From 1dbf08a13876e1d3f924bfa68f5c2014aa684e0e Mon Sep 17 00:00:00 2001 From: Theodore Ateba Date: Sun, 1 Oct 2017 09:42:16 +0000 Subject: AVR: Add missing readme.txt file in demos folders. git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@10723 35acf78f-673a-0410-8e92-d51de3d6d3f4 --- demos/AVR/NIL-ARDUINO-MEGA/readme.txt | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 demos/AVR/NIL-ARDUINO-MEGA/readme.txt (limited to 'demos/AVR/NIL-ARDUINO-MEGA') diff --git a/demos/AVR/NIL-ARDUINO-MEGA/readme.txt b/demos/AVR/NIL-ARDUINO-MEGA/readme.txt new file mode 100644 index 000000000..9df55d7f0 --- /dev/null +++ b/demos/AVR/NIL-ARDUINO-MEGA/readme.txt @@ -0,0 +1,23 @@ +***************************************************************************** +** ChibiOS/NIL port for Atmel AVR ATmega2560. ** +***************************************************************************** + +** TARGET ** + +The demo runs on an Arduino Mega board. + +** The Demo ** + +One thread prints a message to the serial console, which is available on +the board USB connector (FT232 converter). + +Another thread toggles the LED on PB7 (pin 13 on Arduino IDE) every 500ms. + +** Build Procedure ** + +The demo was built using the GCC AVR toolchain. It should build with WinAVR too! + +** Notes ** + +This demo runs natively so the Arduino bootloader must be removed and the FUSEs +reprogrammed. The values used for fuses are LFUSE=0xe7 and HFUSE=0x99. -- cgit v1.2.3