From fe86aae1bf97d96ba38e9424d60593c4e7a5f252 Mon Sep 17 00:00:00 2001 From: Rocco Marco Guglielmi Date: Sat, 25 Jun 2016 14:51:10 +0000 Subject: Edits to USB_CDC demo. Added USB voltage validation in hal_lld.c (still not backported) git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@9663 35acf78f-673a-0410-8e92-d51de3d6d3f4 --- ...M32L4xx-USB_CDC (OpenOCD, Flash and Run).launch | 2 +- testhal/STM32/STM32L4xx/USB_CDC/halconf.h | 2 +- testhal/STM32/STM32L4xx/USB_CDC/mcuconf.h | 28 +++++++++++----------- 3 files changed, 16 insertions(+), 16 deletions(-) (limited to 'testhal/STM32/STM32L4xx') diff --git a/testhal/STM32/STM32L4xx/USB_CDC/debug/STM32L4xx-USB_CDC (OpenOCD, Flash and Run).launch b/testhal/STM32/STM32L4xx/USB_CDC/debug/STM32L4xx-USB_CDC (OpenOCD, Flash and Run).launch index d9478c988..352186e82 100644 --- a/testhal/STM32/STM32L4xx/USB_CDC/debug/STM32L4xx-USB_CDC (OpenOCD, Flash and Run).launch +++ b/testhal/STM32/STM32L4xx/USB_CDC/debug/STM32L4xx-USB_CDC (OpenOCD, Flash and Run).launch @@ -35,7 +35,7 @@ - + diff --git a/testhal/STM32/STM32L4xx/USB_CDC/halconf.h b/testhal/STM32/STM32L4xx/USB_CDC/halconf.h index f2e2b4f47..63c29ccef 100644 --- a/testhal/STM32/STM32L4xx/USB_CDC/halconf.h +++ b/testhal/STM32/STM32L4xx/USB_CDC/halconf.h @@ -41,7 +41,7 @@ * @brief Enables the ADC subsystem. */ #if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC TRUE +#define HAL_USE_ADC FALSE #endif /** diff --git a/testhal/STM32/STM32L4xx/USB_CDC/mcuconf.h b/testhal/STM32/STM32L4xx/USB_CDC/mcuconf.h index e78811e11..713bc0e85 100644 --- a/testhal/STM32/STM32L4xx/USB_CDC/mcuconf.h +++ b/testhal/STM32/STM32L4xx/USB_CDC/mcuconf.h @@ -40,7 +40,7 @@ #define STM32_VOS STM32_VOS_RANGE1 #define STM32_PVD_ENABLE FALSE #define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI16_ENABLED FALSE +#define STM32_HSI16_ENABLED TRUE #define STM32_LSI_ENABLED TRUE #define STM32_HSE_ENABLED FALSE #define STM32_LSE_ENABLED TRUE @@ -49,12 +49,12 @@ #define STM32_USB_CLOCK_ENABLED TRUE #define STM32_SAI1_CLOCK_ENABLED TRUE #define STM32_SAI2_CLOCK_ENABLED TRUE -#define STM32_MSIRANGE STM32_MSIRANGE_4M +#define STM32_MSIRANGE STM32_MSIRANGE_48M #define STM32_MSISRANGE STM32_MSISRANGE_4M #define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_MSI -#define STM32_PLLM_VALUE 1 -#define STM32_PLLN_VALUE 72 +#define STM32_PLLSRC STM32_PLLSRC_HSI16 +#define STM32_PLLM_VALUE 4 +#define STM32_PLLN_VALUE 80 #define STM32_PLLP_VALUE 7 #define STM32_PLLQ_VALUE 6 #define STM32_PLLR_VALUE 4 @@ -85,7 +85,7 @@ #define STM32_LPTIM2SEL STM32_LPTIM2SEL_PCLK1 #define STM32_SAI1SEL STM32_SAI1SEL_OFF #define STM32_SAI2SEL STM32_SAI2SEL_OFF -#define STM32_CLK48SEL STM32_CLK48SEL_PLL +#define STM32_CLK48SEL STM32_CLK48SEL_MSI #define STM32_ADCSEL STM32_ADCSEL_SYSCLK #define STM32_SWPMI1SEL STM32_SWPMI1SEL_PCLK1 #define STM32_DFSDMSEL STM32_DFSDMSEL_PCLK1 @@ -96,9 +96,9 @@ */ #define STM32_ADC_DUAL_MODE FALSE #define STM32_ADC_COMPACT_SAMPLES FALSE -#define STM32_ADC_USE_ADC1 TRUE -#define STM32_ADC_USE_ADC2 TRUE -#define STM32_ADC_USE_ADC3 TRUE +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC2 FALSE +#define STM32_ADC_USE_ADC3 FALSE #define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) #define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) #define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) @@ -239,8 +239,8 @@ */ #define STM32_SDC_USE_SDMMC1 FALSE #define STM32_SDC_SDMMC_UNALIGNED_SUPPORT TRUE -#define STM32_SDC_SDMMC_WRITE_TIMEOUT 250 -#define STM32_SDC_SDMMC_READ_TIMEOUT 25 +#define STM32_SDC_SDMMC_WRITE_TIMEOUT 1000 +#define STM32_SDC_SDMMC_READ_TIMEOUT 1000 #define STM32_SDC_SDMMC_CLOCK_DELAY 10 #define STM32_SDC_SDMMC1_DMA_PRIORITY 3 #define STM32_SDC_SDMMC1_IRQ_PRIORITY 9 @@ -279,7 +279,7 @@ #define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") /* - * ST driver system settings. + * ST driver system settings.+++ */ #define STM32_ST_IRQ_PRIORITY 8 #define STM32_ST_USE_TIMER 2 @@ -288,7 +288,7 @@ * UART driver system settings. */ #define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 TRUE +#define STM32_UART_USE_USART2 FALSE #define STM32_UART_USE_USART3 FALSE #define STM32_UART_USE_UART4 FALSE #define STM32_UART_USE_UART5 FALSE @@ -329,7 +329,7 @@ #define STM32_USB_OTGFIFO_FILL_BASEPRI 0 /* - * WDG driver system settings. + * WDG driver system settings.+++ */ #define STM32_WDG_USE_IWDG FALSE -- cgit v1.2.3