From 456ddf784d7bc6fe7c88446faa8bac759078d019 Mon Sep 17 00:00:00 2001
From: gdisirio <gdisirio@35acf78f-673a-0410-8e92-d51de3d6d3f4>
Date: Tue, 11 Dec 2012 10:27:10 +0000
Subject: git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@4900
 35acf78f-673a-0410-8e92-d51de3d6d3f4

---
 demos/PPC-SPC563M-GCC/halconf.h |  2 +-
 demos/PPC-SPC563M-GCC/mcuconf.h | 51 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 52 insertions(+), 1 deletion(-)
 create mode 100644 demos/PPC-SPC563M-GCC/mcuconf.h

(limited to 'demos/PPC-SPC563M-GCC')

diff --git a/demos/PPC-SPC563M-GCC/halconf.h b/demos/PPC-SPC563M-GCC/halconf.h
index 83783d10f..bab04ab7b 100644
--- a/demos/PPC-SPC563M-GCC/halconf.h
+++ b/demos/PPC-SPC563M-GCC/halconf.h
@@ -32,7 +32,7 @@
 #ifndef _HALCONF_H_
 #define _HALCONF_H_
 
-/*#include "mcuconf.h"*/
+#include "mcuconf.h"
 
 /**
  * @brief   Enables the TM subsystem.
diff --git a/demos/PPC-SPC563M-GCC/mcuconf.h b/demos/PPC-SPC563M-GCC/mcuconf.h
new file mode 100644
index 000000000..6b54153b1
--- /dev/null
+++ b/demos/PPC-SPC563M-GCC/mcuconf.h
@@ -0,0 +1,51 @@
+/*
+ * Licensed under ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ *        http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software 
+ * distributed under the License is distributed on an "AS IS" BASIS, 
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+/*
+ * SPC560Pxx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 1...15       Lowest...Highest.
+ */
+
+#define SPC563Mxx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define SPC_NO_INIT                         FALSE
+#define SPC_CLK_BYPASS                      FALSE
+#define SPC_ALLOW_OVERCLOCK                 FALSE
+#define SPC_CLK_PREDIV                      1
+#define SPC_CLK_MFD                         80
+#define SPC_CLK_RFD                         RFD_DIV4
+#define SPC_FLASH_BIUCR                     (BIUCR_BANK1_TOO |              \
+                                             BIUCR_MASTER4_PREFETCH |       \
+                                             BIUCR_MASTER0_PREFETCH |       \
+                                             BIUCR_DPFEN |                  \
+                                             BIUCR_IPFEN |                  \
+                                             BIUCR_PFLIM_ON_MISS |          \
+                                             BIUCR_BFEN)
+
+/*
+ * SERIAL driver system settings.
+ */
+#define SPC_USE_ESCIA                       TRUE
+#define SPC_USE_ESCIB                       TRUE
+#define SPC_ESCIA_PRIORITY                  8
+#define SPC_ESCIB_PRIORITY                  8
-- 
cgit v1.2.3