From b8352d5f4b945b307d5850b3bb2259e9ea3c75a8 Mon Sep 17 00:00:00 2001
From: Giovanni Di Sirio <gdisirio@gmail.com>
Date: Sat, 4 Nov 2017 15:49:25 +0000
Subject: git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@10938
 35acf78f-673a-0410-8e92-d51de3d6d3f4

---
 testhal/STM32/STM32F4xx/EXT/main.c | 100 -------------------------------------
 1 file changed, 100 deletions(-)
 delete mode 100644 testhal/STM32/STM32F4xx/EXT/main.c

(limited to 'testhal/STM32/STM32F4xx/EXT/main.c')

diff --git a/testhal/STM32/STM32F4xx/EXT/main.c b/testhal/STM32/STM32F4xx/EXT/main.c
deleted file mode 100644
index 377d97c2c..000000000
--- a/testhal/STM32/STM32F4xx/EXT/main.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-static void led5off(void *arg) {
-
-  (void)arg;
-  palClearPad(GPIOD, GPIOD_LED5);
-}
-
-/* Triggered when the button is pressed or released. The LED5 is set to ON.*/
-static void extcb1(EXTDriver *extp, expchannel_t channel) {
-  static virtual_timer_t vt4;
-
-  (void)extp;
-  (void)channel;
-
-  palSetPad(GPIOD, GPIOD_LED5);
-  chSysLockFromISR();
-  chVTResetI(&vt4);
-
-  /* LED4 set to OFF after 200mS.*/
-  chVTSetI(&vt4, MS2ST(200), led5off, NULL);
-  chSysUnlockFromISR();
-}
-
-static const EXTConfig extcfg = {
-  {
-    {EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOA, extcb1},
-    {EXT_CH_MODE_DISABLED, NULL},
-    {EXT_CH_MODE_DISABLED, NULL},
-    {EXT_CH_MODE_DISABLED, NULL},
-    {EXT_CH_MODE_DISABLED, NULL},
-    {EXT_CH_MODE_DISABLED, NULL},
-    {EXT_CH_MODE_DISABLED, NULL},
-    {EXT_CH_MODE_DISABLED, NULL},
-    {EXT_CH_MODE_DISABLED, NULL},
-    {EXT_CH_MODE_DISABLED, NULL},
-    {EXT_CH_MODE_DISABLED, NULL},
-    {EXT_CH_MODE_DISABLED, NULL},
-    {EXT_CH_MODE_DISABLED, NULL},
-    {EXT_CH_MODE_DISABLED, NULL},
-    {EXT_CH_MODE_DISABLED, NULL},
-    {EXT_CH_MODE_DISABLED, NULL},
-    {EXT_CH_MODE_DISABLED, NULL},
-    {EXT_CH_MODE_DISABLED, NULL},
-    {EXT_CH_MODE_DISABLED, NULL},
-    {EXT_CH_MODE_DISABLED, NULL},
-    {EXT_CH_MODE_DISABLED, NULL},
-    {EXT_CH_MODE_DISABLED, NULL},
-    {EXT_CH_MODE_DISABLED, NULL}
-  }
-};
-
-/*
- * Application entry point.
- */
-int main(void) {
-
-  /*
-   * System initializations.
-   * - HAL initialization, this also initializes the configured device drivers
-   *   and performs the board-specific initializations.
-   * - Kernel initialization, the main() function becomes a thread and the
-   *   RTOS is active.
-   */
-  halInit();
-  chSysInit();
-
-  /*
-   * Activates the EXT driver 1.
-   */
-  extStart(&EXTD1, &extcfg);
-
-  /*
-   * Normal main() thread activity, in this demo it enables and disables the
-   * button EXT channel using 5 seconds intervals.
-   */
-  while (true) {
-    chThdSleepMilliseconds(5000);
-    extChannelDisable(&EXTD1, 0);
-    chThdSleepMilliseconds(5000);
-    extChannelEnable(&EXTD1, 0);
-  }
-}
-- 
cgit v1.2.3