From 3a123c7c991d3a9bfa1af8716212ed2959de01f9 Mon Sep 17 00:00:00 2001
From: gdisirio <gdisirio@35acf78f-673a-0410-8e92-d51de3d6d3f4>
Date: Wed, 13 Mar 2013 13:24:47 +0000
Subject: git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@5425
 35acf78f-673a-0410-8e92-d51de3d6d3f4

---
 boards/ST_EVB_SPC56EL/board.c | 66 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 66 insertions(+)
 create mode 100644 boards/ST_EVB_SPC56EL/board.c

(limited to 'boards/ST_EVB_SPC56EL/board.c')

diff --git a/boards/ST_EVB_SPC56EL/board.c b/boards/ST_EVB_SPC56EL/board.c
new file mode 100644
index 000000000..e69386b48
--- /dev/null
+++ b/boards/ST_EVB_SPC56EL/board.c
@@ -0,0 +1,66 @@
+/*
+ * Licensed under ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ *        http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software 
+ * distributed under the License is distributed on an "AS IS" BASIS, 
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "ch.h"
+#include "hal.h"
+
+#if HAL_USE_PAL || defined(__DOXYGEN__)
+/* Initial setup of all defined pads, the list is terminated by a {0, 0, 0}.*/
+static const spc_siu_init_t spc_siu_init[] = {
+  {PCR(PORT_B, PB_LIN0_TDX), PAL_HIGH, PAL_MODE_OUTPUT_ALTERNATE(1)},
+  {PCR(PORT_B, PB_LIN0_RDX), PAL_HIGH, PAL_MODE_INPUT},
+  {PCR(PORT_D, PD_BUTTON1),  PAL_LOW,  PAL_MODE_INPUT},
+  {PCR(PORT_D, PD_BUTTON2),  PAL_LOW,  PAL_MODE_INPUT},
+  {PCR(PORT_D, PD_BUTTON3),  PAL_LOW,  PAL_MODE_INPUT},
+  {PCR(PORT_D, PD_BUTTON4),  PAL_LOW,  PAL_MODE_INPUT},
+  {PCR(PORT_D, PD_LED1),     PAL_HIGH, PAL_MODE_OUTPUT_PUSHPULL},
+  {PCR(PORT_D, PD_LED2),     PAL_HIGH, PAL_MODE_OUTPUT_PUSHPULL},
+  {PCR(PORT_D, PD_LED3),     PAL_HIGH, PAL_MODE_OUTPUT_PUSHPULL},
+  {PCR(PORT_D, PD_LED4),     PAL_HIGH, PAL_MODE_OUTPUT_PUSHPULL},
+  {0, 0, 0}
+};
+
+/* Initialization array for the PSMI registers.*/
+static const uint8_t spc_padsels_init[SPC5_SIUL_NUM_PADSELS] = {
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+};
+
+/**
+ * @brief   PAL setup.
+ */
+const PALConfig pal_default_config = {
+  PAL_MODE_UNCONNECTED,             /* Default mode for all undefined pads. */
+  spc_siu_init,
+  spc_padsels_init
+};
+#endif
+
+/*
+ * Early initialization code.
+ * This initialization must be performed just after stack setup and before
+ * any other initialization.
+ */
+void __early_init(void) {
+
+  spc_early_init();
+}
+
+/*
+ * Board-specific initialization code.
+ */
+void boardInit(void) {
+
+}
-- 
cgit v1.2.3