From 6dde2094a0c5334e69970d4ea3c7326139b441cb Mon Sep 17 00:00:00 2001 From: barthess Date: Sun, 12 Oct 2014 17:11:10 +0000 Subject: Added I2C testhal application for STM32F1xx git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@7389 35acf78f-673a-0410-8e92-d51de3d6d3f4 --- testhal/STM32/STM32F1xx/I2C/.cproject | 56 ++++ testhal/STM32/STM32F1xx/I2C/.project | 33 +++ testhal/STM32/STM32F1xx/I2C/Makefile | 206 ++++++++++++++ testhal/STM32/STM32F1xx/I2C/chconf.h | 498 +++++++++++++++++++++++++++++++++ testhal/STM32/STM32F1xx/I2C/fake.c | 43 +++ testhal/STM32/STM32F1xx/I2C/fake.h | 28 ++ testhal/STM32/STM32F1xx/I2C/halconf.h | 312 +++++++++++++++++++++ testhal/STM32/STM32F1xx/I2C/lis3.c | 92 ++++++ testhal/STM32/STM32F1xx/I2C/lis3.h | 29 ++ testhal/STM32/STM32F1xx/I2C/main.c | 115 ++++++++ testhal/STM32/STM32F1xx/I2C/mcuconf.h | 205 ++++++++++++++ testhal/STM32/STM32F1xx/I2C/readme.txt | 25 ++ 12 files changed, 1642 insertions(+) create mode 100644 testhal/STM32/STM32F1xx/I2C/.cproject create mode 100644 testhal/STM32/STM32F1xx/I2C/.project create mode 100644 testhal/STM32/STM32F1xx/I2C/Makefile create mode 100644 testhal/STM32/STM32F1xx/I2C/chconf.h create mode 100644 testhal/STM32/STM32F1xx/I2C/fake.c create mode 100644 testhal/STM32/STM32F1xx/I2C/fake.h create mode 100644 testhal/STM32/STM32F1xx/I2C/halconf.h create mode 100644 testhal/STM32/STM32F1xx/I2C/lis3.c create mode 100644 testhal/STM32/STM32F1xx/I2C/lis3.h create mode 100644 testhal/STM32/STM32F1xx/I2C/main.c create mode 100644 testhal/STM32/STM32F1xx/I2C/mcuconf.h create mode 100644 testhal/STM32/STM32F1xx/I2C/readme.txt (limited to 'testhal/STM32/STM32F1xx') diff --git a/testhal/STM32/STM32F1xx/I2C/.cproject b/testhal/STM32/STM32F1xx/I2C/.cproject new file mode 100644 index 000000000..dd840f7ac --- /dev/null +++ b/testhal/STM32/STM32F1xx/I2C/.cproject @@ -0,0 +1,56 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/testhal/STM32/STM32F1xx/I2C/.project b/testhal/STM32/STM32F1xx/I2C/.project new file mode 100644 index 000000000..4bc646560 --- /dev/null +++ b/testhal/STM32/STM32F1xx/I2C/.project @@ -0,0 +1,33 @@ + + + STM32F1xx-I2C + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + + + os + 2 + CHIBIOS/os + + + diff --git a/testhal/STM32/STM32F1xx/I2C/Makefile b/testhal/STM32/STM32F1xx/I2C/Makefile new file mode 100644 index 000000000..003310836 --- /dev/null +++ b/testhal/STM32/STM32F1xx/I2C/Makefile @@ -0,0 +1,206 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x400 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4. +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../.. +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/hal/boards/OLIMEX_STM32_103STK/board.mk +include $(CHIBIOS)/os/hal/ports/STM32/STM32F1xx/platform.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_stm32f1xx.mk +#include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT = $(PORTLD)/STM32F103xB.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(OSALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c \ + lis3.c \ + fake.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m3 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = -lm + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F1xx/I2C/chconf.h b/testhal/STM32/STM32F1xx/I2C/chconf.h new file mode 100644 index 000000000..49a557804 --- /dev/null +++ b/testhal/STM32/STM32F1xx/I2C/chconf.h @@ -0,0 +1,498 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 16 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS TRUE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F1xx/I2C/fake.c b/testhal/STM32/STM32F1xx/I2C/fake.c new file mode 100644 index 000000000..6c7506023 --- /dev/null +++ b/testhal/STM32/STM32F1xx/I2C/fake.c @@ -0,0 +1,43 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * Not responding slave test + */ +#include "ch.h" +#include "hal.h" + +#define addr 0b1001100 + +static uint8_t rx_data[2]; +static i2cflags_t errors = 0; + +/* This is main function. */ +void request_fake(void){ + msg_t status = MSG_OK; + systime_t tmo = MS2ST(4); + + i2cAcquireBus(&I2CD1); + status = i2cMasterReceiveTimeout(&I2CD1, addr, rx_data, 2, tmo); + i2cReleaseBus(&I2CD1); + + if (status == MSG_RESET){ + errors = i2cGetErrors(&I2CD1); + osalDbgCheck(I2C_ACK_FAILURE == errors); + } +} + + diff --git a/testhal/STM32/STM32F1xx/I2C/fake.h b/testhal/STM32/STM32F1xx/I2C/fake.h new file mode 100644 index 000000000..1c2ef8eaa --- /dev/null +++ b/testhal/STM32/STM32F1xx/I2C/fake.h @@ -0,0 +1,28 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef FAKE_H_ +#define FAKE_H_ + +#ifdef __cplusplus +extern "C" { +#endif + void request_fake(void); +#ifdef __cplusplus +} +#endif + +#endif /* FAKE_H_ */ diff --git a/testhal/STM32/STM32F1xx/I2C/halconf.h b/testhal/STM32/STM32F1xx/I2C/halconf.h new file mode 100644 index 000000000..858b84dbe --- /dev/null +++ b/testhal/STM32/STM32F1xx/I2C/halconf.h @@ -0,0 +1,312 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C TRUE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/testhal/STM32/STM32F1xx/I2C/lis3.c b/testhal/STM32/STM32F1xx/I2C/lis3.c new file mode 100644 index 000000000..6a1c79164 --- /dev/null +++ b/testhal/STM32/STM32F1xx/I2C/lis3.c @@ -0,0 +1,92 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * This is device realize "read through write" paradigm. This is not + * standard, but most of I2C devices use this paradigm. + * You must write to device reading address, send restart to bus, + * and then begin reading process. + */ + +#include + +#include "ch.h" +#include "hal.h" + +#include "lis3.h" + +#define addr 0b0011101 + +/* autoincrement bit position. This bit needs to perform reading of + * multiple bytes at one request */ +#define AUTO_INCREMENT_BIT (1<<7) + +/* slave specific addresses */ +#define ACCEL_STATUS_REG 0x27 +#define ACCEL_CTRL_REG1 0x20 +#define ACCEL_OUT_DATA 0x28 + +/* buffers */ +static uint8_t accel_rx_data[8]; +static uint8_t accel_tx_data[8]; + +/* + * + */ +void lis3Start(void){ + msg_t status = MSG_OK; + systime_t tmo = MS2ST(4); + + /* configure accelerometer */ + accel_tx_data[0] = ACCEL_CTRL_REG1 | AUTO_INCREMENT_BIT; + accel_tx_data[1] = 0b11100111; + accel_tx_data[2] = 0b01000001; + accel_tx_data[3] = 0b00000000; + + /* sending */ + i2cAcquireBus(&I2CD1); + status = i2cMasterTransmitTimeout(&I2CD1, addr, + accel_tx_data, 4, accel_rx_data, 0, tmo); + i2cReleaseBus(&I2CD1); + + osalDbgCheck(MSG_OK == status); +} + +/* + * + */ +#include +void lis3GetAcc(float *result) { + msg_t status = MSG_OK; + systime_t tmo = MS2ST(4); + size_t i = 0; + int16_t tmp; + + accel_tx_data[0] = ACCEL_OUT_DATA | AUTO_INCREMENT_BIT; + i2cAcquireBus(&I2CD1); + status = i2cMasterTransmitTimeout(&I2CD1, addr, + accel_tx_data, 1, accel_rx_data, 6, tmo); + i2cReleaseBus(&I2CD1); + + osalDbgCheck(MSG_OK == status); + + for (i=0; i<3; i++){ + tmp = accel_rx_data[i*2] + (accel_rx_data[i*2+1] << 8); + result[i] = tmp; + result[i] /= 16384; /* convert raw value to G */ + } +} + diff --git a/testhal/STM32/STM32F1xx/I2C/lis3.h b/testhal/STM32/STM32F1xx/I2C/lis3.h new file mode 100644 index 000000000..c31cb7bb1 --- /dev/null +++ b/testhal/STM32/STM32F1xx/I2C/lis3.h @@ -0,0 +1,29 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef LIS3_H_ +#define LIS3_H_ + +#ifdef __cplusplus +extern "C" { +#endif + void lis3Start(void); + void lis3GetAcc(float *result); +#ifdef __cplusplus +} +#endif + +#endif /* LIS3_H_ */ diff --git a/testhal/STM32/STM32F1xx/I2C/main.c b/testhal/STM32/STM32F1xx/I2C/main.c new file mode 100644 index 000000000..2b0d3383e --- /dev/null +++ b/testhal/STM32/STM32F1xx/I2C/main.c @@ -0,0 +1,115 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + Concepts and parts of this file have been contributed by Uladzimir Pylinsky + aka barthess. + */ + +/* + This demo: + 1) turns LED on when you incline (~45 deg.) or shake the board; + 2) correctly handles absence of slave device on bus. + */ + +#include +#include + +#include "ch.h" +#include "hal.h" + +#include "lis3.h" +#include "fake.h" + +/* measured acceleration components {x,y,z} */ +static float acc[3]; + +/* + * Accelerometer polling thread. + */ +static THD_WORKING_AREA(PollAccelThreadWA, 256); +static THD_FUNCTION(PollAccelThread, arg) { + chRegSetThreadName("PollAccel"); + (void)arg; + + while (TRUE) { + osalThreadSleepMilliseconds(32); + lis3GetAcc(acc); + } + return 0; +} + +/* + * Fake polling thread. + */ +static THD_WORKING_AREA(PollFakeThreadWA, 256); +static THD_FUNCTION(PollFakeThread, arg) { + chRegSetThreadName("PollFake"); + (void)arg; + + while (TRUE) { + osalThreadSleepMilliseconds(16); + request_fake(); + } + return 0; +} + +/* + * I2C1 config. + */ +static const I2CConfig i2cfg1 = { + OPMODE_I2C, + 400000, + FAST_DUTY_CYCLE_2, +}; + +/* + * Entry point, note, the main() function is already a thread in the system + * on entry. + */ +int main(void) { + + halInit(); + chSysInit(); + + i2cStart(&I2CD1, &i2cfg1); + lis3Start(); + + /* Create accelerometer thread. */ + chThdCreateStatic(PollAccelThreadWA, + sizeof(PollAccelThreadWA), + NORMALPRIO, + PollAccelThread, + NULL); + + /* Create not responding thread. */ + chThdCreateStatic(PollFakeThreadWA, + sizeof(PollFakeThreadWA), + NORMALPRIO, + PollFakeThread, + NULL); + + /* main loop handles LED */ + while (TRUE) { + if (sqrtf(acc[0]*acc[0] + acc[1]*acc[1]) > 0.5) + palClearPad(IOPORT3, GPIOC_LED); /* on */ + else + palSetPad(IOPORT3, GPIOC_LED); /* off */ + osalThreadSleepMilliseconds(20); + } + + return 0; +} diff --git a/testhal/STM32/STM32F1xx/I2C/mcuconf.h b/testhal/STM32/STM32F1xx/I2C/mcuconf.h new file mode 100644 index 000000000..ed641bae1 --- /dev/null +++ b/testhal/STM32/STM32F1xx/I2C/mcuconf.h @@ -0,0 +1,205 @@ +/* + ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#define STM32F103_MCUCONF + +/* + * STM32F103 drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED FALSE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_RTCSEL STM32_RTCSEL_HSEDIV +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC1_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 TRUE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * RTC driver system settings. + */ +#define STM32_RTC_IRQ_PRIORITY 15 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 FALSE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 + diff --git a/testhal/STM32/STM32F1xx/I2C/readme.txt b/testhal/STM32/STM32F1xx/I2C/readme.txt new file mode 100644 index 000000000..eade265fa --- /dev/null +++ b/testhal/STM32/STM32F1xx/I2C/readme.txt @@ -0,0 +1,25 @@ +***************************************************************************** +** ChibiOS/RT HAL - I2C driver demo for STM32. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an Olimex STM32-103STK board. + +** The Demo ** + +The application demonstrates the use of the STM32 I2C driver. + +** Build Procedure ** + +The demo has been tested using the free GCC ARM Embedded toolchain. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com -- cgit v1.2.3