From b7fdc3f060da86bd718379bdf87334b0143ea44b Mon Sep 17 00:00:00 2001 From: Giovanni Di Sirio Date: Thu, 3 Dec 2015 10:51:04 +0000 Subject: git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@8553 35acf78f-673a-0410-8e92-d51de3d6d3f4 --- testhal/STM32/STM32F3xx/UART/readme.txt | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 testhal/STM32/STM32F3xx/UART/readme.txt (limited to 'testhal/STM32/STM32F3xx/UART/readme.txt') diff --git a/testhal/STM32/STM32F3xx/UART/readme.txt b/testhal/STM32/STM32F3xx/UART/readme.txt new file mode 100644 index 000000000..63293a679 --- /dev/null +++ b/testhal/STM32/STM32F3xx/UART/readme.txt @@ -0,0 +1,31 @@ +***************************************************************************** +** ChibiOS/HAL - UART driver demo for STM32F30x. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an STMicroelectronics STM32F3-Discovery board. + +** The Demo ** + +The application demonstrates the use of the STM32F30x UART driver. + +** Board Setup ** + +- Connect an RS232 transceiver to pins PA9(TX) and PA10(RX). +- Connect a terminal emulator to the transceiver (38400-N-8-1). + +** Build Procedure ** + +The demo has been tested using the free Codesourcery GCC-based toolchain +and YAGARTO. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com -- cgit v1.2.3