From 51b16c7a2dbd4f3d0be30049a4dad702961bfb8b Mon Sep 17 00:00:00 2001
From: gdisirio <gdisirio@35acf78f-673a-0410-8e92-d51de3d6d3f4>
Date: Sat, 10 Aug 2013 14:58:16 +0000
Subject: git-svn-id:
 svn://svn.code.sf.net/p/chibios/svn/branches/kernel_3_dev@6126
 35acf78f-673a-0410-8e92-d51de3d6d3f4

---
 boards/OLIMEX_MSP430_P1611/board.c | 80 --------------------------------------
 1 file changed, 80 deletions(-)
 delete mode 100644 boards/OLIMEX_MSP430_P1611/board.c

(limited to 'boards/OLIMEX_MSP430_P1611/board.c')

diff --git a/boards/OLIMEX_MSP430_P1611/board.c b/boards/OLIMEX_MSP430_P1611/board.c
deleted file mode 100644
index bf89db001..000000000
--- a/boards/OLIMEX_MSP430_P1611/board.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
-    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/**
- * @brief   PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- *          This variable is used by the HAL when initializing the PAL driver.
- */
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-const PALConfig pal_default_config =
-{
-#if defined(__MSP430_HAS_PORT1__) || defined(__MSP430_HAS_PORT1_R__)
-  {VAL_P1OUT, VAL_P1DIR},
-#endif
-#if defined(__MSP430_HAS_PORT2__) || defined(__MSP430_HAS_PORT2_R__)
-  {VAL_P2OUT, VAL_P2DIR},
-#endif
-#if defined(__MSP430_HAS_PORT3__) || defined(__MSP430_HAS_PORT3_R__)
-  {VAL_P3OUT, VAL_P3DIR},
-#endif
-#if defined(__MSP430_HAS_PORT4__) || defined(__MSP430_HAS_PORT4_R__)
-  {VAL_P4OUT, VAL_P4DIR},
-#endif
-#if defined(__MSP430_HAS_PORT5__) || defined(__MSP430_HAS_PORT5_R__)
-  {VAL_P5OUT, VAL_P5DIR},
-#endif
-#if defined(__MSP430_HAS_PORT6__) || defined(__MSP430_HAS_PORT6_R__)
-  {VAL_P6OUT, VAL_P6DIR},
-#endif
-};
-#endif
-
-CH_IRQ_HANDLER(TIMERA0) {
-
-  CH_IRQ_PROLOGUE();
-
-  chSysLockFromIsr();
-  chSysTimerHandlerI();
-  chSysUnlockFromIsr();
-
-  CH_IRQ_EPILOGUE();
-}
-
-/*
- * Board-specific initialization code.
- */
-void boardInit(void) {
-
-#if USE_MSP430_USART0
-  P3SEL |= (1 << 4) | (1 << 5);
-#endif
-
-#if USE_MSP430_USART1
-  P3SEL |= (1 << 6) | (1 << 7);
-#endif
-
-  /*
-   * Timer 0 setup, uses SMCLK as source.
-   */
-  TACCR0 = SMCLK / 4 / CH_FREQUENCY - 1;/* Counter limit.               */
-  TACTL = TACLR;                        /* Clean start.                 */
-  TACTL = TASSEL_2 | ID_2 | MC_1;       /* Src=SMCLK, ID=4, cmp=TACCR0. */
-  TACCTL0 = CCIE;                       /* Interrupt on compare.        */
-}
-- 
cgit v1.2.3