From 51b16c7a2dbd4f3d0be30049a4dad702961bfb8b Mon Sep 17 00:00:00 2001
From: gdisirio <gdisirio@35acf78f-673a-0410-8e92-d51de3d6d3f4>
Date: Sat, 10 Aug 2013 14:58:16 +0000
Subject: git-svn-id:
 svn://svn.code.sf.net/p/chibios/svn/branches/kernel_3_dev@6126
 35acf78f-673a-0410-8e92-d51de3d6d3f4

---
 os/hal/boards/OLIMEX_STM32_P103/board.h | 156 ++++++++++++++++++++++++++++++++
 1 file changed, 156 insertions(+)
 create mode 100644 os/hal/boards/OLIMEX_STM32_P103/board.h

(limited to 'os/hal/boards/OLIMEX_STM32_P103/board.h')

diff --git a/os/hal/boards/OLIMEX_STM32_P103/board.h b/os/hal/boards/OLIMEX_STM32_P103/board.h
new file mode 100644
index 000000000..58f020bcc
--- /dev/null
+++ b/os/hal/boards/OLIMEX_STM32_P103/board.h
@@ -0,0 +1,156 @@
+/*
+    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * Setup for the Olimex STM32-P103 proto board.
+ */
+
+/*
+ * Board identifier.
+ */
+#define BOARD_OLIMEX_STM32_P103
+#define BOARD_NAME              "Olimex STM32-P103"
+
+/*
+ * Board frequencies.
+ */
+#define STM32_LSECLK            32768
+#define STM32_HSECLK            8000000
+
+/*
+ * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
+ */
+#define STM32F10X_MD
+
+/*
+ * IO pins assignments.
+ */
+#define GPIOA_BUTTON            0
+#define GPIOA_SPI1NSS           4
+
+#define GPIOB_SPI2NSS           12
+
+#define GPIOC_USB_P             4
+#define GPIOC_MMCWP             6
+#define GPIOC_MMCCP             7
+#define GPIOC_CAN_CNTL          10
+#define GPIOC_USB_DISC          11
+#define GPIOC_LED               12
+
+/*
+ * I/O ports initial setup, this configuration is established soon after reset
+ * in the initialization code.
+ *
+ * The digits have the following meaning:
+ *   0 - Analog input.
+ *   1 - Push Pull output 10MHz.
+ *   2 - Push Pull output 2MHz.
+ *   3 - Push Pull output 50MHz.
+ *   4 - Digital input.
+ *   5 - Open Drain output 10MHz.
+ *   6 - Open Drain output 2MHz.
+ *   7 - Open Drain output 50MHz.
+ *   8 - Digital input with PullUp or PullDown resistor depending on ODR.
+ *   9 - Alternate Push Pull output 10MHz.
+ *   A - Alternate Push Pull output 2MHz.
+ *   B - Alternate Push Pull output 50MHz.
+ *   C - Reserved.
+ *   D - Alternate Open Drain output 10MHz.
+ *   E - Alternate Open Drain output 2MHz.
+ *   F - Alternate Open Drain output 50MHz.
+ * Please refer to the STM32 Reference Manual for details.
+ */
+
+/*
+ * Port A setup.
+ * Everything input with pull-up except:
+ * PA0  - Normal input      (BUTTON).
+ * PA2  - Alternate output  (USART2 TX).
+ * PA3  - Normal input      (USART2 RX).
+ * PA11 - Normal input      (USB DM).
+ * PA12 - Normal input      (USB DP).
+ */
+#define VAL_GPIOACRL            0x88884B84      /*  PA7...PA0 */
+#define VAL_GPIOACRH            0x88844888      /* PA15...PA8 */
+#define VAL_GPIOAODR            0xFFFFFFFF
+
+/*
+ * Port B setup.
+ * Everything input with pull-up except:
+ * PB13 - Alternate output  (MMC SPI2 SCK).
+ * PB14 - Normal input      (MMC SPI2 MISO).
+ * PB15 - Alternate output  (MMC SPI2 MOSI).
+ */
+#define VAL_GPIOBCRL            0x88888888      /*  PB7...PB0 */
+#define VAL_GPIOBCRH            0xB4B88888      /* PB15...PB8 */
+#define VAL_GPIOBODR            0xFFFFFFFF
+
+/*
+ * Port C setup.
+ * Everything input with pull-up except:
+ * PC4  - Normal input because there is an external resistor.
+ * PC6  - Normal input because there is an external resistor.
+ * PC7  - Normal input because there is an external resistor.
+ * PC10 - Push Pull output (CAN CNTRL).
+ * PC11 - Push Pull output (USB DISC).
+ * PC12 - Push Pull output (LED).
+ */
+#define VAL_GPIOCCRL            0x44848888      /*  PC7...PC0 */
+#define VAL_GPIOCCRH            0x88833388      /* PC15...PC8 */
+#define VAL_GPIOCODR            0xFFFFFFFF
+
+/*
+ * Port D setup.
+ * Everything input with pull-up except:
+ * PD0  - Normal input (XTAL).
+ * PD1  - Normal input (XTAL).
+ */
+#define VAL_GPIODCRL            0x88888844      /*  PD7...PD0 */
+#define VAL_GPIODCRH            0x88888888      /* PD15...PD8 */
+#define VAL_GPIODODR            0xFFFFFFFF
+
+/*
+ * Port E setup.
+ * Everything input with pull-up except:
+ */
+#define VAL_GPIOECRL            0x88888888      /*  PE7...PE0 */
+#define VAL_GPIOECRH            0x88888888      /* PE15...PE8 */
+#define VAL_GPIOEODR            0xFFFFFFFF
+
+/*
+ * USB bus activation macro, required by the USB driver.
+ */
+#define usb_lld_connect_bus(usbp) palClearPad(GPIOC, GPIOC_USB_DISC)
+
+/*
+ * USB bus de-activation macro, required by the USB driver.
+ */
+#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOC, GPIOC_USB_DISC)
+
+#if !defined(_FROM_ASM_)
+#ifdef __cplusplus
+extern "C" {
+#endif
+  void boardInit(void);
+#ifdef __cplusplus
+}
+#endif
+#endif /* _FROM_ASM_ */
+
+#endif /* _BOARD_H_ */
-- 
cgit v1.2.3