From 6798baae9674d251c07865662321e520c969669e Mon Sep 17 00:00:00 2001 From: barthess Date: Sun, 4 Sep 2011 18:49:14 +0000 Subject: Added board OLIMEX_STM32_103STK. git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@3289 35acf78f-673a-0410-8e92-d51de3d6d3f4 --- boards/OLIMEX_STM32_103STK/board.c | 54 ++++++++++++ boards/OLIMEX_STM32_103STK/board.h | 162 ++++++++++++++++++++++++++++++++++++ boards/OLIMEX_STM32_103STK/board.mk | 5 ++ 3 files changed, 221 insertions(+) create mode 100644 boards/OLIMEX_STM32_103STK/board.c create mode 100644 boards/OLIMEX_STM32_103STK/board.h create mode 100644 boards/OLIMEX_STM32_103STK/board.mk (limited to 'boards') diff --git a/boards/OLIMEX_STM32_103STK/board.c b/boards/OLIMEX_STM32_103STK/board.c new file mode 100644 index 000000000..b8b98c05f --- /dev/null +++ b/boards/OLIMEX_STM32_103STK/board.c @@ -0,0 +1,54 @@ +/* + ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010, + 2011 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +#include "ch.h" +#include "hal.h" + +/** + * @brief PAL setup. + * @details Digital I/O ports static configuration as defined in @p board.h. + * This variable is used by the HAL when initializing the PAL driver. + */ +#if HAL_USE_PAL || defined(__DOXYGEN__) +const PALConfig pal_default_config = +{ + {VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH}, + {VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH}, + {VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH}, + {VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH}, + {VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH}, +}; +#endif + +/* + * Early initialization code. + * This initialization must be performed just after stack setup and before + * any other initialization. + */ +void __early_init(void) { + + stm32_clock_init(); +} + +/* + * Board-specific initialization code. + */ +void boardInit(void) { +} diff --git a/boards/OLIMEX_STM32_103STK/board.h b/boards/OLIMEX_STM32_103STK/board.h new file mode 100644 index 000000000..a53695906 --- /dev/null +++ b/boards/OLIMEX_STM32_103STK/board.h @@ -0,0 +1,162 @@ +/* + ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010, + 2011 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +/* + * Setup for the Olimex STM33-P103 proto board. + */ + +/* + * Board identifier. + */ +#define BOARD_OLIMEX_STM32_103STK +#define BOARD_NAME "Olimex STM32-103STK" + +/* + * Board frequencies. + */ +#define STM32_LSECLK 32768 +#define STM32_HSECLK 8000000 + +/* + * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h. + */ +#define STM32F10X_MD + +/* + * IO pins assignments. + */ +#define GPIOA_BUTTON_WAKEUP 0 +#define GPIOC_BUTTON_TAMPER 13 +#define GPIOC_JOY 5 +#define GPIOC_JOY_CENTER_BUT 6 + +#define GPIOA_SPI1NSS 4 +#define GPIOB_SPI2NSS 12 + +#define GPIOC_MMCWP 2 +#define GPIOC_MMCCP 1 + +#define GPIOC_USB_P 4 +#define GPIOC_LCD_RES 7 +#define GPIOC_NRF_CE 8 +#define GPIOC_NRF_IRQ 9 +#define GPIOC_LCD_E 10 + +#define GPIOC_USB_DISC 11 +#define GPIOC_LED 12 + +#define GPIOB_ACCEL_IRQ 5 + +/* + * I/O ports initial setup, this configuration is established soon after reset + * in the initialization code. + * + * The digits have the following meaning: + * 0 - Analog input. + * 1 - Push Pull output 10MHz. + * 2 - Push Pull output 2MHz. + * 3 - Push Pull output 50MHz. + * 4 - Digital input. + * 5 - Open Drain output 10MHz. + * 6 - Open Drain output 2MHz. + * 7 - Open Drain output 50MHz. + * 8 - Digital input with PullUp or PullDown resistor depending on ODR. + * 9 - Alternate Push Pull output 10MHz. + * A - Alternate Push Pull output 2MHz. + * B - Alternate Push Pull output 50MHz. + * C - Reserved. + * D - Alternate Open Drain output 10MHz. + * E - Alternate Open Drain output 2MHz. + * F - Alternate Open Drain output 50MHz. + * Please refer to the STM32 Reference Manual for details. + */ + +/* + * Port A setup. + * Everything input with pull-up except: + * PA0 - Normal input (BUTTON). + * PA2 - Alternate output (USART2 TX). + * PA3 - Normal input (USART2 RX). + */ +#define VAL_GPIOACRL 0x88884B84 /* PA7...PA0 */ +#define VAL_GPIOACRH 0x88888888 /* PA15...PA8 */ +#define VAL_GPIOAODR 0xFFFFFFFF + +/* + * Port B setup. + * Everything input with pull-up except: + * PB6,7 - Alternate open drain (I2C1). + * PB10,11 - Alternate open drain (I2C2). + * PB12 - Push Pull output (MMC SPI2 NSS). + * PB13 - Alternate output (MMC SPI2 SCK). + * PB14 - Normal input (MMC SPI2 MISO). + * PB15 - Alternate output (MMC SPI2 MOSI). + */ +#define VAL_GPIOBCRL 0xEE888888 /* PB7...PB0 */ +#define VAL_GPIOBCRH 0xB4B3EE88 /* PB15...PB8 */ +#define VAL_GPIOBODR 0xFFFFFFFF + +/* + * Port C setup. + * Everything input with pull-up except: + * PC4 - Normal input because there is an external resistor. + * PC5 - Analog input (joystick). + * PC6 - Normal input because there is an external resistor. + * PC7 - Normal input because there is an external resistor. + * PC10 - Push Pull output (CAN CNTRL). + * PC11 - Push Pull output (USB DISC). + * PC12 - Open Drain output (LED). + */ +#define VAL_GPIOCCRL 0x44048888 /* PC7...PC0 */ +#define VAL_GPIOCCRH 0x88863388 /* PC15...PC8 */ +#define VAL_GPIOCODR 0xFFFFFFFF + +/* + * Port D setup. + * Everything input with pull-up except: + * PD0 - Normal input (XTAL). + * PD1 - Normal input (XTAL). + */ +#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */ +#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */ +#define VAL_GPIODODR 0xFFFFFFFF + +/* + * Port E setup. + * Everything input with pull-up except: + */ +#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */ +#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */ +#define VAL_GPIOEODR 0xFFFFFFFF + +#if !defined(_FROM_ASM_) +#ifdef __cplusplus +extern "C" { +#endif + void boardInit(void); +#ifdef __cplusplus +} +#endif +#endif /* _FROM_ASM_ */ + +#endif /* _BOARD_H_ */ diff --git a/boards/OLIMEX_STM32_103STK/board.mk b/boards/OLIMEX_STM32_103STK/board.mk new file mode 100644 index 000000000..383e1c490 --- /dev/null +++ b/boards/OLIMEX_STM32_103STK/board.mk @@ -0,0 +1,5 @@ +# List of all the board related files. +BOARDSRC = ${CHIBIOS}/boards/OLIMEX_STM32_103STK/board.c + +# Required include directories +BOARDINC = ${CHIBIOS}/boards/OLIMEX_STM32_103STK -- cgit v1.2.3