From fee72530476c5b9eed43fde792df9de367d56800 Mon Sep 17 00:00:00 2001 From: gdisirio Date: Thu, 13 May 2010 14:02:17 +0000 Subject: git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@1915 35acf78f-673a-0410-8e92-d51de3d6d3f4 --- boards/ST_STM3210C_EVAL/board.h | 113 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 113 insertions(+) create mode 100644 boards/ST_STM3210C_EVAL/board.h (limited to 'boards/ST_STM3210C_EVAL/board.h') diff --git a/boards/ST_STM3210C_EVAL/board.h b/boards/ST_STM3210C_EVAL/board.h new file mode 100644 index 000000000..f6e623335 --- /dev/null +++ b/boards/ST_STM3210C_EVAL/board.h @@ -0,0 +1,113 @@ +/* + ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio. + + This file is part of ChibiOS/RT. + + ChibiOS/RT is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + ChibiOS/RT is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . +*/ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +/* + * Setup for the STMicroelectronics STM3210C-EVAL evaluation board. + */ + +/* + * Board identifier. + */ +#define BOARD_ST_STM3210C_EVAL +#define BOARD_NAME "ST STM3210C-EVAL" + +/* + * Board frequencies. + */ +#define STM32_LSECLK 32768 +#define STM32_HSECLK 25000000 + +/* + * MCU type, this macro is used by both the ST library and the ChibiOS/RT + * native STM32 HAL. + */ +#define STM32F10X_CL + +/* + * IO pins assignments. + * *********************TO BE COMPLETED********************* + */ + +/* + * I/O ports initial setup, this configuration is established soon after reset + * in the initialization code. + * + * The digits have the following meaning: + * 0 - Analog input. + * 1 - Push Pull output 10MHz. + * 2 - Push Pull output 2MHz. + * 3 - Push Pull output 50MHz. + * 4 - Digital input. + * 5 - Open Drain output 10MHz. + * 6 - Open Drain output 2MHz. + * 7 - Open Drain output 50MHz. + * 8 - Digital input with PullUp or PullDown resistor depending on ODR. + * 9 - Alternate Push Pull output 10MHz. + * A - Alternate Push Pull output 2MHz. + * B - Alternate Push Pull output 50MHz. + * C - Reserved. + * D - Alternate Open Drain output 10MHz. + * E - Alternate Open Drain output 2MHz. + * F - Alternate Open Drain output 50MHz. + * Please refer to the STM32 Reference Manual for details. + */ + +/* + * Port A setup. + * Everything input with pull-up except: + */ +#define VAL_GPIOACRL 0x88888888 /* PA7...PA0 */ +#define VAL_GPIOACRH 0x88888888 /* PA15...PA8 */ +#define VAL_GPIOAODR 0xFFFFFFFF + +/* + * Port B setup. + * Everything input with pull-up except: + */ +#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */ +#define VAL_GPIOBCRH 0x88888888 /* PB15...PB8 */ +#define VAL_GPIOBODR 0xFFFFFFFF + +/* + * Port C setup. + * Everything input with pull-up except: + */ +#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */ +#define VAL_GPIOCCRH 0x88888888 /* PC15...PC8 */ +#define VAL_GPIOCODR 0xFFFFFFFF + +/* + * Port D setup. + * Everything input with pull-up except: + */ +#define VAL_GPIODCRL 0x88888888 /* PD7...PD0 */ +#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */ +#define VAL_GPIODODR 0xFFFFFFFF + +/* + * Port E setup. + */ +#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */ +#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */ +#define VAL_GPIOEODR 0xFFFFFFFF + +#endif /* _BOARD_H_ */ -- cgit v1.2.3