From 821bc9f643dd2486646e89893eda61346b1b7818 Mon Sep 17 00:00:00 2001 From: gdisirio Date: Sat, 4 Jun 2011 07:54:53 +0000 Subject: git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@3023 35acf78f-673a-0410-8e92-d51de3d6d3f4 --- demos/ARMCM3-STM32F103-FATFS-GCC/Makefile | 207 ------------ demos/ARMCM3-STM32F103-FATFS-GCC/ch.ld | 130 ------- demos/ARMCM3-STM32F103-FATFS-GCC/chconf.h | 504 ---------------------------- demos/ARMCM3-STM32F103-FATFS-GCC/halconf.h | 325 ------------------ demos/ARMCM3-STM32F103-FATFS-GCC/main.c | 327 ------------------ demos/ARMCM3-STM32F103-FATFS-GCC/mcuconf.h | 154 --------- demos/ARMCM3-STM32F103-FATFS-GCC/readme.txt | 33 -- demos/ARMCM3-STM32F103-FATFS/Makefile | 207 ++++++++++++ demos/ARMCM3-STM32F103-FATFS/ch.ld | 130 +++++++ demos/ARMCM3-STM32F103-FATFS/chconf.h | 504 ++++++++++++++++++++++++++++ demos/ARMCM3-STM32F103-FATFS/halconf.h | 325 ++++++++++++++++++ demos/ARMCM3-STM32F103-FATFS/main.c | 327 ++++++++++++++++++ demos/ARMCM3-STM32F103-FATFS/mcuconf.h | 154 +++++++++ demos/ARMCM3-STM32F103-FATFS/readme.txt | 33 ++ 14 files changed, 1680 insertions(+), 1680 deletions(-) delete mode 100644 demos/ARMCM3-STM32F103-FATFS-GCC/Makefile delete mode 100644 demos/ARMCM3-STM32F103-FATFS-GCC/ch.ld delete mode 100644 demos/ARMCM3-STM32F103-FATFS-GCC/chconf.h delete mode 100644 demos/ARMCM3-STM32F103-FATFS-GCC/halconf.h delete mode 100644 demos/ARMCM3-STM32F103-FATFS-GCC/main.c delete mode 100644 demos/ARMCM3-STM32F103-FATFS-GCC/mcuconf.h delete mode 100644 demos/ARMCM3-STM32F103-FATFS-GCC/readme.txt create mode 100644 demos/ARMCM3-STM32F103-FATFS/Makefile create mode 100644 demos/ARMCM3-STM32F103-FATFS/ch.ld create mode 100644 demos/ARMCM3-STM32F103-FATFS/chconf.h create mode 100644 demos/ARMCM3-STM32F103-FATFS/halconf.h create mode 100644 demos/ARMCM3-STM32F103-FATFS/main.c create mode 100644 demos/ARMCM3-STM32F103-FATFS/mcuconf.h create mode 100644 demos/ARMCM3-STM32F103-FATFS/readme.txt (limited to 'demos') diff --git a/demos/ARMCM3-STM32F103-FATFS-GCC/Makefile b/demos/ARMCM3-STM32F103-FATFS-GCC/Makefile deleted file mode 100644 index f8733c3ae..000000000 --- a/demos/ARMCM3-STM32F103-FATFS-GCC/Makefile +++ /dev/null @@ -1,207 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable register caching optimization (read documentation). -ifeq ($(USE_CURRP_CACHING),) - USE_CURRP_CACHING = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Enable this if you really want to use the STM FWLib. -ifeq ($(USE_FWLIB),) - USE_FWLIB = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Define linker script file here -LDSCRIPT= ch.ld - -# Imported source files -CHIBIOS = ../.. -include $(CHIBIOS)/boards/OLIMEX_STM32_P103/board.mk -include $(CHIBIOS)/os/hal/platforms/STM32/platform.mk -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32/port.mk -include $(CHIBIOS)/os/kernel/kernel.mk -include $(CHIBIOS)/test/test.mk -include $(CHIBIOS)/ext/fatfs/fatfs.mk - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(PORTSRC) \ - $(KERNSRC) \ - $(TESTSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(FATFSSRC) \ - $(CHIBIOS)/os/various/shell.c \ - $(CHIBIOS)/os/various/syscalls.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = $(PORTASM) - -INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) \ - $(FATFSINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -OD = $(TRGT)objdump -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of default section -# - -# List all default C defines here, like -D_DEBUG=1 -DDEFS = -DSTDOUT_SD=SD2 -DSTDIN_SD=SD2 - -# List all default ASM defines here, like -D_DEBUG=1 -DADEFS = - -# List all default directories to look for include files here -DINCDIR = - -# List the default directory to look for the libraries here -DLIBDIR = - -# List all default libraries here -DLIBS = - -# -# End of default section -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -ifeq ($(USE_FWLIB),yes) - include $(CHIBIOS)/ext/stm32lib/stm32lib.mk - CSRC += $(STM32SRC) - INCDIR += $(STM32INC) - USE_OPT += -DUSE_STDPERIPH_DRIVER -endif - -include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/demos/ARMCM3-STM32F103-FATFS-GCC/ch.ld b/demos/ARMCM3-STM32F103-FATFS-GCC/ch.ld deleted file mode 100644 index 4d97e7682..000000000 --- a/demos/ARMCM3-STM32F103-FATFS-GCC/ch.ld +++ /dev/null @@ -1,130 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010, - 2011 Giovanni Di Sirio. - - This file is part of ChibiOS/RT. - - ChibiOS/RT is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS/RT is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/* - * ST32F103 memory setup. - */ -__main_stack_size__ = 0x0400; -__process_stack_size__ = 0x0400; -__stacks_total_size__ = __main_stack_size__ + __process_stack_size__; - -MEMORY -{ - flash : org = 0x08000000, len = 128k - ram : org = 0x20000000, len = 20k -} - -__ram_start__ = ORIGIN(ram); -__ram_size__ = LENGTH(ram); -__ram_end__ = __ram_start__ + __ram_size__; - -SECTIONS -{ - . = 0; - _text = .; - - startup : ALIGN(16) SUBALIGN(16) - { - KEEP(*(vectors)) - } > flash - - constructors : ALIGN(4) SUBALIGN(4) - { - PROVIDE(__init_array_start = .); - KEEP(*(SORT(.init_array.*))) - KEEP(*(.init_array)) - PROVIDE(__init_array_end = .); - } > flash - - destructors : ALIGN(4) SUBALIGN(4) - { - PROVIDE(__fini_array_start = .); - KEEP(*(.fini_array)) - KEEP(*(SORT(.fini_array.*))) - PROVIDE(__fini_array_end = .); - } > flash - - .text : ALIGN(16) SUBALIGN(16) - { - *(.text.startup.*) - *(.text) - *(.text.*) - *(.rodata) - *(.rodata.*) - *(.glue_7t) - *(.glue_7) - *(.gcc*) - } > flash - - .ARM.extab : - { - *(.ARM.extab* .gnu.linkonce.armextab.*) - } > flash - - .ARM.exidx : { - PROVIDE(__exidx_start = .); - *(.ARM.exidx* .gnu.linkonce.armexidx.*) - PROVIDE(__exidx_end = .); - } > flash - - .eh_frame_hdr : - { - *(.eh_frame_hdr) - } > flash - - .eh_frame : ONLY_IF_RO - { - *(.eh_frame) - } > flash - - . = ALIGN(4); - _etext = .; - _textdata = _etext; - - .data : - { - PROVIDE(_data = .); - *(.data) - . = ALIGN(4); - *(.data.*) - . = ALIGN(4); - *(.ramtext) - . = ALIGN(4); - PROVIDE(_edata = .); - } > ram AT > flash - - .bss : - { - PROVIDE(_bss_start = .); - *(.bss) - . = ALIGN(4); - *(.bss.*) - . = ALIGN(4); - *(COMMON) - . = ALIGN(4); - PROVIDE(_bss_end = .); - } > ram -} - -PROVIDE(end = .); -_end = .; - -__heap_base__ = _end; -__heap_end__ = __ram_end__ - __stacks_total_size__; diff --git a/demos/ARMCM3-STM32F103-FATFS-GCC/chconf.h b/demos/ARMCM3-STM32F103-FATFS-GCC/chconf.h deleted file mode 100644 index c9c4c286a..000000000 --- a/demos/ARMCM3-STM32F103-FATFS-GCC/chconf.h +++ /dev/null @@ -1,504 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010, - 2011 Giovanni Di Sirio. - - This file is part of ChibiOS/RT. - - ChibiOS/RT is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS/RT is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -/*===========================================================================*/ -/* Kernel parameters. */ -/*===========================================================================*/ - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) -#define CH_FREQUENCY 1000 -#endif - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - */ -#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) -#define CH_TIME_QUANTUM 20 -#endif - -/** - * @brief Nested locks. - * @details If enabled then the use of nested @p chSysLock() / @p chSysUnlock() - * operations is allowed.
- * For performance and code size reasons the recommended setting - * is to leave this option disabled.
- * You may use this option if you need to merge ChibiOS/RT with - * external libraries that require nested lock/unlock operations. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_USE_NESTED_LOCKS) || defined(__DOXYGEN__) -#define CH_USE_NESTED_LOCKS FALSE -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_USE_MEMCORE. - */ -#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) -#define CH_MEMCORE_SIZE 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread automatically. The application has - * then the responsibility to do one of the following: - * - Spawn a custom idle thread at priority @p IDLEPRIO. - * - Change the main() thread priority to @p IDLEPRIO then enter - * an endless loop. In this scenario the @p main() thread acts as - * the idle thread. - * . - * @note Unless an idle thread is spawned the @p main() thread must not - * enter a sleep state. - */ -#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) -#define CH_NO_IDLE_THREAD FALSE -#endif - -/*===========================================================================*/ -/* Performance options. */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) -#define CH_OPTIMIZE_SPEED TRUE -#endif - -/*===========================================================================*/ -/* Subsystem options. */ -/*===========================================================================*/ - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) -#define CH_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) -#define CH_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Atomic semaphore API. - * @details If enabled then the semaphores the @p chSemSignalWait() API - * is included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) -#define CH_USE_SEMSW TRUE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) -#define CH_USE_MUTEXES TRUE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MUTEXES. - */ -#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_CONDVARS. - */ -#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) -#define CH_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_EVENTS. - */ -#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) -#define CH_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special requirements. - * @note Requires @p CH_USE_MESSAGES. - */ -#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) -#define CH_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_SEMAPHORES. - */ -#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) -#define CH_USE_MAILBOXES TRUE -#endif - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) -#define CH_USE_QUEUES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) -#define CH_USE_MEMCORE TRUE -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or - * @p CH_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) -#define CH_USE_HEAP TRUE -#endif - -/** - * @brief C-runtime allocator. - * @details If enabled the the heap allocator APIs just wrap the C-runtime - * @p malloc() and @p free() functions. - * - * @note The default is @p FALSE. - * @note Requires @p CH_USE_HEAP. - * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the - * appropriate documentation. - */ -#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) -#define CH_USE_MALLOC_HEAP FALSE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) -#define CH_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_USE_WAITEXIT. - * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. - */ -#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) -#define CH_USE_DYNAMIC TRUE -#endif - -/*===========================================================================*/ -/* Debug options. */ -/*===========================================================================*/ - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_TRACE FALSE -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p Thread structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p TRUE. - * @note This debug option is defaulted to TRUE because it is required by - * some test cases into the test suite. - */ -#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) -#define CH_DBG_THREADS_PROFILING TRUE -#endif - -/*===========================================================================*/ -/* Kernel hooks. */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p Thread structure. - */ -#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) -#define THREAD_EXT_FIELDS \ - /* Add threads custom fields here.*/ -#endif - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitily from all - * the threads creation APIs. - */ -#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} -#endif - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) -#define THREAD_EXT_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} -#endif - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) -#define IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} -#endif - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_TICK_EVENT_HOOK() { \ - /* System tick event code here.*/ \ -} -#endif - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) -#define SYSTEM_HALT_HOOK() { \ - /* System halt code here.*/ \ -} -#endif - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/demos/ARMCM3-STM32F103-FATFS-GCC/halconf.h b/demos/ARMCM3-STM32F103-FATFS-GCC/halconf.h deleted file mode 100644 index 33ecee26a..000000000 --- a/demos/ARMCM3-STM32F103-FATFS-GCC/halconf.h +++ /dev/null @@ -1,325 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010, - 2011 Giovanni Di Sirio. - - This file is part of ChibiOS/RT. - - ChibiOS/RT is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS/RT is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI TRUE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI TRUE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Block size for MMC transfers. - */ -#if !defined(MMC_SECTOR_SIZE) || defined(__DOXYGEN__) -#define MMC_SECTOR_SIZE 512 -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/** - * @brief Number of positive insertion queries before generating the - * insertion event. - */ -#if !defined(MMC_POLLING_INTERVAL) || defined(__DOXYGEN__) -#define MMC_POLLING_INTERVAL 10 -#endif - -/** - * @brief Interval, in milliseconds, between insertion queries. - */ -#if !defined(MMC_POLLING_DELAY) || defined(__DOXYGEN__) -#define MMC_POLLING_DELAY 10 -#endif - -/** - * @brief Uses the SPI polled API for small data transfers. - * @details Polled transfers usually improve performance because it - * saves two context switches and interrupt servicing. Note - * that this option has no effect on large transfers which - * are always performed using DMAs/IRQs. - */ -#if !defined(MMC_USE_SPI_POLLING) || defined(__DOXYGEN__) -#define MMC_USE_SPI_POLLING TRUE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* PWM driver related settings. */ -/*===========================================================================*/ - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intevals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/demos/ARMCM3-STM32F103-FATFS-GCC/main.c b/demos/ARMCM3-STM32F103-FATFS-GCC/main.c deleted file mode 100644 index a5bfb13a8..000000000 --- a/demos/ARMCM3-STM32F103-FATFS-GCC/main.c +++ /dev/null @@ -1,327 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010, - 2011 Giovanni Di Sirio. - - This file is part of ChibiOS/RT. - - ChibiOS/RT is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS/RT is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -#include -#include - -#include "ch.h" -#include "hal.h" -#include "test.h" -#include "shell.h" -#include "evtimer.h" - -#include "ff.h" - -/*===========================================================================*/ -/* MMC/SPI related. */ -/*===========================================================================*/ - -/** - * @brief FS object. - */ -FATFS MMC_FS; - -/** - * MMC driver instance. - */ -MMCDriver MMCD1; - -/* FS mounted and ready.*/ -static bool_t fs_ready = FALSE; - -/* Maximum speed SPI configuration (18MHz, CPHA=0, CPOL=0, MSb first).*/ -static SPIConfig hs_spicfg = {NULL, IOPORT2, GPIOB_SPI2NSS, 0}; - -/* Low speed SPI configuration (281.250KHz, CPHA=0, CPOL=0, MSb first).*/ -static SPIConfig ls_spicfg = {NULL, IOPORT2, GPIOB_SPI2NSS, - SPI_CR1_BR_2 | SPI_CR1_BR_1}; - -/* Card insertion verification.*/ -static bool_t mmc_is_inserted(void) {return palReadPad(IOPORT3, GPIOC_MMCCP);} - -/* Card protection verification.*/ -static bool_t mmc_is_protected(void) {return !palReadPad(IOPORT3, GPIOC_MMCWP);} - -/* Generic large buffer.*/ -uint8_t fbuff[1024]; - -static FRESULT scan_files(char *path) -{ - FRESULT res; - FILINFO fno; - DIR dir; - int i; - char *fn; - - res = f_opendir(&dir, path); - if (res == FR_OK) { - i = strlen(path); - for (;;) { - res = f_readdir(&dir, &fno); - if (res != FR_OK || fno.fname[0] == 0) - break; - if (fno.fname[0] == '.') - continue; - fn = fno.fname; - if (fno.fattrib & AM_DIR) { - siprintf(&path[i], "/%s", fn); - res = scan_files(path); - if (res != FR_OK) - break; - path[i] = 0; - } - else { - iprintf("%s/%s\r\n", path, fn); - } - } - } - return res; -} - -/*===========================================================================*/ -/* Command line related. */ -/*===========================================================================*/ - -#define SHELL_WA_SIZE THD_WA_SIZE(2048) -#define TEST_WA_SIZE THD_WA_SIZE(256) - -static void cmd_mem(BaseChannel *chp, int argc, char *argv[]) { - size_t n, size; - char buf[52]; - - (void)argv; - if (argc > 0) { - shellPrintLine(chp, "Usage: mem"); - return; - } - n = chHeapStatus(NULL, &size); - siprintf(buf, "core free memory : %u bytes", chCoreStatus()); - shellPrintLine(chp, buf); - siprintf(buf, "heap fragments : %u", n); - shellPrintLine(chp, buf); - siprintf(buf, "heap free total : %u bytes", size); - shellPrintLine(chp, buf); -} - -static void cmd_threads(BaseChannel *chp, int argc, char *argv[]) { - static const char *states[] = { - "READY", - "CURRENT", - "SUSPENDED", - "WTSEM", - "WTMTX", - "WTCOND", - "SLEEPING", - "WTEXIT", - "WTOREVT", - "WTANDEVT", - "SNDMSGQ", - "SNDMSG", - "WTMSG", - "FINAL" - }; - Thread *tp; - char buf[60]; - - (void)argv; - if (argc > 0) { - shellPrintLine(chp, "Usage: threads"); - return; - } - shellPrintLine(chp, " addr stack prio refs state time"); - tp = chRegFirstThread(); - do { - siprintf(buf, "%8lx %8lx %4u %4i %9s %u", - (uint32_t)tp, (uint32_t)tp->p_ctx.r13, - (unsigned int)tp->p_prio, tp->p_refs - 1, - states[tp->p_state], (unsigned int)tp->p_time); - shellPrintLine(chp, buf); - tp = chRegNextThread(tp); - } while (tp != NULL); -} - -static void cmd_test(BaseChannel *chp, int argc, char *argv[]) { - Thread *tp; - - (void)argv; - if (argc > 0) { - shellPrintLine(chp, "Usage: test"); - return; - } - tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriority(), - TestThread, chp); - if (tp == NULL) { - shellPrintLine(chp, "out of memory"); - return; - } - chThdWait(tp); -} - -static void cmd_tree(BaseChannel *chp, int argc, char *argv[]) { - FRESULT err; - uint32_t clusters; - FATFS *fsp; - - (void)argv; - if (argc > 0) { - shellPrintLine(chp, "Usage: tree"); - return; - } - if (!fs_ready) { - shellPrintLine(chp, "File System not mounted"); - return; - } - err = f_getfree("/", &clusters, &fsp); - if (err != FR_OK) { - shellPrintLine(chp, "FS: f_getfree() failed"); - return; - } - siprintf((void *)fbuff, - "FS: %lu free clusters, %lu sectors per cluster, %lu bytes free", - clusters, (uint32_t)MMC_FS.csize, - clusters * (uint32_t)MMC_FS.csize * (uint32_t)MMC_SECTOR_SIZE); - shellPrintLine(chp, (void *)fbuff); - fbuff[0] = 0; - scan_files((char *)fbuff); -} - -static const ShellCommand commands[] = { - {"mem", cmd_mem}, - {"threads", cmd_threads}, - {"test", cmd_test}, - {"tree", cmd_tree}, - {NULL, NULL} -}; - -static const ShellConfig shell_cfg1 = { - (BaseChannel *)&SD2, - commands -}; - -/* - * Red LEDs blinker thread, times are in milliseconds. - */ -static WORKING_AREA(waThread1, 128); -static msg_t Thread1(void *arg) { - - (void)arg; - while (TRUE) { - palTogglePad(IOPORT3, GPIOC_LED); - if (fs_ready) - chThdSleepMilliseconds(200); - else - chThdSleepMilliseconds(500); - } - return 0; -} - -/* - * MMC card insertion event. - */ -static void InsertHandler(eventid_t id) { - FRESULT err; - - (void)id; - /* - * On insertion MMC initialization and FS mount. - */ - if (mmcConnect(&MMCD1)) { - return; - } - err = f_mount(0, &MMC_FS); - if (err != FR_OK) { - mmcDisconnect(&MMCD1); - return; - } - fs_ready = TRUE; -} - -/* - * MMC card removal event. - */ -static void RemoveHandler(eventid_t id) { - - (void)id; - fs_ready = FALSE; -} - -/* - * Application entry point. - */ -int main(void) { - static const evhandler_t evhndl[] = { - InsertHandler, - RemoveHandler - }; - Thread *shelltp = NULL; - struct EventListener el0, el1; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the serial driver 2 using the driver default configuration. - */ - sdStart(&SD2, NULL); - - /* - * Shell manager initialization. - */ - shellInit(); - - /* - * Initializes the MMC driver to work with SPI2. - */ - palSetPadMode(IOPORT2, GPIOB_SPI2NSS, PAL_MODE_OUTPUT_PUSHPULL); - palSetPad(IOPORT2, GPIOB_SPI2NSS); - mmcObjectInit(&MMCD1, &SPID2, - &ls_spicfg, &hs_spicfg, - mmc_is_protected, mmc_is_inserted); - mmcStart(&MMCD1, NULL); - - /* - * Creates the blinker thread. - */ - chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - /* - * Normal main() thread activity, in this demo it does nothing except - * sleeping in a loop and listen for events. - */ - chEvtRegister(&MMCD1.inserted_event, &el0, 0); - chEvtRegister(&MMCD1.removed_event, &el1, 1); - while (TRUE) { - if (!shelltp) - shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO); - else if (chThdTerminated(shelltp)) { - chThdRelease(shelltp); /* Recovers memory of the previous shell. */ - shelltp = NULL; /* Triggers spawning of a new shell. */ - } - chEvtDispatch(evhndl, chEvtWaitOne(ALL_EVENTS)); - } - return 0; -} diff --git a/demos/ARMCM3-STM32F103-FATFS-GCC/mcuconf.h b/demos/ARMCM3-STM32F103-FATFS-GCC/mcuconf.h deleted file mode 100644 index 8f6199e69..000000000 --- a/demos/ARMCM3-STM32F103-FATFS-GCC/mcuconf.h +++ /dev/null @@ -1,154 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010, - 2011 Giovanni Di Sirio. - - This file is part of ChibiOS/RT. - - ChibiOS/RT is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 3 of the License, or - (at your option) any later version. - - ChibiOS/RT is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . -*/ - -/* - * STM32 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCO STM32_MCO_NOCLOCK - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 TRUE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 5 -#define STM32_ADC_DMA_ERROR_HOOK(adcp) chSysHalt() - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 TRUE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 TRUE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED TRUE -#define STM32_PWM_USE_TIM1 TRUE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 TRUE -#define STM32_SPI_USE_SPI2 TRUE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 TRUE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 TRUE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 6 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/demos/ARMCM3-STM32F103-FATFS-GCC/readme.txt b/demos/ARMCM3-STM32F103-FATFS-GCC/readme.txt deleted file mode 100644 index 4178478bb..000000000 --- a/demos/ARMCM3-STM32F103-FATFS-GCC/readme.txt +++ /dev/null @@ -1,33 +0,0 @@ -***************************************************************************** -** ChibiOS/RT port for ARM-Cortex-M3 STM32F103. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Olimex STM32-P103 board. - -** The Demo ** - -This demo shows how to integrate the FatFs file system and use the SPI and MMC -drivers. -The demo flashes the board LED using a thread and monitors the MMC slot for -a card insertion. When a card is inserted then the file system is mounted -and the LED flashes faster. -A command line shell is spawned on SD2, all the interaction with the demo is -performed using the command shell, type "help" for a list of the available -commands. - -** Build Procedure ** - -The demo has been tested by using the free Codesourcery GCC-based toolchain, -YAGARTO and an experimental WinARM build including GCC 4.3.0. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/demos/ARMCM3-STM32F103-FATFS/Makefile b/demos/ARMCM3-STM32F103-FATFS/Makefile new file mode 100644 index 000000000..f8733c3ae --- /dev/null +++ b/demos/ARMCM3-STM32F103-FATFS/Makefile @@ -0,0 +1,207 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable register caching optimization (read documentation). +ifeq ($(USE_CURRP_CACHING),) + USE_CURRP_CACHING = no +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Enable this if you really want to use the STM FWLib. +ifeq ($(USE_FWLIB),) + USE_FWLIB = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Define linker script file here +LDSCRIPT= ch.ld + +# Imported source files +CHIBIOS = ../.. +include $(CHIBIOS)/boards/OLIMEX_STM32_P103/board.mk +include $(CHIBIOS)/os/hal/platforms/STM32/platform.mk +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32/port.mk +include $(CHIBIOS)/os/kernel/kernel.mk +include $(CHIBIOS)/test/test.mk +include $(CHIBIOS)/ext/fatfs/fatfs.mk + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(PORTSRC) \ + $(KERNSRC) \ + $(TESTSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + $(FATFSSRC) \ + $(CHIBIOS)/os/various/shell.c \ + $(CHIBIOS)/os/various/syscalls.c \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = $(PORTASM) + +INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) \ + $(FATFSINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m3 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +HEX = $(CP) -O ihex +BIN = $(CP) -O binary + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of default section +# + +# List all default C defines here, like -D_DEBUG=1 +DDEFS = -DSTDOUT_SD=SD2 -DSTDIN_SD=SD2 + +# List all default ASM defines here, like -D_DEBUG=1 +DADEFS = + +# List all default directories to look for include files here +DINCDIR = + +# List the default directory to look for the libraries here +DLIBDIR = + +# List all default libraries here +DLIBS = + +# +# End of default section +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +ifeq ($(USE_FWLIB),yes) + include $(CHIBIOS)/ext/stm32lib/stm32lib.mk + CSRC += $(STM32SRC) + INCDIR += $(STM32INC) + USE_OPT += -DUSE_STDPERIPH_DRIVER +endif + +include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk diff --git a/demos/ARMCM3-STM32F103-FATFS/ch.ld b/demos/ARMCM3-STM32F103-FATFS/ch.ld new file mode 100644 index 000000000..4d97e7682 --- /dev/null +++ b/demos/ARMCM3-STM32F103-FATFS/ch.ld @@ -0,0 +1,130 @@ +/* + ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010, + 2011 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +/* + * ST32F103 memory setup. + */ +__main_stack_size__ = 0x0400; +__process_stack_size__ = 0x0400; +__stacks_total_size__ = __main_stack_size__ + __process_stack_size__; + +MEMORY +{ + flash : org = 0x08000000, len = 128k + ram : org = 0x20000000, len = 20k +} + +__ram_start__ = ORIGIN(ram); +__ram_size__ = LENGTH(ram); +__ram_end__ = __ram_start__ + __ram_size__; + +SECTIONS +{ + . = 0; + _text = .; + + startup : ALIGN(16) SUBALIGN(16) + { + KEEP(*(vectors)) + } > flash + + constructors : ALIGN(4) SUBALIGN(4) + { + PROVIDE(__init_array_start = .); + KEEP(*(SORT(.init_array.*))) + KEEP(*(.init_array)) + PROVIDE(__init_array_end = .); + } > flash + + destructors : ALIGN(4) SUBALIGN(4) + { + PROVIDE(__fini_array_start = .); + KEEP(*(.fini_array)) + KEEP(*(SORT(.fini_array.*))) + PROVIDE(__fini_array_end = .); + } > flash + + .text : ALIGN(16) SUBALIGN(16) + { + *(.text.startup.*) + *(.text) + *(.text.*) + *(.rodata) + *(.rodata.*) + *(.glue_7t) + *(.glue_7) + *(.gcc*) + } > flash + + .ARM.extab : + { + *(.ARM.extab* .gnu.linkonce.armextab.*) + } > flash + + .ARM.exidx : { + PROVIDE(__exidx_start = .); + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + PROVIDE(__exidx_end = .); + } > flash + + .eh_frame_hdr : + { + *(.eh_frame_hdr) + } > flash + + .eh_frame : ONLY_IF_RO + { + *(.eh_frame) + } > flash + + . = ALIGN(4); + _etext = .; + _textdata = _etext; + + .data : + { + PROVIDE(_data = .); + *(.data) + . = ALIGN(4); + *(.data.*) + . = ALIGN(4); + *(.ramtext) + . = ALIGN(4); + PROVIDE(_edata = .); + } > ram AT > flash + + .bss : + { + PROVIDE(_bss_start = .); + *(.bss) + . = ALIGN(4); + *(.bss.*) + . = ALIGN(4); + *(COMMON) + . = ALIGN(4); + PROVIDE(_bss_end = .); + } > ram +} + +PROVIDE(end = .); +_end = .; + +__heap_base__ = _end; +__heap_end__ = __ram_end__ - __stacks_total_size__; diff --git a/demos/ARMCM3-STM32F103-FATFS/chconf.h b/demos/ARMCM3-STM32F103-FATFS/chconf.h new file mode 100644 index 000000000..c9c4c286a --- /dev/null +++ b/demos/ARMCM3-STM32F103-FATFS/chconf.h @@ -0,0 +1,504 @@ +/* + ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010, + 2011 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +/*===========================================================================*/ +/* Kernel parameters. */ +/*===========================================================================*/ + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__) +#define CH_FREQUENCY 1000 +#endif + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + */ +#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__) +#define CH_TIME_QUANTUM 20 +#endif + +/** + * @brief Nested locks. + * @details If enabled then the use of nested @p chSysLock() / @p chSysUnlock() + * operations is allowed.
+ * For performance and code size reasons the recommended setting + * is to leave this option disabled.
+ * You may use this option if you need to merge ChibiOS/RT with + * external libraries that require nested lock/unlock operations. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_USE_NESTED_LOCKS) || defined(__DOXYGEN__) +#define CH_USE_NESTED_LOCKS FALSE +#endif + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_USE_MEMCORE. + */ +#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__) +#define CH_MEMCORE_SIZE 0 +#endif + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread automatically. The application has + * then the responsibility to do one of the following: + * - Spawn a custom idle thread at priority @p IDLEPRIO. + * - Change the main() thread priority to @p IDLEPRIO then enter + * an endless loop. In this scenario the @p main() thread acts as + * the idle thread. + * . + * @note Unless an idle thread is spawned the @p main() thread must not + * enter a sleep state. + */ +#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__) +#define CH_NO_IDLE_THREAD FALSE +#endif + +/*===========================================================================*/ +/* Performance options. */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__) +#define CH_OPTIMIZE_SPEED TRUE +#endif + +/*===========================================================================*/ +/* Subsystem options. */ +/*===========================================================================*/ + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__) +#define CH_USE_REGISTRY TRUE +#endif + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__) +#define CH_USE_WAITEXIT TRUE +#endif + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__) +#define CH_USE_SEMAPHORES TRUE +#endif + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special requirements. + * @note Requires @p CH_USE_SEMAPHORES. + */ +#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__) +#define CH_USE_SEMAPHORES_PRIORITY FALSE +#endif + +/** + * @brief Atomic semaphore API. + * @details If enabled then the semaphores the @p chSemSignalWait() API + * is included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_USE_SEMAPHORES. + */ +#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__) +#define CH_USE_SEMSW TRUE +#endif + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__) +#define CH_USE_MUTEXES TRUE +#endif + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_USE_MUTEXES. + */ +#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__) +#define CH_USE_CONDVARS TRUE +#endif + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_USE_CONDVARS. + */ +#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__) +#define CH_USE_CONDVARS_TIMEOUT TRUE +#endif + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__) +#define CH_USE_EVENTS TRUE +#endif + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_USE_EVENTS. + */ +#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__) +#define CH_USE_EVENTS_TIMEOUT TRUE +#endif + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__) +#define CH_USE_MESSAGES TRUE +#endif + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special requirements. + * @note Requires @p CH_USE_MESSAGES. + */ +#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__) +#define CH_USE_MESSAGES_PRIORITY FALSE +#endif + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_USE_SEMAPHORES. + */ +#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__) +#define CH_USE_MAILBOXES TRUE +#endif + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__) +#define CH_USE_QUEUES TRUE +#endif + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__) +#define CH_USE_MEMCORE TRUE +#endif + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or + * @p CH_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__) +#define CH_USE_HEAP TRUE +#endif + +/** + * @brief C-runtime allocator. + * @details If enabled the the heap allocator APIs just wrap the C-runtime + * @p malloc() and @p free() functions. + * + * @note The default is @p FALSE. + * @note Requires @p CH_USE_HEAP. + * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the + * appropriate documentation. + */ +#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__) +#define CH_USE_MALLOC_HEAP FALSE +#endif + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__) +#define CH_USE_MEMPOOLS TRUE +#endif + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_USE_WAITEXIT. + * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS. + */ +#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__) +#define CH_USE_DYNAMIC TRUE +#endif + +/*===========================================================================*/ +/* Debug options. */ +/*===========================================================================*/ + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__) +#define CH_DBG_ENABLE_CHECKS FALSE +#endif + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__) +#define CH_DBG_ENABLE_ASSERTS FALSE +#endif + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__) +#define CH_DBG_ENABLE_TRACE FALSE +#endif + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__) +#define CH_DBG_ENABLE_STACK_CHECK FALSE +#endif + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__) +#define CH_DBG_FILL_THREADS FALSE +#endif + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p Thread structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p TRUE. + * @note This debug option is defaulted to TRUE because it is required by + * some test cases into the test suite. + */ +#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__) +#define CH_DBG_THREADS_PROFILING TRUE +#endif + +/*===========================================================================*/ +/* Kernel hooks. */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p Thread structure. + */ +#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__) +#define THREAD_EXT_FIELDS \ + /* Add threads custom fields here.*/ +#endif + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitily from all + * the threads creation APIs. + */ +#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__) +#define THREAD_EXT_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} +#endif + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__) +#define THREAD_EXT_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} +#endif + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__) +#define IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} +#endif + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__) +#define SYSTEM_TICK_EVENT_HOOK() { \ + /* System tick event code here.*/ \ +} +#endif + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__) +#define SYSTEM_HALT_HOOK() { \ + /* System halt code here.*/ \ +} +#endif + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/demos/ARMCM3-STM32F103-FATFS/halconf.h b/demos/ARMCM3-STM32F103-FATFS/halconf.h new file mode 100644 index 000000000..33ecee26a --- /dev/null +++ b/demos/ARMCM3-STM32F103-FATFS/halconf.h @@ -0,0 +1,325 @@ +/* + ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010, + 2011 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI TRUE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL TRUE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI TRUE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Block size for MMC transfers. + */ +#if !defined(MMC_SECTOR_SIZE) || defined(__DOXYGEN__) +#define MMC_SECTOR_SIZE 512 +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/** + * @brief Number of positive insertion queries before generating the + * insertion event. + */ +#if !defined(MMC_POLLING_INTERVAL) || defined(__DOXYGEN__) +#define MMC_POLLING_INTERVAL 10 +#endif + +/** + * @brief Interval, in milliseconds, between insertion queries. + */ +#if !defined(MMC_POLLING_DELAY) || defined(__DOXYGEN__) +#define MMC_POLLING_DELAY 10 +#endif + +/** + * @brief Uses the SPI polled API for small data transfers. + * @details Polled transfers usually improve performance because it + * saves two context switches and interrupt servicing. Note + * that this option has no effect on large transfers which + * are always performed using DMAs/IRQs. + */ +#if !defined(MMC_USE_SPI_POLLING) || defined(__DOXYGEN__) +#define MMC_USE_SPI_POLLING TRUE +#endif + +/*===========================================================================*/ +/* PAL driver related settings. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* PWM driver related settings. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intevals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/demos/ARMCM3-STM32F103-FATFS/main.c b/demos/ARMCM3-STM32F103-FATFS/main.c new file mode 100644 index 000000000..a5bfb13a8 --- /dev/null +++ b/demos/ARMCM3-STM32F103-FATFS/main.c @@ -0,0 +1,327 @@ +/* + ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010, + 2011 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +#include +#include + +#include "ch.h" +#include "hal.h" +#include "test.h" +#include "shell.h" +#include "evtimer.h" + +#include "ff.h" + +/*===========================================================================*/ +/* MMC/SPI related. */ +/*===========================================================================*/ + +/** + * @brief FS object. + */ +FATFS MMC_FS; + +/** + * MMC driver instance. + */ +MMCDriver MMCD1; + +/* FS mounted and ready.*/ +static bool_t fs_ready = FALSE; + +/* Maximum speed SPI configuration (18MHz, CPHA=0, CPOL=0, MSb first).*/ +static SPIConfig hs_spicfg = {NULL, IOPORT2, GPIOB_SPI2NSS, 0}; + +/* Low speed SPI configuration (281.250KHz, CPHA=0, CPOL=0, MSb first).*/ +static SPIConfig ls_spicfg = {NULL, IOPORT2, GPIOB_SPI2NSS, + SPI_CR1_BR_2 | SPI_CR1_BR_1}; + +/* Card insertion verification.*/ +static bool_t mmc_is_inserted(void) {return palReadPad(IOPORT3, GPIOC_MMCCP);} + +/* Card protection verification.*/ +static bool_t mmc_is_protected(void) {return !palReadPad(IOPORT3, GPIOC_MMCWP);} + +/* Generic large buffer.*/ +uint8_t fbuff[1024]; + +static FRESULT scan_files(char *path) +{ + FRESULT res; + FILINFO fno; + DIR dir; + int i; + char *fn; + + res = f_opendir(&dir, path); + if (res == FR_OK) { + i = strlen(path); + for (;;) { + res = f_readdir(&dir, &fno); + if (res != FR_OK || fno.fname[0] == 0) + break; + if (fno.fname[0] == '.') + continue; + fn = fno.fname; + if (fno.fattrib & AM_DIR) { + siprintf(&path[i], "/%s", fn); + res = scan_files(path); + if (res != FR_OK) + break; + path[i] = 0; + } + else { + iprintf("%s/%s\r\n", path, fn); + } + } + } + return res; +} + +/*===========================================================================*/ +/* Command line related. */ +/*===========================================================================*/ + +#define SHELL_WA_SIZE THD_WA_SIZE(2048) +#define TEST_WA_SIZE THD_WA_SIZE(256) + +static void cmd_mem(BaseChannel *chp, int argc, char *argv[]) { + size_t n, size; + char buf[52]; + + (void)argv; + if (argc > 0) { + shellPrintLine(chp, "Usage: mem"); + return; + } + n = chHeapStatus(NULL, &size); + siprintf(buf, "core free memory : %u bytes", chCoreStatus()); + shellPrintLine(chp, buf); + siprintf(buf, "heap fragments : %u", n); + shellPrintLine(chp, buf); + siprintf(buf, "heap free total : %u bytes", size); + shellPrintLine(chp, buf); +} + +static void cmd_threads(BaseChannel *chp, int argc, char *argv[]) { + static const char *states[] = { + "READY", + "CURRENT", + "SUSPENDED", + "WTSEM", + "WTMTX", + "WTCOND", + "SLEEPING", + "WTEXIT", + "WTOREVT", + "WTANDEVT", + "SNDMSGQ", + "SNDMSG", + "WTMSG", + "FINAL" + }; + Thread *tp; + char buf[60]; + + (void)argv; + if (argc > 0) { + shellPrintLine(chp, "Usage: threads"); + return; + } + shellPrintLine(chp, " addr stack prio refs state time"); + tp = chRegFirstThread(); + do { + siprintf(buf, "%8lx %8lx %4u %4i %9s %u", + (uint32_t)tp, (uint32_t)tp->p_ctx.r13, + (unsigned int)tp->p_prio, tp->p_refs - 1, + states[tp->p_state], (unsigned int)tp->p_time); + shellPrintLine(chp, buf); + tp = chRegNextThread(tp); + } while (tp != NULL); +} + +static void cmd_test(BaseChannel *chp, int argc, char *argv[]) { + Thread *tp; + + (void)argv; + if (argc > 0) { + shellPrintLine(chp, "Usage: test"); + return; + } + tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriority(), + TestThread, chp); + if (tp == NULL) { + shellPrintLine(chp, "out of memory"); + return; + } + chThdWait(tp); +} + +static void cmd_tree(BaseChannel *chp, int argc, char *argv[]) { + FRESULT err; + uint32_t clusters; + FATFS *fsp; + + (void)argv; + if (argc > 0) { + shellPrintLine(chp, "Usage: tree"); + return; + } + if (!fs_ready) { + shellPrintLine(chp, "File System not mounted"); + return; + } + err = f_getfree("/", &clusters, &fsp); + if (err != FR_OK) { + shellPrintLine(chp, "FS: f_getfree() failed"); + return; + } + siprintf((void *)fbuff, + "FS: %lu free clusters, %lu sectors per cluster, %lu bytes free", + clusters, (uint32_t)MMC_FS.csize, + clusters * (uint32_t)MMC_FS.csize * (uint32_t)MMC_SECTOR_SIZE); + shellPrintLine(chp, (void *)fbuff); + fbuff[0] = 0; + scan_files((char *)fbuff); +} + +static const ShellCommand commands[] = { + {"mem", cmd_mem}, + {"threads", cmd_threads}, + {"test", cmd_test}, + {"tree", cmd_tree}, + {NULL, NULL} +}; + +static const ShellConfig shell_cfg1 = { + (BaseChannel *)&SD2, + commands +}; + +/* + * Red LEDs blinker thread, times are in milliseconds. + */ +static WORKING_AREA(waThread1, 128); +static msg_t Thread1(void *arg) { + + (void)arg; + while (TRUE) { + palTogglePad(IOPORT3, GPIOC_LED); + if (fs_ready) + chThdSleepMilliseconds(200); + else + chThdSleepMilliseconds(500); + } + return 0; +} + +/* + * MMC card insertion event. + */ +static void InsertHandler(eventid_t id) { + FRESULT err; + + (void)id; + /* + * On insertion MMC initialization and FS mount. + */ + if (mmcConnect(&MMCD1)) { + return; + } + err = f_mount(0, &MMC_FS); + if (err != FR_OK) { + mmcDisconnect(&MMCD1); + return; + } + fs_ready = TRUE; +} + +/* + * MMC card removal event. + */ +static void RemoveHandler(eventid_t id) { + + (void)id; + fs_ready = FALSE; +} + +/* + * Application entry point. + */ +int main(void) { + static const evhandler_t evhndl[] = { + InsertHandler, + RemoveHandler + }; + Thread *shelltp = NULL; + struct EventListener el0, el1; + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Activates the serial driver 2 using the driver default configuration. + */ + sdStart(&SD2, NULL); + + /* + * Shell manager initialization. + */ + shellInit(); + + /* + * Initializes the MMC driver to work with SPI2. + */ + palSetPadMode(IOPORT2, GPIOB_SPI2NSS, PAL_MODE_OUTPUT_PUSHPULL); + palSetPad(IOPORT2, GPIOB_SPI2NSS); + mmcObjectInit(&MMCD1, &SPID2, + &ls_spicfg, &hs_spicfg, + mmc_is_protected, mmc_is_inserted); + mmcStart(&MMCD1, NULL); + + /* + * Creates the blinker thread. + */ + chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); + + /* + * Normal main() thread activity, in this demo it does nothing except + * sleeping in a loop and listen for events. + */ + chEvtRegister(&MMCD1.inserted_event, &el0, 0); + chEvtRegister(&MMCD1.removed_event, &el1, 1); + while (TRUE) { + if (!shelltp) + shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO); + else if (chThdTerminated(shelltp)) { + chThdRelease(shelltp); /* Recovers memory of the previous shell. */ + shelltp = NULL; /* Triggers spawning of a new shell. */ + } + chEvtDispatch(evhndl, chEvtWaitOne(ALL_EVENTS)); + } + return 0; +} diff --git a/demos/ARMCM3-STM32F103-FATFS/mcuconf.h b/demos/ARMCM3-STM32F103-FATFS/mcuconf.h new file mode 100644 index 000000000..8f6199e69 --- /dev/null +++ b/demos/ARMCM3-STM32F103-FATFS/mcuconf.h @@ -0,0 +1,154 @@ +/* + ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010, + 2011 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +/* + * STM32 drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +/* + * HAL driver system settings. + */ +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_USBPRE STM32_USBPRE_DIV1P5 +#define STM32_MCO STM32_MCO_NOCLOCK + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 TRUE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC1_IRQ_PRIORITY 5 +#define STM32_ADC_DMA_ERROR_HOOK(adcp) chSysHalt() + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 TRUE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 TRUE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED TRUE +#define STM32_PWM_USE_TIM1 TRUE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 TRUE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 TRUE +#define STM32_SPI_USE_SPI2 TRUE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) chSysHalt() + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 TRUE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) chSysHalt() + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 TRUE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 6 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 diff --git a/demos/ARMCM3-STM32F103-FATFS/readme.txt b/demos/ARMCM3-STM32F103-FATFS/readme.txt new file mode 100644 index 000000000..4178478bb --- /dev/null +++ b/demos/ARMCM3-STM32F103-FATFS/readme.txt @@ -0,0 +1,33 @@ +***************************************************************************** +** ChibiOS/RT port for ARM-Cortex-M3 STM32F103. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an Olimex STM32-P103 board. + +** The Demo ** + +This demo shows how to integrate the FatFs file system and use the SPI and MMC +drivers. +The demo flashes the board LED using a thread and monitors the MMC slot for +a card insertion. When a card is inserted then the file system is mounted +and the LED flashes faster. +A command line shell is spawned on SD2, all the interaction with the demo is +performed using the command shell, type "help" for a list of the available +commands. + +** Build Procedure ** + +The demo has been tested by using the free Codesourcery GCC-based toolchain, +YAGARTO and an experimental WinARM build including GCC 4.3.0. +Just modify the TRGT line in the makefile in order to use different GCC ports. + +** Notes ** + +Some files used by the demo are not part of ChibiOS/RT but are copyright of +ST Microelectronics and are licensed under a different license. +Also note that not all the files present in the ST library are distributed +with ChibiOS/RT, you can find the whole library on the ST web site: + + http://www.st.com -- cgit v1.2.3