From b693c748d55f60e5380e26efac95d31a46f1c169 Mon Sep 17 00:00:00 2001 From: Theodore Ateba Date: Fri, 21 Jul 2017 09:49:36 +0000 Subject: Add a readme file to the DIGISPARK ATiny 167 NIL demo. git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@10335 35acf78f-673a-0410-8e92-d51de3d6d3f4 --- demos/AVR/NIL-DIGISPARK-ATTINY-167/readme.txt | 28 +++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 demos/AVR/NIL-DIGISPARK-ATTINY-167/readme.txt (limited to 'demos') diff --git a/demos/AVR/NIL-DIGISPARK-ATTINY-167/readme.txt b/demos/AVR/NIL-DIGISPARK-ATTINY-167/readme.txt new file mode 100644 index 000000000..882bf35e1 --- /dev/null +++ b/demos/AVR/NIL-DIGISPARK-ATTINY-167/readme.txt @@ -0,0 +1,28 @@ +****************************************************************************** +** ChibiOS/NIL port for Atmel AVR ATTiny167. ** +****************************************************************************** + +** TARGET ** + +The demo runs on a Digispark Pro board based on an ATtiny167. + +** The Demo ** + +The demo currently just toggles the test/status LED every second. +The LED is connected to the PB1 pin of the ATtiny167 MCU. +This pin corresponds to P1 on the Digispark Pro board. + +** Build Procedure ** + +The demo was built using the GCC AVR toolchain. +It should build with WinAVR too! +Just run the command "make" to build this example. + +** Notes ** + +The ATtiny167 is pre-programmed with a bootloader. +Thus it can act as an USB device. +The Digispark Pro runs the “micronucleus” bootloader. +This bootloader comes with a command line tool which can be used to +program the board. Form more details, look at the Makefile or the github at +https://github.com/micronucleus/micronucleus -- cgit v1.2.3