - saturated = TRUE; - } - else { - /* Provides a visual feedback about the system.*/ - if (++cnt >= 500) { - cnt = 0; - palTogglePad(GPIOC, GPIOC_LED); - } - } - } -} - -/* - * GPT1 callback. - */ -static void gpt1cb(GPTDriver *gptp) { - msg_t msg; - - (void)gptp; - chSysLockFromIsr(); - msg = chMBPostI(&mb[0], MSG_SEND_RIGHT); - if (msg != RDY_OK) - saturated = TRUE; - chSysUnlockFromIsr(); -} - -/* - * GPT2 callback. - */ -static void gpt2cb(GPTDriver *gptp) { - msg_t msg; - - (void)gptp; - chSysLockFromIsr(); - msg = chMBPostI(&mb[NUM_THREADS - 1], MSG_SEND_LEFT); - if (msg != RDY_OK) - saturated = TRUE; - chSysUnlockFromIsr(); -} - -/* - * GPT1 configuration. - */ -static const GPTConfig gpt1cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt1cb /* Timer callback.*/ -}; - -/* - * GPT2 configuration. - */ -static const GPTConfig gpt2cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt2cb /* Timer callback.*/ -}; - - -/*===========================================================================*/ -/* Generic demo code. */ -/*===========================================================================*/ - -static void print(char *p) { - - while (*p) { - chSequentialStreamPut(&SD2, *p++); - } -} - -static void println(char *p) { - - while (*p) { - chSequentialStreamPut(&SD2, *p++); - } - chSequentialStreamWrite(&SD2, (uint8_t *)"\r\n", 2); -} - -static void printn(uint32_t n) { - char buf[16], *p; - - if (!n) - chSequentialStreamPut(&SD2, '0'); - else { - p = buf; - while (n) - *p++ = (n % 10) + '0', n /= 10; - while (p > buf) - chSequentialStreamPut(&SD2, *--p); - } -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - gptcnt_t interval, threshold, worst; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Prepares the Serial driver 2 and GPT drivers 1 and 2. - */ - sdStart(&SD2, NULL); /* Default is 38400-8-N-1.*/ - gptStart(&GPTD1, &gpt1cfg); - gptStart(&GPTD2, &gpt2cfg); - - /* - * Initializes the mailboxes and creates the worker threads. - */ - for (i = 0; i < NUM_THREADS; i++) { - chMBInit(&mb[i], b[i], MAILBOX_SIZE); - chThdCreateStatic(waWorkerThread[i], sizeof waWorkerThread[i], - NORMALPRIO - 20, WorkerThread, (void *)i); - } - - /* - * Test procedure. - */ - println(""); - println("*** ChibiOS/RT IRQ-STORM long duration test"); - println("***"); - print("*** Kernel: "); - println(CH_KERNEL_VERSION); - print("*** Compiled: "); - println(__DATE__ " - " __TIME__); -#ifdef CH_COMPILER_NAME - print("*** Compiler: "); - println(CH_COMPILER_NAME); -#endif - print("*** Architecture: "); - println(CH_ARCHITECTURE_NAME); -#ifdef CH_CORE_VARIANT_NAME - print("*** Core Variant: "); - println(CH_CORE_VARIANT_NAME); -#endif -#ifdef CH_PORT_INFO - print("*** Port Info: "); - println(CH_PORT_INFO); -#endif -#ifdef PLATFORM_NAME - print("*** Platform: "); - println(PLATFORM_NAME); -#endif -#ifdef BOARD_NAME - print("*** Test Board: "); - println(BOARD_NAME); -#endif - println("***"); - print("*** System Clock: "); - printn(STM32_SYSCLK); - println(""); - print("*** Iterations: "); - printn(ITERATIONS); - println(""); - print("*** Randomize: "); - printn(RANDOMIZE); - println(""); - print("*** Threads: "); - printn(NUM_THREADS); - println(""); - print("*** Mailbox size: "); - printn(MAILBOX_SIZE); - println(""); - - println(""); - worst = 0; - for (i = 1; i <= ITERATIONS; i++){ - print("Iteration "); - printn(i); - println(""); - saturated = FALSE; - threshold = 0; - for (interval = 2000; interval >= 20; interval -= interval / 10) { - gptStartContinuous(&GPTD1, interval - 1); /* Slightly out of phase.*/ - gptStartContinuous(&GPTD2, interval + 1); /* Slightly out of phase.*/ - chThdSleepMilliseconds(1000); - gptStopTimer(&GPTD1); - gptStopTimer(&GPTD2); - if (!saturated) - print("."); - else { - print("#"); - if (threshold == 0) - threshold = interval; - } - } - /* Gives the worker threads a chance to empty the mailboxes before next - cycle.*/ - chThdSleepMilliseconds(20); - println(""); - print("Saturated at "); - printn(threshold); - println(" uS"); - println(""); - if (threshold > worst) - worst = threshold; - } - gptStopTimer(&GPTD1); - gptStopTimer(&GPTD2); - - print("Worst case at "); - printn(worst); - println(" uS"); - println(""); - println("Test Complete"); - - /* - * Normal main() thread activity, nothing in this test. - */ - while (TRUE) { - chThdSleepMilliseconds(5000); - } - return 0; -} diff --git a/testhal/STM32F1xx/IRQ_STORM/mcuconf.h b/testhal/STM32F1xx/IRQ_STORM/mcuconf.h deleted file mode 100644 index e607b235c..000000000 --- a/testhal/STM32F1xx/IRQ_STORM/mcuconf.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 TRUE -#define STM32_GPT_USE_TIM2 TRUE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 6 -#define STM32_GPT_TIM2_IRQ_PRIORITY 10 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - diff --git a/testhal/STM32F1xx/IRQ_STORM/readme.txt b/testhal/STM32F1xx/IRQ_STORM/readme.txt deleted file mode 100644 index 32f5a3781..000000000 --- a/testhal/STM32F1xx/IRQ_STORM/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - IRQ-STORM demo for STM32. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Olimex STM32-P103 board. - -** The Demo ** - -The application demonstrates the use of the STM32F1xx GPT, PAL and Serial -drivers in order to implement a system stress demo. - -** Board Setup ** - -None. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F1xx/PWM-ICU/Makefile b/testhal/STM32F1xx/PWM-ICU/Makefile deleted file mode 100644 index 0f7e20317..000000000 --- a/testhal/STM32F1xx/PWM-ICU/Makefile +++ /dev/null @@ -1,209 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/OLIMEX_STM32_P103/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F1xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F1xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F103xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - $(CHIBIOS)/os/various/syscalls.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F1xx/PWM-ICU/chconf.h b/testhal/STM32F1xx/PWM-ICU/chconf.h deleted file mode 100644 index f943ea80c..000000000 --- a/testhal/STM32F1xx/PWM-ICU/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE FALSE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/PWM-ICU/halconf.h b/testhal/STM32F1xx/PWM-ICU/halconf.h deleted file mode 100644 index 2f74c82c8..000000000 --- a/testhal/STM32F1xx/PWM-ICU/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU TRUE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/PWM-ICU/main.c b/testhal/STM32F1xx/PWM-ICU/main.c deleted file mode 100644 index a2ba2a12d..000000000 --- a/testhal/STM32F1xx/PWM-ICU/main.c +++ /dev/null @@ -1,139 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void pwmpcb(PWMDriver *pwmp) { - - (void)pwmp; - palSetPad(IOPORT3, GPIOC_LED); -} - -static void pwmc1cb(PWMDriver *pwmp) { - - (void)pwmp; - palClearPad(IOPORT3, GPIOC_LED); -} - -static PWMConfig pwmcfg = { - 10000, /* 10kHz PWM clock frequency. */ - 10000, /* Initial PWM period 1S. */ - pwmpcb, - { - {PWM_OUTPUT_ACTIVE_HIGH, pwmc1cb}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL} - }, - 0, -#if STM32_PWM_USE_ADVANCED - 0 -#endif -}; - -icucnt_t last_width, last_period; - -static void icuwidthcb(ICUDriver *icup) { - - last_width = icuGetWidth(icup); -} - -static void icuperiodcb(ICUDriver *icup) { - - last_period = icuGetPeriod(icup); -} - -static ICUConfig icucfg = { - ICU_INPUT_ACTIVE_HIGH, - 10000, /* 10kHz ICU clock frequency. */ - icuwidthcb, - icuperiodcb, - NULL, - ICU_CHANNEL_1 -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * LED initially off. - */ - palSetPad(IOPORT3, GPIOC_LED); - - /* - * Initializes the PWM driver 1 and ICU driver 4. - */ - pwmStart(&PWMD1, &pwmcfg); - palSetPadMode(IOPORT1, 8, PAL_MODE_STM32_ALTERNATE_PUSHPULL); - icuStart(&ICUD4, &icucfg); - icuEnable(&ICUD4); - chThdSleepMilliseconds(2000); - - /* - * Starts the PWM channel 0 using 75% duty cycle. - */ - pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 7500)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 50% duty cycle. - */ - pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 5000)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 25% duty cycle. - */ - pwmEnableChannel(&PWMD1, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD1, 2500)); - chThdSleepMilliseconds(5000); - - /* - * Changes PWM period to half second the duty cycle becomes 50% - * implicitly. - */ - pwmChangePeriod(&PWMD1, 5000); - chThdSleepMilliseconds(5000); - - /* - * Disables channel 0 and stops the drivers. - */ - pwmDisableChannel(&PWMD1, 0); - pwmStop(&PWMD1); - icuDisable(&ICUD4); - icuStop(&ICUD4); - palSetPad(IOPORT3, GPIOC_LED); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F1xx/PWM-ICU/mcuconf.h b/testhal/STM32F1xx/PWM-ICU/mcuconf.h deleted file mode 100644 index de845bbbe..000000000 --- a/testhal/STM32F1xx/PWM-ICU/mcuconf.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 TRUE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED TRUE -#define STM32_PWM_USE_TIM1 TRUE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - diff --git a/testhal/STM32F1xx/PWM-ICU/readme.txt b/testhal/STM32F1xx/PWM-ICU/readme.txt deleted file mode 100644 index 55ffef2cf..000000000 --- a/testhal/STM32F1xx/PWM-ICU/readme.txt +++ /dev/null @@ -1,28 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - PWM/ICU driver demo for STM32. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Olimex STM32-P103 board. - -** The Demo ** - -The application demonstrates the use of the STM32 PWM and ICU drivers. Pins -PA8 and PB6 must be connected in order to trigger the ICU input with the -PWM output. The ICU unit will measure the generated PWM. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F1xx/RTC/Makefile b/testhal/STM32F1xx/RTC/Makefile deleted file mode 100644 index 3d28124f2..000000000 --- a/testhal/STM32F1xx/RTC/Makefile +++ /dev/null @@ -1,211 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/OLIMEX_STM32_P103/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F1xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F1xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F103xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - $(CHIBIOS)/os/various/syscalls.c \ - $(CHIBIOS)/os/various/chrtclib.c \ - main.c \ - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. - -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F1xx/RTC/chconf.h b/testhal/STM32F1xx/RTC/chconf.h deleted file mode 100644 index c1dec4b48..000000000 --- a/testhal/STM32F1xx/RTC/chconf.h +++ /dev/null @@ -1,505 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/* Kernel parameters. */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 0//20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/*===========================================================================*/ -/* Performance options. */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED FALSE -#endif - -/*===========================================================================*/ -/* Subsystem options. */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS FALSE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT FALSE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP FALSE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC FALSE -#endif - -/*===========================================================================*/ -/* Debug options. */ -/*===========================================================================*/ -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE FALSE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/*===========================================================================*/ -/* Kernel hooks. */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/RTC/halconf.h b/testhal/STM32F1xx/RTC/halconf.h deleted file mode 100644 index 388e9a080..000000000 --- a/testhal/STM32F1xx/RTC/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC TRUE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/RTC/main.c b/testhal/STM32F1xx/RTC/main.c deleted file mode 100644 index 1d43b33ad..000000000 --- a/testhal/STM32F1xx/RTC/main.c +++ /dev/null @@ -1,118 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#include "chrtclib.h" - -RTCTime timespec; -RTCAlarm alarmspec; - -#define TEST_ALARM_WAKEUP FALSE - - -#if TEST_ALARM_WAKEUP - -/* sleep indicator thread */ -static WORKING_AREA(blinkWA, 128); -static msg_t blink_thd(void *arg){ - (void)arg; - while (TRUE) { - chThdSleepMilliseconds(100); - palTogglePad(GPIOC, GPIOC_LED); - } - return 0; -} - -int main(void) { - halInit(); - chSysInit(); - - chThdCreateStatic(blinkWA, sizeof(blinkWA), NORMALPRIO, blink_thd, NULL); - /* set alarm in near future */ - rtcGetTime(&RTCD1, ×pec); - alarmspec.tv_sec = timespec.tv_sec + 30; - rtcSetAlarm(&RTCD1, 0, &alarmspec); - - while (TRUE){ - chThdSleepSeconds(10); - chSysLock(); - - /* going to anabiosis*/ - PWR->CR |= (PWR_CR_PDDS | PWR_CR_LPDS | PWR_CR_CSBF | PWR_CR_CWUF); - SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk; - __WFI(); - } - return 0; -} - -#else /* TEST_ALARM_WAKEUP */ - -/* Manually reloaded test alarm period.*/ -#define RTC_ALARMPERIOD 10 - -BinarySemaphore alarm_sem; - -static void my_cb(RTCDriver *rtcp, rtcevent_t event) { - - (void)rtcp; - - switch (event) { - case RTC_EVENT_OVERFLOW: - palTogglePad(GPIOC, GPIOC_LED); - break; - case RTC_EVENT_SECOND: - /* palTogglePad(GPIOC, GPIOC_LED); */ - break; - case RTC_EVENT_ALARM: - palTogglePad(GPIOC, GPIOC_LED); - chSysLockFromIsr(); - chBSemSignalI(&alarm_sem); - chSysUnlockFromIsr(); - break; - } -} - -int main(void) { - msg_t status = RDY_TIMEOUT; - - halInit(); - chSysInit(); - chBSemInit(&alarm_sem, TRUE); - - rtcGetTime(&RTCD1, ×pec); - alarmspec.tv_sec = timespec.tv_sec + RTC_ALARMPERIOD; - rtcSetAlarm(&RTCD1, 0, &alarmspec); - - rtcSetCallback(&RTCD1, my_cb); - while (TRUE){ - - /* Wait until alarm callback signaled semaphore.*/ - status = chBSemWaitTimeout(&alarm_sem, S2ST(RTC_ALARMPERIOD + 5)); - - if (status == RDY_TIMEOUT){ - chSysHalt(); - } - else{ - rtcGetTime(&RTCD1, ×pec); - alarmspec.tv_sec = timespec.tv_sec + RTC_ALARMPERIOD; - rtcSetAlarm(&RTCD1, 0, &alarmspec); - } - } - return 0; -} -#endif /* TEST_ALARM_WAKEUP */ diff --git a/testhal/STM32F1xx/RTC/mcuconf.h b/testhal/STM32F1xx/RTC/mcuconf.h deleted file mode 100644 index 589b599d4..000000000 --- a/testhal/STM32F1xx/RTC/mcuconf.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_LSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - diff --git a/testhal/STM32F1xx/RTC_FATTIME/Makefile b/testhal/STM32F1xx/RTC_FATTIME/Makefile deleted file mode 100644 index 347169ba9..000000000 --- a/testhal/STM32F1xx/RTC_FATTIME/Makefile +++ /dev/null @@ -1,213 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/OLIMEX_STM32_103STK/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F1xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F1xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -include $(CHIBIOS)/os/various/fatfs_bindings/fatfs.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F103xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(FATFSSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - $(CHIBIOS)/os/various/syscalls.c \ - $(CHIBIOS)/os/various/shell.c \ - $(CHIBIOS)/os/various/chprintf.c \ - $(CHIBIOS)/os/various/chrtclib.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various $(FATFSINC) - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F1xx/RTC_FATTIME/chconf.h b/testhal/STM32F1xx/RTC_FATTIME/chconf.h deleted file mode 100644 index f29e139f7..000000000 --- a/testhal/STM32F1xx/RTC_FATTIME/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE FALSE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/RTC_FATTIME/ffconf.h b/testhal/STM32F1xx/RTC_FATTIME/ffconf.h deleted file mode 100644 index a4816e845..000000000 --- a/testhal/STM32F1xx/RTC_FATTIME/ffconf.h +++ /dev/null @@ -1,193 +0,0 @@ -/* CHIBIOS FIX */ -#include "ch.h" - -/*---------------------------------------------------------------------------/ -/ FatFs - FAT file system module configuration file R0.09 (C)ChaN, 2011 -/----------------------------------------------------------------------------/ -/ -/ CAUTION! Do not forget to make clean the project after any changes to -/ the configuration options. -/ -/----------------------------------------------------------------------------*/ -#ifndef _FFCONF -#define _FFCONF 6502 /* Revision ID */ - - -/*---------------------------------------------------------------------------/ -/ Functions and Buffer Configurations -/----------------------------------------------------------------------------*/ - -#define _FS_TINY 0 /* 0:Normal or 1:Tiny */ -/* When _FS_TINY is set to 1, FatFs uses the sector buffer in the file system -/ object instead of the sector buffer in the individual file object for file -/ data transfer. This reduces memory consumption 512 bytes each file object. */ - - -#define _FS_READONLY 0 /* 0:Read/Write or 1:Read only */ -/* Setting _FS_READONLY to 1 defines read only configuration. This removes -/ writing functions, f_write, f_sync, f_unlink, f_mkdir, f_chmod, f_rename, -/ f_truncate and useless f_getfree. */ - - -#define _FS_MINIMIZE 0 /* 0 to 3 */ -/* The _FS_MINIMIZE option defines minimization level to remove some functions. -/ -/ 0: Full function. -/ 1: f_stat, f_getfree, f_unlink, f_mkdir, f_chmod, f_truncate and f_rename -/ are removed. -/ 2: f_opendir and f_readdir are removed in addition to 1. -/ 3: f_lseek is removed in addition to 2. */ - - -#define _USE_STRFUNC 0 /* 0:Disable or 1-2:Enable */ -/* To enable string functions, set _USE_STRFUNC to 1 or 2. */ - - -#define _USE_MKFS 1 /* 0:Disable or 1:Enable */ -/* To enable f_mkfs function, set _USE_MKFS to 1 and set _FS_READONLY to 0 */ - - -#define _USE_FORWARD 0 /* 0:Disable or 1:Enable */ -/* To enable f_forward function, set _USE_FORWARD to 1 and set _FS_TINY to 1. */ - - -#define _USE_FASTSEEK 0 /* 0:Disable or 1:Enable */ -/* To enable fast seek feature, set _USE_FASTSEEK to 1. */ - - - -/*---------------------------------------------------------------------------/ -/ Locale and Namespace Configurations -/----------------------------------------------------------------------------*/ - -#define _CODE_PAGE 1251 -/* The _CODE_PAGE specifies the OEM code page to be used on the target system. -/ Incorrect setting of the code page can cause a file open failure. -/ -/ 932 - Japanese Shift-JIS (DBCS, OEM, Windows) -/ 936 - Simplified Chinese GBK (DBCS, OEM, Windows) -/ 949 - Korean (DBCS, OEM, Windows) -/ 950 - Traditional Chinese Big5 (DBCS, OEM, Windows) -/ 1250 - Central Europe (Windows) -/ 1251 - Cyrillic (Windows) -/ 1252 - Latin 1 (Windows) -/ 1253 - Greek (Windows) -/ 1254 - Turkish (Windows) -/ 1255 - Hebrew (Windows) -/ 1256 - Arabic (Windows) -/ 1257 - Baltic (Windows) -/ 1258 - Vietnam (OEM, Windows) -/ 437 - U.S. (OEM) -/ 720 - Arabic (OEM) -/ 737 - Greek (OEM) -/ 775 - Baltic (OEM) -/ 850 - Multilingual Latin 1 (OEM) -/ 858 - Multilingual Latin 1 + Euro (OEM) -/ 852 - Latin 2 (OEM) -/ 855 - Cyrillic (OEM) -/ 866 - Russian (OEM) -/ 857 - Turkish (OEM) -/ 862 - Hebrew (OEM) -/ 874 - Thai (OEM, Windows) -/ 1 - ASCII only (Valid for non LFN cfg.) -*/ - - -#define _USE_LFN 1 /* 0 to 3 */ -#define _MAX_LFN 255 /* Maximum LFN length to handle (12 to 255) */ -/* The _USE_LFN option switches the LFN support. -/ -/ 0: Disable LFN feature. _MAX_LFN and _LFN_UNICODE have no effect. -/ 1: Enable LFN with static working buffer on the BSS. Always NOT reentrant. -/ 2: Enable LFN with dynamic working buffer on the STACK. -/ 3: Enable LFN with dynamic working buffer on the HEAP. -/ -/ The LFN working buffer occupies (_MAX_LFN + 1) * 2 bytes. To enable LFN, -/ Unicode handling functions ff_convert() and ff_wtoupper() must be added -/ to the project. When enable to use heap, memory control functions -/ ff_memalloc() and ff_memfree() must be added to the project. */ - - -#define _LFN_UNICODE 0 /* 0:ANSI/OEM or 1:Unicode */ -/* To switch the character code set on FatFs API to Unicode, -/ enable LFN feature and set _LFN_UNICODE to 1. */ - - -#define _FS_RPATH 0 /* 0 to 2 */ -/* The _FS_RPATH option configures relative path feature. -/ -/ 0: Disable relative path feature and remove related functions. -/ 1: Enable relative path. f_chdrive() and f_chdir() are available. -/ 2: f_getcwd() is available in addition to 1. -/ -/ Note that output of the f_readdir fnction is affected by this option. */ - - - -/*---------------------------------------------------------------------------/ -/ Physical Drive Configurations -/----------------------------------------------------------------------------*/ - -#define _VOLUMES 1 -/* Number of volumes (logical drives) to be used. */ - - -#define _MAX_SS 512 /* 512, 1024, 2048 or 4096 */ -/* Maximum sector size to be handled. -/ Always set 512 for memory card and hard disk but a larger value may be -/ required for on-board flash memory, floppy disk and optical disk. -/ When _MAX_SS is larger than 512, it configures FatFs to variable sector size -/ and GET_SECTOR_SIZE command must be implememted to the disk_ioctl function. */ - - -#define _MULTI_PARTITION 0 /* 0:Single partition, 1/2:Enable multiple partition */ -/* When set to 0, each volume is bound to the same physical drive number and -/ it can mount only first primaly partition. When it is set to 1, each volume -/ is tied to the partitions listed in VolToPart[]. */ - - -#define _USE_ERASE 1 /* 0:Disable or 1:Enable */ -/* To enable sector erase feature, set _USE_ERASE to 1. CTRL_ERASE_SECTOR command -/ should be added to the disk_ioctl functio. */ - - - -/*---------------------------------------------------------------------------/ -/ System Configurations -/----------------------------------------------------------------------------*/ - -#define _WORD_ACCESS 1 /* 0 or 1 */ -/* Set 0 first and it is always compatible with all platforms. The _WORD_ACCESS -/ option defines which access method is used to the word data on the FAT volume. -/ -/ 0: Byte-by-byte access. -/ 1: Word access. Do not choose this unless following condition is met. -/ -/ When the byte order on the memory is big-endian or address miss-aligned word -/ access results incorrect behavior, the _WORD_ACCESS must be set to 0. -/ If it is not the case, the value can also be set to 1 to improve the -/ performance and code size. -*/ - - -/* A header file that defines sync object types on the O/S, such as -/ windows.h, ucos_ii.h and semphr.h, must be included prior to ff.h. */ - -#define _FS_REENTRANT 0 /* 0:Disable or 1:Enable */ -#define _FS_TIMEOUT 1000 /* Timeout period in unit of time ticks */ -#define _SYNC_t Semaphore * /* O/S dependent type of sync object. e.g. HANDLE, OS_EVENT*, ID and etc.. */ - -/* The _FS_REENTRANT option switches the reentrancy (thread safe) of the FatFs module. -/ -/ 0: Disable reentrancy. _SYNC_t and _FS_TIMEOUT have no effect. -/ 1: Enable reentrancy. Also user provided synchronization handlers, -/ ff_req_grant, ff_rel_grant, ff_del_syncobj and ff_cre_syncobj -/ function must be added to the project. */ - - -#define _FS_SHARE 0 /* 0:Disable or >=1:Enable */ -/* To enable file shareing feature, set _FS_SHARE to 1 or greater. The value - defines how many files can be opened simultaneously. */ - - -#endif /* _FFCONFIG */ diff --git a/testhal/STM32F1xx/RTC_FATTIME/halconf.h b/testhal/STM32F1xx/RTC_FATTIME/halconf.h deleted file mode 100644 index 54be7f5e8..000000000 --- a/testhal/STM32F1xx/RTC_FATTIME/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI TRUE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC TRUE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/RTC_FATTIME/main.c b/testhal/STM32F1xx/RTC_FATTIME/main.c deleted file mode 100644 index c229830d0..000000000 --- a/testhal/STM32F1xx/RTC_FATTIME/main.c +++ /dev/null @@ -1,570 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include -#include -#include - -#include "ch.h" -#include "hal.h" - -#include "usb_cdc.h" -#include "shell.h" -#include "chprintf.h" -#include "chrtclib.h" -#include "ff.h" - -/*===========================================================================*/ -/* USB related stuff. */ -/*===========================================================================*/ - -/* - * Endpoints to be used for USBD1. - */ -#define USBD1_DATA_REQUEST_EP 1 -#define USBD1_DATA_AVAILABLE_EP 1 -#define USBD1_INTERRUPT_REQUEST_EP 2 - -/* - * Serial over USB Driver structure. - */ -static SerialUSBDriver SDU1; - -/* - * USB Device Descriptor. - */ -static const uint8_t vcom_device_descriptor_data[18] = { - USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ - 0x02, /* bDeviceClass (CDC). */ - 0x00, /* bDeviceSubClass. */ - 0x00, /* bDeviceProtocol. */ - 0x40, /* bMaxPacketSize. */ - 0x0483, /* idVendor (ST). */ - 0x5740, /* idProduct. */ - 0x0200, /* bcdDevice. */ - 1, /* iManufacturer. */ - 2, /* iProduct. */ - 3, /* iSerialNumber. */ - 1) /* bNumConfigurations. */ -}; - -/* - * Device Descriptor wrapper. - */ -static const USBDescriptor vcom_device_descriptor = { - sizeof vcom_device_descriptor_data, - vcom_device_descriptor_data -}; - -/* Configuration Descriptor tree for a CDC.*/ -static const uint8_t vcom_configuration_descriptor_data[67] = { - /* Configuration Descriptor.*/ - USB_DESC_CONFIGURATION(67, /* wTotalLength. */ - 0x02, /* bNumInterfaces. */ - 0x01, /* bConfigurationValue. */ - 0, /* iConfiguration. */ - 0xC0, /* bmAttributes (self powered). */ - 50), /* bMaxPower (100mA). */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x01, /* bNumEndpoints. */ - 0x02, /* bInterfaceClass (Communications - Interface Class, CDC section - 4.2). */ - 0x02, /* bInterfaceSubClass (Abstract - Control Model, CDC section 4.3). */ - 0x01, /* bInterfaceProtocol (AT commands, - CDC section 4.4). */ - 0), /* iInterface. */ - /* Header Functional Descriptor (CDC section 5.2.3).*/ - USB_DESC_BYTE (5), /* bLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header - Functional Descriptor. */ - USB_DESC_BCD (0x0110), /* bcdCDC. */ - /* Call Management Functional Descriptor. */ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */ - USB_DESC_BYTE (0x01), /* bDataInterface. */ - /* ACM Functional Descriptor.*/ - USB_DESC_BYTE (4), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract - Control Management Descriptor). */ - USB_DESC_BYTE (0x02), /* bmCapabilities. */ - /* Union Functional Descriptor.*/ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bMasterInterface (Communication - Class Interface). */ - USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class - Interface). */ - /* Endpoint 2 Descriptor.*/ - USB_DESC_ENDPOINT (USB_CDC_INTERRUPT_REQUEST_EP|0x80, - 0x03, /* bmAttributes (Interrupt). */ - 0x0008, /* wMaxPacketSize. */ - 0xFF), /* bInterval. */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x02, /* bNumEndpoints. */ - 0x0A, /* bInterfaceClass (Data Class - Interface, CDC section 4.5). */ - 0x00, /* bInterfaceSubClass (CDC section - 4.6). */ - 0x00, /* bInterfaceProtocol (CDC section - 4.7). */ - 0x00), /* iInterface. */ - /* Endpoint 3 Descriptor.*/ - USB_DESC_ENDPOINT (USB_CDC_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00), /* bInterval. */ - /* Endpoint 1 Descriptor.*/ - USB_DESC_ENDPOINT (USB_CDC_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00) /* bInterval. */ -}; - -/* - * Configuration Descriptor wrapper. - */ -static const USBDescriptor vcom_configuration_descriptor = { - sizeof vcom_configuration_descriptor_data, - vcom_configuration_descriptor_data -}; - -/* - * U.S. English language identifier. - */ -static const uint8_t vcom_string0[] = { - USB_DESC_BYTE(4), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ -}; - -/* - * Vendor string. - */ -static const uint8_t vcom_string1[] = { - USB_DESC_BYTE(38), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0, - 'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0, - 'c', 0, 's', 0 -}; - -/* - * Device Description string. - */ -static const uint8_t vcom_string2[] = { - USB_DESC_BYTE(56), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0, - 'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0, - 'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0, - 'o', 0, 'r', 0, 't', 0 -}; - -/* - * Serial Number string. - */ -static const uint8_t vcom_string3[] = { - USB_DESC_BYTE(8), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - '0' + CH_KERNEL_MAJOR, 0, - '0' + CH_KERNEL_MINOR, 0, - '0' + CH_KERNEL_PATCH, 0 -}; - -/* - * Strings wrappers array. - */ -static const USBDescriptor vcom_strings[] = { - {sizeof vcom_string0, vcom_string0}, - {sizeof vcom_string1, vcom_string1}, - {sizeof vcom_string2, vcom_string2}, - {sizeof vcom_string3, vcom_string3} -}; - -/* - * Handles the GET_DESCRIPTOR callback. All required descriptors must be - * handled here. - */ -static const USBDescriptor *get_descriptor(USBDriver *usbp, - uint8_t dtype, - uint8_t dindex, - uint16_t lang) { - - (void)usbp; - (void)lang; - switch (dtype) { - case USB_DESCRIPTOR_DEVICE: - return &vcom_device_descriptor; - case USB_DESCRIPTOR_CONFIGURATION: - return &vcom_configuration_descriptor; - case USB_DESCRIPTOR_STRING: - if (dindex < 4) - return &vcom_strings[dindex]; - } - return NULL; -} - -/** - * @brief IN EP1 state. - */ -static USBInEndpointState ep1instate; - -/** - * @brief OUT EP1 state. - */ -static USBOutEndpointState ep1outstate; - -/** - * @brief EP1 initialization structure (both IN and OUT). - */ -static const USBEndpointConfig ep1config = { - USB_EP_MODE_TYPE_BULK, - NULL, - sduDataTransmitted, - sduDataReceived, - 0x0040, - 0x0040, - &ep1instate, - &ep1outstate, - 1, - NULL -}; - -/** - * @brief IN EP2 state. - */ -static USBInEndpointState ep2instate; - -/** - * @brief EP2 initialization structure (IN only). - */ -static const USBEndpointConfig ep2config = { - USB_EP_MODE_TYPE_INTR, - NULL, - sduInterruptTransmitted, - NULL, - 0x0010, - 0x0000, - &ep2instate, - NULL, - 1, - NULL -}; - -/* - * Handles the USB driver global events. - */ -static void usb_event(USBDriver *usbp, usbevent_t event) { - - switch (event) { - case USB_EVENT_RESET: - return; - case USB_EVENT_ADDRESS: - return; - case USB_EVENT_CONFIGURED: - chSysLockFromIsr(); - - /* Enables the endpoints specified into the configuration. - Note, this callback is invoked from an ISR so I-Class functions - must be used.*/ - usbInitEndpointI(usbp, USB_CDC_DATA_REQUEST_EP, &ep1config); - usbInitEndpointI(usbp, USB_CDC_INTERRUPT_REQUEST_EP, &ep2config); - - /* Resetting the state of the CDC subsystem.*/ - sduConfigureHookI(&SDU1); - - chSysUnlockFromIsr(); - return; - case USB_EVENT_SUSPEND: - return; - case USB_EVENT_WAKEUP: - return; - case USB_EVENT_STALLED: - return; - } - return; -} - -/* - * USB driver configuration. - */ -static const USBConfig usbcfg = { - usb_event, - get_descriptor, - sduRequestsHook, - NULL -}; - -/* - * Serial over USB driver configuration. - */ -static const SerialUSBConfig serusbcfg = { - &USBD1, - USBD1_DATA_REQUEST_EP, - USBD1_DATA_AVAILABLE_EP, - USBD1_INTERRUPT_REQUEST_EP -}; - -/** - * @brief FS object. - */ -FATFS MMC_FS; - -/** - * MMC driver instance. - */ -MMCDriver MMCD1; - -/* FS mounted and ready.*/ -static bool_t fs_ready = FALSE; - -/* Maximum speed SPI configuration (18MHz, CPHA=0, CPOL=0, MSb first).*/ -static SPIConfig hs_spicfg = {NULL, IOPORT2, GPIOB_SPI2NSS, 0}; - -/* Low speed SPI configuration (281.250kHz, CPHA=0, CPOL=0, MSb first).*/ -static SPIConfig ls_spicfg = {NULL, IOPORT2, GPIOB_SPI2NSS, - SPI_CR1_BR_2 | SPI_CR1_BR_1}; - -/* MMC/SD over SPI driver configuration.*/ -static MMCConfig mmccfg = {&SPID2, &ls_spicfg, &hs_spicfg}; - -/** - * - */ -bool_t mmc_lld_is_write_protected(MMCDriver *sdcp) { - (void)sdcp; - return FALSE; -} - -/** - * - */ -bool_t mmc_lld_is_card_inserted(MMCDriver *sdcp) { - (void)sdcp; - return !palReadPad(GPIOC, GPIOC_MMCCP); -} - -/** - * - */ -void cmd_sdiotest(BaseSequentialStream *chp, int argc, char *argv[]){ - (void)argc; - (void)argv; - FRESULT err; - uint32_t clusters; - FATFS *fsp; - FIL FileObject; - //FILINFO FileInfo; - size_t bytes_written; - struct tm timp; - - // set time to 2011-03-13 07:06:40 - //rtcSetTimeUnixSec(&RTCD1, 1300000000); - -#if !HAL_USE_RTC - chprintf(chp, "ERROR! Chibios compiled without RTC support."); - chprintf(chp, "Enable HAL_USE_RCT in you halconf.h"); - chThdSleepMilliseconds(100); - return; -#endif - - chprintf(chp, "Trying to connect SDIO... "); - chThdSleepMilliseconds(100); - - if (!mmcConnect(&MMCD1)) { - chprintf(chp, "OK\r\n"); - chprintf(chp, "Register working area for filesystem... "); - chThdSleepMilliseconds(100); - err = f_mount(0, &MMC_FS); - if (err != FR_OK){ - chSysHalt(); - } - else{ - fs_ready = TRUE; - chprintf(chp, "OK\r\n"); - } - - chprintf(chp, "Mounting filesystem... "); - chThdSleepMilliseconds(100); - err = f_getfree("/", &clusters, &fsp); - if (err != FR_OK) { - chSysHalt(); - } - chprintf(chp, "OK\r\n"); - chprintf(chp, - "FS: %lu free clusters, %lu sectors per cluster, %lu bytes free\r\n", - clusters, (uint32_t)MMC_FS.csize, - clusters * (uint32_t)MMC_FS.csize * (uint32_t)MMCSD_BLOCK_SIZE); - - rtcGetTimeTm(&RTCD1, &timp); - chprintf(chp, "Current RTC time is: "); - chprintf(chp, "%u-%u-%u %u:%u:%u\r\n", - timp.tm_year+1900, timp.tm_mon+1, timp.tm_mday, timp.tm_hour, timp.tm_min, - timp.tm_sec); - - chprintf(chp, "Creating empty file 'tmstmp.tst'... "); - chThdSleepMilliseconds(100); - err = f_open(&FileObject, "0:tmstmp.tst", FA_WRITE | FA_OPEN_ALWAYS); - if (err != FR_OK) { - chSysHalt(); - } - chprintf(chp, "OK\r\n"); - - chprintf(chp, "Write some data in it... "); - chThdSleepMilliseconds(100); - err = f_write(&FileObject, "tst", sizeof("tst"), (void *)&bytes_written); - if (err != FR_OK) { - chSysHalt(); - } - else - chprintf(chp, "OK\r\n"); - - chprintf(chp, "Closing file 'tmstmp.tst'... "); - chThdSleepMilliseconds(100); - err = f_close(&FileObject); - if (err != FR_OK) { - chSysHalt(); - } - else - chprintf(chp, "OK\r\n"); - -// chprintf(chp, "Obtaining file info ... "); -// chThdSleepMilliseconds(100); -// err = f_stat("0:tmstmp.tst", &FileInfo); -// if (err != FR_OK) { -// chSysHalt(); -// } -// else{ -// chprintf(chp, "OK\r\n"); -// chprintf(chp, " Timestamp: %u-%u-%u %u:%u:%u\r\n", -// ((FileInfo.fdate >> 9) & 127) + 1980, -// (FileInfo.fdate >> 5) & 15, -// FileInfo.fdate & 31, -// (FileInfo.ftime >> 11) & 31, -// (FileInfo.ftime >> 5) & 63, -// (FileInfo.ftime & 31) * 2); -// } - - chprintf(chp, "Umounting filesystem... "); - f_mount(0, NULL); - chprintf(chp, "OK\r\n"); - - chprintf(chp, "Disconnecting from SDIO..."); - chThdSleepMilliseconds(100); - if (mmcDisconnect(&MMCD1)) - chSysHalt(); - chprintf(chp, " OK\r\n"); - chprintf(chp, "------------------------------------------------------\r\n"); - chprintf(chp, "Now you can remove memory card and check timestamp on PC.\r\n"); - chThdSleepMilliseconds(100); - } - else{ - chSysHalt(); - } -} - -/*===========================================================================*/ -/* Command line related. */ -/*===========================================================================*/ - -#define SHELL_WA_SIZE THD_WA_SIZE(2048) - -static const ShellCommand commands[] = { - {"sdiotest", cmd_sdiotest}, - {NULL, NULL} -}; - -static const ShellConfig shell_cfg1 = { - (BaseSequentialStream *)&SDU1, - commands -}; - -/*===========================================================================*/ -/* Generic code. */ -/*===========================================================================*/ - -/* - * Application entry point. - */ -int main(void) { - Thread *shelltp = NULL; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes a serial-over-USB CDC driver. - */ - sduObjectInit(&SDU1); - sduStart(&SDU1, &serusbcfg); - - /* - * Activates the USB driver and then the USB bus pull-up on D+. - * Note, a delay is inserted in order to not have to disconnect the cable - * after a reset. - */ - usbDisconnectBus(serusbcfg.usbp); - chThdSleepMilliseconds(1000); - usbStart(serusbcfg.usbp, &usbcfg); - usbConnectBus(serusbcfg.usbp); - chThdSleepMilliseconds(100); - - /* - * Shell manager initialization. - */ - shellInit(); - - /* - * Initializes the SDIO drivers. - */ - mmcObjectInit(&MMCD1); - mmcStart(&MMCD1, &mmccfg); - - /* - * Normal main() thread activity, in this demo it does nothing except - * sleeping in a loop and check the button state. - */ - while (TRUE) { - if (!shelltp && (SDU1.config->usbp->state == USB_ACTIVE)) - shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO); - else if (chThdTerminated(shelltp)) { - chThdRelease(shelltp); /* Recovers memory of the previous shell. */ - shelltp = NULL; /* Triggers spawning of a new shell. */ - } - chThdSleepMilliseconds(1000); -} - -} diff --git a/testhal/STM32F1xx/RTC_FATTIME/mcuconf.h b/testhal/STM32F1xx/RTC_FATTIME/mcuconf.h deleted file mode 100644 index 6c437d356..000000000 --- a/testhal/STM32F1xx/RTC_FATTIME/mcuconf.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - diff --git a/testhal/STM32F1xx/RTC_FATTIME/readme.txt b/testhal/STM32F1xx/RTC_FATTIME/readme.txt deleted file mode 100644 index 0d7b112ee..000000000 --- a/testhal/STM32F1xx/RTC_FATTIME/readme.txt +++ /dev/null @@ -1,26 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - USB-CDC driver demo for STM32. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Olimex STM32-P103 board. - -** The Demo ** - -The application demonstrates checks timestamp correctness on FAT. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F1xx/SDC/Makefile b/testhal/STM32F1xx/SDC/Makefile deleted file mode 100644 index 4e25ee845..000000000 --- a/testhal/STM32F1xx/SDC/Makefile +++ /dev/null @@ -1,212 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Define linker script file here -LDSCRIPT= ch.ld - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM3210E_EVAL/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F1xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F1xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F103xE.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - $(CHIBIOS)/os/various/syscalls.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F1xx/SDC/chconf.h b/testhal/STM32F1xx/SDC/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F1xx/SDC/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/SDC/halconf.h b/testhal/STM32F1xx/SDC/halconf.h deleted file mode 100644 index 3f22f8d9c..000000000 --- a/testhal/STM32F1xx/SDC/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC TRUE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/SDC/main.c b/testhal/STM32F1xx/SDC/main.c deleted file mode 100644 index 24a8d4346..000000000 --- a/testhal/STM32F1xx/SDC/main.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * SDIO configuration. - */ -static const SDCConfig sdccfg = { - 0 -}; - -static uint8_t blkbuf[MMCSD_BLOCK_SIZE * 4 + 1]; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes the SDIO drivers. - */ - sdcStart(&SDCD1, &sdccfg); - if (!sdcConnect(&SDCD1)) { - int i; - - /* Single aligned read.*/ - if (sdcRead(&SDCD1, 0, blkbuf, 1)) - chSysHalt(); - - /* Single unaligned read.*/ - if (sdcRead(&SDCD1, 0, blkbuf + 1, 1)) - chSysHalt(); - - /* Multiple aligned read.*/ - if (sdcRead(&SDCD1, 0, blkbuf, 4)) - chSysHalt(); - - /* Multiple unaligned read.*/ - if (sdcRead(&SDCD1, 0, blkbuf + 1, 4)) - chSysHalt(); - - /* Repeated multiple aligned reads.*/ - for (i = 0; i < 1000; i++) { - if (sdcRead(&SDCD1, 0, blkbuf, 4)) - chSysHalt(); - } - - /* Repeated multiple unaligned reads.*/ - for (i = 0; i < 1000; i++) { - if (sdcRead(&SDCD1, 0, blkbuf + 1, 4)) - chSysHalt(); - } - - /* Repeated multiple aligned writes.*/ - for (i = 0; i < 100; i++) { - if (sdcRead(&SDCD1, 0x10000, blkbuf, 4)) - chSysHalt(); - if (sdcWrite(&SDCD1, 0x10000, blkbuf, 4)) - chSysHalt(); - if (sdcWrite(&SDCD1, 0x10000, blkbuf, 4)) - chSysHalt(); - } - - /* Repeated multiple unaligned writes.*/ - for (i = 0; i < 100; i++) { - if (sdcRead(&SDCD1, 0x10000, blkbuf + 1, 4)) - chSysHalt(); - if (sdcWrite(&SDCD1, 0x10000, blkbuf + 1, 4)) - chSysHalt(); - if (sdcWrite(&SDCD1, 0x10000, blkbuf + 1, 4)) - chSysHalt(); - } - - if (sdcDisconnect(&SDCD1)) - chSysHalt(); - } - - /* - * Normal main() thread activity. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } -} diff --git a/testhal/STM32F1xx/SDC/mcuconf.h b/testhal/STM32F1xx/SDC/mcuconf.h deleted file mode 100644 index b506af317..000000000 --- a/testhal/STM32F1xx/SDC/mcuconf.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - diff --git a/testhal/STM32F1xx/SDC/readme.txt b/testhal/STM32F1xx/SDC/readme.txt deleted file mode 100644 index b897676af..000000000 --- a/testhal/STM32F1xx/SDC/readme.txt +++ /dev/null @@ -1,26 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - SDC driver demo for STM32. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Olimex ST_STM3210E_EVAL board. - -** The Demo ** - -The application demonstrates the use of the STM32 SDC driver. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F1xx/SPI/Makefile b/testhal/STM32F1xx/SPI/Makefile deleted file mode 100644 index 0f7e20317..000000000 --- a/testhal/STM32F1xx/SPI/Makefile +++ /dev/null @@ -1,209 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/OLIMEX_STM32_P103/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F1xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F1xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F103xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - $(CHIBIOS)/os/various/syscalls.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F1xx/SPI/chconf.h b/testhal/STM32F1xx/SPI/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F1xx/SPI/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/SPI/halconf.h b/testhal/STM32F1xx/SPI/halconf.h deleted file mode 100644 index 3e1cafbbf..000000000 --- a/testhal/STM32F1xx/SPI/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/SPI/main.c b/testhal/STM32F1xx/SPI/main.c deleted file mode 100644 index 35b7c3b42..000000000 --- a/testhal/STM32F1xx/SPI/main.c +++ /dev/null @@ -1,134 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * Maximum speed SPI configuration (18MHz, CPHA=0, CPOL=0, MSb first). - */ -static const SPIConfig hs_spicfg = { - NULL, - GPIOA, - GPIOA_SPI1NSS, - 0 -}; - -/* - * Low speed SPI configuration (281.250kHz, CPHA=0, CPOL=0, MSb first). - */ -static const SPIConfig ls_spicfg = { - NULL, - GPIOA, - GPIOA_SPI1NSS, - SPI_CR1_BR_2 | SPI_CR1_BR_1 -}; - -/* - * SPI TX and RX buffers. - */ -static uint8_t txbuf[512]; -static uint8_t rxbuf[512]; - -/* - * SPI bus contender 1. - */ -static WORKING_AREA(spi_thread_1_wa, 256); -static msg_t spi_thread_1(void *p) { - - (void)p; - chRegSetThreadName("SPI thread 1"); - while (TRUE) { - spiAcquireBus(&SPID1); /* Acquire ownership of the bus. */ - palClearPad(IOPORT3, GPIOC_LED); /* LED ON. */ - spiStart(&SPID1, &hs_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID1); /* Slave Select assertion. */ - spiExchange(&SPID1, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID1); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID1); /* Ownership release. */ - } - return 0; -} - -/* - * SPI bus contender 2. - */ -static WORKING_AREA(spi_thread_2_wa, 256); -static msg_t spi_thread_2(void *p) { - - (void)p; - chRegSetThreadName("SPI thread 2"); - while (TRUE) { - spiAcquireBus(&SPID1); /* Acquire ownership of the bus. */ - palSetPad(IOPORT3, GPIOC_LED); /* LED OFF. */ - spiStart(&SPID1, &ls_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID1); /* Slave Select assertion. */ - spiExchange(&SPID1, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID1); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID1); /* Ownership release. */ - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * SPI1 I/O pins setup. - */ - palSetPadMode(IOPORT1, 5, PAL_MODE_STM32_ALTERNATE_PUSHPULL); /* SCK. */ - palSetPadMode(IOPORT1, 6, PAL_MODE_STM32_ALTERNATE_PUSHPULL); /* MISO.*/ - palSetPadMode(IOPORT1, 7, PAL_MODE_STM32_ALTERNATE_PUSHPULL); /* MOSI.*/ - palSetPadMode(IOPORT1, GPIOA_SPI1NSS, PAL_MODE_OUTPUT_PUSHPULL); - palSetPad(IOPORT1, GPIOA_SPI1NSS); - - /* - * Prepare transmit pattern. - */ - for (i = 0; i < sizeof(txbuf); i++) - txbuf[i] = (uint8_t)i; - - /* - * Starting the transmitter and receiver threads. - */ - chThdCreateStatic(spi_thread_1_wa, sizeof(spi_thread_1_wa), - NORMALPRIO + 1, spi_thread_1, NULL); - chThdCreateStatic(spi_thread_2_wa, sizeof(spi_thread_2_wa), - NORMALPRIO + 1, spi_thread_2, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F1xx/SPI/mcuconf.h b/testhal/STM32F1xx/SPI/mcuconf.h deleted file mode 100644 index c74814336..000000000 --- a/testhal/STM32F1xx/SPI/mcuconf.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - diff --git a/testhal/STM32F1xx/SPI/readme.txt b/testhal/STM32F1xx/SPI/readme.txt deleted file mode 100644 index 1a9c90b47..000000000 --- a/testhal/STM32F1xx/SPI/readme.txt +++ /dev/null @@ -1,26 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - SPI driver demo for STM32. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Olimex STM32-P103 board. - -** The Demo ** - -The application demonstrates the use of the STM32 SPI driver. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F1xx/UART/Makefile b/testhal/STM32F1xx/UART/Makefile deleted file mode 100644 index 0f7e20317..000000000 --- a/testhal/STM32F1xx/UART/Makefile +++ /dev/null @@ -1,209 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/OLIMEX_STM32_P103/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F1xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F1xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F103xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - $(CHIBIOS)/os/various/syscalls.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F1xx/UART/chconf.h b/testhal/STM32F1xx/UART/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F1xx/UART/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/UART/halconf.h b/testhal/STM32F1xx/UART/halconf.h deleted file mode 100644 index 520e71b0a..000000000 --- a/testhal/STM32F1xx/UART/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART TRUE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/UART/main.c b/testhal/STM32F1xx/UART/main.c deleted file mode 100644 index 5682b8029..000000000 --- a/testhal/STM32F1xx/UART/main.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static VirtualTimer vt1, vt2; - -static void restart(void *p) { - - (void)p; - - chSysLockFromIsr(); - uartStartSendI(&UARTD2, 14, "Hello World!\r\n"); - chSysUnlockFromIsr(); -} - -static void ledoff(void *p) { - - (void)p; - palSetPad(IOPORT3, GPIOC_LED); -} - -/* - * This callback is invoked when a transmission buffer has been completely - * read by the driver. - */ -static void txend1(UARTDriver *uartp) { - - (void)uartp; - palClearPad(IOPORT3, GPIOC_LED); -} - -/* - * This callback is invoked when a transmission has physically completed. - */ -static void txend2(UARTDriver *uartp) { - - (void)uartp; - palSetPad(IOPORT3, GPIOC_LED); - chSysLockFromIsr(); - if (chVTIsArmedI(&vt1)) - chVTResetI(&vt1); - chVTSetI(&vt1, MS2ST(5000), restart, NULL); - chSysUnlockFromIsr(); -} - -/* - * This callback is invoked on a receive error, the errors mask is passed - * as parameter. - */ -static void rxerr(UARTDriver *uartp, uartflags_t e) { - - (void)uartp; - (void)e; -} - -/* - * This callback is invoked when a character is received but the application - * was not ready to receive it, the character is passed as parameter. - */ -static void rxchar(UARTDriver *uartp, uint16_t c) { - - (void)uartp; - (void)c; - /* Flashing the LED each time a character is received.*/ - palClearPad(IOPORT3, GPIOC_LED); - chSysLockFromIsr(); - if (chVTIsArmedI(&vt2)) - chVTResetI(&vt2); - chVTSetI(&vt2, MS2ST(200), ledoff, NULL); - chSysUnlockFromIsr(); -} - -/* - * This callback is invoked when a receive buffer has been completely written. - */ -static void rxend(UARTDriver *uartp) { - - (void)uartp; -} - -/* - * UART driver configuration structure. - */ -static UARTConfig uart_cfg_1 = { - txend1, - txend2, - rxend, - rxchar, - rxerr, - 38400, - 0, - USART_CR2_LINEN, - 0 -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the serial driver 2 using the driver default configuration. - */ - uartStart(&UARTD2, &uart_cfg_1); - - /* - * Starts the transmission, it will be handled entirely in background. - */ - uartStartSend(&UARTD2, 13, "Starting...\r\n"); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F1xx/UART/mcuconf.h b/testhal/STM32F1xx/UART/mcuconf.h deleted file mode 100644 index 05ad2de0d..000000000 --- a/testhal/STM32F1xx/UART/mcuconf.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 TRUE -#define STM32_UART_USE_USART2 TRUE -#define STM32_UART_USE_USART3 TRUE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - diff --git a/testhal/STM32F1xx/UART/readme.txt b/testhal/STM32F1xx/UART/readme.txt deleted file mode 100644 index e24a2c568..000000000 --- a/testhal/STM32F1xx/UART/readme.txt +++ /dev/null @@ -1,26 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - UART driver demo for STM32. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Olimex STM32-P103 board. - -** The Demo ** - -The application demonstrates the use of the STM32 UART driver. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F1xx/USB_CDC/Makefile b/testhal/STM32F1xx/USB_CDC/Makefile deleted file mode 100644 index 0c781d14c..000000000 --- a/testhal/STM32F1xx/USB_CDC/Makefile +++ /dev/null @@ -1,209 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/OLIMEX_STM32_P103/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F1xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F1xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F103xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/shell.c \ - $(CHIBIOS)/os/various/chprintf.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F1xx/USB_CDC/chconf.h b/testhal/STM32F1xx/USB_CDC/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F1xx/USB_CDC/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/USB_CDC/halconf.h b/testhal/STM32F1xx/USB_CDC/halconf.h deleted file mode 100644 index cd76b0cfe..000000000 --- a/testhal/STM32F1xx/USB_CDC/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/USB_CDC/main.c b/testhal/STM32F1xx/USB_CDC/main.c deleted file mode 100644 index 8b11e7ed4..000000000 --- a/testhal/STM32F1xx/USB_CDC/main.c +++ /dev/null @@ -1,509 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include -#include - -#include "ch.h" -#include "hal.h" -#include "test.h" - -#include "shell.h" -#include "chprintf.h" - -/*===========================================================================*/ -/* USB related stuff. */ -/*===========================================================================*/ - -/* - * Endpoints to be used for USBD1. - */ -#define USBD1_DATA_REQUEST_EP 1 -#define USBD1_DATA_AVAILABLE_EP 1 -#define USBD1_INTERRUPT_REQUEST_EP 2 - -/* - * Serial over USB Driver structure. - */ -static SerialUSBDriver SDU1; - -/* - * USB Device Descriptor. - */ -static const uint8_t vcom_device_descriptor_data[18] = { - USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ - 0x02, /* bDeviceClass (CDC). */ - 0x00, /* bDeviceSubClass. */ - 0x00, /* bDeviceProtocol. */ - 0x40, /* bMaxPacketSize. */ - 0x0483, /* idVendor (ST). */ - 0x5740, /* idProduct. */ - 0x0200, /* bcdDevice. */ - 1, /* iManufacturer. */ - 2, /* iProduct. */ - 3, /* iSerialNumber. */ - 1) /* bNumConfigurations. */ -}; - -/* - * Device Descriptor wrapper. - */ -static const USBDescriptor vcom_device_descriptor = { - sizeof vcom_device_descriptor_data, - vcom_device_descriptor_data -}; - -/* Configuration Descriptor tree for a CDC.*/ -static const uint8_t vcom_configuration_descriptor_data[67] = { - /* Configuration Descriptor.*/ - USB_DESC_CONFIGURATION(67, /* wTotalLength. */ - 0x02, /* bNumInterfaces. */ - 0x01, /* bConfigurationValue. */ - 0, /* iConfiguration. */ - 0xC0, /* bmAttributes (self powered). */ - 50), /* bMaxPower (100mA). */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x01, /* bNumEndpoints. */ - 0x02, /* bInterfaceClass (Communications - Interface Class, CDC section - 4.2). */ - 0x02, /* bInterfaceSubClass (Abstract - Control Model, CDC section 4.3). */ - 0x01, /* bInterfaceProtocol (AT commands, - CDC section 4.4). */ - 0), /* iInterface. */ - /* Header Functional Descriptor (CDC section 5.2.3).*/ - USB_DESC_BYTE (5), /* bLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header - Functional Descriptor. */ - USB_DESC_BCD (0x0110), /* bcdCDC. */ - /* Call Management Functional Descriptor. */ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */ - USB_DESC_BYTE (0x01), /* bDataInterface. */ - /* ACM Functional Descriptor.*/ - USB_DESC_BYTE (4), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract - Control Management Descriptor). */ - USB_DESC_BYTE (0x02), /* bmCapabilities. */ - /* Union Functional Descriptor.*/ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bMasterInterface (Communication - Class Interface). */ - USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class - Interface). */ - /* Endpoint 2 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_INTERRUPT_REQUEST_EP|0x80, - 0x03, /* bmAttributes (Interrupt). */ - 0x0008, /* wMaxPacketSize. */ - 0xFF), /* bInterval. */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x02, /* bNumEndpoints. */ - 0x0A, /* bInterfaceClass (Data Class - Interface, CDC section 4.5). */ - 0x00, /* bInterfaceSubClass (CDC section - 4.6). */ - 0x00, /* bInterfaceProtocol (CDC section - 4.7). */ - 0x00), /* iInterface. */ - /* Endpoint 3 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00), /* bInterval. */ - /* Endpoint 1 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00) /* bInterval. */ -}; - -/* - * Configuration Descriptor wrapper. - */ -static const USBDescriptor vcom_configuration_descriptor = { - sizeof vcom_configuration_descriptor_data, - vcom_configuration_descriptor_data -}; - -/* - * U.S. English language identifier. - */ -static const uint8_t vcom_string0[] = { - USB_DESC_BYTE(4), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ -}; - -/* - * Vendor string. - */ -static const uint8_t vcom_string1[] = { - USB_DESC_BYTE(38), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0, - 'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0, - 'c', 0, 's', 0 -}; - -/* - * Device Description string. - */ -static const uint8_t vcom_string2[] = { - USB_DESC_BYTE(56), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0, - 'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0, - 'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0, - 'o', 0, 'r', 0, 't', 0 -}; - -/* - * Serial Number string. - */ -static const uint8_t vcom_string3[] = { - USB_DESC_BYTE(8), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - '0' + CH_KERNEL_MAJOR, 0, - '0' + CH_KERNEL_MINOR, 0, - '0' + CH_KERNEL_PATCH, 0 -}; - -/* - * Strings wrappers array. - */ -static const USBDescriptor vcom_strings[] = { - {sizeof vcom_string0, vcom_string0}, - {sizeof vcom_string1, vcom_string1}, - {sizeof vcom_string2, vcom_string2}, - {sizeof vcom_string3, vcom_string3} -}; - -/* - * Handles the GET_DESCRIPTOR callback. All required descriptors must be - * handled here. - */ -static const USBDescriptor *get_descriptor(USBDriver *usbp, - uint8_t dtype, - uint8_t dindex, - uint16_t lang) { - - (void)usbp; - (void)lang; - switch (dtype) { - case USB_DESCRIPTOR_DEVICE: - return &vcom_device_descriptor; - case USB_DESCRIPTOR_CONFIGURATION: - return &vcom_configuration_descriptor; - case USB_DESCRIPTOR_STRING: - if (dindex < 4) - return &vcom_strings[dindex]; - } - return NULL; -} - -/** - * @brief IN EP1 state. - */ -static USBInEndpointState ep1instate; - -/** - * @brief OUT EP1 state. - */ -static USBOutEndpointState ep1outstate; - -/** - * @brief EP1 initialization structure (both IN and OUT). - */ -static const USBEndpointConfig ep1config = { - USB_EP_MODE_TYPE_BULK, - NULL, - sduDataTransmitted, - sduDataReceived, - 0x0040, - 0x0040, - &ep1instate, - &ep1outstate, - 1, - NULL -}; - -/** - * @brief IN EP2 state. - */ -static USBInEndpointState ep2instate; - -/** - * @brief EP2 initialization structure (IN only). - */ -static const USBEndpointConfig ep2config = { - USB_EP_MODE_TYPE_INTR, - NULL, - sduInterruptTransmitted, - NULL, - 0x0010, - 0x0000, - &ep2instate, - NULL, - 1, - NULL -}; - -/* - * Handles the USB driver global events. - */ -static void usb_event(USBDriver *usbp, usbevent_t event) { - - switch (event) { - case USB_EVENT_RESET: - return; - case USB_EVENT_ADDRESS: - return; - case USB_EVENT_CONFIGURED: - chSysLockFromIsr(); - - /* Enables the endpoints specified into the configuration. - Note, this callback is invoked from an ISR so I-Class functions - must be used.*/ - usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config); - usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config); - - /* Resetting the state of the CDC subsystem.*/ - sduConfigureHookI(&SDU1); - - chSysUnlockFromIsr(); - return; - case USB_EVENT_SUSPEND: - return; - case USB_EVENT_WAKEUP: - return; - case USB_EVENT_STALLED: - return; - } - return; -} - -/* - * USB driver configuration. - */ -static const USBConfig usbcfg = { - usb_event, - get_descriptor, - sduRequestsHook, - NULL -}; - -/* - * Serial over USB driver configuration. - */ -static const SerialUSBConfig serusbcfg = { - &USBD1, - USBD1_DATA_REQUEST_EP, - USBD1_DATA_AVAILABLE_EP, - USBD1_INTERRUPT_REQUEST_EP -}; - -/*===========================================================================*/ -/* Command line related. */ -/*===========================================================================*/ - -#define SHELL_WA_SIZE THD_WA_SIZE(2048) -#define TEST_WA_SIZE THD_WA_SIZE(256) - -static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) { - size_t n, size; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: mem\r\n"); - return; - } - n = chHeapStatus(NULL, &size); - chprintf(chp, "core free memory : %u bytes\r\n", chCoreStatus()); - chprintf(chp, "heap fragments : %u\r\n", n); - chprintf(chp, "heap free total : %u bytes\r\n", size); -} - -static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) { - static const char *states[] = {THD_STATE_NAMES}; - Thread *tp; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: threads\r\n"); - return; - } - chprintf(chp, " addr stack prio refs state time\r\n"); - tp = chRegFirstThread(); - do { - chprintf(chp, "%.8lx %.8lx %4lu %4lu %9s %lu\r\n", - (uint32_t)tp, (uint32_t)tp->p_ctx.r13, - (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1), - states[tp->p_state], (uint32_t)tp->p_time); - tp = chRegNextThread(tp); - } while (tp != NULL); -} - -static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) { - Thread *tp; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: test\r\n"); - return; - } - tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriority(), - TestThread, chp); - if (tp == NULL) { - chprintf(chp, "out of memory\r\n"); - return; - } - chThdWait(tp); -} - -static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) { - static uint8_t buf[] = - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: write\r\n"); - return; - } - - while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) { - chSequentialStreamWrite(&SDU1, buf, sizeof buf - 1); - } - chprintf(chp, "\r\n\nstopped\r\n"); -} - -static const ShellCommand commands[] = { - {"mem", cmd_mem}, - {"threads", cmd_threads}, - {"test", cmd_test}, - {"write", cmd_write}, - {NULL, NULL} -}; - -static const ShellConfig shell_cfg1 = { - (BaseSequentialStream *)&SDU1, - commands -}; - -/*===========================================================================*/ -/* Generic code. */ -/*===========================================================================*/ - -/* - * Red LED blinker thread, times are in milliseconds. - */ -static WORKING_AREA(waThread1, 128); -static msg_t Thread1(void *arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - systime_t time = serusbcfg.usbp->state == USB_ACTIVE ? 250 : 500; - palClearPad(IOPORT3, GPIOC_LED); - chThdSleepMilliseconds(time); - palSetPad(IOPORT3, GPIOC_LED); - chThdSleepMilliseconds(time); - } -} - -/* - * Application entry point. - */ -int main(void) { - Thread *shelltp = NULL; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes a serial-over-USB CDC driver. - */ - sduObjectInit(&SDU1); - sduStart(&SDU1, &serusbcfg); - - /* - * Activates the USB driver and then the USB bus pull-up on D+. - * Note, a delay is inserted in order to not have to disconnect the cable - * after a reset. - */ - usbDisconnectBus(serusbcfg.usbp); - chThdSleepMilliseconds(1500); - usbStart(serusbcfg.usbp, &usbcfg); - usbConnectBus(serusbcfg.usbp); - - /* - * Shell manager initialization. - */ - shellInit(); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing except - * sleeping in a loop and check the button state. - */ - while (TRUE) { - if (!shelltp && (SDU1.config->usbp->state == USB_ACTIVE)) - shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO); - else if (chThdTerminated(shelltp)) { - chThdRelease(shelltp); /* Recovers memory of the previous shell. */ - shelltp = NULL; /* Triggers spawning of a new shell. */ - } - chThdSleepMilliseconds(1000); - } -} diff --git a/testhal/STM32F1xx/USB_CDC/mcuconf.h b/testhal/STM32F1xx/USB_CDC/mcuconf.h deleted file mode 100644 index ba73e46b0..000000000 --- a/testhal/STM32F1xx/USB_CDC/mcuconf.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - diff --git a/testhal/STM32F1xx/USB_CDC/readme.txt b/testhal/STM32F1xx/USB_CDC/readme.txt deleted file mode 100644 index 2d71df64f..000000000 --- a/testhal/STM32F1xx/USB_CDC/readme.txt +++ /dev/null @@ -1,26 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - USB-CDC driver demo for STM32. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Olimex STM32-P103 board. - -** The Demo ** - -The application demonstrates the use of the STM32 USB driver. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F1xx/USB_CDC_F107/.cproject b/testhal/STM32F1xx/USB_CDC_F107/.cproject deleted file mode 100644 index e5f35ee12..000000000 --- a/testhal/STM32F1xx/USB_CDC_F107/.cproject +++ /dev/null @@ -1,50 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F1xx/USB_CDC_F107/.project b/testhal/STM32F1xx/USB_CDC_F107/.project deleted file mode 100644 index cdd1937af..000000000 --- a/testhal/STM32F1xx/USB_CDC_F107/.project +++ /dev/null @@ -1,95 +0,0 @@ - - - TEST-STM32F1xx-USB_CDC_F107 - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/OLIMEX_STM32_P107 - - - os - 2 - CHIBIOS/os - - - test - 2 - CHIBIOS/test - - - diff --git a/testhal/STM32F1xx/USB_CDC_F107/Makefile b/testhal/STM32F1xx/USB_CDC_F107/Makefile deleted file mode 100644 index 9b861f6d3..000000000 --- a/testhal/STM32F1xx/USB_CDC_F107/Makefile +++ /dev/null @@ -1,209 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/OLIMEX_STM32_P107/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F1xx/platform_f105_f107.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F1xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F107xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/shell.c \ - $(CHIBIOS)/os/various/chprintf.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F1xx/USB_CDC_F107/chconf.h b/testhal/STM32F1xx/USB_CDC_F107/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F1xx/USB_CDC_F107/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/USB_CDC_F107/halconf.h b/testhal/STM32F1xx/USB_CDC_F107/halconf.h deleted file mode 100644 index cd76b0cfe..000000000 --- a/testhal/STM32F1xx/USB_CDC_F107/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/USB_CDC_F107/main.c b/testhal/STM32F1xx/USB_CDC_F107/main.c deleted file mode 100644 index 8dda559c0..000000000 --- a/testhal/STM32F1xx/USB_CDC_F107/main.c +++ /dev/null @@ -1,509 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include -#include - -#include "ch.h" -#include "hal.h" -#include "test.h" - -#include "shell.h" -#include "chprintf.h" - -/*===========================================================================*/ -/* USB related stuff. */ -/*===========================================================================*/ - -/* - * Endpoints to be used for USBD1. - */ -#define USBD1_DATA_REQUEST_EP 1 -#define USBD1_DATA_AVAILABLE_EP 1 -#define USBD1_INTERRUPT_REQUEST_EP 2 - -/* - * Serial over USB Driver structure. - */ -static SerialUSBDriver SDU1; - -/* - * USB Device Descriptor. - */ -static const uint8_t vcom_device_descriptor_data[18] = { - USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ - 0x02, /* bDeviceClass (CDC). */ - 0x00, /* bDeviceSubClass. */ - 0x00, /* bDeviceProtocol. */ - 0x40, /* bMaxPacketSize. */ - 0x0483, /* idVendor (ST). */ - 0x5740, /* idProduct. */ - 0x0200, /* bcdDevice. */ - 1, /* iManufacturer. */ - 2, /* iProduct. */ - 3, /* iSerialNumber. */ - 1) /* bNumConfigurations. */ -}; - -/* - * Device Descriptor wrapper. - */ -static const USBDescriptor vcom_device_descriptor = { - sizeof vcom_device_descriptor_data, - vcom_device_descriptor_data -}; - -/* Configuration Descriptor tree for a CDC.*/ -static const uint8_t vcom_configuration_descriptor_data[67] = { - /* Configuration Descriptor.*/ - USB_DESC_CONFIGURATION(67, /* wTotalLength. */ - 0x02, /* bNumInterfaces. */ - 0x01, /* bConfigurationValue. */ - 0, /* iConfiguration. */ - 0xC0, /* bmAttributes (self powered). */ - 50), /* bMaxPower (100mA). */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x01, /* bNumEndpoints. */ - 0x02, /* bInterfaceClass (Communications - Interface Class, CDC section - 4.2). */ - 0x02, /* bInterfaceSubClass (Abstract - Control Model, CDC section 4.3). */ - 0x01, /* bInterfaceProtocol (AT commands, - CDC section 4.4). */ - 0), /* iInterface. */ - /* Header Functional Descriptor (CDC section 5.2.3).*/ - USB_DESC_BYTE (5), /* bLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header - Functional Descriptor. */ - USB_DESC_BCD (0x0110), /* bcdCDC. */ - /* Call Management Functional Descriptor. */ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */ - USB_DESC_BYTE (0x01), /* bDataInterface. */ - /* ACM Functional Descriptor.*/ - USB_DESC_BYTE (4), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract - Control Management Descriptor). */ - USB_DESC_BYTE (0x02), /* bmCapabilities. */ - /* Union Functional Descriptor.*/ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bMasterInterface (Communication - Class Interface). */ - USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class - Interface). */ - /* Endpoint 2 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_INTERRUPT_REQUEST_EP|0x80, - 0x03, /* bmAttributes (Interrupt). */ - 0x0008, /* wMaxPacketSize. */ - 0xFF), /* bInterval. */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x02, /* bNumEndpoints. */ - 0x0A, /* bInterfaceClass (Data Class - Interface, CDC section 4.5). */ - 0x00, /* bInterfaceSubClass (CDC section - 4.6). */ - 0x00, /* bInterfaceProtocol (CDC section - 4.7). */ - 0x00), /* iInterface. */ - /* Endpoint 3 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00), /* bInterval. */ - /* Endpoint 1 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00) /* bInterval. */ -}; - -/* - * Configuration Descriptor wrapper. - */ -static const USBDescriptor vcom_configuration_descriptor = { - sizeof vcom_configuration_descriptor_data, - vcom_configuration_descriptor_data -}; - -/* - * U.S. English language identifier. - */ -static const uint8_t vcom_string0[] = { - USB_DESC_BYTE(4), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ -}; - -/* - * Vendor string. - */ -static const uint8_t vcom_string1[] = { - USB_DESC_BYTE(38), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0, - 'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0, - 'c', 0, 's', 0 -}; - -/* - * Device Description string. - */ -static const uint8_t vcom_string2[] = { - USB_DESC_BYTE(56), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0, - 'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0, - 'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0, - 'o', 0, 'r', 0, 't', 0 -}; - -/* - * Serial Number string. - */ -static const uint8_t vcom_string3[] = { - USB_DESC_BYTE(8), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - '0' + CH_KERNEL_MAJOR, 0, - '0' + CH_KERNEL_MINOR, 0, - '0' + CH_KERNEL_PATCH, 0 -}; - -/* - * Strings wrappers array. - */ -static const USBDescriptor vcom_strings[] = { - {sizeof vcom_string0, vcom_string0}, - {sizeof vcom_string1, vcom_string1}, - {sizeof vcom_string2, vcom_string2}, - {sizeof vcom_string3, vcom_string3} -}; - -/* - * Handles the GET_DESCRIPTOR callback. All required descriptors must be - * handled here. - */ -static const USBDescriptor *get_descriptor(USBDriver *usbp, - uint8_t dtype, - uint8_t dindex, - uint16_t lang) { - - (void)usbp; - (void)lang; - switch (dtype) { - case USB_DESCRIPTOR_DEVICE: - return &vcom_device_descriptor; - case USB_DESCRIPTOR_CONFIGURATION: - return &vcom_configuration_descriptor; - case USB_DESCRIPTOR_STRING: - if (dindex < 4) - return &vcom_strings[dindex]; - } - return NULL; -} - -/** - * @brief IN EP1 state. - */ -static USBInEndpointState ep1instate; - -/** - * @brief OUT EP1 state. - */ -static USBOutEndpointState ep1outstate; - -/** - * @brief EP1 initialization structure (both IN and OUT). - */ -static const USBEndpointConfig ep1config = { - USB_EP_MODE_TYPE_BULK, - NULL, - sduDataTransmitted, - sduDataReceived, - 0x0040, - 0x0040, - &ep1instate, - &ep1outstate, - 1, - NULL -}; - -/** - * @brief IN EP2 state. - */ -static USBInEndpointState ep2instate; - -/** - * @brief EP2 initialization structure (IN only). - */ -static const USBEndpointConfig ep2config = { - USB_EP_MODE_TYPE_INTR, - NULL, - sduInterruptTransmitted, - NULL, - 0x0010, - 0x0000, - &ep2instate, - NULL, - 1, - NULL -}; - -/* - * Handles the USB driver global events. - */ -static void usb_event(USBDriver *usbp, usbevent_t event) { - - switch (event) { - case USB_EVENT_RESET: - return; - case USB_EVENT_ADDRESS: - return; - case USB_EVENT_CONFIGURED: - chSysLockFromIsr(); - - /* Enables the endpoints specified into the configuration. - Note, this callback is invoked from an ISR so I-Class functions - must be used.*/ - usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config); - usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config); - - /* Resetting the state of the CDC subsystem.*/ - sduConfigureHookI(&SDU1); - - chSysUnlockFromIsr(); - return; - case USB_EVENT_SUSPEND: - return; - case USB_EVENT_WAKEUP: - return; - case USB_EVENT_STALLED: - return; - } - return; -} - -/* - * USB driver configuration. - */ -static const USBConfig usbcfg = { - usb_event, - get_descriptor, - sduRequestsHook, - NULL -}; - -/* - * Serial over USB driver configuration. - */ -static const SerialUSBConfig serusbcfg = { - &USBD1, - USBD1_DATA_REQUEST_EP, - USBD1_DATA_AVAILABLE_EP, - USBD1_INTERRUPT_REQUEST_EP -}; - -/*===========================================================================*/ -/* Command line related. */ -/*===========================================================================*/ - -#define SHELL_WA_SIZE THD_WA_SIZE(2048) -#define TEST_WA_SIZE THD_WA_SIZE(256) - -static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) { - size_t n, size; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: mem\r\n"); - return; - } - n = chHeapStatus(NULL, &size); - chprintf(chp, "core free memory : %u bytes\r\n", chCoreStatus()); - chprintf(chp, "heap fragments : %u\r\n", n); - chprintf(chp, "heap free total : %u bytes\r\n", size); -} - -static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) { - static const char *states[] = {THD_STATE_NAMES}; - Thread *tp; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: threads\r\n"); - return; - } - chprintf(chp, " addr stack prio refs state time\r\n"); - tp = chRegFirstThread(); - do { - chprintf(chp, "%.8lx %.8lx %4lu %4lu %9s %lu\r\n", - (uint32_t)tp, (uint32_t)tp->p_ctx.r13, - (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1), - states[tp->p_state], (uint32_t)tp->p_time); - tp = chRegNextThread(tp); - } while (tp != NULL); -} - -static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) { - Thread *tp; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: test\r\n"); - return; - } - tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriority(), - TestThread, chp); - if (tp == NULL) { - chprintf(chp, "out of memory\r\n"); - return; - } - chThdWait(tp); -} - -static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) { - static uint8_t buf[] = - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: write\r\n"); - return; - } - - while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) { - chSequentialStreamWrite(&SDU1, buf, sizeof buf - 1); - } - chprintf(chp, "\r\n\nstopped\r\n"); -} - -static const ShellCommand commands[] = { - {"mem", cmd_mem}, - {"threads", cmd_threads}, - {"test", cmd_test}, - {"write", cmd_write}, - {NULL, NULL} -}; - -static const ShellConfig shell_cfg1 = { - (BaseSequentialStream *)&SDU1, - commands -}; - -/*===========================================================================*/ -/* Generic code. */ -/*===========================================================================*/ - -/* - * Red LED blinker thread, times are in milliseconds. - */ -static WORKING_AREA(waThread1, 128); -static msg_t Thread1(void *arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - systime_t time = serusbcfg.usbp->state == USB_ACTIVE ? 250 : 500; - palClearPad(IOPORT3, GPIOC_LED_STATUS1); - chThdSleepMilliseconds(time); - palSetPad(IOPORT3, GPIOC_LED_STATUS1); - chThdSleepMilliseconds(time); - } -} - -/* - * Application entry point. - */ -int main(void) { - Thread *shelltp = NULL; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes a serial-over-USB CDC driver. - */ - sduObjectInit(&SDU1); - sduStart(&SDU1, &serusbcfg); - - /* - * Activates the USB driver and then the USB bus pull-up on D+. - * Note, a delay is inserted in order to not have to disconnect the cable - * after a reset. - */ - usbDisconnectBus(serusbcfg.usbp); - chThdSleepMilliseconds(1000); - usbStart(serusbcfg.usbp, &usbcfg); - usbConnectBus(serusbcfg.usbp); - - /* - * Shell manager initialization. - */ - shellInit(); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing except - * sleeping in a loop and check the button state. - */ - while (TRUE) { - if (!shelltp && (SDU1.config->usbp->state == USB_ACTIVE)) - shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO); - else if (chThdTerminated(shelltp)) { - chThdRelease(shelltp); /* Recovers memory of the previous shell. */ - shelltp = NULL; /* Triggers spawning of a new shell. */ - } - chThdSleepMilliseconds(1000); - } -} diff --git a/testhal/STM32F1xx/USB_CDC_F107/mcuconf.h b/testhal/STM32F1xx/USB_CDC_F107/mcuconf.h deleted file mode 100644 index 5b6ba6683..000000000 --- a/testhal/STM32F1xx/USB_CDC_F107/mcuconf.h +++ /dev/null @@ -1,207 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F107 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F107_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_PREDIV1 -#define STM32_PREDIV1SRC STM32_PREDIV1SRC_PLL2 -#define STM32_PREDIV1_VALUE 5 -#define STM32_PLLMUL_VALUE 9 -#define STM32_PREDIV2_VALUE 5 -#define STM32_PLL2MUL_VALUE 8 -#define STM32_PLL3MUL_VALUE 10 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_OTG_CLOCK_REQUIRED TRUE -#define STM32_OTGFSPRE STM32_OTGFSPRE_DIV3 -#define STM32_I2S_CLOCK_REQUIRED FALSE -#define STM32_MCOSEL STM32_MCOSEL_PLL3 -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 TRUE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32F1xx/USB_CDC_F107/readme.txt b/testhal/STM32F1xx/USB_CDC_F107/readme.txt deleted file mode 100644 index 43098d8ac..000000000 --- a/testhal/STM32F1xx/USB_CDC_F107/readme.txt +++ /dev/null @@ -1,26 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - USB-CDC driver demo for STM32. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Olimex STM32-P107 board. - -** The Demo ** - -The application demonstrates the use of the STM32 USB (OTG) driver. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F1xx/USB_MSC/Makefile b/testhal/STM32F1xx/USB_MSC/Makefile deleted file mode 100644 index 1f76375fe..000000000 --- a/testhal/STM32F1xx/USB_MSC/Makefile +++ /dev/null @@ -1,210 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/OLIMEX_STM32_P103/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F1xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F1xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F103xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/usb_msc.c \ - $(CHIBIOS)/os/various/evtimer.c \ - $(CHIBIOS)/os/various/syscalls.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F1xx/USB_MSC/chconf.h b/testhal/STM32F1xx/USB_MSC/chconf.h deleted file mode 100644 index f943ea80c..000000000 --- a/testhal/STM32F1xx/USB_MSC/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE FALSE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/USB_MSC/halconf.h b/testhal/STM32F1xx/USB_MSC/halconf.h deleted file mode 100644 index 2d8f40004..000000000 --- a/testhal/STM32F1xx/USB_MSC/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI TRUE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F1xx/USB_MSC/main.c b/testhal/STM32F1xx/USB_MSC/main.c deleted file mode 100644 index c8e350596..000000000 --- a/testhal/STM32F1xx/USB_MSC/main.c +++ /dev/null @@ -1,313 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" -#include "test.h" - -#include "usb_msc.h" - -/*===========================================================================*/ -/* USB related stuff. */ -/*===========================================================================*/ - -/* - * USB Device Descriptor. - */ -static const uint8_t msc_device_descriptor_data[18] = { - USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ - 0x00, /* bDeviceClass (in interface). */ - 0x00, /* bDeviceSubClass. */ - 0x00, /* bDeviceProtocol. */ - 0x40, /* bMaxPacketSize. */ - 0x0483, /* idVendor (ST). */ - 0x2004, /* idProduct. */ - 0x0200, /* bcdDevice. */ - 1, /* iManufacturer. */ - 2, /* iProduct. */ - 3, /* iSerialNumber. */ - 1) /* bNumConfigurations. */ -}; - -/* - * Device Descriptor wrapper. - */ -static const USBDescriptor msc_device_descriptor = { - sizeof msc_device_descriptor_data, - msc_device_descriptor_data -}; - -/* Configuration Descriptor tree for a CDC.*/ -static const uint8_t msc_configuration_descriptor_data[32] = { - /* Configuration Descriptor.*/ - USB_DESC_CONFIGURATION(32, /* wTotalLength. */ - 0x01, /* bNumInterfaces. */ - 0x01, /* bConfigurationValue. */ - 0, /* iConfiguration. */ - 0xC0, /* bmAttributes (self powered). */ - 50), /* bMaxPower (100mA). */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x02, /* bNumEndpoints. */ - 0x08, /* bInterfaceClass (Mass Stprage). */ - 0x06, /* bInterfaceSubClass (SCSI - transparent command set, MSCO - chapter 2). */ - 0x50, /* bInterfaceProtocol (Bulk-Only - Mass Storage, MSCO chapter 3). */ - 4), /* iInterface. */ - /* Endpoint 1 Descriptor.*/ - USB_DESC_ENDPOINT (MSC_DATA_IN_EP|0x80, /* bEndpointAddress. */ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00), /* bInterval (ignored for bulk). */ - /* Endpoint 2 Descriptor.*/ - USB_DESC_ENDPOINT (MSC_DATA_OUT_EP, /* bEndpointAddress. */ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00), /* bInterval (ignored for bulk). */ -}; - -/* - * Configuration Descriptor wrapper. - */ -static const USBDescriptor msc_configuration_descriptor = { - sizeof msc_configuration_descriptor_data, - msc_configuration_descriptor_data -}; - -/* - * U.S. English language identifier. - */ -static const uint8_t msc_string0[] = { - USB_DESC_BYTE(4), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ -}; - -/* - * Vendor string. - */ -static const uint8_t msc_string1[] = { - USB_DESC_BYTE(38), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0, - 'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0, - 'c', 0, 's', 0 -}; - -/* - * Device Description string. - */ -static const uint8_t msc_string2[] = { - USB_DESC_BYTE(50), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0, - 'R', 0, 'T', 0, ' ', 0, 'M', 0, 'a', 0, 's', 0, 's', 0, ' ', 0, - 'S', 0, 't', 0, 'o', 0, 'r', 0, 'a', 0, 'g', 0, 'e', 0 -}; - -/* - * Serial Number string. - */ -static const uint8_t msc_string3[] = { - USB_DESC_BYTE(8), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - '0' + CH_KERNEL_MAJOR, 0, - '0' + CH_KERNEL_MINOR, 0, - '0' + CH_KERNEL_PATCH, 0 -}; - -/* - * Interface string. - */ -static const uint8_t msc_string4[] = { - 16, /* bLength. */ - USB_DESCRIPTOR_STRING, /* bDescriptorType. */ - 'S', 0, 'T', 0, ' ', 0, 'M', 0, 'a', 0, 's', 0, 's', 0 -}; - -/* - * Strings wrappers array. - */ -static const USBDescriptor msc_strings[] = { - {sizeof msc_string0, msc_string0}, - {sizeof msc_string1, msc_string1}, - {sizeof msc_string2, msc_string2}, - {sizeof msc_string3, msc_string3}, - {sizeof msc_string4, msc_string4} -}; - -/* - * Handles the GET_DESCRIPTOR callback. All required descriptors must be - * handled here. - */ -static const USBDescriptor *get_descriptor(USBDriver *usbp, - uint8_t dtype, - uint8_t dindex, - uint16_t lang) { - - (void)usbp; - (void)lang; - switch (dtype) { - case USB_DESCRIPTOR_DEVICE: - return &msc_device_descriptor; - case USB_DESCRIPTOR_CONFIGURATION: - return &msc_configuration_descriptor; - case USB_DESCRIPTOR_STRING: - if (dindex < 5) - return &msc_strings[dindex]; - } - return NULL; -} - -/* - * IN EP1 state. - */ -USBInEndpointState ep1state; - -/* - * OUT EP2 state. - */ -USBOutEndpointState ep2state; - -/* - * EP1 initialization structure (IN only). - */ -static const USBEndpointConfig ep1config = { - USB_EP_MODE_TYPE_BULK | USB_EP_MODE_TRANSACTION, - mscDataTransmitted, - NULL, - 0x0040, - 0x0000, - &ep1state, - NULL -}; - -/* - * EP2 initialization structure (OUT only). - */ -static const USBEndpointConfig ep2config = { - USB_EP_MODE_TYPE_BULK | USB_EP_MODE_TRANSACTION, - NULL, - mscDataReceived, - 0x0000, - 0x0040, - NULL, - &ep2state -}; - -/* - * Handles the USB driver global events. - */ -static void usb_event(USBDriver *usbp, usbevent_t event) { - - switch (event) { - case USB_EVENT_RESET: - return; - case USB_EVENT_ADDRESS: - return; - case USB_EVENT_CONFIGURED: - /* Enables the endpoints specified into the configuration. - Note, this callback is invoked from an ISR so I-Class functions - must be used.*/ - chSysLockFromIsr(); - usbInitEndpointI(usbp, MSC_DATA_IN_EP, &ep1config); - usbInitEndpointI(usbp, MSC_DATA_OUT_EP, &ep2config); - chSysUnlockFromIsr(); - return; - case USB_EVENT_SUSPEND: - return; - case USB_EVENT_WAKEUP: - return; - case USB_EVENT_STALLED: - return; - } - return; -} - -/* - * Serial over USB driver configuration. - */ -static const USBConfig usbcfg = { - usb_event, - get_descriptor, - mscRequestsHook, - NULL -}; - -/*===========================================================================*/ -/* Generic code. */ -/*===========================================================================*/ - -/* - * Red LED blinker thread, times are in milliseconds. - */ -static WORKING_AREA(waThread1, 128); -static msg_t Thread1(void *arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - palClearPad(IOPORT3, GPIOC_LED); - chThdSleepMilliseconds(500); - palSetPad(IOPORT3, GPIOC_LED); - chThdSleepMilliseconds(500); - } -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the USB driver and then the USB bus pull-up on D+. - */ - usbStart(&USBD1, &usbcfg); - palClearPad(GPIOC, GPIOC_USB_DISC); - - /* - * Activates the serial driver 2 using the driver default configuration. - */ - sdStart(&SD2, NULL); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing except - * sleeping in a loop and check the button state. - */ - while (TRUE) { - if (palReadPad(IOPORT1, GPIOA_BUTTON)) - TestThread(&SD2); - chThdSleepMilliseconds(1000); - } -} diff --git a/testhal/STM32F1xx/USB_MSC/mcuconf.h b/testhal/STM32F1xx/USB_MSC/mcuconf.h deleted file mode 100644 index 157bbda32..000000000 --- a/testhal/STM32F1xx/USB_MSC/mcuconf.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - diff --git a/testhal/STM32F30x/ADC/.cproject b/testhal/STM32F30x/ADC/.cproject deleted file mode 100644 index 18ecf6a9c..000000000 --- a/testhal/STM32F30x/ADC/.cproject +++ /dev/null @@ -1,50 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F30x/ADC/.project b/testhal/STM32F30x/ADC/.project deleted file mode 100644 index 723f89815..000000000 --- a/testhal/STM32F30x/ADC/.project +++ /dev/null @@ -1,90 +0,0 @@ - - - STM32F30x-ADC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32F3_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F30x/ADC/Makefile b/testhal/STM32F30x/ADC/Makefile deleted file mode 100644 index 455c2e5da..000000000 --- a/testhal/STM32F30x/ADC/Makefile +++ /dev/null @@ -1,221 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32F3_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F30x/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F3xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F303xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various/devices_lib/accel \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F30x/ADC/chconf.h b/testhal/STM32F30x/ADC/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F30x/ADC/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/ADC/halconf.h b/testhal/STM32F30x/ADC/halconf.h deleted file mode 100644 index 85a5dbd3b..000000000 --- a/testhal/STM32F30x/ADC/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC TRUE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/ADC/main.c b/testhal/STM32F30x/ADC/main.c deleted file mode 100644 index 8489f1bef..000000000 --- a/testhal/STM32F30x/ADC/main.c +++ /dev/null @@ -1,172 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#define ADC_GRP1_NUM_CHANNELS 2 -#define ADC_GRP1_BUF_DEPTH 8 - -#define ADC_GRP2_NUM_CHANNELS 8 -#define ADC_GRP2_BUF_DEPTH 16 - -static adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH]; -static adcsample_t samples2[ADC_GRP2_NUM_CHANNELS * ADC_GRP2_BUF_DEPTH]; - -/* - * ADC streaming callback. - */ -size_t nx = 0, ny = 0; -static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) { - - (void)adcp; - if (samples2 == buffer) { - nx += n; - } - else { - ny += n; - } -} - -static void adcerrorcallback(ADCDriver *adcp, adcerror_t err) { - - (void)adcp; - (void)err; -} - -/* - * ADC conversion group. - * Mode: Linear buffer, 8 samples of 2 channels, SW triggered. - * Channels: IN7, IN8. - */ -static const ADCConversionGroup adcgrpcfg1 = { - FALSE, - ADC_GRP1_NUM_CHANNELS, - NULL, - adcerrorcallback, - 0, /* CFGR */ - ADC_TR(0, 4095), /* TR1 */ - 0, /* CCR */ - { /* SMPR[2] */ - 0, - 0 - }, - { /* SQR[4] */ - ADC_SQR1_SQ1_N(ADC_CHANNEL_IN7) | ADC_SQR1_SQ2_N(ADC_CHANNEL_IN8), - 0, - 0, - 0 - } -}; - -/* - * ADC conversion group. - * Mode: Continuous, 16 samples of 8 channels, SW triggered. - * Channels: IN7, IN8, IN7, IN8, IN7, IN8, Sensor, VBat/2. - */ -static const ADCConversionGroup adcgrpcfg2 = { - TRUE, - ADC_GRP2_NUM_CHANNELS, - adccallback, - adcerrorcallback, - 0, /* CFGR */ - ADC_TR(0, 4095), /* TR1 */ - ADC_CCR_TSEN | ADC_CCR_VBATEN, /* CCR */ - { /* SMPR[2] */ - ADC_SMPR1_SMP_AN7(ADC_SMPR_SMP_19P5) - | ADC_SMPR1_SMP_AN8(ADC_SMPR_SMP_19P5), - ADC_SMPR2_SMP_AN16(ADC_SMPR_SMP_61P5) - | ADC_SMPR2_SMP_AN17(ADC_SMPR_SMP_61P5), - }, - { /* SQR[4] */ - ADC_SQR1_SQ1_N(ADC_CHANNEL_IN7) | ADC_SQR1_SQ2_N(ADC_CHANNEL_IN8) | - ADC_SQR1_SQ3_N(ADC_CHANNEL_IN7) | ADC_SQR1_SQ4_N(ADC_CHANNEL_IN8), - ADC_SQR2_SQ5_N(ADC_CHANNEL_IN7) | ADC_SQR2_SQ6_N(ADC_CHANNEL_IN8) | - ADC_SQR2_SQ7_N(ADC_CHANNEL_IN16) | ADC_SQR2_SQ8_N(ADC_CHANNEL_IN17), - 0, - 0 - } -}; - -/* - * Red LEDs blinker thread, times are in milliseconds. - */ -static WORKING_AREA(waThread1, 128); -static msg_t Thread1(void *arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - palSetPad(GPIOE, GPIOE_LED10_RED); - chThdSleepMilliseconds(500); - palClearPad(GPIOE, GPIOE_LED10_RED); - chThdSleepMilliseconds(500); - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Setting up analog inputs used by the demo. - */ - palSetGroupMode(GPIOC, PAL_PORT_BIT(1) | PAL_PORT_BIT(2), - 0, PAL_MODE_INPUT_ANALOG); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Activates the ADC1 driver and the temperature sensor. - */ - adcStart(&ADCD1, NULL); - - /* - * Linear conversion. - */ - adcConvert(&ADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH); - chThdSleepMilliseconds(1000); - - /* - * Starts an ADC continuous conversion. - */ - adcStartConversion(&ADCD1, &adcgrpcfg2, samples2, ADC_GRP2_BUF_DEPTH); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - if (palReadPad(GPIOA, GPIOA_BUTTON)) { - adcStopConversion(&ADCD1); - } - chThdSleepMilliseconds(500); - } -} diff --git a/testhal/STM32F30x/ADC/mcuconf.h b/testhal/STM32F30x/ADC/mcuconf.h deleted file mode 100644 index 3f9c9b5fa..000000000 --- a/testhal/STM32F30x/ADC/mcuconf.h +++ /dev/null @@ -1,212 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F30x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 TRUE -#define STM32_ADC_USE_ADC3 TRUE -#define STM32_ADC_ADC12_DMA_PRIORITY 2 -#define STM32_ADC_ADC34_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_DUAL_MODE FALSE - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F30x/ADC/readme.txt b/testhal/STM32F30x/ADC/readme.txt deleted file mode 100644 index bc0a30424..000000000 --- a/testhal/STM32F30x/ADC/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - ADC driver demo for STM32F30x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F3-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F30x ADC driver. - -** Board Setup ** - -- Connect PC1 to 3.3V and PC2 to GND for analog measurements. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F30x/ADC_DUAL/.cproject b/testhal/STM32F30x/ADC_DUAL/.cproject deleted file mode 100644 index 151e30397..000000000 --- a/testhal/STM32F30x/ADC_DUAL/.cproject +++ /dev/null @@ -1,50 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F30x/ADC_DUAL/.project b/testhal/STM32F30x/ADC_DUAL/.project deleted file mode 100644 index 216f76c48..000000000 --- a/testhal/STM32F30x/ADC_DUAL/.project +++ /dev/null @@ -1,90 +0,0 @@ - - - STM32F30x-ADC_DUAL - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32F3_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F30x/ADC_DUAL/Makefile b/testhal/STM32F30x/ADC_DUAL/Makefile deleted file mode 100644 index 455c2e5da..000000000 --- a/testhal/STM32F30x/ADC_DUAL/Makefile +++ /dev/null @@ -1,221 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32F3_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F30x/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F3xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F303xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various/devices_lib/accel \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F30x/ADC_DUAL/chconf.h b/testhal/STM32F30x/ADC_DUAL/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F30x/ADC_DUAL/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/ADC_DUAL/halconf.h b/testhal/STM32F30x/ADC_DUAL/halconf.h deleted file mode 100644 index 85a5dbd3b..000000000 --- a/testhal/STM32F30x/ADC_DUAL/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC TRUE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/ADC_DUAL/main.c b/testhal/STM32F30x/ADC_DUAL/main.c deleted file mode 100644 index c4fa35c5c..000000000 --- a/testhal/STM32F30x/ADC_DUAL/main.c +++ /dev/null @@ -1,196 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#define ADC_GRP1_NUM_CHANNELS 4 -#define ADC_GRP1_BUF_DEPTH 8 - -#define ADC_GRP2_NUM_CHANNELS 16 -#define ADC_GRP2_BUF_DEPTH 16 - -static adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH]; -static adcsample_t samples2[ADC_GRP2_NUM_CHANNELS * ADC_GRP2_BUF_DEPTH]; - -/* - * ADC streaming callback. - */ -size_t nx = 0, ny = 0; -static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) { - - (void)adcp; - if (samples2 == buffer) { - nx += n; - } - else { - ny += n; - } -} - -static void adcerrorcallback(ADCDriver *adcp, adcerror_t err) { - - (void)adcp; - (void)err; -} - -/* - * ADC conversion group. - * Mode: Linear buffer, 8 samples of 2 channels, SW triggered. - * Channels: IN7, IN8. - */ -static const ADCConversionGroup adcgrpcfg1 = { - FALSE, - ADC_GRP1_NUM_CHANNELS, - NULL, - adcerrorcallback, - 0, /* CFGR */ - ADC_TR(0, 4095), /* TR1 */ - ADC_CCR_DUAL(1), /* CCR */ - { /* SMPR[2] */ - 0, - 0 - }, - { /* SQR[4] */ - ADC_SQR1_SQ1_N(ADC_CHANNEL_IN7) | ADC_SQR1_SQ2_N(ADC_CHANNEL_IN8), - 0, - 0, - 0 - }, - { /* SSMPR[2] */ - 0, - 0 - }, - { /* SSQR[4] */ - ADC_SQR1_SQ1_N(ADC_CHANNEL_IN8) | ADC_SQR1_SQ2_N(ADC_CHANNEL_IN7), - 0, - 0, - 0 - } -}; - -/* - * ADC conversion group. - * Mode: Continuous, 16 samples of 8 channels, SW triggered. - * Channels: IN7, IN8, IN7, IN8, IN7, IN8, Sensor, VBat/2. - */ -static const ADCConversionGroup adcgrpcfg2 = { - TRUE, - ADC_GRP2_NUM_CHANNELS, - adccallback, - adcerrorcallback, - 0, /* CFGR */ - ADC_TR(0, 4095), /* TR1 */ - ADC_CCR_DUAL(1) | ADC_CCR_TSEN | ADC_CCR_VBATEN, /* CCR */ - { /* SMPR[2] */ - ADC_SMPR1_SMP_AN7(ADC_SMPR_SMP_19P5) - | ADC_SMPR1_SMP_AN8(ADC_SMPR_SMP_19P5), - ADC_SMPR2_SMP_AN16(ADC_SMPR_SMP_61P5) - | ADC_SMPR2_SMP_AN17(ADC_SMPR_SMP_61P5), - }, - { /* SQR[4] */ - ADC_SQR1_SQ1_N(ADC_CHANNEL_IN7) | ADC_SQR1_SQ2_N(ADC_CHANNEL_IN8) | - ADC_SQR1_SQ3_N(ADC_CHANNEL_IN7) | ADC_SQR1_SQ4_N(ADC_CHANNEL_IN8), - ADC_SQR2_SQ5_N(ADC_CHANNEL_IN7) | ADC_SQR2_SQ6_N(ADC_CHANNEL_IN8) | - ADC_SQR2_SQ7_N(ADC_CHANNEL_IN16) | ADC_SQR2_SQ8_N(ADC_CHANNEL_IN17), - 0, - 0 - }, - { /* SSMPR[2] */ - ADC_SMPR1_SMP_AN7(ADC_SMPR_SMP_19P5) - | ADC_SMPR1_SMP_AN8(ADC_SMPR_SMP_19P5), - ADC_SMPR2_SMP_AN16(ADC_SMPR_SMP_61P5) - | ADC_SMPR2_SMP_AN17(ADC_SMPR_SMP_61P5), - }, - { /* SSQR[4] */ - ADC_SQR1_SQ1_N(ADC_CHANNEL_IN8) | ADC_SQR1_SQ2_N(ADC_CHANNEL_IN7) | - ADC_SQR1_SQ3_N(ADC_CHANNEL_IN8) | ADC_SQR1_SQ4_N(ADC_CHANNEL_IN7), - ADC_SQR2_SQ5_N(ADC_CHANNEL_IN8) | ADC_SQR2_SQ6_N(ADC_CHANNEL_IN7) | - ADC_SQR2_SQ7_N(ADC_CHANNEL_IN17) | ADC_SQR2_SQ8_N(ADC_CHANNEL_IN16), - 0, - 0 - } -}; - -/* - * Red LEDs blinker thread, times are in milliseconds. - */ -static WORKING_AREA(waThread1, 128); -static msg_t Thread1(void *arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - palSetPad(GPIOE, GPIOE_LED10_RED); - chThdSleepMilliseconds(500); - palClearPad(GPIOE, GPIOE_LED10_RED); - chThdSleepMilliseconds(500); - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Setting up analog inputs used by the demo. - */ - palSetGroupMode(GPIOC, PAL_PORT_BIT(1) | PAL_PORT_BIT(2), - 0, PAL_MODE_INPUT_ANALOG); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Activates the ADC1 driver and the temperature sensor. - */ - adcStart(&ADCD1, NULL); - - /* - * Linear conversion. - */ - adcConvert(&ADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH); - chThdSleepMilliseconds(1000); - - /* - * Starts an ADC continuous conversion. - */ - adcStartConversion(&ADCD1, &adcgrpcfg2, samples2, ADC_GRP2_BUF_DEPTH); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - if (palReadPad(GPIOA, GPIOA_BUTTON)) { - adcStopConversion(&ADCD1); - } - chThdSleepMilliseconds(500); - } -} diff --git a/testhal/STM32F30x/ADC_DUAL/mcuconf.h b/testhal/STM32F30x/ADC_DUAL/mcuconf.h deleted file mode 100644 index 4b69ad89d..000000000 --- a/testhal/STM32F30x/ADC_DUAL/mcuconf.h +++ /dev/null @@ -1,212 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F30x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 TRUE -#define STM32_ADC_USE_ADC3 TRUE -#define STM32_ADC_ADC12_DMA_PRIORITY 2 -#define STM32_ADC_ADC34_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_DUAL_MODE TRUE - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F30x/ADC_DUAL/readme.txt b/testhal/STM32F30x/ADC_DUAL/readme.txt deleted file mode 100644 index bc0a30424..000000000 --- a/testhal/STM32F30x/ADC_DUAL/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - ADC driver demo for STM32F30x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F3-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F30x ADC driver. - -** Board Setup ** - -- Connect PC1 to 3.3V and PC2 to GND for analog measurements. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F30x/CAN/.cproject b/testhal/STM32F30x/CAN/.cproject deleted file mode 100644 index 7cdad62bb..000000000 --- a/testhal/STM32F30x/CAN/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F30x/CAN/.project b/testhal/STM32F30x/CAN/.project deleted file mode 100644 index a01f8a133..000000000 --- a/testhal/STM32F30x/CAN/.project +++ /dev/null @@ -1,90 +0,0 @@ - - - STM32F30x-CAN - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j1 - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32F3_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F30x/CAN/Makefile b/testhal/STM32F30x/CAN/Makefile deleted file mode 100644 index 455c2e5da..000000000 --- a/testhal/STM32F30x/CAN/Makefile +++ /dev/null @@ -1,221 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32F3_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F30x/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F3xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F303xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various/devices_lib/accel \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F30x/CAN/chconf.h b/testhal/STM32F30x/CAN/chconf.h deleted file mode 100644 index f943ea80c..000000000 --- a/testhal/STM32F30x/CAN/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE FALSE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/CAN/halconf.h b/testhal/STM32F30x/CAN/halconf.h deleted file mode 100644 index 5b6535967..000000000 --- a/testhal/STM32F30x/CAN/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN TRUE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/CAN/main.c b/testhal/STM32F30x/CAN/main.c deleted file mode 100644 index c44acf566..000000000 --- a/testhal/STM32F30x/CAN/main.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * Internal loopback mode, 500KBaud, automatic wakeup, automatic recover - * from abort mode. - */ -static const CANConfig cancfg = { - CAN_MCR_ABOM | CAN_MCR_AWUM | CAN_MCR_TXFP, - CAN_BTR_LBKM | CAN_BTR_SJW(0) | CAN_BTR_TS2(1) | - CAN_BTR_TS1(8) | CAN_BTR_BRP(6) -}; - -/* - * Receiver thread. - */ -static WORKING_AREA(can_rx_wa, 256); -static msg_t can_rx(void *p) { - EventListener el; - CANRxFrame rxmsg; - - (void)p; - chRegSetThreadName("receiver"); - chEvtRegister(&CAND1.rxfull_event, &el, 0); - while(!chThdShouldTerminate()) { - if (chEvtWaitAnyTimeout(ALL_EVENTS, MS2ST(100)) == 0) - continue; - while (canReceive(&CAND1, CAN_ANY_MAILBOX, &rxmsg, TIME_IMMEDIATE) == RDY_OK) { - /* Process message.*/ - palTogglePad(GPIOE, GPIOE_LED3_RED); - } - } - chEvtUnregister(&CAND1.rxfull_event, &el); - return 0; -} - -/* - * Transmitter thread. - */ -static WORKING_AREA(can_tx_wa, 256); -static msg_t can_tx(void * p) { - CANTxFrame txmsg; - - (void)p; - chRegSetThreadName("transmitter"); - txmsg.IDE = CAN_IDE_EXT; - txmsg.EID = 0x01234567; - txmsg.RTR = CAN_RTR_DATA; - txmsg.DLC = 8; - txmsg.data32[0] = 0x55AA55AA; - txmsg.data32[1] = 0x00FF00FF; - - while (!chThdShouldTerminate()) { - canTransmit(&CAND1, CAN_ANY_MAILBOX, &txmsg, MS2ST(100)); - chThdSleepMilliseconds(500); - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the CAN driver 1. - */ - canStart(&CAND1, &cancfg); - - /* - * Starting the transmitter and receiver threads. - */ - chThdCreateStatic(can_rx_wa, sizeof(can_rx_wa), NORMALPRIO + 7, can_rx, NULL); - chThdCreateStatic(can_tx_wa, sizeof(can_tx_wa), NORMALPRIO + 7, can_tx, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F30x/CAN/mcuconf.h b/testhal/STM32F30x/CAN/mcuconf.h deleted file mode 100644 index 42fc2ed25..000000000 --- a/testhal/STM32F30x/CAN/mcuconf.h +++ /dev/null @@ -1,212 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F30x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC12_DMA_PRIORITY 2 -#define STM32_ADC_ADC34_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_DUAL_MODE FALSE - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 TRUE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F30x/CAN/readme.txt b/testhal/STM32F30x/CAN/readme.txt deleted file mode 100644 index 983b34d1d..000000000 --- a/testhal/STM32F30x/CAN/readme.txt +++ /dev/null @@ -1,26 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - CAN driver demo for STM32F30x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F3-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F30x CAN driver. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F30x/EXT/.cproject b/testhal/STM32F30x/EXT/.cproject deleted file mode 100644 index 81789e942..000000000 --- a/testhal/STM32F30x/EXT/.cproject +++ /dev/null @@ -1,50 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F30x/EXT/.project b/testhal/STM32F30x/EXT/.project deleted file mode 100644 index 7c6f467a6..000000000 --- a/testhal/STM32F30x/EXT/.project +++ /dev/null @@ -1,90 +0,0 @@ - - - STM32F30x-EXT - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32F3_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F30x/EXT/Makefile b/testhal/STM32F30x/EXT/Makefile deleted file mode 100644 index 8e7cec92d..000000000 --- a/testhal/STM32F30x/EXT/Makefile +++ /dev/null @@ -1,221 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32F3_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F30x/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F3xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F303xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/chprintf.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F30x/EXT/chconf.h b/testhal/STM32F30x/EXT/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F30x/EXT/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/EXT/halconf.h b/testhal/STM32F30x/EXT/halconf.h deleted file mode 100644 index e0e0c38ff..000000000 --- a/testhal/STM32F30x/EXT/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/EXT/main.c b/testhal/STM32F30x/EXT/main.c deleted file mode 100644 index 9ef548d87..000000000 --- a/testhal/STM32F30x/EXT/main.c +++ /dev/null @@ -1,101 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void led5off(void *arg) { - - (void)arg; - palClearPad(GPIOE, GPIOE_LED10_RED); -} - -/* Triggered when the button is pressed or released. The LED5 is set to ON.*/ -static void extcb1(EXTDriver *extp, expchannel_t channel) { - static VirtualTimer vt4; - - (void)extp; - (void)channel; - - palSetPad(GPIOE, GPIOE_LED10_RED); - chSysLockFromIsr(); - if (chVTIsArmedI(&vt4)) - chVTResetI(&vt4); - - /* LED4 set to OFF after 200mS.*/ - chVTSetI(&vt4, MS2ST(200), led5off, NULL); - chSysUnlockFromIsr(); -} - -static const EXTConfig extcfg = { - { - {EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOA, extcb1}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL} - } -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the EXT driver 1. - */ - extStart(&EXTD1, &extcfg); - - /* - * Normal main() thread activity, in this demo it enables and disables the - * button EXT channel using 5 seconds intervals. - */ - while (TRUE) { - chThdSleepMilliseconds(5000); - extChannelDisable(&EXTD1, 0); - chThdSleepMilliseconds(5000); - extChannelEnable(&EXTD1, 0); - } -} diff --git a/testhal/STM32F30x/EXT/mcuconf.h b/testhal/STM32F30x/EXT/mcuconf.h deleted file mode 100644 index 42fc2ed25..000000000 --- a/testhal/STM32F30x/EXT/mcuconf.h +++ /dev/null @@ -1,212 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F30x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC12_DMA_PRIORITY 2 -#define STM32_ADC_ADC34_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_DUAL_MODE FALSE - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 TRUE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F30x/EXT/readme.txt b/testhal/STM32F30x/EXT/readme.txt deleted file mode 100644 index 39255526b..000000000 --- a/testhal/STM32F30x/EXT/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - EXT driver demo for STM32F30x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F3-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F30x EXT driver. - -** Board Setup ** - -None required. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F30x/IRQ_STORM/.cproject b/testhal/STM32F30x/IRQ_STORM/.cproject deleted file mode 100644 index ed2858c43..000000000 --- a/testhal/STM32F30x/IRQ_STORM/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F30x/IRQ_STORM/.project b/testhal/STM32F30x/IRQ_STORM/.project deleted file mode 100644 index a7a6d0b2e..000000000 --- a/testhal/STM32F30x/IRQ_STORM/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F30x-IRQ_STORM - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32F3_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F30x/IRQ_STORM/Makefile b/testhal/STM32F30x/IRQ_STORM/Makefile deleted file mode 100644 index 455c2e5da..000000000 --- a/testhal/STM32F30x/IRQ_STORM/Makefile +++ /dev/null @@ -1,221 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32F3_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F30x/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F3xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F303xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various/devices_lib/accel \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F30x/IRQ_STORM/chconf.h b/testhal/STM32F30x/IRQ_STORM/chconf.h deleted file mode 100644 index 38242d75d..000000000 --- a/testhal/STM32F30x/IRQ_STORM/chconf.h +++ /dev/null @@ -1,533 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE FALSE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#define CORTEX_USE_FPU FALSE - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/IRQ_STORM/halconf.h b/testhal/STM32F30x/IRQ_STORM/halconf.h deleted file mode 100644 index 117a5979b..000000000 --- a/testhal/STM32F30x/IRQ_STORM/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/IRQ_STORM/main.c b/testhal/STM32F30x/IRQ_STORM/main.c deleted file mode 100644 index 2487373ca..000000000 --- a/testhal/STM32F30x/IRQ_STORM/main.c +++ /dev/null @@ -1,331 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include - -#include "ch.h" -#include "hal.h" - -/*===========================================================================*/ -/* Configurable settings. */ -/*===========================================================================*/ - -#ifndef RANDOMIZE -#define RANDOMIZE FALSE -#endif - -#ifndef ITERATIONS -#define ITERATIONS 100 -#endif - -#ifndef NUM_THREADS -#define NUM_THREADS 4 -#endif - -#ifndef MAILBOX_SIZE -#define MAILBOX_SIZE 4 -#endif - -/*===========================================================================*/ -/* Test related code. */ -/*===========================================================================*/ - -#define MSG_SEND_LEFT 0 -#define MSG_SEND_RIGHT 1 - -static bool_t saturated; - -/* - * Mailboxes and buffers. - */ -static Mailbox mb[NUM_THREADS]; -static msg_t b[NUM_THREADS][MAILBOX_SIZE]; - -/* - * Test worker threads. - */ -static WORKING_AREA(waWorkerThread[NUM_THREADS], 128); -static msg_t WorkerThread(void *arg) { - static volatile unsigned x = 0; - static unsigned cnt = 0; - unsigned me = (unsigned)arg; - unsigned target; - unsigned r; - msg_t msg; - - chRegSetThreadName("worker"); - - /* Work loop.*/ - while (TRUE) { - /* Waiting for a message.*/ - chMBFetch(&mb[me], &msg, TIME_INFINITE); - -#if RANDOMIZE - /* Pseudo-random delay.*/ - { - chSysLock(); - r = rand() & 15; - chSysUnlock(); - while (r--) - x++; - } -#else - /* Fixed delay.*/ - { - r = me >> 4; - while (r--) - x++; - } -#endif - - /* Deciding in which direction to re-send the message.*/ - if (msg == MSG_SEND_LEFT) - target = me - 1; - else - target = me + 1; - - if (target < NUM_THREADS) { - /* If this thread is not at the end of a chain re-sending the message, - note this check works because the variable target is unsigned.*/ - msg = chMBPost(&mb[target], msg, TIME_IMMEDIATE); - if (msg != RDY_OK) - saturated = TRUE; - } - else { - /* Provides a visual feedback about the system.*/ - if (++cnt >= 500) { - cnt = 0; - palTogglePad(GPIOE, GPIOE_LED10_RED); - } - } - } -} - -/* - * GPT2 callback. - */ -static void gpt2cb(GPTDriver *gptp) { - msg_t msg; - - (void)gptp; - chSysLockFromIsr(); - msg = chMBPostI(&mb[0], MSG_SEND_RIGHT); - if (msg != RDY_OK) - saturated = TRUE; - chSysUnlockFromIsr(); -} - -/* - * GPT3 callback. - */ -static void gpt3cb(GPTDriver *gptp) { - msg_t msg; - - (void)gptp; - chSysLockFromIsr(); - msg = chMBPostI(&mb[NUM_THREADS - 1], MSG_SEND_LEFT); - if (msg != RDY_OK) - saturated = TRUE; - chSysUnlockFromIsr(); -} - -/* - * GPT2 configuration. - */ -static const GPTConfig gpt2cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt2cb /* Timer callback.*/ -}; - -/* - * GPT3 configuration. - */ -static const GPTConfig gpt3cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt3cb /* Timer callback.*/ -}; - - -/*===========================================================================*/ -/* Generic demo code. */ -/*===========================================================================*/ - -static void print(char *p) { - - while (*p) { - chSequentialStreamPut(&SD1, *p++); - } -} - -static void println(char *p) { - - while (*p) { - chSequentialStreamPut(&SD1, *p++); - } - chSequentialStreamWrite(&SD1, (uint8_t *)"\r\n", 2); -} - -static void printn(uint32_t n) { - char buf[16], *p; - - if (!n) - chSequentialStreamPut(&SD1, '0'); - else { - p = buf; - while (n) - *p++ = (n % 10) + '0', n /= 10; - while (p > buf) - chSequentialStreamPut(&SD1, *--p); - } -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - gptcnt_t interval, threshold, worst; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the serial driver 1, PA9 and PA10 are routed to USART1. - */ - sdStart(&SD1, NULL); - palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(7)); /* USART1 TX. */ - palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(7)); /* USART1 RX. */ - - /* - * Activates GPTs. - */ - gptStart(&GPTD2, &gpt2cfg); - gptStart(&GPTD3, &gpt3cfg); - - /* - * Initializes the mailboxes and creates the worker threads. - */ - for (i = 0; i < NUM_THREADS; i++) { - chMBInit(&mb[i], b[i], MAILBOX_SIZE); - chThdCreateStatic(waWorkerThread[i], sizeof waWorkerThread[i], - NORMALPRIO - 20, WorkerThread, (void *)i); - } - - /* - * Test procedure. - */ - println(""); - println("*** ChibiOS/RT IRQ-STORM long duration test"); - println("***"); - print("*** Kernel: "); - println(CH_KERNEL_VERSION); - print("*** Compiled: "); - println(__DATE__ " - " __TIME__); -#ifdef CH_COMPILER_NAME - print("*** Compiler: "); - println(CH_COMPILER_NAME); -#endif - print("*** Architecture: "); - println(CH_ARCHITECTURE_NAME); -#ifdef CH_CORE_VARIANT_NAME - print("*** Core Variant: "); - println(CH_CORE_VARIANT_NAME); -#endif -#ifdef CH_PORT_INFO - print("*** Port Info: "); - println(CH_PORT_INFO); -#endif -#ifdef PLATFORM_NAME - print("*** Platform: "); - println(PLATFORM_NAME); -#endif -#ifdef BOARD_NAME - print("*** Test Board: "); - println(BOARD_NAME); -#endif - println("***"); - print("*** System Clock: "); - printn(STM32_SYSCLK); - println(""); - print("*** Iterations: "); - printn(ITERATIONS); - println(""); - print("*** Randomize: "); - printn(RANDOMIZE); - println(""); - print("*** Threads: "); - printn(NUM_THREADS); - println(""); - print("*** Mailbox size: "); - printn(MAILBOX_SIZE); - println(""); - - println(""); - worst = 0; - for (i = 1; i <= ITERATIONS; i++){ - print("Iteration "); - printn(i); - println(""); - saturated = FALSE; - threshold = 0; - for (interval = 2000; interval >= 10; interval -= interval / 10) { - gptStartContinuous(&GPTD2, interval - 1); /* Slightly out of phase.*/ - gptStartContinuous(&GPTD3, interval + 1); /* Slightly out of phase.*/ - chThdSleepMilliseconds(1000); - gptStopTimer(&GPTD2); - gptStopTimer(&GPTD3); - if (!saturated) - print("."); - else { - print("#"); - if (threshold == 0) - threshold = interval; - } - } - /* Gives the worker threads a chance to empty the mailboxes before next - cycle.*/ - chThdSleepMilliseconds(20); - println(""); - print("Saturated at "); - printn(threshold); - println(" uS"); - println(""); - if (threshold > worst) - worst = threshold; - } - gptStopTimer(&GPTD2); - gptStopTimer(&GPTD3); - - print("Worst case at "); - printn(worst); - println(" uS"); - println(""); - println("Test Complete"); - - /* - * Normal main() thread activity, nothing in this test. - */ - while (TRUE) { - chThdSleepMilliseconds(5000); - } -} diff --git a/testhal/STM32F30x/IRQ_STORM/mcuconf.h b/testhal/STM32F30x/IRQ_STORM/mcuconf.h deleted file mode 100644 index c660fc3f9..000000000 --- a/testhal/STM32F30x/IRQ_STORM/mcuconf.h +++ /dev/null @@ -1,212 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F30x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC12_DMA_PRIORITY 2 -#define STM32_ADC_ADC34_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_DUAL_MODE FALSE - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 TRUE -#define STM32_GPT_USE_TIM2 TRUE -#define STM32_GPT_USE_TIM3 TRUE -#define STM32_GPT_USE_TIM4 TRUE -#define STM32_GPT_USE_TIM8 TRUE -#define STM32_GPT_USE_TIM7 TRUE -#define STM32_GPT_USE_TIM8 TRUE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 6 -#define STM32_GPT_TIM3_IRQ_PRIORITY 10 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 TRUE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F30x/IRQ_STORM/readme.txt b/testhal/STM32F30x/IRQ_STORM/readme.txt deleted file mode 100644 index 5193c5f89..000000000 --- a/testhal/STM32F30x/IRQ_STORM/readme.txt +++ /dev/null @@ -1,32 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - IRQ_STORM stress test demo for STM32F30x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F3-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F30x GPT, PAL and Serial -drivers in order to implement a system stress demo. - -** Board Setup ** - -- Connect an RS232 transceiver to pins PA9(TX) and PA10(RX). -- Connect a terminal emulator to the transceiver (38400-N-8-1). - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F30x/PWM-ICU/.cproject b/testhal/STM32F30x/PWM-ICU/.cproject deleted file mode 100644 index 0bb5b2f00..000000000 --- a/testhal/STM32F30x/PWM-ICU/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F30x/PWM-ICU/.project b/testhal/STM32F30x/PWM-ICU/.project deleted file mode 100644 index 6d36832e8..000000000 --- a/testhal/STM32F30x/PWM-ICU/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F30x-PWM-ICU - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32F3_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F30x/PWM-ICU/Makefile b/testhal/STM32F30x/PWM-ICU/Makefile deleted file mode 100644 index 455c2e5da..000000000 --- a/testhal/STM32F30x/PWM-ICU/Makefile +++ /dev/null @@ -1,221 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32F3_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F30x/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F3xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F303xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various/devices_lib/accel \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F30x/PWM-ICU/chconf.h b/testhal/STM32F30x/PWM-ICU/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F30x/PWM-ICU/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/PWM-ICU/halconf.h b/testhal/STM32F30x/PWM-ICU/halconf.h deleted file mode 100644 index 2f74c82c8..000000000 --- a/testhal/STM32F30x/PWM-ICU/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU TRUE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/PWM-ICU/main.c b/testhal/STM32F30x/PWM-ICU/main.c deleted file mode 100644 index 01215fdda..000000000 --- a/testhal/STM32F30x/PWM-ICU/main.c +++ /dev/null @@ -1,138 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void pwmpcb(PWMDriver *pwmp) { - - (void)pwmp; - palClearPad(GPIOE, GPIOE_LED4_BLUE); -} - -static void pwmc1cb(PWMDriver *pwmp) { - - (void)pwmp; - palSetPad(GPIOE, GPIOE_LED4_BLUE); -} - -static PWMConfig pwmcfg = { - 10000, /* 10kHz PWM clock frequency. */ - 10000, /* Initial PWM period 1S. */ - pwmpcb, - { - {PWM_OUTPUT_ACTIVE_HIGH, pwmc1cb}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL} - }, - 0, -}; - -icucnt_t last_width, last_period; - -static void icuwidthcb(ICUDriver *icup) { - - palSetPad(GPIOE, GPIOE_LED9_BLUE); - last_width = icuGetWidth(icup); -} - -static void icuperiodcb(ICUDriver *icup) { - - palClearPad(GPIOE, GPIOE_LED9_BLUE); - last_period = icuGetPeriod(icup); -} - -static ICUConfig icucfg = { - ICU_INPUT_ACTIVE_HIGH, - 10000, /* 10kHz ICU clock frequency. */ - icuwidthcb, - icuperiodcb, - NULL, - ICU_CHANNEL_1 -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes the PWM driver 2 and ICU driver 3. - * GPIOA15 is the PWM output. - * GPIOC6 is the ICU input. - * The two pins have to be externally connected together. - */ - pwmStart(&PWMD2, &pwmcfg); - palSetPadMode(GPIOA, 15, PAL_MODE_ALTERNATE(1)); - icuStart(&ICUD3, &icucfg); - palSetPadMode(GPIOC, 6, PAL_MODE_ALTERNATE(2)); - icuEnable(&ICUD3); - chThdSleepMilliseconds(2000); - - /* - * Starts the PWM channel 0 using 75% duty cycle. - */ - pwmEnableChannel(&PWMD2, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD2, 7500)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 50% duty cycle. - */ - pwmEnableChannel(&PWMD2, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD2, 5000)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 25% duty cycle. - */ - pwmEnableChannel(&PWMD2, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD2, 2500)); - chThdSleepMilliseconds(5000); - - /* - * Changes PWM period to half second the duty cycle becomes 50% - * implicitly. - */ - pwmChangePeriod(&PWMD2, 5000); - chThdSleepMilliseconds(5000); - - /* - * Disables channel 0 and stops the drivers. - */ - pwmDisableChannel(&PWMD2, 0); - pwmStop(&PWMD2); - icuDisable(&ICUD3); - icuStop(&ICUD3); - palClearPad(GPIOE, GPIOE_LED4_BLUE); - palClearPad(GPIOE, GPIOE_LED9_BLUE); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F30x/PWM-ICU/mcuconf.h b/testhal/STM32F30x/PWM-ICU/mcuconf.h deleted file mode 100644 index ca40cb887..000000000 --- a/testhal/STM32F30x/PWM-ICU/mcuconf.h +++ /dev/null @@ -1,212 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F30x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC12_DMA_PRIORITY 2 -#define STM32_ADC_ADC34_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_DUAL_MODE FALSE - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 TRUE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 TRUE -#define STM32_ICU_USE_TIM4 TRUE -#define STM32_ICU_USE_TIM8 TRUE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 TRUE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F30x/PWM-ICU/readme.txt b/testhal/STM32F30x/PWM-ICU/readme.txt deleted file mode 100644 index cfb53f76a..000000000 --- a/testhal/STM32F30x/PWM-ICU/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - PWM-ICU drivers demo for STM32F30x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F3-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F30x PWM-ICU drivers. - -** Board Setup ** - -- Connect PA15 and PC6 together. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F30x/SPI/.cproject b/testhal/STM32F30x/SPI/.cproject deleted file mode 100644 index 104d73e64..000000000 --- a/testhal/STM32F30x/SPI/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F30x/SPI/.project b/testhal/STM32F30x/SPI/.project deleted file mode 100644 index 61b728dcf..000000000 --- a/testhal/STM32F30x/SPI/.project +++ /dev/null @@ -1,90 +0,0 @@ - - - STM32F30x-SPI - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j1 - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32F3_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F30x/SPI/Makefile b/testhal/STM32F30x/SPI/Makefile deleted file mode 100644 index 455c2e5da..000000000 --- a/testhal/STM32F30x/SPI/Makefile +++ /dev/null @@ -1,221 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32F3_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F30x/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F3xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F303xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various/devices_lib/accel \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F30x/SPI/chconf.h b/testhal/STM32F30x/SPI/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F30x/SPI/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/SPI/halconf.h b/testhal/STM32F30x/SPI/halconf.h deleted file mode 100644 index 3e1cafbbf..000000000 --- a/testhal/STM32F30x/SPI/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/SPI/main.c b/testhal/STM32F30x/SPI/main.c deleted file mode 100644 index aedae794a..000000000 --- a/testhal/STM32F30x/SPI/main.c +++ /dev/null @@ -1,162 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * Maximum speed SPI configuration (18MHz, CPHA=0, CPOL=0, MSb first). - */ -static const SPIConfig hs_spicfg = { - NULL, - GPIOB, - 12, - 0, - SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0 -}; - -/* - * Low speed SPI configuration (140.625kHz, CPHA=0, CPOL=0, MSb first). - */ -static const SPIConfig ls_spicfg = { - NULL, - GPIOB, - 12, - SPI_CR1_BR_2 | SPI_CR1_BR_1, - SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0 -}; - -/* - * SPI TX and RX buffers. - */ -static uint8_t txbuf[512]; -static uint8_t rxbuf[512]; - -/* - * SPI bus contender 1. - */ -static WORKING_AREA(spi_thread_1_wa, 256); -static msg_t spi_thread_1(void *p) { - - (void)p; - chRegSetThreadName("SPI thread 1"); - while (TRUE) { - spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ - palSetPad(GPIOE, GPIOE_LED10_RED); /* LED ON. */ - spiStart(&SPID2, &hs_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID2); /* Slave Select assertion. */ - spiExchange(&SPID2, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID2); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID2); /* Ownership release. */ - } - return 0; -} - -/* - * SPI bus contender 2. - */ -static WORKING_AREA(spi_thread_2_wa, 256); -static msg_t spi_thread_2(void *p) { - - (void)p; - chRegSetThreadName("SPI thread 2"); - while (TRUE) { - spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ - palClearPad(GPIOE, GPIOE_LED10_RED);/* LED OFF. */ - spiStart(&SPID2, &ls_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID2); /* Slave Select assertion. */ - spiExchange(&SPID2, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID2); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID2); /* Ownership release. */ - } - return 0; -} -/* - * This is a periodic thread that does absolutely nothing except flashing - * a LED. - */ -static WORKING_AREA(blinker_wa, 128); -static msg_t blinker(void *arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - palSetPad(GPIOE, GPIOE_LED3_RED); - chThdSleepMilliseconds(500); - palClearPad(GPIOE, GPIOE_LED3_RED); - chThdSleepMilliseconds(500); - } -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * SPI2 I/O pins setup. - */ - palSetPadMode(GPIOB, 13, PAL_MODE_ALTERNATE(5) | - PAL_STM32_OSPEED_HIGHEST); /* New SCK. */ - palSetPadMode(GPIOB, 14, PAL_MODE_ALTERNATE(5) | - PAL_STM32_OSPEED_HIGHEST); /* New MISO. */ - palSetPadMode(GPIOB, 15, PAL_MODE_ALTERNATE(5) | - PAL_STM32_OSPEED_HIGHEST); /* New MOSI. */ - palSetPadMode(GPIOB, 12, PAL_MODE_OUTPUT_PUSHPULL | - PAL_STM32_OSPEED_HIGHEST); /* New CS. */ - palSetPad(GPIOB, 12); - - /* - * Prepare transmit pattern. - */ - for (i = 0; i < sizeof(txbuf); i++) - txbuf[i] = (uint8_t)i; - - /* - * Starting the transmitter and receiver threads. - */ - chThdCreateStatic(spi_thread_1_wa, sizeof(spi_thread_1_wa), - NORMALPRIO + 1, spi_thread_1, NULL); - chThdCreateStatic(spi_thread_2_wa, sizeof(spi_thread_2_wa), - NORMALPRIO + 1, spi_thread_2, NULL); - - /* - * Starting the blinker thread. - */ - chThdCreateStatic(blinker_wa, sizeof(blinker_wa), - NORMALPRIO-1, blinker, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F30x/SPI/mcuconf.h b/testhal/STM32F30x/SPI/mcuconf.h deleted file mode 100644 index 1768aa8db..000000000 --- a/testhal/STM32F30x/SPI/mcuconf.h +++ /dev/null @@ -1,212 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F30x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC12_DMA_PRIORITY 2 -#define STM32_ADC_ADC34_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_DUAL_MODE FALSE - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F30x/SPI/readme.txt b/testhal/STM32F30x/SPI/readme.txt deleted file mode 100644 index 9275c06ee..000000000 --- a/testhal/STM32F30x/SPI/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - SPI driver demo for STM32F30x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an ST STM32F3-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F30x SPI driver. - -** Board Setup ** - -- Connect PB14 and PB15 together for SPI loop-back. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F30x/UART/.cproject b/testhal/STM32F30x/UART/.cproject deleted file mode 100644 index 661d548d0..000000000 --- a/testhal/STM32F30x/UART/.cproject +++ /dev/null @@ -1,50 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F30x/UART/.project b/testhal/STM32F30x/UART/.project deleted file mode 100644 index 24b9d53ce..000000000 --- a/testhal/STM32F30x/UART/.project +++ /dev/null @@ -1,90 +0,0 @@ - - - STM32F30x-UART - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32F3_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F30x/UART/Makefile b/testhal/STM32F30x/UART/Makefile deleted file mode 100644 index 8e7cec92d..000000000 --- a/testhal/STM32F30x/UART/Makefile +++ /dev/null @@ -1,221 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32F3_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F30x/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F3xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F303xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/chprintf.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F30x/UART/chconf.h b/testhal/STM32F30x/UART/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F30x/UART/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/UART/halconf.h b/testhal/STM32F30x/UART/halconf.h deleted file mode 100644 index a4fc70926..000000000 --- a/testhal/STM32F30x/UART/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART TRUE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/UART/main.c b/testhal/STM32F30x/UART/main.c deleted file mode 100644 index 9d0bea53c..000000000 --- a/testhal/STM32F30x/UART/main.c +++ /dev/null @@ -1,144 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static VirtualTimer vt1, vt2; - -static void restart(void *p) { - - (void)p; - - chSysLockFromIsr(); - uartStartSendI(&UARTD1, 14, "Hello World!\r\n"); - chSysUnlockFromIsr(); -} - -static void ledoff(void *p) { - - (void)p; - palClearPad(GPIOE, GPIOE_LED3_RED); -} - -/* - * This callback is invoked when a transmission buffer has been completely - * read by the driver. - */ -static void txend1(UARTDriver *uartp) { - - (void)uartp; - palSetPad(GPIOE, GPIOE_LED3_RED); -} - -/* - * This callback is invoked when a transmission has physically completed. - */ -static void txend2(UARTDriver *uartp) { - - (void)uartp; - palClearPad(GPIOE, GPIOE_LED3_RED); - chSysLockFromIsr(); - if (chVTIsArmedI(&vt1)) - chVTResetI(&vt1); - chVTSetI(&vt1, MS2ST(5000), restart, NULL); - chSysUnlockFromIsr(); -} - -/* - * This callback is invoked on a receive error, the errors mask is passed - * as parameter. - */ -static void rxerr(UARTDriver *uartp, uartflags_t e) { - - (void)uartp; - (void)e; -} - -/* - * This callback is invoked when a character is received but the application - * was not ready to receive it, the character is passed as parameter. - */ -static void rxchar(UARTDriver *uartp, uint16_t c) { - - (void)uartp; - (void)c; - /* Flashing the LED each time a character is received.*/ - palSetPad(GPIOE, GPIOE_LED3_RED); - chSysLockFromIsr(); - if (chVTIsArmedI(&vt2)) - chVTResetI(&vt2); - chVTSetI(&vt2, MS2ST(200), ledoff, NULL); - chSysUnlockFromIsr(); -} - -/* - * This callback is invoked when a receive buffer has been completely written. - */ -static void rxend(UARTDriver *uartp) { - - (void)uartp; -} - -/* - * UART driver configuration structure. - */ -static UARTConfig uart_cfg_1 = { - txend1, - txend2, - rxend, - rxchar, - rxerr, - 38400, - 0, - USART_CR2_LINEN, - 0 -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the serial driver 1, PA9 and PA10 are routed to USART1. - */ - uartStart(&UARTD1, &uart_cfg_1); - palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(7)); /* USART1 TX. */ - palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(7)); /* USART1 RX. */ - - /* - * Starts the transmission, it will be handled entirely in background. - */ - uartStartSend(&UARTD1, 13, "Starting...\r\n"); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } -} diff --git a/testhal/STM32F30x/UART/mcuconf.h b/testhal/STM32F30x/UART/mcuconf.h deleted file mode 100644 index 0eaddf96a..000000000 --- a/testhal/STM32F30x/UART/mcuconf.h +++ /dev/null @@ -1,212 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F30x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC12_DMA_PRIORITY 2 -#define STM32_ADC_ADC34_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_DUAL_MODE FALSE - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 TRUE -#define STM32_UART_USE_USART2 TRUE -#define STM32_UART_USE_USART3 TRUE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F30x/UART/readme.txt b/testhal/STM32F30x/UART/readme.txt deleted file mode 100644 index 3f55599a8..000000000 --- a/testhal/STM32F30x/UART/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - UART driver demo for STM32F30x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F3-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F30x UART driver. - -** Board Setup ** - -- Connect an RS232 transceiver to pins PA9(TX) and PA10(RX). -- Connect a terminal emulator to the transceiver (38400-N-8-1). - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F30x/USB_CDC/.cproject b/testhal/STM32F30x/USB_CDC/.cproject deleted file mode 100644 index 839c40d30..000000000 --- a/testhal/STM32F30x/USB_CDC/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F30x/USB_CDC/.project b/testhal/STM32F30x/USB_CDC/.project deleted file mode 100644 index a1dcbcd63..000000000 --- a/testhal/STM32F30x/USB_CDC/.project +++ /dev/null @@ -1,43 +0,0 @@ - - - STM32F30x-USB_CDC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32F3_DISCOVERY - - - os - 2 - CHIBIOS/os - - - test - 2 - CHIBIOS/test - - - diff --git a/testhal/STM32F30x/USB_CDC/Makefile b/testhal/STM32F30x/USB_CDC/Makefile deleted file mode 100644 index 1f03d2992..000000000 --- a/testhal/STM32F30x/USB_CDC/Makefile +++ /dev/null @@ -1,222 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32F3_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F30x/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F3xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F303xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/shell.c \ - $(CHIBIOS)/os/various/chprintf.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F30x/USB_CDC/chconf.h b/testhal/STM32F30x/USB_CDC/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F30x/USB_CDC/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/USB_CDC/halconf.h b/testhal/STM32F30x/USB_CDC/halconf.h deleted file mode 100644 index cd76b0cfe..000000000 --- a/testhal/STM32F30x/USB_CDC/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F30x/USB_CDC/main.c b/testhal/STM32F30x/USB_CDC/main.c deleted file mode 100644 index 6555da8d3..000000000 --- a/testhal/STM32F30x/USB_CDC/main.c +++ /dev/null @@ -1,516 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include -#include - -#include "ch.h" -#include "hal.h" -#include "test.h" - -#include "shell.h" -#include "chprintf.h" - -/*===========================================================================*/ -/* USB related stuff. */ -/*===========================================================================*/ - -/* - * Endpoints to be used for USBD1. - */ -#define USBD1_DATA_REQUEST_EP 1 -#define USBD1_DATA_AVAILABLE_EP 1 -#define USBD1_INTERRUPT_REQUEST_EP 2 - -/* - * DP resistor control is not possible on the STM32F3-Discovery, using stubs - * for the connection macros. - */ -#define usb_lld_connect_bus(usbp) -#define usb_lld_disconnect_bus(usbp) - -/* - * Serial over USB Driver structure. - */ -static SerialUSBDriver SDU1; - -/* - * USB Device Descriptor. - */ -static const uint8_t vcom_device_descriptor_data[18] = { - USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ - 0x02, /* bDeviceClass (CDC). */ - 0x00, /* bDeviceSubClass. */ - 0x00, /* bDeviceProtocol. */ - 0x40, /* bMaxPacketSize. */ - 0x0483, /* idVendor (ST). */ - 0x5740, /* idProduct. */ - 0x0200, /* bcdDevice. */ - 1, /* iManufacturer. */ - 2, /* iProduct. */ - 3, /* iSerialNumber. */ - 1) /* bNumConfigurations. */ -}; - -/* - * Device Descriptor wrapper. - */ -static const USBDescriptor vcom_device_descriptor = { - sizeof vcom_device_descriptor_data, - vcom_device_descriptor_data -}; - -/* Configuration Descriptor tree for a CDC.*/ -static const uint8_t vcom_configuration_descriptor_data[67] = { - /* Configuration Descriptor.*/ - USB_DESC_CONFIGURATION(67, /* wTotalLength. */ - 0x02, /* bNumInterfaces. */ - 0x01, /* bConfigurationValue. */ - 0, /* iConfiguration. */ - 0xC0, /* bmAttributes (self powered). */ - 50), /* bMaxPower (100mA). */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x01, /* bNumEndpoints. */ - 0x02, /* bInterfaceClass (Communications - Interface Class, CDC section - 4.2). */ - 0x02, /* bInterfaceSubClass (Abstract - Control Model, CDC section 4.3). */ - 0x01, /* bInterfaceProtocol (AT commands, - CDC section 4.4). */ - 0), /* iInterface. */ - /* Header Functional Descriptor (CDC section 5.2.3).*/ - USB_DESC_BYTE (5), /* bLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header - Functional Descriptor. */ - USB_DESC_BCD (0x0110), /* bcdCDC. */ - /* Call Management Functional Descriptor. */ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */ - USB_DESC_BYTE (0x01), /* bDataInterface. */ - /* ACM Functional Descriptor.*/ - USB_DESC_BYTE (4), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract - Control Management Descriptor). */ - USB_DESC_BYTE (0x02), /* bmCapabilities. */ - /* Union Functional Descriptor.*/ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bMasterInterface (Communication - Class Interface). */ - USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class - Interface). */ - /* Endpoint 2 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_INTERRUPT_REQUEST_EP|0x80, - 0x03, /* bmAttributes (Interrupt). */ - 0x0008, /* wMaxPacketSize. */ - 0xFF), /* bInterval. */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x02, /* bNumEndpoints. */ - 0x0A, /* bInterfaceClass (Data Class - Interface, CDC section 4.5). */ - 0x00, /* bInterfaceSubClass (CDC section - 4.6). */ - 0x00, /* bInterfaceProtocol (CDC section - 4.7). */ - 0x00), /* iInterface. */ - /* Endpoint 3 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00), /* bInterval. */ - /* Endpoint 1 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00) /* bInterval. */ -}; - -/* - * Configuration Descriptor wrapper. - */ -static const USBDescriptor vcom_configuration_descriptor = { - sizeof vcom_configuration_descriptor_data, - vcom_configuration_descriptor_data -}; - -/* - * U.S. English language identifier. - */ -static const uint8_t vcom_string0[] = { - USB_DESC_BYTE(4), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ -}; - -/* - * Vendor string. - */ -static const uint8_t vcom_string1[] = { - USB_DESC_BYTE(38), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0, - 'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0, - 'c', 0, 's', 0 -}; - -/* - * Device Description string. - */ -static const uint8_t vcom_string2[] = { - USB_DESC_BYTE(56), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0, - 'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0, - 'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0, - 'o', 0, 'r', 0, 't', 0 -}; - -/* - * Serial Number string. - */ -static const uint8_t vcom_string3[] = { - USB_DESC_BYTE(8), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - '0' + CH_KERNEL_MAJOR, 0, - '0' + CH_KERNEL_MINOR, 0, - '0' + CH_KERNEL_PATCH, 0 -}; - -/* - * Strings wrappers array. - */ -static const USBDescriptor vcom_strings[] = { - {sizeof vcom_string0, vcom_string0}, - {sizeof vcom_string1, vcom_string1}, - {sizeof vcom_string2, vcom_string2}, - {sizeof vcom_string3, vcom_string3} -}; - -/* - * Handles the GET_DESCRIPTOR callback. All required descriptors must be - * handled here. - */ -static const USBDescriptor *get_descriptor(USBDriver *usbp, - uint8_t dtype, - uint8_t dindex, - uint16_t lang) { - - (void)usbp; - (void)lang; - switch (dtype) { - case USB_DESCRIPTOR_DEVICE: - return &vcom_device_descriptor; - case USB_DESCRIPTOR_CONFIGURATION: - return &vcom_configuration_descriptor; - case USB_DESCRIPTOR_STRING: - if (dindex < 4) - return &vcom_strings[dindex]; - } - return NULL; -} - -/** - * @brief IN EP1 state. - */ -static USBInEndpointState ep1instate; - -/** - * @brief OUT EP1 state. - */ -static USBOutEndpointState ep1outstate; - -/** - * @brief EP1 initialization structure (both IN and OUT). - */ -static const USBEndpointConfig ep1config = { - USB_EP_MODE_TYPE_BULK, - NULL, - sduDataTransmitted, - sduDataReceived, - 0x0040, - 0x0040, - &ep1instate, - &ep1outstate, - 1, - NULL -}; - -/** - * @brief IN EP2 state. - */ -static USBInEndpointState ep2instate; - -/** - * @brief EP2 initialization structure (IN only). - */ -static const USBEndpointConfig ep2config = { - USB_EP_MODE_TYPE_INTR, - NULL, - sduInterruptTransmitted, - NULL, - 0x0010, - 0x0000, - &ep2instate, - NULL, - 1, - NULL -}; - -/* - * Handles the USB driver global events. - */ -static void usb_event(USBDriver *usbp, usbevent_t event) { - - switch (event) { - case USB_EVENT_RESET: - return; - case USB_EVENT_ADDRESS: - return; - case USB_EVENT_CONFIGURED: - chSysLockFromIsr(); - - /* Enables the endpoints specified into the configuration. - Note, this callback is invoked from an ISR so I-Class functions - must be used.*/ - usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config); - usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config); - - /* Resetting the state of the CDC subsystem.*/ - sduConfigureHookI(&SDU1); - - chSysUnlockFromIsr(); - return; - case USB_EVENT_SUSPEND: - return; - case USB_EVENT_WAKEUP: - return; - case USB_EVENT_STALLED: - return; - } - return; -} - -/* - * USB driver configuration. - */ -static const USBConfig usbcfg = { - usb_event, - get_descriptor, - sduRequestsHook, - NULL -}; - -/* - * Serial over USB driver configuration. - */ -static const SerialUSBConfig serusbcfg = { - &USBD1, - USBD1_DATA_REQUEST_EP, - USBD1_DATA_AVAILABLE_EP, - USBD1_INTERRUPT_REQUEST_EP -}; - -/*===========================================================================*/ -/* Command line related. */ -/*===========================================================================*/ - -#define SHELL_WA_SIZE THD_WA_SIZE(2048) -#define TEST_WA_SIZE THD_WA_SIZE(256) - -static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) { - size_t n, size; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: mem\r\n"); - return; - } - n = chHeapStatus(NULL, &size); - chprintf(chp, "core free memory : %u bytes\r\n", chCoreStatus()); - chprintf(chp, "heap fragments : %u\r\n", n); - chprintf(chp, "heap free total : %u bytes\r\n", size); -} - -static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) { - static const char *states[] = {THD_STATE_NAMES}; - Thread *tp; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: threads\r\n"); - return; - } - chprintf(chp, " addr stack prio refs state time\r\n"); - tp = chRegFirstThread(); - do { - chprintf(chp, "%.8lx %.8lx %4lu %4lu %9s %lu\r\n", - (uint32_t)tp, (uint32_t)tp->p_ctx.r13, - (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1), - states[tp->p_state], (uint32_t)tp->p_time); - tp = chRegNextThread(tp); - } while (tp != NULL); -} - -static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) { - Thread *tp; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: test\r\n"); - return; - } - tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriority(), - TestThread, chp); - if (tp == NULL) { - chprintf(chp, "out of memory\r\n"); - return; - } - chThdWait(tp); -} - -static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) { - static uint8_t buf[] = - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: write\r\n"); - return; - } - - while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) { - chSequentialStreamWrite(&SDU1, buf, sizeof buf - 1); - } - chprintf(chp, "\r\n\nstopped\r\n"); -} - -static const ShellCommand commands[] = { - {"mem", cmd_mem}, - {"threads", cmd_threads}, - {"test", cmd_test}, - {"write", cmd_write}, - {NULL, NULL} -}; - -static const ShellConfig shell_cfg1 = { - (BaseSequentialStream *)&SDU1, - commands -}; - -/*===========================================================================*/ -/* Generic code. */ -/*===========================================================================*/ - -/* - * Red LED blinker thread, times are in milliseconds. - */ -static WORKING_AREA(waThread1, 128); -static msg_t Thread1(void *arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - systime_t time = serusbcfg.usbp->state == USB_ACTIVE ? 250 : 500; - palClearPad(GPIOE, GPIOE_LED3_RED); - chThdSleepMilliseconds(time); - palSetPad(GPIOE, GPIOE_LED3_RED); - chThdSleepMilliseconds(time); - } -} - -/* - * Application entry point. - */ -int main(void) { - Thread *shelltp = NULL; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes a serial-over-USB CDC driver. - */ - sduObjectInit(&SDU1); - sduStart(&SDU1, &serusbcfg); - - /* - * Activates the USB driver and then the USB bus pull-up on D+. - * Note, a delay is inserted in order to not have to disconnect the cable - * after a reset. - */ - usbDisconnectBus(serusbcfg.usbp); - chThdSleepMilliseconds(1500); - usbStart(serusbcfg.usbp, &usbcfg); - usbConnectBus(serusbcfg.usbp); - - /* - * Shell manager initialization. - */ - shellInit(); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing except - * sleeping in a loop and check the button state. - */ - while (TRUE) { - if (!shelltp && (SDU1.config->usbp->state == USB_ACTIVE)) - shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO); - else if (chThdTerminated(shelltp)) { - chThdRelease(shelltp); /* Recovers memory of the previous shell. */ - shelltp = NULL; /* Triggers spawning of a new shell. */ - } - chThdSleepMilliseconds(1000); - } -} diff --git a/testhal/STM32F30x/USB_CDC/mcuconf.h b/testhal/STM32F30x/USB_CDC/mcuconf.h deleted file mode 100644 index c0a1aaa0f..000000000 --- a/testhal/STM32F30x/USB_CDC/mcuconf.h +++ /dev/null @@ -1,212 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F30x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC12_DMA_PRIORITY 2 -#define STM32_ADC_ADC34_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC34_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_DUAL_MODE FALSE - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F30x/USB_CDC/readme.txt b/testhal/STM32F30x/USB_CDC/readme.txt deleted file mode 100644 index 39055f999..000000000 --- a/testhal/STM32F30x/USB_CDC/readme.txt +++ /dev/null @@ -1,26 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - USB-CDC driver demo for STM32F30x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an ST STM32F3-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F30x USB driver. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F37x/ADC/.cproject b/testhal/STM32F37x/ADC/.cproject deleted file mode 100644 index 2230bab81..000000000 --- a/testhal/STM32F37x/ADC/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F37x/ADC/.project b/testhal/STM32F37x/ADC/.project deleted file mode 100644 index cf24ffaeb..000000000 --- a/testhal/STM32F37x/ADC/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F37x-ADC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32373C_EVAL - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F37x/ADC/Makefile b/testhal/STM32F37x/ADC/Makefile deleted file mode 100644 index 684302ce4..000000000 --- a/testhal/STM32F37x/ADC/Makefile +++ /dev/null @@ -1,220 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32373C_EVAL/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F37x/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F3xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F373xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F37x/ADC/chconf.h b/testhal/STM32F37x/ADC/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F37x/ADC/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/ADC/halconf.h b/testhal/STM32F37x/ADC/halconf.h deleted file mode 100644 index 85a5dbd3b..000000000 --- a/testhal/STM32F37x/ADC/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC TRUE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/ADC/main.c b/testhal/STM32F37x/ADC/main.c deleted file mode 100644 index b9a481825..000000000 --- a/testhal/STM32F37x/ADC/main.c +++ /dev/null @@ -1,172 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#define ADC_GRP1_NUM_CHANNELS 2 -#define ADC_GRP1_BUF_DEPTH 8 - -#define ADC_GRP2_NUM_CHANNELS 8 -#define ADC_GRP2_BUF_DEPTH 16 - -static adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH]; -static adcsample_t samples2[ADC_GRP2_NUM_CHANNELS * ADC_GRP2_BUF_DEPTH]; - -/* - * ADC streaming callback. - */ -size_t nx = 0, ny = 0; -static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) { - - (void)adcp; - if (samples2 == buffer) { - nx += n; - } - else { - ny += n; - } -} - -static void adcerrorcallback(ADCDriver *adcp, adcerror_t err) { - - (void)adcp; - (void)err; -} - -/* - * ADC conversion group. - * Mode: Linear buffer, 8 samples of 2 channels, SW triggered. - * Channels: IN1, IN9. - */ -static const ADCConversionGroup adcgrpcfg1 = { - FALSE, - ADC_GRP1_NUM_CHANNELS, - NULL, - adcerrorcallback, - .u.adc = { - 0, /* CR1 */ - ADC_CR2_SWSTART, /* CR2 */ - 0, /* LTR */ - 0, /* HTR */ - { /* SMPR[2] */ - 0, - ADC_SMPR2_SMP_AN9(ADC_SAMPLE_41P5) | ADC_SMPR2_SMP_AN1(ADC_SAMPLE_41P5), - }, - { /* SQR[3] */ - 0, - 0, - ADC_SQR3_SQ2_N(ADC_CHANNEL_IN9) | ADC_SQR3_SQ1_N(ADC_CHANNEL_IN1) - } - } -}; - -/* - * ADC conversion group. - * Mode: Continuous, 16 samples of 8 channels, SW triggered. - * Channels: IN1, IN9, IN1, IN9, IN1, IN9, VBat, Sensor. - */ -static const ADCConversionGroup adcgrpcfg2 = { - TRUE, - ADC_GRP2_NUM_CHANNELS, - adccallback, - adcerrorcallback, - .u.adc = { - 0, /* CR1 */ - ADC_CR2_SWSTART, /* CR2 */ - 0, /* LTR */ - 0, /* HTR */ - { /* SMPR[2] */ - ADC_SMPR1_SMP_SENSOR(ADC_SAMPLE_239P5) | ADC_SMPR1_SMP_VREF(ADC_SAMPLE_239P5), - ADC_SMPR2_SMP_AN9(ADC_SAMPLE_41P5) | ADC_SMPR2_SMP_AN1(ADC_SAMPLE_41P5) - }, - { /* SQR[3] */ - 0, - ADC_SQR2_SQ8_N(ADC_CHANNEL_SENSOR) | ADC_SQR2_SQ7_N(ADC_CHANNEL_VBAT), - ADC_SQR3_SQ6_N(ADC_CHANNEL_IN9) | ADC_SQR3_SQ5_N(ADC_CHANNEL_IN1) | - ADC_SQR3_SQ4_N(ADC_CHANNEL_IN9) | ADC_SQR3_SQ3_N(ADC_CHANNEL_IN1) | - ADC_SQR3_SQ2_N(ADC_CHANNEL_IN9) | ADC_SQR3_SQ1_N(ADC_CHANNEL_IN1) - } - } -}; - -/* - * Red LEDs blinker thread, times are in milliseconds. - */ -static WORKING_AREA(waThread1, 128); -static msg_t Thread1(void *arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - palClearPad(GPIOC, GPIOC_LED1); - chThdSleepMilliseconds(500); - palSetPad(GPIOC, GPIOC_LED1); - chThdSleepMilliseconds(500); - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Activates the ADC1 driver, the temperature sensor and the VBat - * measurement. - */ - adcStart(&ADCD1, NULL); - adcSTM32Calibrate(&ADCD1); - adcSTM32EnableTSVREFE(); - adcSTM32EnableVBATE(); - - /* - * Linear conversion. - */ - adcConvert(&ADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH); - chThdSleepMilliseconds(1000); - - /* - * Starts an ADC continuous conversion. - */ - adcStartConversion(&ADCD1, &adcgrpcfg2, samples2, ADC_GRP2_BUF_DEPTH); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - if (palReadPad(GPIOA, GPIOA_WKUP_BUTTON)) { - adcStopConversion(&ADCD1); - } - chThdSleepMilliseconds(500); - } -} diff --git a/testhal/STM32F37x/ADC/mcuconf.h b/testhal/STM32F37x/ADC/mcuconf.h deleted file mode 100644 index 7cdc9bf4a..000000000 --- a/testhal/STM32F37x/ADC/mcuconf.h +++ /dev/null @@ -1,209 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F37x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_SDPRE STM32_SDPRE_DIV12 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 TRUE -#define STM32_ADC_USE_SDADC1 FALSE -#define STM32_ADC_USE_SDADC2 FALSE -#define STM32_ADC_USE_SDADC3 FALSE -#define STM32_ADC_SDADC_SLOW_MODE FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC2_DMA_PRIORITY 2 -#define STM32_ADC_SDADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_DMA_IRQ_PRIORITY 5 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 TRUE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_23_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F37x/ADC/readme.txt b/testhal/STM32F37x/ADC/readme.txt deleted file mode 100644 index 8cb97fdc2..000000000 --- a/testhal/STM32F37x/ADC/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - ADC driver demo for STM32F37x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32373C-EVAL board. - -** The Demo ** - -The application demonstrates the use of the STM32F37x ADC driver on the -ADC peripheral. - -** Board Setup ** - -None. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F37x/CAN/.cproject b/testhal/STM32F37x/CAN/.cproject deleted file mode 100644 index a6eeccae8..000000000 --- a/testhal/STM32F37x/CAN/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F37x/CAN/.project b/testhal/STM32F37x/CAN/.project deleted file mode 100644 index d26e9f35e..000000000 --- a/testhal/STM32F37x/CAN/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F37x-CAN - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32373C_EVAL - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F37x/CAN/Makefile b/testhal/STM32F37x/CAN/Makefile deleted file mode 100644 index 782a3b3d7..000000000 --- a/testhal/STM32F37x/CAN/Makefile +++ /dev/null @@ -1,221 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32373C_EVAL/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F37x/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F3xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F373xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various/devices_lib/accel \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F37x/CAN/chconf.h b/testhal/STM32F37x/CAN/chconf.h deleted file mode 100644 index f943ea80c..000000000 --- a/testhal/STM32F37x/CAN/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE FALSE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/CAN/halconf.h b/testhal/STM32F37x/CAN/halconf.h deleted file mode 100644 index 5b6535967..000000000 --- a/testhal/STM32F37x/CAN/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN TRUE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/CAN/main.c b/testhal/STM32F37x/CAN/main.c deleted file mode 100644 index 12e0c4650..000000000 --- a/testhal/STM32F37x/CAN/main.c +++ /dev/null @@ -1,109 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * Internal loopback mode, 500KBaud, automatic wakeup, automatic recover - * from abort mode. - */ -static const CANConfig cancfg = { - CAN_MCR_ABOM | CAN_MCR_AWUM | CAN_MCR_TXFP, - CAN_BTR_LBKM | CAN_BTR_SJW(0) | CAN_BTR_TS2(1) | - CAN_BTR_TS1(8) | CAN_BTR_BRP(6) -}; - -/* - * Receiver thread. - */ -static WORKING_AREA(can_rx_wa, 256); -static msg_t can_rx(void *p) { - EventListener el; - CANRxFrame rxmsg; - - (void)p; - chRegSetThreadName("receiver"); - chEvtRegister(&CAND1.rxfull_event, &el, 0); - while(!chThdShouldTerminate()) { - if (chEvtWaitAnyTimeout(ALL_EVENTS, MS2ST(100)) == 0) - continue; - while (canReceive(&CAND1, CAN_ANY_MAILBOX, &rxmsg, TIME_IMMEDIATE) == RDY_OK) { - /* Process message.*/ - palTogglePad(GPIOC, GPIOC_LED1); - } - } - chEvtUnregister(&CAND1.rxfull_event, &el); - return 0; -} - -/* - * Transmitter thread. - */ -static WORKING_AREA(can_tx_wa, 256); -static msg_t can_tx(void * p) { - CANTxFrame txmsg; - - (void)p; - chRegSetThreadName("transmitter"); - txmsg.IDE = CAN_IDE_EXT; - txmsg.EID = 0x01234567; - txmsg.RTR = CAN_RTR_DATA; - txmsg.DLC = 8; - txmsg.data32[0] = 0x55AA55AA; - txmsg.data32[1] = 0x00FF00FF; - - while (!chThdShouldTerminate()) { - canTransmit(&CAND1, CAN_ANY_MAILBOX, &txmsg, MS2ST(100)); - chThdSleepMilliseconds(500); - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the CAN driver 1. - */ - canStart(&CAND1, &cancfg); - - /* - * Starting the transmitter and receiver threads. - */ - chThdCreateStatic(can_rx_wa, sizeof(can_rx_wa), NORMALPRIO + 7, can_rx, NULL); - chThdCreateStatic(can_tx_wa, sizeof(can_tx_wa), NORMALPRIO + 7, can_tx, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F37x/CAN/mcuconf.h b/testhal/STM32F37x/CAN/mcuconf.h deleted file mode 100644 index 1434b2fae..000000000 --- a/testhal/STM32F37x/CAN/mcuconf.h +++ /dev/null @@ -1,208 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F37x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_SDPRE STM32_SDPRE_DIV12 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_SDADC1 FALSE -#define STM32_ADC_USE_SDADC2 FALSE -#define STM32_ADC_USE_SDADC3 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC2_DMA_PRIORITY 2 -#define STM32_ADC_SDADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_DMA_IRQ_PRIORITY 5 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 TRUE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_23_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F37x/CAN/readme.txt b/testhal/STM32F37x/CAN/readme.txt deleted file mode 100644 index 9acc1deee..000000000 --- a/testhal/STM32F37x/CAN/readme.txt +++ /dev/null @@ -1,26 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - CAN driver demo for STM32F37x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32373C-EVAL board. - -** The Demo ** - -The application demonstrates the use of the STM32F37x CAN driver. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F37x/EXT/.cproject b/testhal/STM32F37x/EXT/.cproject deleted file mode 100644 index 420df3639..000000000 --- a/testhal/STM32F37x/EXT/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F37x/EXT/.project b/testhal/STM32F37x/EXT/.project deleted file mode 100644 index e64b8406f..000000000 --- a/testhal/STM32F37x/EXT/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F37x-EXT - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32373C_EVAL - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F37x/EXT/Makefile b/testhal/STM32F37x/EXT/Makefile deleted file mode 100644 index 782a3b3d7..000000000 --- a/testhal/STM32F37x/EXT/Makefile +++ /dev/null @@ -1,221 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32373C_EVAL/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F37x/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F3xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F373xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various/devices_lib/accel \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F37x/EXT/chconf.h b/testhal/STM32F37x/EXT/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F37x/EXT/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/EXT/halconf.h b/testhal/STM32F37x/EXT/halconf.h deleted file mode 100644 index e0e0c38ff..000000000 --- a/testhal/STM32F37x/EXT/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/EXT/main.c b/testhal/STM32F37x/EXT/main.c deleted file mode 100644 index 7c158e306..000000000 --- a/testhal/STM32F37x/EXT/main.c +++ /dev/null @@ -1,101 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void led5off(void *arg) { - - (void)arg; - palClearPad(GPIOC, GPIOC_LED1); -} - -/* Triggered when the button is pressed or released. The LED5 is set to ON.*/ -static void extcb1(EXTDriver *extp, expchannel_t channel) { - static VirtualTimer vt4; - - (void)extp; - (void)channel; - - palSetPad(GPIOC, GPIOC_LED1); - chSysLockFromIsr(); - if (chVTIsArmedI(&vt4)) - chVTResetI(&vt4); - - /* LED4 set to OFF after 200mS.*/ - chVTSetI(&vt4, MS2ST(200), led5off, NULL); - chSysUnlockFromIsr(); -} - -static const EXTConfig extcfg = { - { - {EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOA, extcb1}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL} - } -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the EXT driver 1. - */ - extStart(&EXTD1, &extcfg); - - /* - * Normal main() thread activity, in this demo it enables and disables the - * button EXT channel using 5 seconds intervals. - */ - while (TRUE) { - chThdSleepMilliseconds(5000); - extChannelDisable(&EXTD1, 0); - chThdSleepMilliseconds(5000); - extChannelEnable(&EXTD1, 0); - } -} diff --git a/testhal/STM32F37x/EXT/mcuconf.h b/testhal/STM32F37x/EXT/mcuconf.h deleted file mode 100644 index 1434b2fae..000000000 --- a/testhal/STM32F37x/EXT/mcuconf.h +++ /dev/null @@ -1,208 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F37x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_SDPRE STM32_SDPRE_DIV12 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_SDADC1 FALSE -#define STM32_ADC_USE_SDADC2 FALSE -#define STM32_ADC_USE_SDADC3 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC2_DMA_PRIORITY 2 -#define STM32_ADC_SDADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_DMA_IRQ_PRIORITY 5 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 TRUE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_23_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F37x/EXT/readme.txt b/testhal/STM32F37x/EXT/readme.txt deleted file mode 100644 index e5a0e21fb..000000000 --- a/testhal/STM32F37x/EXT/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - EXT driver demo for STM32F37x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32373C-EVAL board. - -** The Demo ** - -The application demonstrates the use of the STM32F37x EXT driver. - -** Board Setup ** - -None required. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F37x/I2C/.cproject b/testhal/STM32F37x/I2C/.cproject deleted file mode 100644 index 367316a03..000000000 --- a/testhal/STM32F37x/I2C/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F37x/I2C/.project b/testhal/STM32F37x/I2C/.project deleted file mode 100644 index 03945c10e..000000000 --- a/testhal/STM32F37x/I2C/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F37x-I2C - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32373C_EVAL - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F37x/I2C/Makefile b/testhal/STM32F37x/I2C/Makefile deleted file mode 100644 index 782a3b3d7..000000000 --- a/testhal/STM32F37x/I2C/Makefile +++ /dev/null @@ -1,221 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32373C_EVAL/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F37x/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F3xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F373xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various/devices_lib/accel \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F37x/I2C/chconf.h b/testhal/STM32F37x/I2C/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F37x/I2C/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/I2C/halconf.h b/testhal/STM32F37x/I2C/halconf.h deleted file mode 100644 index 3ac5de5ba..000000000 --- a/testhal/STM32F37x/I2C/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/I2C/main.c b/testhal/STM32F37x/I2C/main.c deleted file mode 100644 index fc0e4e2ab..000000000 --- a/testhal/STM32F37x/I2C/main.c +++ /dev/null @@ -1,110 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * Timing values are taken from the RM except the PRESC set to 9 because - * the input clock is 72MHz. - * The timings are critical, please always refer to the STM32 Reference - * Manual before attempting changes. - */ -#if 0 -static const I2CConfig i2cconfig = { - STM32_TIMINGR_PRESC(8U) | /* 72MHz/9 = 8MHz I2CCLK. */ - STM32_TIMINGR_SCLDEL(3U) | STM32_TIMINGR_SDADEL(3U) | - STM32_TIMINGR_SCLH(3U) | STM32_TIMINGR_SCLL(9U), - 0, - 0 -}; -#endif -static const I2CConfig i2cconfig = { - STM32_TIMINGR_PRESC(15U) | - STM32_TIMINGR_SCLDEL(4U) | STM32_TIMINGR_SDADEL(2U) | - STM32_TIMINGR_SCLH(15U) | STM32_TIMINGR_SCLL(21U), - 0, - 0 -}; - -/* - * This is a periodic thread that does absolutely nothing except flashing - * a LED. - */ -static WORKING_AREA(blinker_wa, 128); -static msg_t blinker(void *arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - palSetPad(GPIOC, GPIOC_LED1); - chThdSleepMilliseconds(500); - palClearPad(GPIOC, GPIOC_LED1); - chThdSleepMilliseconds(500); - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Starting the I2C driver 2. - */ - i2cStart(&I2CD2, &i2cconfig); - - /* - * Starting the blinker thread. - */ - chThdCreateStatic(blinker_wa, sizeof(blinker_wa), - NORMALPRIO-1, blinker, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - unsigned i; - msg_t msg; - static const uint8_t cmd[] = {0, 0}; - uint8_t data[16]; - - msg = i2cMasterTransmitTimeout(&I2CD2, 0x52, cmd, sizeof(cmd), - data, sizeof(data), TIME_INFINITE); - if (msg != RDY_OK) - palTogglePad(GPIOC, GPIOC_LED3); - for (i = 0; i < 256; i++) { - msg = i2cMasterReceiveTimeout(&I2CD2, 0x52, - data, sizeof(data), TIME_INFINITE); - if (msg != RDY_OK) - palTogglePad(GPIOC, GPIOC_LED3); - } - chThdSleepMilliseconds(500); - palTogglePad(GPIOC, GPIOC_LED2); - } - return 0; -} diff --git a/testhal/STM32F37x/I2C/mcuconf.h b/testhal/STM32F37x/I2C/mcuconf.h deleted file mode 100644 index c18448c10..000000000 --- a/testhal/STM32F37x/I2C/mcuconf.h +++ /dev/null @@ -1,208 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F37x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_SDPRE STM32_SDPRE_DIV12 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_SDADC1 FALSE -#define STM32_ADC_USE_SDADC2 FALSE -#define STM32_ADC_USE_SDADC3 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC2_DMA_PRIORITY 2 -#define STM32_ADC_SDADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_DMA_IRQ_PRIORITY 5 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_23_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 TRUE -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F37x/I2C/readme.txt b/testhal/STM32F37x/I2C/readme.txt deleted file mode 100644 index f7d032869..000000000 --- a/testhal/STM32F37x/I2C/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - I2C driver demo for STM32F37x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32373C-EVAL board. - -** The Demo ** - -The application demonstrates the use of the STM32F37x I2C driver. - -** Board Setup ** - -None. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F37x/IRQ_STORM/.cproject b/testhal/STM32F37x/IRQ_STORM/.cproject deleted file mode 100644 index bf0ac2f78..000000000 --- a/testhal/STM32F37x/IRQ_STORM/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F37x/IRQ_STORM/.project b/testhal/STM32F37x/IRQ_STORM/.project deleted file mode 100644 index da09bb566..000000000 --- a/testhal/STM32F37x/IRQ_STORM/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F37x-IRQ_STORM - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32373C_EVAL - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F37x/IRQ_STORM/Makefile b/testhal/STM32F37x/IRQ_STORM/Makefile deleted file mode 100644 index 782a3b3d7..000000000 --- a/testhal/STM32F37x/IRQ_STORM/Makefile +++ /dev/null @@ -1,221 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32373C_EVAL/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F37x/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F3xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F373xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various/devices_lib/accel \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F37x/IRQ_STORM/chconf.h b/testhal/STM32F37x/IRQ_STORM/chconf.h deleted file mode 100644 index 38242d75d..000000000 --- a/testhal/STM32F37x/IRQ_STORM/chconf.h +++ /dev/null @@ -1,533 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE FALSE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#define CORTEX_USE_FPU FALSE - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/IRQ_STORM/halconf.h b/testhal/STM32F37x/IRQ_STORM/halconf.h deleted file mode 100644 index 117a5979b..000000000 --- a/testhal/STM32F37x/IRQ_STORM/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/IRQ_STORM/main.c b/testhal/STM32F37x/IRQ_STORM/main.c deleted file mode 100644 index 7a630450b..000000000 --- a/testhal/STM32F37x/IRQ_STORM/main.c +++ /dev/null @@ -1,330 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include - -#include "ch.h" -#include "hal.h" - -/*===========================================================================*/ -/* Configurable settings. */ -/*===========================================================================*/ - -#ifndef RANDOMIZE -#define RANDOMIZE FALSE -#endif - -#ifndef ITERATIONS -#define ITERATIONS 100 -#endif - -#ifndef NUM_THREADS -#define NUM_THREADS 4 -#endif - -#ifndef MAILBOX_SIZE -#define MAILBOX_SIZE 4 -#endif - -/*===========================================================================*/ -/* Test related code. */ -/*===========================================================================*/ - -#define MSG_SEND_LEFT 0 -#define MSG_SEND_RIGHT 1 - -static bool_t saturated; - -/* - * Mailboxes and buffers. - */ -static Mailbox mb[NUM_THREADS]; -static msg_t b[NUM_THREADS][MAILBOX_SIZE]; - -/* - * Test worker threads. - */ -static WORKING_AREA(waWorkerThread[NUM_THREADS], 128); -static msg_t WorkerThread(void *arg) { - static volatile unsigned x = 0; - static unsigned cnt = 0; - unsigned me = (unsigned)arg; - unsigned target; - unsigned r; - msg_t msg; - - chRegSetThreadName("worker"); - - /* Work loop.*/ - while (TRUE) { - /* Waiting for a message.*/ - chMBFetch(&mb[me], &msg, TIME_INFINITE); - -#if RANDOMIZE - /* Pseudo-random delay.*/ - { - chSysLock(); - r = rand() & 15; - chSysUnlock(); - while (r--) - x++; - } -#else - /* Fixed delay.*/ - { - r = me >> 4; - while (r--) - x++; - } -#endif - - /* Deciding in which direction to re-send the message.*/ - if (msg == MSG_SEND_LEFT) - target = me - 1; - else - target = me + 1; - - if (target < NUM_THREADS) { - /* If this thread is not at the end of a chain re-sending the message, - note this check works because the variable target is unsigned.*/ - msg = chMBPost(&mb[target], msg, TIME_IMMEDIATE); - if (msg != RDY_OK) - saturated = TRUE; - } - else { - /* Provides a visual feedback about the system.*/ - if (++cnt >= 500) { - cnt = 0; - palTogglePad(GPIOC, GPIOC_LED1); - } - } - } -} - -/* - * GPT2 callback. - */ -static void gpt2cb(GPTDriver *gptp) { - msg_t msg; - - (void)gptp; - chSysLockFromIsr(); - msg = chMBPostI(&mb[0], MSG_SEND_RIGHT); - if (msg != RDY_OK) - saturated = TRUE; - chSysUnlockFromIsr(); -} - -/* - * GPT3 callback. - */ -static void gpt3cb(GPTDriver *gptp) { - msg_t msg; - - (void)gptp; - chSysLockFromIsr(); - msg = chMBPostI(&mb[NUM_THREADS - 1], MSG_SEND_LEFT); - if (msg != RDY_OK) - saturated = TRUE; - chSysUnlockFromIsr(); -} - -/* - * GPT2 configuration. - */ -static const GPTConfig gpt2cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt2cb /* Timer callback.*/ -}; - -/* - * GPT3 configuration. - */ -static const GPTConfig gpt3cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt3cb /* Timer callback.*/ -}; - - -/*===========================================================================*/ -/* Generic demo code. */ -/*===========================================================================*/ - -static void print(char *p) { - - while (*p) { - chSequentialStreamPut(&SD2, *p++); - } -} - -static void println(char *p) { - - while (*p) { - chSequentialStreamPut(&SD2, *p++); - } - chSequentialStreamWrite(&SD2, (uint8_t *)"\r\n", 2); -} - -static void printn(uint32_t n) { - char buf[16], *p; - - if (!n) - chSequentialStreamPut(&SD2, '0'); - else { - p = buf; - while (n) - *p++ = (n % 10) + '0', n /= 10; - while (p > buf) - chSequentialStreamPut(&SD2, *--p); - } -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - gptcnt_t interval, threshold, worst; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the serial driver 2 using the default configuration, pins - * are pre-configured in board.h. - */ - sdStart(&SD2, NULL); - - /* - * Activates GPTs. - */ - gptStart(&GPTD2, &gpt2cfg); - gptStart(&GPTD3, &gpt3cfg); - - /* - * Initializes the mailboxes and creates the worker threads. - */ - for (i = 0; i < NUM_THREADS; i++) { - chMBInit(&mb[i], b[i], MAILBOX_SIZE); - chThdCreateStatic(waWorkerThread[i], sizeof waWorkerThread[i], - NORMALPRIO - 20, WorkerThread, (void *)i); - } - - /* - * Test procedure. - */ - println(""); - println("*** ChibiOS/RT IRQ-STORM long duration test"); - println("***"); - print("*** Kernel: "); - println(CH_KERNEL_VERSION); - print("*** Compiled: "); - println(__DATE__ " - " __TIME__); -#ifdef CH_COMPILER_NAME - print("*** Compiler: "); - println(CH_COMPILER_NAME); -#endif - print("*** Architecture: "); - println(CH_ARCHITECTURE_NAME); -#ifdef CH_CORE_VARIANT_NAME - print("*** Core Variant: "); - println(CH_CORE_VARIANT_NAME); -#endif -#ifdef CH_PORT_INFO - print("*** Port Info: "); - println(CH_PORT_INFO); -#endif -#ifdef PLATFORM_NAME - print("*** Platform: "); - println(PLATFORM_NAME); -#endif -#ifdef BOARD_NAME - print("*** Test Board: "); - println(BOARD_NAME); -#endif - println("***"); - print("*** System Clock: "); - printn(STM32_SYSCLK); - println(""); - print("*** Iterations: "); - printn(ITERATIONS); - println(""); - print("*** Randomize: "); - printn(RANDOMIZE); - println(""); - print("*** Threads: "); - printn(NUM_THREADS); - println(""); - print("*** Mailbox size: "); - printn(MAILBOX_SIZE); - println(""); - - println(""); - worst = 0; - for (i = 1; i <= ITERATIONS; i++){ - print("Iteration "); - printn(i); - println(""); - saturated = FALSE; - threshold = 0; - for (interval = 2000; interval >= 10; interval -= interval / 10) { - gptStartContinuous(&GPTD2, interval - 1); /* Slightly out of phase.*/ - gptStartContinuous(&GPTD3, interval + 1); /* Slightly out of phase.*/ - chThdSleepMilliseconds(1000); - gptStopTimer(&GPTD2); - gptStopTimer(&GPTD3); - if (!saturated) - print("."); - else { - print("#"); - if (threshold == 0) - threshold = interval; - } - } - /* Gives the worker threads a chance to empty the mailboxes before next - cycle.*/ - chThdSleepMilliseconds(20); - println(""); - print("Saturated at "); - printn(threshold); - println(" uS"); - println(""); - if (threshold > worst) - worst = threshold; - } - gptStopTimer(&GPTD2); - gptStopTimer(&GPTD3); - - print("Worst case at "); - printn(worst); - println(" uS"); - println(""); - println("Test Complete"); - - /* - * Normal main() thread activity, nothing in this test. - */ - while (TRUE) { - chThdSleepMilliseconds(5000); - } -} diff --git a/testhal/STM32F37x/IRQ_STORM/mcuconf.h b/testhal/STM32F37x/IRQ_STORM/mcuconf.h deleted file mode 100644 index 1434b2fae..000000000 --- a/testhal/STM32F37x/IRQ_STORM/mcuconf.h +++ /dev/null @@ -1,208 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F37x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_SDPRE STM32_SDPRE_DIV12 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_SDADC1 FALSE -#define STM32_ADC_USE_SDADC2 FALSE -#define STM32_ADC_USE_SDADC3 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC2_DMA_PRIORITY 2 -#define STM32_ADC_SDADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_DMA_IRQ_PRIORITY 5 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 TRUE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_23_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F37x/IRQ_STORM/readme.txt b/testhal/STM32F37x/IRQ_STORM/readme.txt deleted file mode 100644 index 740cf3c20..000000000 --- a/testhal/STM32F37x/IRQ_STORM/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - IRQ_STORM stress test demo for STM32F37x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32373C-EVAL board. - -** The Demo ** - -The application demonstrates the use of the STM32F37x GPT, PAL and Serial -drivers in order to implement a system stress demo. - -** Board Setup ** - -- Connect a terminal emulator to serial port connector (38400-N-8-1). - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F37x/PWM-ICU/.cproject b/testhal/STM32F37x/PWM-ICU/.cproject deleted file mode 100644 index 42e9f611b..000000000 --- a/testhal/STM32F37x/PWM-ICU/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F37x/PWM-ICU/.project b/testhal/STM32F37x/PWM-ICU/.project deleted file mode 100644 index 958fa1637..000000000 --- a/testhal/STM32F37x/PWM-ICU/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F37x-PWM-ICU - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32373C_EVAL - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F37x/PWM-ICU/Makefile b/testhal/STM32F37x/PWM-ICU/Makefile deleted file mode 100644 index 782a3b3d7..000000000 --- a/testhal/STM32F37x/PWM-ICU/Makefile +++ /dev/null @@ -1,221 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32373C_EVAL/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F37x/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F3xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F373xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various/devices_lib/accel \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F37x/PWM-ICU/chconf.h b/testhal/STM32F37x/PWM-ICU/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F37x/PWM-ICU/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/PWM-ICU/halconf.h b/testhal/STM32F37x/PWM-ICU/halconf.h deleted file mode 100644 index 2f74c82c8..000000000 --- a/testhal/STM32F37x/PWM-ICU/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU TRUE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/PWM-ICU/main.c b/testhal/STM32F37x/PWM-ICU/main.c deleted file mode 100644 index 603b891f8..000000000 --- a/testhal/STM32F37x/PWM-ICU/main.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void pwmpcb(PWMDriver *pwmp) { - - (void)pwmp; - palClearPad(GPIOC, GPIOC_LED1); -} - -static void pwmc1cb(PWMDriver *pwmp) { - - (void)pwmp; - palSetPad(GPIOC, GPIOC_LED1); -} - -static PWMConfig pwmcfg = { - 10000, /* 10kHz PWM clock frequency. */ - 10000, /* Initial PWM period 1S. */ - pwmpcb, - { - {PWM_OUTPUT_ACTIVE_LOW, pwmc1cb}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL} - }, - 0, -}; - -icucnt_t last_width, last_period; - -static void icuwidthcb(ICUDriver *icup) { - - palSetPad(GPIOC, GPIOC_LED2); - last_width = icuGetWidth(icup); -} - -static void icuperiodcb(ICUDriver *icup) { - - palClearPad(GPIOC, GPIOC_LED2); - last_period = icuGetPeriod(icup); -} - -static ICUConfig icucfg = { - ICU_INPUT_ACTIVE_LOW, - 10000, /* 10kHz ICU clock frequency. */ - icuwidthcb, - icuperiodcb, - NULL, - ICU_CHANNEL_1 -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes the PWM driver 5 and ICU driver 3. - * GPIOC0 is the PWM output. - * GPIOC6 is the ICU input. - * The two pins have to be externally connected together. - */ - pwmStart(&PWMD5, &pwmcfg); - palSetPadMode(GPIOC, 0, PAL_MODE_ALTERNATE(2)); - icuStart(&ICUD3, &icucfg); - palSetPadMode(GPIOC, 6, PAL_MODE_ALTERNATE(2)); - icuEnable(&ICUD3); - chThdSleepMilliseconds(2000); - - /* - * Starts the PWM channel 0 using 75% duty cycle. - */ - pwmEnableChannel(&PWMD5, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD5, 7500)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 50% duty cycle. - */ - pwmEnableChannel(&PWMD5, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD5, 5000)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 25% duty cycle. - */ - pwmEnableChannel(&PWMD5, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD5, 2500)); - chThdSleepMilliseconds(5000); - - /* - * Changes PWM period to half second the duty cycle becomes 50% - * implicitly. - */ - pwmChangePeriod(&PWMD5, 5000); - chThdSleepMilliseconds(5000); - - /* - * Disables channel 0 and stops the drivers. - */ - pwmDisableChannel(&PWMD5, 0); - pwmStop(&PWMD5); - icuDisable(&ICUD3); - icuStop(&ICUD3); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F37x/PWM-ICU/mcuconf.h b/testhal/STM32F37x/PWM-ICU/mcuconf.h deleted file mode 100644 index 36b5c84a5..000000000 --- a/testhal/STM32F37x/PWM-ICU/mcuconf.h +++ /dev/null @@ -1,208 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F37x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_SDPRE STM32_SDPRE_DIV12 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_SDADC1 FALSE -#define STM32_ADC_USE_SDADC2 FALSE -#define STM32_ADC_USE_SDADC3 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC2_DMA_PRIORITY 2 -#define STM32_ADC_SDADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_DMA_IRQ_PRIORITY 5 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 TRUE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_23_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 TRUE -#define STM32_ICU_USE_TIM4 TRUE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 TRUE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 TRUE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F37x/PWM-ICU/readme.txt b/testhal/STM32F37x/PWM-ICU/readme.txt deleted file mode 100644 index b1acb879a..000000000 --- a/testhal/STM32F37x/PWM-ICU/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - PWM-ICU drivers demo for STM32F37x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32373C-EVAL board. - -** The Demo ** - -The application demonstrates the use of the STM32F37x PWM and ICU drivers. - -** Board Setup ** - -- Connect PC0 and PC6 together. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F37x/SDADC/.cproject b/testhal/STM32F37x/SDADC/.cproject deleted file mode 100644 index e3d709437..000000000 --- a/testhal/STM32F37x/SDADC/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F37x/SDADC/.project b/testhal/STM32F37x/SDADC/.project deleted file mode 100644 index 83a87eb03..000000000 --- a/testhal/STM32F37x/SDADC/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F37x-SDADC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32373C_EVAL - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F37x/SDADC/Makefile b/testhal/STM32F37x/SDADC/Makefile deleted file mode 100644 index 782a3b3d7..000000000 --- a/testhal/STM32F37x/SDADC/Makefile +++ /dev/null @@ -1,221 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32373C_EVAL/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F37x/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F3xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F373xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various/devices_lib/accel \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F37x/SDADC/chconf.h b/testhal/STM32F37x/SDADC/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F37x/SDADC/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/SDADC/halconf.h b/testhal/STM32F37x/SDADC/halconf.h deleted file mode 100644 index 85a5dbd3b..000000000 --- a/testhal/STM32F37x/SDADC/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC TRUE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/SDADC/main.c b/testhal/STM32F37x/SDADC/main.c deleted file mode 100644 index 1d700a3a5..000000000 --- a/testhal/STM32F37x/SDADC/main.c +++ /dev/null @@ -1,164 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#define ADC_GRP1_NUM_CHANNELS 1 -#define ADC_GRP1_BUF_DEPTH 8 - -#define ADC_GRP2_NUM_CHANNELS 1 -#define ADC_GRP2_BUF_DEPTH 32 - -static adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH]; -static adcsample_t samples2[ADC_GRP2_NUM_CHANNELS * ADC_GRP2_BUF_DEPTH]; - -/* - * ADC streaming callback. - */ -size_t nx = 0, ny = 0; -static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) { - - (void)adcp; - if (samples2 == buffer) { - nx += n; - } - else { - ny += n; - } -} - -static void adcerrorcallback(ADCDriver *adcp, adcerror_t err) { - - (void)adcp; - (void)err; -} - -/* - * SDADC configuration. - */ -static const ADCConfig sdadc_config = { - 0, - { - SDADC_CONFR_GAIN_1X | SDADC_CONFR_SE_ZERO_VOLT | SDADC_CONFR_COMMON_VSSSD, - 0, - 0 - } -}; - -/* - * ADC conversion group. - * Mode: Linear buffer, 8 samples of 1 channel, SW triggered. - * Channels: ADC_IN5P. - */ -static const ADCConversionGroup adcgrpcfg1 = { - FALSE, - ADC_GRP1_NUM_CHANNELS, - NULL, - adcerrorcallback, - .u.sdadc = { - SDADC_CR2_JSWSTART, /* CR2 */ - SDADC_JCHGR_CH(5), /* JCHGR */ - { /* CONFCHR[2]*/ - SDADC_CONFCHR1_CH5(0), - 0 - } - } -}; - -/* - * ADC conversion group. - * Mode: Continuous, 32 samples of 1 channel, SW triggered. - * Channels: ADC_IN5P. - */ -static const ADCConversionGroup adcgrpcfg2 = { - TRUE, - ADC_GRP2_NUM_CHANNELS, - adccallback, - adcerrorcallback, - .u.sdadc = { - SDADC_CR2_JSWSTART, /* CR2 */ - SDADC_JCHGR_CH(5), /* JCHGR */ - { /* CONFCHR[2]*/ - SDADC_CONFCHR1_CH5(0), - 0 - } - } -}; - -/* - * Red LEDs blinker thread, times are in milliseconds. - */ -static WORKING_AREA(waThread1, 128); -static msg_t Thread1(void *arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - palClearPad(GPIOC, GPIOC_LED1); - chThdSleepMilliseconds(500); - palSetPad(GPIOC, GPIOC_LED1); - chThdSleepMilliseconds(500); - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Activates the SDADC1 driver. - */ - adcStart(&SDADCD1, &sdadc_config); - adcSTM32Calibrate(&SDADCD1); - - /* - * Linear conversion. - */ - adcConvert(&SDADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH); - - /* - * Starts an ADC continuous conversion. - */ - adcStartConversion(&SDADCD1, &adcgrpcfg2, samples2, ADC_GRP2_BUF_DEPTH); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - if (palReadPad(GPIOA, GPIOA_WKUP_BUTTON)) { - adcStopConversion(&SDADCD1); - } - chThdSleepMilliseconds(500); - } -} diff --git a/testhal/STM32F37x/SDADC/mcuconf.h b/testhal/STM32F37x/SDADC/mcuconf.h deleted file mode 100644 index 8a4e68ba8..000000000 --- a/testhal/STM32F37x/SDADC/mcuconf.h +++ /dev/null @@ -1,208 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F37x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_SDPRE STM32_SDPRE_DIV12 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 TRUE -#define STM32_ADC_USE_SDADC1 TRUE -#define STM32_ADC_USE_SDADC2 TRUE -#define STM32_ADC_USE_SDADC3 TRUE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC2_DMA_PRIORITY 2 -#define STM32_ADC_SDADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_DMA_IRQ_PRIORITY 5 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 TRUE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_23_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F37x/SDADC/readme.txt b/testhal/STM32F37x/SDADC/readme.txt deleted file mode 100644 index 0e5191419..000000000 --- a/testhal/STM32F37x/SDADC/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - ADC driver demo for STM32F37x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32373C-EVAL board. - -** The Demo ** - -The application demonstrates the use of the STM32F37x ADC driver on the -SDADC peripheral. - -** Board Setup ** - -None. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F37x/SPI/.cproject b/testhal/STM32F37x/SPI/.cproject deleted file mode 100644 index 5aaba7ac7..000000000 --- a/testhal/STM32F37x/SPI/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F37x/SPI/.project b/testhal/STM32F37x/SPI/.project deleted file mode 100644 index c3985659c..000000000 --- a/testhal/STM32F37x/SPI/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F37x-SPI - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32373C_EVAL - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F37x/SPI/Makefile b/testhal/STM32F37x/SPI/Makefile deleted file mode 100644 index 782a3b3d7..000000000 --- a/testhal/STM32F37x/SPI/Makefile +++ /dev/null @@ -1,221 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32373C_EVAL/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F37x/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F3xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F373xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various/devices_lib/accel \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F37x/SPI/chconf.h b/testhal/STM32F37x/SPI/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F37x/SPI/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/SPI/halconf.h b/testhal/STM32F37x/SPI/halconf.h deleted file mode 100644 index 3e1cafbbf..000000000 --- a/testhal/STM32F37x/SPI/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/SPI/main.c b/testhal/STM32F37x/SPI/main.c deleted file mode 100644 index 3a828f3a9..000000000 --- a/testhal/STM32F37x/SPI/main.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * Maximum speed SPI configuration (18MHz, CPHA=0, CPOL=0, MSb first). - */ -static const SPIConfig hs_spicfg = { - NULL, - GPIOB, - 10, - 0, - SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0 -}; - -/* - * Low speed SPI configuration (140.625kHz, CPHA=0, CPOL=0, MSb first). - */ -static const SPIConfig ls_spicfg = { - NULL, - GPIOB, - 10, - SPI_CR1_BR_2 | SPI_CR1_BR_1, - SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0 -}; - -/* - * SPI TX and RX buffers. - */ -static uint8_t txbuf[512]; -static uint8_t rxbuf[512]; - -/* - * SPI bus contender 1. - */ -static WORKING_AREA(spi_thread_1_wa, 256); -static msg_t spi_thread_1(void *p) { - - (void)p; - chRegSetThreadName("SPI thread 1"); - while (TRUE) { - spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ - palClearPad(GPIOC, GPIOC_LED2); /* LED ON. */ - spiStart(&SPID2, &hs_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID2); /* Slave Select assertion. */ - spiExchange(&SPID2, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID2); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID2); /* Ownership release. */ - } - return 0; -} - -/* - * SPI bus contender 2. - */ -static WORKING_AREA(spi_thread_2_wa, 256); -static msg_t spi_thread_2(void *p) { - - (void)p; - chRegSetThreadName("SPI thread 2"); - while (TRUE) { - spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ - palSetPad(GPIOC, GPIOC_LED2); /* LED OFF. */ - spiStart(&SPID2, &ls_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID2); /* Slave Select assertion. */ - spiExchange(&SPID2, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID2); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID2); /* Ownership release. */ - } - return 0; -} - -/* - * This is a periodic thread that does absolutely nothing except flashing - * a LED. - */ -static WORKING_AREA(blinker_wa, 128); -static msg_t blinker(void *arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - palSetPad(GPIOC, GPIOC_LED1); - chThdSleepMilliseconds(500); - palClearPad(GPIOC, GPIOC_LED1); - chThdSleepMilliseconds(500); - } -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * SPI2 I/O pins setup. - */ - palSetPadMode(GPIOB, 14, PAL_MODE_ALTERNATE(5) | - PAL_STM32_OSPEED_HIGHEST); /* New MISO. */ - palSetPadMode(GPIOB, 15, PAL_MODE_ALTERNATE(5) | - PAL_STM32_OSPEED_HIGHEST); /* New MOSI. */ - - /* - * Prepare transmit pattern. - */ - for (i = 0; i < sizeof(txbuf); i++) - txbuf[i] = (uint8_t)i; - - /* - * Starting the transmitter and receiver threads. - */ - chThdCreateStatic(spi_thread_1_wa, sizeof(spi_thread_1_wa), - NORMALPRIO + 1, spi_thread_1, NULL); - chThdCreateStatic(spi_thread_2_wa, sizeof(spi_thread_2_wa), - NORMALPRIO + 1, spi_thread_2, NULL); - - /* - * Starting the blinker thread. - */ - chThdCreateStatic(blinker_wa, sizeof(blinker_wa), - NORMALPRIO-1, blinker, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F37x/SPI/mcuconf.h b/testhal/STM32F37x/SPI/mcuconf.h deleted file mode 100644 index 5326570a9..000000000 --- a/testhal/STM32F37x/SPI/mcuconf.h +++ /dev/null @@ -1,208 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F37x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_SDPRE STM32_SDPRE_DIV12 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_SDADC1 FALSE -#define STM32_ADC_USE_SDADC2 FALSE -#define STM32_ADC_USE_SDADC3 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC2_DMA_PRIORITY 2 -#define STM32_ADC_SDADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_DMA_IRQ_PRIORITY 5 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_23_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F37x/SPI/readme.txt b/testhal/STM32F37x/SPI/readme.txt deleted file mode 100644 index ebf5f3563..000000000 --- a/testhal/STM32F37x/SPI/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - SPI driver demo for STM32F37x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32373C-EVAL board. - -** The Demo ** - -The application demonstrates the use of the STM32F37x SPI driver. - -** Board Setup ** - -- Connect PB14 and PB15 together for SPI loop-back. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F37x/UART/.cproject b/testhal/STM32F37x/UART/.cproject deleted file mode 100644 index be46a014d..000000000 --- a/testhal/STM32F37x/UART/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F37x/UART/.project b/testhal/STM32F37x/UART/.project deleted file mode 100644 index dfdbbc5df..000000000 --- a/testhal/STM32F37x/UART/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F37x-UART - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32373C_EVAL - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F37x/UART/Makefile b/testhal/STM32F37x/UART/Makefile deleted file mode 100644 index 782a3b3d7..000000000 --- a/testhal/STM32F37x/UART/Makefile +++ /dev/null @@ -1,221 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32373C_EVAL/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F37x/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F3xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F373xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various/devices_lib/accel \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F37x/UART/chconf.h b/testhal/STM32F37x/UART/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F37x/UART/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/UART/halconf.h b/testhal/STM32F37x/UART/halconf.h deleted file mode 100644 index a4fc70926..000000000 --- a/testhal/STM32F37x/UART/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART TRUE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/UART/main.c b/testhal/STM32F37x/UART/main.c deleted file mode 100644 index 7b9577f8a..000000000 --- a/testhal/STM32F37x/UART/main.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static VirtualTimer vt1, vt2; - -static void restart(void *p) { - - (void)p; - - chSysLockFromIsr(); - uartStartSendI(&UARTD2, 14, "Hello World!\r\n"); - chSysUnlockFromIsr(); -} - -static void ledoff(void *p) { - - (void)p; - palSetPad(GPIOC, GPIOC_LED1); -} - -/* - * This callback is invoked when a transmission buffer has been completely - * read by the driver. - */ -static void txend1(UARTDriver *uartp) { - - (void)uartp; - palSetPad(GPIOC, GPIOC_LED1); -} - -/* - * This callback is invoked when a transmission has physically completed. - */ -static void txend2(UARTDriver *uartp) { - - (void)uartp; - palSetPad(GPIOC, GPIOC_LED1); - chSysLockFromIsr(); - if (chVTIsArmedI(&vt1)) - chVTResetI(&vt1); - chVTSetI(&vt1, MS2ST(5000), restart, NULL); - chSysUnlockFromIsr(); -} - -/* - * This callback is invoked on a receive error, the errors mask is passed - * as parameter. - */ -static void rxerr(UARTDriver *uartp, uartflags_t e) { - - (void)uartp; - (void)e; -} - -/* - * This callback is invoked when a character is received but the application - * was not ready to receive it, the character is passed as parameter. - */ -static void rxchar(UARTDriver *uartp, uint16_t c) { - - (void)uartp; - (void)c; - /* Flashing the LED each time a character is received.*/ - palClearPad(GPIOC, GPIOC_LED1); - chSysLockFromIsr(); - if (chVTIsArmedI(&vt2)) - chVTResetI(&vt2); - chVTSetI(&vt2, MS2ST(200), ledoff, NULL); - chSysUnlockFromIsr(); -} - -/* - * This callback is invoked when a receive buffer has been completely written. - */ -static void rxend(UARTDriver *uartp) { - - (void)uartp; -} - -/* - * UART driver configuration structure. - */ -static UARTConfig uart_cfg_1 = { - txend1, - txend2, - rxend, - rxchar, - rxerr, - 38400, - 0, - USART_CR2_LINEN, - 0 -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the serial driver 1, PA9 and PA10 are routed to USART2. - */ - uartStart(&UARTD2, &uart_cfg_1); - - /* - * Starts the transmission, it will be handled entirely in background. - */ - uartStartSend(&UARTD2, 13, "Starting...\r\n"); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } -} diff --git a/testhal/STM32F37x/UART/mcuconf.h b/testhal/STM32F37x/UART/mcuconf.h deleted file mode 100644 index 1421ff9f3..000000000 --- a/testhal/STM32F37x/UART/mcuconf.h +++ /dev/null @@ -1,208 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F37x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_SDPRE STM32_SDPRE_DIV12 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_SDADC1 FALSE -#define STM32_ADC_USE_SDADC2 FALSE -#define STM32_ADC_USE_SDADC3 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC2_DMA_PRIORITY 2 -#define STM32_ADC_SDADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_DMA_IRQ_PRIORITY 5 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_23_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 TRUE -#define STM32_UART_USE_USART2 TRUE -#define STM32_UART_USE_USART3 TRUE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F37x/UART/readme.txt b/testhal/STM32F37x/UART/readme.txt deleted file mode 100644 index 27b6bfefd..000000000 --- a/testhal/STM32F37x/UART/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - UART driver demo for STM32F37x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32373C-EVAL board. - -** The Demo ** - -The application demonstrates the use of the STM32F37x UART driver. - -** Board Setup ** - -- Connect an RS232 transceiver to pins PA9(TX) and PA10(RX). -- Connect a terminal emulator to the transceiver (38400-N-8-1). - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F37x/USB_CDC/.cproject b/testhal/STM32F37x/USB_CDC/.cproject deleted file mode 100644 index 66a97f931..000000000 --- a/testhal/STM32F37x/USB_CDC/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F37x/USB_CDC/.project b/testhal/STM32F37x/USB_CDC/.project deleted file mode 100644 index 4e173140c..000000000 --- a/testhal/STM32F37x/USB_CDC/.project +++ /dev/null @@ -1,43 +0,0 @@ - - - STM32F37x-USB_CDC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32373C_EVAL - - - os - 2 - CHIBIOS/os - - - test - 2 - CHIBIOS/test - - - diff --git a/testhal/STM32F37x/USB_CDC/Makefile b/testhal/STM32F37x/USB_CDC/Makefile deleted file mode 100644 index 60e76cc62..000000000 --- a/testhal/STM32F37x/USB_CDC/Makefile +++ /dev/null @@ -1,223 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32373C_EVAL/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F37x/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F3xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F373xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/shell.c \ - $(CHIBIOS)/os/various/chprintf.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various/devices_lib/accel \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F37x/USB_CDC/chconf.h b/testhal/STM32F37x/USB_CDC/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F37x/USB_CDC/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/USB_CDC/halconf.h b/testhal/STM32F37x/USB_CDC/halconf.h deleted file mode 100644 index cd76b0cfe..000000000 --- a/testhal/STM32F37x/USB_CDC/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F37x/USB_CDC/main.c b/testhal/STM32F37x/USB_CDC/main.c deleted file mode 100644 index 200a0f3d5..000000000 --- a/testhal/STM32F37x/USB_CDC/main.c +++ /dev/null @@ -1,515 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include -#include - -#include "ch.h" -#include "hal.h" -#include "test.h" - -#include "shell.h" -#include "chprintf.h" - -/*===========================================================================*/ -/* USB related stuff. */ -/*===========================================================================*/ - -/* - * Endpoints to be used for USBD1. - */ -#define USBD1_DATA_REQUEST_EP 1 -#define USBD1_DATA_AVAILABLE_EP 1 -#define USBD1_INTERRUPT_REQUEST_EP 2 - -/* - * DP resistor control. - */ -#define usb_lld_connect_bus(usbp) palClearPad(GPIOC, GPIOC_USB_DISCONNECT) -#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOC, GPIOC_USB_DISCONNECT) - -/* - * Serial over USB Driver structure. - */ -static SerialUSBDriver SDU1; - -/* - * USB Device Descriptor. - */ -static const uint8_t vcom_device_descriptor_data[18] = { - USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ - 0x02, /* bDeviceClass (CDC). */ - 0x00, /* bDeviceSubClass. */ - 0x00, /* bDeviceProtocol. */ - 0x40, /* bMaxPacketSize. */ - 0x0483, /* idVendor (ST). */ - 0x5740, /* idProduct. */ - 0x0200, /* bcdDevice. */ - 1, /* iManufacturer. */ - 2, /* iProduct. */ - 3, /* iSerialNumber. */ - 1) /* bNumConfigurations. */ -}; - -/* - * Device Descriptor wrapper. - */ -static const USBDescriptor vcom_device_descriptor = { - sizeof vcom_device_descriptor_data, - vcom_device_descriptor_data -}; - -/* Configuration Descriptor tree for a CDC.*/ -static const uint8_t vcom_configuration_descriptor_data[67] = { - /* Configuration Descriptor.*/ - USB_DESC_CONFIGURATION(67, /* wTotalLength. */ - 0x02, /* bNumInterfaces. */ - 0x01, /* bConfigurationValue. */ - 0, /* iConfiguration. */ - 0xC0, /* bmAttributes (self powered). */ - 50), /* bMaxPower (100mA). */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x01, /* bNumEndpoints. */ - 0x02, /* bInterfaceClass (Communications - Interface Class, CDC section - 4.2). */ - 0x02, /* bInterfaceSubClass (Abstract - Control Model, CDC section 4.3). */ - 0x01, /* bInterfaceProtocol (AT commands, - CDC section 4.4). */ - 0), /* iInterface. */ - /* Header Functional Descriptor (CDC section 5.2.3).*/ - USB_DESC_BYTE (5), /* bLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header - Functional Descriptor. */ - USB_DESC_BCD (0x0110), /* bcdCDC. */ - /* Call Management Functional Descriptor. */ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */ - USB_DESC_BYTE (0x01), /* bDataInterface. */ - /* ACM Functional Descriptor.*/ - USB_DESC_BYTE (4), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract - Control Management Descriptor). */ - USB_DESC_BYTE (0x02), /* bmCapabilities. */ - /* Union Functional Descriptor.*/ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bMasterInterface (Communication - Class Interface). */ - USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class - Interface). */ - /* Endpoint 2 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_INTERRUPT_REQUEST_EP|0x80, - 0x03, /* bmAttributes (Interrupt). */ - 0x0008, /* wMaxPacketSize. */ - 0xFF), /* bInterval. */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x02, /* bNumEndpoints. */ - 0x0A, /* bInterfaceClass (Data Class - Interface, CDC section 4.5). */ - 0x00, /* bInterfaceSubClass (CDC section - 4.6). */ - 0x00, /* bInterfaceProtocol (CDC section - 4.7). */ - 0x00), /* iInterface. */ - /* Endpoint 3 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00), /* bInterval. */ - /* Endpoint 1 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00) /* bInterval. */ -}; - -/* - * Configuration Descriptor wrapper. - */ -static const USBDescriptor vcom_configuration_descriptor = { - sizeof vcom_configuration_descriptor_data, - vcom_configuration_descriptor_data -}; - -/* - * U.S. English language identifier. - */ -static const uint8_t vcom_string0[] = { - USB_DESC_BYTE(4), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ -}; - -/* - * Vendor string. - */ -static const uint8_t vcom_string1[] = { - USB_DESC_BYTE(38), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0, - 'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0, - 'c', 0, 's', 0 -}; - -/* - * Device Description string. - */ -static const uint8_t vcom_string2[] = { - USB_DESC_BYTE(56), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0, - 'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0, - 'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0, - 'o', 0, 'r', 0, 't', 0 -}; - -/* - * Serial Number string. - */ -static const uint8_t vcom_string3[] = { - USB_DESC_BYTE(8), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - '0' + CH_KERNEL_MAJOR, 0, - '0' + CH_KERNEL_MINOR, 0, - '0' + CH_KERNEL_PATCH, 0 -}; - -/* - * Strings wrappers array. - */ -static const USBDescriptor vcom_strings[] = { - {sizeof vcom_string0, vcom_string0}, - {sizeof vcom_string1, vcom_string1}, - {sizeof vcom_string2, vcom_string2}, - {sizeof vcom_string3, vcom_string3} -}; - -/* - * Handles the GET_DESCRIPTOR callback. All required descriptors must be - * handled here. - */ -static const USBDescriptor *get_descriptor(USBDriver *usbp, - uint8_t dtype, - uint8_t dindex, - uint16_t lang) { - - (void)usbp; - (void)lang; - switch (dtype) { - case USB_DESCRIPTOR_DEVICE: - return &vcom_device_descriptor; - case USB_DESCRIPTOR_CONFIGURATION: - return &vcom_configuration_descriptor; - case USB_DESCRIPTOR_STRING: - if (dindex < 4) - return &vcom_strings[dindex]; - } - return NULL; -} - -/** - * @brief IN EP1 state. - */ -static USBInEndpointState ep1instate; - -/** - * @brief OUT EP1 state. - */ -static USBOutEndpointState ep1outstate; - -/** - * @brief EP1 initialization structure (both IN and OUT). - */ -static const USBEndpointConfig ep1config = { - USB_EP_MODE_TYPE_BULK, - NULL, - sduDataTransmitted, - sduDataReceived, - 0x0040, - 0x0040, - &ep1instate, - &ep1outstate, - 1, - NULL -}; - -/** - * @brief IN EP2 state. - */ -static USBInEndpointState ep2instate; - -/** - * @brief EP2 initialization structure (IN only). - */ -static const USBEndpointConfig ep2config = { - USB_EP_MODE_TYPE_INTR, - NULL, - sduInterruptTransmitted, - NULL, - 0x0010, - 0x0000, - &ep2instate, - NULL, - 1, - NULL -}; - -/* - * Handles the USB driver global events. - */ -static void usb_event(USBDriver *usbp, usbevent_t event) { - - switch (event) { - case USB_EVENT_RESET: - return; - case USB_EVENT_ADDRESS: - return; - case USB_EVENT_CONFIGURED: - chSysLockFromIsr(); - - /* Enables the endpoints specified into the configuration. - Note, this callback is invoked from an ISR so I-Class functions - must be used.*/ - usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config); - usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config); - - /* Resetting the state of the CDC subsystem.*/ - sduConfigureHookI(&SDU1); - - chSysUnlockFromIsr(); - return; - case USB_EVENT_SUSPEND: - return; - case USB_EVENT_WAKEUP: - return; - case USB_EVENT_STALLED: - return; - } - return; -} - -/* - * USB driver configuration. - */ -static const USBConfig usbcfg = { - usb_event, - get_descriptor, - sduRequestsHook, - NULL -}; - -/* - * Serial over USB driver configuration. - */ -static const SerialUSBConfig serusbcfg = { - &USBD1, - USBD1_DATA_REQUEST_EP, - USBD1_DATA_AVAILABLE_EP, - USBD1_INTERRUPT_REQUEST_EP -}; - -/*===========================================================================*/ -/* Command line related. */ -/*===========================================================================*/ - -#define SHELL_WA_SIZE THD_WA_SIZE(2048) -#define TEST_WA_SIZE THD_WA_SIZE(256) - -static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) { - size_t n, size; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: mem\r\n"); - return; - } - n = chHeapStatus(NULL, &size); - chprintf(chp, "core free memory : %u bytes\r\n", chCoreStatus()); - chprintf(chp, "heap fragments : %u\r\n", n); - chprintf(chp, "heap free total : %u bytes\r\n", size); -} - -static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) { - static const char *states[] = {THD_STATE_NAMES}; - Thread *tp; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: threads\r\n"); - return; - } - chprintf(chp, " addr stack prio refs state time\r\n"); - tp = chRegFirstThread(); - do { - chprintf(chp, "%.8lx %.8lx %4lu %4lu %9s %lu\r\n", - (uint32_t)tp, (uint32_t)tp->p_ctx.r13, - (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1), - states[tp->p_state], (uint32_t)tp->p_time); - tp = chRegNextThread(tp); - } while (tp != NULL); -} - -static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) { - Thread *tp; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: test\r\n"); - return; - } - tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriority(), - TestThread, chp); - if (tp == NULL) { - chprintf(chp, "out of memory\r\n"); - return; - } - chThdWait(tp); -} - -static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) { - static uint8_t buf[] = - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: write\r\n"); - return; - } - - while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) { - chSequentialStreamWrite(&SDU1, buf, sizeof buf - 1); - } - chprintf(chp, "\r\n\nstopped\r\n"); -} - -static const ShellCommand commands[] = { - {"mem", cmd_mem}, - {"threads", cmd_threads}, - {"test", cmd_test}, - {"write", cmd_write}, - {NULL, NULL} -}; - -static const ShellConfig shell_cfg1 = { - (BaseSequentialStream *)&SDU1, - commands -}; - -/*===========================================================================*/ -/* Generic code. */ -/*===========================================================================*/ - -/* - * Red LED blinker thread, times are in milliseconds. - */ -static WORKING_AREA(waThread1, 128); -static msg_t Thread1(void *arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - systime_t time = serusbcfg.usbp->state == USB_ACTIVE ? 250 : 500; - palClearPad(GPIOC, GPIOC_LED1); - chThdSleepMilliseconds(time); - palSetPad(GPIOC, GPIOC_LED1); - chThdSleepMilliseconds(time); - } -} - -/* - * Application entry point. - */ -int main(void) { - Thread *shelltp = NULL; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes a serial-over-USB CDC driver. - */ - sduObjectInit(&SDU1); - sduStart(&SDU1, &serusbcfg); - - /* - * Activates the USB driver and then the USB bus pull-up on D+. - * Note, a delay is inserted in order to not have to disconnect the cable - * after a reset. - */ - usbDisconnectBus(serusbcfg.usbp); - chThdSleepMilliseconds(1500); - usbStart(serusbcfg.usbp, &usbcfg); - usbConnectBus(serusbcfg.usbp); - - /* - * Shell manager initialization. - */ - shellInit(); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing except - * sleeping in a loop and check the button state. - */ - while (TRUE) { - if (!shelltp && (SDU1.config->usbp->state == USB_ACTIVE)) - shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO); - else if (chThdTerminated(shelltp)) { - chThdRelease(shelltp); /* Recovers memory of the previous shell. */ - shelltp = NULL; /* Triggers spawning of a new shell. */ - } - chThdSleepMilliseconds(1000); - } -} diff --git a/testhal/STM32F37x/USB_CDC/mcuconf.h b/testhal/STM32F37x/USB_CDC/mcuconf.h deleted file mode 100644 index 4d4320200..000000000 --- a/testhal/STM32F37x/USB_CDC/mcuconf.h +++ /dev/null @@ -1,208 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F37x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_SDPRE STM32_SDPRE_DIV12 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_SDADC1 FALSE -#define STM32_ADC_USE_SDADC2 FALSE -#define STM32_ADC_USE_SDADC3 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC2_DMA_PRIORITY 2 -#define STM32_ADC_SDADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_DMA_IRQ_PRIORITY 5 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_23_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32F37x/USB_CDC/readme.txt b/testhal/STM32F37x/USB_CDC/readme.txt deleted file mode 100644 index 1c0755213..000000000 --- a/testhal/STM32F37x/USB_CDC/readme.txt +++ /dev/null @@ -1,26 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - USB-CDC driver demo for STM32F37x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32373C-EVAL board. - -** The Demo ** - -The application demonstrates the use of the STM32F37x USB driver. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F4xx/ADC/.cproject b/testhal/STM32F4xx/ADC/.cproject deleted file mode 100644 index b279459f3..000000000 --- a/testhal/STM32F4xx/ADC/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F4xx/ADC/.project b/testhal/STM32F4xx/ADC/.project deleted file mode 100644 index eafa4d503..000000000 --- a/testhal/STM32F4xx/ADC/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F4xx-ADC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32F4_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F4xx/ADC/Makefile b/testhal/STM32F4xx/ADC/Makefile deleted file mode 100644 index 86de6d81c..000000000 --- a/testhal/STM32F4xx/ADC/Makefile +++ /dev/null @@ -1,222 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32F4_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F4xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F407xG.ld -#LDSCRIPT= $(PORTLD)/STM32F407xG_CCM.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/chprintf.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F4xx/ADC/chconf.h b/testhal/STM32F4xx/ADC/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F4xx/ADC/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/ADC/halconf.h b/testhal/STM32F4xx/ADC/halconf.h deleted file mode 100644 index 85a5dbd3b..000000000 --- a/testhal/STM32F4xx/ADC/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC TRUE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/ADC/main.c b/testhal/STM32F4xx/ADC/main.c deleted file mode 100644 index 650347f76..000000000 --- a/testhal/STM32F4xx/ADC/main.c +++ /dev/null @@ -1,160 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#define ADC_GRP1_NUM_CHANNELS 1 -#define ADC_GRP1_BUF_DEPTH 8 - -#define ADC_GRP2_NUM_CHANNELS 8 -#define ADC_GRP2_BUF_DEPTH 16 - -static adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH]; -static adcsample_t samples2[ADC_GRP2_NUM_CHANNELS * ADC_GRP2_BUF_DEPTH]; - -/* - * ADC streaming callback. - */ -size_t nx = 0, ny = 0; -static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) { - - (void)adcp; - if (samples2 == buffer) { - nx += n; - } - else { - ny += n; - } -} - -static void adcerrorcallback(ADCDriver *adcp, adcerror_t err) { - - (void)adcp; - (void)err; -} - -/* - * ADC conversion group. - * Mode: Linear buffer, 8 samples of 1 channel, SW triggered. - * Channels: IN11. - */ -static const ADCConversionGroup adcgrpcfg1 = { - FALSE, - ADC_GRP1_NUM_CHANNELS, - NULL, - adcerrorcallback, - 0, /* CR1 */ - ADC_CR2_SWSTART, /* CR2 */ - ADC_SMPR1_SMP_AN11(ADC_SAMPLE_3), - 0, /* SMPR2 */ - ADC_SQR1_NUM_CH(ADC_GRP1_NUM_CHANNELS), - 0, /* SQR2 */ - ADC_SQR3_SQ1_N(ADC_CHANNEL_IN11) -}; - -/* - * ADC conversion group. - * Mode: Continuous, 16 samples of 8 channels, SW triggered. - * Channels: IN11, IN12, IN11, IN12, IN11, IN12, Sensor, VRef. - */ -static const ADCConversionGroup adcgrpcfg2 = { - TRUE, - ADC_GRP2_NUM_CHANNELS, - adccallback, - adcerrorcallback, - 0, /* CR1 */ - ADC_CR2_SWSTART, /* CR2 */ - ADC_SMPR1_SMP_AN12(ADC_SAMPLE_56) | ADC_SMPR1_SMP_AN11(ADC_SAMPLE_56) | - ADC_SMPR1_SMP_SENSOR(ADC_SAMPLE_144) | ADC_SMPR1_SMP_VREF(ADC_SAMPLE_144), - 0, /* SMPR2 */ - ADC_SQR1_NUM_CH(ADC_GRP2_NUM_CHANNELS), - ADC_SQR2_SQ8_N(ADC_CHANNEL_SENSOR) | ADC_SQR2_SQ7_N(ADC_CHANNEL_VREFINT), - ADC_SQR3_SQ6_N(ADC_CHANNEL_IN12) | ADC_SQR3_SQ5_N(ADC_CHANNEL_IN11) | - ADC_SQR3_SQ4_N(ADC_CHANNEL_IN12) | ADC_SQR3_SQ3_N(ADC_CHANNEL_IN11) | - ADC_SQR3_SQ2_N(ADC_CHANNEL_IN12) | ADC_SQR3_SQ1_N(ADC_CHANNEL_IN11) -}; - -/* - * Red LEDs blinker thread, times are in milliseconds. - */ -static WORKING_AREA(waThread1, 128); -static msg_t Thread1(void *arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - palSetPad(GPIOD, GPIOD_LED5); - chThdSleepMilliseconds(500); - palClearPad(GPIOD, GPIOD_LED5); - chThdSleepMilliseconds(500); - } -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Setting up analog inputs used by the demo. - */ - palSetGroupMode(GPIOC, PAL_PORT_BIT(1) | PAL_PORT_BIT(2), - 0, PAL_MODE_INPUT_ANALOG); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Activates the ADC1 driver and the temperature sensor. - */ - adcStart(&ADCD1, NULL); - adcSTM32EnableTSVREFE(); - - /* - * Linear conversion. - */ - adcConvert(&ADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH); - chThdSleepMilliseconds(1000); - - /* - * Starts an ADC continuous conversion. - */ - adcStartConversion(&ADCD1, &adcgrpcfg2, samples2, ADC_GRP2_BUF_DEPTH); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - if (palReadPad(GPIOA, GPIOA_BUTTON)) { - adcStopConversion(&ADCD1); - adcSTM32DisableTSVREFE(); - } - chThdSleepMilliseconds(500); - } -} diff --git a/testhal/STM32F4xx/ADC/mcuconf.h b/testhal/STM32F4xx/ADC/mcuconf.h deleted file mode 100644 index 10e1fae6c..000000000 --- a/testhal/STM32F4xx/ADC/mcuconf.h +++ /dev/null @@ -1,278 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_VOS STM32_VOS_HIGH -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 TRUE -#define STM32_ADC_USE_ADC2 TRUE -#define STM32_ADC_USE_ADC3 TRUE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C3_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32F4xx/ADC/readme.txt b/testhal/STM32F4xx/ADC/readme.txt deleted file mode 100644 index af029649b..000000000 --- a/testhal/STM32F4xx/ADC/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - ADC driver demo for STM32F4xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F4-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F4xx ADC driver. - -** Board Setup ** - -- Connect PC1 to 3.3V and PC2 to GND for analog measurements. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F4xx/CAN/.cproject b/testhal/STM32F4xx/CAN/.cproject deleted file mode 100644 index 41abe3d02..000000000 --- a/testhal/STM32F4xx/CAN/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F4xx/CAN/.project b/testhal/STM32F4xx/CAN/.project deleted file mode 100644 index 3c1df9502..000000000 --- a/testhal/STM32F4xx/CAN/.project +++ /dev/null @@ -1,90 +0,0 @@ - - - STM32F4xx-CAN - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j1 - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32F4_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F4xx/CAN/Makefile b/testhal/STM32F4xx/CAN/Makefile deleted file mode 100644 index 62d0516f0..000000000 --- a/testhal/STM32F4xx/CAN/Makefile +++ /dev/null @@ -1,221 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32F4_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F4xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F407xG.ld -#LDSCRIPT= $(PORTLD)/STM32F407xG_CCM.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F4xx/CAN/chconf.h b/testhal/STM32F4xx/CAN/chconf.h deleted file mode 100644 index f943ea80c..000000000 --- a/testhal/STM32F4xx/CAN/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE FALSE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/CAN/halconf.h b/testhal/STM32F4xx/CAN/halconf.h deleted file mode 100644 index 5b6535967..000000000 --- a/testhal/STM32F4xx/CAN/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN TRUE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/CAN/main.c b/testhal/STM32F4xx/CAN/main.c deleted file mode 100644 index 8202afe1e..000000000 --- a/testhal/STM32F4xx/CAN/main.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -struct can_instance { - CANDriver *canp; - uint32_t led; -}; - -static const struct can_instance can1 = {&CAND1, GPIOD_LED5}; -static const struct can_instance can2 = {&CAND2, GPIOD_LED3}; - -/* - * Internal loopback mode, 500KBaud, automatic wakeup, automatic recover - * from abort mode. - * See section 22.7.7 on the STM32 reference manual. - */ -static const CANConfig cancfg = { - CAN_MCR_ABOM | CAN_MCR_AWUM | CAN_MCR_TXFP, - CAN_BTR_LBKM | CAN_BTR_SJW(0) | CAN_BTR_TS2(1) | - CAN_BTR_TS1(8) | CAN_BTR_BRP(6) -}; - -/* - * Receiver thread. - */ -static WORKING_AREA(can_rx1_wa, 256); -static WORKING_AREA(can_rx2_wa, 256); -static msg_t can_rx(void *p) { - struct can_instance *cip = p; - EventListener el; - CANRxFrame rxmsg; - - (void)p; - chRegSetThreadName("receiver"); - chEvtRegister(&cip->canp->rxfull_event, &el, 0); - while(!chThdShouldTerminate()) { - if (chEvtWaitAnyTimeout(ALL_EVENTS, MS2ST(100)) == 0) - continue; - while (canReceive(cip->canp, CAN_ANY_MAILBOX, - &rxmsg, TIME_IMMEDIATE) == RDY_OK) { - /* Process message.*/ - palTogglePad(GPIOD, cip->led); - } - } - chEvtUnregister(&CAND1.rxfull_event, &el); - return 0; -} - -/* - * Transmitter thread. - */ -static WORKING_AREA(can_tx_wa, 256); -static msg_t can_tx(void * p) { - CANTxFrame txmsg; - - (void)p; - chRegSetThreadName("transmitter"); - txmsg.IDE = CAN_IDE_EXT; - txmsg.EID = 0x01234567; - txmsg.RTR = CAN_RTR_DATA; - txmsg.DLC = 8; - txmsg.data32[0] = 0x55AA55AA; - txmsg.data32[1] = 0x00FF00FF; - - while (!chThdShouldTerminate()) { - canTransmit(&CAND1, CAN_ANY_MAILBOX, &txmsg, MS2ST(100)); - canTransmit(&CAND2, CAN_ANY_MAILBOX, &txmsg, MS2ST(100)); - chThdSleepMilliseconds(500); - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the CAN drivers 1 and 2. - */ - canStart(&CAND1, &cancfg); - canStart(&CAND2, &cancfg); - - /* - * Starting the transmitter and receiver threads. - */ - chThdCreateStatic(can_rx1_wa, sizeof(can_rx1_wa), NORMALPRIO + 7, - can_rx, (void *)&can1); - chThdCreateStatic(can_rx2_wa, sizeof(can_rx2_wa), NORMALPRIO + 7, - can_rx, (void *)&can2); - chThdCreateStatic(can_tx_wa, sizeof(can_tx_wa), NORMALPRIO + 7, - can_tx, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F4xx/CAN/mcuconf.h b/testhal/STM32F4xx/CAN/mcuconf.h deleted file mode 100644 index e0dffb5de..000000000 --- a/testhal/STM32F4xx/CAN/mcuconf.h +++ /dev/null @@ -1,278 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_VOS STM32_VOS_HIGH -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 TRUE -#define STM32_CAN_USE_CAN2 TRUE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C3_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32F4xx/CAN/readme.txt b/testhal/STM32F4xx/CAN/readme.txt deleted file mode 100644 index 5884567ac..000000000 --- a/testhal/STM32F4xx/CAN/readme.txt +++ /dev/null @@ -1,26 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - CAN driver demo for STM32. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F4-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32 CAN driver. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F4xx/DMA_STORM/.cproject b/testhal/STM32F4xx/DMA_STORM/.cproject deleted file mode 100644 index 4b78ef53c..000000000 --- a/testhal/STM32F4xx/DMA_STORM/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F4xx/DMA_STORM/.project b/testhal/STM32F4xx/DMA_STORM/.project deleted file mode 100644 index fdacc2794..000000000 --- a/testhal/STM32F4xx/DMA_STORM/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F4xx-DMA_STORM - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32F4_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F4xx/DMA_STORM/Makefile b/testhal/STM32F4xx/DMA_STORM/Makefile deleted file mode 100644 index 86de6d81c..000000000 --- a/testhal/STM32F4xx/DMA_STORM/Makefile +++ /dev/null @@ -1,222 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32F4_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F4xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F407xG.ld -#LDSCRIPT= $(PORTLD)/STM32F407xG_CCM.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/chprintf.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F4xx/DMA_STORM/chconf.h b/testhal/STM32F4xx/DMA_STORM/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F4xx/DMA_STORM/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/DMA_STORM/halconf.h b/testhal/STM32F4xx/DMA_STORM/halconf.h deleted file mode 100644 index e2b440694..000000000 --- a/testhal/STM32F4xx/DMA_STORM/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC TRUE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/DMA_STORM/main.c b/testhal/STM32F4xx/DMA_STORM/main.c deleted file mode 100644 index a3193fcc1..000000000 --- a/testhal/STM32F4xx/DMA_STORM/main.c +++ /dev/null @@ -1,229 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include - -#include "ch.h" -#include "hal.h" - -#define ADC_GRP2_NUM_CHANNELS 8 -#define ADC_GRP2_BUF_DEPTH 16 - -static adcsample_t samples2[ADC_GRP2_NUM_CHANNELS * ADC_GRP2_BUF_DEPTH]; - -static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) { - - (void)adcp; - (void)buffer; - (void)n; -} - -static void adcerrorcallback(ADCDriver *adcp, adcerror_t err) { - - (void)adcp; - (void)err; - chSysHalt(); -} - -/* - * ADC conversion group. - * Mode: Continuous, 16 samples of 8 channels, SW triggered. - * Channels: IN11, IN12, IN11, IN12, IN11, IN12, Sensor, VRef. - */ -static const ADCConversionGroup adcgrpcfg2 = { - TRUE, - ADC_GRP2_NUM_CHANNELS, - adccallback, - adcerrorcallback, - 0, /* CR1 */ - ADC_CR2_SWSTART, /* CR2 */ - ADC_SMPR1_SMP_AN12(ADC_SAMPLE_56) | ADC_SMPR1_SMP_AN11(ADC_SAMPLE_56) | - ADC_SMPR1_SMP_SENSOR(ADC_SAMPLE_144) | ADC_SMPR1_SMP_VREF(ADC_SAMPLE_144), - 0, /* SMPR2 */ - ADC_SQR1_NUM_CH(ADC_GRP2_NUM_CHANNELS), - ADC_SQR2_SQ8_N(ADC_CHANNEL_SENSOR) | ADC_SQR2_SQ7_N(ADC_CHANNEL_VREFINT), - ADC_SQR3_SQ6_N(ADC_CHANNEL_IN12) | ADC_SQR3_SQ5_N(ADC_CHANNEL_IN11) | - ADC_SQR3_SQ4_N(ADC_CHANNEL_IN12) | ADC_SQR3_SQ3_N(ADC_CHANNEL_IN11) | - ADC_SQR3_SQ2_N(ADC_CHANNEL_IN12) | ADC_SQR3_SQ1_N(ADC_CHANNEL_IN11) -}; - -/* - * Maximum speed SPI configuration (21MHz, CPHA=0, CPOL=0, MSb first). - */ -static const SPIConfig hs_spicfg = { - NULL, - GPIOB, - 12, - 0 -}; - -static void tmo(void *p) { - - (void)p; - chSysHalt(); -} - -/* - * SPI thread. - */ -static WORKING_AREA(waSPI1, 1024); -static WORKING_AREA(waSPI2, 1024); -static WORKING_AREA(waSPI3, 1024); -static msg_t spi_thread(void *p) { - unsigned i; - SPIDriver *spip = (SPIDriver *)p; - VirtualTimer vt; - uint8_t txbuf[256]; - uint8_t rxbuf[256]; - - /* Prepare transmit pattern.*/ - for (i = 0; i < sizeof(txbuf); i++) - txbuf[i] = (uint8_t)i; - - /* Continuous transmission.*/ - while (TRUE) { - /* Starts a VT working as watchdog to catch a malfunction in the SPI - driver.*/ - chSysLock(); - chVTSetI(&vt, MS2ST(10), tmo, NULL); - chSysUnlock(); - - spiExchange(spip, sizeof(txbuf), txbuf, rxbuf); - - /* Stops the watchdog.*/ - chSysLock(); - if (chVTIsArmedI(&vt)) - chVTResetI(&vt); - chSysUnlock(); - } -} - -/* - * This is a periodic thread that does absolutely nothing except flashing - * a LED. - */ -static WORKING_AREA(waThread1, 128); -static msg_t Thread1(void *arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - palSetPad(GPIOD, GPIOD_LED3); /* Orange. */ - chThdSleepMilliseconds(500); - palClearPad(GPIOD, GPIOD_LED3); /* Orange. */ - chThdSleepMilliseconds(500); - } -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - static uint8_t patterns1[4096], patterns2[4096], buf1[4096], buf2[4096]; - - /* System initializations. - - HAL initialization, this also initializes the configured device drivers - and performs the board-specific initializations. - - Kernel initialization, the main() function becomes a thread and the - RTOS is active.*/ - halInit(); - chSysInit(); - - /* Creates the blinker thread.*/ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO + 10, - Thread1, NULL); - - /* Activates the ADC1 driver and the temperature sensor.*/ - adcStart(&ADCD1, NULL); - adcSTM32EnableTSVREFE(); - - /* Starts an ADC continuous conversion.*/ - adcStartConversion(&ADCD1, &adcgrpcfg2, samples2, ADC_GRP2_BUF_DEPTH); - - /* Activating SPI drivers.*/ - spiStart(&SPID1, &hs_spicfg); - spiStart(&SPID2, &hs_spicfg); - spiStart(&SPID3, &hs_spicfg); - - /* Starting SPI threads instances.*/ - chThdCreateStatic(waSPI1, sizeof(waSPI1), NORMALPRIO + 1, spi_thread, &SPID1); - chThdCreateStatic(waSPI2, sizeof(waSPI2), NORMALPRIO + 1, spi_thread, &SPID2); - chThdCreateStatic(waSPI3, sizeof(waSPI3), NORMALPRIO + 1, spi_thread, &SPID3); - - /* Allocating two DMA2 streams for memory copy operations.*/ - if (dmaStreamAllocate(STM32_DMA2_STREAM6, 0, NULL, NULL)) - chSysHalt(); - if (dmaStreamAllocate(STM32_DMA2_STREAM7, 0, NULL, NULL)) - chSysHalt(); - for (i = 0; i < sizeof (patterns1); i++) - patterns1[i] = (uint8_t)i; - for (i = 0; i < sizeof (patterns2); i++) - patterns2[i] = (uint8_t)(i ^ 0xAA); - - /* Normal main() thread activity, it does continues memory copy operations - using 2 DMA streams at the lowest priority.*/ - while (TRUE) { - VirtualTimer vt; - - /* Starts a VT working as watchdog to catch a malfunction in the DMA - driver.*/ - chSysLock(); - chVTSetI(&vt, MS2ST(10), tmo, NULL); - chSysUnlock(); - - /* Copy pattern 1.*/ - dmaStartMemCopy(STM32_DMA2_STREAM6, - STM32_DMA_CR_PL(0) | STM32_DMA_CR_PSIZE_BYTE | - STM32_DMA_CR_MSIZE_BYTE, - patterns1, buf1, sizeof (patterns1)); - dmaStartMemCopy(STM32_DMA2_STREAM7, - STM32_DMA_CR_PL(0) | STM32_DMA_CR_PSIZE_BYTE | - STM32_DMA_CR_MSIZE_BYTE, - patterns1, buf2, sizeof (patterns1)); - dmaWaitCompletion(STM32_DMA2_STREAM6); - dmaWaitCompletion(STM32_DMA2_STREAM7); - if (memcmp(patterns1, buf1, sizeof (patterns1))) - chSysHalt(); - if (memcmp(patterns1, buf2, sizeof (patterns1))) - chSysHalt(); - - /* Copy pattern 2.*/ - dmaStartMemCopy(STM32_DMA2_STREAM6, - STM32_DMA_CR_PL(0) | STM32_DMA_CR_PSIZE_BYTE | - STM32_DMA_CR_MSIZE_BYTE, - patterns2, buf1, sizeof (patterns2)); - dmaStartMemCopy(STM32_DMA2_STREAM7, - STM32_DMA_CR_PL(0) | STM32_DMA_CR_PSIZE_BYTE | - STM32_DMA_CR_MSIZE_BYTE, - patterns2, buf2, sizeof (patterns2)); - dmaWaitCompletion(STM32_DMA2_STREAM6); - dmaWaitCompletion(STM32_DMA2_STREAM7); - if (memcmp(patterns2, buf1, sizeof (patterns2))) - chSysHalt(); - if (memcmp(patterns2, buf2, sizeof (patterns2))) - chSysHalt(); - - /* Stops the watchdog.*/ - chSysLock(); - if (chVTIsArmedI(&vt)) - chVTResetI(&vt); - chSysUnlock(); - - chThdSleepMilliseconds(2); - } - return 0; -} diff --git a/testhal/STM32F4xx/DMA_STORM/mcuconf.h b/testhal/STM32F4xx/DMA_STORM/mcuconf.h deleted file mode 100644 index 84cd9a0f1..000000000 --- a/testhal/STM32F4xx/DMA_STORM/mcuconf.h +++ /dev/null @@ -1,278 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_VOS STM32_VOS_HIGH -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 TRUE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C3_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 TRUE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32F4xx/EXT/.cproject b/testhal/STM32F4xx/EXT/.cproject deleted file mode 100644 index 59e262be9..000000000 --- a/testhal/STM32F4xx/EXT/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F4xx/EXT/.project b/testhal/STM32F4xx/EXT/.project deleted file mode 100644 index b4ae995c3..000000000 --- a/testhal/STM32F4xx/EXT/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F4xx-EXT - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32F4_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F4xx/EXT/Makefile b/testhal/STM32F4xx/EXT/Makefile deleted file mode 100644 index 86de6d81c..000000000 --- a/testhal/STM32F4xx/EXT/Makefile +++ /dev/null @@ -1,222 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32F4_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F4xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F407xG.ld -#LDSCRIPT= $(PORTLD)/STM32F407xG_CCM.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/chprintf.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F4xx/EXT/chconf.h b/testhal/STM32F4xx/EXT/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F4xx/EXT/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/EXT/halconf.h b/testhal/STM32F4xx/EXT/halconf.h deleted file mode 100644 index e0e0c38ff..000000000 --- a/testhal/STM32F4xx/EXT/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/EXT/main.c b/testhal/STM32F4xx/EXT/main.c deleted file mode 100644 index 1bdce5a09..000000000 --- a/testhal/STM32F4xx/EXT/main.c +++ /dev/null @@ -1,101 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void led5off(void *arg) { - - (void)arg; - palClearPad(GPIOD, GPIOD_LED5); -} - -/* Triggered when the button is pressed or released. The LED5 is set to ON.*/ -static void extcb1(EXTDriver *extp, expchannel_t channel) { - static VirtualTimer vt4; - - (void)extp; - (void)channel; - - palSetPad(GPIOD, GPIOD_LED5); - chSysLockFromIsr(); - if (chVTIsArmedI(&vt4)) - chVTResetI(&vt4); - - /* LED4 set to OFF after 200mS.*/ - chVTSetI(&vt4, MS2ST(200), led5off, NULL); - chSysUnlockFromIsr(); -} - -static const EXTConfig extcfg = { - { - {EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOA, extcb1}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL} - } -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the EXT driver 1. - */ - extStart(&EXTD1, &extcfg); - - /* - * Normal main() thread activity, in this demo it enables and disables the - * button EXT channel using 5 seconds intervals. - */ - while (TRUE) { - chThdSleepMilliseconds(5000); - extChannelDisable(&EXTD1, 0); - chThdSleepMilliseconds(5000); - extChannelEnable(&EXTD1, 0); - } -} diff --git a/testhal/STM32F4xx/EXT/mcuconf.h b/testhal/STM32F4xx/EXT/mcuconf.h deleted file mode 100644 index 172f90b30..000000000 --- a/testhal/STM32F4xx/EXT/mcuconf.h +++ /dev/null @@ -1,278 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_VOS STM32_VOS_HIGH -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C3_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32F4xx/EXT/readme.txt b/testhal/STM32F4xx/EXT/readme.txt deleted file mode 100644 index 1105f431e..000000000 --- a/testhal/STM32F4xx/EXT/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - EXT driver demo for STM32F4xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F4-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F4xx EXT driver. - -** Board Setup ** - -None required. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F4xx/GPT/.cproject b/testhal/STM32F4xx/GPT/.cproject deleted file mode 100644 index 4933adfbb..000000000 --- a/testhal/STM32F4xx/GPT/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F4xx/GPT/.project b/testhal/STM32F4xx/GPT/.project deleted file mode 100644 index 90014959c..000000000 --- a/testhal/STM32F4xx/GPT/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F4xx-GPT - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32F4_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F4xx/GPT/Makefile b/testhal/STM32F4xx/GPT/Makefile deleted file mode 100644 index 86de6d81c..000000000 --- a/testhal/STM32F4xx/GPT/Makefile +++ /dev/null @@ -1,222 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32F4_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F4xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F407xG.ld -#LDSCRIPT= $(PORTLD)/STM32F407xG_CCM.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/chprintf.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F4xx/GPT/chconf.h b/testhal/STM32F4xx/GPT/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F4xx/GPT/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/GPT/halconf.h b/testhal/STM32F4xx/GPT/halconf.h deleted file mode 100644 index 554b4e9ca..000000000 --- a/testhal/STM32F4xx/GPT/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/GPT/main.c b/testhal/STM32F4xx/GPT/main.c deleted file mode 100644 index 4b0031dc3..000000000 --- a/testhal/STM32F4xx/GPT/main.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * GPT2 callback. - */ -static void gpt2cb(GPTDriver *gptp) { - - (void)gptp; - palSetPad(GPIOD, GPIOD_LED5); - chSysLockFromIsr(); - gptStartOneShotI(&GPTD3, 1000); /* 0.1 second pulse.*/ - chSysUnlockFromIsr(); -} - -/* - * GPT3 callback. - */ -static void gpt3cb(GPTDriver *gptp) { - - (void)gptp; - palClearPad(GPIOD, GPIOD_LED5); -} - -/* - * GPT2 configuration. - */ -static const GPTConfig gpt2cfg = { - 10000, /* 10kHz timer clock.*/ - gpt2cb /* Timer callback.*/ -}; - -/* - * GPT3 configuration. - */ -static const GPTConfig gpt3cfg = { - 10000, /* 10kHz timer clock.*/ - gpt3cb /* Timer callback.*/ -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes the GPT drivers 2 and 3. - */ - gptStart(&GPTD2, &gpt2cfg); - gptPolledDelay(&GPTD2, 10); /* Small delay.*/ - gptStart(&GPTD3, &gpt3cfg); - gptPolledDelay(&GPTD3, 10); /* Small delay.*/ - - /* - * Normal main() thread activity, it changes the GPT1 period every - * five seconds. - */ - while (TRUE) { - palSetPad(GPIOD, GPIOD_LED4); - gptStartContinuous(&GPTD2, 5000); - chThdSleepMilliseconds(5000); - gptStopTimer(&GPTD2); - palClearPad(GPIOD, GPIOD_LED4); - gptStartContinuous(&GPTD2, 2500); - chThdSleepMilliseconds(5000); - gptStopTimer(&GPTD2); - } -} diff --git a/testhal/STM32F4xx/GPT/mcuconf.h b/testhal/STM32F4xx/GPT/mcuconf.h deleted file mode 100644 index ffc39aa31..000000000 --- a/testhal/STM32F4xx/GPT/mcuconf.h +++ /dev/null @@ -1,278 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_VOS STM32_VOS_HIGH -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 TRUE -#define STM32_GPT_USE_TIM2 TRUE -#define STM32_GPT_USE_TIM3 TRUE -#define STM32_GPT_USE_TIM4 TRUE -#define STM32_GPT_USE_TIM5 TRUE -#define STM32_GPT_USE_TIM8 TRUE -#define STM32_GPT_USE_TIM7 TRUE -#define STM32_GPT_USE_TIM8 TRUE -#define STM32_GPT_USE_TIM9 TRUE -#define STM32_GPT_USE_TIM11 TRUE -#define STM32_GPT_USE_TIM12 TRUE -#define STM32_GPT_USE_TIM14 TRUE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C3_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32F4xx/GPT/readme.txt b/testhal/STM32F4xx/GPT/readme.txt deleted file mode 100644 index 1508a8233..000000000 --- a/testhal/STM32F4xx/GPT/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - GPT driver demo for STM32F4xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F4-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F4xx GPT driver. - -** Board Setup ** - -None required. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F4xx/I2C/.cproject b/testhal/STM32F4xx/I2C/.cproject deleted file mode 100644 index 5effe9a53..000000000 --- a/testhal/STM32F4xx/I2C/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F4xx/I2C/.project b/testhal/STM32F4xx/I2C/.project deleted file mode 100644 index c506abb10..000000000 --- a/testhal/STM32F4xx/I2C/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F4xx-I2C - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/NONSTANDARD_STM32F4_BARTHESS1 - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F4xx/I2C/Makefile b/testhal/STM32F4xx/I2C/Makefile deleted file mode 100644 index d52f5d4e8..000000000 --- a/testhal/STM32F4xx/I2C/Makefile +++ /dev/null @@ -1,222 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/NONSTANDARD_STM32F4_BARTHESS1/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F4xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F407xG.ld -#LDSCRIPT= $(PORTLD)/STM32F407xG_CCM.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/chprintf.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F4xx/I2C/chconf.h b/testhal/STM32F4xx/I2C/chconf.h deleted file mode 100644 index 9357b698c..000000000 --- a/testhal/STM32F4xx/I2C/chconf.h +++ /dev/null @@ -1,508 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -//#define CORTEX_VTOR_INIT 0x000E0000 -#define CORTEX_VTOR_INIT 0x00000000 - -/*===========================================================================*/ -/* Kernel parameters. */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 0//20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/*===========================================================================*/ -/* Performance options. */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED FALSE -#endif - -/*===========================================================================*/ -/* Subsystem options. */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS FALSE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT FALSE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP FALSE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC FALSE -#endif - -/*===========================================================================*/ -/* Debug options. */ -/*===========================================================================*/ -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/*===========================================================================*/ -/* Kernel hooks. */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/I2C/halconf.h b/testhal/STM32F4xx/I2C/halconf.h deleted file mode 100644 index 8f77e1d4a..000000000 --- a/testhal/STM32F4xx/I2C/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/I2C/main.c b/testhal/STM32F4xx/I2C/main.c deleted file mode 100644 index e83a98ffd..000000000 --- a/testhal/STM32F4xx/I2C/main.c +++ /dev/null @@ -1,181 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ -/* - Concepts and parts of this file have been contributed by Uladzimir Pylinsky - aka barthess. - */ - -/** - * This demo acquire data from accelerometer and prints it in shell. - */ - -#include - -#include "ch.h" -#include "hal.h" - -/* buffers depth */ -#define ACCEL_RX_DEPTH 6 -#define ACCEL_TX_DEPTH 4 - -/* mma8451q specific addresses */ -#define ACCEL_OUT_DATA 0x01 -#define ACCEL_CTRL_REG1 0x2A - -static uint8_t rxbuf[ACCEL_RX_DEPTH]; -static uint8_t txbuf[ACCEL_TX_DEPTH]; -static i2cflags_t errors = 0; -static int16_t acceleration_x, acceleration_y, acceleration_z; -#define mma8451_addr 0b0011100 - -/** - * - */ -static void print(char *p) { - - while (*p) { - sdPut(&SD2, *p++); - } -} - -/** - * - */ -static void println(char *p) { - - while (*p) { - sdPut(&SD2, *p++); - } - sdWriteTimeout(&SD2, (uint8_t *)"\r\n", 2, TIME_INFINITE); -} - -/** - * - */ -static void printn(int16_t n) { - char buf[16], *p; - - if (n > 0) - sdPut(&SD2, '+'); - else{ - sdPut(&SD2, '-'); - n = abs(n); - } - - if (!n) - sdPut(&SD2, '0'); - else { - p = buf; - while (n) - *p++ = (n % 10) + '0', n /= 10; - while (p > buf) - sdPut(&SD2, *--p); - } -} - -/** - * Converts data from 2complemented representation to signed integer - */ -int16_t complement2signed(uint8_t msb, uint8_t lsb){ - uint16_t word = 0; - word = (msb << 8) + lsb; - if (msb > 0x7F){ - return -1 * ((int16_t)((~word) + 1)); - } - return (int16_t)word; -} - -/* I2C interface #2 */ -static const I2CConfig i2cfg2 = { - OPMODE_I2C, - 400000, - FAST_DUTY_CYCLE_2, -}; - -/* - * Application entry point. - */ -int main(void) { - msg_t status = RDY_OK; - systime_t tmo = MS2ST(4); - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Starts I2C - */ - i2cStart(&I2CD2, &i2cfg2); - - /* - * Prepares the Serial driver 2 - */ - sdStart(&SD2, NULL); /* Default is 38400-8-N-1.*/ - palSetPadMode(GPIOA, 2, PAL_MODE_ALTERNATE(7)); - palSetPadMode(GPIOA, 3, PAL_MODE_ALTERNATE(7)); - - /** - * Prepares the accelerometer - */ - txbuf[0] = ACCEL_CTRL_REG1; /* register address */ - txbuf[1] = 0x1; - i2cAcquireBus(&I2CD2); - status = i2cMasterTransmitTimeout(&I2CD2, mma8451_addr, txbuf, 2, rxbuf, 0, tmo); - i2cReleaseBus(&I2CD2); - - if (status != RDY_OK){ - errors = i2cGetErrors(&I2CD2); - } - - /* - * Normal main() thread activity, nothing in this test. - */ - while (TRUE) { - palTogglePad(GPIOB, GPIOB_LED_B); - chThdSleepMilliseconds(100); - - txbuf[0] = ACCEL_OUT_DATA; /* register address */ - i2cAcquireBus(&I2CD2); - status = i2cMasterTransmitTimeout(&I2CD2, mma8451_addr, txbuf, 1, rxbuf, 6, tmo); - i2cReleaseBus(&I2CD2); - - if (status != RDY_OK){ - errors = i2cGetErrors(&I2CD2); - } - - acceleration_x = complement2signed(rxbuf[0], rxbuf[1]); - acceleration_y = complement2signed(rxbuf[2], rxbuf[3]); - acceleration_z = complement2signed(rxbuf[4], rxbuf[5]); - - print("x: "); - printn(acceleration_x); - print(" y: "); - printn(acceleration_y); - print(" z: "); - printn(acceleration_z); - println(""); - } -} - - - diff --git a/testhal/STM32F4xx/I2C/mcuconf.h b/testhal/STM32F4xx/I2C/mcuconf.h deleted file mode 100644 index da3dba336..000000000 --- a/testhal/STM32F4xx/I2C/mcuconf.h +++ /dev/null @@ -1,278 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_VOS STM32_VOS_HIGH -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 TRUE -#define STM32_I2C_USE_I2C2 TRUE -#define STM32_I2C_USE_I2C3 TRUE -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C3_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32F4xx/IRQ_STORM/.cproject b/testhal/STM32F4xx/IRQ_STORM/.cproject deleted file mode 100644 index 1e9c4518b..000000000 --- a/testhal/STM32F4xx/IRQ_STORM/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F4xx/IRQ_STORM/.project b/testhal/STM32F4xx/IRQ_STORM/.project deleted file mode 100644 index 6f3b0385f..000000000 --- a/testhal/STM32F4xx/IRQ_STORM/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F4xx-IRQ_STORM - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32F4_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F4xx/IRQ_STORM/Makefile b/testhal/STM32F4xx/IRQ_STORM/Makefile deleted file mode 100644 index 86de6d81c..000000000 --- a/testhal/STM32F4xx/IRQ_STORM/Makefile +++ /dev/null @@ -1,222 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32F4_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F4xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F407xG.ld -#LDSCRIPT= $(PORTLD)/STM32F407xG_CCM.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/chprintf.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F4xx/IRQ_STORM/chconf.h b/testhal/STM32F4xx/IRQ_STORM/chconf.h deleted file mode 100644 index 38242d75d..000000000 --- a/testhal/STM32F4xx/IRQ_STORM/chconf.h +++ /dev/null @@ -1,533 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE FALSE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#define CORTEX_USE_FPU FALSE - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/IRQ_STORM/halconf.h b/testhal/STM32F4xx/IRQ_STORM/halconf.h deleted file mode 100644 index 117a5979b..000000000 --- a/testhal/STM32F4xx/IRQ_STORM/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/IRQ_STORM/iar/ch.ewp b/testhal/STM32F4xx/IRQ_STORM/iar/ch.ewp deleted file mode 100644 index ffd2532c1..000000000 --- a/testhal/STM32F4xx/IRQ_STORM/iar/ch.ewp +++ /dev/null @@ -1,2289 +0,0 @@ - - - - 2 - - Debug - - ARM - - 1 - - General - 3 - - 21 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ICCARM - 2 - - 28 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - AARM - 2 - - 8 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - OBJCOPY - 0 - - 1 - 1 - 1 - - - - - - - - - CUSTOM - 3 - - - - - - - BICOMP - 0 - - - - BUILDACTION - 1 - - - - - - - ILINK - 0 - - 14 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - IARCHIVE - 0 - - 0 - 1 - 1 - - - - - - - BILINK - 0 - - - - - Release - - ARM - - 0 - - General - 3 - - 21 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ICCARM - 2 - - 28 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - AARM - 2 - - 8 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - OBJCOPY - 0 - - 1 - 1 - 0 - - - - - - - - - CUSTOM - 3 - - - - - - - BICOMP - 0 - - - - BUILDACTION - 1 - - - - - - - ILINK - 0 - - 14 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - IARCHIVE - 0 - - 0 - 1 - 0 - - - - - - - BILINK - 0 - - - - - board - - $PROJ_DIR$\..\..\..\..\boards\ST_STM32f4_DISCOVERY\board.c - - - $PROJ_DIR$\..\..\..\..\boards\ST_STM32f4_DISCOVERY\board.h - - - - os - - hal - - include - - $PROJ_DIR$\..\..\..\..\os\hal\include\adc.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\can.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\ext.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\gpt.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\hal.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\i2c.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\icu.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\mac.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\mii.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\mmc_spi.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\pal.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\pwm.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\rtc.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\sdc.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\serial.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\serial_usb.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\spi.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\tm.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\uart.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\usb.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\usb_cdc.h - - - - src - - $PROJ_DIR$\..\..\..\..\os\hal\src\adc.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\can.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\ext.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\gpt.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\hal.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\i2c.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\icu.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\mac.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\mmc_spi.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\pal.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\pwm.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\rtc.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\sdc.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\serial.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\serial_usb.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\spi.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\tm.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\uart.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\usb.c - - - - - kernel - - include - - $PROJ_DIR$\..\..\..\..\os\kernel\include\ch.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chcond.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chdebug.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chdynamic.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chevents.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chheap.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chinline.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chioch.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chlists.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chmboxes.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chmemcore.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chmempools.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chmsg.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chmtx.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chqueues.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chregistry.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chschd.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chsem.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chstreams.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chsys.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chthreads.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chvt.h - - - - src - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chcond.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chdebug.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chdynamic.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chevents.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chheap.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chlists.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chmboxes.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chmemcore.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chmempools.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chmsg.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chmtx.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chqueues.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chregistry.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chschd.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chsem.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chsys.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chthreads.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chvt.c - - - - - platform - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\gpt_lld.c - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\gpt_lld.h - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32f4xx\hal_lld.c - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32f4xx\hal_lld.h - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\GPIOv2\pal_lld.c - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\GPIOv2\pal_lld.h - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\USARTv1\serial_lld.c - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\USARTv1\serial_lld.h - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\SPIv1\spi_lld.c - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\SPIv1\spi_lld.h - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32f4xx\stm32_dma.c - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32f4xx\stm32_dma.h - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32f4xx\stm32f4xx.h - - - - port - - STM32F4xx - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\STM32f4xx\cmparams.h - - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\STM32f4xx\vectors.s - - - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chcore.c - - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chcore.h - - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chcore_v7m.c - - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chcore_v7m.h - - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chcoreasm_v7m.s - - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chtypes.h - - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\cstartup.s - - - $PROJ_DIR$\..\..\..\..\os\ports\common\ARMCMx\nvic.c - - - $PROJ_DIR$\..\..\..\..\os\ports\common\ARMCMx\nvic.h - - - - - test - - $PROJ_DIR$\..\..\..\..\test\test.c - - - $PROJ_DIR$\..\..\..\..\test\test.h - - - $PROJ_DIR$\..\..\..\..\test\testbmk.c - - - $PROJ_DIR$\..\..\..\..\test\testbmk.h - - - $PROJ_DIR$\..\..\..\..\test\testdyn.c - - - $PROJ_DIR$\..\..\..\..\test\testdyn.h - - - $PROJ_DIR$\..\..\..\..\test\testevt.c - - - $PROJ_DIR$\..\..\..\..\test\testevt.h - - - $PROJ_DIR$\..\..\..\..\test\testheap.c - - - $PROJ_DIR$\..\..\..\..\test\testheap.h - - - $PROJ_DIR$\..\..\..\..\test\testmbox.c - - - $PROJ_DIR$\..\..\..\..\test\testmbox.h - - - $PROJ_DIR$\..\..\..\..\test\testmsg.c - - - $PROJ_DIR$\..\..\..\..\test\testmsg.h - - - $PROJ_DIR$\..\..\..\..\test\testmtx.c - - - $PROJ_DIR$\..\..\..\..\test\testmtx.h - - - $PROJ_DIR$\..\..\..\..\test\testpools.c - - - $PROJ_DIR$\..\..\..\..\test\testpools.h - - - $PROJ_DIR$\..\..\..\..\test\testqueues.c - - - $PROJ_DIR$\..\..\..\..\test\testqueues.h - - - $PROJ_DIR$\..\..\..\..\test\testsem.c - - - $PROJ_DIR$\..\..\..\..\test\testsem.h - - - $PROJ_DIR$\..\..\..\..\test\testthd.c - - - $PROJ_DIR$\..\..\..\..\test\testthd.h - - - - $PROJ_DIR$\..\chconf.h - - - $PROJ_DIR$\..\halconf.h - - - $PROJ_DIR$\..\main.c - - - $PROJ_DIR$\..\mcuconf.h - - - - diff --git a/testhal/STM32F4xx/IRQ_STORM/iar/ch.eww b/testhal/STM32F4xx/IRQ_STORM/iar/ch.eww deleted file mode 100644 index f9b3b2000..000000000 --- a/testhal/STM32F4xx/IRQ_STORM/iar/ch.eww +++ /dev/null @@ -1,10 +0,0 @@ - - - - - $WS_DIR$\ch.ewp - - - - - diff --git a/testhal/STM32F4xx/IRQ_STORM/iar/ch.icf b/testhal/STM32F4xx/IRQ_STORM/iar/ch.icf deleted file mode 100644 index c0a51f44c..000000000 --- a/testhal/STM32F4xx/IRQ_STORM/iar/ch.icf +++ /dev/null @@ -1,39 +0,0 @@ -/*###ICF### Section handled by ICF editor, don't touch! ****/ -/*-Editor annotation file-*/ -/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ -/*-Specials-*/ -define symbol __ICFEDIT_intvec_start__ = 0x08000000; -/*-Memory Regions-*/ -define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; -define symbol __ICFEDIT_region_ROM_end__ = 0x0801FFFF; -define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; -define symbol __ICFEDIT_region_RAM_end__ = 0x2001FFFF; -/*-Sizes-*/ -define symbol __ICFEDIT_size_cstack__ = 0x400; -define symbol __ICFEDIT_size_heap__ = 0x400; -/**** End of ICF editor section. ###ICF###*/ - -/* Size of the IRQ Stack (Main Stack).*/ -define symbol __ICFEDIT_size_irqstack__ = 0x400; - -define memory mem with size = 4G; -define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; -define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; - -define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ {section CSTACK}; -define block IRQSTACK with alignment = 8, size = __ICFEDIT_size_irqstack__ {}; -define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ {}; -define block SYSHEAP with alignment = 8 {section SYSHEAP}; -define block DATABSS with alignment = 8 {readwrite, zeroinit}; - -initialize by copy { readwrite }; -do not initialize { section .noinit }; - -keep { section .intvec }; - -place at address mem:__ICFEDIT_intvec_start__ {section .intvec}; -place in ROM_region {readonly}; -place at start of RAM_region {block IRQSTACK}; -place in RAM_region {block DATABSS, block HEAP}; -place in RAM_region {block SYSHEAP}; -place at end of RAM_region {block CSTACK}; diff --git a/testhal/STM32F4xx/IRQ_STORM/keil/ch.uvproj b/testhal/STM32F4xx/IRQ_STORM/keil/ch.uvproj deleted file mode 100644 index b5e042b8a..000000000 --- a/testhal/STM32F4xx/IRQ_STORM/keil/ch.uvproj +++ /dev/null @@ -1,945 +0,0 @@ - - - - 1.1 - -
### uVision Project, (C) Keil Software
- - - - Demo - 0x4 - ARM-ADS - - - STM32F407VG - STMicroelectronics - IRAM(0x20000000-0x2001FFFF) IRAM2(0x10000000-0x1000FFFF) IROM(0x8000000-0x80FFFFF) CLOCK(25000000) CPUTYPE("Cortex-M4") FPU2 - - "Startup\ST\STM32F4xx\startup_stm32f4xx.s" ("STM32F4xx Startup Code") - UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000) - 6103 - stm32f4xx.h - - - - - - - - - - SFD\ST\STM32F4xx\STM32F4xx.sfr - 0 - - - - ST\STM32F4xx\ - ST\STM32F4xx\ - - 0 - 0 - 0 - 0 - 1 - - .\obj\ - ch - 1 - 0 - 0 - 1 - 1 - .\lst\ - 1 - 0 - 0 - - 0 - 0 - - - 0 - 0 - - - 0 - 0 - - - 0 - 0 - - - 0 - 0 - - - 0 - 0 - - 0 - - - - 0 - 0 - 0 - 0 - 0 - 1 - 0 - 0 - 0 - 0 - 3 - - - - - SARMCM3.DLL - -MPU - DCM.DLL - -pCM4 - SARMCM3.DLL - -MPU - TCM.DLL - -pCM4 - - - - 1 - 0 - 0 - 0 - 16 - - - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - - - 1 - 1 - 0 - 1 - 1 - 1 - 0 - 1 - - 0 - 8 - - - - - - - - - - - - - - STLink\ST-LINKIII-KEIL.dll - - - - - 1 - 0 - 0 - 1 - 1 - 4100 - - STLink\ST-LINKIII-KEIL.dll - "" () - - - - - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 1 - 1 - 0 - 1 - 1 - 0 - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 0 - "Cortex-M4" - - 0 - 0 - 0 - 1 - 1 - 0 - 0 - 2 - 1 - 0 - 8 - 0 - 0 - 0 - 3 - 3 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 1 - 0 - 0 - 0 - 0 - 1 - 1 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x20000000 - 0x20000 - - - 1 - 0x8000000 - 0x100000 - - - 0 - 0x0 - 0x0 - - - 1 - 0x0 - 0x0 - - - 1 - 0x0 - 0x0 - - - 1 - 0x0 - 0x0 - - - 1 - 0x8000000 - 0x100000 - - - 1 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x20000000 - 0x20000 - - - 0 - 0x20020000 - 0x1 - - - - - - 1 - 4 - 1 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - - - __heap_base__=Image$$RW_IRAM1$$ZI$$Limit __heap_end__=Image$$RW_IRAM2$$Base - - ..\;..\..\..\..\os\kernel\include;..\..\..\..\os\ports\common\ARMCMx;..\..\..\..\os\ports\common\ARMCMx\CMSIS\include;..\..\..\..\os\ports\RVCT\ARMCMx;..\..\..\..\os\ports\RVCT\ARMCMx\STM32F4xx;..\..\..\..\os\hal\include;..\..\..\..\os\hal\platforms\STM32;..\..\..\..\os\hal\platforms\STM32\GPIOv2;..\..\..\..\os\hal\platforms\STM32\USARTv1;..\..\..\..\os\hal\platforms\STM32F4xx;..\..\..\..\boards\ST_STM32F4_DISCOVERY;..\..\..\..\test - - - - 1 - 0 - 0 - 0 - 0 - 0 - 0 - - --cpreproc - - - ..\;..\..\..\..\boards\ST_STM32F4_DISCOVERY;..\..\..\..\os\ports\RVCT\ARMCMx\STM32F4xx - - - - 1 - 0 - 0 - 0 - 1 - 0 - 0x08000000 - 0x20000000 - - - - - - - - - - - - board - - - board.c - 1 - ..\..\..\..\boards\ST_STM32F4_DISCOVERY\board.c - - - board.h - 5 - ..\..\..\..\boards\ST_STM32F4_DISCOVERY\board.h - - - - - port - - - cstartup.s - 2 - ..\..\..\..\os\ports\RVCT\ARMCMx\cstartup.s - - - chcoreasm_v7m.s - 2 - ..\..\..\..\os\ports\RVCT\ARMCMx\chcoreasm_v7m.s - - - chcore.c - 1 - ..\..\..\..\os\ports\RVCT\ARMCMx\chcore.c - - - chcore_v7m.c - 1 - ..\..\..\..\os\ports\RVCT\ARMCMx\chcore_v7m.c - - - chcore.h - 5 - ..\..\..\..\os\ports\RVCT\ARMCMx\chcore.h - - - chcore_v7m.h - 5 - ..\..\..\..\os\ports\RVCT\ARMCMx\chcore_v7m.h - - - chtypes.h - 5 - ..\..\..\..\os\ports\RVCT\ARMCMx\chtypes.h - - - cmparams.h - 5 - ..\..\..\..\os\ports\RVCT\ARMCMx\STM32F4xx\cmparams.h - - - vectors.s - 2 - ..\..\..\..\os\ports\RVCT\ARMCMx\STM32F4xx\vectors.s - - - nvic.c - 1 - ..\..\..\..\os\ports\common\ARMCMx\nvic.c - - - nvic.h - 5 - ..\..\..\..\os\ports\common\ARMCMx\nvic.h - - - - - kernel - - - chcond.c - 1 - ..\..\..\..\os\kernel\src\chcond.c - - - chdebug.c - 1 - ..\..\..\..\os\kernel\src\chdebug.c - - - chdynamic.c - 1 - ..\..\..\..\os\kernel\src\chdynamic.c - - - chevents.c - 1 - ..\..\..\..\os\kernel\src\chevents.c - - - chheap.c - 1 - ..\..\..\..\os\kernel\src\chheap.c - - - chlists.c - 1 - ..\..\..\..\os\kernel\src\chlists.c - - - chmboxes.c - 1 - ..\..\..\..\os\kernel\src\chmboxes.c - - - chmemcore.c - 1 - ..\..\..\..\os\kernel\src\chmemcore.c - - - chmempools.c - 1 - ..\..\..\..\os\kernel\src\chmempools.c - - - chmsg.c - 1 - ..\..\..\..\os\kernel\src\chmsg.c - - - chmtx.c - 1 - ..\..\..\..\os\kernel\src\chmtx.c - - - chqueues.c - 1 - ..\..\..\..\os\kernel\src\chqueues.c - - - chregistry.c - 1 - ..\..\..\..\os\kernel\src\chregistry.c - - - chschd.c - 1 - ..\..\..\..\os\kernel\src\chschd.c - - - chsem.c - 1 - ..\..\..\..\os\kernel\src\chsem.c - - - chsys.c - 1 - ..\..\..\..\os\kernel\src\chsys.c - - - chthreads.c - 1 - ..\..\..\..\os\kernel\src\chthreads.c - - - chvt.c - 1 - ..\..\..\..\os\kernel\src\chvt.c - - - ch.h - 5 - ..\..\..\..\os\kernel\include\ch.h - - - chbsem.h - 5 - ..\..\..\..\os\kernel\include\chbsem.h - - - chcond.h - 5 - ..\..\..\..\os\kernel\include\chcond.h - - - chdebug.h - 5 - ..\..\..\..\os\kernel\include\chdebug.h - - - chdynamic.h - 5 - ..\..\..\..\os\kernel\include\chdynamic.h - - - chevents.h - 5 - ..\..\..\..\os\kernel\include\chevents.h - - - chfiles.h - 5 - ..\..\..\..\os\kernel\include\chfiles.h - - - chheap.h - 5 - ..\..\..\..\os\kernel\include\chheap.h - - - chinline.h - 5 - ..\..\..\..\os\kernel\include\chinline.h - - - chioch.h - 5 - ..\..\..\..\os\kernel\include\chioch.h - - - chlists.h - 5 - ..\..\..\..\os\kernel\include\chlists.h - - - chmboxes.h - 5 - ..\..\..\..\os\kernel\include\chmboxes.h - - - chmemcore.h - 5 - ..\..\..\..\os\kernel\include\chmemcore.h - - - chmempools.h - 5 - ..\..\..\..\os\kernel\include\chmempools.h - - - chmsg.h - 5 - ..\..\..\..\os\kernel\include\chmsg.h - - - chmtx.h - 5 - ..\..\..\..\os\kernel\include\chmtx.h - - - chqueues.h - 5 - ..\..\..\..\os\kernel\include\chqueues.h - - - chregistry.h - 5 - ..\..\..\..\os\kernel\include\chregistry.h - - - chschd.h - 5 - ..\..\..\..\os\kernel\include\chschd.h - - - chsem.h - 5 - ..\..\..\..\os\kernel\include\chsem.h - - - chstreams.h - 5 - ..\..\..\..\os\kernel\include\chstreams.h - - - chsys.h - 5 - ..\..\..\..\os\kernel\include\chsys.h - - - chthreads.h - 5 - ..\..\..\..\os\kernel\include\chthreads.h - - - chvt.h - 5 - ..\..\..\..\os\kernel\include\chvt.h - - - - - hal - - - hal.c - 1 - ..\..\..\..\os\hal\src\hal.c - - - pal.c - 1 - ..\..\..\..\os\hal\src\pal.c - - - serial.c - 1 - ..\..\..\..\os\hal\src\serial.c - - - hal.h - 5 - ..\..\..\..\os\hal\include\hal.h - - - pal.h - 5 - ..\..\..\..\os\hal\include\pal.h - - - serial.h - 5 - ..\..\..\..\os\hal\include\serial.h - - - gpt.h - 5 - ..\..\..\..\os\hal\include\gpt.h - - - gpt.c - 1 - ..\..\..\..\os\hal\src\gpt.c - - - tm.c - 1 - ..\..\..\..\os\hal\src\tm.c - - - - - platform - - - gpt_lld.h - 5 - ..\..\..\..\os\hal\platforms\STM32\gpt_lld.h - - - gpt_lld.c - 1 - ..\..\..\..\os\hal\platforms\STM32\gpt_lld.c - - - hal_lld.c - 1 - ..\..\..\..\os\hal\platforms\STM32F4xx\hal_lld.c - - - hal_lld.h - 5 - ..\..\..\..\os\hal\platforms\STM32F4xx\hal_lld.h - - - pal_lld.c - 1 - ..\..\..\..\os\hal\platforms\STM32\GPIOv2\pal_lld.c - - - pal_lld.h - 5 - ..\..\..\..\os\hal\platforms\STM32\GPIOv2\pal_lld.h - - - serial_lld.c - 1 - ..\..\..\..\os\hal\platforms\STM32\USARTv1\serial_lld.c - - - serial_lld.h - 5 - ..\..\..\..\os\hal\platforms\STM32\USARTv1\serial_lld.h - - - stm32_dma.c - 1 - ..\..\..\..\os\hal\platforms\STM32F4xx\stm32_dma.c - - - stm32_dma.h - 5 - ..\..\..\..\os\hal\platforms\STM32F4xx\stm32_dma.h - - - stm32_rcc.h - 5 - ..\..\..\..\os\hal\platforms\STM32F4xx\stm32_rcc.h - - - stm32l1xx.h - 5 - ..\..\..\..\os\hal\platforms\STM32F4xx\stm32l1xx.h - - - - - test - - - test.c - 1 - ..\..\..\..\test\test.c - - - testbmk.c - 1 - ..\..\..\..\test\testbmk.c - - - testdyn.c - 1 - ..\..\..\..\test\testdyn.c - - - testevt.c - 1 - ..\..\..\..\test\testevt.c - - - testheap.c - 1 - ..\..\..\..\test\testheap.c - - - testmbox.c - 1 - ..\..\..\..\test\testmbox.c - - - testmsg.c - 1 - ..\..\..\..\test\testmsg.c - - - testmtx.c - 1 - ..\..\..\..\test\testmtx.c - - - testpools.c - 1 - ..\..\..\..\test\testpools.c - - - testqueues.c - 1 - ..\..\..\..\test\testqueues.c - - - testsem.c - 1 - ..\..\..\..\test\testsem.c - - - testthd.c - 1 - ..\..\..\..\test\testthd.c - - - test.h - 5 - ..\..\..\..\test\test.h - - - testbmk.h - 5 - ..\..\..\..\test\testbmk.h - - - testdyn.h - 5 - ..\..\..\..\test\testdyn.h - - - testevt.h - 5 - ..\..\..\..\test\testevt.h - - - testheap.h - 5 - ..\..\..\..\test\testheap.h - - - testmbox.h - 5 - ..\..\..\..\test\testmbox.h - - - testmsg.h - 5 - ..\..\..\..\test\testmsg.h - - - testmtx.h - 5 - ..\..\..\..\test\testmtx.h - - - testpools.h - 5 - ..\..\..\..\test\testpools.h - - - testqueues.h - 5 - ..\..\..\..\test\testqueues.h - - - testsem.h - 5 - ..\..\..\..\test\testsem.h - - - testthd.h - 5 - ..\..\..\..\test\testthd.h - - - - - demo - - - main.c - 1 - ..\main.c - - - mcuconf.h - 5 - ..\mcuconf.h - - - chconf.h - 5 - ..\chconf.h - - - halconf.h - 5 - ..\halconf.h - - - - - - - - diff --git a/testhal/STM32F4xx/IRQ_STORM/main.c b/testhal/STM32F4xx/IRQ_STORM/main.c deleted file mode 100644 index 905af44fe..000000000 --- a/testhal/STM32F4xx/IRQ_STORM/main.c +++ /dev/null @@ -1,327 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include - -#include "ch.h" -#include "hal.h" - -/*===========================================================================*/ -/* Configurable settings. */ -/*===========================================================================*/ - -#ifndef RANDOMIZE -#define RANDOMIZE FALSE -#endif - -#ifndef ITERATIONS -#define ITERATIONS 100 -#endif - -#ifndef NUM_THREADS -#define NUM_THREADS 4 -#endif - -#ifndef MAILBOX_SIZE -#define MAILBOX_SIZE 4 -#endif - -/*===========================================================================*/ -/* Test related code. */ -/*===========================================================================*/ - -#define MSG_SEND_LEFT 0 -#define MSG_SEND_RIGHT 1 - -static bool_t saturated; - -/* - * Mailboxes and buffers. - */ -static Mailbox mb[NUM_THREADS]; -static msg_t b[NUM_THREADS][MAILBOX_SIZE]; - -/* - * Test worker threads. - */ -static WORKING_AREA(waWorkerThread[NUM_THREADS], 128); -static msg_t WorkerThread(void *arg) { - static volatile unsigned x = 0; - static unsigned cnt = 0; - unsigned me = (unsigned)arg; - unsigned target; - unsigned r; - msg_t msg; - - chRegSetThreadName("worker"); - - /* Work loop.*/ - while (TRUE) { - /* Waiting for a message.*/ - chMBFetch(&mb[me], &msg, TIME_INFINITE); - -#if RANDOMIZE - /* Pseudo-random delay.*/ - { - chSysLock(); - r = rand() & 15; - chSysUnlock(); - while (r--) - x++; - } -#else - /* Fixed delay.*/ - { - r = me >> 4; - while (r--) - x++; - } -#endif - - /* Deciding in which direction to re-send the message.*/ - if (msg == MSG_SEND_LEFT) - target = me - 1; - else - target = me + 1; - - if (target < NUM_THREADS) { - /* If this thread is not at the end of a chain re-sending the message, - note this check works because the variable target is unsigned.*/ - msg = chMBPost(&mb[target], msg, TIME_IMMEDIATE); - if (msg != RDY_OK) - saturated = TRUE; - } - else { - /* Provides a visual feedback about the system.*/ - if (++cnt >= 500) { - cnt = 0; - palTogglePad(GPIOD, GPIOD_LED5); - } - } - } -} - -/* - * GPT2 callback. - */ -static void gpt2cb(GPTDriver *gptp) { - msg_t msg; - - (void)gptp; - chSysLockFromIsr(); - msg = chMBPostI(&mb[0], MSG_SEND_RIGHT); - if (msg != RDY_OK) - saturated = TRUE; - chSysUnlockFromIsr(); -} - -/* - * GPT3 callback. - */ -static void gpt3cb(GPTDriver *gptp) { - msg_t msg; - - (void)gptp; - chSysLockFromIsr(); - msg = chMBPostI(&mb[NUM_THREADS - 1], MSG_SEND_LEFT); - if (msg != RDY_OK) - saturated = TRUE; - chSysUnlockFromIsr(); -} - -/* - * GPT2 configuration. - */ -static const GPTConfig gpt2cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt2cb /* Timer callback.*/ -}; - -/* - * GPT3 configuration. - */ -static const GPTConfig gpt3cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt3cb /* Timer callback.*/ -}; - - -/*===========================================================================*/ -/* Generic demo code. */ -/*===========================================================================*/ - -static void print(char *p) { - - while (*p) { - chSequentialStreamPut(&SD2, *p++); - } -} - -static void println(char *p) { - - while (*p) { - chSequentialStreamPut(&SD2, *p++); - } - chSequentialStreamWrite(&SD2, (uint8_t *)"\r\n", 2); -} - -static void printn(uint32_t n) { - char buf[16], *p; - - if (!n) - chSequentialStreamPut(&SD2, '0'); - else { - p = buf; - while (n) - *p++ = (n % 10) + '0', n /= 10; - while (p > buf) - chSequentialStreamPut(&SD2, *--p); - } -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - gptcnt_t interval, threshold, worst; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Prepares the Serial driver 2 and GPT drivers 2 and 3. - */ - sdStart(&SD2, NULL); /* Default is 38400-8-N-1.*/ - palSetPadMode(GPIOA, 2, PAL_MODE_ALTERNATE(7)); - palSetPadMode(GPIOA, 3, PAL_MODE_ALTERNATE(7)); - gptStart(&GPTD2, &gpt2cfg); - gptStart(&GPTD3, &gpt3cfg); - - /* - * Initializes the mailboxes and creates the worker threads. - */ - for (i = 0; i < NUM_THREADS; i++) { - chMBInit(&mb[i], b[i], MAILBOX_SIZE); - chThdCreateStatic(waWorkerThread[i], sizeof waWorkerThread[i], - NORMALPRIO - 20, WorkerThread, (void *)i); - } - - /* - * Test procedure. - */ - println(""); - println("*** ChibiOS/RT IRQ-STORM long duration test"); - println("***"); - print("*** Kernel: "); - println(CH_KERNEL_VERSION); - print("*** Compiled: "); - println(__DATE__ " - " __TIME__); -#ifdef CH_COMPILER_NAME - print("*** Compiler: "); - println(CH_COMPILER_NAME); -#endif - print("*** Architecture: "); - println(CH_ARCHITECTURE_NAME); -#ifdef CH_CORE_VARIANT_NAME - print("*** Core Variant: "); - println(CH_CORE_VARIANT_NAME); -#endif -#ifdef CH_PORT_INFO - print("*** Port Info: "); - println(CH_PORT_INFO); -#endif -#ifdef PLATFORM_NAME - print("*** Platform: "); - println(PLATFORM_NAME); -#endif -#ifdef BOARD_NAME - print("*** Test Board: "); - println(BOARD_NAME); -#endif - println("***"); - print("*** System Clock: "); - printn(STM32_SYSCLK); - println(""); - print("*** Iterations: "); - printn(ITERATIONS); - println(""); - print("*** Randomize: "); - printn(RANDOMIZE); - println(""); - print("*** Threads: "); - printn(NUM_THREADS); - println(""); - print("*** Mailbox size: "); - printn(MAILBOX_SIZE); - println(""); - - println(""); - worst = 0; - for (i = 1; i <= ITERATIONS; i++){ - print("Iteration "); - printn(i); - println(""); - saturated = FALSE; - threshold = 0; - for (interval = 2000; interval >= 10; interval -= interval / 10) { - gptStartContinuous(&GPTD2, interval - 1); /* Slightly out of phase.*/ - gptStartContinuous(&GPTD3, interval + 1); /* Slightly out of phase.*/ - chThdSleepMilliseconds(1000); - gptStopTimer(&GPTD2); - gptStopTimer(&GPTD3); - if (!saturated) - print("."); - else { - print("#"); - if (threshold == 0) - threshold = interval; - } - } - /* Gives the worker threads a chance to empty the mailboxes before next - cycle.*/ - chThdSleepMilliseconds(20); - println(""); - print("Saturated at "); - printn(threshold); - println(" uS"); - println(""); - if (threshold > worst) - worst = threshold; - } - gptStopTimer(&GPTD2); - gptStopTimer(&GPTD3); - - print("Worst case at "); - printn(worst); - println(" uS"); - println(""); - println("Test Complete"); - - /* - * Normal main() thread activity, nothing in this test. - */ - while (TRUE) { - chThdSleepMilliseconds(5000); - } -} diff --git a/testhal/STM32F4xx/IRQ_STORM/mcuconf.h b/testhal/STM32F4xx/IRQ_STORM/mcuconf.h deleted file mode 100644 index dc10c0604..000000000 --- a/testhal/STM32F4xx/IRQ_STORM/mcuconf.h +++ /dev/null @@ -1,278 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_VOS STM32_VOS_HIGH -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 TRUE -#define STM32_GPT_USE_TIM3 TRUE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 6 -#define STM32_GPT_TIM3_IRQ_PRIORITY 10 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C3_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32F4xx/IRQ_STORM/readme.txt b/testhal/STM32F4xx/IRQ_STORM/readme.txt deleted file mode 100644 index 2b9f076f5..000000000 --- a/testhal/STM32F4xx/IRQ_STORM/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - IRQ_STORM stress test demo for STM32F4xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F4-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F4xx GPT, PAL and Serial -drivers in order to implement a system stress demo. - -** Board Setup ** - -None. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F4xx/IRQ_STORM_FPU/.cproject b/testhal/STM32F4xx/IRQ_STORM_FPU/.cproject deleted file mode 100644 index 22b5f4d43..000000000 --- a/testhal/STM32F4xx/IRQ_STORM_FPU/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F4xx/IRQ_STORM_FPU/.project b/testhal/STM32F4xx/IRQ_STORM_FPU/.project deleted file mode 100644 index 46cb19671..000000000 --- a/testhal/STM32F4xx/IRQ_STORM_FPU/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F4xx-IRQ_STORM_FPU - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32F4_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F4xx/IRQ_STORM_FPU/Makefile b/testhal/STM32F4xx/IRQ_STORM_FPU/Makefile deleted file mode 100644 index 8391b78dc..000000000 --- a/testhal/STM32F4xx/IRQ_STORM_FPU/Makefile +++ /dev/null @@ -1,222 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = yes -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32F4_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F4xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F407xG.ld -#LDSCRIPT= $(PORTLD)/STM32F407xG_CCM.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/chprintf.c \ - extfunc.c main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F4xx/IRQ_STORM_FPU/chconf.h b/testhal/STM32F4xx/IRQ_STORM_FPU/chconf.h deleted file mode 100644 index f943ea80c..000000000 --- a/testhal/STM32F4xx/IRQ_STORM_FPU/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE FALSE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/IRQ_STORM_FPU/extfunc.c b/testhal/STM32F4xx/IRQ_STORM_FPU/extfunc.c deleted file mode 100644 index 0418e3124..000000000 --- a/testhal/STM32F4xx/IRQ_STORM_FPU/extfunc.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -float ff1(float par) { - return par; -} - -float ff2(float par1, float par2, float par3, float par4) { - return (par1 + par2) * (par3 + par4); -} diff --git a/testhal/STM32F4xx/IRQ_STORM_FPU/halconf.h b/testhal/STM32F4xx/IRQ_STORM_FPU/halconf.h deleted file mode 100644 index d91a792b4..000000000 --- a/testhal/STM32F4xx/IRQ_STORM_FPU/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/IRQ_STORM_FPU/iar/ch.ewp b/testhal/STM32F4xx/IRQ_STORM_FPU/iar/ch.ewp deleted file mode 100644 index 186319a4c..000000000 --- a/testhal/STM32F4xx/IRQ_STORM_FPU/iar/ch.ewp +++ /dev/null @@ -1,2292 +0,0 @@ - - - - 2 - - Debug - - ARM - - 1 - - General - 3 - - 21 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ICCARM - 2 - - 28 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - AARM - 2 - - 8 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - OBJCOPY - 0 - - 1 - 1 - 1 - - - - - - - - - CUSTOM - 3 - - - - - - - BICOMP - 0 - - - - BUILDACTION - 1 - - - - - - - ILINK - 0 - - 14 - 1 - 1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - IARCHIVE - 0 - - 0 - 1 - 1 - - - - - - - BILINK - 0 - - - - - Release - - ARM - - 0 - - General - 3 - - 21 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ICCARM - 2 - - 28 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - AARM - 2 - - 8 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - OBJCOPY - 0 - - 1 - 1 - 0 - - - - - - - - - CUSTOM - 3 - - - - - - - BICOMP - 0 - - - - BUILDACTION - 1 - - - - - - - ILINK - 0 - - 14 - 1 - 0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - IARCHIVE - 0 - - 0 - 1 - 0 - - - - - - - BILINK - 0 - - - - - board - - $PROJ_DIR$\..\..\..\..\boards\ST_STM32f4_DISCOVERY\board.c - - - $PROJ_DIR$\..\..\..\..\boards\ST_STM32f4_DISCOVERY\board.h - - - - os - - hal - - include - - $PROJ_DIR$\..\..\..\..\os\hal\include\adc.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\can.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\ext.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\gpt.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\hal.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\i2c.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\icu.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\mac.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\mii.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\mmc_spi.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\pal.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\pwm.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\rtc.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\sdc.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\serial.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\serial_usb.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\spi.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\tm.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\uart.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\usb.h - - - $PROJ_DIR$\..\..\..\..\os\hal\include\usb_cdc.h - - - - src - - $PROJ_DIR$\..\..\..\..\os\hal\src\adc.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\can.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\ext.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\gpt.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\hal.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\i2c.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\icu.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\mac.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\mmc_spi.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\pal.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\pwm.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\rtc.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\sdc.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\serial.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\serial_usb.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\spi.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\tm.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\uart.c - - - $PROJ_DIR$\..\..\..\..\os\hal\src\usb.c - - - - - kernel - - include - - $PROJ_DIR$\..\..\..\..\os\kernel\include\ch.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chcond.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chdebug.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chdynamic.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chevents.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chheap.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chinline.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chioch.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chlists.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chmboxes.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chmemcore.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chmempools.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chmsg.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chmtx.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chqueues.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chregistry.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chschd.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chsem.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chstreams.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chsys.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chthreads.h - - - $PROJ_DIR$\..\..\..\..\os\kernel\include\chvt.h - - - - src - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chcond.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chdebug.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chdynamic.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chevents.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chheap.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chlists.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chmboxes.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chmemcore.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chmempools.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chmsg.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chmtx.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chqueues.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chregistry.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chschd.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chsem.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chsys.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chthreads.c - - - $PROJ_DIR$\..\..\..\..\os\kernel\src\chvt.c - - - - - platform - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\gpt_lld.c - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\gpt_lld.h - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32f4xx\hal_lld.c - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32f4xx\hal_lld.h - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\GPIOv2\pal_lld.c - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\GPIOv2\pal_lld.h - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\USARTv1\serial_lld.c - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\USARTv1\serial_lld.h - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\SPIv1\spi_lld.c - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32\SPIv1\spi_lld.h - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32f4xx\stm32_dma.c - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32f4xx\stm32_dma.h - - - $PROJ_DIR$\..\..\..\..\os\hal\platforms\STM32f4xx\stm32f4xx.h - - - - port - - STM32F4xx - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\STM32f4xx\cmparams.h - - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\STM32f4xx\vectors.s - - - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chcore.c - - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chcore.h - - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chcore_v7m.c - - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chcore_v7m.h - - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chcoreasm_v7m.s - - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\chtypes.h - - - $PROJ_DIR$\..\..\..\..\os\ports\IAR\ARMCMx\cstartup.s - - - $PROJ_DIR$\..\..\..\..\os\ports\common\ARMCMx\nvic.c - - - $PROJ_DIR$\..\..\..\..\os\ports\common\ARMCMx\nvic.h - - - - - test - - $PROJ_DIR$\..\..\..\..\test\test.c - - - $PROJ_DIR$\..\..\..\..\test\test.h - - - $PROJ_DIR$\..\..\..\..\test\testbmk.c - - - $PROJ_DIR$\..\..\..\..\test\testbmk.h - - - $PROJ_DIR$\..\..\..\..\test\testdyn.c - - - $PROJ_DIR$\..\..\..\..\test\testdyn.h - - - $PROJ_DIR$\..\..\..\..\test\testevt.c - - - $PROJ_DIR$\..\..\..\..\test\testevt.h - - - $PROJ_DIR$\..\..\..\..\test\testheap.c - - - $PROJ_DIR$\..\..\..\..\test\testheap.h - - - $PROJ_DIR$\..\..\..\..\test\testmbox.c - - - $PROJ_DIR$\..\..\..\..\test\testmbox.h - - - $PROJ_DIR$\..\..\..\..\test\testmsg.c - - - $PROJ_DIR$\..\..\..\..\test\testmsg.h - - - $PROJ_DIR$\..\..\..\..\test\testmtx.c - - - $PROJ_DIR$\..\..\..\..\test\testmtx.h - - - $PROJ_DIR$\..\..\..\..\test\testpools.c - - - $PROJ_DIR$\..\..\..\..\test\testpools.h - - - $PROJ_DIR$\..\..\..\..\test\testqueues.c - - - $PROJ_DIR$\..\..\..\..\test\testqueues.h - - - $PROJ_DIR$\..\..\..\..\test\testsem.c - - - $PROJ_DIR$\..\..\..\..\test\testsem.h - - - $PROJ_DIR$\..\..\..\..\test\testthd.c - - - $PROJ_DIR$\..\..\..\..\test\testthd.h - - - - $PROJ_DIR$\..\chconf.h - - - $PROJ_DIR$\..\extfunc.c - - - $PROJ_DIR$\..\halconf.h - - - $PROJ_DIR$\..\main.c - - - $PROJ_DIR$\..\mcuconf.h - - - - diff --git a/testhal/STM32F4xx/IRQ_STORM_FPU/iar/ch.eww b/testhal/STM32F4xx/IRQ_STORM_FPU/iar/ch.eww deleted file mode 100644 index f9b3b2000..000000000 --- a/testhal/STM32F4xx/IRQ_STORM_FPU/iar/ch.eww +++ /dev/null @@ -1,10 +0,0 @@ - - - - - $WS_DIR$\ch.ewp - - - - - diff --git a/testhal/STM32F4xx/IRQ_STORM_FPU/iar/ch.icf b/testhal/STM32F4xx/IRQ_STORM_FPU/iar/ch.icf deleted file mode 100644 index c0a51f44c..000000000 --- a/testhal/STM32F4xx/IRQ_STORM_FPU/iar/ch.icf +++ /dev/null @@ -1,39 +0,0 @@ -/*###ICF### Section handled by ICF editor, don't touch! ****/ -/*-Editor annotation file-*/ -/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */ -/*-Specials-*/ -define symbol __ICFEDIT_intvec_start__ = 0x08000000; -/*-Memory Regions-*/ -define symbol __ICFEDIT_region_ROM_start__ = 0x08000000; -define symbol __ICFEDIT_region_ROM_end__ = 0x0801FFFF; -define symbol __ICFEDIT_region_RAM_start__ = 0x20000000; -define symbol __ICFEDIT_region_RAM_end__ = 0x2001FFFF; -/*-Sizes-*/ -define symbol __ICFEDIT_size_cstack__ = 0x400; -define symbol __ICFEDIT_size_heap__ = 0x400; -/**** End of ICF editor section. ###ICF###*/ - -/* Size of the IRQ Stack (Main Stack).*/ -define symbol __ICFEDIT_size_irqstack__ = 0x400; - -define memory mem with size = 4G; -define region ROM_region = mem:[from __ICFEDIT_region_ROM_start__ to __ICFEDIT_region_ROM_end__]; -define region RAM_region = mem:[from __ICFEDIT_region_RAM_start__ to __ICFEDIT_region_RAM_end__]; - -define block CSTACK with alignment = 8, size = __ICFEDIT_size_cstack__ {section CSTACK}; -define block IRQSTACK with alignment = 8, size = __ICFEDIT_size_irqstack__ {}; -define block HEAP with alignment = 8, size = __ICFEDIT_size_heap__ {}; -define block SYSHEAP with alignment = 8 {section SYSHEAP}; -define block DATABSS with alignment = 8 {readwrite, zeroinit}; - -initialize by copy { readwrite }; -do not initialize { section .noinit }; - -keep { section .intvec }; - -place at address mem:__ICFEDIT_intvec_start__ {section .intvec}; -place in ROM_region {readonly}; -place at start of RAM_region {block IRQSTACK}; -place in RAM_region {block DATABSS, block HEAP}; -place in RAM_region {block SYSHEAP}; -place at end of RAM_region {block CSTACK}; diff --git a/testhal/STM32F4xx/IRQ_STORM_FPU/keil/ch.uvproj b/testhal/STM32F4xx/IRQ_STORM_FPU/keil/ch.uvproj deleted file mode 100644 index 0f02f5523..000000000 --- a/testhal/STM32F4xx/IRQ_STORM_FPU/keil/ch.uvproj +++ /dev/null @@ -1,945 +0,0 @@ - - - - 1.1 - -
### uVision Project, (C) Keil Software
- - - - Demo - 0x4 - ARM-ADS - - - STM32F407VG - STMicroelectronics - IRAM(0x20000000-0x2001FFFF) IRAM2(0x10000000-0x1000FFFF) IROM(0x8000000-0x80FFFFF) CLOCK(25000000) CPUTYPE("Cortex-M4") FPU2 - - "Startup\ST\STM32F4xx\startup_stm32f4xx.s" ("STM32F4xx Startup Code") - UL2CM3(-O207 -S0 -C0 -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F4xx_1024 -FS08000000 -FL0100000) - 6103 - stm32f4xx.h - - - - - - - - - - SFD\ST\STM32F4xx\STM32F4xx.sfr - 0 - - - - ST\STM32F4xx\ - ST\STM32F4xx\ - - 0 - 0 - 0 - 0 - 1 - - .\obj\ - ch - 1 - 0 - 0 - 1 - 1 - .\lst\ - 1 - 0 - 0 - - 0 - 0 - - - 0 - 0 - - - 0 - 0 - - - 0 - 0 - - - 0 - 0 - - - 0 - 0 - - 0 - - - - 0 - 0 - 0 - 0 - 0 - 1 - 0 - 0 - 0 - 0 - 3 - - - - - SARMCM3.DLL - -MPU - DCM.DLL - -pCM4 - SARMCM3.DLL - -MPU - TCM.DLL - -pCM4 - - - - 1 - 0 - 0 - 0 - 16 - - - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - - - 1 - 1 - 0 - 1 - 1 - 1 - 0 - 1 - - 0 - 8 - - - - - - - - - - - - - - STLink\ST-LINKIII-KEIL.dll - - - - - 1 - 0 - 0 - 1 - 1 - 4100 - - STLink\ST-LINKIII-KEIL.dll - "" () - - - - - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 1 - 1 - 0 - 1 - 1 - 0 - 0 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 1 - 0 - 0 - "Cortex-M4" - - 0 - 0 - 0 - 1 - 1 - 0 - 0 - 2 - 1 - 0 - 8 - 0 - 0 - 0 - 3 - 3 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 1 - 0 - 0 - 0 - 0 - 1 - 1 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x20000000 - 0x20000 - - - 1 - 0x8000000 - 0x100000 - - - 0 - 0x0 - 0x0 - - - 1 - 0x0 - 0x0 - - - 1 - 0x0 - 0x0 - - - 1 - 0x0 - 0x0 - - - 1 - 0x8000000 - 0x100000 - - - 1 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x0 - 0x0 - - - 0 - 0x20000000 - 0x20000 - - - 0 - 0x20020000 - 0x1 - - - - - - 1 - 4 - 1 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - 0 - - - __heap_base__=Image$$RW_IRAM1$$ZI$$Limit __heap_end__=Image$$RW_IRAM2$$Base - - ..\;..\..\..\..\os\kernel\include;..\..\..\..\os\ports\common\ARMCMx;..\..\..\..\os\ports\common\ARMCMx\CMSIS\include;..\..\..\..\os\ports\RVCT\ARMCMx;..\..\..\..\os\ports\RVCT\ARMCMx\STM32F4xx;..\..\..\..\os\hal\include;..\..\..\..\os\hal\platforms\STM32;..\..\..\..\os\hal\platforms\STM32\GPIOv2;..\..\..\..\os\hal\platforms\STM32\USARTv1;..\..\..\..\os\hal\platforms\STM32F4xx;..\..\..\..\boards\ST_STM32F4_DISCOVERY;..\..\..\..\test - - - - 1 - 0 - 0 - 0 - 0 - 0 - 0 - - --cpreproc - - - ..\;..\..\..\..\boards\ST_STM32F4_DISCOVERY;..\..\..\..\os\ports\RVCT\ARMCMx\STM32F4xx - - - - 1 - 0 - 0 - 0 - 1 - 0 - 0x08000000 - 0x20000000 - - - - - - - - - - - - board - - - board.c - 1 - ..\..\..\..\boards\ST_STM32F4_DISCOVERY\board.c - - - board.h - 5 - ..\..\..\..\boards\ST_STM32F4_DISCOVERY\board.h - - - - - port - - - cstartup.s - 2 - ..\..\..\..\os\ports\RVCT\ARMCMx\cstartup.s - - - chcoreasm_v7m.s - 2 - ..\..\..\..\os\ports\RVCT\ARMCMx\chcoreasm_v7m.s - - - chcore.c - 1 - ..\..\..\..\os\ports\RVCT\ARMCMx\chcore.c - - - chcore_v7m.c - 1 - ..\..\..\..\os\ports\RVCT\ARMCMx\chcore_v7m.c - - - chcore.h - 5 - ..\..\..\..\os\ports\RVCT\ARMCMx\chcore.h - - - chcore_v7m.h - 5 - ..\..\..\..\os\ports\RVCT\ARMCMx\chcore_v7m.h - - - chtypes.h - 5 - ..\..\..\..\os\ports\RVCT\ARMCMx\chtypes.h - - - cmparams.h - 5 - ..\..\..\..\os\ports\RVCT\ARMCMx\STM32F4xx\cmparams.h - - - vectors.s - 2 - ..\..\..\..\os\ports\RVCT\ARMCMx\STM32F4xx\vectors.s - - - nvic.c - 1 - ..\..\..\..\os\ports\common\ARMCMx\nvic.c - - - nvic.h - 5 - ..\..\..\..\os\ports\common\ARMCMx\nvic.h - - - - - kernel - - - chcond.c - 1 - ..\..\..\..\os\kernel\src\chcond.c - - - chdebug.c - 1 - ..\..\..\..\os\kernel\src\chdebug.c - - - chdynamic.c - 1 - ..\..\..\..\os\kernel\src\chdynamic.c - - - chevents.c - 1 - ..\..\..\..\os\kernel\src\chevents.c - - - chheap.c - 1 - ..\..\..\..\os\kernel\src\chheap.c - - - chlists.c - 1 - ..\..\..\..\os\kernel\src\chlists.c - - - chmboxes.c - 1 - ..\..\..\..\os\kernel\src\chmboxes.c - - - chmemcore.c - 1 - ..\..\..\..\os\kernel\src\chmemcore.c - - - chmempools.c - 1 - ..\..\..\..\os\kernel\src\chmempools.c - - - chmsg.c - 1 - ..\..\..\..\os\kernel\src\chmsg.c - - - chmtx.c - 1 - ..\..\..\..\os\kernel\src\chmtx.c - - - chqueues.c - 1 - ..\..\..\..\os\kernel\src\chqueues.c - - - chregistry.c - 1 - ..\..\..\..\os\kernel\src\chregistry.c - - - chschd.c - 1 - ..\..\..\..\os\kernel\src\chschd.c - - - chsem.c - 1 - ..\..\..\..\os\kernel\src\chsem.c - - - chsys.c - 1 - ..\..\..\..\os\kernel\src\chsys.c - - - chthreads.c - 1 - ..\..\..\..\os\kernel\src\chthreads.c - - - chvt.c - 1 - ..\..\..\..\os\kernel\src\chvt.c - - - ch.h - 5 - ..\..\..\..\os\kernel\include\ch.h - - - chbsem.h - 5 - ..\..\..\..\os\kernel\include\chbsem.h - - - chcond.h - 5 - ..\..\..\..\os\kernel\include\chcond.h - - - chdebug.h - 5 - ..\..\..\..\os\kernel\include\chdebug.h - - - chdynamic.h - 5 - ..\..\..\..\os\kernel\include\chdynamic.h - - - chevents.h - 5 - ..\..\..\..\os\kernel\include\chevents.h - - - chfiles.h - 5 - ..\..\..\..\os\kernel\include\chfiles.h - - - chheap.h - 5 - ..\..\..\..\os\kernel\include\chheap.h - - - chinline.h - 5 - ..\..\..\..\os\kernel\include\chinline.h - - - chioch.h - 5 - ..\..\..\..\os\kernel\include\chioch.h - - - chlists.h - 5 - ..\..\..\..\os\kernel\include\chlists.h - - - chmboxes.h - 5 - ..\..\..\..\os\kernel\include\chmboxes.h - - - chmemcore.h - 5 - ..\..\..\..\os\kernel\include\chmemcore.h - - - chmempools.h - 5 - ..\..\..\..\os\kernel\include\chmempools.h - - - chmsg.h - 5 - ..\..\..\..\os\kernel\include\chmsg.h - - - chmtx.h - 5 - ..\..\..\..\os\kernel\include\chmtx.h - - - chqueues.h - 5 - ..\..\..\..\os\kernel\include\chqueues.h - - - chregistry.h - 5 - ..\..\..\..\os\kernel\include\chregistry.h - - - chschd.h - 5 - ..\..\..\..\os\kernel\include\chschd.h - - - chsem.h - 5 - ..\..\..\..\os\kernel\include\chsem.h - - - chstreams.h - 5 - ..\..\..\..\os\kernel\include\chstreams.h - - - chsys.h - 5 - ..\..\..\..\os\kernel\include\chsys.h - - - chthreads.h - 5 - ..\..\..\..\os\kernel\include\chthreads.h - - - chvt.h - 5 - ..\..\..\..\os\kernel\include\chvt.h - - - - - hal - - - hal.c - 1 - ..\..\..\..\os\hal\src\hal.c - - - pal.c - 1 - ..\..\..\..\os\hal\src\pal.c - - - serial.c - 1 - ..\..\..\..\os\hal\src\serial.c - - - hal.h - 5 - ..\..\..\..\os\hal\include\hal.h - - - pal.h - 5 - ..\..\..\..\os\hal\include\pal.h - - - serial.h - 5 - ..\..\..\..\os\hal\include\serial.h - - - gpt.h - 5 - ..\..\..\..\os\hal\include\gpt.h - - - gpt.c - 1 - ..\..\..\..\os\hal\src\gpt.c - - - - - platform - - - gpt_lld.h - 5 - ..\..\..\..\os\hal\platforms\STM32\gpt_lld.h - - - gpt_lld.c - 1 - ..\..\..\..\os\hal\platforms\STM32\gpt_lld.c - - - hal_lld.c - 1 - ..\..\..\..\os\hal\platforms\STM32F4xx\hal_lld.c - - - hal_lld.h - 5 - ..\..\..\..\os\hal\platforms\STM32F4xx\hal_lld.h - - - pal_lld.c - 1 - ..\..\..\..\os\hal\platforms\STM32\GPIOv2\pal_lld.c - - - pal_lld.h - 5 - ..\..\..\..\os\hal\platforms\STM32\GPIOv2\pal_lld.h - - - serial_lld.c - 1 - ..\..\..\..\os\hal\platforms\STM32\USARTv1\serial_lld.c - - - serial_lld.h - 5 - ..\..\..\..\os\hal\platforms\STM32\USARTv1\serial_lld.h - - - stm32_dma.c - 1 - ..\..\..\..\os\hal\platforms\STM32F4xx\stm32_dma.c - - - stm32_dma.h - 5 - ..\..\..\..\os\hal\platforms\STM32F4xx\stm32_dma.h - - - stm32_rcc.h - 5 - ..\..\..\..\os\hal\platforms\STM32F4xx\stm32_rcc.h - - - stm32l1xx.h - 5 - ..\..\..\..\os\hal\platforms\STM32F4xx\stm32l1xx.h - - - - - test - - - test.c - 1 - ..\..\..\..\test\test.c - - - testbmk.c - 1 - ..\..\..\..\test\testbmk.c - - - testdyn.c - 1 - ..\..\..\..\test\testdyn.c - - - testevt.c - 1 - ..\..\..\..\test\testevt.c - - - testheap.c - 1 - ..\..\..\..\test\testheap.c - - - testmbox.c - 1 - ..\..\..\..\test\testmbox.c - - - testmsg.c - 1 - ..\..\..\..\test\testmsg.c - - - testmtx.c - 1 - ..\..\..\..\test\testmtx.c - - - testpools.c - 1 - ..\..\..\..\test\testpools.c - - - testqueues.c - 1 - ..\..\..\..\test\testqueues.c - - - testsem.c - 1 - ..\..\..\..\test\testsem.c - - - testthd.c - 1 - ..\..\..\..\test\testthd.c - - - test.h - 5 - ..\..\..\..\test\test.h - - - testbmk.h - 5 - ..\..\..\..\test\testbmk.h - - - testdyn.h - 5 - ..\..\..\..\test\testdyn.h - - - testevt.h - 5 - ..\..\..\..\test\testevt.h - - - testheap.h - 5 - ..\..\..\..\test\testheap.h - - - testmbox.h - 5 - ..\..\..\..\test\testmbox.h - - - testmsg.h - 5 - ..\..\..\..\test\testmsg.h - - - testmtx.h - 5 - ..\..\..\..\test\testmtx.h - - - testpools.h - 5 - ..\..\..\..\test\testpools.h - - - testqueues.h - 5 - ..\..\..\..\test\testqueues.h - - - testsem.h - 5 - ..\..\..\..\test\testsem.h - - - testthd.h - 5 - ..\..\..\..\test\testthd.h - - - - - demo - - - main.c - 1 - ..\main.c - - - mcuconf.h - 5 - ..\mcuconf.h - - - chconf.h - 5 - ..\chconf.h - - - halconf.h - 5 - ..\halconf.h - - - extfunc.c - 1 - ..\extfunc.c - - - - - - - - diff --git a/testhal/STM32F4xx/IRQ_STORM_FPU/main.c b/testhal/STM32F4xx/IRQ_STORM_FPU/main.c deleted file mode 100644 index ad72cc0b9..000000000 --- a/testhal/STM32F4xx/IRQ_STORM_FPU/main.c +++ /dev/null @@ -1,300 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include - -#include "ch.h" -#include "hal.h" - -float ff1(float par); - -float ff2(float par1, float par2, float par3, float par4); - -/*===========================================================================*/ -/* Configurable settings. */ -/*===========================================================================*/ - -#ifndef RANDOMIZE -#define RANDOMIZE FALSE -#endif - -#ifndef ITERATIONS -#define ITERATIONS 100 -#endif - -/*===========================================================================*/ -/* Test related code. */ -/*===========================================================================*/ - -static bool_t saturated; - -/* - * Test worker thread. - */ -static WORKING_AREA(waWorkerThread, 128); -static msg_t WorkerThread(void *arg) { - - (void)arg; - - while(1) { - float f1, f2, f3, f4, f5; - - f1 = ff1(3.0f); - f2 = ff1(4.0f); - f3 = ff1(5.0f); - f5 = f1 + f2 + f3; - f4 = ff1(6.0f); - f5 = ff2(f5, f4, f5, f4); - if (f5 != 324.0f) - chSysHalt(); - } -} - -/* - * Test periodic thread. - */ -static WORKING_AREA(waPeriodicThread, 128); -static msg_t PeriodicThread(void *arg) { - - (void)arg; - - while(1) { - float f1, f2, f3, f4, f5; - - f1 = ff1(4.0f); - f2 = ff1(5.0f); - f3 = ff1(6.0f); - f5 = f1 + f2 + f3; - f4 = ff1(7.0f); - f5 = ff2(f5, f4, f5, f4); - if (f5 != 484.0f) - chSysHalt(); - chThdSleepSeconds(1); - } -} - -/* - * GPT2 callback. - */ -static void gpt2cb(GPTDriver *gptp) { - float f1, f2, f3, f4, f5; - - (void)gptp; - - f1 = ff1(2.0f); - f2 = ff1(3.0f); - f3 = ff1(4.0f); - f5 = f1 + f2 + f3; - f4 = ff1(5.0f); - f5 = ff2(f5, f4, f5, f4); - if (f5 != 196.0f) - chSysHalt(); -} - -/* - * GPT3 callback. - */ -static void gpt3cb(GPTDriver *gptp) { - float f1, f2, f3, f4, f5; - - (void)gptp; - - f1 = ff1(1.0f); - f2 = ff1(2.0f); - f3 = ff1(3.0f); - f5 = f1 + f2 + f3; - f4 = ff1(4.0f); - f5 = ff2(f5, f4, f5, f4); - if (f5 != 100.0f) - chSysHalt(); -} - -/* - * GPT2 configuration. - */ -static const GPTConfig gpt2cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt2cb /* Timer callback.*/ -}; - -/* - * GPT3 configuration. - */ -static const GPTConfig gpt3cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt3cb /* Timer callback.*/ -}; - - -/*===========================================================================*/ -/* Generic demo code. */ -/*===========================================================================*/ - -static void print(char *p) { - - while (*p) { - chSequentialStreamPut(&SD2, *p++); - } -} - -static void println(char *p) { - - while (*p) { - chSequentialStreamPut(&SD2, *p++); - } - chSequentialStreamWrite(&SD2, (uint8_t *)"\r\n", 2); -} - -static void printn(uint32_t n) { - char buf[16], *p; - - if (!n) - chSequentialStreamPut(&SD2, '0'); - else { - p = buf; - while (n) - *p++ = (n % 10) + '0', n /= 10; - while (p > buf) - chSequentialStreamPut(&SD2, *--p); - } -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - gptcnt_t interval, threshold, worst; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Prepares the Serial driver 2 and GPT drivers 2 and 3. - */ - sdStart(&SD2, NULL); /* Default is 38400-8-N-1.*/ - palSetPadMode(GPIOA, 2, PAL_MODE_ALTERNATE(7)); - palSetPadMode(GPIOA, 3, PAL_MODE_ALTERNATE(7)); - gptStart(&GPTD2, &gpt2cfg); - gptStart(&GPTD3, &gpt3cfg); - - /* - * Initializes the worker threads. - */ - chThdCreateStatic(waWorkerThread, sizeof waWorkerThread, - NORMALPRIO - 20, WorkerThread, NULL); - chThdCreateStatic(waPeriodicThread, sizeof waPeriodicThread, - NORMALPRIO - 10, PeriodicThread, NULL); - - /* - * Test procedure. - */ - println(""); - println("*** ChibiOS/RT IRQ-STORM-FPU long duration test"); - println("***"); - print("*** Kernel: "); - println(CH_KERNEL_VERSION); - print("*** Compiled: "); - println(__DATE__ " - " __TIME__); -#ifdef CH_COMPILER_NAME - print("*** Compiler: "); - println(CH_COMPILER_NAME); -#endif - print("*** Architecture: "); - println(CH_ARCHITECTURE_NAME); -#ifdef CH_CORE_VARIANT_NAME - print("*** Core Variant: "); - println(CH_CORE_VARIANT_NAME); -#endif -#ifdef CH_PORT_INFO - print("*** Port Info: "); - println(CH_PORT_INFO); -#endif -#ifdef PLATFORM_NAME - print("*** Platform: "); - println(PLATFORM_NAME); -#endif -#ifdef BOARD_NAME - print("*** Test Board: "); - println(BOARD_NAME); -#endif - println("***"); - print("*** System Clock: "); - printn(STM32_SYSCLK); - println(""); - print("*** Iterations: "); - printn(ITERATIONS); - println(""); - print("*** Randomize: "); - printn(RANDOMIZE); - println(""); - - println(""); - worst = 0; - for (i = 1; i <= ITERATIONS; i++){ - print("Iteration "); - printn(i); - println(""); - saturated = FALSE; - threshold = 0; - for (interval = 2000; interval >= 10; interval -= interval / 10) { - gptStartContinuous(&GPTD2, interval - 1); /* Slightly out of phase.*/ - gptStartContinuous(&GPTD3, interval + 1); /* Slightly out of phase.*/ - chThdSleepMilliseconds(1000); - gptStopTimer(&GPTD2); - gptStopTimer(&GPTD3); - if (!saturated) - print("."); - else { - print("#"); - if (threshold == 0) - threshold = interval; - } - } - /* Gives the worker threads a chance to empty the mailboxes before next - cycle.*/ - chThdSleepMilliseconds(20); - println(""); - print("Saturated at "); - printn(threshold); - println(" uS"); - println(""); - if (threshold > worst) - worst = threshold; - } - gptStopTimer(&GPTD2); - gptStopTimer(&GPTD3); - - print("Worst case at "); - printn(worst); - println(" uS"); - println(""); - println("Test Complete"); - - /* - * Normal main() thread activity, nothing in this test. - */ - while (TRUE) { - chThdSleepMilliseconds(5000); - } -} diff --git a/testhal/STM32F4xx/IRQ_STORM_FPU/mcuconf.h b/testhal/STM32F4xx/IRQ_STORM_FPU/mcuconf.h deleted file mode 100644 index dc10c0604..000000000 --- a/testhal/STM32F4xx/IRQ_STORM_FPU/mcuconf.h +++ /dev/null @@ -1,278 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_VOS STM32_VOS_HIGH -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 TRUE -#define STM32_GPT_USE_TIM3 TRUE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 6 -#define STM32_GPT_TIM3_IRQ_PRIORITY 10 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C3_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32F4xx/IRQ_STORM_FPU/readme.txt b/testhal/STM32F4xx/IRQ_STORM_FPU/readme.txt deleted file mode 100644 index cb043261f..000000000 --- a/testhal/STM32F4xx/IRQ_STORM_FPU/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - IRQ_STORM_FPU stress test demo for STM32F4xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F4-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F4xx GPT, PAL and Serial -drivers in order to implement a system stress demo involving the FPU. - -** Board Setup ** - -None. - -** Build Procedure ** - -The demo has been tested using YAGARTO 4.6.2. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F4xx/PWM-ICU/.cproject b/testhal/STM32F4xx/PWM-ICU/.cproject deleted file mode 100644 index 940a1c9d5..000000000 --- a/testhal/STM32F4xx/PWM-ICU/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F4xx/PWM-ICU/.project b/testhal/STM32F4xx/PWM-ICU/.project deleted file mode 100644 index ebfbb62af..000000000 --- a/testhal/STM32F4xx/PWM-ICU/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F4xx-PWM-ICU - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32F4_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F4xx/PWM-ICU/Makefile b/testhal/STM32F4xx/PWM-ICU/Makefile deleted file mode 100644 index 86de6d81c..000000000 --- a/testhal/STM32F4xx/PWM-ICU/Makefile +++ /dev/null @@ -1,222 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32F4_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F4xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F407xG.ld -#LDSCRIPT= $(PORTLD)/STM32F407xG_CCM.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/chprintf.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F4xx/PWM-ICU/chconf.h b/testhal/STM32F4xx/PWM-ICU/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F4xx/PWM-ICU/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/PWM-ICU/halconf.h b/testhal/STM32F4xx/PWM-ICU/halconf.h deleted file mode 100644 index 2f74c82c8..000000000 --- a/testhal/STM32F4xx/PWM-ICU/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU TRUE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/PWM-ICU/main.c b/testhal/STM32F4xx/PWM-ICU/main.c deleted file mode 100644 index dc6287209..000000000 --- a/testhal/STM32F4xx/PWM-ICU/main.c +++ /dev/null @@ -1,138 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void pwmpcb(PWMDriver *pwmp) { - - (void)pwmp; - palClearPad(GPIOD, GPIOD_LED5); -} - -static void pwmc1cb(PWMDriver *pwmp) { - - (void)pwmp; - palSetPad(GPIOD, GPIOD_LED5); -} - -static PWMConfig pwmcfg = { - 10000, /* 10kHz PWM clock frequency. */ - 10000, /* Initial PWM period 1S. */ - pwmpcb, - { - {PWM_OUTPUT_ACTIVE_HIGH, pwmc1cb}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL} - }, - 0, -}; - -icucnt_t last_width, last_period; - -static void icuwidthcb(ICUDriver *icup) { - - palSetPad(GPIOD, GPIOD_LED4); - last_width = icuGetWidth(icup); -} - -static void icuperiodcb(ICUDriver *icup) { - - palClearPad(GPIOD, GPIOD_LED4); - last_period = icuGetPeriod(icup); -} - -static ICUConfig icucfg = { - ICU_INPUT_ACTIVE_HIGH, - 10000, /* 10kHz ICU clock frequency. */ - icuwidthcb, - icuperiodcb, - NULL, - ICU_CHANNEL_1 -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes the PWM driver 2 and ICU driver 3. - * GPIOA15 is the PWM output. - * GPIOC6 is the ICU input. - * The two pins have to be externally connected together. - */ - pwmStart(&PWMD2, &pwmcfg); - palSetPadMode(GPIOA, 15, PAL_MODE_ALTERNATE(1)); - icuStart(&ICUD3, &icucfg); - palSetPadMode(GPIOC, 6, PAL_MODE_ALTERNATE(2)); - icuEnable(&ICUD3); - chThdSleepMilliseconds(2000); - - /* - * Starts the PWM channel 0 using 75% duty cycle. - */ - pwmEnableChannel(&PWMD2, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD2, 7500)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 50% duty cycle. - */ - pwmEnableChannel(&PWMD2, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD2, 5000)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 25% duty cycle. - */ - pwmEnableChannel(&PWMD2, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD2, 2500)); - chThdSleepMilliseconds(5000); - - /* - * Changes PWM period to half second the duty cycle becomes 50% - * implicitly. - */ - pwmChangePeriod(&PWMD2, 5000); - chThdSleepMilliseconds(5000); - - /* - * Disables channel 0 and stops the drivers. - */ - pwmDisableChannel(&PWMD2, 0); - pwmStop(&PWMD2); - icuDisable(&ICUD3); - icuStop(&ICUD3); - palClearPad(GPIOD, GPIOD_LED4); - palClearPad(GPIOD, GPIOD_LED5); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F4xx/PWM-ICU/mcuconf.h b/testhal/STM32F4xx/PWM-ICU/mcuconf.h deleted file mode 100644 index e1e2badda..000000000 --- a/testhal/STM32F4xx/PWM-ICU/mcuconf.h +++ /dev/null @@ -1,278 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_VOS STM32_VOS_HIGH -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C3_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 TRUE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 TRUE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32F4xx/PWM-ICU/readme.txt b/testhal/STM32F4xx/PWM-ICU/readme.txt deleted file mode 100644 index bd908948f..000000000 --- a/testhal/STM32F4xx/PWM-ICU/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - PWM-ICU drivers demo for STM32F4xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F4-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F4xx PWM-ICU drivers. - -** Board Setup ** - -- Connect PA15 and PC6 together. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F4xx/RTC/.cproject b/testhal/STM32F4xx/RTC/.cproject deleted file mode 100644 index 685ffe5f1..000000000 --- a/testhal/STM32F4xx/RTC/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F4xx/RTC/.project b/testhal/STM32F4xx/RTC/.project deleted file mode 100644 index b281eb7d2..000000000 --- a/testhal/STM32F4xx/RTC/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F4xx-RTC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32F4_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F4xx/RTC/Makefile b/testhal/STM32F4xx/RTC/Makefile deleted file mode 100644 index e383fef85..000000000 --- a/testhal/STM32F4xx/RTC/Makefile +++ /dev/null @@ -1,226 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/NONSTANDARD_STM32F4_BARTHESS1/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F4xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F407xG.ld -#LDSCRIPT= $(PORTLD)/STM32F407xG_CCM.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - $(CHIBIOS)/os/various/syscalls.c \ - $(CHIBIOS)/os/various/shell.c \ - $(CHIBIOS)/os/various/chprintf.c \ - $(CHIBIOS)/os/various/chrtclib.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F4xx/RTC/chconf.h b/testhal/STM32F4xx/RTC/chconf.h deleted file mode 100644 index 0a00640e2..000000000 --- a/testhal/STM32F4xx/RTC/chconf.h +++ /dev/null @@ -1,508 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define PORT_IDLE_THREAD_STACK_SIZE 32 -#define CORTEX_USE_FPU FALSE - -/*===========================================================================*/ -/* Kernel parameters. */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 0//20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/*===========================================================================*/ -/* Performance options. */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED FALSE -#endif - -/*===========================================================================*/ -/* Subsystem options. */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS FALSE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT FALSE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP FALSE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC FALSE -#endif - -/*===========================================================================*/ -/* Debug options. */ -/*===========================================================================*/ -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/*===========================================================================*/ -/* Kernel hooks. */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/RTC/halconf.h b/testhal/STM32F4xx/RTC/halconf.h deleted file mode 100644 index f0040635d..000000000 --- a/testhal/STM32F4xx/RTC/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC TRUE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/RTC/main.c b/testhal/STM32F4xx/RTC/main.c deleted file mode 100644 index 6b25d371a..000000000 --- a/testhal/STM32F4xx/RTC/main.c +++ /dev/null @@ -1,239 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* -This structure is used to hold the values representing a calendar time. -It contains the following members, with the meanings as shown. - -int tm_sec seconds after minute [0-61] (61 allows for 2 leap-seconds) -int tm_min minutes after hour [0-59] -int tm_hour hours after midnight [0-23] -int tm_mday day of the month [1-31] -int tm_mon month of year [0-11] -int tm_year current year-1900 -int tm_wday days since Sunday [0-6] -int tm_yday days since January 1st [0-365] -int tm_isdst daylight savings indicator (1 = yes, 0 = no, -1 = unknown) -*/ -#define WAKEUP_TEST FALSE - -#include -#include -#include - -#include "ch.h" -#include "hal.h" - -#include "shell.h" -#include "chprintf.h" -#include "chrtclib.h" - -#if WAKEUP_TEST -static RTCWakeup wakeupspec; -#endif -static RTCAlarm alarmspec; -static time_t unix_time; - -/* libc stub */ -int _getpid(void) {return 1;} -/* libc stub */ -void _exit(int i) {(void)i;} -/* libc stub */ -#include -#undef errno -extern int errno; -int _kill(int pid, int sig) { - (void)pid; - (void)sig; - errno = EINVAL; - return -1; -} - - -/* sleep indicator thread */ -static WORKING_AREA(blinkWA, 128); -static msg_t blink_thd(void *arg){ - (void)arg; - while (TRUE) { - chThdSleepMilliseconds(100); - palTogglePad(GPIOB, GPIOB_LED_R); - } - return 0; -} - -static void func_sleep(void){ - chSysLock(); - SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk; - PWR->CR |= (PWR_CR_PDDS | PWR_CR_LPDS | PWR_CR_CSBF | PWR_CR_CWUF); - RTC->ISR &= ~(RTC_ISR_ALRBF | RTC_ISR_ALRAF | RTC_ISR_WUTF | RTC_ISR_TAMP1F | - RTC_ISR_TSOVF | RTC_ISR_TSF); - __WFI(); -} - -static void cmd_sleep(BaseSequentialStream *chp, int argc, char *argv[]){ - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: sleep\r\n"); - return; - } - chprintf(chp, "Going to sleep.\r\n"); - - chThdSleepMilliseconds(200); - - /* going to anabiosis */ - func_sleep(); -} - -/* - * - */ -static void cmd_alarm(BaseSequentialStream *chp, int argc, char *argv[]){ - int i = 0; - - (void)argv; - if (argc < 1) { - goto ERROR; - } - - if ((argc == 1) && (strcmp(argv[0], "get") == 0)){ - rtcGetAlarm(&RTCD1, 0, &alarmspec); - chprintf(chp, "%D%s",alarmspec," - alarm in STM internal format\r\n"); - return; - } - - if ((argc == 2) && (strcmp(argv[0], "set") == 0)){ - i = atol(argv[1]); - alarmspec.tv_datetime = ((i / 10) & 7 << 4) | (i % 10) | RTC_ALRMAR_MSK4 | - RTC_ALRMAR_MSK3 | RTC_ALRMAR_MSK2; - rtcSetAlarm(&RTCD1, 0, &alarmspec); - return; - } - else{ - goto ERROR; - } - -ERROR: - chprintf(chp, "Usage: alarm get\r\n"); - chprintf(chp, " alarm set N\r\n"); - chprintf(chp, "where N is alarm time in seconds\r\n"); -} - -/* - * - */ -static void cmd_date(BaseSequentialStream *chp, int argc, char *argv[]){ - (void)argv; - struct tm timp; - - if (argc == 0) { - goto ERROR; - } - - if ((argc == 1) && (strcmp(argv[0], "get") == 0)){ - unix_time = rtcGetTimeUnixSec(&RTCD1); - - if (unix_time == -1){ - chprintf(chp, "incorrect time in RTC cell\r\n"); - } - else{ - chprintf(chp, "%D%s",unix_time," - unix time\r\n"); - rtcGetTimeTm(&RTCD1, &timp); - chprintf(chp, "%s%s",asctime(&timp)," - formatted time string\r\n"); - } - return; - } - - if ((argc == 2) && (strcmp(argv[0], "set") == 0)){ - unix_time = atol(argv[1]); - if (unix_time > 0){ - rtcSetTimeUnixSec(&RTCD1, unix_time); - return; - } - else{ - goto ERROR; - } - } - else{ - goto ERROR; - } - -ERROR: - chprintf(chp, "Usage: date get\r\n"); - chprintf(chp, " date set N\r\n"); - chprintf(chp, "where N is time in seconds sins Unix epoch\r\n"); - chprintf(chp, "you can get current N value from unix console by the command\r\n"); - chprintf(chp, "%s", "date +\%s\r\n"); - return; -} - -static SerialConfig ser_cfg = { - 115200, - 0, - 0, - 0, -}; - -static const ShellCommand commands[] = { - {"alarm", cmd_alarm}, - {"date", cmd_date}, - {"sleep", cmd_sleep}, - {NULL, NULL} -}; - -static const ShellConfig shell_cfg1 = { - (BaseSequentialStream *)&SD2, - commands -}; - - -/** - * Main function. - */ -int main(void){ - - halInit(); - chSysInit(); - chThdCreateStatic(blinkWA, sizeof(blinkWA), NORMALPRIO, blink_thd, NULL); - -#if !WAKEUP_TEST - /* switch off wakeup */ - rtcSetPeriodicWakeup_v2(&RTCD1, NULL); - - /* Shell initialization.*/ - sdStart(&SD2, &ser_cfg); - shellInit(); - static WORKING_AREA(waShell, 1024); - shellCreateStatic(&shell_cfg1, waShell, sizeof(waShell), NORMALPRIO); - - /* wait until user do not want to test wakeup */ - while (TRUE){ - chThdSleepMilliseconds(200); - } - -#else - /* set wakeup */ - wakeupspec.wakeup = ((uint32_t)4) << 16; /* select 1 Hz clock source */ - wakeupspec.wakeup |= 9; /* set counter value to 9. Period will be 9+1 seconds. */ - rtcSetPeriodicWakeup_v2(&RTCD1, &wakeupspec); - - chThdSleepSeconds(3); - func_sleep(); -#endif /* !WAKEUP_TEST */ - - return 0; -} - - diff --git a/testhal/STM32F4xx/RTC/mcuconf.h b/testhal/STM32F4xx/RTC/mcuconf.h deleted file mode 100644 index 5feae3259..000000000 --- a/testhal/STM32F4xx/RTC/mcuconf.h +++ /dev/null @@ -1,278 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED TRUE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSE -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_VOS STM32_VOS_HIGH -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C3_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32F4xx/RTC_FATTIME/Makefile b/testhal/STM32F4xx/RTC_FATTIME/Makefile deleted file mode 100644 index ffd36e3d2..000000000 --- a/testhal/STM32F4xx/RTC_FATTIME/Makefile +++ /dev/null @@ -1,217 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 #-mhard-float -mfpu=fpv4-sp-d16 -fsingle-precision-constant -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Define linker script file here -LDSCRIPT= ch.ld - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/NONSTANDARD_STM32F4_BARTHESS1/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F4xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -include $(CHIBIOS)/os/various/fatfs_bindings/fatfs.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F407xG.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(FATFSSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - $(CHIBIOS)/os/various/syscalls.c \ - $(CHIBIOS)/os/various/shell.c \ - $(CHIBIOS)/os/various/chprintf.c \ - $(CHIBIOS)/os/various/chrtclib.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various $(FATFSINC) - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F4xx/RTC_FATTIME/chconf.h b/testhal/STM32F4xx/RTC_FATTIME/chconf.h deleted file mode 100644 index 868377751..000000000 --- a/testhal/STM32F4xx/RTC_FATTIME/chconf.h +++ /dev/null @@ -1,534 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define PORT_IDLE_THREAD_STACK_SIZE 32 -#define CORTEX_USE_FPU FALSE - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/RTC_FATTIME/ffconf.h b/testhal/STM32F4xx/RTC_FATTIME/ffconf.h deleted file mode 100644 index a4816e845..000000000 --- a/testhal/STM32F4xx/RTC_FATTIME/ffconf.h +++ /dev/null @@ -1,193 +0,0 @@ -/* CHIBIOS FIX */ -#include "ch.h" - -/*---------------------------------------------------------------------------/ -/ FatFs - FAT file system module configuration file R0.09 (C)ChaN, 2011 -/----------------------------------------------------------------------------/ -/ -/ CAUTION! Do not forget to make clean the project after any changes to -/ the configuration options. -/ -/----------------------------------------------------------------------------*/ -#ifndef _FFCONF -#define _FFCONF 6502 /* Revision ID */ - - -/*---------------------------------------------------------------------------/ -/ Functions and Buffer Configurations -/----------------------------------------------------------------------------*/ - -#define _FS_TINY 0 /* 0:Normal or 1:Tiny */ -/* When _FS_TINY is set to 1, FatFs uses the sector buffer in the file system -/ object instead of the sector buffer in the individual file object for file -/ data transfer. This reduces memory consumption 512 bytes each file object. */ - - -#define _FS_READONLY 0 /* 0:Read/Write or 1:Read only */ -/* Setting _FS_READONLY to 1 defines read only configuration. This removes -/ writing functions, f_write, f_sync, f_unlink, f_mkdir, f_chmod, f_rename, -/ f_truncate and useless f_getfree. */ - - -#define _FS_MINIMIZE 0 /* 0 to 3 */ -/* The _FS_MINIMIZE option defines minimization level to remove some functions. -/ -/ 0: Full function. -/ 1: f_stat, f_getfree, f_unlink, f_mkdir, f_chmod, f_truncate and f_rename -/ are removed. -/ 2: f_opendir and f_readdir are removed in addition to 1. -/ 3: f_lseek is removed in addition to 2. */ - - -#define _USE_STRFUNC 0 /* 0:Disable or 1-2:Enable */ -/* To enable string functions, set _USE_STRFUNC to 1 or 2. */ - - -#define _USE_MKFS 1 /* 0:Disable or 1:Enable */ -/* To enable f_mkfs function, set _USE_MKFS to 1 and set _FS_READONLY to 0 */ - - -#define _USE_FORWARD 0 /* 0:Disable or 1:Enable */ -/* To enable f_forward function, set _USE_FORWARD to 1 and set _FS_TINY to 1. */ - - -#define _USE_FASTSEEK 0 /* 0:Disable or 1:Enable */ -/* To enable fast seek feature, set _USE_FASTSEEK to 1. */ - - - -/*---------------------------------------------------------------------------/ -/ Locale and Namespace Configurations -/----------------------------------------------------------------------------*/ - -#define _CODE_PAGE 1251 -/* The _CODE_PAGE specifies the OEM code page to be used on the target system. -/ Incorrect setting of the code page can cause a file open failure. -/ -/ 932 - Japanese Shift-JIS (DBCS, OEM, Windows) -/ 936 - Simplified Chinese GBK (DBCS, OEM, Windows) -/ 949 - Korean (DBCS, OEM, Windows) -/ 950 - Traditional Chinese Big5 (DBCS, OEM, Windows) -/ 1250 - Central Europe (Windows) -/ 1251 - Cyrillic (Windows) -/ 1252 - Latin 1 (Windows) -/ 1253 - Greek (Windows) -/ 1254 - Turkish (Windows) -/ 1255 - Hebrew (Windows) -/ 1256 - Arabic (Windows) -/ 1257 - Baltic (Windows) -/ 1258 - Vietnam (OEM, Windows) -/ 437 - U.S. (OEM) -/ 720 - Arabic (OEM) -/ 737 - Greek (OEM) -/ 775 - Baltic (OEM) -/ 850 - Multilingual Latin 1 (OEM) -/ 858 - Multilingual Latin 1 + Euro (OEM) -/ 852 - Latin 2 (OEM) -/ 855 - Cyrillic (OEM) -/ 866 - Russian (OEM) -/ 857 - Turkish (OEM) -/ 862 - Hebrew (OEM) -/ 874 - Thai (OEM, Windows) -/ 1 - ASCII only (Valid for non LFN cfg.) -*/ - - -#define _USE_LFN 1 /* 0 to 3 */ -#define _MAX_LFN 255 /* Maximum LFN length to handle (12 to 255) */ -/* The _USE_LFN option switches the LFN support. -/ -/ 0: Disable LFN feature. _MAX_LFN and _LFN_UNICODE have no effect. -/ 1: Enable LFN with static working buffer on the BSS. Always NOT reentrant. -/ 2: Enable LFN with dynamic working buffer on the STACK. -/ 3: Enable LFN with dynamic working buffer on the HEAP. -/ -/ The LFN working buffer occupies (_MAX_LFN + 1) * 2 bytes. To enable LFN, -/ Unicode handling functions ff_convert() and ff_wtoupper() must be added -/ to the project. When enable to use heap, memory control functions -/ ff_memalloc() and ff_memfree() must be added to the project. */ - - -#define _LFN_UNICODE 0 /* 0:ANSI/OEM or 1:Unicode */ -/* To switch the character code set on FatFs API to Unicode, -/ enable LFN feature and set _LFN_UNICODE to 1. */ - - -#define _FS_RPATH 0 /* 0 to 2 */ -/* The _FS_RPATH option configures relative path feature. -/ -/ 0: Disable relative path feature and remove related functions. -/ 1: Enable relative path. f_chdrive() and f_chdir() are available. -/ 2: f_getcwd() is available in addition to 1. -/ -/ Note that output of the f_readdir fnction is affected by this option. */ - - - -/*---------------------------------------------------------------------------/ -/ Physical Drive Configurations -/----------------------------------------------------------------------------*/ - -#define _VOLUMES 1 -/* Number of volumes (logical drives) to be used. */ - - -#define _MAX_SS 512 /* 512, 1024, 2048 or 4096 */ -/* Maximum sector size to be handled. -/ Always set 512 for memory card and hard disk but a larger value may be -/ required for on-board flash memory, floppy disk and optical disk. -/ When _MAX_SS is larger than 512, it configures FatFs to variable sector size -/ and GET_SECTOR_SIZE command must be implememted to the disk_ioctl function. */ - - -#define _MULTI_PARTITION 0 /* 0:Single partition, 1/2:Enable multiple partition */ -/* When set to 0, each volume is bound to the same physical drive number and -/ it can mount only first primaly partition. When it is set to 1, each volume -/ is tied to the partitions listed in VolToPart[]. */ - - -#define _USE_ERASE 1 /* 0:Disable or 1:Enable */ -/* To enable sector erase feature, set _USE_ERASE to 1. CTRL_ERASE_SECTOR command -/ should be added to the disk_ioctl functio. */ - - - -/*---------------------------------------------------------------------------/ -/ System Configurations -/----------------------------------------------------------------------------*/ - -#define _WORD_ACCESS 1 /* 0 or 1 */ -/* Set 0 first and it is always compatible with all platforms. The _WORD_ACCESS -/ option defines which access method is used to the word data on the FAT volume. -/ -/ 0: Byte-by-byte access. -/ 1: Word access. Do not choose this unless following condition is met. -/ -/ When the byte order on the memory is big-endian or address miss-aligned word -/ access results incorrect behavior, the _WORD_ACCESS must be set to 0. -/ If it is not the case, the value can also be set to 1 to improve the -/ performance and code size. -*/ - - -/* A header file that defines sync object types on the O/S, such as -/ windows.h, ucos_ii.h and semphr.h, must be included prior to ff.h. */ - -#define _FS_REENTRANT 0 /* 0:Disable or 1:Enable */ -#define _FS_TIMEOUT 1000 /* Timeout period in unit of time ticks */ -#define _SYNC_t Semaphore * /* O/S dependent type of sync object. e.g. HANDLE, OS_EVENT*, ID and etc.. */ - -/* The _FS_REENTRANT option switches the reentrancy (thread safe) of the FatFs module. -/ -/ 0: Disable reentrancy. _SYNC_t and _FS_TIMEOUT have no effect. -/ 1: Enable reentrancy. Also user provided synchronization handlers, -/ ff_req_grant, ff_rel_grant, ff_del_syncobj and ff_cre_syncobj -/ function must be added to the project. */ - - -#define _FS_SHARE 0 /* 0:Disable or >=1:Enable */ -/* To enable file shareing feature, set _FS_SHARE to 1 or greater. The value - defines how many files can be opened simultaneously. */ - - -#endif /* _FFCONFIG */ diff --git a/testhal/STM32F4xx/RTC_FATTIME/halconf.h b/testhal/STM32F4xx/RTC_FATTIME/halconf.h deleted file mode 100644 index f33c18c27..000000000 --- a/testhal/STM32F4xx/RTC_FATTIME/halconf.h +++ /dev/null @@ -1,319 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC TRUE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC TRUE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief Write timeout in milliseconds. - */ -#if !defined(SDC_WRITE_TIMEOUT_MS) || defined(__DOXYGEN__) -#define SDC_WRITE_TIMEOUT_MS 250 -#endif - -/** - * @brief Write timeout in milliseconds. - */ -#if !defined(SDC_READ_TIMEOUT_MS) || defined(__DOXYGEN__) -#define SDC_READ_TIMEOUT_MS 5 -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/RTC_FATTIME/main.c b/testhal/STM32F4xx/RTC_FATTIME/main.c deleted file mode 100644 index 3c031ade0..000000000 --- a/testhal/STM32F4xx/RTC_FATTIME/main.c +++ /dev/null @@ -1,218 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include -#include - -#include "ch.h" -#include "hal.h" - -#include "shell.h" -#include "chprintf.h" -#include "chrtclib.h" - -#include "ff.h" - -/* FS object.*/ -static FATFS SDC_FS; - -/* FS mounted and ready.*/ -static bool_t fs_ready = FALSE; - -/** - * - */ -bool_t sdc_lld_is_write_protected(SDCDriver *sdcp) { - (void)sdcp; - return FALSE; -} - -/** - * - */ -bool_t sdc_lld_is_card_inserted(SDCDriver *sdcp) { - (void)sdcp; - return !palReadPad(GPIOE, GPIOE_SDIO_DETECT); -} - -/** - * - */ -void cmd_sdiotest(BaseSequentialStream *chp, int argc, char *argv[]){ - (void)argc; - (void)argv; - FRESULT err; - uint32_t clusters; - FATFS *fsp; - FIL FileObject; - //FILINFO FileInfo; - size_t bytes_written; - struct tm timp; - -#if !HAL_USE_RTC - chprintf(chp, "ERROR! Chibios compiled without RTC support."); - chprintf(chp, "Enable HAL_USE_RCT in you halconf.h"); - chThdSleepMilliseconds(100); - return; -#endif - - chprintf(chp, "Trying to connect SDIO... "); - chThdSleepMilliseconds(100); - - if (!sdcConnect(&SDCD1)) { - chprintf(chp, "OK\r\n"); - chprintf(chp, "Register working area for filesystem... "); - chThdSleepMilliseconds(100); - err = f_mount(0, &SDC_FS); - if (err != FR_OK){ - chSysHalt(); - } - else{ - fs_ready = TRUE; - chprintf(chp, "OK\r\n"); - } - - chprintf(chp, "Mounting filesystem... "); - chThdSleepMilliseconds(100); - err = f_getfree("/", &clusters, &fsp); - if (err != FR_OK) { - chSysHalt(); - } - chprintf(chp, "OK\r\n"); - chprintf(chp, - "FS: %lu free clusters, %lu sectors per cluster, %lu bytes free\r\n", - clusters, (uint32_t)SDC_FS.csize, - clusters * (uint32_t)SDC_FS.csize * (uint32_t)MMCSD_BLOCK_SIZE); - - rtcGetTimeTm(&RTCD1, &timp); - chprintf(chp, "Current RTC time is: "); - chprintf(chp, "%u-%u-%u %u:%u:%u\r\n", - timp.tm_year+1900, timp.tm_mon+1, timp.tm_mday, timp.tm_hour, timp.tm_min, - timp.tm_sec); - - chprintf(chp, "Creating empty file 'tmstmp.tst'... "); - chThdSleepMilliseconds(100); - err = f_open(&FileObject, "0:tmstmp.tst", FA_WRITE | FA_OPEN_ALWAYS); - if (err != FR_OK) { - chSysHalt(); - } - chprintf(chp, "OK\r\n"); - - chprintf(chp, "Write some data in it... "); - chThdSleepMilliseconds(100); - err = f_write(&FileObject, "tst", sizeof("tst"), (void *)&bytes_written); - if (err != FR_OK) { - chSysHalt(); - } - else - chprintf(chp, "OK\r\n"); - - chprintf(chp, "Closing file 'tmstmp.tst'... "); - chThdSleepMilliseconds(100); - err = f_close(&FileObject); - if (err != FR_OK) { - chSysHalt(); - } - else - chprintf(chp, "OK\r\n"); - -// chprintf(chp, "Obtaining file info ... "); -// chThdSleepMilliseconds(100); -// err = f_stat("0:tmstmp.tst", &FileInfo); -// if (err != FR_OK) { -// chSysHalt(); -// } -// else{ -// chprintf(chp, "OK\r\n"); -// chprintf(chp, " Timestamp: %u-%u-%u %u:%u:%u\r\n", -// ((FileInfo.fdate >> 9) & 127) + 1980, -// (FileInfo.fdate >> 5) & 15, -// FileInfo.fdate & 31, -// (FileInfo.ftime >> 11) & 31, -// (FileInfo.ftime >> 5) & 63, -// (FileInfo.ftime & 31) * 2); -// } - - chprintf(chp, "Umounting filesystem... "); - f_mount(0, NULL); - chprintf(chp, "OK\r\n"); - - chprintf(chp, "Disconnecting from SDIO..."); - chThdSleepMilliseconds(100); - if (sdcDisconnect(&SDCD1)) - chSysHalt(); - chprintf(chp, " OK\r\n"); - chprintf(chp, "------------------------------------------------------\r\n"); - chprintf(chp, "Now you can remove memory card and check timestamp on PC.\r\n"); - chThdSleepMilliseconds(100); - } - else{ - chSysHalt(); - } -} - -/* - * SDIO configuration. - */ -static const SDCConfig sdccfg = { - 0 -}; - -/** - * - */ -static SerialConfig ser_cfg = { - 115200, - 0, - 0, - 0, -}; -static const ShellCommand commands[] = { - {"sdiotest", cmd_sdiotest}, - {NULL, NULL} -}; -static const ShellConfig shell_cfg1 = { - (BaseSequentialStream *)&SD2, - commands -}; - -/* - * Application entry point. - */ -int main(void) { - halInit(); - chSysInit(); - - /* start debugging serial link */ - sdStart(&SD2, &ser_cfg); - shellInit(); - static WORKING_AREA(waShell, 4096); - shellCreateStatic(&shell_cfg1, waShell, sizeof(waShell), NORMALPRIO); - - /* - * Initializes the SDIO drivers. - */ - sdcStart(&SDCD1, &sdccfg); - - /* - * Normal main() thread activity. - * Blinking signaling about successful passing. - */ - while (TRUE) { - palTogglePad(GPIOB, GPIOB_LED_R); - chThdSleepMilliseconds(100); - } -} diff --git a/testhal/STM32F4xx/RTC_FATTIME/mcuconf.h b/testhal/STM32F4xx/RTC_FATTIME/mcuconf.h deleted file mode 100644 index a8d51babe..000000000 --- a/testhal/STM32F4xx/RTC_FATTIME/mcuconf.h +++ /dev/null @@ -1,278 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_VOS STM32_VOS_HIGH -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C3_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32F4xx/RTC_FATTIME/readme.txt b/testhal/STM32F4xx/RTC_FATTIME/readme.txt deleted file mode 100644 index b5036cd2c..000000000 --- a/testhal/STM32F4xx/RTC_FATTIME/readme.txt +++ /dev/null @@ -1,27 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - SDC driver demo for STM32. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Olimex ST_STM3210E_EVAL board. - -** The Demo ** - -The application demonstrates the use of the STM32 RTC driver for timestamping -files on FAT. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F4xx/SDC/.cproject b/testhal/STM32F4xx/SDC/.cproject deleted file mode 100644 index 5315ed60f..000000000 --- a/testhal/STM32F4xx/SDC/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F4xx/SDC/.project b/testhal/STM32F4xx/SDC/.project deleted file mode 100644 index 630877d95..000000000 --- a/testhal/STM32F4xx/SDC/.project +++ /dev/null @@ -1,43 +0,0 @@ - - - STM32F4xx-SDC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32F4_DISCOVERY - - - fatfs - 2 - CHIBIOS/ext/fatfs - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F4xx/SDC/Makefile b/testhal/STM32F4xx/SDC/Makefile deleted file mode 100644 index b22e616e5..000000000 --- a/testhal/STM32F4xx/SDC/Makefile +++ /dev/null @@ -1,230 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Define linker script file here -LDSCRIPT= ch.ld - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/NONSTANDARD_STM32F4_BARTHESS1/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F4xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -include $(CHIBIOS)/os/various/fatfs_bindings/fatfs.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F407xG.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(FATFSSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - $(CHIBIOS)/os/various/syscalls.c \ - $(CHIBIOS)/os/various/shell.c \ - $(CHIBIOS)/os/various/chprintf.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various $(FATFSINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F4xx/SDC/chconf.h b/testhal/STM32F4xx/SDC/chconf.h deleted file mode 100644 index 868377751..000000000 --- a/testhal/STM32F4xx/SDC/chconf.h +++ /dev/null @@ -1,534 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define PORT_IDLE_THREAD_STACK_SIZE 32 -#define CORTEX_USE_FPU FALSE - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/SDC/csd.txt b/testhal/STM32F4xx/SDC/csd.txt deleted file mode 100644 index eefe5274c..000000000 --- a/testhal/STM32F4xx/SDC/csd.txt +++ /dev/null @@ -1,7 +0,0 @@ -127 ... ... 0 - -00000000 00101110 00000000 00110010 - 01011011 01011010 10100011 10100000 - 11111111111111111111111110000000 - 00001010100000000000000010001110 kingmax 2 GB -00000000 00101110 00000000 00110010 - 01011011 01011010 10000011 10101001 - 11111111111111111111111110000000 - 00010110100000000000000010010000 kingstone 2 GB -01000000 00001110 00000000 00110010 - 01011011 01011001 00000000 00000000 - 00111011010010110111111110000000 - 00001010010000000100000001000000 samsung sdhc 8 GB -00000000 00100110 00000000 00110010 - 01011111 01011010 10000011 10101110 - 11111110111110111100111111111111 - 10010010100000000100000011011110 noname 2 GB - diff --git a/testhal/STM32F4xx/SDC/ffconf.h b/testhal/STM32F4xx/SDC/ffconf.h deleted file mode 100644 index 9073f2286..000000000 --- a/testhal/STM32F4xx/SDC/ffconf.h +++ /dev/null @@ -1,193 +0,0 @@ -/* CHIBIOS FIX */ -#include "ch.h" - -/*---------------------------------------------------------------------------/ -/ FatFs - FAT file system module configuration file R0.09 (C)ChaN, 2011 -/----------------------------------------------------------------------------/ -/ -/ CAUTION! Do not forget to make clean the project after any changes to -/ the configuration options. -/ -/----------------------------------------------------------------------------*/ -#ifndef _FFCONF -#define _FFCONF 6502 /* Revision ID */ - - -/*---------------------------------------------------------------------------/ -/ Functions and Buffer Configurations -/----------------------------------------------------------------------------*/ - -#define _FS_TINY 0 /* 0:Normal or 1:Tiny */ -/* When _FS_TINY is set to 1, FatFs uses the sector buffer in the file system -/ object instead of the sector buffer in the individual file object for file -/ data transfer. This reduces memory consumption 512 bytes each file object. */ - - -#define _FS_READONLY 0 /* 0:Read/Write or 1:Read only */ -/* Setting _FS_READONLY to 1 defines read only configuration. This removes -/ writing functions, f_write, f_sync, f_unlink, f_mkdir, f_chmod, f_rename, -/ f_truncate and useless f_getfree. */ - - -#define _FS_MINIMIZE 0 /* 0 to 3 */ -/* The _FS_MINIMIZE option defines minimization level to remove some functions. -/ -/ 0: Full function. -/ 1: f_stat, f_getfree, f_unlink, f_mkdir, f_chmod, f_truncate and f_rename -/ are removed. -/ 2: f_opendir and f_readdir are removed in addition to 1. -/ 3: f_lseek is removed in addition to 2. */ - - -#define _USE_STRFUNC 0 /* 0:Disable or 1-2:Enable */ -/* To enable string functions, set _USE_STRFUNC to 1 or 2. */ - - -#define _USE_MKFS 1 /* 0:Disable or 1:Enable */ -/* To enable f_mkfs function, set _USE_MKFS to 1 and set _FS_READONLY to 0 */ - - -#define _USE_FORWARD 0 /* 0:Disable or 1:Enable */ -/* To enable f_forward function, set _USE_FORWARD to 1 and set _FS_TINY to 1. */ - - -#define _USE_FASTSEEK 0 /* 0:Disable or 1:Enable */ -/* To enable fast seek feature, set _USE_FASTSEEK to 1. */ - - - -/*---------------------------------------------------------------------------/ -/ Locale and Namespace Configurations -/----------------------------------------------------------------------------*/ - -#define _CODE_PAGE 1251 -/* The _CODE_PAGE specifies the OEM code page to be used on the target system. -/ Incorrect setting of the code page can cause a file open failure. -/ -/ 932 - Japanese Shift-JIS (DBCS, OEM, Windows) -/ 936 - Simplified Chinese GBK (DBCS, OEM, Windows) -/ 949 - Korean (DBCS, OEM, Windows) -/ 950 - Traditional Chinese Big5 (DBCS, OEM, Windows) -/ 1250 - Central Europe (Windows) -/ 1251 - Cyrillic (Windows) -/ 1252 - Latin 1 (Windows) -/ 1253 - Greek (Windows) -/ 1254 - Turkish (Windows) -/ 1255 - Hebrew (Windows) -/ 1256 - Arabic (Windows) -/ 1257 - Baltic (Windows) -/ 1258 - Vietnam (OEM, Windows) -/ 437 - U.S. (OEM) -/ 720 - Arabic (OEM) -/ 737 - Greek (OEM) -/ 775 - Baltic (OEM) -/ 850 - Multilingual Latin 1 (OEM) -/ 858 - Multilingual Latin 1 + Euro (OEM) -/ 852 - Latin 2 (OEM) -/ 855 - Cyrillic (OEM) -/ 866 - Russian (OEM) -/ 857 - Turkish (OEM) -/ 862 - Hebrew (OEM) -/ 874 - Thai (OEM, Windows) -/ 1 - ASCII only (Valid for non LFN cfg.) -*/ - - -#define _USE_LFN 3 /* 0 to 3 */ -#define _MAX_LFN 255 /* Maximum LFN length to handle (12 to 255) */ -/* The _USE_LFN option switches the LFN support. -/ -/ 0: Disable LFN feature. _MAX_LFN and _LFN_UNICODE have no effect. -/ 1: Enable LFN with static working buffer on the BSS. Always NOT reentrant. -/ 2: Enable LFN with dynamic working buffer on the STACK. -/ 3: Enable LFN with dynamic working buffer on the HEAP. -/ -/ The LFN working buffer occupies (_MAX_LFN + 1) * 2 bytes. To enable LFN, -/ Unicode handling functions ff_convert() and ff_wtoupper() must be added -/ to the project. When enable to use heap, memory control functions -/ ff_memalloc() and ff_memfree() must be added to the project. */ - - -#define _LFN_UNICODE 0 /* 0:ANSI/OEM or 1:Unicode */ -/* To switch the character code set on FatFs API to Unicode, -/ enable LFN feature and set _LFN_UNICODE to 1. */ - - -#define _FS_RPATH 0 /* 0 to 2 */ -/* The _FS_RPATH option configures relative path feature. -/ -/ 0: Disable relative path feature and remove related functions. -/ 1: Enable relative path. f_chdrive() and f_chdir() are available. -/ 2: f_getcwd() is available in addition to 1. -/ -/ Note that output of the f_readdir fnction is affected by this option. */ - - - -/*---------------------------------------------------------------------------/ -/ Physical Drive Configurations -/----------------------------------------------------------------------------*/ - -#define _VOLUMES 1 -/* Number of volumes (logical drives) to be used. */ - - -#define _MAX_SS 512 /* 512, 1024, 2048 or 4096 */ -/* Maximum sector size to be handled. -/ Always set 512 for memory card and hard disk but a larger value may be -/ required for on-board flash memory, floppy disk and optical disk. -/ When _MAX_SS is larger than 512, it configures FatFs to variable sector size -/ and GET_SECTOR_SIZE command must be implememted to the disk_ioctl function. */ - - -#define _MULTI_PARTITION 0 /* 0:Single partition, 1/2:Enable multiple partition */ -/* When set to 0, each volume is bound to the same physical drive number and -/ it can mount only first primaly partition. When it is set to 1, each volume -/ is tied to the partitions listed in VolToPart[]. */ - - -#define _USE_ERASE 1 /* 0:Disable or 1:Enable */ -/* To enable sector erase feature, set _USE_ERASE to 1. CTRL_ERASE_SECTOR command -/ should be added to the disk_ioctl functio. */ - - - -/*---------------------------------------------------------------------------/ -/ System Configurations -/----------------------------------------------------------------------------*/ - -#define _WORD_ACCESS 1 /* 0 or 1 */ -/* Set 0 first and it is always compatible with all platforms. The _WORD_ACCESS -/ option defines which access method is used to the word data on the FAT volume. -/ -/ 0: Byte-by-byte access. -/ 1: Word access. Do not choose this unless following condition is met. -/ -/ When the byte order on the memory is big-endian or address miss-aligned word -/ access results incorrect behavior, the _WORD_ACCESS must be set to 0. -/ If it is not the case, the value can also be set to 1 to improve the -/ performance and code size. -*/ - - -/* A header file that defines sync object types on the O/S, such as -/ windows.h, ucos_ii.h and semphr.h, must be included prior to ff.h. */ - -#define _FS_REENTRANT 0 /* 0:Disable or 1:Enable */ -#define _FS_TIMEOUT 1000 /* Timeout period in unit of time ticks */ -#define _SYNC_t Semaphore * /* O/S dependent type of sync object. e.g. HANDLE, OS_EVENT*, ID and etc.. */ - -/* The _FS_REENTRANT option switches the reentrancy (thread safe) of the FatFs module. -/ -/ 0: Disable reentrancy. _SYNC_t and _FS_TIMEOUT have no effect. -/ 1: Enable reentrancy. Also user provided synchronization handlers, -/ ff_req_grant, ff_rel_grant, ff_del_syncobj and ff_cre_syncobj -/ function must be added to the project. */ - - -#define _FS_SHARE 0 /* 0:Disable or >=1:Enable */ -/* To enable file shareing feature, set _FS_SHARE to 1 or greater. The value - defines how many files can be opened simultaneously. */ - - -#endif /* _FFCONFIG */ diff --git a/testhal/STM32F4xx/SDC/halconf.h b/testhal/STM32F4xx/SDC/halconf.h deleted file mode 100644 index 7c79feea0..000000000 --- a/testhal/STM32F4xx/SDC/halconf.h +++ /dev/null @@ -1,319 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC TRUE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief Write timeout in milliseconds. - */ -#if !defined(SDC_WRITE_TIMEOUT_MS) || defined(__DOXYGEN__) -#define SDC_WRITE_TIMEOUT_MS 250 -#endif - -/** - * @brief Write timeout in milliseconds. - */ -#if !defined(SDC_READ_TIMEOUT_MS) || defined(__DOXYGEN__) -#define SDC_READ_TIMEOUT_MS 5 -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/SDC/main.c b/testhal/STM32F4xx/SDC/main.c deleted file mode 100644 index 721eac66b..000000000 --- a/testhal/STM32F4xx/SDC/main.c +++ /dev/null @@ -1,382 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include -#include "ch.h" -#include "hal.h" - -#include "shell.h" -#include "chprintf.h" - -#include "ff.h" - -#define SDC_DATA_DESTRUCTIVE_TEST FALSE - -#define SDC_BURST_SIZE 8 /* how many sectors reads at once */ -static uint8_t outbuf[MMCSD_BLOCK_SIZE * SDC_BURST_SIZE + 1]; -static uint8_t inbuf[MMCSD_BLOCK_SIZE * SDC_BURST_SIZE + 1]; - -/* FS object.*/ -static FATFS SDC_FS; - -/* FS mounted and ready.*/ -static bool_t fs_ready = FALSE; - -/** - * @brief Parody of UNIX badblocks program. - * - * @param[in] start first block to check - * @param[in] end last block to check - * @param[in] blockatonce number of blocks to check at once - * @param[in] pattern check pattern - * - * @return The operation status. - * @retval SDC_SUCCESS operation succeeded, the requested blocks have been - * read. - * @retval SDC_FAILED operation failed, the state of the buffer is uncertain. - */ -bool_t badblocks(uint32_t start, uint32_t end, uint32_t blockatonce, uint8_t pattern){ - uint32_t position = 0; - uint32_t i = 0; - - chDbgCheck(blockatonce <= SDC_BURST_SIZE, "badblocks"); - - /* fill control buffer */ - for (i=0; i < MMCSD_BLOCK_SIZE * blockatonce; i++) - outbuf[i] = pattern; - - /* fill SD card with pattern. */ - position = start; - while (position < end){ - if (sdcWrite(&SDCD1, position, outbuf, blockatonce)) - goto ERROR; - position += blockatonce; - } - - /* read and compare. */ - position = start; - while (position < end){ - if (sdcRead(&SDCD1, position, inbuf, blockatonce)) - goto ERROR; - if (memcmp(inbuf, outbuf, blockatonce * MMCSD_BLOCK_SIZE) != 0) - goto ERROR; - position += blockatonce; - } - return FALSE; - -ERROR: - return TRUE; -} - -/** - * - */ -void fillbuffer(uint8_t pattern, uint8_t *b){ - uint32_t i = 0; - for (i=0; i < MMCSD_BLOCK_SIZE * SDC_BURST_SIZE; i++) - b[i] = pattern; -} - -/** - * - */ -void fillbuffers(uint8_t pattern){ - fillbuffer(pattern, inbuf); - fillbuffer(pattern, outbuf); -} - -/** - * - */ -void cmd_sdiotest(BaseSequentialStream *chp, int argc, char *argv[]){ - (void)argc; - (void)argv; - uint32_t i = 0; - - chprintf(chp, "Trying to connect SDIO... "); - chThdSleepMilliseconds(100); - - if (!sdcConnect(&SDCD1)) { - - chprintf(chp, "OK\r\n"); - chprintf(chp, "*** Card CSD content is: "); - chprintf(chp, "%X %X %X %X \r\n", (&SDCD1)->csd[3], (&SDCD1)->csd[2], - (&SDCD1)->csd[1], (&SDCD1)->csd[0]); - - chprintf(chp, "Single aligned read..."); - chThdSleepMilliseconds(100); - if (sdcRead(&SDCD1, 0, inbuf, 1)) - chSysHalt(); - chprintf(chp, " OK\r\n"); - chThdSleepMilliseconds(100); - - - chprintf(chp, "Single unaligned read..."); - chThdSleepMilliseconds(100); - if (sdcRead(&SDCD1, 0, inbuf + 1, 1)) - chSysHalt(); - if (sdcRead(&SDCD1, 0, inbuf + 2, 1)) - chSysHalt(); - if (sdcRead(&SDCD1, 0, inbuf + 3, 1)) - chSysHalt(); - chprintf(chp, " OK\r\n"); - chThdSleepMilliseconds(100); - - - chprintf(chp, "Multiple aligned reads..."); - chThdSleepMilliseconds(100); - fillbuffers(0x55); - /* fill reference buffer from SD card */ - if (sdcRead(&SDCD1, 0, inbuf, SDC_BURST_SIZE)) - chSysHalt(); - for (i=0; i<1000; i++){ - if (sdcRead(&SDCD1, 0, outbuf, SDC_BURST_SIZE)) - chSysHalt(); - if (memcmp(inbuf, outbuf, SDC_BURST_SIZE * MMCSD_BLOCK_SIZE) != 0) - chSysHalt(); - } - chprintf(chp, " OK\r\n"); - chThdSleepMilliseconds(100); - - - chprintf(chp, "Multiple unaligned reads..."); - chThdSleepMilliseconds(100); - fillbuffers(0x55); - /* fill reference buffer from SD card */ - if (sdcRead(&SDCD1, 0, inbuf + 1, SDC_BURST_SIZE)) - chSysHalt(); - for (i=0; i<1000; i++){ - if (sdcRead(&SDCD1, 0, outbuf + 1, SDC_BURST_SIZE)) - chSysHalt(); - if (memcmp(inbuf, outbuf, SDC_BURST_SIZE * MMCSD_BLOCK_SIZE) != 0) - chSysHalt(); - } - chprintf(chp, " OK\r\n"); - chThdSleepMilliseconds(100); - -#if SDC_DATA_DESTRUCTIVE_TEST - - chprintf(chp, "Single aligned write..."); - chThdSleepMilliseconds(100); - fillbuffer(0xAA, inbuf); - if (sdcWrite(&SDCD1, 0, inbuf, 1)) - chSysHalt(); - fillbuffer(0, outbuf); - if (sdcRead(&SDCD1, 0, outbuf, 1)) - chSysHalt(); - if (memcmp(inbuf, outbuf, MMCSD_BLOCK_SIZE) != 0) - chSysHalt(); - chprintf(chp, " OK\r\n"); - - chprintf(chp, "Single unaligned write..."); - chThdSleepMilliseconds(100); - fillbuffer(0xFF, inbuf); - if (sdcWrite(&SDCD1, 0, inbuf+1, 1)) - chSysHalt(); - fillbuffer(0, outbuf); - if (sdcRead(&SDCD1, 0, outbuf+1, 1)) - chSysHalt(); - if (memcmp(inbuf+1, outbuf+1, MMCSD_BLOCK_SIZE) != 0) - chSysHalt(); - chprintf(chp, " OK\r\n"); - - chprintf(chp, "Running badblocks at 0x10000 offset..."); - chThdSleepMilliseconds(100); - if(badblocks(0x10000, 0x11000, SDC_BURST_SIZE, 0xAA)) - chSysHalt(); - chprintf(chp, " OK\r\n"); -#endif /* !SDC_DATA_DESTRUCTIVE_TEST */ - - - /** - * Now perform some FS tests. - */ - - FRESULT err; - uint32_t clusters; - FATFS *fsp; - FIL FileObject; - uint32_t bytes_written; - uint32_t bytes_read; - FILINFO filinfo; - uint8_t teststring[] = {"This is test file\r\n"}; - - chprintf(chp, "Register working area for filesystem... "); - chThdSleepMilliseconds(100); - err = f_mount(0, &SDC_FS); - if (err != FR_OK){ - chSysHalt(); - } - else{ - fs_ready = TRUE; - chprintf(chp, "OK\r\n"); - } - - -#if SDC_DATA_DESTRUCTIVE_TEST - chprintf(chp, "Formatting... "); - chThdSleepMilliseconds(100); - err = f_mkfs (0,0,0); - if (err != FR_OK){ - chSysHalt(); - } - else{ - chprintf(chp, "OK\r\n"); - } -#endif /* SDC_DATA_DESTRUCTIVE_TEST */ - - - chprintf(chp, "Mount filesystem... "); - chThdSleepMilliseconds(100); - err = f_getfree("/", &clusters, &fsp); - if (err != FR_OK) { - chSysHalt(); - } - chprintf(chp, "OK\r\n"); - chprintf(chp, - "FS: %lu free clusters, %lu sectors per cluster, %lu bytes free\r\n", - clusters, (uint32_t)SDC_FS.csize, - clusters * (uint32_t)SDC_FS.csize * (uint32_t)MMCSD_BLOCK_SIZE); - - - chprintf(chp, "Create file \"chtest.txt\"... "); - chThdSleepMilliseconds(100); - err = f_open(&FileObject, "0:chtest.txt", FA_WRITE | FA_OPEN_ALWAYS); - if (err != FR_OK) { - chSysHalt(); - } - chprintf(chp, "OK\r\n"); - chprintf(chp, "Write some data in it... "); - chThdSleepMilliseconds(100); - err = f_write(&FileObject, teststring, sizeof(teststring), (void *)&bytes_written); - if (err != FR_OK) { - chSysHalt(); - } - else - chprintf(chp, "OK\r\n"); - - chprintf(chp, "Close file \"chtest.txt\"... "); - err = f_close(&FileObject); - if (err != FR_OK) { - chSysHalt(); - } - else - chprintf(chp, "OK\r\n"); - - chprintf(chp, "Check file size \"chtest.txt\"... "); - err = f_stat("0:chtest.txt", &filinfo); - chThdSleepMilliseconds(100); - if (err != FR_OK) { - chSysHalt(); - } - else{ - if (filinfo.fsize == sizeof(teststring)) - chprintf(chp, "OK\r\n"); - else - chSysHalt(); - } - - chprintf(chp, "Check file content \"chtest.txt\"... "); - err = f_open(&FileObject, "0:chtest.txt", FA_READ | FA_OPEN_EXISTING); - chThdSleepMilliseconds(100); - if (err != FR_OK) { - chSysHalt(); - } - uint8_t buf[sizeof(teststring)]; - err = f_read(&FileObject, buf, sizeof(teststring), (void *)&bytes_read); - if (err != FR_OK) { - chSysHalt(); - } - else{ - if (memcmp(teststring, buf, sizeof(teststring)) != 0){ - chSysHalt(); - } - else{ - chprintf(chp, "OK\r\n"); - } - } - - chprintf(chp, "Umount filesystem... "); - f_mount(0, NULL); - chprintf(chp, "OK\r\n"); - - chprintf(chp, "Disconnecting from SDIO..."); - chThdSleepMilliseconds(100); - if (sdcDisconnect(&SDCD1)) - chSysHalt(); - chprintf(chp, " OK\r\n"); - chprintf(chp, "------------------------------------------------------\r\n"); - chprintf(chp, "All tests passed successfully.\r\n"); - chThdSleepMilliseconds(100); - } - else{ - chSysHalt(); - } -} - - -/* - * SDIO configuration. - */ -static const SDCConfig sdccfg = { - 0 -}; - -/** - * - */ -static SerialConfig ser_cfg = { - 115200, - 0, - 0, - 0, -}; -static const ShellCommand commands[] = { - {"sdiotest", cmd_sdiotest}, - {NULL, NULL} -}; -static const ShellConfig shell_cfg1 = { - (BaseSequentialStream *)&SD2, - commands -}; - -/* - * Application entry point. - */ -int main(void) { - halInit(); - chSysInit(); - - /* start debugging serial link */ - sdStart(&SD2, &ser_cfg); - shellInit(); - static WORKING_AREA(waShell, 2048); - shellCreateStatic(&shell_cfg1, waShell, sizeof(waShell), NORMALPRIO); - - /* - * Initializes the SDIO drivers. - */ - sdcStart(&SDCD1, &sdccfg); - - /* - * Normal main() thread activity. - * Blinking signaling about successful passing. - */ - while (TRUE) { - palTogglePad(GPIOB, GPIOB_LED_R); - chThdSleepMilliseconds(100); - } -} diff --git a/testhal/STM32F4xx/SDC/mcuconf.h b/testhal/STM32F4xx/SDC/mcuconf.h deleted file mode 100644 index a8d51babe..000000000 --- a/testhal/STM32F4xx/SDC/mcuconf.h +++ /dev/null @@ -1,278 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_VOS STM32_VOS_HIGH -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C3_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32F4xx/SDC/readme.txt b/testhal/STM32F4xx/SDC/readme.txt deleted file mode 100644 index b897676af..000000000 --- a/testhal/STM32F4xx/SDC/readme.txt +++ /dev/null @@ -1,26 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - SDC driver demo for STM32. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Olimex ST_STM3210E_EVAL board. - -** The Demo ** - -The application demonstrates the use of the STM32 SDC driver. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F4xx/SPI/.cproject b/testhal/STM32F4xx/SPI/.cproject deleted file mode 100644 index 6b2c42453..000000000 --- a/testhal/STM32F4xx/SPI/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F4xx/SPI/.project b/testhal/STM32F4xx/SPI/.project deleted file mode 100644 index effebe09e..000000000 --- a/testhal/STM32F4xx/SPI/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F4xx-SPI - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32F4_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F4xx/SPI/Makefile b/testhal/STM32F4xx/SPI/Makefile deleted file mode 100644 index 86de6d81c..000000000 --- a/testhal/STM32F4xx/SPI/Makefile +++ /dev/null @@ -1,222 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32F4_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F4xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F407xG.ld -#LDSCRIPT= $(PORTLD)/STM32F407xG_CCM.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/chprintf.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F4xx/SPI/chconf.h b/testhal/STM32F4xx/SPI/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F4xx/SPI/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/SPI/halconf.h b/testhal/STM32F4xx/SPI/halconf.h deleted file mode 100644 index 3e1cafbbf..000000000 --- a/testhal/STM32F4xx/SPI/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/SPI/main.c b/testhal/STM32F4xx/SPI/main.c deleted file mode 100644 index 04999434b..000000000 --- a/testhal/STM32F4xx/SPI/main.c +++ /dev/null @@ -1,138 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * Maximum speed SPI configuration (21MHz, CPHA=0, CPOL=0, MSb first). - */ -static const SPIConfig hs_spicfg = { - NULL, - GPIOB, - 12, - 0 -}; - -/* - * Low speed SPI configuration (328.125kHz, CPHA=0, CPOL=0, MSb first). - */ -static const SPIConfig ls_spicfg = { - NULL, - GPIOB, - 12, - SPI_CR1_BR_2 | SPI_CR1_BR_1 -}; - -/* - * SPI TX and RX buffers. - */ -static uint8_t txbuf[512]; -static uint8_t rxbuf[512]; - -/* - * SPI bus contender 1. - */ -static WORKING_AREA(spi_thread_1_wa, 256); -static msg_t spi_thread_1(void *p) { - - (void)p; - chRegSetThreadName("SPI thread 1"); - while (TRUE) { - spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ - palSetPad(GPIOD, GPIOD_LED5); /* LED ON. */ - spiStart(&SPID2, &hs_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID2); /* Slave Select assertion. */ - spiExchange(&SPID2, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID2); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID2); /* Ownership release. */ - } - return 0; -} - -/* - * SPI bus contender 2. - */ -static WORKING_AREA(spi_thread_2_wa, 256); -static msg_t spi_thread_2(void *p) { - - (void)p; - chRegSetThreadName("SPI thread 2"); - while (TRUE) { - spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ - palClearPad(GPIOD, GPIOD_LED5); /* LED OFF. */ - spiStart(&SPID2, &ls_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID2); /* Slave Select assertion. */ - spiExchange(&SPID2, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID2); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID2); /* Ownership release. */ - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * SPI2 I/O pins setup. - */ - palSetPadMode(GPIOB, 13, PAL_MODE_ALTERNATE(5) | - PAL_STM32_OSPEED_HIGHEST); /* New SCK. */ - palSetPadMode(GPIOB, 14, PAL_MODE_ALTERNATE(5) | - PAL_STM32_OSPEED_HIGHEST); /* New MISO. */ - palSetPadMode(GPIOB, 15, PAL_MODE_ALTERNATE(5) | - PAL_STM32_OSPEED_HIGHEST); /* New MOSI. */ - palSetPadMode(GPIOB, 12, PAL_MODE_OUTPUT_PUSHPULL | - PAL_STM32_OSPEED_HIGHEST); /* New CS. */ - palSetPad(GPIOB, 12); - - /* - * Prepare transmit pattern. - */ - for (i = 0; i < sizeof(txbuf); i++) - txbuf[i] = (uint8_t)i; - - /* - * Starting the transmitter and receiver threads. - */ - chThdCreateStatic(spi_thread_1_wa, sizeof(spi_thread_1_wa), - NORMALPRIO + 1, spi_thread_1, NULL); - chThdCreateStatic(spi_thread_2_wa, sizeof(spi_thread_2_wa), - NORMALPRIO + 1, spi_thread_2, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32F4xx/SPI/mcuconf.h b/testhal/STM32F4xx/SPI/mcuconf.h deleted file mode 100644 index 21f5e5dcc..000000000 --- a/testhal/STM32F4xx/SPI/mcuconf.h +++ /dev/null @@ -1,278 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_VOS STM32_VOS_HIGH -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C3_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 TRUE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32F4xx/SPI/readme.txt b/testhal/STM32F4xx/SPI/readme.txt deleted file mode 100644 index d3d78bc8c..000000000 --- a/testhal/STM32F4xx/SPI/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - SPI driver demo for STM32F4xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an ST STM32F4-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F4xx SPI driver. - -** Board Setup ** - -- Connect PB14 and PB15 together for SPI loop-back. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F4xx/UART/.cproject b/testhal/STM32F4xx/UART/.cproject deleted file mode 100644 index 7bb8c14a7..000000000 --- a/testhal/STM32F4xx/UART/.cproject +++ /dev/null @@ -1,56 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F4xx/UART/.project b/testhal/STM32F4xx/UART/.project deleted file mode 100644 index 06e8b52e8..000000000 --- a/testhal/STM32F4xx/UART/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F4xx-UART - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32F4_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32F4xx/UART/Makefile b/testhal/STM32F4xx/UART/Makefile deleted file mode 100644 index 86de6d81c..000000000 --- a/testhal/STM32F4xx/UART/Makefile +++ /dev/null @@ -1,222 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32F4_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F4xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F407xG.ld -#LDSCRIPT= $(PORTLD)/STM32F407xG_CCM.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/chprintf.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F4xx/UART/chconf.h b/testhal/STM32F4xx/UART/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F4xx/UART/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/UART/halconf.h b/testhal/STM32F4xx/UART/halconf.h deleted file mode 100644 index 520e71b0a..000000000 --- a/testhal/STM32F4xx/UART/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART TRUE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/UART/main.c b/testhal/STM32F4xx/UART/main.c deleted file mode 100644 index fcd6fa965..000000000 --- a/testhal/STM32F4xx/UART/main.c +++ /dev/null @@ -1,163 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static VirtualTimer vt3, vt4, vt5; - -static const uint8_t message[] = "0123456789ABCDEF"; -static uint8_t buffer[16]; - -static void led3off(void *p) { - - (void)p; - palClearPad(GPIOD, GPIOD_LED3); -} - -static void led4off(void *p) { - - (void)p; - palClearPad(GPIOD, GPIOD_LED4); -} - -static void led5off(void *p) { - - (void)p; - palClearPad(GPIOD, GPIOD_LED5); -} - -/* - * This callback is invoked when a transmission buffer has been completely - * read by the driver. - */ -static void txend1(UARTDriver *uartp) { - - (void)uartp; -} - -/* - * This callback is invoked when a transmission has physically completed. - */ -static void txend2(UARTDriver *uartp) { - - (void)uartp; - palSetPad(GPIOD, GPIOD_LED5); - chSysLockFromIsr(); - if (chVTIsArmedI(&vt5)) - chVTResetI(&vt5); - chVTSetI(&vt5, MS2ST(200), led5off, NULL); - chSysUnlockFromIsr(); -} - -/* - * This callback is invoked on a receive error, the errors mask is passed - * as parameter. - */ -static void rxerr(UARTDriver *uartp, uartflags_t e) { - - (void)uartp; - (void)e; -} - -/* - * This callback is invoked when a character is received but the application - * was not ready to receive it, the character is passed as parameter. - */ -static void rxchar(UARTDriver *uartp, uint16_t c) { - - (void)uartp; - (void)c; - /* Flashing the LED each time a character is received.*/ - palSetPad(GPIOD, GPIOD_LED4); - chSysLockFromIsr(); - if (chVTIsArmedI(&vt4)) - chVTResetI(&vt4); - chVTSetI(&vt4, MS2ST(200), led4off, NULL); - chSysUnlockFromIsr(); -} - -/* - * This callback is invoked when a receive buffer has been completely written. - */ -static void rxend(UARTDriver *uartp) { - - (void)uartp; - - /* Flashing the LED each time a character is received.*/ - palSetPad(GPIOD, GPIOD_LED3); - chSysLockFromIsr(); - if (chVTIsArmedI(&vt3)) - chVTResetI(&vt3); - chVTSetI(&vt3, MS2ST(200), led3off, NULL); - chSysUnlockFromIsr(); -} - -/* - * UART driver configuration structure. - */ -static UARTConfig uart_cfg_1 = { - txend1, - txend2, - rxend, - rxchar, - rxerr, - 38400, - 0, - USART_CR2_LINEN, - 0 -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the UART driver 2, PA2(TX) and PA3(RX) are routed to USART2. - */ - uartStart(&UARTD2, &uart_cfg_1); - palSetPadMode(GPIOA, 2, PAL_MODE_ALTERNATE(7)); - palSetPadMode(GPIOA, 3, PAL_MODE_ALTERNATE(7)); - - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - if (palReadPad(GPIOA, GPIOA_BUTTON)) { - /* - * Starts both a transmission and a receive operations, both will be - * handled entirely in background. - */ - uartStopReceive(&UARTD2); - uartStopSend(&UARTD2); - uartStartReceive(&UARTD2, 16, buffer); - uartStartSend(&UARTD2, 16, message); - } - chThdSleepMilliseconds(500); - } -} diff --git a/testhal/STM32F4xx/UART/mcuconf.h b/testhal/STM32F4xx/UART/mcuconf.h deleted file mode 100644 index 102c44dd7..000000000 --- a/testhal/STM32F4xx/UART/mcuconf.h +++ /dev/null @@ -1,278 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_VOS STM32_VOS_HIGH -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C3_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 TRUE -#define STM32_UART_USE_USART2 TRUE -#define STM32_UART_USE_USART3 TRUE -#define STM32_UART_USE_USART6 TRUE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32F4xx/UART/readme.txt b/testhal/STM32F4xx/UART/readme.txt deleted file mode 100644 index 19a8e26da..000000000 --- a/testhal/STM32F4xx/UART/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - UART driver demo for STM32F4xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F4-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F4xx UART driver. - -** Board Setup ** - -- Connect an RS232 transceiver to pins PA2(TX) and PA3(RX). -- Connect a terminal emulator to the transceiver (38400-N-8-1). - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32F4xx/USB_CDC/.cproject b/testhal/STM32F4xx/USB_CDC/.cproject deleted file mode 100644 index 16a94a05d..000000000 --- a/testhal/STM32F4xx/USB_CDC/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32F4xx/USB_CDC/.project b/testhal/STM32F4xx/USB_CDC/.project deleted file mode 100644 index 135abc544..000000000 --- a/testhal/STM32F4xx/USB_CDC/.project +++ /dev/null @@ -1,43 +0,0 @@ - - - STM32F4xx-USB_CDC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/OLIMEX_STM32_E407 - - - os - 2 - CHIBIOS/os - - - test - 2 - CHIBIOS/test - - - diff --git a/testhal/STM32F4xx/USB_CDC/Makefile b/testhal/STM32F4xx/USB_CDC/Makefile deleted file mode 100644 index 8c329e2d7..000000000 --- a/testhal/STM32F4xx/USB_CDC/Makefile +++ /dev/null @@ -1,223 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/OLIMEX_STM32_E407/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F4xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F407xG.ld -#LDSCRIPT= $(PORTLD)/STM32F407xG_CCM.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(CHIBIOS)/os/various/shell.c \ - $(CHIBIOS)/os/various/chprintf.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32F4xx/USB_CDC/chconf.h b/testhal/STM32F4xx/USB_CDC/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32F4xx/USB_CDC/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/USB_CDC/halconf.h b/testhal/STM32F4xx/USB_CDC/halconf.h deleted file mode 100644 index cd76b0cfe..000000000 --- a/testhal/STM32F4xx/USB_CDC/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32F4xx/USB_CDC/main.c b/testhal/STM32F4xx/USB_CDC/main.c deleted file mode 100644 index 8bdf3c0ba..000000000 --- a/testhal/STM32F4xx/USB_CDC/main.c +++ /dev/null @@ -1,522 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include -#include - -#include "ch.h" -#include "hal.h" -#include "test.h" - -#include "shell.h" -#include "chprintf.h" - -/*===========================================================================*/ -/* USB related stuff. */ -/*===========================================================================*/ - -/* - * Endpoints to be used for USBD2. - */ -#define USBD2_DATA_REQUEST_EP 1 -#define USBD2_DATA_AVAILABLE_EP 1 -#define USBD2_INTERRUPT_REQUEST_EP 2 - -/* - * Serial over USB Driver structure. - */ -static SerialUSBDriver SDU2; - -/* - * USB Device Descriptor. - */ -static const uint8_t vcom_device_descriptor_data[18] = { - USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ - 0x02, /* bDeviceClass (CDC). */ - 0x00, /* bDeviceSubClass. */ - 0x00, /* bDeviceProtocol. */ - 0x40, /* bMaxPacketSize. */ - 0x0483, /* idVendor (ST). */ - 0x5740, /* idProduct. */ - 0x0200, /* bcdDevice. */ - 1, /* iManufacturer. */ - 2, /* iProduct. */ - 3, /* iSerialNumber. */ - 1) /* bNumConfigurations. */ -}; - -/* - * Device Descriptor wrapper. - */ -static const USBDescriptor vcom_device_descriptor = { - sizeof vcom_device_descriptor_data, - vcom_device_descriptor_data -}; - -/* Configuration Descriptor tree for a CDC.*/ -static const uint8_t vcom_configuration_descriptor_data[67] = { - /* Configuration Descriptor.*/ - USB_DESC_CONFIGURATION(67, /* wTotalLength. */ - 0x02, /* bNumInterfaces. */ - 0x01, /* bConfigurationValue. */ - 0, /* iConfiguration. */ - 0xC0, /* bmAttributes (self powered). */ - 50), /* bMaxPower (100mA). */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x01, /* bNumEndpoints. */ - 0x02, /* bInterfaceClass (Communications - Interface Class, CDC section - 4.2). */ - 0x02, /* bInterfaceSubClass (Abstract - Control Model, CDC section 4.3). */ - 0x01, /* bInterfaceProtocol (AT commands, - CDC section 4.4). */ - 0), /* iInterface. */ - /* Header Functional Descriptor (CDC section 5.2.3).*/ - USB_DESC_BYTE (5), /* bLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header - Functional Descriptor. */ - USB_DESC_BCD (0x0110), /* bcdCDC. */ - /* Call Management Functional Descriptor. */ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */ - USB_DESC_BYTE (0x01), /* bDataInterface. */ - /* ACM Functional Descriptor.*/ - USB_DESC_BYTE (4), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract - Control Management Descriptor). */ - USB_DESC_BYTE (0x02), /* bmCapabilities. */ - /* Union Functional Descriptor.*/ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bMasterInterface (Communication - Class Interface). */ - USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class - Interface). */ - /* Endpoint 2 Descriptor.*/ - USB_DESC_ENDPOINT (USBD2_INTERRUPT_REQUEST_EP|0x80, - 0x03, /* bmAttributes (Interrupt). */ - 0x0008, /* wMaxPacketSize. */ - 0xFF), /* bInterval. */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x02, /* bNumEndpoints. */ - 0x0A, /* bInterfaceClass (Data Class - Interface, CDC section 4.5). */ - 0x00, /* bInterfaceSubClass (CDC section - 4.6). */ - 0x00, /* bInterfaceProtocol (CDC section - 4.7). */ - 0x00), /* iInterface. */ - /* Endpoint 3 Descriptor.*/ - USB_DESC_ENDPOINT (USBD2_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00), /* bInterval. */ - /* Endpoint 1 Descriptor.*/ - USB_DESC_ENDPOINT (USBD2_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00) /* bInterval. */ -}; - -/* - * Configuration Descriptor wrapper. - */ -static const USBDescriptor vcom_configuration_descriptor = { - sizeof vcom_configuration_descriptor_data, - vcom_configuration_descriptor_data -}; - -/* - * U.S. English language identifier. - */ -static const uint8_t vcom_string0[] = { - USB_DESC_BYTE(4), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ -}; - -/* - * Vendor string. - */ -static const uint8_t vcom_string1[] = { - USB_DESC_BYTE(38), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0, - 'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0, - 'c', 0, 's', 0 -}; - -/* - * Device Description string. - */ -static const uint8_t vcom_string2[] = { - USB_DESC_BYTE(56), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0, - 'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0, - 'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0, - 'o', 0, 'r', 0, 't', 0 -}; - -/* - * Serial Number string. - */ -static const uint8_t vcom_string3[] = { - USB_DESC_BYTE(8), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - '0' + CH_KERNEL_MAJOR, 0, - '0' + CH_KERNEL_MINOR, 0, - '0' + CH_KERNEL_PATCH, 0 -}; - -/* - * Strings wrappers array. - */ -static const USBDescriptor vcom_strings[] = { - {sizeof vcom_string0, vcom_string0}, - {sizeof vcom_string1, vcom_string1}, - {sizeof vcom_string2, vcom_string2}, - {sizeof vcom_string3, vcom_string3} -}; - -/* - * Handles the GET_DESCRIPTOR callback. All required descriptors must be - * handled here. - */ -static const USBDescriptor *get_descriptor(USBDriver *usbp, - uint8_t dtype, - uint8_t dindex, - uint16_t lang) { - - (void)usbp; - (void)lang; - switch (dtype) { - case USB_DESCRIPTOR_DEVICE: - return &vcom_device_descriptor; - case USB_DESCRIPTOR_CONFIGURATION: - return &vcom_configuration_descriptor; - case USB_DESCRIPTOR_STRING: - if (dindex < 4) - return &vcom_strings[dindex]; - } - return NULL; -} - -/** - * @brief IN EP1 state. - */ -static USBInEndpointState ep1instate; - -/** - * @brief OUT EP1 state. - */ -static USBOutEndpointState ep1outstate; - -/** - * @brief EP1 initialization structure (both IN and OUT). - */ -static const USBEndpointConfig ep1config = { - USB_EP_MODE_TYPE_BULK, - NULL, - sduDataTransmitted, - sduDataReceived, - 0x0040, - 0x0040, - &ep1instate, - &ep1outstate, - 2, - NULL -}; - -/** - * @brief IN EP2 state. - */ -static USBInEndpointState ep2instate; - -/** - * @brief EP2 initialization structure (IN only). - */ -static const USBEndpointConfig ep2config = { - USB_EP_MODE_TYPE_INTR, - NULL, - sduInterruptTransmitted, - NULL, - 0x0010, - 0x0000, - &ep2instate, - NULL, - 1, - NULL -}; - -/* - * Handles the USB driver global events. - */ -static void usb_event(USBDriver *usbp, usbevent_t event) { - - switch (event) { - case USB_EVENT_RESET: - return; - case USB_EVENT_ADDRESS: - return; - case USB_EVENT_CONFIGURED: - chSysLockFromIsr(); - - /* Enables the endpoints specified into the configuration. - Note, this callback is invoked from an ISR so I-Class functions - must be used.*/ - usbInitEndpointI(usbp, USBD2_DATA_REQUEST_EP, &ep1config); - usbInitEndpointI(usbp, USBD2_INTERRUPT_REQUEST_EP, &ep2config); - - /* Resetting the state of the CDC subsystem.*/ - sduConfigureHookI(&SDU2); - - chSysUnlockFromIsr(); - return; - case USB_EVENT_SUSPEND: - return; - case USB_EVENT_WAKEUP: - return; - case USB_EVENT_STALLED: - return; - } - return; -} - -/* - * USB driver configuration. - */ -static const USBConfig usbcfg = { - usb_event, - get_descriptor, - sduRequestsHook, - NULL -}; - -/* - * Serial over USB driver configuration. - */ -static const SerialUSBConfig serusbcfg = { - &USBD2, - USBD2_DATA_REQUEST_EP, - USBD2_DATA_AVAILABLE_EP, - USBD2_INTERRUPT_REQUEST_EP -}; - -/*===========================================================================*/ -/* Command line related. */ -/*===========================================================================*/ - -#define SHELL_WA_SIZE THD_WA_SIZE(2048) -#define TEST_WA_SIZE THD_WA_SIZE(256) - -static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) { - size_t n, size; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: mem\r\n"); - return; - } - n = chHeapStatus(NULL, &size); - chprintf(chp, "core free memory : %u bytes\r\n", chCoreStatus()); - chprintf(chp, "heap fragments : %u\r\n", n); - chprintf(chp, "heap free total : %u bytes\r\n", size); -} - -static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) { - static const char *states[] = {THD_STATE_NAMES}; - Thread *tp; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: threads\r\n"); - return; - } - chprintf(chp, " addr stack prio refs state time\r\n"); - tp = chRegFirstThread(); - do { - chprintf(chp, "%.8lx %.8lx %4lu %4lu %9s %lu\r\n", - (uint32_t)tp, (uint32_t)tp->p_ctx.r13, - (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1), - states[tp->p_state], (uint32_t)tp->p_time); - tp = chRegNextThread(tp); - } while (tp != NULL); -} - -static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) { - Thread *tp; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: test\r\n"); - return; - } - tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriority(), - TestThread, chp); - if (tp == NULL) { - chprintf(chp, "out of memory\r\n"); - return; - } - chThdWait(tp); -} - -static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) { - static uint8_t buf[] = - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: write\r\n"); - return; - } - - while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) { - chSequentialStreamWrite(&SDU2, buf, sizeof buf - 1); - } - chprintf(chp, "\r\n\nstopped\r\n"); -} - -static const ShellCommand commands[] = { - {"mem", cmd_mem}, - {"threads", cmd_threads}, - {"test", cmd_test}, - {"write", cmd_write}, - {NULL, NULL} -}; - -static const ShellConfig shell_cfg1 = { - (BaseSequentialStream *)&SDU2, - commands -}; - -/*===========================================================================*/ -/* Generic code. */ -/*===========================================================================*/ - -/* - * Red LED blinker thread, times are in milliseconds. - */ -static WORKING_AREA(waThread1, 128); -static msg_t Thread1(void *arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - systime_t time; - - time = serusbcfg.usbp->state == USB_ACTIVE ? 250 : 500; - palClearPad(GPIOC, GPIOC_LED); - chThdSleepMilliseconds(time); - palSetPad(GPIOC, GPIOC_LED); - chThdSleepMilliseconds(time); - } -} - -/* - * Application entry point. - */ -int main(void) { - Thread *shelltp = NULL; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes a serial-over-USB CDC driver. - */ - sduObjectInit(&SDU2); - sduStart(&SDU2, &serusbcfg); - - /* - * Activates the USB driver and then the USB bus pull-up on D+. - * Note, a delay is inserted in order to not have to disconnect the cable - * after a reset. - */ - usbDisconnectBus(serusbcfg.usbp); - chThdSleepMilliseconds(1500); - usbStart(serusbcfg.usbp, &usbcfg); - usbConnectBus(serusbcfg.usbp); - - /* - * Stopping and restarting the USB in order to test the stop procedure. The - * following lines are not usually required. - */ - chThdSleepMilliseconds(3000); - usbDisconnectBus(serusbcfg.usbp); - usbStop(serusbcfg.usbp); - chThdSleepMilliseconds(1500); - usbStart(serusbcfg.usbp, &usbcfg); - usbConnectBus(serusbcfg.usbp); - - /* - * Shell manager initialization. - */ - shellInit(); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing except - * sleeping in a loop and check the button state. - */ - while (TRUE) { - if (!shelltp && (SDU2.config->usbp->state == USB_ACTIVE)) - shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO); - else if (chThdTerminated(shelltp)) { - chThdRelease(shelltp); /* Recovers memory of the previous shell. */ - shelltp = NULL; /* Triggers spawning of a new shell. */ - } - chThdSleepMilliseconds(1000); - } -} diff --git a/testhal/STM32F4xx/USB_CDC/mcuconf.h b/testhal/STM32F4xx/USB_CDC/mcuconf.h deleted file mode 100644 index 34138a27d..000000000 --- a/testhal/STM32F4xx/USB_CDC/mcuconf.h +++ /dev/null @@ -1,278 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 12 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_VOS STM32_VOS_HIGH -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C3_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 TRUE -#define STM32_USB_USE_OTG2 TRUE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 diff --git a/testhal/STM32F4xx/USB_CDC/readme.txt b/testhal/STM32F4xx/USB_CDC/readme.txt deleted file mode 100644 index a619a3ec1..000000000 --- a/testhal/STM32F4xx/USB_CDC/readme.txt +++ /dev/null @@ -1,26 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - USB-CDC driver demo for STM32. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Olimex STM32-E407 board. - -** The Demo ** - -The application demonstrates the use of the STM32 USB (OTG) driver. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32L1xx/ADC/.cproject b/testhal/STM32L1xx/ADC/.cproject deleted file mode 100644 index dd444dc30..000000000 --- a/testhal/STM32L1xx/ADC/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32L1xx/ADC/.project b/testhal/STM32L1xx/ADC/.project deleted file mode 100644 index 170610f4f..000000000 --- a/testhal/STM32L1xx/ADC/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32L1xx-ADC - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32L_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32L1xx/ADC/Makefile b/testhal/STM32L1xx/ADC/Makefile deleted file mode 100644 index 0d3a8e2b2..000000000 --- a/testhal/STM32L1xx/ADC/Makefile +++ /dev/null @@ -1,207 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32L_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32L1xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32L1xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32L152xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32L1xx/ADC/chconf.h b/testhal/STM32L1xx/ADC/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32L1xx/ADC/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32L1xx/ADC/halconf.h b/testhal/STM32L1xx/ADC/halconf.h deleted file mode 100644 index 85a5dbd3b..000000000 --- a/testhal/STM32L1xx/ADC/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC TRUE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32L1xx/ADC/main.c b/testhal/STM32L1xx/ADC/main.c deleted file mode 100644 index 9ca4b541f..000000000 --- a/testhal/STM32L1xx/ADC/main.c +++ /dev/null @@ -1,163 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#define ADC_GRP1_NUM_CHANNELS 1 -#define ADC_GRP1_BUF_DEPTH 8 - -#define ADC_GRP2_NUM_CHANNELS 8 -#define ADC_GRP2_BUF_DEPTH 16 - -static adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH]; -static adcsample_t samples2[ADC_GRP2_NUM_CHANNELS * ADC_GRP2_BUF_DEPTH]; - -/* - * ADC streaming callback. - */ -size_t nx = 0, ny = 0; -static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) { - - (void)adcp; - if (samples2 == buffer) { - nx += n; - } - else { - ny += n; - } -} - -static void adcerrorcallback(ADCDriver *adcp, adcerror_t err) { - - (void)adcp; - (void)err; -} - -/* - * ADC conversion group. - * Mode: Linear buffer, 8 samples of 1 channel, SW triggered. - * Channels: IN10. - */ -static const ADCConversionGroup adcgrpcfg1 = { - FALSE, - ADC_GRP1_NUM_CHANNELS, - NULL, - adcerrorcallback, - 0, /* CR1 */ - ADC_CR2_SWSTART, /* CR2 */ - 0, /* SMPR1 */ - ADC_SMPR2_SMP_AN10(ADC_SAMPLE_4), - 0, /* SMPR3 */ - ADC_SQR1_NUM_CH(ADC_GRP1_NUM_CHANNELS), - 0, 0, 0, /* SQR2, SQR3, SQR4 */ - ADC_SQR5_SQ1_N(ADC_CHANNEL_IN10) -}; - -/* - * ADC conversion group. - * Mode: Continuous, 16 samples of 8 channels, SW triggered. - * Channels: IN10, IN11, IN10, IN11, IN10, IN11, Sensor, VRef. - */ -static const ADCConversionGroup adcgrpcfg2 = { - TRUE, - ADC_GRP2_NUM_CHANNELS, - adccallback, - adcerrorcallback, - 0, /* CR1 */ - ADC_CR2_SWSTART, /* CR2 */ - 0, /* SMPR1 */ - ADC_SMPR2_SMP_AN11(ADC_SAMPLE_48) | ADC_SMPR2_SMP_AN10(ADC_SAMPLE_48) | - ADC_SMPR2_SMP_SENSOR(ADC_SAMPLE_192) | ADC_SMPR2_SMP_VREF(ADC_SAMPLE_192), - 0, /* SMPR3 */ - ADC_SQR1_NUM_CH(ADC_GRP2_NUM_CHANNELS), - 0, 0, /* SQR2, SQR3 */ - ADC_SQR4_SQ8_N(ADC_CHANNEL_SENSOR) | ADC_SQR4_SQ7_N(ADC_CHANNEL_VREFINT), - ADC_SQR5_SQ6_N(ADC_CHANNEL_IN11) | ADC_SQR5_SQ5_N(ADC_CHANNEL_IN10) | - ADC_SQR5_SQ4_N(ADC_CHANNEL_IN11) | ADC_SQR5_SQ3_N(ADC_CHANNEL_IN10) | - ADC_SQR5_SQ2_N(ADC_CHANNEL_IN11) | ADC_SQR5_SQ1_N(ADC_CHANNEL_IN10) -}; - -/* - * Red LEDs blinker thread, times are in milliseconds. - */ -static WORKING_AREA(waThread1, 128); -static msg_t Thread1(void *arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - palSetPad(GPIOB, GPIOB_LED4); - chThdSleepMilliseconds(500); - palClearPad(GPIOB, GPIOB_LED4); - chThdSleepMilliseconds(500); - } -} - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Setting up analog inputs used by the demo. - */ - palSetGroupMode(GPIOC, PAL_PORT_BIT(0) | PAL_PORT_BIT(1), - 0, PAL_MODE_INPUT_ANALOG); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Activates the ADC1 driver and the temperature sensor. - */ - adcStart(&ADCD1, NULL); - adcSTM32EnableTSVREFE(); - - /* - * Linear conversion. - */ - adcConvert(&ADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH); - chThdSleepMilliseconds(1000); - - /* - * Starts an ADC continuous conversion. - */ - adcStartConversion(&ADCD1, &adcgrpcfg2, samples2, ADC_GRP2_BUF_DEPTH); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - if (palReadPad(GPIOA, GPIOA_BUTTON)) { - adcStopConversion(&ADCD1); - adcSTM32DisableTSVREFE(); - } - chThdSleepMilliseconds(500); - } -} diff --git a/testhal/STM32L1xx/ADC/mcuconf.h b/testhal/STM32L1xx/ADC/mcuconf.h deleted file mode 100644 index f0bf4a0cc..000000000 --- a/testhal/STM32L1xx/ADC/mcuconf.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32L1xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32L1xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED TRUE -#define STM32_ADC_CLOCK_ENABLED TRUE -#define STM32_USB_CLOCK_ENABLED TRUE -#define STM32_MSIRANGE STM32_MSIRANGE_2M -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI -#define STM32_PLLMUL_VALUE 6 -#define STM32_PLLDIV_VALUE 3 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV1 -#define STM32_PPRE2 STM32_PPRE2_DIV1 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_MCOPRE STM32_MCOPRE_DIV1 -#define STM32_RTCSEL STM32_RTCSEL_LSE -#define STM32_RTCPRE STM32_RTCPRE_DIV2 -#define STM32_VOS STM32_VOS_1P8 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 TRUE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32L1xx/ADC/readme.txt b/testhal/STM32L1xx/ADC/readme.txt deleted file mode 100644 index 91e9574b3..000000000 --- a/testhal/STM32L1xx/ADC/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - ADC driver demo for STM32L1xx. ** -***************************************************************************** - -** TARGET ** - -The demo will on an STMicroelectronics STM32L-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32L1xx ADC driver. - -** Board Setup ** - -- Remove the LCD module. -- Connect PC0 to 3.3V and PC1 to GND for analog measurements. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32L1xx/EXT/.cproject b/testhal/STM32L1xx/EXT/.cproject deleted file mode 100644 index 2148e6575..000000000 --- a/testhal/STM32L1xx/EXT/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32L1xx/EXT/.project b/testhal/STM32L1xx/EXT/.project deleted file mode 100644 index c24be83e5..000000000 --- a/testhal/STM32L1xx/EXT/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32L1xx-EXT - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32L_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32L1xx/EXT/Makefile b/testhal/STM32L1xx/EXT/Makefile deleted file mode 100644 index 0d3a8e2b2..000000000 --- a/testhal/STM32L1xx/EXT/Makefile +++ /dev/null @@ -1,207 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32L_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32L1xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32L1xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32L152xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32L1xx/EXT/chconf.h b/testhal/STM32L1xx/EXT/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32L1xx/EXT/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32L1xx/EXT/halconf.h b/testhal/STM32L1xx/EXT/halconf.h deleted file mode 100644 index e0e0c38ff..000000000 --- a/testhal/STM32L1xx/EXT/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32L1xx/EXT/main.c b/testhal/STM32L1xx/EXT/main.c deleted file mode 100644 index c0820d139..000000000 --- a/testhal/STM32L1xx/EXT/main.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void led4off(void *arg) { - - (void)arg; - palClearPad(GPIOB, GPIOB_LED4); -} - -/* Triggered when the button is pressed or released. The LED4 is set to ON.*/ -static void extcb1(EXTDriver *extp, expchannel_t channel) { - static VirtualTimer vt4; - - (void)extp; - (void)channel; - palSetPad(GPIOB, GPIOB_LED4); - chSysLockFromIsr(); - if (chVTIsArmedI(&vt4)) - chVTResetI(&vt4); - /* LED4 set to OFF after 200mS.*/ - chVTSetI(&vt4, MS2ST(200), led4off, NULL); - chSysUnlockFromIsr(); -} - -static const EXTConfig extcfg = { - { - {EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOA, extcb1}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL} - } -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the EXT driver 1. - */ - extStart(&EXTD1, &extcfg); - - /* - * Normal main() thread activity, in this demo it enables and disables the - * button EXT channel using 5 seconds intervals. - */ - while (TRUE) { - chThdSleepMilliseconds(5000); - extChannelDisable(&EXTD1, 0); - chThdSleepMilliseconds(5000); - extChannelEnable(&EXTD1, 0); - } -} diff --git a/testhal/STM32L1xx/EXT/mcuconf.h b/testhal/STM32L1xx/EXT/mcuconf.h deleted file mode 100644 index 753e83df3..000000000 --- a/testhal/STM32L1xx/EXT/mcuconf.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32L1xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32L1xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED TRUE -#define STM32_ADC_CLOCK_ENABLED TRUE -#define STM32_USB_CLOCK_ENABLED TRUE -#define STM32_MSIRANGE STM32_MSIRANGE_2M -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI -#define STM32_PLLMUL_VALUE 6 -#define STM32_PLLDIV_VALUE 3 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV1 -#define STM32_PPRE2 STM32_PPRE2_DIV1 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_MCOPRE STM32_MCOPRE_DIV1 -#define STM32_RTCSEL STM32_RTCSEL_LSE -#define STM32_RTCPRE STM32_RTCPRE_DIV2 -#define STM32_VOS STM32_VOS_1P8 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32L1xx/EXT/readme.txt b/testhal/STM32L1xx/EXT/readme.txt deleted file mode 100644 index 16953a3c9..000000000 --- a/testhal/STM32L1xx/EXT/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - EXT driver demo for STM32L1xx. ** -***************************************************************************** - -** TARGET ** - -The demo will on an STMicroelectronics STM32L-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32L1xx EXT driver. - -** Board Setup ** - -None required. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32L1xx/IRQ_STORM/.cproject b/testhal/STM32L1xx/IRQ_STORM/.cproject deleted file mode 100644 index 5b23e9f4d..000000000 --- a/testhal/STM32L1xx/IRQ_STORM/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32L1xx/IRQ_STORM/.project b/testhal/STM32L1xx/IRQ_STORM/.project deleted file mode 100644 index 5cc197397..000000000 --- a/testhal/STM32L1xx/IRQ_STORM/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32L1xx-IRQ_STORM - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32L_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32L1xx/IRQ_STORM/Makefile b/testhal/STM32L1xx/IRQ_STORM/Makefile deleted file mode 100644 index 0d3a8e2b2..000000000 --- a/testhal/STM32L1xx/IRQ_STORM/Makefile +++ /dev/null @@ -1,207 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32L_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32L1xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32L1xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32L152xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32L1xx/IRQ_STORM/chconf.h b/testhal/STM32L1xx/IRQ_STORM/chconf.h deleted file mode 100644 index f943ea80c..000000000 --- a/testhal/STM32L1xx/IRQ_STORM/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE FALSE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32L1xx/IRQ_STORM/halconf.h b/testhal/STM32L1xx/IRQ_STORM/halconf.h deleted file mode 100644 index 117a5979b..000000000 --- a/testhal/STM32L1xx/IRQ_STORM/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT TRUE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32L1xx/IRQ_STORM/main.c b/testhal/STM32L1xx/IRQ_STORM/main.c deleted file mode 100644 index 88d575b18..000000000 --- a/testhal/STM32L1xx/IRQ_STORM/main.c +++ /dev/null @@ -1,328 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include - -#include "ch.h" -#include "hal.h" - -/*===========================================================================*/ -/* Configurable settings. */ -/*===========================================================================*/ - -#ifndef RANDOMIZE -#define RANDOMIZE FALSE -#endif - -#ifndef ITERATIONS -#define ITERATIONS 100 -#endif - -#ifndef NUM_THREADS -#define NUM_THREADS 4 -#endif - -#ifndef MAILBOX_SIZE -#define MAILBOX_SIZE 4 -#endif - -/*===========================================================================*/ -/* Test related code. */ -/*===========================================================================*/ - -#define MSG_SEND_LEFT 0 -#define MSG_SEND_RIGHT 1 - -static bool_t saturated; - -/* - * Mailboxes and buffers. - */ -static Mailbox mb[NUM_THREADS]; -static msg_t b[NUM_THREADS][MAILBOX_SIZE]; - -/* - * Test worker threads. - */ -static WORKING_AREA(waWorkerThread[NUM_THREADS], 128); -static msg_t WorkerThread(void *arg) { - static volatile unsigned x = 0; - static unsigned cnt = 0; - unsigned me = (unsigned)arg; - unsigned target; - unsigned r; - msg_t msg; - - chRegSetThreadName("worker"); - - /* Work loop.*/ - while (TRUE) { - /* Waiting for a message.*/ - chMBFetch(&mb[me], &msg, TIME_INFINITE); - -#if RANDOMIZE - /* Pseudo-random delay.*/ - { - chSysLock(); - r = rand() & 15; - chSysUnlock(); - while (r--) - x++; - } -#else - /* Fixed delay.*/ - { - r = me >> 4; - while (r--) - x++; - } -#endif - - /* Deciding in which direction to re-send the message.*/ - if (msg == MSG_SEND_LEFT) - target = me - 1; - else - target = me + 1; - - if (target < NUM_THREADS) { - /* If this thread is not at the end of a chain re-sending the message, - note this check works because the variable target is unsigned.*/ - msg = chMBPost(&mb[target], msg, TIME_IMMEDIATE); - if (msg != RDY_OK) - saturated = TRUE; - } - else { - /* Provides a visual feedback about the system.*/ - if (++cnt >= 500) { - cnt = 0; - palTogglePad(GPIOB, GPIOB_LED4); - } - } - } -} - -/* - * GPT2 callback. - */ -static void gpt2cb(GPTDriver *gptp) { - msg_t msg; - - (void)gptp; - chSysLockFromIsr(); - msg = chMBPostI(&mb[0], MSG_SEND_RIGHT); - if (msg != RDY_OK) - saturated = TRUE; - chSysUnlockFromIsr(); -} - -/* - * GPT3 callback. - */ -static void gpt3cb(GPTDriver *gptp) { - msg_t msg; - - (void)gptp; - chSysLockFromIsr(); - msg = chMBPostI(&mb[NUM_THREADS - 1], MSG_SEND_LEFT); - if (msg != RDY_OK) - saturated = TRUE; - chSysUnlockFromIsr(); -} - -/* - * GPT2 configuration. - */ -static const GPTConfig gpt2cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt2cb /* Timer callback.*/ -}; - -/* - * GPT3 configuration. - */ -static const GPTConfig gpt3cfg = { - 1000000, /* 1MHz timer clock.*/ - gpt3cb /* Timer callback.*/ -}; - - -/*===========================================================================*/ -/* Generic demo code. */ -/*===========================================================================*/ - -static void print(char *p) { - - while (*p) { - chSequentialStreamPut(&SD1, *p++); - } -} - -static void println(char *p) { - - while (*p) { - chSequentialStreamPut(&SD1, *p++); - } - chSequentialStreamWrite(&SD1, (uint8_t *)"\r\n", 2); -} - -static void printn(uint32_t n) { - char buf[16], *p; - - if (!n) - chSequentialStreamPut(&SD1, '0'); - else { - p = buf; - while (n) - *p++ = (n % 10) + '0', n /= 10; - while (p > buf) - chSequentialStreamPut(&SD1, *--p); - } -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - gptcnt_t interval, threshold, worst; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Prepares the Serial driver 1 and GPT drivers 2 and 3. - */ - sdStart(&SD1, NULL); /* Default is 38400-8-N-1.*/ - palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(7)); - palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(7)); - gptStart(&GPTD2, &gpt2cfg); - gptStart(&GPTD3, &gpt3cfg); - - /* - * Initializes the mailboxes and creates the worker threads. - */ - for (i = 0; i < NUM_THREADS; i++) { - chMBInit(&mb[i], b[i], MAILBOX_SIZE); - chThdCreateStatic(waWorkerThread[i], sizeof waWorkerThread[i], - NORMALPRIO - 20, WorkerThread, (void *)i); - } - - /* - * Test procedure. - */ - println(""); - println("*** ChibiOS/RT IRQ-STORM long duration test"); - println("***"); - print("*** Kernel: "); - println(CH_KERNEL_VERSION); - print("*** Compiled: "); - println(__DATE__ " - " __TIME__); -#ifdef CH_COMPILER_NAME - print("*** Compiler: "); - println(CH_COMPILER_NAME); -#endif - print("*** Architecture: "); - println(CH_ARCHITECTURE_NAME); -#ifdef CH_CORE_VARIANT_NAME - print("*** Core Variant: "); - println(CH_CORE_VARIANT_NAME); -#endif -#ifdef CH_PORT_INFO - print("*** Port Info: "); - println(CH_PORT_INFO); -#endif -#ifdef PLATFORM_NAME - print("*** Platform: "); - println(PLATFORM_NAME); -#endif -#ifdef BOARD_NAME - print("*** Test Board: "); - println(BOARD_NAME); -#endif - println("***"); - print("*** System Clock: "); - printn(STM32_SYSCLK); - println(""); - print("*** Iterations: "); - printn(ITERATIONS); - println(""); - print("*** Randomize: "); - printn(RANDOMIZE); - println(""); - print("*** Threads: "); - printn(NUM_THREADS); - println(""); - print("*** Mailbox size: "); - printn(MAILBOX_SIZE); - println(""); - - println(""); - worst = 0; - for (i = 1; i <= ITERATIONS; i++){ - print("Iteration "); - printn(i); - println(""); - saturated = FALSE; - threshold = 0; - for (interval = 2000; interval >= 20; interval -= interval / 10) { - gptStartContinuous(&GPTD2, interval - 1); /* Slightly out of phase.*/ - gptStartContinuous(&GPTD3, interval + 1); /* Slightly out of phase.*/ - chThdSleepMilliseconds(1000); - gptStopTimer(&GPTD2); - gptStopTimer(&GPTD3); - if (!saturated) - print("."); - else { - print("#"); - if (threshold == 0) - threshold = interval; - } - } - /* Gives the worker threads a chance to empty the mailboxes before next - cycle.*/ - chThdSleepMilliseconds(20); - println(""); - print("Saturated at "); - printn(threshold); - println(" uS"); - println(""); - if (threshold > worst) - worst = threshold; - } - gptStopTimer(&GPTD2); - gptStopTimer(&GPTD3); - - print("Worst case at "); - printn(worst); - println(" uS"); - println(""); - println("Test Complete"); - - /* - * Normal main() thread activity, nothing in this test. - */ - while (TRUE) { - chThdSleepMilliseconds(5000); - } - return 0; -} diff --git a/testhal/STM32L1xx/IRQ_STORM/mcuconf.h b/testhal/STM32L1xx/IRQ_STORM/mcuconf.h deleted file mode 100644 index e73375db2..000000000 --- a/testhal/STM32L1xx/IRQ_STORM/mcuconf.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32L1xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32L1xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED TRUE -#define STM32_ADC_CLOCK_ENABLED TRUE -#define STM32_USB_CLOCK_ENABLED TRUE -#define STM32_MSIRANGE STM32_MSIRANGE_2M -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI -#define STM32_PLLMUL_VALUE 6 -#define STM32_PLLDIV_VALUE 3 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV1 -#define STM32_PPRE2 STM32_PPRE2_DIV1 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_MCOPRE STM32_MCOPRE_DIV1 -#define STM32_RTCSEL STM32_RTCSEL_LSE -#define STM32_RTCPRE STM32_RTCPRE_DIV2 -#define STM32_VOS STM32_VOS_1P8 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 TRUE -#define STM32_GPT_USE_TIM3 TRUE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 6 -#define STM32_GPT_TIM3_IRQ_PRIORITY 10 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 TRUE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32L1xx/IRQ_STORM/readme.txt b/testhal/STM32L1xx/IRQ_STORM/readme.txt deleted file mode 100644 index 9483b1f02..000000000 --- a/testhal/STM32L1xx/IRQ_STORM/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - IRQ_STORM stress test demo for STM32L1xx. ** -***************************************************************************** - -** TARGET ** - -The demo will on an STMicroelectronics STM32L-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32L1xx GPT, PAL and Serial -drivers in order to implement a system stress demo. - -** Board Setup ** - -None. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32L1xx/PWM-ICU/.cproject b/testhal/STM32L1xx/PWM-ICU/.cproject deleted file mode 100644 index b96ec18ee..000000000 --- a/testhal/STM32L1xx/PWM-ICU/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32L1xx/PWM-ICU/.project b/testhal/STM32L1xx/PWM-ICU/.project deleted file mode 100644 index 393dbac2d..000000000 --- a/testhal/STM32L1xx/PWM-ICU/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32L1xx-PWM-ICU - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32L_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32L1xx/PWM-ICU/Makefile b/testhal/STM32L1xx/PWM-ICU/Makefile deleted file mode 100644 index 0d3a8e2b2..000000000 --- a/testhal/STM32L1xx/PWM-ICU/Makefile +++ /dev/null @@ -1,207 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32L_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32L1xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32L1xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32L152xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32L1xx/PWM-ICU/chconf.h b/testhal/STM32L1xx/PWM-ICU/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32L1xx/PWM-ICU/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32L1xx/PWM-ICU/halconf.h b/testhal/STM32L1xx/PWM-ICU/halconf.h deleted file mode 100644 index 2f74c82c8..000000000 --- a/testhal/STM32L1xx/PWM-ICU/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU TRUE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM TRUE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32L1xx/PWM-ICU/main.c b/testhal/STM32L1xx/PWM-ICU/main.c deleted file mode 100644 index 3ef877831..000000000 --- a/testhal/STM32L1xx/PWM-ICU/main.c +++ /dev/null @@ -1,138 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void pwmpcb(PWMDriver *pwmp) { - - (void)pwmp; - palClearPad(GPIOB, GPIOB_LED4); -} - -static void pwmc1cb(PWMDriver *pwmp) { - - (void)pwmp; - palSetPad(GPIOB, GPIOB_LED4); -} - -static PWMConfig pwmcfg = { - 10000, /* 10kHz PWM clock frequency. */ - 10000, /* Initial PWM period 1S. */ - pwmpcb, - { - {PWM_OUTPUT_ACTIVE_HIGH, pwmc1cb}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL}, - {PWM_OUTPUT_DISABLED, NULL} - }, - 0, -}; - -icucnt_t last_width, last_period; - -static void icuwidthcb(ICUDriver *icup) { - - palSetPad(GPIOB, GPIOB_LED3); - last_width = icuGetWidth(icup); -} - -static void icuperiodcb(ICUDriver *icup) { - - palClearPad(GPIOB, GPIOB_LED3); - last_period = icuGetPeriod(icup); -} - -static ICUConfig icucfg = { - ICU_INPUT_ACTIVE_HIGH, - 10000, /* 10kHz ICU clock frequency. */ - icuwidthcb, - icuperiodcb, - NULL, - ICU_CHANNEL_1 -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes the PWM driver 2 and ICU driver 3. - * GPIOA15 is the PWM output. - * GPIOC6 is the ICU input. - * The two pins have to be externally connected together. - */ - pwmStart(&PWMD2, &pwmcfg); - palSetPadMode(GPIOA, 15, PAL_MODE_ALTERNATE(1)); - icuStart(&ICUD3, &icucfg); - palSetPadMode(GPIOC, 6, PAL_MODE_ALTERNATE(2)); - icuEnable(&ICUD3); - chThdSleepMilliseconds(2000); - - /* - * Starts the PWM channel 0 using 75% duty cycle. - */ - pwmEnableChannel(&PWMD2, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD2, 7500)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 50% duty cycle. - */ - pwmEnableChannel(&PWMD2, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD2, 5000)); - chThdSleepMilliseconds(5000); - - /* - * Changes the PWM channel 0 to 25% duty cycle. - */ - pwmEnableChannel(&PWMD2, 0, PWM_PERCENTAGE_TO_WIDTH(&PWMD2, 2500)); - chThdSleepMilliseconds(5000); - - /* - * Changes PWM period to half second the duty cycle becomes 50% - * implicitly. - */ - pwmChangePeriod(&PWMD2, 5000); - chThdSleepMilliseconds(5000); - - /* - * Disables channel 0 and stops the drivers. - */ - pwmDisableChannel(&PWMD2, 0); - pwmStop(&PWMD2); - icuDisable(&ICUD3); - icuStop(&ICUD3); - palClearPad(GPIOB, GPIOB_LED3); - palClearPad(GPIOB, GPIOB_LED4); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32L1xx/PWM-ICU/mcuconf.h b/testhal/STM32L1xx/PWM-ICU/mcuconf.h deleted file mode 100644 index 961a41c01..000000000 --- a/testhal/STM32L1xx/PWM-ICU/mcuconf.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32L1xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32L1xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED TRUE -#define STM32_ADC_CLOCK_ENABLED TRUE -#define STM32_USB_CLOCK_ENABLED TRUE -#define STM32_MSIRANGE STM32_MSIRANGE_2M -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI -#define STM32_PLLMUL_VALUE 6 -#define STM32_PLLDIV_VALUE 3 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV1 -#define STM32_PPRE2 STM32_PPRE2_DIV1 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_MCOPRE STM32_MCOPRE_DIV1 -#define STM32_RTCSEL STM32_RTCSEL_LSE -#define STM32_RTCPRE STM32_RTCPRE_DIV2 -#define STM32_VOS STM32_VOS_1P8 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 TRUE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 TRUE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32L1xx/PWM-ICU/readme.txt b/testhal/STM32L1xx/PWM-ICU/readme.txt deleted file mode 100644 index 52a2dd2ad..000000000 --- a/testhal/STM32L1xx/PWM-ICU/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - PWM-ICU drivers demo for STM32L1xx. ** -***************************************************************************** - -** TARGET ** - -The demo will on an STMicroelectronics STM32L-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32L1xx PWM-ICU drivers. - -** Board Setup ** - -- Remove the LCD module. -- Connect PA15 and PC6 together. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32L1xx/SPI/.cproject b/testhal/STM32L1xx/SPI/.cproject deleted file mode 100644 index b2bc5eb2d..000000000 --- a/testhal/STM32L1xx/SPI/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32L1xx/SPI/.project b/testhal/STM32L1xx/SPI/.project deleted file mode 100644 index aef073cf3..000000000 --- a/testhal/STM32L1xx/SPI/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32L1xx-SPI - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32L_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32L1xx/SPI/Makefile b/testhal/STM32L1xx/SPI/Makefile deleted file mode 100644 index 0d3a8e2b2..000000000 --- a/testhal/STM32L1xx/SPI/Makefile +++ /dev/null @@ -1,207 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32L_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32L1xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32L1xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32L152xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32L1xx/SPI/chconf.h b/testhal/STM32L1xx/SPI/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32L1xx/SPI/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32L1xx/SPI/halconf.h b/testhal/STM32L1xx/SPI/halconf.h deleted file mode 100644 index 3e1cafbbf..000000000 --- a/testhal/STM32L1xx/SPI/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32L1xx/SPI/main.c b/testhal/STM32L1xx/SPI/main.c deleted file mode 100644 index da394e97b..000000000 --- a/testhal/STM32L1xx/SPI/main.c +++ /dev/null @@ -1,137 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * Maximum speed SPI configuration (16MHz, CPHA=0, CPOL=0, MSb first). - */ -static const SPIConfig hs_spicfg = { - NULL, - GPIOB, - 12, - 0 -}; - -/* - * Low speed SPI configuration (256kHz, CPHA=0, CPOL=0, MSb first). - */ -static const SPIConfig ls_spicfg = { - NULL, - GPIOB, - 12, - SPI_CR1_BR_2 | SPI_CR1_BR_1 -}; - -/* - * SPI TX and RX buffers. - */ -static uint8_t txbuf[512]; -static uint8_t rxbuf[512]; - -/* - * SPI bus contender 1. - */ -static WORKING_AREA(spi_thread_1_wa, 256); -static msg_t spi_thread_1(void *p) { - - (void)p; - chRegSetThreadName("SPI thread 1"); - while (TRUE) { - spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ - palSetPad(GPIOB, GPIOB_LED4); /* LED ON. */ - spiStart(&SPID2, &hs_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID2); /* Slave Select assertion. */ - spiExchange(&SPID2, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID2); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID2); /* Ownership release. */ - } - return 0; -} - -/* - * SPI bus contender 2. - */ -static WORKING_AREA(spi_thread_2_wa, 256); -static msg_t spi_thread_2(void *p) { - - (void)p; - chRegSetThreadName("SPI thread 2"); - while (TRUE) { - spiAcquireBus(&SPID2); /* Acquire ownership of the bus. */ - palClearPad(GPIOB, GPIOB_LED4); /* LED OFF. */ - spiStart(&SPID2, &ls_spicfg); /* Setup transfer parameters. */ - spiSelect(&SPID2); /* Slave Select assertion. */ - spiExchange(&SPID2, 512, - txbuf, rxbuf); /* Atomic transfer operations. */ - spiUnselect(&SPID2); /* Slave Select de-assertion. */ - spiReleaseBus(&SPID2); /* Ownership release. */ - } - return 0; -} - -/* - * Application entry point. - */ -int main(void) { - unsigned i; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * SPI1 I/O pins setup. - */ - palSetPadMode(GPIOB, 12, PAL_MODE_OUTPUT_PUSHPULL | - PAL_STM32_OSPEED_HIGHEST); /* NSS. */ - palSetPadMode(GPIOB, 13, PAL_MODE_ALTERNATE(5) | - PAL_STM32_OSPEED_HIGHEST); /* SCK. */ - palSetPadMode(GPIOB, 14, PAL_MODE_ALTERNATE(5)); /* MISO. */ - palSetPadMode(GPIOB, 15, PAL_MODE_ALTERNATE(5) | - PAL_STM32_OSPEED_HIGHEST); /* MOSI. */ - palSetPad(GPIOB, 12); - - /* - * Prepare transmit pattern. - */ - for (i = 0; i < sizeof(txbuf); i++) - txbuf[i] = (uint8_t)i; - - /* - * Starting the transmitter and receiver threads. - */ - chThdCreateStatic(spi_thread_1_wa, sizeof(spi_thread_1_wa), - NORMALPRIO + 1, spi_thread_1, NULL); - chThdCreateStatic(spi_thread_2_wa, sizeof(spi_thread_2_wa), - NORMALPRIO + 1, spi_thread_2, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } - return 0; -} diff --git a/testhal/STM32L1xx/SPI/mcuconf.h b/testhal/STM32L1xx/SPI/mcuconf.h deleted file mode 100644 index a992d3419..000000000 --- a/testhal/STM32L1xx/SPI/mcuconf.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32L1xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32L1xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED TRUE -#define STM32_ADC_CLOCK_ENABLED TRUE -#define STM32_USB_CLOCK_ENABLED TRUE -#define STM32_MSIRANGE STM32_MSIRANGE_2M -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI -#define STM32_PLLMUL_VALUE 6 -#define STM32_PLLDIV_VALUE 3 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV1 -#define STM32_PPRE2 STM32_PPRE2_DIV1 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_MCOPRE STM32_MCOPRE_DIV1 -#define STM32_RTCSEL STM32_RTCSEL_LSE -#define STM32_RTCPRE STM32_RTCPRE_DIV2 -#define STM32_VOS STM32_VOS_1P8 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32L1xx/SPI/readme.txt b/testhal/STM32L1xx/SPI/readme.txt deleted file mode 100644 index 2ce870851..000000000 --- a/testhal/STM32L1xx/SPI/readme.txt +++ /dev/null @@ -1,31 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - SPI driver demo for STM32L1xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32L-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32L1xx SPI driver. - -** Board Setup ** - -- Remove the LCD module. -- Connect PB14 and PB15 together for SPI loop-back. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32L1xx/UART/.cproject b/testhal/STM32L1xx/UART/.cproject deleted file mode 100644 index dc7b9ec94..000000000 --- a/testhal/STM32L1xx/UART/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32L1xx/UART/.project b/testhal/STM32L1xx/UART/.project deleted file mode 100644 index ac58d7107..000000000 --- a/testhal/STM32L1xx/UART/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32L1xx-UART - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/boards/ST_STM32L_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32L1xx/UART/Makefile b/testhal/STM32L1xx/UART/Makefile deleted file mode 100644 index 0d3a8e2b2..000000000 --- a/testhal/STM32L1xx/UART/Makefile +++ /dev/null @@ -1,207 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -include $(CHIBIOS)/boards/ST_STM32L_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32L1xx/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32L1xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32L152xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/STM32L1xx/UART/chconf.h b/testhal/STM32L1xx/UART/chconf.h deleted file mode 100644 index 2e6fcc6ee..000000000 --- a/testhal/STM32L1xx/UART/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK TRUE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS TRUE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE TRUE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32L1xx/UART/halconf.h b/testhal/STM32L1xx/UART/halconf.h deleted file mode 100644 index 520e71b0a..000000000 --- a/testhal/STM32L1xx/UART/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART TRUE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM32L1xx/UART/main.c b/testhal/STM32L1xx/UART/main.c deleted file mode 100644 index 01a8c8cd9..000000000 --- a/testhal/STM32L1xx/UART/main.c +++ /dev/null @@ -1,144 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static VirtualTimer vt1, vt2; - -static void restart(void *p) { - - (void)p; - - chSysLockFromIsr(); - uartStartSendI(&UARTD1, 14, "Hello World!\r\n"); - chSysUnlockFromIsr(); -} - -static void ledoff(void *p) { - - (void)p; - palClearPad(GPIOB, GPIOB_LED4); -} - -/* - * This callback is invoked when a transmission buffer has been completely - * read by the driver. - */ -static void txend1(UARTDriver *uartp) { - - (void)uartp; - palSetPad(GPIOB, GPIOB_LED4); -} - -/* - * This callback is invoked when a transmission has physically completed. - */ -static void txend2(UARTDriver *uartp) { - - (void)uartp; - palClearPad(GPIOB, GPIOB_LED4); - chSysLockFromIsr(); - if (chVTIsArmedI(&vt1)) - chVTResetI(&vt1); - chVTSetI(&vt1, MS2ST(5000), restart, NULL); - chSysUnlockFromIsr(); -} - -/* - * This callback is invoked on a receive error, the errors mask is passed - * as parameter. - */ -static void rxerr(UARTDriver *uartp, uartflags_t e) { - - (void)uartp; - (void)e; -} - -/* - * This callback is invoked when a character is received but the application - * was not ready to receive it, the character is passed as parameter. - */ -static void rxchar(UARTDriver *uartp, uint16_t c) { - - (void)uartp; - (void)c; - /* Flashing the LED each time a character is received.*/ - palSetPad(GPIOB, GPIOB_LED4); - chSysLockFromIsr(); - if (chVTIsArmedI(&vt2)) - chVTResetI(&vt2); - chVTSetI(&vt2, MS2ST(200), ledoff, NULL); - chSysUnlockFromIsr(); -} - -/* - * This callback is invoked when a receive buffer has been completely written. - */ -static void rxend(UARTDriver *uartp) { - - (void)uartp; -} - -/* - * UART driver configuration structure. - */ -static UARTConfig uart_cfg_1 = { - txend1, - txend2, - rxend, - rxchar, - rxerr, - 38400, - 0, - USART_CR2_LINEN, - 0 -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the serial driver 1, PA9 and PA10 are routed to USART1. - */ - uartStart(&UARTD1, &uart_cfg_1); - palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(7)); - palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(7)); - - /* - * Starts the transmission, it will be handled entirely in background. - */ - uartStartSend(&UARTD1, 13, "Starting...\r\n"); - - /* - * Normal main() thread activity, in this demo it does nothing. - */ - while (TRUE) { - chThdSleepMilliseconds(500); - } -} diff --git a/testhal/STM32L1xx/UART/mcuconf.h b/testhal/STM32L1xx/UART/mcuconf.h deleted file mode 100644 index ee338ce96..000000000 --- a/testhal/STM32L1xx/UART/mcuconf.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM32L1xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32L1xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED TRUE -#define STM32_ADC_CLOCK_ENABLED TRUE -#define STM32_USB_CLOCK_ENABLED TRUE -#define STM32_MSIRANGE STM32_MSIRANGE_2M -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI -#define STM32_PLLMUL_VALUE 6 -#define STM32_PLLDIV_VALUE 3 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV1 -#define STM32_PPRE2 STM32_PPRE2_DIV1 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_MCOPRE STM32_MCOPRE_DIV1 -#define STM32_RTCSEL STM32_RTCSEL_LSE -#define STM32_RTCPRE STM32_RTCPRE_DIV2 -#define STM32_VOS STM32_VOS_1P8 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C1_DMA_ERROR_HOOK() chSysHalt() -#define STM32_I2C_I2C2_DMA_ERROR_HOOK() chSysHalt() - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 TRUE -#define STM32_UART_USE_USART2 TRUE -#define STM32_UART_USE_USART3 TRUE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/testhal/STM32L1xx/UART/readme.txt b/testhal/STM32L1xx/UART/readme.txt deleted file mode 100644 index 5f3edb851..000000000 --- a/testhal/STM32L1xx/UART/readme.txt +++ /dev/null @@ -1,32 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - UART driver demo for STM32L1xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32L-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32L1xx UART driver. - -** Board Setup ** - -- Remove the LCD module. -- Connect an RS232 transceiver to pins PA9(TX) and PA10(RX). -- Connect a terminal emulator to the transceiver (38400-N-8-1). - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM8S/SPI/ChibiOS-RT.stw b/testhal/STM8S/SPI/ChibiOS-RT.stw deleted file mode 100644 index a6630271a..000000000 --- a/testhal/STM8S/SPI/ChibiOS-RT.stw +++ /dev/null @@ -1,16 +0,0 @@ -; STMicroelectronics Workspace file - -[Version] -Keyword=ST7Workspace-V0.7 - -[Project0] -Filename=cosmic\cosmic.stp -Dependencies= - -[Project1] -Filename=raisonance\raisonance.stp -Dependencies= -[Options] -ActiveProject=cosmic -ActiveConfig=Release -AddSortedElements=0 diff --git a/testhal/STM8S/SPI/cosmic/cosmic.stp b/testhal/STM8S/SPI/cosmic/cosmic.stp deleted file mode 100644 index f45146b03..000000000 --- a/testhal/STM8S/SPI/cosmic/cosmic.stp +++ /dev/null @@ -1,1947 +0,0 @@ -; STMicroelectronics Project file - -[Version] -Keyword=ST7Project -Number=1.3 - -[Project] -Name=cosmic -Toolset=STM8 Cosmic - -[Config] -0=Config.0 -1=Config.1 - -[Config.0] -ConfigName=Debug -Target=$(ProjectSFile).elf -OutputFolder=Debug -Debug=$(TargetFName) - -[Config.1] -ConfigName=Release -Target=$(ProjectSFile).elf -OutputFolder=Release -Debug=$(TargetFName) - -[Root] -ElemType=Project -PathName=cosmic -Child=Root.Source Files -Config.0=Root.Config.0 -Config.1=Root.Config.1 - -[Root.Config.0] -Settings.0.0=Root.Config.0.Settings.0 -Settings.0.1=Root.Config.0.Settings.1 -Settings.0.2=Root.Config.0.Settings.2 -Settings.0.3=Root.Config.0.Settings.3 -Settings.0.4=Root.Config.0.Settings.4 -Settings.0.5=Root.Config.0.Settings.5 -Settings.0.6=Root.Config.0.Settings.6 -Settings.0.7=Root.Config.0.Settings.7 -Settings.0.8=Root.Config.0.Settings.8 - -[Root.Config.1] -Settings.1.0=Root.Config.1.Settings.0 -Settings.1.1=Root.Config.1.Settings.1 -Settings.1.2=Root.Config.1.Settings.2 -Settings.1.3=Root.Config.1.Settings.3 -Settings.1.4=Root.Config.1.Settings.4 -Settings.1.5=Root.Config.1.Settings.5 -Settings.1.6=Root.Config.1.Settings.6 -Settings.1.7=Root.Config.1.Settings.7 -Settings.1.8=Root.Config.1.Settings.8 - -[Root.Config.0.Settings.0] -String.6.0=2010,6,3,15,59,36 -String.100.0=ST Assembler Linker -String.100.1=ST7 Cosmic -String.100.2=STM8 Cosmic -String.100.3=ST7 Metrowerks V1.1 -String.100.4=Raisonance -String.101.0=STM8 Cosmic -String.102.0=C:\Programmi\COSMIC\CXSTM8_32K -String.103.0= -String.104.0=Hstm8 -String.105.0=Lib -String.106.0=Debug -String.107.0=$(ProjectSFile).elf -Int.108=0 - -[Root.Config.0.Settings.1] -String.6.0=2010,5,25,14,45,56 -String.100.0=$(TargetFName) -String.101.0= -String.102.0= -String.103.0=.\;..\..\..\..\os\kernel\src;..\..\..\..\os\kernel\include;..\..\..\..\os\ports\cosmic\stm8;..\..\..\..\boards\st_stm8s_discovery;..\..\..\..\os\hal\platforms\stm8s;..\..\..\..\os\hal\include;..\..\..\..\os\hal\src;..\..\..\test;..\demo; - -[Root.Config.0.Settings.2] -String.2.0= -String.6.0=2010,5,25,14,45,56 -String.100.0=STM8S105C6 - -[Root.Config.0.Settings.3] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +warn -customDebCompat -customOpt-no -customC-pp -customLst -l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,26,17,30,51 - -[Root.Config.0.Settings.4] -String.2.0=Assembling $(InputFile)... -String.3.0=castm8 -xx -l $(ToolsetIncOpts) -o$(IntermPath)$(InputName).$(ObjectExt) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,5,25,14,45,56 - -[Root.Config.0.Settings.5] -String.2.0=Running Pre-Link step -String.6.0=2010,5,25,14,45,56 -String.8.0= - -[Root.Config.0.Settings.6] -String.2.0=Running Linker -String.3.0=clnk $(ToolsetLibOpts) -o $(OutputPath)$(TargetSName).sm8 -fakeInteger -fakeOutFile$(ProjectSFile).elf -fakeRunConv -fakeStartupcrtsi0.sm8 -fakeSemiAutoGen -fakeVectFilevectors.c -fakeVectAddr0x8000 -customMapFile -customMapFile-m$(OutputPath)$(TargetSName).map -customMapAddress -customCfgFile$(OutputPath)$(TargetSName).lkf -String.3.1=cvdwarf $(OutputPath)$(TargetSName).sm8 -String.4.0=$(OutputPath)$(TargetFName) -String.5.0= -String.6.0=2010,6,4,10,29,4 -String.100.0= -String.101.0=crtsi.st7 -String.102.0=+seg .const -b 0x8080 -m 0x7f80 -n .const -it -String.102.1=+seg .text -a .const -n .text -String.102.2=+seg .eeprom -b 0x4000 -m 0x400 -n .eeprom -String.102.3=+seg .bsct -b 0x0 -m 0x100 -n .bsct -String.102.4=+seg .ubsct -a .bsct -n .ubsct -String.102.5=+seg .bit -a .ubsct -n .bit -id -String.102.6=+seg .share -a .bit -n .share -is -String.102.7=+seg .data -b 0x100 -m 0x700 -n .data -String.102.8=+seg .bss -a .data -n .bss -String.103.0=Code,Constants[0x8080-0xffff]=.const,.text -String.103.1=Eeprom[0x4000-0x43ff]=.eeprom -String.103.2=Zero Page[0x0-0xff]=.bsct,.ubsct,.bit,.share -String.103.3=Ram[0x100-0x7ff]=.data,.bss -String.104.0=0x7ff -String.105.0=libisl0.sm8;libm0.sm8 -Int.0=0 -Int.1=0 - -[Root.Config.0.Settings.7] -String.2.0=Running Post-Build step -String.3.0=chex -o $(OutputPath)$(TargetSName).s19 $(OutputPath)$(TargetSName).sm8 -String.6.0=2010,5,25,14,45,56 - -[Root.Config.0.Settings.8] -String.2.0=Performing Custom Build on $(InputFile) -String.6.0=2010,5,25,14,45,56 - -[Root.Config.1.Settings.0] -String.6.0=2010,6,3,15,59,36 -String.100.0=ST Assembler Linker -String.100.1=ST7 Cosmic -String.100.2=STM8 Cosmic -String.100.3=ST7 Metrowerks V1.1 -String.100.4=Raisonance -String.101.0=STM8 Cosmic -String.102.0=C:\Programmi\COSMIC\CXSTM8_32K -String.103.0= -String.104.0=Hstm8 -String.105.0=Lib -String.106.0=Release -String.107.0=$(ProjectSFile).elf -Int.108=0 - -[Root.Config.1.Settings.1] -String.6.0=2010,5,25,14,45,56 -String.100.0=$(TargetFName) -String.101.0= -String.102.0= -String.103.0=.\;..\..\..\..\os\kernel\src;..\..\..\..\os\kernel\include;..\..\..\..\os\ports\cosmic\stm8;..\..\..\..\boards\st_stm8s_discovery;..\..\..\..\os\hal\platforms\stm8s;..\..\..\..\os\hal\include;..\..\..\..\os\hal\src;..\..\..\test;..\demo; - -[Root.Config.1.Settings.2] -String.2.0= -String.6.0=2010,5,25,14,45,56 -String.100.0=STM8S105C6 - -[Root.Config.1.Settings.3] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 -customC-pp -customLst-l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 - -[Root.Config.1.Settings.4] -String.2.0=Assembling $(InputFile)... -String.3.0=castm8 -l $(ToolsetIncOpts) -o$(IntermPath)$(InputName).$(ObjectExt) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,2,8,54,4 - -[Root.Config.1.Settings.5] -String.2.0=Running Pre-Link step -String.6.0=2010,5,25,14,45,56 -String.8.0= - -[Root.Config.1.Settings.6] -String.2.0=Running Linker -String.3.0=clnk $(ToolsetLibOpts) -o $(OutputPath)$(TargetSName).sm8 -fakeInteger -fakeOutFile$(ProjectSFile).elf -fakeRunConv -fakeStartupcrtsi0.sm8 -fakeSemiAutoGen -fakeVectFilevectors.c -fakeVectAddr0x8000 -customMapFile -customMapFile-m$(OutputPath)$(TargetSName).map -customMapAddress -customCfgFile$(OutputPath)$(TargetSName).lkf -String.3.1=cvdwarf $(OutputPath)$(TargetSName).sm8 -String.4.0=$(OutputPath)$(TargetFName) -String.5.0= -String.6.0=2010,6,5,11,53,48 -String.100.0= -String.101.0=crtsi.st7 -String.102.0=+seg .const -b 0x8080 -m 0x7f80 -n .const -it -String.102.1=+seg .text -a .const -n .text -String.102.2=+seg .eeprom -b 0x4000 -m 0x400 -n .eeprom -String.102.3=+seg .bsct -b 0x0 -m 0x100 -n .bsct -String.102.4=+seg .ubsct -a .bsct -n .ubsct -String.102.5=+seg .bit -a .ubsct -n .bit -id -String.102.6=+seg .share -a .bit -n .share -is -String.102.7=+seg .data -b 0x100 -m 0x700 -n .data -String.102.8=+seg .bss -a .data -n .bss -String.103.0=Code,Constants[0x8080-0xffff]=.const,.text -String.103.1=Eeprom[0x4000-0x43ff]=.eeprom -String.103.2=Zero Page[0x0-0xff]=.bsct,.ubsct,.bit,.share -String.103.3=Ram[0x100-0x7ff]=.data,.bss -String.104.0=0x7ff -String.105.0=libisl0.sm8;libm0.sm8 -Int.0=0 -Int.1=0 - -[Root.Config.1.Settings.7] -String.2.0=Running Post-Build step -String.3.0=chex -o $(OutputPath)$(TargetSName).s19 $(OutputPath)$(TargetSName).sm8 -String.6.0=2010,5,25,14,45,56 - -[Root.Config.1.Settings.8] -String.2.0=Performing Custom Build on $(InputFile) -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files] -ElemType=Folder -PathName=Source Files -Child=Root.Source Files...\demo\main.c -Next=Root.Include Files -Config.0=Root.Source Files.Config.0 -Config.1=Root.Source Files.Config.1 - -[Root.Source Files.Config.0] -Settings.0.0=Root.Source Files.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Config.0.Settings.2 -Settings.0.3=Root.Source Files.Config.0.Settings.3 - -[Root.Source Files.Config.1] -Settings.1.0=Root.Source Files.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Config.1.Settings.2 -Settings.1.3=Root.Source Files.Config.1.Settings.3 - -[Root.Source Files.Config.0.Settings.0] -String.6.0=2010,5,25,14,45,56 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Config.0.Settings.1] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +warn +modsl0 -customDebCompat -customOpt-no -customC-pp -customLst -l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 - -[Root.Source Files.Config.0.Settings.2] -String.2.0=Assembling $(InputFile)... -String.3.0=castm8 -xx -l $(ToolsetIncOpts) -o$(IntermPath)$(InputName).$(ObjectExt) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Config.0.Settings.3] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Config.1.Settings.0] -String.6.0=2010,5,25,14,45,56 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Config.1.Settings.1] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 -customC-pp -customLst-l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 - -[Root.Source Files.Config.1.Settings.2] -String.2.0=Assembling $(InputFile)... -String.3.0=castm8 -l $(ToolsetIncOpts) -o$(IntermPath)$(InputName).$(ObjectExt) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,2,8,54,4 - -[Root.Source Files.Config.1.Settings.3] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files...\demo\main.c] -ElemType=File -PathName=..\demo\main.c -Next=Root.Source Files.vectors.c - -[Root.Source Files.vectors.c] -ElemType=File -PathName=vectors.c -Next=Root.Source Files.Source Files\board - -[Root.Source Files.Source Files\board] -ElemType=Folder -PathName=Source Files\board -Child=Root.Source Files.Source Files\board...\..\..\..\boards\st_stm8s_discovery\board.c -Next=Root.Source Files.Source Files\os -Config.0=Root.Source Files.Source Files\board.Config.0 -Config.1=Root.Source Files.Source Files\board.Config.1 - -[Root.Source Files.Source Files\board.Config.0] -Settings.0.0=Root.Source Files.Source Files\board.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\board.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\board.Config.0.Settings.2 -Settings.0.3=Root.Source Files.Source Files\board.Config.0.Settings.3 - -[Root.Source Files.Source Files\board.Config.1] -Settings.1.0=Root.Source Files.Source Files\board.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\board.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\board.Config.1.Settings.2 -Settings.1.3=Root.Source Files.Source Files\board.Config.1.Settings.3 - -[Root.Source Files.Source Files\board.Config.0.Settings.0] -String.6.0=2010,6,3,14,55,16 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\board.Config.0.Settings.1] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +warn +modsl0 -customDebCompat -customOpt-no -customC-pp -customLst -l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 - -[Root.Source Files.Source Files\board.Config.0.Settings.2] -String.2.0=Assembling $(InputFile)... -String.3.0=castm8 -xx -l $(ToolsetIncOpts) -o$(IntermPath)$(InputName).$(ObjectExt) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\board.Config.0.Settings.3] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\board.Config.1.Settings.0] -String.6.0=2010,6,3,14,55,16 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\board.Config.1.Settings.1] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +modsl0 -customC-pp -customLst-l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 - -[Root.Source Files.Source Files\board.Config.1.Settings.2] -String.2.0=Assembling $(InputFile)... -String.3.0=castm8 -l $(ToolsetIncOpts) -o$(IntermPath)$(InputName).$(ObjectExt) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,2,8,54,4 - -[Root.Source Files.Source Files\board.Config.1.Settings.3] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\board...\..\..\..\boards\st_stm8s_discovery\board.c] -ElemType=File -PathName=..\..\..\..\boards\st_stm8s_discovery\board.c - -[Root.Source Files.Source Files\os] -ElemType=Folder -PathName=Source Files\os -Child=Root.Source Files.Source Files\os.Source Files\os\hal - -[Root.Source Files.Source Files\os.Source Files\os\hal] -ElemType=Folder -PathName=Source Files\os\hal -Child=Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\adc.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel -Config.0=Root.Source Files.Source Files\os.Source Files\os\hal.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\hal.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\hal.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\hal.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\hal.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\hal.Config.0.Settings.2 -Settings.0.3=Root.Source Files.Source Files\os.Source Files\os\hal.Config.0.Settings.3 - -[Root.Source Files.Source Files\os.Source Files\os\hal.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\hal.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\hal.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\hal.Config.1.Settings.2 -Settings.1.3=Root.Source Files.Source Files\os.Source Files\os\hal.Config.1.Settings.3 - -[Root.Source Files.Source Files\os.Source Files\os\hal.Config.0.Settings.0] -String.6.0=2010,6,3,14,55,16 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\hal.Config.0.Settings.1] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +warn +modsl0 -customDebCompat -customOpt-no -customC-pp -customLst -l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 - -[Root.Source Files.Source Files\os.Source Files\os\hal.Config.0.Settings.2] -String.2.0=Assembling $(InputFile)... -String.3.0=castm8 -xx -l $(ToolsetIncOpts) -o$(IntermPath)$(InputName).$(ObjectExt) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\hal.Config.0.Settings.3] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\hal.Config.1.Settings.0] -String.6.0=2010,6,3,14,55,16 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\hal.Config.1.Settings.1] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +modsl0 -customC-pp -customLst-l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 - -[Root.Source Files.Source Files\os.Source Files\os\hal.Config.1.Settings.2] -String.2.0=Assembling $(InputFile)... -String.3.0=castm8 -l $(ToolsetIncOpts) -o$(IntermPath)$(InputName).$(ObjectExt) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,2,8,54,4 - -[Root.Source Files.Source Files\os.Source Files\os\hal.Config.1.Settings.3] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\adc.c] -ElemType=File -PathName=..\..\..\..\os\hal\src\adc.c -Next=Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\can.c - -[Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\can.c] -ElemType=File -PathName=..\..\..\..\os\hal\src\can.c -Next=Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\hal.c - -[Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\hal.c] -ElemType=File -PathName=..\..\..\..\os\hal\src\hal.c -Next=Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\mac.c - -[Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\mac.c] -ElemType=File -PathName=..\..\..\..\os\hal\src\mac.c -Next=Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\mmc_spi.c - -[Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\mmc_spi.c] -ElemType=File -PathName=..\..\..\..\os\hal\src\mmc_spi.c -Next=Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\pal.c - -[Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\pal.c] -ElemType=File -PathName=..\..\..\..\os\hal\src\pal.c -Next=Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\pwm.c - -[Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\pwm.c] -ElemType=File -PathName=..\..\..\..\os\hal\src\pwm.c -Next=Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\serial.c - -[Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\serial.c] -ElemType=File -PathName=..\..\..\..\os\hal\src\serial.c -Next=Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\spi.c - -[Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\spi.c] -ElemType=File -PathName=..\..\..\..\os\hal\src\spi.c -Next=Root.Source Files.Source Files\os.Source Files\os\hal.Source Files\os\hal\stm8s - -[Root.Source Files.Source Files\os.Source Files\os\hal.Source Files\os\hal\stm8s] -ElemType=Folder -PathName=Source Files\os\hal\stm8s -Child=Root.Source Files.Source Files\os.Source Files\os\hal.Source Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\spi_lld.c - -[Root.Source Files.Source Files\os.Source Files\os\hal.Source Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\spi_lld.c] -ElemType=File -PathName=..\..\..\..\os\hal\platforms\stm8s\spi_lld.c -Next=Root.Source Files.Source Files\os.Source Files\os\hal.Source Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\hal_lld.c - -[Root.Source Files.Source Files\os.Source Files\os\hal.Source Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\hal_lld.c] -ElemType=File -PathName=..\..\..\..\os\hal\platforms\stm8s\hal_lld.c -Next=Root.Source Files.Source Files\os.Source Files\os\hal.Source Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\pal_lld.c - -[Root.Source Files.Source Files\os.Source Files\os\hal.Source Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\pal_lld.c] -ElemType=File -PathName=..\..\..\..\os\hal\platforms\stm8s\pal_lld.c -Next=Root.Source Files.Source Files\os.Source Files\os\hal.Source Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\serial_lld.c - -[Root.Source Files.Source Files\os.Source Files\os\hal.Source Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\serial_lld.c] -ElemType=File -PathName=..\..\..\..\os\hal\platforms\stm8s\serial_lld.c - -[Root.Source Files.Source Files\os.Source Files\os\kernel] -ElemType=Folder -PathName=Source Files\os\kernel -Child=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c -Next=Root.Source Files.Source Files\os.Source Files\os\port - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chcond.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c.Config.0.Settings.0] -String.6.0=2010,6,3,14,55,16 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +warn +modsl0 -customDebCompat -customOpt-no -customC-pp -customLst -l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c.Config.1.Settings.0] -String.6.0=2010,6,3,14,55,16 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +modsl0 -customC-pp -customLst-l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chdebug.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdynamic.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c.Config.0.Settings.0] -String.6.0=2010,6,3,14,55,16 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +warn +modsl0 -customDebCompat -customOpt-no -customC-pp -customLst -l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c.Config.1.Settings.0] -String.6.0=2010,6,3,14,55,16 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +modsl0 -customC-pp -customLst-l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdynamic.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chdynamic.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chevents.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c.Config.0.Settings.0] -String.6.0=2010,6,3,14,55,16 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +warn +modsl0 -customDebCompat -customOpt-no -customC-pp -customLst -l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c.Config.1.Settings.0] -String.6.0=2010,6,3,14,55,16 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +modsl0 -customC-pp -customLst-l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chheap.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c.Config.0.Settings.0] -String.6.0=2010,6,3,11,20,12 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +warn +mods0 -customDebCompat -customOpt-no -customC-pp -customLst -l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,54,38 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c.Config.1.Settings.0] -String.6.0=2010,6,3,11,20,12 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +mods0 -customC-pp -customLst-l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chlists.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c.Config.0.Settings.0] -String.6.0=2010,6,3,14,55,16 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +warn +modsl0 -customDebCompat -customOpt-no -customC-pp -customLst -l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c.Config.1.Settings.0] -String.6.0=2010,6,3,14,55,16 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +modsl0 -customC-pp -customLst-l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chmboxes.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c.Config.0.Settings.0] -String.6.0=2010,6,3,14,55,16 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +warn +modsl0 -customDebCompat -customOpt-no -customC-pp -customLst -l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c.Config.1.Settings.0] -String.6.0=2010,6,3,14,55,16 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +modsl0 -customC-pp -customLst-l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chmemcore.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c.Config.0.Settings.0] -String.6.0=2010,6,3,14,55,16 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +warn +modsl0 -customDebCompat -customOpt-no -customC-pp -customLst -l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c.Config.1.Settings.0] -String.6.0=2010,6,3,14,55,16 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +modsl0 -customC-pp -customLst-l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chmempools.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c.Config.0.Settings.0] -String.6.0=2010,6,3,14,55,16 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +warn +modsl0 -customDebCompat -customOpt-no -customC-pp -customLst -l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c.Config.1.Settings.0] -String.6.0=2010,6,3,14,55,16 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +modsl0 -customC-pp -customLst-l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chmsg.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c.Config.0.Settings.0] -String.6.0=2010,6,3,14,55,16 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +warn +modsl0 -customDebCompat -customOpt-no -customC-pp -customLst -l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c.Config.1.Settings.0] -String.6.0=2010,6,3,14,55,16 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +modsl0 -customC-pp -customLst-l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chmtx.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c.Config.0.Settings.0] -String.6.0=2010,6,3,14,55,16 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +warn +modsl0 -customDebCompat -customOpt-no -customC-pp -customLst -l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c.Config.1.Settings.0] -String.6.0=2010,6,3,14,55,16 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +modsl0 -customC-pp -customLst-l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chqueues.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c.Config.0.Settings.0] -String.6.0=2010,6,3,14,55,16 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +warn +modsl0 -customDebCompat -customOpt-no -customC-pp -customLst -l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c.Config.1.Settings.0] -String.6.0=2010,6,3,14,55,16 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +modsl0 -customC-pp -customLst-l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chregistry.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c.Config.0.Settings.0] -String.6.0=2010,6,3,14,55,16 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +warn +modsl0 -customDebCompat -customOpt-no -customC-pp -customLst -l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c.Config.1.Settings.0] -String.6.0=2010,6,3,14,55,16 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +modsl0 -customC-pp -customLst-l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chschd.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c.Config.0.Settings.0] -String.6.0=2010,6,3,14,55,17 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +warn +modsl0 -customDebCompat -customOpt-no -customC-pp -customLst -l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c.Config.1.Settings.0] -String.6.0=2010,6,3,14,55,17 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +modsl0 -customC-pp -customLst-l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chsem.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c.Config.0.Settings.0] -String.6.0=2010,6,3,14,55,17 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +warn +modsl0 -customDebCompat -customOpt-no -customC-pp -customLst -l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c.Config.1.Settings.0] -String.6.0=2010,6,3,14,55,17 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +modsl0 -customC-pp -customLst-l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chsys.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c.Config.0.Settings.0] -String.6.0=2010,6,3,14,55,17 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +warn +modsl0 -customDebCompat -customOpt-no -customC-pp -customLst -l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c.Config.1.Settings.0] -String.6.0=2010,6,3,14,55,17 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +modsl0 -customC-pp -customLst-l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chthreads.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c.Config.0.Settings.0] -String.6.0=2010,6,3,14,55,17 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +warn +modsl0 -customDebCompat -customOpt-no -customC-pp -customLst -l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c.Config.1.Settings.0] -String.6.0=2010,6,3,14,55,17 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +modsl0 -customC-pp -customLst-l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chvt.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c.Config.0.Settings.0] -String.6.0=2010,6,2,17,48,49 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +warn +mods0 -customDebCompat -customOpt-no -customC-pp -customLst -l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,54,38 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c.Config.1.Settings.0] -String.6.0=2010,6,2,17,48,49 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +mods0 -customC-pp -customLst-l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\port] -ElemType=Folder -PathName=Source Files\os\port -Child=Root.Source Files.Source Files\os.Source Files\os\port...\..\..\..\os\ports\cosmic\stm8\chcore.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\port.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\port.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\port.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\port.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\port.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\port.Config.0.Settings.2 -Settings.0.3=Root.Source Files.Source Files\os.Source Files\os\port.Config.0.Settings.3 - -[Root.Source Files.Source Files\os.Source Files\os\port.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\port.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\port.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\port.Config.1.Settings.2 -Settings.1.3=Root.Source Files.Source Files\os.Source Files\os\port.Config.1.Settings.3 - -[Root.Source Files.Source Files\os.Source Files\os\port.Config.0.Settings.0] -String.6.0=2010,6,3,14,55,17 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\port.Config.0.Settings.1] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +warn +modsl0 -customDebCompat -customOpt-no -customC-pp -customLst -l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 - -[Root.Source Files.Source Files\os.Source Files\os\port.Config.0.Settings.2] -String.2.0=Assembling $(InputFile)... -String.3.0=castm8 -xx -l $(ToolsetIncOpts) -o$(IntermPath)$(InputName).$(ObjectExt) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\port.Config.0.Settings.3] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\port.Config.1.Settings.0] -String.6.0=2010,6,3,14,55,17 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\port.Config.1.Settings.1] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +modsl0 -customC-pp -customLst-l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 - -[Root.Source Files.Source Files\os.Source Files\os\port.Config.1.Settings.2] -String.2.0=Assembling $(InputFile)... -String.3.0=castm8 -l $(ToolsetIncOpts) -o$(IntermPath)$(InputName).$(ObjectExt) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,2,8,54,4 - -[Root.Source Files.Source Files\os.Source Files\os\port.Config.1.Settings.3] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Source Files.Source Files\os.Source Files\os\port...\..\..\..\os\ports\cosmic\stm8\chcore.c] -ElemType=File -PathName=..\..\..\..\os\ports\cosmic\stm8\chcore.c - -[Root.Include Files] -ElemType=Folder -PathName=Include Files -Child=Root.Include Files...\demo\halconf.h -Config.0=Root.Include Files.Config.0 -Config.1=Root.Include Files.Config.1 - -[Root.Include Files.Config.0] -Settings.0.0=Root.Include Files.Config.0.Settings.0 -Settings.0.1=Root.Include Files.Config.0.Settings.1 -Settings.0.2=Root.Include Files.Config.0.Settings.2 -Settings.0.3=Root.Include Files.Config.0.Settings.3 - -[Root.Include Files.Config.1] -Settings.1.0=Root.Include Files.Config.1.Settings.0 -Settings.1.1=Root.Include Files.Config.1.Settings.1 -Settings.1.2=Root.Include Files.Config.1.Settings.2 -Settings.1.3=Root.Include Files.Config.1.Settings.3 - -[Root.Include Files.Config.0.Settings.0] -String.6.0=2010,5,25,14,45,56 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Include Files.Config.0.Settings.1] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +warn +modsl0 -customDebCompat -customOpt-no -customC-pp -customLst -l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 - -[Root.Include Files.Config.0.Settings.2] -String.2.0=Assembling $(InputFile)... -String.3.0=castm8 -xx -l $(ToolsetIncOpts) -o$(IntermPath)$(InputName).$(ObjectExt) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,5,25,14,45,56 - -[Root.Include Files.Config.0.Settings.3] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Include Files.Config.1.Settings.0] -String.6.0=2010,5,25,14,45,56 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Include Files.Config.1.Settings.1] -String.2.0=Compiling $(InputFile)... -String.3.0=cxstm8 +modsl0 -customC-pp -customLst-l -i..\demo -i..\..\..\test -i..\..\..\..\os\hal\include -i..\..\..\..\os\hal\platforms\stm8s -i..\..\..\..\boards\st_stm8s_discovery -i..\..\..\..\os\ports\cosmic\stm8 -i..\..\..\..\os\kernel\include $(ToolsetIncOpts) -cl$(IntermPath) -co$(IntermPath) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,5,11,53,48 - -[Root.Include Files.Config.1.Settings.2] -String.2.0=Assembling $(InputFile)... -String.3.0=castm8 -l $(ToolsetIncOpts) -o$(IntermPath)$(InputName).$(ObjectExt) $(InputFile) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).ls -String.6.0=2010,6,2,8,54,4 - -[Root.Include Files.Config.1.Settings.3] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,5,25,14,45,56 - -[Root.Include Files...\demo\halconf.h] -ElemType=File -PathName=..\demo\halconf.h -Next=Root.Include Files...\demo\chconf.h - -[Root.Include Files...\demo\chconf.h] -ElemType=File -PathName=..\demo\chconf.h -Next=Root.Include Files...\demo\mcuconf.h - -[Root.Include Files...\demo\mcuconf.h] -ElemType=File -PathName=..\demo\mcuconf.h -Next=Root.Include Files.Include Files\board - -[Root.Include Files.Include Files\board] -ElemType=Folder -PathName=Include Files\board -Child=Root.Include Files.Include Files\board...\..\..\..\boards\st_stm8s_discovery\board.h -Next=Root.Include Files.Include Files\os - -[Root.Include Files.Include Files\board...\..\..\..\boards\st_stm8s_discovery\board.h] -ElemType=File -PathName=..\..\..\..\boards\st_stm8s_discovery\board.h - -[Root.Include Files.Include Files\os] -ElemType=Folder -PathName=Include Files\os -Child=Root.Include Files.Include Files\os.Include Files\os\hal -Next=Root.Include Files.Include Files\test - -[Root.Include Files.Include Files\os.Include Files\os\hal] -ElemType=Folder -PathName=Include Files\os\hal -Child=Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\adc.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel - -[Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\adc.h] -ElemType=File -PathName=..\..\..\..\os\hal\include\adc.h -Next=Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\can.h - -[Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\can.h] -ElemType=File -PathName=..\..\..\..\os\hal\include\can.h -Next=Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\hal.h - -[Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\hal.h] -ElemType=File -PathName=..\..\..\..\os\hal\include\hal.h -Next=Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\mac.h - -[Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\mac.h] -ElemType=File -PathName=..\..\..\..\os\hal\include\mac.h -Next=Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\mii.h - -[Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\mii.h] -ElemType=File -PathName=..\..\..\..\os\hal\include\mii.h -Next=Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\mmc_spi.h - -[Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\mmc_spi.h] -ElemType=File -PathName=..\..\..\..\os\hal\include\mmc_spi.h -Next=Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\pal.h - -[Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\pal.h] -ElemType=File -PathName=..\..\..\..\os\hal\include\pal.h -Next=Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\pwm.h - -[Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\pwm.h] -ElemType=File -PathName=..\..\..\..\os\hal\include\pwm.h -Next=Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\serial.h - -[Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\serial.h] -ElemType=File -PathName=..\..\..\..\os\hal\include\serial.h -Next=Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\spi.h - -[Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\spi.h] -ElemType=File -PathName=..\..\..\..\os\hal\include\spi.h -Next=Root.Include Files.Include Files\os.Include Files\os\hal.Include Files\os\hal\stm8s - -[Root.Include Files.Include Files\os.Include Files\os\hal.Include Files\os\hal\stm8s] -ElemType=Folder -PathName=Include Files\os\hal\stm8s -Child=Root.Include Files.Include Files\os.Include Files\os\hal.Include Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\spi_lld.h - -[Root.Include Files.Include Files\os.Include Files\os\hal.Include Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\spi_lld.h] -ElemType=File -PathName=..\..\..\..\os\hal\platforms\stm8s\spi_lld.h -Next=Root.Include Files.Include Files\os.Include Files\os\hal.Include Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\hal_lld.h - -[Root.Include Files.Include Files\os.Include Files\os\hal.Include Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\hal_lld.h] -ElemType=File -PathName=..\..\..\..\os\hal\platforms\stm8s\hal_lld.h -Next=Root.Include Files.Include Files\os.Include Files\os\hal.Include Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\pal_lld.h - -[Root.Include Files.Include Files\os.Include Files\os\hal.Include Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\pal_lld.h] -ElemType=File -PathName=..\..\..\..\os\hal\platforms\stm8s\pal_lld.h -Next=Root.Include Files.Include Files\os.Include Files\os\hal.Include Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\serial_lld.h - -[Root.Include Files.Include Files\os.Include Files\os\hal.Include Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\serial_lld.h] -ElemType=File -PathName=..\..\..\..\os\hal\platforms\stm8s\serial_lld.h -Next=Root.Include Files.Include Files\os.Include Files\os\hal.Include Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\stm8s.h - -[Root.Include Files.Include Files\os.Include Files\os\hal.Include Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\stm8s.h] -ElemType=File -PathName=..\..\..\..\os\hal\platforms\stm8s\stm8s.h -Next=Root.Include Files.Include Files\os.Include Files\os\hal.Include Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\stm8s_type.h - -[Root.Include Files.Include Files\os.Include Files\os\hal.Include Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\stm8s_type.h] -ElemType=File -PathName=..\..\..\..\os\hal\platforms\stm8s\stm8s_type.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel] -ElemType=Folder -PathName=Include Files\os\kernel -Child=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\ch.h -Next=Root.Include Files.Include Files\os.Include Files\os\port - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\ch.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\ch.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chcond.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chcond.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chcond.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chdebug.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chdebug.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chdebug.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chdynamic.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chdynamic.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chdynamic.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chevents.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chevents.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chevents.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chheap.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chheap.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chheap.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chinline.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chinline.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chinline.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chioch.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chioch.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chioch.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chlists.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chlists.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chlists.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chmboxes.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chmboxes.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chmboxes.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chmemcore.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chmemcore.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chmemcore.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chmempools.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chmempools.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chmempools.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chmsg.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chmsg.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chmsg.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chmtx.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chmtx.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chmtx.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chqueues.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chqueues.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chqueues.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chregistry.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chregistry.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chregistry.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chschd.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chschd.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chschd.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chsem.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chsem.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chsem.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chstreams.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chstreams.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chstreams.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chsys.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chsys.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chsys.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chthreads.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chthreads.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chthreads.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chvt.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chvt.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chvt.h - -[Root.Include Files.Include Files\os.Include Files\os\port] -ElemType=Folder -PathName=Include Files\os\port -Child=Root.Include Files.Include Files\os.Include Files\os\port...\..\..\..\os\ports\cosmic\stm8\chcore.h - -[Root.Include Files.Include Files\os.Include Files\os\port...\..\..\..\os\ports\cosmic\stm8\chcore.h] -ElemType=File -PathName=..\..\..\..\os\ports\cosmic\stm8\chcore.h -Next=Root.Include Files.Include Files\os.Include Files\os\port...\..\..\..\os\ports\cosmic\stm8\chtypes.h - -[Root.Include Files.Include Files\os.Include Files\os\port...\..\..\..\os\ports\cosmic\stm8\chtypes.h] -ElemType=File -PathName=..\..\..\..\os\ports\cosmic\stm8\chtypes.h - -[Root.Include Files.Include Files\test] -ElemType=Folder -PathName=Include Files\test \ No newline at end of file diff --git a/testhal/STM8S/SPI/cosmic/vectors.c b/testhal/STM8S/SPI/cosmic/vectors.c deleted file mode 100644 index b6b57dc1d..000000000 --- a/testhal/STM8S/SPI/cosmic/vectors.c +++ /dev/null @@ -1,103 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/** - * @brief Exception handler type. - */ -typedef void @far @interrupt (*interrupt_handler_t)(void); - -/* - * Various external symbols. - */ -void _stext(void); -@far @interrupt void vector10(void); -@far @interrupt void vector13(void); -@far @interrupt void vector17(void); -@far @interrupt void vector18(void); -@far @interrupt void vector20(void); -@far @interrupt void vector21(void); - -/** - * @brief Exception vector type. - */ -typedef struct { - uint8_t ev_instruction; - interrupt_handler_t ev_handler; -} exception_vector_t; - -/** - * @brief Undefined interrupt handler. - * @note It should never be invoked. - */ -@far @interrupt static void vector (void) -{ - return; -} - -/** - * @brief Exceptions table. - */ -exception_vector_t const _vectab[] = { - {0x82, (interrupt_handler_t)_stext}, /* reset */ - {0x82, vector}, /* trap */ - {0x82, vector}, /* vector0 */ - {0x82, vector}, /* vector1 */ - {0x82, vector}, /* vector2 */ - {0x82, vector}, /* vector3 */ - {0x82, vector}, /* vector4 */ - {0x82, vector}, /* vector5 */ - {0x82, vector}, /* vector6 */ - {0x82, vector}, /* vector7 */ - {0x82, vector}, /* vector8 */ - {0x82, vector}, /* vector9 */ -#if HAL_USE_SPI && STM8S_SPI_USE_SPI - {0x82, vector10}, -#else - {0x82, vector}, /* vector10 */ -#endif - {0x82, vector}, /* vector11 */ - {0x82, vector}, /* vector12 */ - {0x82, vector13}, /* vector13 */ - {0x82, vector}, /* vector14 */ - {0x82, vector}, /* vector15 */ - {0x82, vector}, /* vector16 */ -#if HAL_USE_SERIAL && STM8S_SERIAL_USE_UART1 - {0x82, vector17}, /* vector17 */ - {0x82, vector18}, /* vector18 */ -#else - {0x82, vector}, /* vector17 */ - {0x82, vector}, /* vector18 */ -#endif - {0x82, vector}, /* vector19 */ -#if HAL_USE_SERIAL && (STM8S_SERIAL_USE_UART2 || STM8S_SERIAL_USE_UART3) - {0x82, vector20}, /* vector20 */ - {0x82, vector21}, /* vector21 */ -#else - {0x82, vector}, /* vector20 */ - {0x82, vector}, /* vector21 */ -#endif - {0x82, vector}, /* vector22 */ - {0x82, vector}, /* vector23 */ - {0x82, vector}, /* vector24 */ - {0x82, vector}, /* vector25 */ - {0x82, vector}, /* vector26 */ - {0x82, vector}, /* vector27 */ - {0x82, vector}, /* vector28 */ - {0x82, vector}, /* vector29 */ -}; diff --git a/testhal/STM8S/SPI/demo/chconf.h b/testhal/STM8S/SPI/demo/chconf.h deleted file mode 100644 index f943ea80c..000000000 --- a/testhal/STM8S/SPI/demo/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE FALSE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/STM8S/SPI/demo/halconf.h b/testhal/STM8S/SPI/demo/halconf.h deleted file mode 100644 index fdc079aef..000000000 --- a/testhal/STM8S/SPI/demo/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM FALSE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/testhal/STM8S/SPI/demo/main.c b/testhal/STM8S/SPI/demo/main.c deleted file mode 100644 index b1e8b6ed1..000000000 --- a/testhal/STM8S/SPI/demo/main.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * SPI configuration (8MHz, CPHA=0, CPOL=0, MSb first). - */ -static ROMCONST SPIConfig spicfg = { - NULL, - GPIOD, - PD_LD10, - 0 -}; - -/* - * Transmit data. - */ -static ROMCONST uint8_t digits[32] = { - 0x24, 0xAF, 0xE0, 0xA2, 0x2B, 0x32, 0x30, 0xA7, - 0x20, 0x22, 0x21, 0x38, 0x74, 0xA8, 0x70, 0x71, - 0x04, 0x8F, 0xC0, 0x82, 0x0B, 0x12, 0x10, 0x87, - 0x00, 0x02, 0x01, 0x18, 0x54, 0x88, 0x50, 0x51 -}; - -/* - * Receive buffer. - */ -static uint8_t buffer[32]; - -/* - * Application entry point. - */ -void main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * OS initialization. - */ - chSysInit(); - - /* - * Activates the SPI driver 1 using the driver default configuration. - */ - spiStart(&SPID1, &spicfg); - - /* - * Normal main() thread activity. - */ - while (TRUE) { - volatile uint8_t b; - - chThdSleepMilliseconds(1000); - /* Exchanging data, if the pins MISO and MOSI are connected then the - transmitted data is received back into the buffer. On the - STM8S-Discovery board the pins are CN2-9 and CN2-10.*/ - spiSelect(&SPID1); - spiExchange(&SPID1, sizeof(digits), digits, buffer); - /* Polled transfers test.*/ - b = spiPolledExchange(&SPID1, 0x55); - b = spiPolledExchange(&SPID1, 0xAA); - spiUnselect(&SPID1); - } -} diff --git a/testhal/STM8S/SPI/demo/mcuconf.h b/testhal/STM8S/SPI/demo/mcuconf.h deleted file mode 100644 index c09874c9b..000000000 --- a/testhal/STM8S/SPI/demo/mcuconf.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * STM8 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the driver - * is enabled in halconf.h. - */ - -/* - * HAL general settings. - */ -#define STM8S_NO_CLOCK_INIT FALSE -#define STM8S_HSI_ENABLED FALSE -#define STM8S_LSI_ENABLED TRUE -#define STM8S_HSE_ENABLED TRUE -#define STM8S_SYSCLK_SOURCE CLK_SYSSEL_HSE -#define STM8S_HSI_DIVIDER CLK_HSI_DIV1 -#define STM8S_CPU_DIVIDER CLK_CPU_DIV1 - -/* - * SERIAL driver system settings. - */ -#define STM8S_SERIAL_USE_UART1 FALSE -#define STM8S_SERIAL_USE_UART2 TRUE -#define STM8S_SERIAL_USE_UART3 FALSE - -/* - * SPI driver system settings. - */ -#define STM8S_SPI_USE_SPI TRUE -#define STM8S_SPI_ERROR_HOOK(spip) chSysHalt() diff --git a/testhal/STM8S/SPI/raisonance/raisonance.stp b/testhal/STM8S/SPI/raisonance/raisonance.stp deleted file mode 100644 index d9e65a4e0..000000000 --- a/testhal/STM8S/SPI/raisonance/raisonance.stp +++ /dev/null @@ -1,1963 +0,0 @@ -; STMicroelectronics Project file - -[Version] -Keyword=ST7Project -Number=1.3 - -[Project] -Name=raisonance -Toolset=Raisonance - -[Config] -0=Config.0 -1=Config.1 - -[Config.0] -ConfigName=Debug -Target=$(ProjectSFile).elf -OutputFolder=Debug -Debug=$(TargetFName) - -[Config.1] -ConfigName=Release -Target=$(ProjectSFile).elf -OutputFolder=Release -Debug=$(TargetFName) - -[Root] -ElemType=Project -PathName=raisonance -Child=Root.Source Files -Config.0=Root.Config.0 -Config.1=Root.Config.1 - -[Root.Config.0] -Settings.0.0=Root.Config.0.Settings.0 -Settings.0.1=Root.Config.0.Settings.1 -Settings.0.2=Root.Config.0.Settings.2 -Settings.0.3=Root.Config.0.Settings.3 -Settings.0.4=Root.Config.0.Settings.4 -Settings.0.5=Root.Config.0.Settings.5 -Settings.0.6=Root.Config.0.Settings.6 -Settings.0.7=Root.Config.0.Settings.7 -Settings.0.8=Root.Config.0.Settings.8 - -[Root.Config.1] -Settings.1.0=Root.Config.1.Settings.0 -Settings.1.1=Root.Config.1.Settings.1 -Settings.1.2=Root.Config.1.Settings.2 -Settings.1.3=Root.Config.1.Settings.3 -Settings.1.4=Root.Config.1.Settings.4 -Settings.1.5=Root.Config.1.Settings.5 -Settings.1.6=Root.Config.1.Settings.6 -Settings.1.7=Root.Config.1.Settings.7 -Settings.1.8=Root.Config.1.Settings.8 - -[Root.Config.0.Settings.0] -String.6.0=2010,6,4,10,30,46 -String.100.0=ST Assembler Linker -String.100.1=ST7 Cosmic -String.100.2=STM8 Cosmic -String.100.3=ST7 Metrowerks V1.1 -String.100.4=Raisonance -String.101.0=Raisonance -String.102.0=C:\Programmi\Raisonance\Ride -String.103.0=bin -String.104.0=INC\ST7;INC -String.105.0=LIB\ST7 -String.106.0=Debug -String.107.0=$(ProjectSFile).elf -Int.108=0 - -[Root.Config.0.Settings.1] -String.6.0=2010,6,4,10,10,40 -String.100.0=$(TargetFName) -String.101.0= -String.102.0= -String.103.0=.\;..\demo;..\..\..\..\boards\st_stm8s_discovery;..\..\..\..\os\kernel\src;..\..\..\..\os\kernel\include;..\..\..\..\os\hal\include;..\..\..\..\os\hal\platforms\stm8s;..\..\..\..\os\hal\src;..\..\..\test;..\..\..\..\os\ports\rc\stm8; - -[Root.Config.0.Settings.2] -String.2.0= -String.6.0=2010,6,4,10,10,40 -String.100.0=STM8S105C6 - -[Root.Config.0.Settings.3] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DEBUG AUTO -customDebugOpt -CustomOptimOT(0) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB LAOB PIN(..\..\..\test) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\..\..\..\os\ports\RC\stm8) PIN(..\..\..\..\os\kernel\include) PIN(..\demo) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,42,15 - -[Root.Config.0.Settings.4] -String.2.0=Assembling $(InputFile)... -String.3.0=mastm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) QUIET DEBUG NOPR ERRORPRINT MODESTM8 -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,46,5 - -[Root.Config.0.Settings.5] -String.2.0=Running Pre-Link step -String.6.0=2010,6,4,10,10,40 -String.8.0= - -[Root.Config.0.Settings.6] -String.2.0=Running Linker -String.3.0=rlstm8 -P $(ObjectFiles) TO($(OutputPath)$(TargetSName).aof) $(ToolsetLibOpts) -CustomOutFile[$(ProjectSFile).elf] DEBUGLINES DEBUGPUBLICS DEBUGSYMBOLS -CustomRunHexConv -customMapFile -customMapFilePR($(OutputPath)$(TargetSName).map) -String.3.1=omf2elf $(OutputPath)$(TargetSName).aof -String.4.0=$(OutputPath)$(TargetFName) -String.5.0=$(OutputPath)$(ProjectSFile).elf $(OutputPath)$(TargetSName).map -String.6.0=2010,6,4,12,15,0 -String.100.0= DATASTART(0x0) RAMSIZE(0x800) CODESTART(0x8000) CODESIZE(0x8000) STACKTOP(0x800) STACKSIZE(0x100) EEPROMSTART(0x4000) EEPROMSIZE(0x400) -String.101.0= -String.102.0= -Int.0=0 -Int.1=0 - -[Root.Config.0.Settings.7] -String.2.0=Running Post-Build step -String.3.0=omf2hex $(OutputPath)$(TargetSName).aof HEX -String.6.0=2010,6,4,10,10,40 - -[Root.Config.0.Settings.8] -String.2.0=Performing Custom Build on $(InputFile) -String.6.0=2010,6,4,10,10,40 - -[Root.Config.1.Settings.0] -String.6.0=2010,6,4,11,25,50 -String.100.0=ST Assembler Linker -String.100.1=ST7 Cosmic -String.100.2=STM8 Cosmic -String.100.3=ST7 Metrowerks V1.1 -String.100.4=Raisonance -String.101.0=Raisonance -String.102.0=C:\Programmi\Raisonance\Ride -String.103.0=bin -String.104.0=INC\ST7;INC -String.105.0=LIB\ST7 -String.106.0=Release -String.107.0=$(ProjectSFile).elf -Int.108=0 - -[Root.Config.1.Settings.1] -String.6.0=2010,6,4,10,10,40 -String.100.0=$(TargetFName) -String.101.0= -String.102.0= -String.103.0=.\;..\demo;..\..\..\..\boards\st_stm8s_discovery;..\..\..\..\os\kernel\src;..\..\..\..\os\kernel\include;..\..\..\..\os\hal\include;..\..\..\..\os\hal\platforms\stm8s;..\..\..\..\os\hal\src;..\..\..\test;..\..\..\..\os\ports\rc\stm8; - -[Root.Config.1.Settings.2] -String.2.0= -String.6.0=2010,6,4,10,10,40 -String.100.0=STM8S105C6 - -[Root.Config.1.Settings.3] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) AUTO -customSpeedOpt -CustomOptimOT(7,SPEED) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB NOIS CD CO SB LAOB PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\demo) PIN(..\..\..\..\os\kernel\include) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\test) PIN(..\..\..\..\os\ports\rc\stm8) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,22,23 - -[Root.Config.1.Settings.4] -String.2.0=Assembling $(InputFile)... -String.3.0=mastm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) QUIET NOPR ERRORPRINT NOCOND NOLIST NOLISTINCLUDE NOGEN NOSB NOXREF MODESTM8 -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,22,23 - -[Root.Config.1.Settings.5] -String.2.0=Running Pre-Link step -String.6.0=2010,6,4,10,10,40 -String.8.0= - -[Root.Config.1.Settings.6] -String.2.0=Running Linker -String.3.0=rlstm8 -P $(ObjectFiles) TO($(OutputPath)$(TargetSName).aof) $(ToolsetLibOpts) -CustomOutFile[$(ProjectSFile).elf] NODEBUGLINES NODEBUGPUBLICS NODEBUGSYMBOLS -CustomRunHexConv -customMapFile -customMapFilePR($(OutputPath)$(TargetSName).map) -String.3.1=omf2elf $(OutputPath)$(TargetSName).aof -String.4.0=$(OutputPath)$(TargetFName) -String.5.0=$(OutputPath)$(ProjectSFile).elf $(OutputPath)$(TargetSName).map -String.6.0=2010,6,4,12,15,0 -String.100.0= DATASTART(0x0) RAMSIZE(0x800) CODESTART(0x8000) CODESIZE(0x8000) STACKTOP(0x800) STACKSIZE(0x100) EEPROMSTART(0x4000) EEPROMSIZE(0x400) -String.101.0= -String.102.0= -Int.0=0 -Int.1=0 - -[Root.Config.1.Settings.7] -String.2.0=Running Post-Build step -String.3.0=omf2hex $(OutputPath)$(TargetSName).aof HEX -String.6.0=2010,6,4,10,10,40 - -[Root.Config.1.Settings.8] -String.2.0=Performing Custom Build on $(InputFile) -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files] -ElemType=Folder -PathName=Source Files -Child=Root.Source Files...\demo\main.c -Next=Root.Include Files -Config.0=Root.Source Files.Config.0 -Config.1=Root.Source Files.Config.1 - -[Root.Source Files.Config.0] -Settings.0.0=Root.Source Files.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Config.0.Settings.2 -Settings.0.3=Root.Source Files.Config.0.Settings.3 - -[Root.Source Files.Config.1] -Settings.1.0=Root.Source Files.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Config.1.Settings.2 -Settings.1.3=Root.Source Files.Config.1.Settings.3 - -[Root.Source Files.Config.0.Settings.0] -String.6.0=2010,6,4,10,10,40 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Config.0.Settings.1] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DEBUG AUTO -customDebugOpt -CustomOptimOT(0) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB LAOB PIN(..\..\..\test) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\..\..\..\os\ports\RC\stm8) PIN(..\..\..\..\os\kernel\include) PIN(..\demo) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,42,15 - -[Root.Source Files.Config.0.Settings.2] -String.2.0=Assembling $(InputFile)... -String.3.0=mastm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) QUIET DEBUG NOPR ERRORPRINT MODESTM8 -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,46,5 - -[Root.Source Files.Config.0.Settings.3] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Config.1.Settings.0] -String.6.0=2010,6,4,10,10,40 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Config.1.Settings.1] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) AUTO -customSpeedOpt -CustomOptimOT(7,SPEED) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB NOIS CD CO SB LAOB PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\demo) PIN(..\..\..\..\os\kernel\include) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\test) PIN(..\..\..\..\os\ports\rc\stm8) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,22,23 - -[Root.Source Files.Config.1.Settings.2] -String.2.0=Assembling $(InputFile)... -String.3.0=mastm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) QUIET NOPR ERRORPRINT NOCOND NOLIST NOLISTINCLUDE NOGEN NOSB NOXREF MODESTM8 -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,22,23 - -[Root.Source Files.Config.1.Settings.3] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files...\demo\main.c] -ElemType=File -PathName=..\demo\main.c -Next=Root.Source Files.Source Files\board -Config.0=Root.Source Files...\demo\main.c.Config.0 -Config.1=Root.Source Files...\demo\main.c.Config.1 - -[Root.Source Files...\demo\main.c.Config.0] -Settings.0.0=Root.Source Files...\demo\main.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files...\demo\main.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files...\demo\main.c.Config.0.Settings.2 - -[Root.Source Files...\demo\main.c.Config.1] -Settings.1.0=Root.Source Files...\demo\main.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files...\demo\main.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files...\demo\main.c.Config.1.Settings.2 - -[Root.Source Files...\demo\main.c.Config.0.Settings.0] -String.6.0=2010,6,4,10,12,31 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files...\demo\main.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files...\demo\main.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DEBUG DGC(data) AUTO -customDebugOpt -CustomOptimOT(0) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB LAOB PIN(..\..\..\test) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\..\..\..\os\ports\RC\stm8) PIN(..\..\..\..\os\kernel\include) PIN(..\demo) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,42,15 -String.8.0=Debug - -[Root.Source Files...\demo\main.c.Config.1.Settings.0] -String.6.0=2010,6,4,10,12,31 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files...\demo\main.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files...\demo\main.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DGC(data) AUTO -customSpeedOpt -CustomOptimOT(7,SPEED) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB NOIS CD CO SB LAOB PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\demo) PIN(..\..\..\..\os\kernel\include) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\test) PIN(..\..\..\..\os\ports\rc\stm8) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,22,23 -String.8.0=Release - -[Root.Source Files.Source Files\board] -ElemType=Folder -PathName=Source Files\board -Child=Root.Source Files.Source Files\board...\..\..\..\boards\st_stm8s_discovery\board.c -Next=Root.Source Files.Source Files\os -Config.0=Root.Source Files.Source Files\board.Config.0 -Config.1=Root.Source Files.Source Files\board.Config.1 - -[Root.Source Files.Source Files\board.Config.0] -Settings.0.0=Root.Source Files.Source Files\board.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\board.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\board.Config.0.Settings.2 -Settings.0.3=Root.Source Files.Source Files\board.Config.0.Settings.3 - -[Root.Source Files.Source Files\board.Config.1] -Settings.1.0=Root.Source Files.Source Files\board.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\board.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\board.Config.1.Settings.2 -Settings.1.3=Root.Source Files.Source Files\board.Config.1.Settings.3 - -[Root.Source Files.Source Files\board.Config.0.Settings.0] -String.6.0=2010,6,4,10,11,42 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\board.Config.0.Settings.1] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DEBUG DGC(data) AUTO -customDebugOpt -CustomOptimOT(0) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB LAOB PIN(..\..\..\test) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\..\..\..\os\ports\RC\stm8) PIN(..\..\..\..\os\kernel\include) PIN(..\demo) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,42,15 - -[Root.Source Files.Source Files\board.Config.0.Settings.2] -String.2.0=Assembling $(InputFile)... -String.3.0=mastm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) QUIET DEBUG NOPR ERRORPRINT MODESTM8 -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,46,5 - -[Root.Source Files.Source Files\board.Config.0.Settings.3] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\board.Config.1.Settings.0] -String.6.0=2010,6,4,10,11,42 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\board.Config.1.Settings.1] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DGC(data) AUTO -customSpeedOpt -CustomOptimOT(7,SPEED) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB NOIS CD CO SB LAOB PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\demo) PIN(..\..\..\..\os\kernel\include) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\test) PIN(..\..\..\..\os\ports\rc\stm8) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,22,23 - -[Root.Source Files.Source Files\board.Config.1.Settings.2] -String.2.0=Assembling $(InputFile)... -String.3.0=mastm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) QUIET NOPR ERRORPRINT NOCOND NOLIST NOLISTINCLUDE NOGEN NOSB NOXREF MODESTM8 -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,22,23 - -[Root.Source Files.Source Files\board.Config.1.Settings.3] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\board...\..\..\..\boards\st_stm8s_discovery\board.c] -ElemType=File -PathName=..\..\..\..\boards\st_stm8s_discovery\board.c - -[Root.Source Files.Source Files\os] -ElemType=Folder -PathName=Source Files\os -Child=Root.Source Files.Source Files\os.Source Files\os\hal - -[Root.Source Files.Source Files\os.Source Files\os\hal] -ElemType=Folder -PathName=Source Files\os\hal -Child=Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\spi.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel -Config.0=Root.Source Files.Source Files\os.Source Files\os\hal.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\hal.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\hal.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\hal.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\hal.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\hal.Config.0.Settings.2 -Settings.0.3=Root.Source Files.Source Files\os.Source Files\os\hal.Config.0.Settings.3 - -[Root.Source Files.Source Files\os.Source Files\os\hal.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\hal.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\hal.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\hal.Config.1.Settings.2 -Settings.1.3=Root.Source Files.Source Files\os.Source Files\os\hal.Config.1.Settings.3 - -[Root.Source Files.Source Files\os.Source Files\os\hal.Config.0.Settings.0] -String.6.0=2010,6,4,10,13,32 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\hal.Config.0.Settings.1] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DEBUG DGC(data) AUTO -customDebugOpt -CustomOptimOT(0) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB LAOB PIN(..\..\..\test) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\..\..\..\os\ports\RC\stm8) PIN(..\..\..\..\os\kernel\include) PIN(..\demo) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,42,15 - -[Root.Source Files.Source Files\os.Source Files\os\hal.Config.0.Settings.2] -String.2.0=Assembling $(InputFile)... -String.3.0=mastm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) QUIET DEBUG NOPR ERRORPRINT MODESTM8 -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,46,5 - -[Root.Source Files.Source Files\os.Source Files\os\hal.Config.0.Settings.3] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\hal.Config.1.Settings.0] -String.6.0=2010,6,4,10,13,32 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\hal.Config.1.Settings.1] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DGC(data) AUTO -customSpeedOpt -CustomOptimOT(7,SPEED) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB NOIS CD CO SB LAOB PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\demo) PIN(..\..\..\..\os\kernel\include) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\test) PIN(..\..\..\..\os\ports\rc\stm8) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,22,23 - -[Root.Source Files.Source Files\os.Source Files\os\hal.Config.1.Settings.2] -String.2.0=Assembling $(InputFile)... -String.3.0=mastm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) QUIET NOPR ERRORPRINT NOCOND NOLIST NOLISTINCLUDE NOGEN NOSB NOXREF MODESTM8 -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,22,23 - -[Root.Source Files.Source Files\os.Source Files\os\hal.Config.1.Settings.3] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\spi.c] -ElemType=File -PathName=..\..\..\..\os\hal\src\spi.c -Next=Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\serial.c - -[Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\serial.c] -ElemType=File -PathName=..\..\..\..\os\hal\src\serial.c -Next=Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\pwm.c - -[Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\pwm.c] -ElemType=File -PathName=..\..\..\..\os\hal\src\pwm.c -Next=Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\pal.c - -[Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\pal.c] -ElemType=File -PathName=..\..\..\..\os\hal\src\pal.c -Next=Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\mmc_spi.c - -[Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\mmc_spi.c] -ElemType=File -PathName=..\..\..\..\os\hal\src\mmc_spi.c -Next=Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\mac.c - -[Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\mac.c] -ElemType=File -PathName=..\..\..\..\os\hal\src\mac.c -Next=Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\hal.c - -[Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\hal.c] -ElemType=File -PathName=..\..\..\..\os\hal\src\hal.c -Next=Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\can.c - -[Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\can.c] -ElemType=File -PathName=..\..\..\..\os\hal\src\can.c -Next=Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\adc.c - -[Root.Source Files.Source Files\os.Source Files\os\hal...\..\..\..\os\hal\src\adc.c] -ElemType=File -PathName=..\..\..\..\os\hal\src\adc.c -Next=Root.Source Files.Source Files\os.Source Files\os\hal.Source Files\os\hal\stm8s - -[Root.Source Files.Source Files\os.Source Files\os\hal.Source Files\os\hal\stm8s] -ElemType=Folder -PathName=Source Files\os\hal\stm8s -Child=Root.Source Files.Source Files\os.Source Files\os\hal.Source Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\spi_lld.c - -[Root.Source Files.Source Files\os.Source Files\os\hal.Source Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\spi_lld.c] -ElemType=File -PathName=..\..\..\..\os\hal\platforms\stm8s\spi_lld.c -Next=Root.Source Files.Source Files\os.Source Files\os\hal.Source Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\pal_lld.c - -[Root.Source Files.Source Files\os.Source Files\os\hal.Source Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\pal_lld.c] -ElemType=File -PathName=..\..\..\..\os\hal\platforms\stm8s\pal_lld.c -Next=Root.Source Files.Source Files\os.Source Files\os\hal.Source Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\hal_lld.c - -[Root.Source Files.Source Files\os.Source Files\os\hal.Source Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\hal_lld.c] -ElemType=File -PathName=..\..\..\..\os\hal\platforms\stm8s\hal_lld.c -Next=Root.Source Files.Source Files\os.Source Files\os\hal.Source Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\serial_lld.c - -[Root.Source Files.Source Files\os.Source Files\os\hal.Source Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\serial_lld.c] -ElemType=File -PathName=..\..\..\..\os\hal\platforms\stm8s\serial_lld.c - -[Root.Source Files.Source Files\os.Source Files\os\kernel] -ElemType=Folder -PathName=Source Files\os\kernel -Child=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c -Next=Root.Source Files.Source Files\os.Source Files\os\port - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chvt.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c.Config.0.Settings.0] -String.6.0=2010,6,4,10,14,31 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DEBUG DGC(page0) AUTO -customDebugOpt -CustomOptimOT(0) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB LAOB PIN(..\..\..\test) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\..\..\..\os\ports\RC\stm8) PIN(..\..\..\..\os\kernel\include) PIN(..\demo) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,42,15 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c.Config.1.Settings.0] -String.6.0=2010,6,4,10,14,31 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chvt.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DGC(page0) AUTO -customSpeedOpt -CustomOptimOT(7,SPEED) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB NOIS CD CO SB LAOB PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\demo) PIN(..\..\..\..\os\kernel\include) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\test) PIN(..\..\..\..\os\ports\rc\stm8) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,22,23 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chthreads.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c.Config.0.Settings.0] -String.6.0=2010,6,4,10,14,31 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DEBUG DGC(data) AUTO -customDebugOpt -CustomOptimOT(0) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB LAOB PIN(..\..\..\test) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\..\..\..\os\ports\RC\stm8) PIN(..\..\..\..\os\kernel\include) PIN(..\demo) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,42,15 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c.Config.1.Settings.0] -String.6.0=2010,6,4,10,14,31 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chthreads.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DGC(data) AUTO -customSpeedOpt -CustomOptimOT(7,SPEED) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB NOIS CD CO SB LAOB PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\demo) PIN(..\..\..\..\os\kernel\include) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\test) PIN(..\..\..\..\os\ports\rc\stm8) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,22,23 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chsys.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c.Config.0.Settings.0] -String.6.0=2010,6,4,10,14,30 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DEBUG DGC(data) AUTO -customDebugOpt -CustomOptimOT(0) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB LAOB PIN(..\..\..\test) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\..\..\..\os\ports\RC\stm8) PIN(..\..\..\..\os\kernel\include) PIN(..\demo) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,42,15 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c.Config.1.Settings.0] -String.6.0=2010,6,4,10,14,30 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsys.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DGC(data) AUTO -customSpeedOpt -CustomOptimOT(7,SPEED) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB NOIS CD CO SB LAOB PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\demo) PIN(..\..\..\..\os\kernel\include) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\test) PIN(..\..\..\..\os\ports\rc\stm8) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,22,23 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chsem.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c.Config.0.Settings.0] -String.6.0=2010,6,4,10,14,30 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DEBUG DGC(data) AUTO -customDebugOpt -CustomOptimOT(0) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB LAOB PIN(..\..\..\test) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\..\..\..\os\ports\RC\stm8) PIN(..\..\..\..\os\kernel\include) PIN(..\demo) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,42,15 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c.Config.1.Settings.0] -String.6.0=2010,6,4,10,14,30 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chsem.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DGC(data) AUTO -customSpeedOpt -CustomOptimOT(7,SPEED) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB NOIS CD CO SB LAOB PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\demo) PIN(..\..\..\..\os\kernel\include) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\test) PIN(..\..\..\..\os\ports\rc\stm8) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,22,23 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chschd.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c.Config.0.Settings.0] -String.6.0=2010,6,4,10,14,30 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DEBUG DGC(data) AUTO -customDebugOpt -CustomOptimOT(0) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB LAOB PIN(..\..\..\test) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\..\..\..\os\ports\RC\stm8) PIN(..\..\..\..\os\kernel\include) PIN(..\demo) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,42,15 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c.Config.1.Settings.0] -String.6.0=2010,6,4,10,14,30 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chschd.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DGC(data) AUTO -customSpeedOpt -CustomOptimOT(7,SPEED) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB NOIS CD CO SB LAOB PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\demo) PIN(..\..\..\..\os\kernel\include) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\test) PIN(..\..\..\..\os\ports\rc\stm8) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,22,23 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chregistry.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c.Config.0.Settings.0] -String.6.0=2010,6,4,10,14,29 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DEBUG DGC(data) AUTO -customDebugOpt -CustomOptimOT(0) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB LAOB PIN(..\..\..\test) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\..\..\..\os\ports\RC\stm8) PIN(..\..\..\..\os\kernel\include) PIN(..\demo) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,42,15 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c.Config.1.Settings.0] -String.6.0=2010,6,4,10,14,29 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chregistry.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DGC(data) AUTO -customSpeedOpt -CustomOptimOT(7,SPEED) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB NOIS CD CO SB LAOB PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\demo) PIN(..\..\..\..\os\kernel\include) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\test) PIN(..\..\..\..\os\ports\rc\stm8) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,22,23 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chqueues.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c.Config.0.Settings.0] -String.6.0=2010,6,4,10,14,29 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DEBUG DGC(data) AUTO -customDebugOpt -CustomOptimOT(0) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB LAOB PIN(..\..\..\test) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\..\..\..\os\ports\RC\stm8) PIN(..\..\..\..\os\kernel\include) PIN(..\demo) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,42,15 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c.Config.1.Settings.0] -String.6.0=2010,6,4,10,14,29 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chqueues.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DGC(data) AUTO -customSpeedOpt -CustomOptimOT(7,SPEED) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB NOIS CD CO SB LAOB PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\demo) PIN(..\..\..\..\os\kernel\include) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\test) PIN(..\..\..\..\os\ports\rc\stm8) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,22,23 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chmtx.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c.Config.0.Settings.0] -String.6.0=2010,6,4,10,14,28 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DEBUG DGC(data) AUTO -customDebugOpt -CustomOptimOT(0) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB LAOB PIN(..\..\..\test) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\..\..\..\os\ports\RC\stm8) PIN(..\..\..\..\os\kernel\include) PIN(..\demo) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,42,15 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c.Config.1.Settings.0] -String.6.0=2010,6,4,10,14,28 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmtx.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DGC(data) AUTO -customSpeedOpt -CustomOptimOT(7,SPEED) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB NOIS CD CO SB LAOB PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\demo) PIN(..\..\..\..\os\kernel\include) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\test) PIN(..\..\..\..\os\ports\rc\stm8) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,22,23 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chmsg.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c.Config.0.Settings.0] -String.6.0=2010,6,4,10,14,28 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DEBUG DGC(data) AUTO -customDebugOpt -CustomOptimOT(0) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB LAOB PIN(..\..\..\test) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\..\..\..\os\ports\RC\stm8) PIN(..\..\..\..\os\kernel\include) PIN(..\demo) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,42,15 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c.Config.1.Settings.0] -String.6.0=2010,6,4,10,14,28 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmsg.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DGC(data) AUTO -customSpeedOpt -CustomOptimOT(7,SPEED) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB NOIS CD CO SB LAOB PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\demo) PIN(..\..\..\..\os\kernel\include) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\test) PIN(..\..\..\..\os\ports\rc\stm8) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,22,23 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chmempools.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c.Config.0.Settings.0] -String.6.0=2010,6,4,10,14,28 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DEBUG DGC(data) AUTO -customDebugOpt -CustomOptimOT(0) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB LAOB PIN(..\..\..\test) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\..\..\..\os\ports\RC\stm8) PIN(..\..\..\..\os\kernel\include) PIN(..\demo) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,42,15 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c.Config.1.Settings.0] -String.6.0=2010,6,4,10,14,28 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmempools.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DGC(data) AUTO -customSpeedOpt -CustomOptimOT(7,SPEED) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB NOIS CD CO SB LAOB PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\demo) PIN(..\..\..\..\os\kernel\include) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\test) PIN(..\..\..\..\os\ports\rc\stm8) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,22,23 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chmemcore.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c.Config.0.Settings.0] -String.6.0=2010,6,4,10,14,28 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DEBUG DGC(data) AUTO -customDebugOpt -CustomOptimOT(0) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB LAOB PIN(..\..\..\test) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\..\..\..\os\ports\RC\stm8) PIN(..\..\..\..\os\kernel\include) PIN(..\demo) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,42,15 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c.Config.1.Settings.0] -String.6.0=2010,6,4,10,14,28 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmemcore.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DGC(data) AUTO -customSpeedOpt -CustomOptimOT(7,SPEED) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB NOIS CD CO SB LAOB PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\demo) PIN(..\..\..\..\os\kernel\include) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\test) PIN(..\..\..\..\os\ports\rc\stm8) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,22,23 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chmboxes.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c.Config.0.Settings.0] -String.6.0=2010,6,4,10,14,27 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DEBUG DGC(data) AUTO -customDebugOpt -CustomOptimOT(0) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB LAOB PIN(..\..\..\test) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\..\..\..\os\ports\RC\stm8) PIN(..\..\..\..\os\kernel\include) PIN(..\demo) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,42,15 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c.Config.1.Settings.0] -String.6.0=2010,6,4,10,14,27 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chmboxes.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DGC(data) AUTO -customSpeedOpt -CustomOptimOT(7,SPEED) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB NOIS CD CO SB LAOB PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\demo) PIN(..\..\..\..\os\kernel\include) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\test) PIN(..\..\..\..\os\ports\rc\stm8) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,22,23 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chlists.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c.Config.0.Settings.0] -String.6.0=2010,6,4,10,14,27 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DEBUG DGC(data) AUTO -customDebugOpt -CustomOptimOT(0) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB LAOB PIN(..\..\..\test) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\..\..\..\os\ports\RC\stm8) PIN(..\..\..\..\os\kernel\include) PIN(..\demo) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,42,15 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c.Config.1.Settings.0] -String.6.0=2010,6,4,10,14,27 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chlists.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DGC(data) AUTO -customSpeedOpt -CustomOptimOT(7,SPEED) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB NOIS CD CO SB LAOB PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\demo) PIN(..\..\..\..\os\kernel\include) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\test) PIN(..\..\..\..\os\ports\rc\stm8) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,22,23 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chheap.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c.Config.0.Settings.0] -String.6.0=2010,6,4,10,14,27 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DEBUG DGC(page0) AUTO -customDebugOpt -CustomOptimOT(0) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB LAOB PIN(..\..\..\test) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\..\..\..\os\ports\RC\stm8) PIN(..\..\..\..\os\kernel\include) PIN(..\demo) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,42,15 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c.Config.1.Settings.0] -String.6.0=2010,6,4,10,14,27 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chheap.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DGC(page0) AUTO -customSpeedOpt -CustomOptimOT(7,SPEED) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB NOIS CD CO SB LAOB PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\demo) PIN(..\..\..\..\os\kernel\include) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\test) PIN(..\..\..\..\os\ports\rc\stm8) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,22,23 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chevents.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdynamic.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c.Config.0.Settings.0] -String.6.0=2010,6,4,10,14,27 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DEBUG DGC(data) AUTO -customDebugOpt -CustomOptimOT(0) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB LAOB PIN(..\..\..\test) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\..\..\..\os\ports\RC\stm8) PIN(..\..\..\..\os\kernel\include) PIN(..\demo) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,42,15 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c.Config.1.Settings.0] -String.6.0=2010,6,4,10,14,27 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chevents.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DGC(data) AUTO -customSpeedOpt -CustomOptimOT(7,SPEED) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB NOIS CD CO SB LAOB PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\demo) PIN(..\..\..\..\os\kernel\include) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\test) PIN(..\..\..\..\os\ports\rc\stm8) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,22,23 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdynamic.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chdynamic.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chdebug.c -Next=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c.Config.0.Settings.0] -String.6.0=2010,6,4,10,14,27 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DEBUG DGC(data) AUTO -customDebugOpt -CustomOptimOT(0) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB LAOB PIN(..\..\..\test) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\..\..\..\os\ports\RC\stm8) PIN(..\..\..\..\os\kernel\include) PIN(..\demo) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,42,15 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c.Config.1.Settings.0] -String.6.0=2010,6,4,10,14,27 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chdebug.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DGC(data) AUTO -customSpeedOpt -CustomOptimOT(7,SPEED) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB NOIS CD CO SB LAOB PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\demo) PIN(..\..\..\..\os\kernel\include) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\test) PIN(..\..\..\..\os\ports\rc\stm8) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,22,23 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c] -ElemType=File -PathName=..\..\..\..\os\kernel\src\chcond.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c.Config.0.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c.Config.1.Settings.2 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c.Config.0.Settings.0] -String.6.0=2010,6,4,10,14,27 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c.Config.0.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c.Config.0.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DEBUG DGC(data) AUTO -customDebugOpt -CustomOptimOT(0) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB LAOB PIN(..\..\..\test) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\..\..\..\os\ports\RC\stm8) PIN(..\..\..\..\os\kernel\include) PIN(..\demo) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,42,15 -String.8.0=Debug - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c.Config.1.Settings.0] -String.6.0=2010,6,4,10,14,27 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c.Config.1.Settings.1] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\kernel...\..\..\..\os\kernel\src\chcond.c.Config.1.Settings.2] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DGC(data) AUTO -customSpeedOpt -CustomOptimOT(7,SPEED) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB NOIS CD CO SB LAOB PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\demo) PIN(..\..\..\..\os\kernel\include) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\test) PIN(..\..\..\..\os\ports\rc\stm8) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,22,23 -String.8.0=Release - -[Root.Source Files.Source Files\os.Source Files\os\port] -ElemType=Folder -PathName=Source Files\os\port -Child=Root.Source Files.Source Files\os.Source Files\os\port...\..\..\..\os\ports\rc\stm8\chcore.c -Config.0=Root.Source Files.Source Files\os.Source Files\os\port.Config.0 -Config.1=Root.Source Files.Source Files\os.Source Files\os\port.Config.1 - -[Root.Source Files.Source Files\os.Source Files\os\port.Config.0] -Settings.0.0=Root.Source Files.Source Files\os.Source Files\os\port.Config.0.Settings.0 -Settings.0.1=Root.Source Files.Source Files\os.Source Files\os\port.Config.0.Settings.1 -Settings.0.2=Root.Source Files.Source Files\os.Source Files\os\port.Config.0.Settings.2 -Settings.0.3=Root.Source Files.Source Files\os.Source Files\os\port.Config.0.Settings.3 - -[Root.Source Files.Source Files\os.Source Files\os\port.Config.1] -Settings.1.0=Root.Source Files.Source Files\os.Source Files\os\port.Config.1.Settings.0 -Settings.1.1=Root.Source Files.Source Files\os.Source Files\os\port.Config.1.Settings.1 -Settings.1.2=Root.Source Files.Source Files\os.Source Files\os\port.Config.1.Settings.2 -Settings.1.3=Root.Source Files.Source Files\os.Source Files\os\port.Config.1.Settings.3 - -[Root.Source Files.Source Files\os.Source Files\os\port.Config.0.Settings.0] -String.6.0=2010,6,4,10,13,43 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\port.Config.0.Settings.1] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DEBUG DGC(data) AUTO -customDebugOpt -CustomOptimOT(0) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB LAOB PIN(..\..\..\test) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\..\..\..\os\ports\RC\stm8) PIN(..\..\..\..\os\kernel\include) PIN(..\demo) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,42,15 - -[Root.Source Files.Source Files\os.Source Files\os\port.Config.0.Settings.2] -String.2.0=Assembling $(InputFile)... -String.3.0=mastm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) QUIET DEBUG NOPR ERRORPRINT MODESTM8 -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,46,5 - -[Root.Source Files.Source Files\os.Source Files\os\port.Config.0.Settings.3] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\port.Config.1.Settings.0] -String.6.0=2010,6,4,10,13,43 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Source Files.Source Files\os.Source Files\os\port.Config.1.Settings.1] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DGC(data) AUTO -customSpeedOpt -CustomOptimOT(7,SPEED) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB NOIS CD CO SB LAOB PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\demo) PIN(..\..\..\..\os\kernel\include) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\test) PIN(..\..\..\..\os\ports\rc\stm8) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,22,23 - -[Root.Source Files.Source Files\os.Source Files\os\port.Config.1.Settings.2] -String.2.0=Assembling $(InputFile)... -String.3.0=mastm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) QUIET NOPR ERRORPRINT NOCOND NOLIST NOLISTINCLUDE NOGEN NOSB NOXREF MODESTM8 -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,22,23 - -[Root.Source Files.Source Files\os.Source Files\os\port.Config.1.Settings.3] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Source Files.Source Files\os.Source Files\os\port...\..\..\..\os\ports\rc\stm8\chcore.c] -ElemType=File -PathName=..\..\..\..\os\ports\rc\stm8\chcore.c - -[Root.Include Files] -ElemType=Folder -PathName=Include Files -Child=Root.Include Files...\demo\halconf.h -Config.0=Root.Include Files.Config.0 -Config.1=Root.Include Files.Config.1 - -[Root.Include Files.Config.0] -Settings.0.0=Root.Include Files.Config.0.Settings.0 -Settings.0.1=Root.Include Files.Config.0.Settings.1 -Settings.0.2=Root.Include Files.Config.0.Settings.2 -Settings.0.3=Root.Include Files.Config.0.Settings.3 - -[Root.Include Files.Config.1] -Settings.1.0=Root.Include Files.Config.1.Settings.0 -Settings.1.1=Root.Include Files.Config.1.Settings.1 -Settings.1.2=Root.Include Files.Config.1.Settings.2 -Settings.1.3=Root.Include Files.Config.1.Settings.3 - -[Root.Include Files.Config.0.Settings.0] -String.6.0=2010,6,4,10,10,40 -String.8.0=Debug -Int.0=0 -Int.1=0 - -[Root.Include Files.Config.0.Settings.1] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DEBUG DGC(data) AUTO -customDebugOpt -CustomOptimOT(0) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB LAOB PIN(..\..\..\test) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\..\..\..\os\ports\RC\stm8) PIN(..\..\..\..\os\kernel\include) PIN(..\demo) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,42,15 - -[Root.Include Files.Config.0.Settings.2] -String.2.0=Assembling $(InputFile)... -String.3.0=mastm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) QUIET DEBUG NOPR ERRORPRINT MODESTM8 -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,46,5 - -[Root.Include Files.Config.0.Settings.3] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Include Files.Config.1.Settings.0] -String.6.0=2010,6,4,10,10,40 -String.8.0=Release -Int.0=0 -Int.1=0 - -[Root.Include Files.Config.1.Settings.1] -String.2.0=Compiling $(InputFile)... -String.3.0=rcstm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) WRV(0) STM8(SMALL) DGC(data) AUTO -customSpeedOpt -CustomOptimOT(7,SPEED) -CustomBasicLstPR($(IntermPath)$(InputName).lst) CD CO SB NOIS CD CO SB LAOB PIN(..\..\..\..\boards\st_stm8s_discovery) PIN(..\demo) PIN(..\..\..\..\os\kernel\include) PIN(..\..\..\..\os\hal\include) PIN(..\..\..\..\os\hal\platforms\stm8s) PIN(..\..\..\test) PIN(..\..\..\..\os\ports\rc\stm8) -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,22,23 - -[Root.Include Files.Config.1.Settings.2] -String.2.0=Assembling $(InputFile)... -String.3.0=mastm8 $(InputFile) OBJECT($(IntermPath)$(InputName).$(ObjectExt)) $(ToolsetIncOpts) QUIET NOPR ERRORPRINT NOCOND NOLIST NOLISTINCLUDE NOGEN NOSB NOXREF MODESTM8 -String.4.0=$(IntermPath)$(InputName).$(ObjectExt) -String.5.0=$(IntermPath)$(InputName).lst -String.6.0=2010,6,26,17,22,23 - -[Root.Include Files.Config.1.Settings.3] -String.2.0=Performing Custom Build on $(InputFile) -String.3.0= -String.4.0= -String.5.0= -String.6.0=2010,6,4,10,10,40 - -[Root.Include Files...\demo\halconf.h] -ElemType=File -PathName=..\demo\halconf.h -Next=Root.Include Files...\demo\chconf.h - -[Root.Include Files...\demo\chconf.h] -ElemType=File -PathName=..\demo\chconf.h -Next=Root.Include Files...\demo\mcuconf.h - -[Root.Include Files...\demo\mcuconf.h] -ElemType=File -PathName=..\demo\mcuconf.h -Next=Root.Include Files.Include Files\board - -[Root.Include Files.Include Files\board] -ElemType=Folder -PathName=Include Files\board -Child=Root.Include Files.Include Files\board...\..\..\..\boards\st_stm8s_discovery\board.h -Next=Root.Include Files.Include Files\os - -[Root.Include Files.Include Files\board...\..\..\..\boards\st_stm8s_discovery\board.h] -ElemType=File -PathName=..\..\..\..\boards\st_stm8s_discovery\board.h - -[Root.Include Files.Include Files\os] -ElemType=Folder -PathName=Include Files\os -Child=Root.Include Files.Include Files\os.Include Files\os\hal - -[Root.Include Files.Include Files\os.Include Files\os\hal] -ElemType=Folder -PathName=Include Files\os\hal -Child=Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\spi.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel - -[Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\spi.h] -ElemType=File -PathName=..\..\..\..\os\hal\include\spi.h -Next=Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\serial.h - -[Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\serial.h] -ElemType=File -PathName=..\..\..\..\os\hal\include\serial.h -Next=Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\pwm.h - -[Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\pwm.h] -ElemType=File -PathName=..\..\..\..\os\hal\include\pwm.h -Next=Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\pal.h - -[Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\pal.h] -ElemType=File -PathName=..\..\..\..\os\hal\include\pal.h -Next=Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\mmc_spi.h - -[Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\mmc_spi.h] -ElemType=File -PathName=..\..\..\..\os\hal\include\mmc_spi.h -Next=Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\mii.h - -[Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\mii.h] -ElemType=File -PathName=..\..\..\..\os\hal\include\mii.h -Next=Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\mac.h - -[Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\mac.h] -ElemType=File -PathName=..\..\..\..\os\hal\include\mac.h -Next=Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\hal.h - -[Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\hal.h] -ElemType=File -PathName=..\..\..\..\os\hal\include\hal.h -Next=Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\can.h - -[Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\can.h] -ElemType=File -PathName=..\..\..\..\os\hal\include\can.h -Next=Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\adc.h - -[Root.Include Files.Include Files\os.Include Files\os\hal...\..\..\..\os\hal\include\adc.h] -ElemType=File -PathName=..\..\..\..\os\hal\include\adc.h -Next=Root.Include Files.Include Files\os.Include Files\os\hal.Include Files\os\hal\stm8s - -[Root.Include Files.Include Files\os.Include Files\os\hal.Include Files\os\hal\stm8s] -ElemType=Folder -PathName=Include Files\os\hal\stm8s -Child=Root.Include Files.Include Files\os.Include Files\os\hal.Include Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\spi_lld.h - -[Root.Include Files.Include Files\os.Include Files\os\hal.Include Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\spi_lld.h] -ElemType=File -PathName=..\..\..\..\os\hal\platforms\stm8s\spi_lld.h -Next=Root.Include Files.Include Files\os.Include Files\os\hal.Include Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\stm8s_type.h - -[Root.Include Files.Include Files\os.Include Files\os\hal.Include Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\stm8s_type.h] -ElemType=File -PathName=..\..\..\..\os\hal\platforms\stm8s\stm8s_type.h -Next=Root.Include Files.Include Files\os.Include Files\os\hal.Include Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\stm8s.h - -[Root.Include Files.Include Files\os.Include Files\os\hal.Include Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\stm8s.h] -ElemType=File -PathName=..\..\..\..\os\hal\platforms\stm8s\stm8s.h -Next=Root.Include Files.Include Files\os.Include Files\os\hal.Include Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\serial_lld.h - -[Root.Include Files.Include Files\os.Include Files\os\hal.Include Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\serial_lld.h] -ElemType=File -PathName=..\..\..\..\os\hal\platforms\stm8s\serial_lld.h -Next=Root.Include Files.Include Files\os.Include Files\os\hal.Include Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\pal_lld.h - -[Root.Include Files.Include Files\os.Include Files\os\hal.Include Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\pal_lld.h] -ElemType=File -PathName=..\..\..\..\os\hal\platforms\stm8s\pal_lld.h -Next=Root.Include Files.Include Files\os.Include Files\os\hal.Include Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\hal_lld.h - -[Root.Include Files.Include Files\os.Include Files\os\hal.Include Files\os\hal\stm8s...\..\..\..\os\hal\platforms\stm8s\hal_lld.h] -ElemType=File -PathName=..\..\..\..\os\hal\platforms\stm8s\hal_lld.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel] -ElemType=Folder -PathName=Include Files\os\kernel -Child=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chvt.h -Next=Root.Include Files.Include Files\os.Include Files\os\port - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chvt.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chvt.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chthreads.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chthreads.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chthreads.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chsys.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chsys.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chsys.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chstreams.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chstreams.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chstreams.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chsem.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chsem.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chsem.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chschd.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chschd.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chschd.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chregistry.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chregistry.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chregistry.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chqueues.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chqueues.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chqueues.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chmtx.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chmtx.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chmtx.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chmsg.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chmsg.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chmsg.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chmempools.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chmempools.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chmempools.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chmemcore.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chmemcore.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chmemcore.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chmboxes.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chmboxes.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chmboxes.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chlists.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chlists.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chlists.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chioch.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chioch.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chioch.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chinline.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chinline.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chinline.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chheap.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chheap.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chheap.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chevents.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chevents.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chevents.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chdynamic.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chdynamic.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chdynamic.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chdebug.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chdebug.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chdebug.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chcond.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\chcond.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\chcond.h -Next=Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\ch.h - -[Root.Include Files.Include Files\os.Include Files\os\kernel...\..\..\..\os\kernel\include\ch.h] -ElemType=File -PathName=..\..\..\..\os\kernel\include\ch.h - -[Root.Include Files.Include Files\os.Include Files\os\port] -ElemType=Folder -PathName=Include Files\os\port -Child=Root.Include Files.Include Files\os.Include Files\os\port...\..\..\..\os\ports\rc\stm8\chtypes.h - -[Root.Include Files.Include Files\os.Include Files\os\port...\..\..\..\os\ports\rc\stm8\chtypes.h] -ElemType=File -PathName=..\..\..\..\os\ports\rc\stm8\chtypes.h -Next=Root.Include Files.Include Files\os.Include Files\os\port...\..\..\..\os\ports\rc\stm8\chcore.h - -[Root.Include Files.Include Files\os.Include Files\os\port...\..\..\..\os\ports\rc\stm8\chcore.h] -ElemType=File -PathName=..\..\..\..\os\ports\rc\stm8\chcore.h \ No newline at end of file diff --git a/testhal/common/testbuild/.cproject b/testhal/common/testbuild/.cproject deleted file mode 100644 index 1ce473e74..000000000 --- a/testhal/common/testbuild/.cproject +++ /dev/null @@ -1,51 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/common/testbuild/.project b/testhal/common/testbuild/.project deleted file mode 100644 index 2fd707444..000000000 --- a/testhal/common/testbuild/.project +++ /dev/null @@ -1,33 +0,0 @@ - - - HAL-BUILD_TEST - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/common/testbuild/Makefile b/testhal/common/testbuild/Makefile deleted file mode 100644 index 280c5f3e3..000000000 --- a/testhal/common/testbuild/Makefile +++ /dev/null @@ -1,221 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enables the use of FPU on Cortex-M4. -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../.. -#include $(CHIBIOS)/boards/ST_STM32F4_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/templates/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F4xx/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -#include $(CHIBIOS)/test/test.mk - -# Define linker script file here -LDSCRIPT= $(PORTLD)/STM32F407xG.ld -#LDSCRIPT= $(PORTLD)/STM32F407xG_CCM.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FPU),yes) - USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant - DDEFS += -DCORTEX_USE_FPU=TRUE -else - DDEFS += -DCORTEX_USE_FPU=FALSE -endif - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/testhal/common/testbuild/board.h b/testhal/common/testbuild/board.h deleted file mode 100644 index 328950186..000000000 --- a/testhal/common/testbuild/board.h +++ /dev/null @@ -1,40 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Setup for a generic board. - */ - -/* - * Board identifier. - */ -#define BOARD_GENERIC -#define BOARD_NAME "Generic Board" - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/testhal/common/testbuild/chconf.h b/testhal/common/testbuild/chconf.h deleted file mode 100644 index 9ba7b1772..000000000 --- a/testhal/common/testbuild/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0x20000 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE FALSE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__) -#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/testhal/common/testbuild/main.c b/testhal/common/testbuild/main.c deleted file mode 100644 index e295c1e84..000000000 --- a/testhal/common/testbuild/main.c +++ /dev/null @@ -1,29 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * Simulator main. - */ -int main(int argc, char *argv[]) { - - (void)argc; - (void)argv; - - return 0; -} -- cgit v1.2.3