From 750f1f4ae6ce75e0cbd8d6923b026376b607ffad Mon Sep 17 00:00:00 2001 From: barthess Date: Thu, 1 Dec 2011 18:21:22 +0000 Subject: I2C. Old driver moved to I2Cv1 dir. git-svn-id: svn://svn.code.sf.net/p/chibios/svn/branches/i2c_dev@3547 35acf78f-673a-0410-8e92-d51de3d6d3f4 --- os/hal/platforms/STM32/I2Cv1/i2c_lld.c | 1100 ++++++++++++++++++++++++++++++++ os/hal/platforms/STM32/I2Cv1/i2c_lld.h | 318 +++++++++ 2 files changed, 1418 insertions(+) create mode 100644 os/hal/platforms/STM32/I2Cv1/i2c_lld.c create mode 100644 os/hal/platforms/STM32/I2Cv1/i2c_lld.h (limited to 'os/hal/platforms/STM32') diff --git a/os/hal/platforms/STM32/I2Cv1/i2c_lld.c b/os/hal/platforms/STM32/I2Cv1/i2c_lld.c new file mode 100644 index 000000000..93b4c4061 --- /dev/null +++ b/os/hal/platforms/STM32/I2Cv1/i2c_lld.c @@ -0,0 +1,1100 @@ +/* + ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010, + 2011 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +/** + * @file STM32/i2c_lld.c + * @brief STM32 I2C subsystem low level driver source. Slave mode not implemented. + * @addtogroup I2C + * @{ + */ + +#include "ch.h" +#include "hal.h" +#include "i2c_lld.h" + +#if HAL_USE_I2C || defined(__DOXYGEN__) + +/*===========================================================================*/ +/* Datasheet notes. */ +/*===========================================================================*/ +/** + * From RM0008.pdf + * + * Note: + * When the STOP, START or PEC bit is set, the software must NOT perform + * any write access to I2C_CR1 before this bit is cleared by hardware. + * Otherwise there is a risk of setting a second STOP, START or PEC request. + */ + +/*===========================================================================*/ +/* Driver constants. */ +/*===========================================================================*/ +#define I2C_STOP_GPT_TIMEOUT 50 /* waiting timer value */ +#define I2C_START_GPT_TIMEOUT 50 /* waiting timer value */ +#define I2C_POLLING_TIMEOUT 0xFFFF + +/*===========================================================================*/ +/* Driver exported variables. */ +/*===========================================================================*/ + +/** @brief I2C1 driver identifier.*/ +#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__) +I2CDriver I2CD1; +#endif + +/** @brief I2C2 driver identifier.*/ +#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__) +I2CDriver I2CD2; +#endif + +/*===========================================================================*/ +/* Driver local variables. */ +/*===========================================================================*/ + +/* Debugging variables */ +#if CH_DBG_ENABLE_ASSERTS +static volatile uint16_t dbgSR1 = 0; +static volatile uint16_t dbgSR2 = 0; +static volatile uint16_t dbgCR1 = 0; +static volatile uint16_t dbgCR2 = 0; +#endif /* CH_DBG_ENABLE_ASSERTS */ + +/* defines for convenience purpose */ +#if I2C_SUPPORTS_CALLBACKS +#define txBuffp (i2cp->txbuff_p) +#define rxBuffp (i2cp->rxbuff_p) +#endif /* I2C_SUPPORTS_CALLBACKS */ + +/*===========================================================================*/ +/* Driver local functions. */ +/*===========================================================================*/ +#if I2C_SUPPORTS_CALLBACKS +#if (!(STM32_I2C_I2C1_USE_POLLING_WAIT)) && STM32_I2C_USE_I2C1 +/* I2C1 GPT callback. */ +static void i2c1gptcb(GPTDriver *gptp) { + (void)gptp; + I2CDriver *i2cp = &I2CD1; + + chSysLockFromIsr(); + i2cp->flags &= ~I2C_FLG_TIMER_ARMED; + + switch(i2cp->id_state){ + case I2C_ACTIVE_TRANSMIT: + i2c_lld_master_transmit(i2cp, i2cp->slave_addr, i2cp->txbuf, i2cp->txbytes, i2cp->rxbuf, i2cp->rxbytes); + break; + + case I2C_ACTIVE_RECEIVE: + i2c_lld_master_receive(i2cp, i2cp->slave_addr, i2cp->rxbuf, i2cp->rxbytes); + break; + + case I2C_ACTIVE_TRANSCEIVE: + i2c_lld_master_transceive(i2cp); + break; + + default: + break; + } + chSysUnlockFromIsr(); +} +/* I2C1 GPT configuration. */ +static const GPTConfig i2c1gptcfg = { + 1000000, /* 1MHz timer clock.*/ + i2c1gptcb /* Timer callback.*/ +}; +#endif /* STM32_I2C_I2C1_USE_POLLING_WAIT */ + +#if (!(STM32_I2C_I2C2_USE_POLLING_WAIT)) && STM32_I2C_USE_I2C2 +/* I2C2 GPT callback. */ +static void i2c2gptcb(GPTDriver *gptp) { + (void)gptp; + I2CDriver *i2cp = &I2CD2; + + chSysLockFromIsr(); + i2cp->flags &= ~I2C_FLG_TIMER_ARMED; + + switch(i2cp->id_state){ + case I2C_ACTIVE_TRANSMIT: + i2c_lld_master_transmit(i2cp, i2cp->slave_addr, i2cp->txbuf, i2cp->txbytes, i2cp->rxbuf, i2cp->rxbytes); + break; + + case I2C_ACTIVE_RECEIVE: + i2c_lld_master_receive(i2cp, i2cp->slave_addr, i2cp->rxbuf, i2cp->rxbytes); + break; + + case I2C_ACTIVE_TRANSCEIVE: + i2c_lld_master_transceive(i2cp); + break; + + default: + break; + } + chSysUnlockFromIsr(); +} +/* I2C2 GPT configuration. */ +static const GPTConfig i2c2gptcfg = { + 1000000, /* 1MHz timer clock.*/ + i2c2gptcb /* Timer callback.*/ +}; +#endif /* STM32_I2C_I2C2_USE_POLLING_WAIT */ +#endif /* I2C_SUPPORTS_CALLBACKS */ + +/** + * @brief Function for I2C debugging purpose. + * @note Internal use only. + * + * @param[in] i2cp pointer to the @p I2CDriver object + * + * @notapi + */ +#if CH_DBG_ENABLE_ASSERTS +void _i2c_unhandled_case(I2CDriver *i2cp){ + dbgCR1 = i2cp->id_i2c->CR1; + dbgCR2 = i2cp->id_i2c->CR2; + chDbgAssert((dbgSR1 + dbgSR2) == 0, + "i2c_serve_event_interrupt(), #1", + "unhandled case"); +} +#else +#define _i2c_unhandled_case(i2cp) +#endif /* CH_DBG_ENABLE_ASSERTS */ + +#if I2C_SUPPORTS_CALLBACKS +/** + * @brief Return the last event value from I2C status registers. + * @note Internal use only. + * + * @param[in] i2cp pointer to the @p I2CDriver object + * + * @notapi + */ +static uint32_t i2c_get_event(I2CDriver *i2cp){ + uint16_t regSR1 = i2cp->id_i2c->SR1; + uint16_t regSR2 = i2cp->id_i2c->SR2; + #if CH_DBG_ENABLE_ASSERTS + dbgSR1 = regSR1; + dbgSR2 = regSR2; + #endif /* CH_DBG_ENABLE_ASSERTS */ + + return (I2C_EV_MASK & (regSR1 | (regSR2 << 16))); +} + +/** + * @brief Handle the flags/interrupts. + * @note Internal use only. + * + * @param[in] i2cp pointer to the @p I2CDriver object + * + * @notapi + */ +void _i2c_ev6_master_rec_mode_selected(I2CDriver *i2cp){ + I2C_TypeDef *dp = i2cp->id_i2c; + + switch(i2cp->flags & EV6_SUBEV_MASK) { + + case I2C_EV6_3_MASTER_REC_1BTR_MODE_SELECTED: /* only an single byte to receive */ + dp->CR1 &= (uint16_t)~I2C_CR1_ACK; /* Clear ACK */ + dp->CR1 |= I2C_CR1_STOP; /* Program the STOP */ + break; + + case I2C_EV6_1_MASTER_REC_2BTR_MODE_SELECTED: /* only two bytes to receive */ + dp->CR1 &= (uint16_t)~I2C_CR1_ACK; /* Clear ACK */ + dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN; /* Disable the ITBUF in order to have only the BTF interrupt */ + break; + + default: /* more than 2 bytes to receive */ + break; + } +} + +/** + * @brief Handle cases of 2 or 3 bytes receiving. + * @note Internal use only. + * + * @param[in] i2cp pointer to the @p I2CDriver object + * + * @notapi + */ +void _i2c_ev7_master_rec_byte_qued(I2CDriver *i2cp){ + I2C_TypeDef *dp = i2cp->id_i2c; + + switch(i2cp->flags & EV7_SUBEV_MASK) { + + case I2C_EV7_2_MASTER_REC_3BYTES_TO_PROCESS: + /* Only for case of three bytes to be received. + * DataN-2 and DataN-1 already received. */ + dp->CR1 &= (uint16_t)~I2C_CR1_ACK; /* Clear ACK */ + *rxBuffp = dp->DR; /* Read the DataN-2. This clear the RXE & BFT flags and launch the DataN exception in the shift register (ending the SCL stretch) */ + rxBuffp++; + chSysLockFromIsr(); + dp->CR1 |= I2C_CR1_STOP; /* Program the STOP */ + *rxBuffp = dp->DR; /* Read the DataN-1 */ + chSysUnlockFromIsr(); + rxBuffp++; + i2cp->rxbytes -= 2; /* Decrement the number of readed bytes */ + i2cp->flags = 0; + dp->CR2 |= I2C_CR2_ITBUFEN; /* ready for read DataN. Enable interrupt for next (and last) RxNE event*/ + break; + + case I2C_EV7_3_MASTER_REC_2BYTES_TO_PROCESS: + /* only for case of two bytes to be received + * DataN-1 and DataN are received */ + dp->CR2 &= (uint16_t)~I2C_CR2_ITEVTEN; + dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN; + chSysLockFromIsr(); + dp->CR1 |= I2C_CR1_STOP; /* Program the STOP */ + *rxBuffp = dp->DR; /* Read the DataN-1*/ + rxBuffp++; + *rxBuffp = dp->DR; /* Read the DataN*/ + chSysUnlockFromIsr(); + i2cp->rxbytes = 0; + i2cp->flags = 0; + _i2c_isr_code(i2cp, i2cp->id_slave_config); /* Portable I2C ISR code defined in the high level driver. */ + break; + + case I2C_FLG_MASTER_RECEIVER: + /* Some times in hi load scenarions it is possible to "miss" interrupt + * because STM32 I2C has OR'ed interrupt sources. This case handle that + * scenario. */ + if (i2cp->rxbytes > 3){ + *rxBuffp = dp->DR; + rxBuffp++; + (i2cp->rxbytes)--; + } + else{ + _i2c_unhandled_case(i2cp); + } + break; + + default: + _i2c_unhandled_case(i2cp); + break; + } +} + +/** + * @brief Main I2C interrupt handler. + * @note Internal use only. + * + * @param[in] i2cp pointer to the @p I2CDriver object + * + * @notapi + */ +static void i2c_serve_event_interrupt(I2CDriver *i2cp) { + I2C_TypeDef *dp = i2cp->id_i2c; + + switch(i2c_get_event(i2cp)) { + + case I2C_EV5_MASTER_MODE_SELECT: + i2cp->flags &= ~I2C_FLG_HEADER_SENT; + dp->DR = i2cp->slave_addr1; + break; + + case I2C_EV9_MASTER_ADDR_10BIT: + if(i2cp->flags & I2C_FLG_MASTER_RECEIVER) { + i2cp->slave_addr1 |= 0x01; + i2cp->flags |= I2C_FLG_HEADER_SENT; + } + dp->DR = i2cp->slave_addr2; + break; + + /************************************************************************** + * Master Transmitter part + */ + case I2C_EV6_MASTER_TRA_MODE_SELECTED: + if(i2cp->flags & I2C_FLG_HEADER_SENT){ + dp->CR1 |= I2C_CR1_START; /* re-send the start in 10-Bit address mode */ + break; + } + txBuffp = (uint8_t*)i2cp->txbuf; /* Initialize the transmit buffer pointer */ + i2cp->txbytes--; + if(i2cp->txbytes == 0) { /* If no further data to be sent, disable the I2C ITBUF in order to not have a TxE interrupt */ + dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN; + } + dp->DR = *txBuffp; /* EV8_1 write the first data */ + txBuffp++; + break; + + case I2C_EV8_MASTER_BYTE_TRANSMITTING: + if(i2cp->txbytes > 0) { + i2cp->txbytes--; + if(i2cp->txbytes == 0) { /* If no further data to be sent, disable the ITBUF in order to not have a TxE interrupt */ + dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN; + } + dp->DR = *txBuffp; + txBuffp++; + } + break; + + case I2C_EV8_2_MASTER_BYTE_TRANSMITTED: + dp->CR2 &= (uint16_t)~I2C_CR2_ITEVTEN; /* Disable ITEVT In order to not have again a BTF IT */ + if (i2cp->rxbytes == 0){ /* if nothing to read then generate stop */ + dp->CR1 |= I2C_CR1_STOP; + _i2c_isr_code(i2cp, i2cp->id_slave_config); /* Portable I2C ISR code defined in the high level driver. */ + } + else{ /* start reading operation */ + i2cp->id_i2c->CR1 |= I2C_CR1_START; /* send start bit */ + i2c_lld_master_transceive(i2cp); + } + break; + + /************************************************************************** + * Master Receiver part + */ + case I2C_EV6_MASTER_REC_MODE_SELECTED: + _i2c_ev6_master_rec_mode_selected(i2cp); + rxBuffp = i2cp->rxbuf; /* Initialize receive buffer pointer */ + break; + + case I2C_EV7_MASTER_REC_BYTE_RECEIVED: + if(i2cp->rxbytes > 3) { + *rxBuffp = dp->DR; /* Read the data register */ + rxBuffp++; + i2cp->rxbytes--; + if(i2cp->rxbytes == 3){ /* Disable the ITBUF in order to have only the BTF interrupt */ + dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN; + i2cp->flags |= I2C_FLG_3BTR; + } + } + else if (i2cp->rxbytes == 3){ /* Disable the ITBUF in order to have only the BTF interrupt */ + dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN; + i2cp->flags |= I2C_FLG_3BTR; + } + break; + + case I2C_EV7_MASTER_REC_BYTE_QUEUED: + _i2c_ev7_master_rec_byte_qued(i2cp); + break; + + default: /* only 1 byte must to be read to complete trasfer. Stop already sent to bus. */ + chDbgAssert((i2cp->rxbytes) == 1, + "i2c_serve_event_interrupt(), #1", + "more than 1 byte to be received"); + *rxBuffp = dp->DR; /* Read the data register */ + i2cp->rxbytes = 0; + dp->CR2 &= (uint16_t)~I2C_CR2_ITEVTEN; /* disable interrupts */ + dp->CR2 &= (uint16_t)~I2C_CR2_ITBUFEN; + _i2c_isr_code(i2cp, i2cp->id_slave_config); /* Portable I2C ISR code defined in the high level driver.*/ + break; + } +} +#endif /* I2C_SUPPORTS_CALLBACKS */ + +static void i2c_serve_error_interrupt(I2CDriver *i2cp) { + i2cflags_t flags; + I2C_TypeDef *reg; + + reg = i2cp->id_i2c; + flags = I2CD_NO_ERROR; + + if(reg->SR1 & I2C_SR1_BERR) { /* Bus error */ + reg->SR1 &= ~I2C_SR1_BERR; + flags |= I2CD_BUS_ERROR; + } + if(reg->SR1 & I2C_SR1_ARLO) { /* Arbitration lost */ + reg->SR1 &= ~I2C_SR1_ARLO; + flags |= I2CD_ARBITRATION_LOST; + } + if(reg->SR1 & I2C_SR1_AF) { /* Acknowledge fail */ + reg->SR1 &= ~I2C_SR1_AF; + reg->CR1 |= I2C_CR1_STOP; /* setting stop bit */ + while(i2cp->id_i2c->CR1 & I2C_CR1_STOP) + ; + flags |= I2CD_ACK_FAILURE; + } + if(reg->SR1 & I2C_SR1_OVR) { /* Overrun */ + reg->SR1 &= ~I2C_SR1_OVR; + flags |= I2CD_OVERRUN; + } + if(reg->SR1 & I2C_SR1_PECERR) { /* PEC error */ + reg->SR1 &= ~I2C_SR1_PECERR; + flags |= I2CD_PEC_ERROR; + } + if(reg->SR1 & I2C_SR1_TIMEOUT) { /* SMBus Timeout */ + reg->SR1 &= ~I2C_SR1_TIMEOUT; + flags |= I2CD_TIMEOUT; + } + if(reg->SR1 & I2C_SR1_SMBALERT) { /* SMBus alert */ + reg->SR1 &= ~I2C_SR1_SMBALERT; + flags |= I2CD_SMB_ALERT; + } + + if(flags != I2CD_NO_ERROR) { /* send communication end signal */ + chSysLockFromIsr(); + i2cAddFlagsI(i2cp, flags); + chSysUnlockFromIsr(); + #if I2C_SUPPORTS_CALLBACKS + _i2c_isr_err_code(i2cp, i2cp->id_slave_config); + #endif /* I2C_SUPPORTS_CALLBACKS */ + } +} + + +#if STM32_I2C_USE_I2C1 || defined(__DOXYGEN__) +/** + * @brief I2C1 event interrupt handler. + */ +#if I2C_SUPPORTS_CALLBACKS +CH_IRQ_HANDLER(VectorBC) { + + CH_IRQ_PROLOGUE(); + i2c_serve_event_interrupt(&I2CD1); + CH_IRQ_EPILOGUE(); +} +#endif /* I2C_SUPPORTS_CALLBACKS */ +/** + * @brief I2C1 error interrupt handler. + */ +CH_IRQ_HANDLER(VectorC0) { + + CH_IRQ_PROLOGUE(); + i2c_serve_error_interrupt(&I2CD1); + CH_IRQ_EPILOGUE(); +} +#endif /* STM32_I2C_USE_I2C1 */ + +#if STM32_I2C_USE_I2C2 || defined(__DOXYGEN__) +/** + * @brief I2C2 event interrupt handler. + */ +#if I2C_SUPPORTS_CALLBACKS +CH_IRQ_HANDLER(VectorC4) { + + CH_IRQ_PROLOGUE(); + i2c_serve_event_interrupt(&I2CD2); + CH_IRQ_EPILOGUE(); +} +#endif /* I2C_SUPPORTS_CALLBACKS */ +/** + * @brief I2C2 error interrupt handler. + */ +CH_IRQ_HANDLER(VectorC8) { + + CH_IRQ_PROLOGUE(); + i2c_serve_error_interrupt(&I2CD2); + CH_IRQ_EPILOGUE(); +} +#endif /* STM32_I2C_USE_I2C2 */ + +/** + * @brief Low level I2C driver initialization. + */ +void i2c_lld_init(void) { + +#if STM32_I2C_USE_I2C1 + i2cObjectInit(&I2CD1); + I2CD1.id_i2c = I2C1; + +#if I2C_SUPPORTS_CALLBACKS +#if !(STM32_I2C_I2C1_USE_POLLING_WAIT) + I2CD1.timer = &(STM32_I2C_I2C1_USE_GPT_TIM); + I2CD1.timer_cfg = &i2c1gptcfg; +#endif /* !(STM32_I2C_I2C1_USE_POLLING_WAIT) */ +#endif /* I2C_SUPPORTS_CALLBACKS */ + +#endif /* STM32_I2C_USE_I2C */ + +#if STM32_I2C_USE_I2C2 + i2cObjectInit(&I2CD2); + I2CD2.id_i2c = I2C2; + +#if I2C_SUPPORTS_CALLBACKS +#if !(STM32_I2C_I2C2_USE_POLLING_WAIT) + I2CD2.timer = &(STM32_I2C_I2C2_USE_GPT_TIM); + I2CD2.timer_cfg = &i2c2gptcfg; +#endif /* !(STM32_I2C_I2C2_USE_POLLING_WAIT) */ +#endif /* I2C_SUPPORTS_CALLBACKS */ + +#endif /* STM32_I2C_USE_I2C2 */ +} + +/** + * @brief Configures and activates the I2C peripheral. + * + * @param[in] i2cp pointer to the @p I2CDriver object + */ +void i2c_lld_start(I2CDriver *i2cp) { + if (i2cp->id_state == I2C_STOP) { /* If in stopped state then enables the I2C clock.*/ +#if STM32_I2C_USE_I2C1 + if (&I2CD1 == i2cp) { +#if I2C_SUPPORTS_CALLBACKS + NVICEnableVector(I2C1_EV_IRQn, + CORTEX_PRIORITY_MASK(STM32_I2C_I2C1_IRQ_PRIORITY)); +#endif /* I2C_SUPPORTS_CALLBACKS */ + NVICEnableVector(I2C1_ER_IRQn, + CORTEX_PRIORITY_MASK(STM32_I2C_I2C1_IRQ_PRIORITY)); + rccEnableI2C1(FALSE); + } +#endif +#if STM32_I2C_USE_I2C2 + if (&I2CD2 == i2cp) { +#if I2C_SUPPORTS_CALLBACKS + NVICEnableVector(I2C2_EV_IRQn, + CORTEX_PRIORITY_MASK(STM32_I2C_I2C1_IRQ_PRIORITY)); +#endif /* I2C_SUPPORTS_CALLBACKS */ + NVICEnableVector(I2C2_ER_IRQn, + CORTEX_PRIORITY_MASK(STM32_I2C_I2C1_IRQ_PRIORITY)); + rccEnableI2C2(FALSE); + } +#endif + } + + i2cp->id_i2c->CR1 = I2C_CR1_SWRST; /* reset i2c peripherial */ + i2cp->id_i2c->CR1 = 0; + i2c_lld_set_clock(i2cp); + i2c_lld_set_opmode(i2cp); + i2cp->id_i2c->CR1 |= 1; /* enable interface */ +} + +void i2c_lld_reset(I2CDriver *i2cp){ + chDbgCheck((i2cp->id_state == I2C_STOP)||(i2cp->id_state == I2C_READY), + "i2c_lld_reset: invalid state"); + + rccResetI2C1(); +} + + +/** + * @brief Set clock speed. + * + * @param[in] i2cp pointer to the @p I2CDriver object + */ +void i2c_lld_set_clock(I2CDriver *i2cp) { + volatile uint16_t regCCR, regCR2, freq, clock_div; + volatile uint16_t pe_bit_saved; + int32_t clock_speed = i2cp->id_config->clock_speed; + i2cdutycycle_t duty = i2cp->id_config->duty_cycle; + + chDbgCheck((i2cp != NULL) && (clock_speed > 0) && (clock_speed <= 4000000), + "i2c_lld_set_clock"); + + /************************************************************************** + * CR2 Configuration + */ + regCR2 = i2cp->id_i2c->CR2; /* Get the I2Cx CR2 value */ + regCR2 &= (uint16_t)~I2C_CR2_FREQ; /* Clear frequency FREQ[5:0] bits */ + freq = (uint16_t)(STM32_PCLK1 / 1000000); /* Set frequency bits depending on pclk1 value */ +#ifdef STM32F4XX + chDbgCheck((freq >= 2) && (freq <= 42), + "i2c_lld_set_clock() : Peripheral clock freq. out of range"); +#else + chDbgCheck((freq >= 2) && (freq <= 36), + "i2c_lld_set_clock() : Peripheral clock freq. out of range"); +#endif + regCR2 |= freq; + i2cp->id_i2c->CR2 = regCR2; + + /************************************************************************** + * CCR Configuration + */ + pe_bit_saved = (i2cp->id_i2c->CR1 & I2C_CR1_PE); + i2cp->id_i2c->CR1 &= (uint16_t)~I2C_CR1_PE; /* Disable the selected I2C peripheral to configure TRISE */ + regCCR = 0; /* Clear F/S, DUTY and CCR[11:0] bits */ + clock_div = I2C_CCR_CCR; + + if (clock_speed <= 100000) { /* Configure clock_div in standard mode */ + chDbgAssert(duty == STD_DUTY_CYCLE, + "i2c_lld_set_clock(), #1", + "Invalid standard mode duty cycle"); + clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 2)); /* Standard mode clock_div calculate: Tlow/Thigh = 1/1 */ + if (clock_div < 0x04) clock_div = 0x04; /* Test if CCR value is under 0x4, and set the minimum allowed value */ + regCCR |= (clock_div & I2C_CCR_CCR); /* Set clock_div value for standard mode */ + i2cp->id_i2c->TRISE = freq + 1; /* Set Maximum Rise Time for standard mode */ + } + else if(clock_speed <= 400000) { /* Configure clock_div in fast mode */ + chDbgAssert((duty == FAST_DUTY_CYCLE_2) || + (duty == FAST_DUTY_CYCLE_16_9), + "i2c_lld_set_clock(), #2", + "Invalid fast mode duty cycle"); + if(duty == FAST_DUTY_CYCLE_2) { + clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 3)); /* Fast mode clock_div calculate: Tlow/Thigh = 2/1 */ + } + else if(duty == FAST_DUTY_CYCLE_16_9) { + clock_div = (uint16_t)(STM32_PCLK1 / (clock_speed * 25)); /* Fast mode clock_div calculate: Tlow/Thigh = 16/9 */ + regCCR |= I2C_CCR_DUTY; /* Set DUTY bit */ + } + if(clock_div < 0x01) clock_div = 0x01; /* Test if CCR value is under 0x1, and set the minimum allowed value */ + regCCR |= (I2C_CCR_FS | (clock_div & I2C_CCR_CCR)); /* Set clock_div value and F/S bit for fast mode*/ + i2cp->id_i2c->TRISE = (freq * 300 / 1000) + 1; /* Set Maximum Rise Time for fast mode */ + } + chDbgAssert((clock_div <= I2C_CCR_CCR), + "i2c_lld_set_clock(), #3", "Too low clock clock speed selected"); + + i2cp->id_i2c->CCR = regCCR; /* Write to I2Cx CCR */ + i2cp->id_i2c->CR1 |= pe_bit_saved; /* restore the I2C peripheral enabled state */ +} + +/** + * @brief Set operation mode of I2C hardware. + * + * @param[in] i2cp pointer to the @p I2CDriver object + */ +void i2c_lld_set_opmode(I2CDriver *i2cp) { + i2copmode_t opmode = i2cp->id_config->op_mode; + uint16_t regCR1; + + regCR1 = i2cp->id_i2c->CR1; /* Get the I2Cx CR1 value */ + switch(opmode){ + case OPMODE_I2C: + regCR1 &= (uint16_t)~(I2C_CR1_SMBUS|I2C_CR1_SMBTYPE); + break; + case OPMODE_SMBUS_DEVICE: + regCR1 |= I2C_CR1_SMBUS; + regCR1 &= (uint16_t)~(I2C_CR1_SMBTYPE); + break; + case OPMODE_SMBUS_HOST: + regCR1 |= (I2C_CR1_SMBUS|I2C_CR1_SMBTYPE); + break; + } + + i2cp->id_i2c->CR1 = regCR1; /* Write to I2Cx CR1 */ +} + +/** + * @brief Set own address. + * + * @param[in] i2cp pointer to the @p I2CDriver object + */ +void i2c_lld_set_own_address(I2CDriver *i2cp) { + /* TODO: dual address mode */ + + i2cp->id_i2c->OAR1 |= 1 << 14; + + if (&(i2cp->id_config->own_addr_10) == NULL){ /* only 7-bit address */ + i2cp->id_i2c->OAR1 &= (~I2C_OAR1_ADDMODE); + i2cp->id_i2c->OAR1 |= i2cp->id_config->own_addr_7 << 1; + } + else { + chDbgAssert((i2cp->id_config->own_addr_10 < 1024), + "i2c_lld_set_own_address(), #1", "10-bit address longer then 10 bit") + i2cp->id_i2c->OAR1 |= I2C_OAR1_ADDMODE; + i2cp->id_i2c->OAR1 |= i2cp->id_config->own_addr_10; + } +} + + +/** + * @brief Deactivates the I2C peripheral. + * + * @param[in] i2cp pointer to the @p I2CDriver object + */ +void i2c_lld_stop(I2CDriver *i2cp) { + if (i2cp->id_state == I2C_READY) { /* If in ready state then disables the I2C clock.*/ +#if STM32_I2C_USE_I2C1 + if (&I2CD1 == i2cp) { + NVICDisableVector(I2C1_EV_IRQn); + NVICDisableVector(I2C1_ER_IRQn); + rccDisableI2C1(FALSE); + } +#endif +#if STM32_I2C_USE_I2C2 + if (&I2CD2 == i2cp) { + NVICDisableVector(I2C2_EV_IRQn); + NVICDisableVector(I2C2_ER_IRQn); + rccDisableI2C2(FALSE); + } +#endif + } + + i2cp->id_state = I2C_STOP; +} + + +#if I2C_SUPPORTS_CALLBACKS +/** + * @brief Transmits data via the I2C bus as master. + * + * @param[in] i2cp pointer to the @p I2CDriver object + * @param[in] slave_addr Slave device address. Bits 0-9 contain slave + * device address. Bit 15 must be set to 1 if 10-bit + * addressing modes used. Otherwise keep it cleared. + * Bits 10-14 unused. + * @param[in] txbuf pointer to the transmit buffer + * @param[in] txbytes number of bytes to be transmitted + * @param[in] rxbuf pointer to the receive buffer + * @param[in] rxbytes number of bytes to be received + */ +void i2c_lld_master_transmit(I2CDriver *i2cp, uint16_t slave_addr, + uint8_t *txbuf, size_t txbytes, uint8_t *rxbuf, size_t rxbytes) { + + /* "waiting" for STOP bit routine*/ + #if STM32_I2C_I2C1_USE_POLLING_WAIT + uint32_t timeout = I2C_POLLING_TIMEOUT; + while((i2cp->id_i2c->CR1 & I2C_CR1_STOP) && timeout) + timeout--; + chDbgAssert((timeout > 0), "i2c_lld_master_transmit(), #1", "time to STOP is out"); + #else + chDbgAssert(!(i2cp->flags & I2C_FLG_TIMER_ARMED), "i2c_lld_master_transmit(), #1", "time to STOP is out"); + if ((i2cp->id_i2c->CR1 & I2C_CR1_STOP) && i2cp->timer != NULL && i2cp->timer_cfg != NULL){ + chSysLockFromIsr(); + gptStartOneShotI(i2cp->timer, I2C_STOP_GPT_TIMEOUT); + i2cp->flags |= I2C_FLG_TIMER_ARMED; + chSysUnlockFromIsr(); + return; + } + #endif /* STM32_I2C_I2C1_USE_POLLING_WAIT */ + + /* init driver fields */ + i2cp->slave_addr = slave_addr; + i2cp->txbytes = txbytes; + i2cp->rxbytes = rxbytes; + i2cp->txbuf = txbuf; + i2cp->rxbuf = rxbuf; + + /* init address fields */ + if(slave_addr & 0x8000){ /* 10-bit mode used */ + i2cp->slave_addr1 = ((slave_addr >>7) & 0x0006); /* add the two msb of 10-bit address to the header */ + i2cp->slave_addr1 |= 0xF0; /* add the header bits with LSB = 0 -> write */ + i2cp->slave_addr2 = slave_addr & 0x00FF; /* the remaining 8 bit of 10-bit address */ + } + else{ + i2cp->slave_addr1 = ((slave_addr <<1) & 0x00FE); /* LSB = 0 -> write */ + } + + /* setting flags and register bits */ + i2cp->flags = 0; + i2cp->errors = 0; + i2cp->id_i2c->CR1 &= ~I2C_CR1_POS; + i2cp->id_i2c->CR1 |= I2C_CR1_START; + i2cp->id_i2c->CR2 |= (I2C_CR2_ITERREN|I2C_CR2_ITEVTEN|I2C_CR2_ITBUFEN); /* enable ERR, EVT & BUF ITs */ +} + +/** + * @brief Receives data from the I2C bus. + * + * @param[in] i2cp pointer to the @p I2CDriver object + * @param[in] slave_addr Slave device address. Bits 0-9 contain slave + * device address. Bit 15 must be set to 1 if 10-bit + * addressing modes used. Otherwise keep it cleared. + * Bits 10-14 unused. + * @param[in] rxbuf pointer to the receive buffer + * @param[in] rxbytes number of bytes to be received + */ +void i2c_lld_master_receive(I2CDriver *i2cp, uint16_t slave_addr, + uint8_t *rxbuf, size_t rxbytes){ + + chDbgAssert((i2cp->id_i2c->SR1 + i2cp->id_i2c->SR2) == 0, + "i2c_lld_master_receive(), #1", + "some interrupt sources not clear"); + + /* "waiting" for STOP bit routine*/ + #if STM32_I2C_I2C1_USE_POLLING_WAIT + uint32_t timeout = I2C_POLLING_TIMEOUT; + while((i2cp->id_i2c->CR1 & I2C_CR1_STOP) && timeout) + timeout--; + chDbgAssert((timeout > 0), "i2c_lld_master_receive(), #1", "time to STOP is out"); + #else + chDbgAssert(!(i2cp->flags & I2C_FLG_TIMER_ARMED), "i2c_lld_master_receive(), #1", "time to STOP is out"); + if ((i2cp->id_i2c->CR1 & I2C_CR1_STOP) && i2cp->timer != NULL && i2cp->timer_cfg != NULL){ + chSysLockFromIsr(); + gptStartOneShotI(i2cp->timer, I2C_STOP_GPT_TIMEOUT); + i2cp->flags |= I2C_FLG_TIMER_ARMED; + chSysUnlockFromIsr(); + return; + } + #endif /* STM32_I2C_I2C1_USE_POLLING_WAIT */ + + /* init driver fields */ + i2cp->slave_addr = slave_addr; + i2cp->rxbytes = rxbytes; + i2cp->rxbuf = rxbuf; + + /* init address fields */ + if(slave_addr & 0x8000){ /* 10-bit mode used */ + i2cp->slave_addr1 = ((slave_addr >>7) & 0x0006); /* add the two msb of 10-bit address to the header */ + i2cp->slave_addr1 |= 0xF0; /* add the header bits (the LSB -> 1 will be add to second */ + i2cp->slave_addr2 = slave_addr & 0x00FF; /* the remaining 8 bit of 10-bit address */ + } + else{ + i2cp->slave_addr1 = ((slave_addr <<1) | 0x01); /* LSB = 1 -> receive */ + } + + /* setting flags and register bits */ + i2cp->flags |= I2C_FLG_MASTER_RECEIVER; + i2cp->errors = 0; + + i2cp->id_i2c->CR1 |= I2C_CR1_ACK; /* acknowledge returned */ + i2cp->id_i2c->CR1 &= ~I2C_CR1_POS; + + if(i2cp->rxbytes == 1) { /* Only one byte to be received */ + i2cp->flags |= I2C_FLG_1BTR; + } + else if(i2cp->rxbytes == 2) { /* Only two bytes to be received */ + i2cp->flags |= I2C_FLG_2BTR; + i2cp->id_i2c->CR1 |= I2C_CR1_POS; /* Acknowledge Position */ + } + + i2cp->id_i2c->CR1 |= I2C_CR1_START; /* send start bit */ + i2cp->id_i2c->CR2 |= (I2C_CR2_ITERREN|I2C_CR2_ITEVTEN|I2C_CR2_ITBUFEN); /* enable ERR, EVT & BUF ITs */ +} + + +/** + * @brief Realize read-though-write behavior. + * + * @param[in] i2cp pointer to the @p I2CDriver object + * + * @notapi + */ +void i2c_lld_master_transceive(I2CDriver *i2cp){ + + chDbgAssert((i2cp != NULL) && (i2cp->slave_addr1 != 0) &&\ + (i2cp->rxbytes > 0) && (i2cp->rxbuf != NULL), + "i2c_lld_master_transceive(), #1", + ""); + + i2cp->id_state = I2C_ACTIVE_TRANSCEIVE; + + /* "waiting" for START bit routine*/ + #if STM32_I2C_I2C1_USE_POLLING_WAIT + uint32_t timeout = I2C_POLLING_TIMEOUT; + while((i2cp->id_i2c->CR1 & I2C_CR1_START) && timeout); + timeout--; + chDbgAssert((timeout > 0), "i2c_lld_master_transceive(), #1", "time to START is out"); + #else + chDbgAssert(!(i2cp->flags & I2C_FLG_TIMER_ARMED), "i2c_lld_master_transceive(), #1", "time to START is out"); + if ((i2cp->id_i2c->CR1 & I2C_CR1_START) && i2cp->timer != NULL && i2cp->timer_cfg != NULL){ + chSysLockFromIsr(); + gptStartOneShotI(i2cp->timer, I2C_START_GPT_TIMEOUT); + i2cp->flags |= I2C_FLG_TIMER_ARMED; + chSysUnlockFromIsr(); + return; + } + #endif /* STM32_I2C_I2C1_USE_POLLING_WAIT */ + + /* init address fields */ + if(i2cp->slave_addr & 0x8000){ /* 10-bit mode used */ + i2cp->slave_addr1 = ((i2cp->slave_addr >>7) & 0x0006);/* add the two msb of 10-bit address to the header */ + i2cp->slave_addr1 |= 0xF0; /* add the header bits (the LSB -> 1 will be add to second */ + i2cp->slave_addr2 = i2cp->slave_addr & 0x00FF; /* the remaining 8 bit of 10-bit address */ + } + else{ + i2cp->slave_addr1 |= 0x01; + } + + /* setting flags and register bits */ + i2cp->flags |= I2C_FLG_MASTER_RECEIVER; + i2cp->errors = 0; + i2cp->id_i2c->CR1 |= I2C_CR1_ACK; /* acknowledge returned */ + i2cp->id_i2c->CR1 &= ~I2C_CR1_POS; + + if(i2cp->rxbytes == 1) { /* Only one byte to be received */ + i2cp->flags |= I2C_FLG_1BTR; + } + else if(i2cp->rxbytes == 2) { /* Only two bytes to be received */ + i2cp->flags |= I2C_FLG_2BTR; + i2cp->id_i2c->CR1 |= I2C_CR1_POS; /* Acknowledge Position */ + } + + i2cp->id_i2c->CR2 |= (I2C_CR2_ITERREN|I2C_CR2_ITEVTEN|I2C_CR2_ITBUFEN); /* enable ERR, EVT & BUF ITs */ +} + +#else /*I2C_SUPPORTS_CALLBACKS*/ + +/** + * @brief Synchronously transmits data via the I2C bus as master. + * + * @param[in] i2cp pointer to the @p I2CDriver object + * @param[in] slave_addr Slave device address. Bits 0-9 contain slave + * device address. Bit 15 must be set to 1 if 10-bit + * addressing modes used. Otherwise keep it cleared. + * Bits 10-14 unused. + * @param[in] txbuf pointer to the transmit buffer + * @param[in] txbytes number of bytes to be transmitted + * @param[in] rxbuf pointer to the receive buffer + * @param[in] rxbytes number of bytes to be received + */ +void i2c_lld_master_transmit(I2CDriver *i2cp, uint16_t slave_addr, + uint8_t *txbuf, size_t txbytes, uint8_t *rxbuf, size_t rxbytes) { + + /* init driver fields */ + i2cp->slave_addr = slave_addr; + i2cp->txbytes = txbytes; + i2cp->rxbytes = rxbytes; + i2cp->txbuf = txbuf; + i2cp->rxbuf = rxbuf; + + /* init address fields */ + if(slave_addr & 0x8000){ /* 10-bit mode used */ + i2cp->slave_addr1 = ((slave_addr >>7) & 0x0006); /* add the two msb of 10-bit address to the header */ + i2cp->slave_addr1 |= 0xF0; /* add the header bits with LSB = 0 -> write */ + i2cp->slave_addr2 = slave_addr & 0x00FF; /* the remaining 8 bit of 10-bit address */ + } + else{ + i2cp->slave_addr1 = ((slave_addr <<1) & 0x00FE); /* LSB = 0 -> write */ + } + + i2cp->flags = 0; + i2cp->errors = 0; + i2cp->id_i2c->CR1 &= ~I2C_CR1_POS; + i2cp->id_i2c->CR2 &= ~I2C_CR2_ITEVTEN; /* disable event interrupts */ + i2cp->id_i2c->CR2 |= I2C_CR2_ITERREN; /* enable error interrupts */ + + i2cp->id_i2c->CR1 |= I2C_CR1_START; + while (!(i2cp->id_i2c->SR1 & I2C_SR1_SB)) + ; + i2cp->id_i2c->DR = i2cp->slave_addr1; + while (!(i2cp->id_i2c->SR1 & I2C_SR1_ADDR)) + ; + while (!(i2cp->id_i2c->SR2 & I2C_SR2_BUSY)) + ; + i2cp->id_i2c->DR = *txbuf; + txbuf++; + i2cp->txbytes--; + while(i2cp->txbytes > 0){ + while(!(i2cp->id_i2c->SR1 & I2C_SR1_BTF)) + ; + i2cp->id_i2c->DR = *txbuf; + txbuf++; + i2cp->txbytes--; + } + while(!(i2cp->id_i2c->SR1 & I2C_SR1_BTF)) + ; + if(rxbytes == 0){ + i2cp->id_i2c->CR1 |= I2C_CR1_STOP; + while (i2cp->id_i2c->CR1 & I2C_CR1_STOP) + ; + } + else{ + i2c_lld_master_receive(i2cp, slave_addr, rxbuf, rxbytes); + } +} + + +/** + * @brief Synchronously receives data from the I2C bus. + * + * @param[in] i2cp pointer to the @p I2CDriver object + * @param[in] slave_addr Slave device address. Bits 0-9 contain slave + * device address. Bit 15 must be set to 1 if 10-bit + * addressing modes used. Otherwise keep it cleared. + * Bits 10-14 unused. + * @param[in] rxbuf pointer to the receive buffer + * @param[in] rxbytes number of bytes to be received + */ +void i2c_lld_master_receive(I2CDriver *i2cp, uint16_t slave_addr, + uint8_t *rxbuf, size_t rxbytes){ + + /* init driver fields */ + i2cp->slave_addr = slave_addr; + i2cp->rxbytes = rxbytes; + i2cp->rxbuf = rxbuf; + + /* init address fields */ + if(slave_addr & 0x8000){ /* 10-bit mode used */ + i2cp->slave_addr1 = ((slave_addr >>7) & 0x0006); /* add the two msb of 10-bit address to the header */ + i2cp->slave_addr1 |= 0xF0; /* add the header bits (the LSB -> 1 will be add to second */ + i2cp->slave_addr2 = slave_addr & 0x00FF; /* the remaining 8 bit of 10-bit address */ + } + else{ + i2cp->slave_addr1 = ((slave_addr <<1) | 0x01); /* LSB = 1 -> receive */ + } + + + /* setting flags and register bits */ + i2cp->flags = 0; + i2cp->errors = 0; + i2cp->id_i2c->CR1 &= ~I2C_CR1_POS; + i2cp->id_i2c->CR2 &= ~I2C_CR2_ITEVTEN; /* disable event interrupts */ + i2cp->id_i2c->CR2 |= I2C_CR2_ITERREN; /* enable error interrupts */ + + i2cp->id_i2c->CR1 |= I2C_CR1_START; + while (!(i2cp->id_i2c->SR1 & I2C_SR1_SB)) + ; + + i2cp->id_i2c->DR = i2cp->slave_addr1; + while (!(i2cp->id_i2c->SR1 & I2C_SR1_ADDR)) + ; + + if(i2cp->rxbytes >= 3){ /* more than 2 bytes receiving procedure */ + while(!(i2cp->id_i2c->SR2 & I2C_SR2_BUSY)) /* to clear ADDR bit */ + ; + while(i2cp->rxbytes > 3){ + while(!(i2cp->id_i2c->SR1 & I2C_SR1_BTF)) + ; + *rxbuf = i2cp->id_i2c->DR; + rxbuf++; + i2cp->rxbytes--; + } + while(!(i2cp->id_i2c->SR1 & I2C_SR1_BTF)) /* stopping procedure */ + ; + i2cp->id_i2c->CR1 &= ~I2C_CR1_ACK; + chSysLock(); + i2cp->id_i2c->CR1 |= I2C_CR1_STOP; + *rxbuf = i2cp->id_i2c->DR; + rxbuf++; + i2cp->rxbytes--; + chSysUnlock(); + while(!(i2cp->id_i2c->SR1 & I2C_SR1_RXNE)) + ; + *rxbuf = i2cp->id_i2c->DR; + rxbuf++; + i2cp->rxbytes--; + while (i2cp->id_i2c->CR1 & I2C_CR1_STOP) + ; + i2cp->id_i2c->CR1 |= I2C_CR1_ACK; + } + else{ /* 1 or 2 bytes receiving procedure */ + if(i2cp->rxbytes == 2){ + i2cp->id_i2c->CR1 |= I2C_CR1_POS; + chSysLock(); + while(!(i2cp->id_i2c->SR2 & I2C_SR2_BUSY)) /* to clear ADDR bit */ + ; + i2cp->id_i2c->CR1 &= ~I2C_CR1_ACK; + chSysUnlock(); + while(!(i2cp->id_i2c->SR1 & I2C_SR1_BTF)) + ; + chSysLock(); + i2cp->id_i2c->CR1 |= I2C_CR1_STOP; + *rxbuf = i2cp->id_i2c->DR; + rxbuf++; + i2cp->rxbytes--; + chSysUnlock(); + *rxbuf = i2cp->id_i2c->DR; + rxbuf++; + i2cp->rxbytes--; + while (i2cp->id_i2c->CR1 & I2C_CR1_STOP) + ; + i2cp->id_i2c->CR1 &= ~I2C_CR1_POS; + i2cp->id_i2c->CR1 |= I2C_CR1_ACK; + } + else{ /* 1 byte */ + i2cp->id_i2c->CR1 &= ~I2C_CR1_ACK; + chSysLock(); + while(!(i2cp->id_i2c->SR2 & I2C_SR2_BUSY)) /* to clear ADDR bit */ + ; + i2cp->id_i2c->CR1 |= I2C_CR1_STOP; + chSysUnlock(); + while(!(i2cp->id_i2c->SR1 & I2C_SR1_RXNE)) + ; + *rxbuf = i2cp->id_i2c->DR; + rxbuf++; + i2cp->rxbytes--; + while (i2cp->id_i2c->CR1 & I2C_CR1_STOP) + ; + i2cp->id_i2c->CR1 |= I2C_CR1_ACK; + } + } +} +#endif /* I2C_SUPPORTS_CALLBACKS */ + +#undef rxBuffp +#undef txBuffp + +#endif /* HAL_USE_I2C */ diff --git a/os/hal/platforms/STM32/I2Cv1/i2c_lld.h b/os/hal/platforms/STM32/I2Cv1/i2c_lld.h new file mode 100644 index 000000000..81a9f62dc --- /dev/null +++ b/os/hal/platforms/STM32/I2Cv1/i2c_lld.h @@ -0,0 +1,318 @@ +/* + ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010, + 2011 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +/** + * @file STM32/i2c_lld.h + * @brief STM32 I2C subsystem low level driver header. + * @addtogroup I2C + * @{ + */ + +#ifndef _I2C_LLD_H_ +#define _I2C_LLD_H_ + +#if HAL_USE_I2C || defined(__DOXYGEN__) + +/*===========================================================================*/ +/* Driver constants. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver pre-compile time settings. */ +/*===========================================================================*/ + +/** + * @name Configuration options + * @{ + */ +/** + * @brief Switch between callback based and synchronouse driver. + * @note The default is synchronouse. + */ +#if !defined(I2C_SUPPORTS_CALLBACKS) || defined(__DOXYGEN__) +#define I2C_SUPPORTS_CALLBACKS TRUE +#endif + +/** + * @brief I2C1 driver synchronization choice between GPT and polling. + * @note The default is polling wait. + */ +#if !defined(STM32_I2C_I2C1_USE_GPT_TIM) || \ + !defined(STM32_I2C_I2C1_USE_POLLING_WAIT) || \ + defined(__DOXYGEN__) +#define STM32_I2C_I2C1_USE_POLLING_WAIT TRUE +#endif + +/** + * @brief I2C2 driver synchronization choice between GPT and polling. + * @note The default is polling wait. + */ +#if !defined(STM32_I2C_I2C2_USE_GPT_TIM) || \ + !defined(STM32_I2C_I2C2_USE_POLLING_WAIT) || \ + defined(__DOXYGEN__) +#define STM32_I2C_I2C2_USE_POLLING_WAIT TRUE +#endif + +/** + * @brief I2C1 driver enable switch. + * @details If set to @p TRUE the support for I2C1 is included. + * @note The default is @p TRUE. + */ +#if !defined(STM32_I2C_USE_I2C1) || defined(__DOXYGEN__) +#define STM32_I2C_USE_I2C1 TRUE +#endif + +/** + * @brief I2C2 driver enable switch. + * @details If set to @p TRUE the support for I2C2 is included. + * @note The default is @p TRUE. + */ +#if !defined(STM32_I2C_USE_I2C2) || defined(__DOXYGEN__) +#define STM32_I2C_USE_I2C2 TRUE +#endif + +/** + * @brief I2C1 interrupt priority level setting. + * @note @p BASEPRI_KERNEL >= @p STM32_I2C_I2C1_IRQ_PRIORITY > @p PRIORITY_PENDSV. + */ +#if !defined(STM32_I2C_I2C1_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define STM32_I2C_I2C1_IRQ_PRIORITY 0xA0 +#endif + +/** + * @brief I2C2 interrupt priority level setting. + * @note @p BASEPRI_KERNEL >= @p STM32_I2C_I2C2_IRQ_PRIORITY > @p PRIORITY_PENDSV. + */ +#if !defined(STM32_I2C_I2C2_IRQ_PRIORITY) || defined(__DOXYGEN__) +#define STM32_I2C_I2C2_IRQ_PRIORITY 0xA0 +#endif +/** @} */ + +/*===========================================================================*/ +/* Derived constants and error checks. */ +/*===========================================================================*/ + +/** @brief EV5 */ +#define I2C_EV5_MASTER_MODE_SELECT ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY)<< 16)|I2C_SR1_SB)) /* BUSY, MSL and SB flag */ +/** @brief EV6 */ +#define I2C_EV6_MASTER_TRA_MODE_SELECTED ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY|I2C_SR2_TRA)<< 16)|I2C_SR1_ADDR|I2C_SR1_TXE)) /* BUSY, MSL, ADDR, TXE and TRA flags */ +#define I2C_EV6_MASTER_REC_MODE_SELECTED ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY)<< 16)|I2C_SR1_ADDR)) /* BUSY, MSL and ADDR flags */ +/** @brief EV7 */ +#define I2C_EV7_MASTER_REC_BYTE_RECEIVED ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY)<< 16)|I2C_SR1_RXNE)) /* BUSY, MSL and RXNE flags */ +#define I2C_EV7_MASTER_REC_BYTE_QUEUED ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY)<< 16)|I2C_SR1_BTF|I2C_SR1_RXNE)) /* BUSY, MSL, RXNE and BTF flags*/ +/** @brief EV8 */ +#define I2C_EV8_MASTER_BYTE_TRANSMITTING ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY|I2C_SR2_TRA)<< 16)|I2C_SR1_TXE)) /* TRA, BUSY, MSL, TXE flags */ +/** @brief EV8_2 */ +#define I2C_EV8_2_MASTER_BYTE_TRANSMITTED ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY|I2C_SR2_TRA)<< 16)|I2C_SR1_BTF|I2C_SR1_TXE)) /* TRA, BUSY, MSL, TXE and BTF flags */ +/** @brief EV9 */ +#define I2C_EV9_MASTER_ADDR_10BIT ((uint32_t)(((I2C_SR2_MSL|I2C_SR2_BUSY)<< 16)|I2C_SR1_ADD10)) /* BUSY, MSL and ADD10 flags */ +#define I2C_EV_MASK 0x00FFFFFF /* First byte zeroed because there is no need of PEC register part from SR2 */ + +#define I2C_FLG_1BTR 0x01 /* Single byte to be received and processed */ +#define I2C_FLG_2BTR 0x02 /* Two bytes to be received and processed */ +#define I2C_FLG_3BTR 0x04 /* Last three received bytes to be processed */ +#define I2C_FLG_MASTER_RECEIVER 0x10 +#define I2C_FLG_HEADER_SENT 0x80 +#define I2C_FLG_TIMER_ARMED 0x40 /* Used to check locks on the bus */ + +#define EV6_SUBEV_MASK (I2C_FLG_1BTR|I2C_FLG_2BTR|I2C_FLG_MASTER_RECEIVER) +#define EV7_SUBEV_MASK (I2C_FLG_2BTR|I2C_FLG_3BTR|I2C_FLG_MASTER_RECEIVER) + +#define I2C_EV6_1_MASTER_REC_2BTR_MODE_SELECTED (I2C_FLG_2BTR|I2C_FLG_MASTER_RECEIVER) +#define I2C_EV6_3_MASTER_REC_1BTR_MODE_SELECTED (I2C_FLG_1BTR|I2C_FLG_MASTER_RECEIVER) +#define I2C_EV7_2_MASTER_REC_3BYTES_TO_PROCESS (I2C_FLG_3BTR|I2C_FLG_MASTER_RECEIVER) +#define I2C_EV7_3_MASTER_REC_2BYTES_TO_PROCESS (I2C_FLG_2BTR|I2C_FLG_MASTER_RECEIVER) + +/*===========================================================================*/ +/* Driver data structures and types. */ +/*===========================================================================*/ + +/** + * @brief I2C Driver condition flags type. + */ +typedef uint32_t i2cflags_t; + +typedef enum { + OPMODE_I2C = 1, + OPMODE_SMBUS_DEVICE = 2, + OPMODE_SMBUS_HOST = 3, +} i2copmode_t; + +typedef enum { + STD_DUTY_CYCLE = 1, + FAST_DUTY_CYCLE_2 = 2, + FAST_DUTY_CYCLE_16_9 = 3, +} i2cdutycycle_t; + +/** + * @brief Driver configuration structure. + */ +typedef struct { + i2copmode_t op_mode; /**< @brief Specifies the I2C mode.*/ + uint32_t clock_speed; /**< @brief Specifies the clock frequency. Must be set to a value lower than 400kHz */ + i2cdutycycle_t duty_cycle; /**< @brief Specifies the I2C fast mode duty cycle */ + uint8_t own_addr_7; /**< @brief Specifies the first device 7-bit own address. */ + uint16_t own_addr_10; /**< @brief Specifies the second part of device own address in 10-bit mode. Set to NULL if not used. */ + uint8_t nbit_own_addr; /**< @brief Specifies if 7-bit or 10-bit address is acknowledged */ +} I2CConfig; + + +/** + * @brief Type of a structure representing an I2C driver. + */ +typedef struct I2CDriver I2CDriver; + +/** + * @brief Type of a structure representing an I2C slave config. + */ +typedef struct I2CSlaveConfig I2CSlaveConfig; + +/** + * @brief Structure representing an I2C driver. + */ +struct I2CDriver{ + /** + * @brief Driver state. + */ + i2cstate_t id_state; + +#if I2C_USE_WAIT + /** + * @brief Thread waiting for I/O completion. + */ + Thread *id_thread; +#endif /* I2C_USE_WAIT */ +#if I2C_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__) +#if CH_USE_MUTEXES || defined(__DOXYGEN__) + /** + * @brief Mutex protecting the bus. + */ + Mutex id_mutex; +#elif CH_USE_SEMAPHORES + Semaphore id_semaphore; +#endif +#endif /* I2C_USE_MUTUAL_EXCLUSION */ + + /** + * @brief Current configuration data. + */ + const I2CConfig *id_config; + /** + * @brief Current slave configuration data. + */ + const I2CSlaveConfig *id_slave_config; + + __IO size_t txbytes; /*!< @brief Number of bytes to be transmitted. */ + __IO size_t rxbytes; /*!< @brief Number of bytes to be received. */ + uint8_t *rxbuf; /*!< @brief Pointer to receive buffer. */ + uint8_t *txbuf; /*!< @brief Pointer to transmit buffer.*/ + uint8_t *rxbuff_p; /*!< @brief Pointer to the current byte in slave rx buffer. */ + uint8_t *txbuff_p; /*!< @brief Pointer to the current byte in slave tx buffer. */ + + __IO i2cflags_t errors; /*!< @brief Error flags.*/ + __IO i2cflags_t flags; /*!< @brief State flags.*/ + + uint16_t slave_addr; /*!< @brief Current slave address. */ + uint8_t slave_addr1;/*!< @brief 7-bit address of the slave with r\w bit.*/ + uint8_t slave_addr2;/*!< @brief Uses in 10-bit address mode. */ + +#if CH_USE_EVENTS + EventSource sevent; /*!< @brief Status Change @p EventSource.*/ +#endif + + /*********** End of the mandatory fields. **********************************/ + + /** + * @brief Pointer to the I2Cx registers block. + */ + I2C_TypeDef *id_i2c; + +#if !(STM32_I2C_I2C1_USE_POLLING_WAIT) + /* TODO: capability to switch this GPT fields off */ + /** + * @brief Timer for waiting STOP condition on the bus. + * @details This is workaround for STM32 buggy I2C cell. + */ + GPTDriver *timer; + + /** + * @brief Config for workaround timer. + */ + const GPTConfig *timer_cfg; +#endif /* !(STM32_I2C_I2C1_USE_POLLING_WAIT) */ +}; + + +/*===========================================================================*/ +/* Driver macros. */ +/*===========================================================================*/ + +#define i2c_lld_bus_is_busy(i2cp) \ + (i2cp->id_i2c->SR2 & I2C_SR2_BUSY) + + +/* Wait until BUSY flag is reset: a STOP has been generated on the bus + * signaling the end of transmission. Normally this wait function + * does not block thread, only if slave not response it does. + */ +#define i2c_lld_wait_bus_free(i2cp) { \ + uint32_t tmo = 0xfffff; \ + while((i2cp->id_i2c->SR2 & I2C_SR2_BUSY) && tmo--) \ + ; \ +} + +/*===========================================================================*/ +/* External declarations. */ +/*===========================================================================*/ + +/** @cond never*/ +#if STM32_I2C_USE_I2C1 +extern I2CDriver I2CD1; +#endif + +#if STM32_I2C_USE_I2C2 +extern I2CDriver I2CD2; +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +void i2c_lld_init(void); +void i2c_lld_reset(I2CDriver *i2cp); +void i2c_lld_set_clock(I2CDriver *i2cp); +void i2c_lld_set_opmode(I2CDriver *i2cp); +void i2c_lld_set_own_address(I2CDriver *i2cp); +void i2c_lld_start(I2CDriver *i2cp); +void i2c_lld_stop(I2CDriver *i2cp); +void i2c_lld_master_transmit(I2CDriver *i2cp, uint16_t slave_addr, + uint8_t *txbuf, size_t txbytes, uint8_t *rxbuf, size_t rxbytes); +void i2c_lld_master_receive(I2CDriver *i2cp, uint16_t slave_addr, + uint8_t *rxbuf, size_t rxbytes); +void i2c_lld_master_transceive(I2CDriver *i2cp); + +#ifdef __cplusplus +} +#endif +/** @endcond*/ + +#endif /* CH_HAL_USE_I2C */ + +#endif /* _I2C_LLD_H_ */ -- cgit v1.2.3