From 51b16c7a2dbd4f3d0be30049a4dad702961bfb8b Mon Sep 17 00:00:00 2001
From: gdisirio <gdisirio@35acf78f-673a-0410-8e92-d51de3d6d3f4>
Date: Sat, 10 Aug 2013 14:58:16 +0000
Subject: git-svn-id:
 svn://svn.code.sf.net/p/chibios/svn/branches/kernel_3_dev@6126
 35acf78f-673a-0410-8e92-d51de3d6d3f4

---
 os/hal/boards/EA_LPCXPRESSO_BB_1343/board.c | 59 +++++++++++++++++++++++++++++
 1 file changed, 59 insertions(+)
 create mode 100644 os/hal/boards/EA_LPCXPRESSO_BB_1343/board.c

(limited to 'os/hal/boards/EA_LPCXPRESSO_BB_1343/board.c')

diff --git a/os/hal/boards/EA_LPCXPRESSO_BB_1343/board.c b/os/hal/boards/EA_LPCXPRESSO_BB_1343/board.c
new file mode 100644
index 000000000..d25d93d20
--- /dev/null
+++ b/os/hal/boards/EA_LPCXPRESSO_BB_1343/board.c
@@ -0,0 +1,59 @@
+/*
+    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+
+/**
+ * @brief   PAL setup.
+ * @details Digital I/O ports static configuration as defined in @p board.h.
+ *          This variable is used by the HAL when initializing the PAL driver.
+ */
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+const PALConfig pal_default_config = {
+ {VAL_GPIO0DATA, VAL_GPIO0DIR},
+ {VAL_GPIO1DATA, VAL_GPIO1DIR},
+ {VAL_GPIO2DATA, VAL_GPIO2DIR},
+ {VAL_GPIO3DATA, VAL_GPIO3DIR},
+};
+#endif
+
+/*
+ * Early initialization code.
+ * This initialization must be performed just after stack setup and before
+ * any other initialization.
+ */
+void __early_init(void) {
+
+  LPC13xx_clock_init();
+}
+
+/*
+ * Board-specific initialization code.
+ */
+void boardInit(void) {
+
+  /*
+   * Extra, board-specific, initializations.
+   * NOTE: PIO1_2 is associated also to the JTAG, if you need to use JTAG
+   *       you must comment that line first.
+   */
+  LPC_IOCON->PIO0_7 = 0xC0;             /* Disables pull-up on LED2 output. */
+  LPC_IOCON->R_PIO1_2 = 0xC1;           /* Disables pull-up on LED3B output
+                                           and makes it GPIO1_2.            */
+  LPC_IOCON->PIO1_9 = 0xC0;             /* Disables pull-up on LED3R output.*/
+  LPC_IOCON->PIO1_10 = 0xC0;            /* Disables pull-up on LED3G output.*/
+}
-- 
cgit v1.2.3