From eefaedd59cccaeddcde8f54f89c98a26cc570e82 Mon Sep 17 00:00:00 2001 From: gdisirio Date: Wed, 7 May 2014 10:44:43 +0000 Subject: git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@6920 35acf78f-673a-0410-8e92-d51de3d6d3f4 --- testhal/STM32F1xx/USB_CDC/main.c | 509 --------------------------------------- 1 file changed, 509 deletions(-) delete mode 100644 testhal/STM32F1xx/USB_CDC/main.c (limited to 'testhal/STM32F1xx/USB_CDC/main.c') diff --git a/testhal/STM32F1xx/USB_CDC/main.c b/testhal/STM32F1xx/USB_CDC/main.c deleted file mode 100644 index 38dc09260..000000000 --- a/testhal/STM32F1xx/USB_CDC/main.c +++ /dev/null @@ -1,509 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include -#include - -#include "ch.h" -#include "hal.h" -#include "test.h" - -#include "shell.h" -#include "chprintf.h" - -/*===========================================================================*/ -/* USB related stuff. */ -/*===========================================================================*/ - -/* - * Endpoints to be used for USBD1. - */ -#define USBD1_DATA_REQUEST_EP 1 -#define USBD1_DATA_AVAILABLE_EP 1 -#define USBD1_INTERRUPT_REQUEST_EP 2 - -/* - * Serial over USB Driver structure. - */ -static SerialUSBDriver SDU1; - -/* - * USB Device Descriptor. - */ -static const uint8_t vcom_device_descriptor_data[18] = { - USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ - 0x02, /* bDeviceClass (CDC). */ - 0x00, /* bDeviceSubClass. */ - 0x00, /* bDeviceProtocol. */ - 0x40, /* bMaxPacketSize. */ - 0x0483, /* idVendor (ST). */ - 0x5740, /* idProduct. */ - 0x0200, /* bcdDevice. */ - 1, /* iManufacturer. */ - 2, /* iProduct. */ - 3, /* iSerialNumber. */ - 1) /* bNumConfigurations. */ -}; - -/* - * Device Descriptor wrapper. - */ -static const USBDescriptor vcom_device_descriptor = { - sizeof vcom_device_descriptor_data, - vcom_device_descriptor_data -}; - -/* Configuration Descriptor tree for a CDC.*/ -static const uint8_t vcom_configuration_descriptor_data[67] = { - /* Configuration Descriptor.*/ - USB_DESC_CONFIGURATION(67, /* wTotalLength. */ - 0x02, /* bNumInterfaces. */ - 0x01, /* bConfigurationValue. */ - 0, /* iConfiguration. */ - 0xC0, /* bmAttributes (self powered). */ - 50), /* bMaxPower (100mA). */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x01, /* bNumEndpoints. */ - 0x02, /* bInterfaceClass (Communications - Interface Class, CDC section - 4.2). */ - 0x02, /* bInterfaceSubClass (Abstract - Control Model, CDC section 4.3). */ - 0x01, /* bInterfaceProtocol (AT commands, - CDC section 4.4). */ - 0), /* iInterface. */ - /* Header Functional Descriptor (CDC section 5.2.3).*/ - USB_DESC_BYTE (5), /* bLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header - Functional Descriptor. */ - USB_DESC_BCD (0x0110), /* bcdCDC. */ - /* Call Management Functional Descriptor. */ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */ - USB_DESC_BYTE (0x01), /* bDataInterface. */ - /* ACM Functional Descriptor.*/ - USB_DESC_BYTE (4), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract - Control Management Descriptor). */ - USB_DESC_BYTE (0x02), /* bmCapabilities. */ - /* Union Functional Descriptor.*/ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bMasterInterface (Communication - Class Interface). */ - USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class - Interface). */ - /* Endpoint 2 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_INTERRUPT_REQUEST_EP|0x80, - 0x03, /* bmAttributes (Interrupt). */ - 0x0008, /* wMaxPacketSize. */ - 0xFF), /* bInterval. */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x02, /* bNumEndpoints. */ - 0x0A, /* bInterfaceClass (Data Class - Interface, CDC section 4.5). */ - 0x00, /* bInterfaceSubClass (CDC section - 4.6). */ - 0x00, /* bInterfaceProtocol (CDC section - 4.7). */ - 0x00), /* iInterface. */ - /* Endpoint 3 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00), /* bInterval. */ - /* Endpoint 1 Descriptor.*/ - USB_DESC_ENDPOINT (USBD1_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00) /* bInterval. */ -}; - -/* - * Configuration Descriptor wrapper. - */ -static const USBDescriptor vcom_configuration_descriptor = { - sizeof vcom_configuration_descriptor_data, - vcom_configuration_descriptor_data -}; - -/* - * U.S. English language identifier. - */ -static const uint8_t vcom_string0[] = { - USB_DESC_BYTE(4), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ -}; - -/* - * Vendor string. - */ -static const uint8_t vcom_string1[] = { - USB_DESC_BYTE(38), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0, - 'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0, - 'c', 0, 's', 0 -}; - -/* - * Device Description string. - */ -static const uint8_t vcom_string2[] = { - USB_DESC_BYTE(56), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0, - 'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0, - 'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0, - 'o', 0, 'r', 0, 't', 0 -}; - -/* - * Serial Number string. - */ -static const uint8_t vcom_string3[] = { - USB_DESC_BYTE(8), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - '0' + CH_KERNEL_MAJOR, 0, - '0' + CH_KERNEL_MINOR, 0, - '0' + CH_KERNEL_PATCH, 0 -}; - -/* - * Strings wrappers array. - */ -static const USBDescriptor vcom_strings[] = { - {sizeof vcom_string0, vcom_string0}, - {sizeof vcom_string1, vcom_string1}, - {sizeof vcom_string2, vcom_string2}, - {sizeof vcom_string3, vcom_string3} -}; - -/* - * Handles the GET_DESCRIPTOR callback. All required descriptors must be - * handled here. - */ -static const USBDescriptor *get_descriptor(USBDriver *usbp, - uint8_t dtype, - uint8_t dindex, - uint16_t lang) { - - (void)usbp; - (void)lang; - switch (dtype) { - case USB_DESCRIPTOR_DEVICE: - return &vcom_device_descriptor; - case USB_DESCRIPTOR_CONFIGURATION: - return &vcom_configuration_descriptor; - case USB_DESCRIPTOR_STRING: - if (dindex < 4) - return &vcom_strings[dindex]; - } - return NULL; -} - -/** - * @brief IN EP1 state. - */ -static USBInEndpointState ep1instate; - -/** - * @brief OUT EP1 state. - */ -static USBOutEndpointState ep1outstate; - -/** - * @brief EP1 initialization structure (both IN and OUT). - */ -static const USBEndpointConfig ep1config = { - USB_EP_MODE_TYPE_BULK, - NULL, - sduDataTransmitted, - sduDataReceived, - 0x0040, - 0x0040, - &ep1instate, - &ep1outstate, - 1, - NULL -}; - -/** - * @brief IN EP2 state. - */ -static USBInEndpointState ep2instate; - -/** - * @brief EP2 initialization structure (IN only). - */ -static const USBEndpointConfig ep2config = { - USB_EP_MODE_TYPE_INTR, - NULL, - sduInterruptTransmitted, - NULL, - 0x0010, - 0x0000, - &ep2instate, - NULL, - 1, - NULL -}; - -/* - * Handles the USB driver global events. - */ -static void usb_event(USBDriver *usbp, usbevent_t event) { - - switch (event) { - case USB_EVENT_RESET: - return; - case USB_EVENT_ADDRESS: - return; - case USB_EVENT_CONFIGURED: - chSysLockFromISR(); - - /* Enables the endpoints specified into the configuration. - Note, this callback is invoked from an ISR so I-Class functions - must be used.*/ - usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config); - usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config); - - /* Resetting the state of the CDC subsystem.*/ - sduConfigureHookI(&SDU1); - - chSysUnlockFromISR(); - return; - case USB_EVENT_SUSPEND: - return; - case USB_EVENT_WAKEUP: - return; - case USB_EVENT_STALLED: - return; - } - return; -} - -/* - * USB driver configuration. - */ -static const USBConfig usbcfg = { - usb_event, - get_descriptor, - sduRequestsHook, - NULL -}; - -/* - * Serial over USB driver configuration. - */ -static const SerialUSBConfig serusbcfg = { - &USBD1, - USBD1_DATA_REQUEST_EP, - USBD1_DATA_AVAILABLE_EP, - USBD1_INTERRUPT_REQUEST_EP -}; - -/*===========================================================================*/ -/* Command line related. */ -/*===========================================================================*/ - -#define SHELL_WA_SIZE THD_WORKING_AREA_SIZE(2048) -#define TEST_WA_SIZE THD_WORKING_AREA_SIZE(256) - -static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) { - size_t n, size; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: mem\r\n"); - return; - } - n = chHeapStatus(NULL, &size); - chprintf(chp, "core free memory : %u bytes\r\n", chCoreStatus()); - chprintf(chp, "heap fragments : %u\r\n", n); - chprintf(chp, "heap free total : %u bytes\r\n", size); -} - -static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) { - static const char *states[] = {CH_STATE_NAMES}; - thread_t *tp; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: threads\r\n"); - return; - } - chprintf(chp, " addr stack prio refs state\r\n"); - tp = chRegFirstThread(); - do { - chprintf(chp, "%.8lx %.8lx %4lu %4lu %9s %lu\r\n", - (uint32_t)tp, (uint32_t)tp->p_ctx.r13, - (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1), - states[tp->p_state]); - tp = chRegNextThread(tp); - } while (tp != NULL); -} - -static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) { - thread_t *tp; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: test\r\n"); - return; - } - tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriorityX(), - TestThread, chp); - if (tp == NULL) { - chprintf(chp, "out of memory\r\n"); - return; - } - chThdWait(tp); -} - -static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) { - static uint8_t buf[] = - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" - "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"; - - (void)argv; - if (argc > 0) { - chprintf(chp, "Usage: write\r\n"); - return; - } - - while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) { - chSequentialStreamWrite(&SDU1, buf, sizeof buf - 1); - } - chprintf(chp, "\r\n\nstopped\r\n"); -} - -static const ShellCommand commands[] = { - {"mem", cmd_mem}, - {"threads", cmd_threads}, - {"test", cmd_test}, - {"write", cmd_write}, - {NULL, NULL} -}; - -static const ShellConfig shell_cfg1 = { - (BaseSequentialStream *)&SDU1, - commands -}; - -/*===========================================================================*/ -/* Generic code. */ -/*===========================================================================*/ - -/* - * Red LED blinker thread, times are in milliseconds. - */ -static THD_WORKING_AREA(waThread1, 128); -static THD_FUNCTION(Thread1, arg) { - - (void)arg; - chRegSetThreadName("blinker"); - while (TRUE) { - systime_t time = serusbcfg.usbp->state == USB_ACTIVE ? 250 : 500; - palClearPad(IOPORT3, GPIOC_LED); - chThdSleepMilliseconds(time); - palSetPad(IOPORT3, GPIOC_LED); - chThdSleepMilliseconds(time); - } -} - -/* - * Application entry point. - */ -int main(void) { - thread_t *shelltp = NULL; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Initializes a serial-over-USB CDC driver. - */ - sduObjectInit(&SDU1); - sduStart(&SDU1, &serusbcfg); - - /* - * Activates the USB driver and then the USB bus pull-up on D+. - * Note, a delay is inserted in order to not have to disconnect the cable - * after a reset. - */ - usbDisconnectBus(serusbcfg.usbp); - chThdSleepMilliseconds(1500); - usbStart(serusbcfg.usbp, &usbcfg); - usbConnectBus(serusbcfg.usbp); - - /* - * Shell manager initialization. - */ - shellInit(); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing except - * sleeping in a loop and check the button state. - */ - while (TRUE) { - if (!shelltp && (SDU1.config->usbp->state == USB_ACTIVE)) - shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO); - else if (chThdTerminatedX(shelltp)) { - chThdRelease(shelltp); /* Recovers memory of the previous shell. */ - shelltp = NULL; /* Triggers spawning of a new shell. */ - } - chThdSleepMilliseconds(1000); - } -} -- cgit v1.2.3