From b8352d5f4b945b307d5850b3bb2259e9ea3c75a8 Mon Sep 17 00:00:00 2001 From: Giovanni Di Sirio Date: Sat, 4 Nov 2017 15:49:25 +0000 Subject: git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@10938 35acf78f-673a-0410-8e92-d51de3d6d3f4 --- demos/STM32/RT-STM32-LWIP-FATFS-USB/Makefile | 8 +- demos/STM32/RT-STM32F031K6-NUCLEO32/Makefile | 2 +- demos/STM32/RT-STM32F031K6-NUCLEO32/main.c | 4 +- demos/STM32/RT-STM32F042K6-NUCLEO32/Makefile | 2 +- demos/STM32/RT-STM32F042K6-NUCLEO32/main.c | 4 +- .../RT-STM32F103-OLIMEX_STM32_P103-FATFS/main.c | 6 +- .../RT-STM32F103-STM3210E_EVAL-FATFS-USB/main.c | 6 +- demos/STM32/RT-STM32F407-DISCOVERY-G++/main.cpp | 4 +- demos/STM32/RT-STM32L031K6-NUCLEO32/Makefile | 2 +- demos/STM32/RT-STM32L031K6-NUCLEO32/main.c | 4 +- testhal/STM32/STM32F0xx/ADC/Makefile | 4 +- testhal/STM32/STM32F0xx/CAN/Makefile | 4 +- testhal/STM32/STM32F0xx/CAN/main.c | 4 +- testhal/STM32/STM32F0xx/EXT/.cproject | 52 -- testhal/STM32/STM32F0xx/EXT/.project | 38 -- testhal/STM32/STM32F0xx/EXT/Makefile | 215 -------- testhal/STM32/STM32F0xx/EXT/chconf.h | 580 --------------------- .../STM32F0xx-EXT (OpenOCD, Flash and Run).launch | 52 -- testhal/STM32/STM32F0xx/EXT/halconf.h | 417 --------------- testhal/STM32/STM32F0xx/EXT/main.c | 98 ---- testhal/STM32/STM32F0xx/EXT/mcuconf.h | 200 ------- testhal/STM32/STM32F0xx/EXT/readme.txt | 30 -- testhal/STM32/STM32F0xx/IRQ_STORM/Makefile | 4 +- testhal/STM32/STM32F0xx/PWM-ICU/Makefile | 4 +- testhal/STM32/STM32F0xx/SPI/Makefile | 4 +- testhal/STM32/STM32F0xx/UART/Makefile | 4 +- testhal/STM32/STM32F0xx/UART/main.c | 4 +- testhal/STM32/STM32F0xx/WDG/Makefile | 4 +- testhal/STM32/STM32F1xx/ADC/Makefile | 4 +- testhal/STM32/STM32F1xx/CAN/Makefile | 4 +- testhal/STM32/STM32F1xx/CAN/main.c | 4 +- testhal/STM32/STM32F1xx/EXT/.cproject | 56 -- testhal/STM32/STM32F1xx/EXT/.project | 33 -- testhal/STM32/STM32F1xx/EXT/Makefile | 220 -------- testhal/STM32/STM32F1xx/EXT/chconf.h | 580 --------------------- testhal/STM32/STM32F1xx/EXT/halconf.h | 417 --------------- testhal/STM32/STM32F1xx/EXT/main.c | 98 ---- testhal/STM32/STM32F1xx/EXT/mcuconf.h | 214 -------- testhal/STM32/STM32F1xx/EXT/readme.txt | 26 - testhal/STM32/STM32F1xx/I2C/Makefile | 4 +- testhal/STM32/STM32F1xx/IRQ_STORM/Makefile | 4 +- testhal/STM32/STM32F1xx/PWM-ICU/Makefile | 4 +- testhal/STM32/STM32F1xx/RTC/Makefile | 4 +- testhal/STM32/STM32F1xx/SPI/Makefile | 4 +- testhal/STM32/STM32F1xx/UART/Makefile | 4 +- testhal/STM32/STM32F1xx/UART/main.c | 4 +- testhal/STM32/STM32F2xx/EXT/.cproject | 50 -- testhal/STM32/STM32F2xx/EXT/.project | 38 -- testhal/STM32/STM32F2xx/EXT/Makefile | 220 -------- testhal/STM32/STM32F2xx/EXT/chconf.h | 580 --------------------- .../STM32F2xx-EXT (OpenOCD, Flash and Run).launch | 52 -- testhal/STM32/STM32F2xx/EXT/halconf.h | 417 --------------- testhal/STM32/STM32F2xx/EXT/main.c | 100 ---- testhal/STM32/STM32F2xx/EXT/mcuconf.h | 342 ------------ testhal/STM32/STM32F2xx/EXT/readme.txt | 30 -- testhal/STM32/STM32F2xx/PWM-ICU/Makefile | 7 +- testhal/STM32/STM32F37x/ADC/Makefile | 4 +- testhal/STM32/STM32F37x/CAN/Makefile | 4 +- testhal/STM32/STM32F37x/CAN/main.c | 4 +- testhal/STM32/STM32F37x/EXT/.cproject | 52 -- testhal/STM32/STM32F37x/EXT/.project | 38 -- testhal/STM32/STM32F37x/EXT/Makefile | 220 -------- testhal/STM32/STM32F37x/EXT/chconf.h | 580 --------------------- testhal/STM32/STM32F37x/EXT/halconf.h | 417 --------------- testhal/STM32/STM32F37x/EXT/main.c | 100 ---- testhal/STM32/STM32F37x/EXT/mcuconf.h | 226 -------- testhal/STM32/STM32F37x/EXT/readme.txt | 30 -- testhal/STM32/STM32F37x/I2C/Makefile | 4 +- testhal/STM32/STM32F37x/IRQ_STORM/Makefile | 4 +- testhal/STM32/STM32F37x/PWM-ICU/Makefile | 4 +- testhal/STM32/STM32F37x/SDADC/Makefile | 4 +- testhal/STM32/STM32F37x/SPI/Makefile | 4 +- testhal/STM32/STM32F37x/UART/Makefile | 4 +- testhal/STM32/STM32F37x/UART/main.c | 4 +- testhal/STM32/STM32F3xx/ADC/Makefile | 4 +- testhal/STM32/STM32F3xx/ADC_DUAL/Makefile | 4 +- testhal/STM32/STM32F3xx/CAN/Makefile | 4 +- testhal/STM32/STM32F3xx/CAN/main.c | 4 +- testhal/STM32/STM32F3xx/DAC/Makefile | 4 +- testhal/STM32/STM32F3xx/EXT/.cproject | 52 -- testhal/STM32/STM32F3xx/EXT/.project | 90 ---- testhal/STM32/STM32F3xx/EXT/Makefile | 220 -------- testhal/STM32/STM32F3xx/EXT/chconf.h | 580 --------------------- testhal/STM32/STM32F3xx/EXT/halconf.h | 417 --------------- testhal/STM32/STM32F3xx/EXT/main.c | 113 ---- testhal/STM32/STM32F3xx/EXT/mcuconf.h | 253 --------- testhal/STM32/STM32F3xx/EXT/readme.txt | 30 -- testhal/STM32/STM32F3xx/IRQ_STORM/Makefile | 4 +- testhal/STM32/STM32F3xx/PWM-ICU/Makefile | 4 +- testhal/STM32/STM32F3xx/SPI/Makefile | 4 +- testhal/STM32/STM32F3xx/UART/Makefile | 4 +- testhal/STM32/STM32F3xx/UART/main.c | 4 +- testhal/STM32/STM32F3xx/WDG/Makefile | 4 +- testhal/STM32/STM32F4xx/EXT/.cproject | 50 -- testhal/STM32/STM32F4xx/EXT/.project | 38 -- testhal/STM32/STM32F4xx/EXT/Makefile | 220 -------- testhal/STM32/STM32F4xx/EXT/chconf.h | 580 --------------------- .../STM32F4xx-EXT (OpenOCD, Flash and Run).launch | 52 -- testhal/STM32/STM32F4xx/EXT/halconf.h | 417 --------------- testhal/STM32/STM32F4xx/EXT/main.c | 100 ---- testhal/STM32/STM32F4xx/EXT/mcuconf.h | 342 ------------ testhal/STM32/STM32F4xx/EXT/readme.txt | 30 -- testhal/STM32/STM32L0xx/EXT/.cproject | 52 -- testhal/STM32/STM32L0xx/EXT/.project | 38 -- testhal/STM32/STM32L0xx/EXT/Makefile | 220 -------- testhal/STM32/STM32L0xx/EXT/chconf.h | 580 --------------------- .../STM32L0xx-EXT (OpenOCD, Flash and Run).launch | 52 -- testhal/STM32/STM32L0xx/EXT/halconf.h | 417 --------------- testhal/STM32/STM32L0xx/EXT/main.c | 98 ---- testhal/STM32/STM32L0xx/EXT/mcuconf.h | 177 ------- testhal/STM32/STM32L0xx/EXT/readme.txt | 30 -- testhal/STM32/STM32L1xx/EXT/.cproject | 52 -- testhal/STM32/STM32L1xx/EXT/.project | 38 -- testhal/STM32/STM32L1xx/EXT/Makefile | 220 -------- testhal/STM32/STM32L1xx/EXT/chconf.h | 580 --------------------- testhal/STM32/STM32L1xx/EXT/halconf.h | 424 --------------- testhal/STM32/STM32L1xx/EXT/main.c | 98 ---- testhal/STM32/STM32L1xx/EXT/mcuconf.h | 206 -------- testhal/STM32/STM32L1xx/EXT/readme.txt | 30 -- testhal/STM32/STM32L4xx/EXT/.cproject | 50 -- testhal/STM32/STM32L4xx/EXT/.project | 90 ---- testhal/STM32/STM32L4xx/EXT/Makefile | 220 -------- testhal/STM32/STM32L4xx/EXT/chconf.h | 580 --------------------- .../STM32L4xx-EXT (OpenOCD, Flash and Run).launch | 52 -- testhal/STM32/STM32L4xx/EXT/halconf.h | 417 --------------- testhal/STM32/STM32L4xx/EXT/main.c | 118 ----- testhal/STM32/STM32L4xx/EXT/mcuconf.h | 336 ------------ testhal/STM32/STM32L4xx/EXT/readme.txt | 30 -- .../STM32/multi/PAL/Makefile-stm32f051_discovery | 4 +- testhal/STM32/multi/PAL/Makefile-stm32f103_olimex | 4 +- .../STM32/multi/PAL/Makefile-stm32f303_discovery | 4 +- testhal/STM32/multi/PAL/Makefile-stm32f373_eval | 4 +- .../STM32/multi/PAL/Makefile-stm32f407_discovery | 4 +- .../STM32/multi/PAL/Makefile-stm32f429_discovery | 4 +- .../STM32/multi/PAL/Makefile-stm32f746_discovery | 4 +- .../STM32/multi/PAL/Makefile-stm32l053_discovery | 4 +- .../STM32/multi/PAL/Makefile-stm32l151_discovery | 4 +- .../STM32/multi/PAL/Makefile-stm32l476_discovery | 4 +- .../STM32/multi/SPI/Makefile-stm32f091_nucleo64 | 6 +- .../STM32/multi/SPI/Makefile-stm32f303_discovery | 4 +- .../STM32/multi/SPI/Makefile-stm32f407_discovery | 4 +- testhal/common/irq_storm.c | 4 +- 142 files changed, 133 insertions(+), 15741 deletions(-) delete mode 100644 testhal/STM32/STM32F0xx/EXT/.cproject delete mode 100644 testhal/STM32/STM32F0xx/EXT/.project delete mode 100644 testhal/STM32/STM32F0xx/EXT/Makefile delete mode 100644 testhal/STM32/STM32F0xx/EXT/chconf.h delete mode 100644 testhal/STM32/STM32F0xx/EXT/debug/STM32F0xx-EXT (OpenOCD, Flash and Run).launch delete mode 100644 testhal/STM32/STM32F0xx/EXT/halconf.h delete mode 100644 testhal/STM32/STM32F0xx/EXT/main.c delete mode 100644 testhal/STM32/STM32F0xx/EXT/mcuconf.h delete mode 100644 testhal/STM32/STM32F0xx/EXT/readme.txt delete mode 100644 testhal/STM32/STM32F1xx/EXT/.cproject delete mode 100644 testhal/STM32/STM32F1xx/EXT/.project delete mode 100644 testhal/STM32/STM32F1xx/EXT/Makefile delete mode 100644 testhal/STM32/STM32F1xx/EXT/chconf.h delete mode 100644 testhal/STM32/STM32F1xx/EXT/halconf.h delete mode 100644 testhal/STM32/STM32F1xx/EXT/main.c delete mode 100644 testhal/STM32/STM32F1xx/EXT/mcuconf.h delete mode 100644 testhal/STM32/STM32F1xx/EXT/readme.txt delete mode 100644 testhal/STM32/STM32F2xx/EXT/.cproject delete mode 100644 testhal/STM32/STM32F2xx/EXT/.project delete mode 100644 testhal/STM32/STM32F2xx/EXT/Makefile delete mode 100644 testhal/STM32/STM32F2xx/EXT/chconf.h delete mode 100644 testhal/STM32/STM32F2xx/EXT/debug/STM32F2xx-EXT (OpenOCD, Flash and Run).launch delete mode 100644 testhal/STM32/STM32F2xx/EXT/halconf.h delete mode 100644 testhal/STM32/STM32F2xx/EXT/main.c delete mode 100644 testhal/STM32/STM32F2xx/EXT/mcuconf.h delete mode 100644 testhal/STM32/STM32F2xx/EXT/readme.txt delete mode 100644 testhal/STM32/STM32F37x/EXT/.cproject delete mode 100644 testhal/STM32/STM32F37x/EXT/.project delete mode 100644 testhal/STM32/STM32F37x/EXT/Makefile delete mode 100644 testhal/STM32/STM32F37x/EXT/chconf.h delete mode 100644 testhal/STM32/STM32F37x/EXT/halconf.h delete mode 100644 testhal/STM32/STM32F37x/EXT/main.c delete mode 100644 testhal/STM32/STM32F37x/EXT/mcuconf.h delete mode 100644 testhal/STM32/STM32F37x/EXT/readme.txt delete mode 100644 testhal/STM32/STM32F3xx/EXT/.cproject delete mode 100644 testhal/STM32/STM32F3xx/EXT/.project delete mode 100644 testhal/STM32/STM32F3xx/EXT/Makefile delete mode 100644 testhal/STM32/STM32F3xx/EXT/chconf.h delete mode 100644 testhal/STM32/STM32F3xx/EXT/halconf.h delete mode 100644 testhal/STM32/STM32F3xx/EXT/main.c delete mode 100644 testhal/STM32/STM32F3xx/EXT/mcuconf.h delete mode 100644 testhal/STM32/STM32F3xx/EXT/readme.txt delete mode 100644 testhal/STM32/STM32F4xx/EXT/.cproject delete mode 100644 testhal/STM32/STM32F4xx/EXT/.project delete mode 100644 testhal/STM32/STM32F4xx/EXT/Makefile delete mode 100644 testhal/STM32/STM32F4xx/EXT/chconf.h delete mode 100644 testhal/STM32/STM32F4xx/EXT/debug/STM32F4xx-EXT (OpenOCD, Flash and Run).launch delete mode 100644 testhal/STM32/STM32F4xx/EXT/halconf.h delete mode 100644 testhal/STM32/STM32F4xx/EXT/main.c delete mode 100644 testhal/STM32/STM32F4xx/EXT/mcuconf.h delete mode 100644 testhal/STM32/STM32F4xx/EXT/readme.txt delete mode 100644 testhal/STM32/STM32L0xx/EXT/.cproject delete mode 100644 testhal/STM32/STM32L0xx/EXT/.project delete mode 100644 testhal/STM32/STM32L0xx/EXT/Makefile delete mode 100644 testhal/STM32/STM32L0xx/EXT/chconf.h delete mode 100644 testhal/STM32/STM32L0xx/EXT/debug/STM32L0xx-EXT (OpenOCD, Flash and Run).launch delete mode 100644 testhal/STM32/STM32L0xx/EXT/halconf.h delete mode 100644 testhal/STM32/STM32L0xx/EXT/main.c delete mode 100644 testhal/STM32/STM32L0xx/EXT/mcuconf.h delete mode 100644 testhal/STM32/STM32L0xx/EXT/readme.txt delete mode 100644 testhal/STM32/STM32L1xx/EXT/.cproject delete mode 100644 testhal/STM32/STM32L1xx/EXT/.project delete mode 100644 testhal/STM32/STM32L1xx/EXT/Makefile delete mode 100644 testhal/STM32/STM32L1xx/EXT/chconf.h delete mode 100644 testhal/STM32/STM32L1xx/EXT/halconf.h delete mode 100644 testhal/STM32/STM32L1xx/EXT/main.c delete mode 100644 testhal/STM32/STM32L1xx/EXT/mcuconf.h delete mode 100644 testhal/STM32/STM32L1xx/EXT/readme.txt delete mode 100644 testhal/STM32/STM32L4xx/EXT/.cproject delete mode 100644 testhal/STM32/STM32L4xx/EXT/.project delete mode 100644 testhal/STM32/STM32L4xx/EXT/Makefile delete mode 100644 testhal/STM32/STM32L4xx/EXT/chconf.h delete mode 100644 testhal/STM32/STM32L4xx/EXT/debug/STM32L4xx-EXT (OpenOCD, Flash and Run).launch delete mode 100644 testhal/STM32/STM32L4xx/EXT/halconf.h delete mode 100644 testhal/STM32/STM32L4xx/EXT/main.c delete mode 100644 testhal/STM32/STM32L4xx/EXT/mcuconf.h delete mode 100644 testhal/STM32/STM32L4xx/EXT/readme.txt diff --git a/demos/STM32/RT-STM32-LWIP-FATFS-USB/Makefile b/demos/STM32/RT-STM32-LWIP-FATFS-USB/Makefile index aa4f4e0aa..e7d85605c 100644 --- a/demos/STM32/RT-STM32-LWIP-FATFS-USB/Makefile +++ b/demos/STM32/RT-STM32-LWIP-FATFS-USB/Makefile @@ -5,19 +5,19 @@ all: @echo @echo === Building for STM32F407-Olimex ================================== - @make --no-print-directory -f Makefile-stm32f407_olimex all + +@make --no-print-directory -f Makefile-stm32f407_olimex all @echo ==================================================================== @echo @echo === Building for STM32F746-Discovery =============================== - @make --no-print-directory -f Makefile-stm32f746_discovery all + +@make --no-print-directory -f Makefile-stm32f746_discovery all @echo ==================================================================== @echo clean: @echo - -@make --no-print-directory -f Makefile-stm32f407_olimex clean + +@make --no-print-directory -f Makefile-stm32f407_olimex clean @echo - -@make --no-print-directory -f Makefile-stm32f746_discovery clean + +@make --no-print-directory -f Makefile-stm32f746_discovery clean @echo # diff --git a/demos/STM32/RT-STM32F031K6-NUCLEO32/Makefile b/demos/STM32/RT-STM32F031K6-NUCLEO32/Makefile index 8a46fe43b..0c04646cc 100644 --- a/demos/STM32/RT-STM32F031K6-NUCLEO32/Makefile +++ b/demos/STM32/RT-STM32F031K6-NUCLEO32/Makefile @@ -100,7 +100,7 @@ include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk # Other files (optional). include $(CHIBIOS)/test/lib/test.mk include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F031x6.ld diff --git a/demos/STM32/RT-STM32F031K6-NUCLEO32/main.c b/demos/STM32/RT-STM32F031K6-NUCLEO32/main.c index aa0504184..bc5723384 100644 --- a/demos/STM32/RT-STM32F031K6-NUCLEO32/main.c +++ b/demos/STM32/RT-STM32F031K6-NUCLEO32/main.c @@ -17,7 +17,7 @@ #include "ch.h" #include "hal.h" #include "rt_test_root.h" -#include "oslib_test_root.h" +//#include "oslib_test_root.h" /* * Green LED blinker thread, times are in milliseconds. @@ -68,7 +68,7 @@ int main(void) { while (true) { if (!palReadLine(LINE_ARD_D3)) { test_execute((BaseSequentialStream *)&SD1, &rt_test_suite); - test_execute((BaseSequentialStream *)&SD1, &oslib_test_suite); +// test_execute((BaseSequentialStream *)&SD1, &oslib_test_suite); } chThdSleepMilliseconds(500); } diff --git a/demos/STM32/RT-STM32F042K6-NUCLEO32/Makefile b/demos/STM32/RT-STM32F042K6-NUCLEO32/Makefile index 14d063217..4f22d408f 100644 --- a/demos/STM32/RT-STM32F042K6-NUCLEO32/Makefile +++ b/demos/STM32/RT-STM32F042K6-NUCLEO32/Makefile @@ -100,7 +100,7 @@ include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk # Other files (optional). include $(CHIBIOS)/test/lib/test.mk include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F042x6.ld diff --git a/demos/STM32/RT-STM32F042K6-NUCLEO32/main.c b/demos/STM32/RT-STM32F042K6-NUCLEO32/main.c index 9db2932f4..a9b66d3ee 100644 --- a/demos/STM32/RT-STM32F042K6-NUCLEO32/main.c +++ b/demos/STM32/RT-STM32F042K6-NUCLEO32/main.c @@ -17,7 +17,7 @@ #include "ch.h" #include "hal.h" #include "rt_test_root.h" -#include "oslib_test_root.h" +//#include "oslib_test_root.h" /* * Green LED blinker thread, times are in milliseconds. @@ -68,7 +68,7 @@ int main(void) { while (true) { if (!palReadLine(LINE_ARD_D3)) { test_execute((BaseSequentialStream *)&SD2, &rt_test_suite); - test_execute((BaseSequentialStream *)&SD2, &oslib_test_suite); +// test_execute((BaseSequentialStream *)&SD2, &oslib_test_suite); } chThdSleepMilliseconds(500); } diff --git a/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103-FATFS/main.c b/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103-FATFS/main.c index 85f0e4a4f..b9b7289ba 100755 --- a/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103-FATFS/main.c +++ b/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103-FATFS/main.c @@ -72,7 +72,7 @@ static void tmrfunc(void *p) { chEvtBroadcastI(&removed_event); } } - chVTSetI(&tmr, MS2ST(POLLING_DELAY), tmrfunc, bbdp); + chVTSetI(&tmr, TIME_MS2I(POLLING_DELAY), tmrfunc, bbdp); chSysUnlockFromISR(); } @@ -89,7 +89,7 @@ static void tmr_init(void *p) { chEvtObjectInit(&removed_event); chSysLock(); cnt = POLLING_INTERVAL; - chVTSetI(&tmr, MS2ST(POLLING_DELAY), tmrfunc, p); + chVTSetI(&tmr, TIME_MS2I(POLLING_DELAY), tmrfunc, p); chSysUnlock(); } @@ -323,6 +323,6 @@ int main(void) { "shell", NORMALPRIO + 1, shellThread, (void *)&shell_cfg1); } - chEvtDispatch(evhndl, chEvtWaitOneTimeout(ALL_EVENTS, MS2ST(500))); + chEvtDispatch(evhndl, chEvtWaitOneTimeout(ALL_EVENTS, TIME_MS2I(500))); } } diff --git a/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/main.c b/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/main.c index ec91f939a..fa411e5ec 100644 --- a/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/main.c +++ b/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/main.c @@ -75,7 +75,7 @@ static void tmrfunc(void *p) { chEvtBroadcastI(&removed_event); } } - chVTSetI(&tmr, MS2ST(POLLING_DELAY), tmrfunc, bbdp); + chVTSetI(&tmr, TIME_MS2I(POLLING_DELAY), tmrfunc, bbdp); chSysUnlockFromISR(); } @@ -92,7 +92,7 @@ static void tmr_init(void *p) { chEvtObjectInit(&removed_event); chSysLock(); cnt = POLLING_INTERVAL; - chVTSetI(&tmr, MS2ST(POLLING_DELAY), tmrfunc, p); + chVTSetI(&tmr, TIME_MS2I(POLLING_DELAY), tmrfunc, p); chSysUnlock(); } @@ -321,6 +321,6 @@ int main(void) { "shell", NORMALPRIO + 1, shellThread, (void *)&shell_cfg1); } - chEvtDispatch(evhndl, chEvtWaitOneTimeout(ALL_EVENTS, MS2ST(500))); + chEvtDispatch(evhndl, chEvtWaitOneTimeout(ALL_EVENTS, TIME_MS2I(500))); } } diff --git a/demos/STM32/RT-STM32F407-DISCOVERY-G++/main.cpp b/demos/STM32/RT-STM32F407-DISCOVERY-G++/main.cpp index 67868c5bc..5ebcdc852 100644 --- a/demos/STM32/RT-STM32F407-DISCOVERY-G++/main.cpp +++ b/demos/STM32/RT-STM32F407-DISCOVERY-G++/main.cpp @@ -95,7 +95,7 @@ protected: while (true) { switch(curr->action) { case SLEEP: - sleep(MS2ST(curr->value)); + sleep(TIME_MS2I(curr->value)); break; case GOTO: curr = &base[curr->value]; @@ -187,7 +187,7 @@ int main(void) { tester.start(NORMALPRIO); tester.wait(); }; - BaseThread::sleep(MS2ST(500)); + BaseThread::sleep(TIME_MS2I(500)); } return 0; diff --git a/demos/STM32/RT-STM32L031K6-NUCLEO32/Makefile b/demos/STM32/RT-STM32L031K6-NUCLEO32/Makefile index 19d5a0ea1..9552c31d8 100644 --- a/demos/STM32/RT-STM32L031K6-NUCLEO32/Makefile +++ b/demos/STM32/RT-STM32L031K6-NUCLEO32/Makefile @@ -100,7 +100,7 @@ include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk # Other files (optional). include $(CHIBIOS)/test/lib/test.mk include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32L031x6.ld diff --git a/demos/STM32/RT-STM32L031K6-NUCLEO32/main.c b/demos/STM32/RT-STM32L031K6-NUCLEO32/main.c index 9db2932f4..a7311819a 100644 --- a/demos/STM32/RT-STM32L031K6-NUCLEO32/main.c +++ b/demos/STM32/RT-STM32L031K6-NUCLEO32/main.c @@ -17,7 +17,7 @@ #include "ch.h" #include "hal.h" #include "rt_test_root.h" -#include "oslib_test_root.h" +//#include "oslib_test_root.h" /* * Green LED blinker thread, times are in milliseconds. @@ -68,7 +68,7 @@ int main(void) { while (true) { if (!palReadLine(LINE_ARD_D3)) { test_execute((BaseSequentialStream *)&SD2, &rt_test_suite); - test_execute((BaseSequentialStream *)&SD2, &oslib_test_suite); + // test_execute((BaseSequentialStream *)&SD2, &oslib_test_suite); } chThdSleepMilliseconds(500); } diff --git a/testhal/STM32/STM32F0xx/ADC/Makefile b/testhal/STM32/STM32F0xx/ADC/Makefile index 5519eb0ba..6eefd756b 100644 --- a/testhal/STM32/STM32F0xx/ADC/Makefile +++ b/testhal/STM32/STM32F0xx/ADC/Makefile @@ -94,8 +94,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F051x8.ld diff --git a/testhal/STM32/STM32F0xx/CAN/Makefile b/testhal/STM32/STM32F0xx/CAN/Makefile index 158e8e5ff..c5a247274 100644 --- a/testhal/STM32/STM32F0xx/CAN/Makefile +++ b/testhal/STM32/STM32F0xx/CAN/Makefile @@ -94,8 +94,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F072xB.ld diff --git a/testhal/STM32/STM32F0xx/CAN/main.c b/testhal/STM32/STM32F0xx/CAN/main.c index cae08f4e7..691b64655 100644 --- a/testhal/STM32/STM32F0xx/CAN/main.c +++ b/testhal/STM32/STM32F0xx/CAN/main.c @@ -39,7 +39,7 @@ static THD_FUNCTION(can_rx, p) { chRegSetThreadName("receiver"); chEvtRegister(&CAND1.rxfull_event, &el, 0); while (true) { - if (chEvtWaitAnyTimeout(ALL_EVENTS, MS2ST(100)) == 0) + if (chEvtWaitAnyTimeout(ALL_EVENTS, TIME_MS2I(100)) == 0) continue; while (canReceive(&CAND1, CAN_ANY_MAILBOX, &rxmsg, TIME_IMMEDIATE) == MSG_OK) { /* Process message.*/ @@ -66,7 +66,7 @@ static THD_FUNCTION(can_tx, p) { txmsg.data32[1] = 0x00FF00FF; while (true) { - canTransmit(&CAND1, CAN_ANY_MAILBOX, &txmsg, MS2ST(100)); + canTransmit(&CAND1, CAN_ANY_MAILBOX, &txmsg, TIME_MS2I(100)); chThdSleepMilliseconds(500); } } diff --git a/testhal/STM32/STM32F0xx/EXT/.cproject b/testhal/STM32/STM32F0xx/EXT/.cproject deleted file mode 100644 index ad1273b16..000000000 --- a/testhal/STM32/STM32F0xx/EXT/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32/STM32F0xx/EXT/.project b/testhal/STM32/STM32F0xx/EXT/.project deleted file mode 100644 index bae993cd8..000000000 --- a/testhal/STM32/STM32F0xx/EXT/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F0xx-EXT - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32F0_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32/STM32F0xx/EXT/Makefile b/testhal/STM32/STM32F0xx/EXT/Makefile deleted file mode 100644 index 5519eb0ba..000000000 --- a/testhal/STM32/STM32F0xx/EXT/Makefile +++ /dev/null @@ -1,215 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../.. -# Startup files. -include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f0xx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F0xx/platform.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F0_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk -# Other files (optional). -#include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/STM32F051x8.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F0xx/EXT/chconf.h b/testhal/STM32/STM32F0xx/EXT/chconf.h deleted file mode 100644 index 194cd87b9..000000000 --- a/testhal/STM32/STM32F0xx/EXT/chconf.h +++ /dev/null @@ -1,580 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_5_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_OBJ_FIFOS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#define CH_CFG_USE_FACTORY TRUE - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 - -/** - * @brief Enables the registry of generic objects. - */ -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE - -/** - * @brief Enables factory for generic buffers. - */ -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE - -/** - * @brief Enables factory for semaphores. - */ -#define CH_CFG_FACTORY_SEMAPHORES TRUE - -/** - * @brief Enables factory for mailboxes. - */ -#define CH_CFG_FACTORY_MAILBOXES TRUE - -/** - * @brief Enables factory for objects FIFOs. - */ -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/testhal/STM32/STM32F0xx/EXT/debug/STM32F0xx-EXT (OpenOCD, Flash and Run).launch b/testhal/STM32/STM32F0xx/EXT/debug/STM32F0xx-EXT (OpenOCD, Flash and Run).launch deleted file mode 100644 index 79de929f5..000000000 --- a/testhal/STM32/STM32F0xx/EXT/debug/STM32F0xx-EXT (OpenOCD, Flash and Run).launch +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32/STM32F0xx/EXT/halconf.h b/testhal/STM32/STM32F0xx/EXT/halconf.h deleted file mode 100644 index 9095470fd..000000000 --- a/testhal/STM32/STM32F0xx/EXT/halconf.h +++ /dev/null @@ -1,417 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the QSPI subsystem. - */ -#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) -#define HAL_USE_QSPI FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/testhal/STM32/STM32F0xx/EXT/main.c b/testhal/STM32/STM32F0xx/EXT/main.c deleted file mode 100644 index baaa50f88..000000000 --- a/testhal/STM32/STM32F0xx/EXT/main.c +++ /dev/null @@ -1,98 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void led4off(void *arg) { - - (void)arg; - palClearPad(GPIOC, GPIOC_LED4); -} - -/* Triggered when the button is pressed or released. The LED4 is set to ON.*/ -static void extcb1(EXTDriver *extp, expchannel_t channel) { - static virtual_timer_t vt4; - - (void)extp; - (void)channel; - palSetPad(GPIOC, GPIOC_LED4); - chSysLockFromISR(); - chVTResetI(&vt4); - /* LED4 set to OFF after 200mS.*/ - chVTSetI(&vt4, MS2ST(200), led4off, NULL); - chSysUnlockFromISR(); -} - -static const EXTConfig extcfg = { - { - {EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOA, extcb1}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL} - } -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the EXT driver 1. - */ - extStart(&EXTD1, &extcfg); - - /* - * Normal main() thread activity, in this demo it enables and disables the - * button EXT channel using 5 seconds intervals. - */ - while (true) { - chThdSleepMilliseconds(5000); - extChannelDisable(&EXTD1, 0); - chThdSleepMilliseconds(5000); - extChannelEnable(&EXTD1, 0); - } -} diff --git a/testhal/STM32/STM32F0xx/EXT/mcuconf.h b/testhal/STM32/STM32F0xx/EXT/mcuconf.h deleted file mode 100644 index eed60c869..000000000 --- a/testhal/STM32/STM32F0xx/EXT/mcuconf.h +++ /dev/null @@ -1,200 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F0xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 3...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F0xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_HSI14_ENABLED TRUE -#define STM32_HSI48_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 12 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE STM32_PPRE_DIV1 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_MCOPRE STM32_MCOPRE_DIV1 -#define STM32_PLLNODIV STM32_PLLNODIV_DIV2 -#define STM32_USBSW STM32_USBSW_HSI48 -#define STM32_CECSW STM32_CECSW_HSI -#define STM32_I2C1SW STM32_I2C1SW_HSI -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_CKMODE STM32_ADC_CKMODE_ADCCLK -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_20_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI21_22_IRQ_PRIORITY 3 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 2 -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 -#define STM32_GPT_TIM3_IRQ_PRIORITY 2 -#define STM32_GPT_TIM14_IRQ_PRIORITY 2 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * I2S driver system settings. - */ -#define STM32_I2S_USE_SPI1 FALSE -#define STM32_I2S_USE_SPI2 FALSE -#define STM32_I2S_SPI1_MODE (STM32_I2S_MODE_MASTER | \ - STM32_I2S_MODE_RX) -#define STM32_I2S_SPI2_MODE (STM32_I2S_MODE_MASTER | \ - STM32_I2S_MODE_RX) -#define STM32_I2S_SPI1_IRQ_PRIORITY 2 -#define STM32_I2S_SPI2_IRQ_PRIORITY 2 -#define STM32_I2S_SPI1_DMA_PRIORITY 1 -#define STM32_I2S_SPI2_DMA_PRIORITY 1 -#define STM32_I2S_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2S_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 3 -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 -#define STM32_ICU_TIM3_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 3 -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 -#define STM32_PWM_TIM3_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 2 -#define STM32_SPI_SPI2_IRQ_PRIORITY 2 -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ diff --git a/testhal/STM32/STM32F0xx/EXT/readme.txt b/testhal/STM32/STM32F0xx/EXT/readme.txt deleted file mode 100644 index d6a102d2b..000000000 --- a/testhal/STM32/STM32F0xx/EXT/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/HAL - EXT driver demo for STM32F0xx. ** -***************************************************************************** - -** TARGET ** - -The demo will on an STMicroelectronics STM32F0-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F0xx EXT driver. - -** Board Setup ** - -None required. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32/STM32F0xx/IRQ_STORM/Makefile b/testhal/STM32/STM32F0xx/IRQ_STORM/Makefile index 77e32749c..0ebd3a758 100644 --- a/testhal/STM32/STM32F0xx/IRQ_STORM/Makefile +++ b/testhal/STM32/STM32F0xx/IRQ_STORM/Makefile @@ -94,8 +94,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F051x8.ld diff --git a/testhal/STM32/STM32F0xx/PWM-ICU/Makefile b/testhal/STM32/STM32F0xx/PWM-ICU/Makefile index 5519eb0ba..6eefd756b 100644 --- a/testhal/STM32/STM32F0xx/PWM-ICU/Makefile +++ b/testhal/STM32/STM32F0xx/PWM-ICU/Makefile @@ -94,8 +94,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F051x8.ld diff --git a/testhal/STM32/STM32F0xx/SPI/Makefile b/testhal/STM32/STM32F0xx/SPI/Makefile index 5519eb0ba..6eefd756b 100644 --- a/testhal/STM32/STM32F0xx/SPI/Makefile +++ b/testhal/STM32/STM32F0xx/SPI/Makefile @@ -94,8 +94,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F051x8.ld diff --git a/testhal/STM32/STM32F0xx/UART/Makefile b/testhal/STM32/STM32F0xx/UART/Makefile index 5519eb0ba..6eefd756b 100644 --- a/testhal/STM32/STM32F0xx/UART/Makefile +++ b/testhal/STM32/STM32F0xx/UART/Makefile @@ -94,8 +94,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F051x8.ld diff --git a/testhal/STM32/STM32F0xx/UART/main.c b/testhal/STM32/STM32F0xx/UART/main.c index 08c60b9ad..d0777e637 100644 --- a/testhal/STM32/STM32F0xx/UART/main.c +++ b/testhal/STM32/STM32F0xx/UART/main.c @@ -53,7 +53,7 @@ static void txend2(UARTDriver *uartp) { palClearPad(GPIOC, GPIOC_LED4); chSysLockFromISR(); chVTResetI(&vt1); - chVTSetI(&vt1, MS2ST(5000), restart, NULL); + chVTSetI(&vt1, TIME_MS2I(5000), restart, NULL); chSysUnlockFromISR(); } @@ -79,7 +79,7 @@ static void rxchar(UARTDriver *uartp, uint16_t c) { palSetPad(GPIOC, GPIOC_LED4); chSysLockFromISR(); chVTResetI(&vt2); - chVTSetI(&vt2, MS2ST(200), ledoff, NULL); + chVTSetI(&vt2, TIME_MS2I(200), ledoff, NULL); chSysUnlockFromISR(); } diff --git a/testhal/STM32/STM32F0xx/WDG/Makefile b/testhal/STM32/STM32F0xx/WDG/Makefile index 5519eb0ba..6eefd756b 100644 --- a/testhal/STM32/STM32F0xx/WDG/Makefile +++ b/testhal/STM32/STM32F0xx/WDG/Makefile @@ -94,8 +94,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F051x8.ld diff --git a/testhal/STM32/STM32F1xx/ADC/Makefile b/testhal/STM32/STM32F1xx/ADC/Makefile index c136795b9..119141822 100644 --- a/testhal/STM32/STM32F1xx/ADC/Makefile +++ b/testhal/STM32/STM32F1xx/ADC/Makefile @@ -99,8 +99,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F103xB.ld diff --git a/testhal/STM32/STM32F1xx/CAN/Makefile b/testhal/STM32/STM32F1xx/CAN/Makefile index c136795b9..119141822 100644 --- a/testhal/STM32/STM32F1xx/CAN/Makefile +++ b/testhal/STM32/STM32F1xx/CAN/Makefile @@ -99,8 +99,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F103xB.ld diff --git a/testhal/STM32/STM32F1xx/CAN/main.c b/testhal/STM32/STM32F1xx/CAN/main.c index 7b05c028d..2f8d1f42c 100644 --- a/testhal/STM32/STM32F1xx/CAN/main.c +++ b/testhal/STM32/STM32F1xx/CAN/main.c @@ -40,7 +40,7 @@ static THD_FUNCTION(can_rx, p) { chRegSetThreadName("receiver"); chEvtRegister(&CAND1.rxfull_event, &el, 0); while (true) { - if (chEvtWaitAnyTimeout(ALL_EVENTS, MS2ST(100)) == 0) + if (chEvtWaitAnyTimeout(ALL_EVENTS, TIME_MS2I(100)) == 0) continue; while (canReceive(&CAND1, CAN_ANY_MAILBOX, &rxmsg, TIME_IMMEDIATE) == MSG_OK) { /* Process message.*/ @@ -67,7 +67,7 @@ static THD_FUNCTION(can_tx, p) { txmsg.data32[1] = 0x00FF00FF; while (true) { - canTransmit(&CAND1, CAN_ANY_MAILBOX, &txmsg, MS2ST(100)); + canTransmit(&CAND1, CAN_ANY_MAILBOX, &txmsg, TIME_MS2I(100)); chThdSleepMilliseconds(500); } } diff --git a/testhal/STM32/STM32F1xx/EXT/.cproject b/testhal/STM32/STM32F1xx/EXT/.cproject deleted file mode 100644 index 5afcfb4ad..000000000 --- a/testhal/STM32/STM32F1xx/EXT/.cproject +++ /dev/null @@ -1,56 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32/STM32F1xx/EXT/.project b/testhal/STM32/STM32F1xx/EXT/.project deleted file mode 100644 index 41d3deffa..000000000 --- a/testhal/STM32/STM32F1xx/EXT/.project +++ /dev/null @@ -1,33 +0,0 @@ - - - STM32F1xx-EXT - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32/STM32F1xx/EXT/Makefile b/testhal/STM32/STM32F1xx/EXT/Makefile deleted file mode 100644 index c136795b9..000000000 --- a/testhal/STM32/STM32F1xx/EXT/Makefile +++ /dev/null @@ -1,220 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../.. -# Startup files. -include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f1xx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F1xx/platform.mk -include $(CHIBIOS)/os/hal/boards/OLIMEX_STM32_P103/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -#include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/STM32F103xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F1xx/EXT/chconf.h b/testhal/STM32/STM32F1xx/EXT/chconf.h deleted file mode 100644 index ce365633d..000000000 --- a/testhal/STM32/STM32F1xx/EXT/chconf.h +++ /dev/null @@ -1,580 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_5_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_OBJ_FIFOS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#define CH_CFG_USE_FACTORY TRUE - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 - -/** - * @brief Enables the registry of generic objects. - */ -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE - -/** - * @brief Enables factory for generic buffers. - */ -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE - -/** - * @brief Enables factory for semaphores. - */ -#define CH_CFG_FACTORY_SEMAPHORES TRUE - -/** - * @brief Enables factory for mailboxes. - */ -#define CH_CFG_FACTORY_MAILBOXES TRUE - -/** - * @brief Enables factory for objects FIFOs. - */ -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/testhal/STM32/STM32F1xx/EXT/halconf.h b/testhal/STM32/STM32F1xx/EXT/halconf.h deleted file mode 100644 index 9095470fd..000000000 --- a/testhal/STM32/STM32F1xx/EXT/halconf.h +++ /dev/null @@ -1,417 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the QSPI subsystem. - */ -#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) -#define HAL_USE_QSPI FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/testhal/STM32/STM32F1xx/EXT/main.c b/testhal/STM32/STM32F1xx/EXT/main.c deleted file mode 100644 index 0740db078..000000000 --- a/testhal/STM32/STM32F1xx/EXT/main.c +++ /dev/null @@ -1,98 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static virtual_timer_t vt; - -/* LED set to OFF after 200mS.*/ -static void ledoff(void *arg) { - - (void)arg; - palSetPad(GPIOC, GPIOC_LED); -} - -/* Triggered when the button is pressed or released. The LED is set to ON.*/ -static void extcb1(EXTDriver *extp, expchannel_t channel) { - - (void)extp; - (void)channel; - palClearPad(GPIOC, GPIOC_LED); - chSysLockFromISR(); - chVTSetI(&vt, MS2ST(200), ledoff, NULL); - chSysUnlockFromISR(); -} - -/* Triggered when the LED goes OFF.*/ -static void extcb2(EXTDriver *extp, expchannel_t channel) { - - (void)extp; - (void)channel; -} - -static const EXTConfig extcfg = { - { - {EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOA, extcb1}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_RISING_EDGE | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOC, extcb2}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL} - } -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the EXT driver 1. - */ - extStart(&EXTD1, &extcfg); - - /* - * Normal main() thread activity, in this demo it enables and disables the - * button EXT channel using 5 seconds intervals. - */ - while (true) { - chThdSleepMilliseconds(5000); - extChannelDisable(&EXTD1, 0); - chThdSleepMilliseconds(5000); - extChannelEnable(&EXTD1, 0); - } -} diff --git a/testhal/STM32/STM32F1xx/EXT/mcuconf.h b/testhal/STM32/STM32F1xx/EXT/mcuconf.h deleted file mode 100644 index 49f082ab6..000000000 --- a/testhal/STM32/STM32F1xx/EXT/mcuconf.h +++ /dev/null @@ -1,214 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -#define STM32F103_MCUCONF - -/* - * STM32F103 drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_RTCSEL STM32_RTCSEL_HSEDIV -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * RTC driver system settings. - */ -#define STM32_RTC_IRQ_PRIORITY 15 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ diff --git a/testhal/STM32/STM32F1xx/EXT/readme.txt b/testhal/STM32/STM32F1xx/EXT/readme.txt deleted file mode 100644 index c73ec64e0..000000000 --- a/testhal/STM32/STM32F1xx/EXT/readme.txt +++ /dev/null @@ -1,26 +0,0 @@ -***************************************************************************** -** ChibiOS/HAL - EXT driver demo for STM32. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an Olimex STM32-P103 board. - -** The Demo ** - -The application demonstrates the use of the STM32 EXT driver. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32/STM32F1xx/I2C/Makefile b/testhal/STM32/STM32F1xx/I2C/Makefile index cda1e560f..411a34940 100644 --- a/testhal/STM32/STM32F1xx/I2C/Makefile +++ b/testhal/STM32/STM32F1xx/I2C/Makefile @@ -99,8 +99,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F103xB.ld diff --git a/testhal/STM32/STM32F1xx/IRQ_STORM/Makefile b/testhal/STM32/STM32F1xx/IRQ_STORM/Makefile index 251e0aa9f..aa30a875c 100644 --- a/testhal/STM32/STM32F1xx/IRQ_STORM/Makefile +++ b/testhal/STM32/STM32F1xx/IRQ_STORM/Makefile @@ -99,8 +99,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F103xB.ld diff --git a/testhal/STM32/STM32F1xx/PWM-ICU/Makefile b/testhal/STM32/STM32F1xx/PWM-ICU/Makefile index c136795b9..119141822 100644 --- a/testhal/STM32/STM32F1xx/PWM-ICU/Makefile +++ b/testhal/STM32/STM32F1xx/PWM-ICU/Makefile @@ -99,8 +99,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F103xB.ld diff --git a/testhal/STM32/STM32F1xx/RTC/Makefile b/testhal/STM32/STM32F1xx/RTC/Makefile index 510fc6ed5..246acaf46 100644 --- a/testhal/STM32/STM32F1xx/RTC/Makefile +++ b/testhal/STM32/STM32F1xx/RTC/Makefile @@ -99,8 +99,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F103xB.ld diff --git a/testhal/STM32/STM32F1xx/SPI/Makefile b/testhal/STM32/STM32F1xx/SPI/Makefile index c136795b9..119141822 100644 --- a/testhal/STM32/STM32F1xx/SPI/Makefile +++ b/testhal/STM32/STM32F1xx/SPI/Makefile @@ -99,8 +99,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F103xB.ld diff --git a/testhal/STM32/STM32F1xx/UART/Makefile b/testhal/STM32/STM32F1xx/UART/Makefile index c136795b9..119141822 100644 --- a/testhal/STM32/STM32F1xx/UART/Makefile +++ b/testhal/STM32/STM32F1xx/UART/Makefile @@ -99,8 +99,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F103xB.ld diff --git a/testhal/STM32/STM32F1xx/UART/main.c b/testhal/STM32/STM32F1xx/UART/main.c index 709c74ed4..68859e48a 100644 --- a/testhal/STM32/STM32F1xx/UART/main.c +++ b/testhal/STM32/STM32F1xx/UART/main.c @@ -56,7 +56,7 @@ static void txend2(UARTDriver *uartp) { palSetPad(IOPORT3, GPIOC_LED); chSysLockFromISR(); chVTResetI(&vt1); - chVTDoSetI(&vt1, MS2ST(5000), restart, NULL); + chVTDoSetI(&vt1, TIME_MS2I(5000), restart, NULL); chSysUnlockFromISR(); } @@ -83,7 +83,7 @@ static void rxchar(UARTDriver *uartp, uint16_t c) { palClearPad(IOPORT3, GPIOC_LED); chSysLockFromISR(); chVTResetI(&vt2); - chVTDoSetI(&vt2, MS2ST(200), ledoff, NULL); + chVTDoSetI(&vt2, TIME_MS2I(200), ledoff, NULL); chSysUnlockFromISR(); } diff --git a/testhal/STM32/STM32F2xx/EXT/.cproject b/testhal/STM32/STM32F2xx/EXT/.cproject deleted file mode 100644 index 5d105b37d..000000000 --- a/testhal/STM32/STM32F2xx/EXT/.cproject +++ /dev/null @@ -1,50 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32/STM32F2xx/EXT/.project b/testhal/STM32/STM32F2xx/EXT/.project deleted file mode 100644 index 6689ea36c..000000000 --- a/testhal/STM32/STM32F2xx/EXT/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F2xx-EXT - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_NUCLEO144_F207ZG - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32/STM32F2xx/EXT/Makefile b/testhal/STM32/STM32F2xx/EXT/Makefile deleted file mode 100644 index 38f2b42a3..000000000 --- a/testhal/STM32/STM32F2xx/EXT/Makefile +++ /dev/null @@ -1,220 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../.. -# Startup files. -include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f2xx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/boards/ST_NUCLEO144_F207ZG/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk -include $(CHIBIOS)/os/hal/lib/streams/streams.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/STM32F207xG.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F2xx/EXT/chconf.h b/testhal/STM32/STM32F2xx/EXT/chconf.h deleted file mode 100644 index 0c2c44ee3..000000000 --- a/testhal/STM32/STM32F2xx/EXT/chconf.h +++ /dev/null @@ -1,580 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_5_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_OBJ_FIFOS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#define CH_CFG_USE_FACTORY TRUE - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 - -/** - * @brief Enables the registry of generic objects. - */ -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE - -/** - * @brief Enables factory for generic buffers. - */ -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE - -/** - * @brief Enables factory for semaphores. - */ -#define CH_CFG_FACTORY_SEMAPHORES TRUE - -/** - * @brief Enables factory for mailboxes. - */ -#define CH_CFG_FACTORY_MAILBOXES TRUE - -/** - * @brief Enables factory for objects FIFOs. - */ -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/testhal/STM32/STM32F2xx/EXT/debug/STM32F2xx-EXT (OpenOCD, Flash and Run).launch b/testhal/STM32/STM32F2xx/EXT/debug/STM32F2xx-EXT (OpenOCD, Flash and Run).launch deleted file mode 100644 index 5672721c9..000000000 --- a/testhal/STM32/STM32F2xx/EXT/debug/STM32F2xx-EXT (OpenOCD, Flash and Run).launch +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32/STM32F2xx/EXT/halconf.h b/testhal/STM32/STM32F2xx/EXT/halconf.h deleted file mode 100644 index 9095470fd..000000000 --- a/testhal/STM32/STM32F2xx/EXT/halconf.h +++ /dev/null @@ -1,417 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the QSPI subsystem. - */ -#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) -#define HAL_USE_QSPI FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/testhal/STM32/STM32F2xx/EXT/main.c b/testhal/STM32/STM32F2xx/EXT/main.c deleted file mode 100644 index 490975fc1..000000000 --- a/testhal/STM32/STM32F2xx/EXT/main.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void led5off(void *arg) { - - (void)arg; - palClearPad(GPIOB, GPIOB_LED2); -} - -/* Triggered when the button is pressed or released. The LED5 is set to ON.*/ -static void extcb1(EXTDriver *extp, expchannel_t channel) { - static virtual_timer_t vt4; - - (void)extp; - (void)channel; - - palSetPad(GPIOB, GPIOB_LED2); - chSysLockFromISR(); - chVTResetI(&vt4); - - /* LED4 set to OFF after 200mS.*/ - chVTSetI(&vt4, MS2ST(200), led5off, NULL); - chSysUnlockFromISR(); -} - -static const EXTConfig extcfg = { - { - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOC, extcb1}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL} - } -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the EXT driver 1. - */ - extStart(&EXTD1, &extcfg); - - /* - * Normal main() thread activity, in this demo it enables and disables the - * button EXT channel using 5 seconds intervals. - */ - while (true) { - chThdSleepMilliseconds(5000); - extChannelDisable(&EXTD1, 0); - chThdSleepMilliseconds(5000); - extChannelEnable(&EXTD1, 0); - } -} diff --git a/testhal/STM32/STM32F2xx/EXT/mcuconf.h b/testhal/STM32/STM32F2xx/EXT/mcuconf.h deleted file mode 100644 index 28e7cd969..000000000 --- a/testhal/STM32/STM32F2xx/EXT/mcuconf.h +++ /dev/null @@ -1,342 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F2xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 240 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 5 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 FALSE -#define STM32_DAC_USE_DAC1_CH2 FALSE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * I2S driver system settings. - */ -#define STM32_I2S_USE_SPI2 FALSE -#define STM32_I2S_USE_SPI3 FALSE -#define STM32_I2S_SPI2_IRQ_PRIORITY 10 -#define STM32_I2S_SPI3_IRQ_PRIORITY 10 -#define STM32_I2S_SPI2_DMA_PRIORITY 1 -#define STM32_I2S_SPI3_DMA_PRIORITY 1 -#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SDC driver system settings. - */ -#define STM32_SDC_SDIO_DMA_PRIORITY 3 -#define STM32_SDC_SDIO_IRQ_PRIORITY 9 -#define STM32_SDC_WRITE_TIMEOUT_MS 1000 -#define STM32_SDC_READ_TIMEOUT_MS 1000 -#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 -#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE -#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_UART4 FALSE -#define STM32_UART_USE_UART5 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_UART4_DMA_PRIORITY 0 -#define STM32_UART_UART5_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ diff --git a/testhal/STM32/STM32F2xx/EXT/readme.txt b/testhal/STM32/STM32F2xx/EXT/readme.txt deleted file mode 100644 index f5e58dcbc..000000000 --- a/testhal/STM32/STM32F2xx/EXT/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/HAL - EXT driver demo for STM32F2xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on STM32 Nucleo144-F207ZG. - -** The Demo ** - -The application demonstrates the use of the STM32F2xx EXT driver. - -** Board Setup ** - -None required. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32/STM32F2xx/PWM-ICU/Makefile b/testhal/STM32/STM32F2xx/PWM-ICU/Makefile index 38f2b42a3..bcf88d6f0 100644 --- a/testhal/STM32/STM32F2xx/PWM-ICU/Makefile +++ b/testhal/STM32/STM32F2xx/PWM-ICU/Makefile @@ -98,10 +98,9 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). -include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk -include $(CHIBIOS)/os/hal/lib/streams/streams.mk +#include $(CHIBIOS)/test/lib/test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F207xG.ld diff --git a/testhal/STM32/STM32F37x/ADC/Makefile b/testhal/STM32/STM32F37x/ADC/Makefile index 8f02fb3ae..412ac8d96 100644 --- a/testhal/STM32/STM32F37x/ADC/Makefile +++ b/testhal/STM32/STM32F37x/ADC/Makefile @@ -99,8 +99,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F373xC.ld diff --git a/testhal/STM32/STM32F37x/CAN/Makefile b/testhal/STM32/STM32F37x/CAN/Makefile index 8f02fb3ae..412ac8d96 100644 --- a/testhal/STM32/STM32F37x/CAN/Makefile +++ b/testhal/STM32/STM32F37x/CAN/Makefile @@ -99,8 +99,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F373xC.ld diff --git a/testhal/STM32/STM32F37x/CAN/main.c b/testhal/STM32/STM32F37x/CAN/main.c index cbf8fe6b4..abafc2251 100644 --- a/testhal/STM32/STM32F37x/CAN/main.c +++ b/testhal/STM32/STM32F37x/CAN/main.c @@ -39,7 +39,7 @@ static THD_FUNCTION(can_rx, p) { chRegSetThreadName("receiver"); chEvtRegister(&CAND1.rxfull_event, &el, 0); while (true) { - if (chEvtWaitAnyTimeout(ALL_EVENTS, MS2ST(100)) == 0) + if (chEvtWaitAnyTimeout(ALL_EVENTS, TIME_MS2I(100)) == 0) continue; while (canReceive(&CAND1, CAN_ANY_MAILBOX, &rxmsg, TIME_IMMEDIATE) == MSG_OK) { /* Process message.*/ @@ -66,7 +66,7 @@ static THD_FUNCTION(can_tx, p) { txmsg.data32[1] = 0x00FF00FF; while (true) { - canTransmit(&CAND1, CAN_ANY_MAILBOX, &txmsg, MS2ST(100)); + canTransmit(&CAND1, CAN_ANY_MAILBOX, &txmsg, TIME_MS2I(100)); chThdSleepMilliseconds(500); } } diff --git a/testhal/STM32/STM32F37x/EXT/.cproject b/testhal/STM32/STM32F37x/EXT/.cproject deleted file mode 100644 index e9774d4f9..000000000 --- a/testhal/STM32/STM32F37x/EXT/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32/STM32F37x/EXT/.project b/testhal/STM32/STM32F37x/EXT/.project deleted file mode 100644 index 042fdd5c9..000000000 --- a/testhal/STM32/STM32F37x/EXT/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F37x-EXT - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32373C_EVAL - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32/STM32F37x/EXT/Makefile b/testhal/STM32/STM32F37x/EXT/Makefile deleted file mode 100644 index 8f02fb3ae..000000000 --- a/testhal/STM32/STM32F37x/EXT/Makefile +++ /dev/null @@ -1,220 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../.. -# Startup files. -include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f3xx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F37x/platform.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32373C_EVAL/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -#include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/STM32F373xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F37x/EXT/chconf.h b/testhal/STM32/STM32F37x/EXT/chconf.h deleted file mode 100644 index e4a0797aa..000000000 --- a/testhal/STM32/STM32F37x/EXT/chconf.h +++ /dev/null @@ -1,580 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_5_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_OBJ_FIFOS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#define CH_CFG_USE_FACTORY TRUE - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 - -/** - * @brief Enables the registry of generic objects. - */ -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE - -/** - * @brief Enables factory for generic buffers. - */ -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE - -/** - * @brief Enables factory for semaphores. - */ -#define CH_CFG_FACTORY_SEMAPHORES TRUE - -/** - * @brief Enables factory for mailboxes. - */ -#define CH_CFG_FACTORY_MAILBOXES TRUE - -/** - * @brief Enables factory for objects FIFOs. - */ -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/testhal/STM32/STM32F37x/EXT/halconf.h b/testhal/STM32/STM32F37x/EXT/halconf.h deleted file mode 100644 index 9095470fd..000000000 --- a/testhal/STM32/STM32F37x/EXT/halconf.h +++ /dev/null @@ -1,417 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the QSPI subsystem. - */ -#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) -#define HAL_USE_QSPI FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/testhal/STM32/STM32F37x/EXT/main.c b/testhal/STM32/STM32F37x/EXT/main.c deleted file mode 100644 index dc4b02cc8..000000000 --- a/testhal/STM32/STM32F37x/EXT/main.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void led5off(void *arg) { - - (void)arg; - palSetPad(GPIOC, GPIOC_LED1); -} - -/* Triggered when the button is pressed or released. The LED5 is set to ON.*/ -static void extcb1(EXTDriver *extp, expchannel_t channel) { - static virtual_timer_t vt4; - - (void)extp; - (void)channel; - - palClearPad(GPIOC, GPIOC_LED1); - chSysLockFromISR(); - chVTResetI(&vt4); - - /* LED4 set to OFF after 200mS.*/ - chVTDoSetI(&vt4, MS2ST(200), led5off, NULL); - chSysUnlockFromISR(); -} - -static const EXTConfig extcfg = { - { - {EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOA, extcb1}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL} - } -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the EXT driver 1. - */ - extStart(&EXTD1, &extcfg); - - /* - * Normal main() thread activity, in this demo it enables and disables the - * button EXT channel using 5 seconds intervals. - */ - while (true) { - chThdSleepMilliseconds(5000); - extChannelDisable(&EXTD1, 0); - chThdSleepMilliseconds(5000); - extChannelEnable(&EXTD1, 0); - } -} diff --git a/testhal/STM32/STM32F37x/EXT/mcuconf.h b/testhal/STM32/STM32F37x/EXT/mcuconf.h deleted file mode 100644 index a21072cd7..000000000 --- a/testhal/STM32/STM32F37x/EXT/mcuconf.h +++ /dev/null @@ -1,226 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F30x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F37x_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADCPRE STM32_ADCPRE_DIV4 -#define STM32_SDPRE STM32_SDPRE_DIV12 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_SDADC1 FALSE -#define STM32_ADC_USE_SDADC2 FALSE -#define STM32_ADC_USE_SDADC3 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC1_DMA_PRIORITY 2 -#define STM32_ADC_SDADC2_DMA_PRIORITY 2 -#define STM32_ADC_SDADC3_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_SDADC3_DMA_IRQ_PRIORITY 5 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 TRUE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_23_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ diff --git a/testhal/STM32/STM32F37x/EXT/readme.txt b/testhal/STM32/STM32F37x/EXT/readme.txt deleted file mode 100644 index d6fd9d626..000000000 --- a/testhal/STM32/STM32F37x/EXT/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/HAL - EXT driver demo for STM32F37x. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32373C-EVAL board. - -** The Demo ** - -The application demonstrates the use of the STM32F37x EXT driver. - -** Board Setup ** - -None required. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32/STM32F37x/I2C/Makefile b/testhal/STM32/STM32F37x/I2C/Makefile index 8f02fb3ae..412ac8d96 100644 --- a/testhal/STM32/STM32F37x/I2C/Makefile +++ b/testhal/STM32/STM32F37x/I2C/Makefile @@ -99,8 +99,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F373xC.ld diff --git a/testhal/STM32/STM32F37x/IRQ_STORM/Makefile b/testhal/STM32/STM32F37x/IRQ_STORM/Makefile index be4ac6f2f..55122e019 100644 --- a/testhal/STM32/STM32F37x/IRQ_STORM/Makefile +++ b/testhal/STM32/STM32F37x/IRQ_STORM/Makefile @@ -99,8 +99,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F373xC.ld diff --git a/testhal/STM32/STM32F37x/PWM-ICU/Makefile b/testhal/STM32/STM32F37x/PWM-ICU/Makefile index 8f02fb3ae..412ac8d96 100644 --- a/testhal/STM32/STM32F37x/PWM-ICU/Makefile +++ b/testhal/STM32/STM32F37x/PWM-ICU/Makefile @@ -99,8 +99,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F373xC.ld diff --git a/testhal/STM32/STM32F37x/SDADC/Makefile b/testhal/STM32/STM32F37x/SDADC/Makefile index 8f02fb3ae..412ac8d96 100644 --- a/testhal/STM32/STM32F37x/SDADC/Makefile +++ b/testhal/STM32/STM32F37x/SDADC/Makefile @@ -99,8 +99,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F373xC.ld diff --git a/testhal/STM32/STM32F37x/SPI/Makefile b/testhal/STM32/STM32F37x/SPI/Makefile index 8f02fb3ae..412ac8d96 100644 --- a/testhal/STM32/STM32F37x/SPI/Makefile +++ b/testhal/STM32/STM32F37x/SPI/Makefile @@ -99,8 +99,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F373xC.ld diff --git a/testhal/STM32/STM32F37x/UART/Makefile b/testhal/STM32/STM32F37x/UART/Makefile index 8f02fb3ae..412ac8d96 100644 --- a/testhal/STM32/STM32F37x/UART/Makefile +++ b/testhal/STM32/STM32F37x/UART/Makefile @@ -99,8 +99,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F373xC.ld diff --git a/testhal/STM32/STM32F37x/UART/main.c b/testhal/STM32/STM32F37x/UART/main.c index 431763070..720c328fd 100644 --- a/testhal/STM32/STM32F37x/UART/main.c +++ b/testhal/STM32/STM32F37x/UART/main.c @@ -53,7 +53,7 @@ static void txend2(UARTDriver *uartp) { palSetPad(GPIOC, GPIOC_LED1); chSysLockFromISR(); chVTResetI(&vt1); - chVTDoSetI(&vt1, MS2ST(5000), restart, NULL); + chVTDoSetI(&vt1, TIME_MS2I(5000), restart, NULL); chSysUnlockFromISR(); } @@ -79,7 +79,7 @@ static void rxchar(UARTDriver *uartp, uint16_t c) { palClearPad(GPIOC, GPIOC_LED1); chSysLockFromISR(); chVTResetI(&vt2); - chVTDoSetI(&vt2, MS2ST(200), ledoff, NULL); + chVTDoSetI(&vt2, TIME_MS2I(200), ledoff, NULL); chSysUnlockFromISR(); } diff --git a/testhal/STM32/STM32F3xx/ADC/Makefile b/testhal/STM32/STM32F3xx/ADC/Makefile index ed46ff28f..7acae2819 100644 --- a/testhal/STM32/STM32F3xx/ADC/Makefile +++ b/testhal/STM32/STM32F3xx/ADC/Makefile @@ -99,8 +99,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F303xC.ld diff --git a/testhal/STM32/STM32F3xx/ADC_DUAL/Makefile b/testhal/STM32/STM32F3xx/ADC_DUAL/Makefile index ed46ff28f..7acae2819 100644 --- a/testhal/STM32/STM32F3xx/ADC_DUAL/Makefile +++ b/testhal/STM32/STM32F3xx/ADC_DUAL/Makefile @@ -99,8 +99,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F303xC.ld diff --git a/testhal/STM32/STM32F3xx/CAN/Makefile b/testhal/STM32/STM32F3xx/CAN/Makefile index ed46ff28f..7acae2819 100644 --- a/testhal/STM32/STM32F3xx/CAN/Makefile +++ b/testhal/STM32/STM32F3xx/CAN/Makefile @@ -99,8 +99,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F303xC.ld diff --git a/testhal/STM32/STM32F3xx/CAN/main.c b/testhal/STM32/STM32F3xx/CAN/main.c index c554c0ecd..845ed7562 100644 --- a/testhal/STM32/STM32F3xx/CAN/main.c +++ b/testhal/STM32/STM32F3xx/CAN/main.c @@ -39,7 +39,7 @@ static THD_FUNCTION(can_rx, p) { chRegSetThreadName("receiver"); chEvtRegister(&CAND1.rxfull_event, &el, 0); while (true) { - if (chEvtWaitAnyTimeout(ALL_EVENTS, MS2ST(100)) == 0) + if (chEvtWaitAnyTimeout(ALL_EVENTS, TIME_MS2I(100)) == 0) continue; while (canReceive(&CAND1, CAN_ANY_MAILBOX, &rxmsg, TIME_IMMEDIATE) == MSG_OK) { /* Process message.*/ @@ -66,7 +66,7 @@ static THD_FUNCTION(can_tx, p) { txmsg.data32[1] = 0x00FF00FF; while (true) { - canTransmit(&CAND1, CAN_ANY_MAILBOX, &txmsg, MS2ST(100)); + canTransmit(&CAND1, CAN_ANY_MAILBOX, &txmsg, TIME_MS2I(100)); chThdSleepMilliseconds(500); } } diff --git a/testhal/STM32/STM32F3xx/DAC/Makefile b/testhal/STM32/STM32F3xx/DAC/Makefile index ed46ff28f..7acae2819 100644 --- a/testhal/STM32/STM32F3xx/DAC/Makefile +++ b/testhal/STM32/STM32F3xx/DAC/Makefile @@ -99,8 +99,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F303xC.ld diff --git a/testhal/STM32/STM32F3xx/EXT/.cproject b/testhal/STM32/STM32F3xx/EXT/.cproject deleted file mode 100644 index 281bd5e71..000000000 --- a/testhal/STM32/STM32F3xx/EXT/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32/STM32F3xx/EXT/.project b/testhal/STM32/STM32F3xx/EXT/.project deleted file mode 100644 index 653898605..000000000 --- a/testhal/STM32/STM32F3xx/EXT/.project +++ /dev/null @@ -1,90 +0,0 @@ - - - STM32F3xx-EXT - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32F3_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32/STM32F3xx/EXT/Makefile b/testhal/STM32/STM32F3xx/EXT/Makefile deleted file mode 100644 index ed46ff28f..000000000 --- a/testhal/STM32/STM32F3xx/EXT/Makefile +++ /dev/null @@ -1,220 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../.. -# Startup files. -include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f3xx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F3xx/platform.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -#include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/STM32F303xC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F3xx/EXT/chconf.h b/testhal/STM32/STM32F3xx/EXT/chconf.h deleted file mode 100644 index e4a0797aa..000000000 --- a/testhal/STM32/STM32F3xx/EXT/chconf.h +++ /dev/null @@ -1,580 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_5_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_OBJ_FIFOS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#define CH_CFG_USE_FACTORY TRUE - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 - -/** - * @brief Enables the registry of generic objects. - */ -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE - -/** - * @brief Enables factory for generic buffers. - */ -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE - -/** - * @brief Enables factory for semaphores. - */ -#define CH_CFG_FACTORY_SEMAPHORES TRUE - -/** - * @brief Enables factory for mailboxes. - */ -#define CH_CFG_FACTORY_MAILBOXES TRUE - -/** - * @brief Enables factory for objects FIFOs. - */ -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/testhal/STM32/STM32F3xx/EXT/halconf.h b/testhal/STM32/STM32F3xx/EXT/halconf.h deleted file mode 100644 index 9095470fd..000000000 --- a/testhal/STM32/STM32F3xx/EXT/halconf.h +++ /dev/null @@ -1,417 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the QSPI subsystem. - */ -#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) -#define HAL_USE_QSPI FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/testhal/STM32/STM32F3xx/EXT/main.c b/testhal/STM32/STM32F3xx/EXT/main.c deleted file mode 100644 index cce029a4a..000000000 --- a/testhal/STM32/STM32F3xx/EXT/main.c +++ /dev/null @@ -1,113 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void led5off(void *arg) { - - (void)arg; - palClearPad(GPIOE, GPIOE_LED10_RED); -} - -/* Triggered when the button is pressed or released. The LED5 is set to ON.*/ -static void extcb1(EXTDriver *extp, expchannel_t channel) { - static virtual_timer_t vt4; - - (void)extp; - (void)channel; - - palSetPad(GPIOE, GPIOE_LED10_RED); - chSysLockFromISR(); - - /* Timer reset, if still active.*/ - chVTResetI(&vt4); - - /* LED4 set to OFF after 200mS.*/ - chVTSetI(&vt4, MS2ST(200), led5off, NULL); - chSysUnlockFromISR(); -} - -static const EXTConfig extcfg = { - { - {EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOA, extcb1}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL} - } -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the EXT driver 1. - */ - extStart(&EXTD1, &extcfg); - - /* - * Normal main() thread activity, in this demo it enables and disables the - * button EXT channel using 5 seconds intervals. - */ - while (true) { - chThdSleepMilliseconds(5000); - extChannelDisable(&EXTD1, 0); - chThdSleepMilliseconds(5000); - extChannelEnable(&EXTD1, 0); - } -} diff --git a/testhal/STM32/STM32F3xx/EXT/mcuconf.h b/testhal/STM32/STM32F3xx/EXT/mcuconf.h deleted file mode 100644 index a13fb42f0..000000000 --- a/testhal/STM32/STM32F3xx/EXT/mcuconf.h +++ /dev/null @@ -1,253 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F3xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F3xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PREDIV_VALUE 1 -#define STM32_PLLMUL_VALUE 9 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV2 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 -#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 -#define STM32_USART1SW STM32_USART1SW_PCLK -#define STM32_USART2SW STM32_USART2SW_PCLK -#define STM32_USART3SW STM32_USART3SW_PCLK -#define STM32_UART4SW STM32_UART4SW_PCLK -#define STM32_UART5SW STM32_UART5SW_PCLK -#define STM32_I2C1SW STM32_I2C1SW_SYSCLK -#define STM32_I2C2SW STM32_I2C2SW_SYSCLK -#define STM32_TIM1SW STM32_TIM1SW_PCLK2 -#define STM32_TIM8SW STM32_TIM8SW_PCLK2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_USB_CLOCK_REQUIRED TRUE -#define STM32_USBPRE STM32_USBPRE_DIV1P5 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_DUAL_MODE FALSE -#define STM32_ADC_COMPACT_SAMPLES FALSE -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_USE_ADC4 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_ADC4_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_IRQ_PRIORITY 5 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 -#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 TRUE -#define STM32_DAC_USE_DAC1_CH2 TRUE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 10 -#define STM32_I2C_I2C2_IRQ_PRIORITY 10 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ diff --git a/testhal/STM32/STM32F3xx/EXT/readme.txt b/testhal/STM32/STM32F3xx/EXT/readme.txt deleted file mode 100644 index e38ba66a6..000000000 --- a/testhal/STM32/STM32F3xx/EXT/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/HAL - EXT driver demo for STM32F3xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F3-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F3xx EXT driver. - -** Board Setup ** - -None required. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32/STM32F3xx/IRQ_STORM/Makefile b/testhal/STM32/STM32F3xx/IRQ_STORM/Makefile index 79d12f450..7340ba8b1 100644 --- a/testhal/STM32/STM32F3xx/IRQ_STORM/Makefile +++ b/testhal/STM32/STM32F3xx/IRQ_STORM/Makefile @@ -99,8 +99,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F303xC.ld diff --git a/testhal/STM32/STM32F3xx/PWM-ICU/Makefile b/testhal/STM32/STM32F3xx/PWM-ICU/Makefile index ed46ff28f..7acae2819 100644 --- a/testhal/STM32/STM32F3xx/PWM-ICU/Makefile +++ b/testhal/STM32/STM32F3xx/PWM-ICU/Makefile @@ -99,8 +99,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F303xC.ld diff --git a/testhal/STM32/STM32F3xx/SPI/Makefile b/testhal/STM32/STM32F3xx/SPI/Makefile index ed46ff28f..7acae2819 100644 --- a/testhal/STM32/STM32F3xx/SPI/Makefile +++ b/testhal/STM32/STM32F3xx/SPI/Makefile @@ -99,8 +99,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F303xC.ld diff --git a/testhal/STM32/STM32F3xx/UART/Makefile b/testhal/STM32/STM32F3xx/UART/Makefile index ed46ff28f..7acae2819 100644 --- a/testhal/STM32/STM32F3xx/UART/Makefile +++ b/testhal/STM32/STM32F3xx/UART/Makefile @@ -99,8 +99,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F303xC.ld diff --git a/testhal/STM32/STM32F3xx/UART/main.c b/testhal/STM32/STM32F3xx/UART/main.c index 1ef5bb6b9..cf88c2448 100644 --- a/testhal/STM32/STM32F3xx/UART/main.c +++ b/testhal/STM32/STM32F3xx/UART/main.c @@ -53,7 +53,7 @@ static void txend2(UARTDriver *uartp) { palClearPad(GPIOE, GPIOE_LED3_RED); chSysLockFromISR(); chVTResetI(&vt1); - chVTSetI(&vt1, MS2ST(5000), restart, NULL); + chVTSetI(&vt1, TIME_MS2I(5000), restart, NULL); chSysUnlockFromISR(); } @@ -79,7 +79,7 @@ static void rxchar(UARTDriver *uartp, uint16_t c) { palSetPad(GPIOE, GPIOE_LED3_RED); chSysLockFromISR(); chVTResetI(&vt2); - chVTSetI(&vt2, MS2ST(200), ledoff, NULL); + chVTSetI(&vt2, TIME_MS2I(200), ledoff, NULL); chSysUnlockFromISR(); } diff --git a/testhal/STM32/STM32F3xx/WDG/Makefile b/testhal/STM32/STM32F3xx/WDG/Makefile index ed46ff28f..7acae2819 100644 --- a/testhal/STM32/STM32F3xx/WDG/Makefile +++ b/testhal/STM32/STM32F3xx/WDG/Makefile @@ -99,8 +99,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F303xC.ld diff --git a/testhal/STM32/STM32F4xx/EXT/.cproject b/testhal/STM32/STM32F4xx/EXT/.cproject deleted file mode 100644 index 5d105b37d..000000000 --- a/testhal/STM32/STM32F4xx/EXT/.cproject +++ /dev/null @@ -1,50 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32/STM32F4xx/EXT/.project b/testhal/STM32/STM32F4xx/EXT/.project deleted file mode 100644 index 5e621fa15..000000000 --- a/testhal/STM32/STM32F4xx/EXT/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32F4xx-EXT - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32F4_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32/STM32F4xx/EXT/Makefile b/testhal/STM32/STM32F4xx/EXT/Makefile deleted file mode 100644 index d9517428c..000000000 --- a/testhal/STM32/STM32F4xx/EXT/Makefile +++ /dev/null @@ -1,220 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../.. -# Startup files. -include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f4xx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -#include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/STM32F407xG.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32F4xx/EXT/chconf.h b/testhal/STM32/STM32F4xx/EXT/chconf.h deleted file mode 100644 index e4a0797aa..000000000 --- a/testhal/STM32/STM32F4xx/EXT/chconf.h +++ /dev/null @@ -1,580 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_5_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_OBJ_FIFOS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#define CH_CFG_USE_FACTORY TRUE - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 - -/** - * @brief Enables the registry of generic objects. - */ -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE - -/** - * @brief Enables factory for generic buffers. - */ -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE - -/** - * @brief Enables factory for semaphores. - */ -#define CH_CFG_FACTORY_SEMAPHORES TRUE - -/** - * @brief Enables factory for mailboxes. - */ -#define CH_CFG_FACTORY_MAILBOXES TRUE - -/** - * @brief Enables factory for objects FIFOs. - */ -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/testhal/STM32/STM32F4xx/EXT/debug/STM32F4xx-EXT (OpenOCD, Flash and Run).launch b/testhal/STM32/STM32F4xx/EXT/debug/STM32F4xx-EXT (OpenOCD, Flash and Run).launch deleted file mode 100644 index 1ffc4ea58..000000000 --- a/testhal/STM32/STM32F4xx/EXT/debug/STM32F4xx-EXT (OpenOCD, Flash and Run).launch +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32/STM32F4xx/EXT/halconf.h b/testhal/STM32/STM32F4xx/EXT/halconf.h deleted file mode 100644 index 9095470fd..000000000 --- a/testhal/STM32/STM32F4xx/EXT/halconf.h +++ /dev/null @@ -1,417 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the QSPI subsystem. - */ -#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) -#define HAL_USE_QSPI FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/testhal/STM32/STM32F4xx/EXT/main.c b/testhal/STM32/STM32F4xx/EXT/main.c deleted file mode 100644 index 377d97c2c..000000000 --- a/testhal/STM32/STM32F4xx/EXT/main.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void led5off(void *arg) { - - (void)arg; - palClearPad(GPIOD, GPIOD_LED5); -} - -/* Triggered when the button is pressed or released. The LED5 is set to ON.*/ -static void extcb1(EXTDriver *extp, expchannel_t channel) { - static virtual_timer_t vt4; - - (void)extp; - (void)channel; - - palSetPad(GPIOD, GPIOD_LED5); - chSysLockFromISR(); - chVTResetI(&vt4); - - /* LED4 set to OFF after 200mS.*/ - chVTSetI(&vt4, MS2ST(200), led5off, NULL); - chSysUnlockFromISR(); -} - -static const EXTConfig extcfg = { - { - {EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOA, extcb1}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL} - } -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the EXT driver 1. - */ - extStart(&EXTD1, &extcfg); - - /* - * Normal main() thread activity, in this demo it enables and disables the - * button EXT channel using 5 seconds intervals. - */ - while (true) { - chThdSleepMilliseconds(5000); - extChannelDisable(&EXTD1, 0); - chThdSleepMilliseconds(5000); - extChannelEnable(&EXTD1, 0); - } -} diff --git a/testhal/STM32/STM32F4xx/EXT/mcuconf.h b/testhal/STM32/STM32F4xx/EXT/mcuconf.h deleted file mode 100644 index 671f9184e..000000000 --- a/testhal/STM32/STM32F4xx/EXT/mcuconf.h +++ /dev/null @@ -1,342 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 FALSE -#define STM32_DAC_USE_DAC1_CH2 FALSE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * I2S driver system settings. - */ -#define STM32_I2S_USE_SPI2 FALSE -#define STM32_I2S_USE_SPI3 FALSE -#define STM32_I2S_SPI2_IRQ_PRIORITY 10 -#define STM32_I2S_SPI3_IRQ_PRIORITY 10 -#define STM32_I2S_SPI2_DMA_PRIORITY 1 -#define STM32_I2S_SPI3_DMA_PRIORITY 1 -#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SDC driver system settings. - */ -#define STM32_SDC_SDIO_DMA_PRIORITY 3 -#define STM32_SDC_SDIO_IRQ_PRIORITY 9 -#define STM32_SDC_WRITE_TIMEOUT_MS 1000 -#define STM32_SDC_READ_TIMEOUT_MS 1000 -#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 -#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE -#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_UART4 FALSE -#define STM32_UART_USE_UART5 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_UART4_DMA_PRIORITY 0 -#define STM32_UART_UART5_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ diff --git a/testhal/STM32/STM32F4xx/EXT/readme.txt b/testhal/STM32/STM32F4xx/EXT/readme.txt deleted file mode 100644 index 24ad359c2..000000000 --- a/testhal/STM32/STM32F4xx/EXT/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/HAL - EXT driver demo for STM32F4xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STMicroelectronics STM32F4-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32F4xx EXT driver. - -** Board Setup ** - -None required. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32/STM32L0xx/EXT/.cproject b/testhal/STM32/STM32L0xx/EXT/.cproject deleted file mode 100644 index b2cb4ed7e..000000000 --- a/testhal/STM32/STM32L0xx/EXT/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32/STM32L0xx/EXT/.project b/testhal/STM32/STM32L0xx/EXT/.project deleted file mode 100644 index f2578e6d2..000000000 --- a/testhal/STM32/STM32L0xx/EXT/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32L0xx-EXT - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_NUCLEO64_L053R8 - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32/STM32L0xx/EXT/Makefile b/testhal/STM32/STM32L0xx/EXT/Makefile deleted file mode 100644 index b37ebfa09..000000000 --- a/testhal/STM32/STM32L0xx/EXT/Makefile +++ /dev/null @@ -1,220 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x200 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../.. -# Startup files. -include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32l0xx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32L0xx/platform.mk -include $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_L053R8/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk -# Other files (optional). -#include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/STM32L053x8.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m0 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32L0xx/EXT/chconf.h b/testhal/STM32/STM32L0xx/EXT/chconf.h deleted file mode 100644 index c7a415dd3..000000000 --- a/testhal/STM32/STM32L0xx/EXT/chconf.h +++ /dev/null @@ -1,580 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_5_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM FALSE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_OBJ_FIFOS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#define CH_CFG_USE_FACTORY TRUE - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 - -/** - * @brief Enables the registry of generic objects. - */ -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE - -/** - * @brief Enables factory for generic buffers. - */ -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE - -/** - * @brief Enables factory for semaphores. - */ -#define CH_CFG_FACTORY_SEMAPHORES TRUE - -/** - * @brief Enables factory for mailboxes. - */ -#define CH_CFG_FACTORY_MAILBOXES TRUE - -/** - * @brief Enables factory for objects FIFOs. - */ -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/testhal/STM32/STM32L0xx/EXT/debug/STM32L0xx-EXT (OpenOCD, Flash and Run).launch b/testhal/STM32/STM32L0xx/EXT/debug/STM32L0xx-EXT (OpenOCD, Flash and Run).launch deleted file mode 100644 index 621f8bf08..000000000 --- a/testhal/STM32/STM32L0xx/EXT/debug/STM32L0xx-EXT (OpenOCD, Flash and Run).launch +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32/STM32L0xx/EXT/halconf.h b/testhal/STM32/STM32L0xx/EXT/halconf.h deleted file mode 100644 index 9095470fd..000000000 --- a/testhal/STM32/STM32L0xx/EXT/halconf.h +++ /dev/null @@ -1,417 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the QSPI subsystem. - */ -#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) -#define HAL_USE_QSPI FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/testhal/STM32/STM32L0xx/EXT/main.c b/testhal/STM32/STM32L0xx/EXT/main.c deleted file mode 100644 index 2eceab274..000000000 --- a/testhal/STM32/STM32L0xx/EXT/main.c +++ /dev/null @@ -1,98 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void led4off(void *arg) { - - (void)arg; - palClearPad(GPIOA, GPIOA_LED_GREEN); -} - -/* Triggered when the button is pressed or released. The LED4 is set to ON.*/ -static void extcb1(EXTDriver *extp, expchannel_t channel) { - static virtual_timer_t vt4; - - (void)extp; - (void)channel; - palSetPad(GPIOA, GPIOA_LED_GREEN); - chSysLockFromISR(); - chVTResetI(&vt4); - /* LED4 set to OFF after 200mS.*/ - chVTSetI(&vt4, MS2ST(200), led4off, NULL); - chSysUnlockFromISR(); -} - -static const EXTConfig extcfg = { - { - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOC, extcb1}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL} - } -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the EXT driver 1. - */ - extStart(&EXTD1, &extcfg); - - /* - * Normal main() thread activity, in this demo it enables and disables the - * button EXT channel using 5 seconds intervals. - */ - while (true) { - chThdSleepMilliseconds(5000); - extChannelDisable(&EXTD1, 13); - chThdSleepMilliseconds(5000); - extChannelEnable(&EXTD1, 13); - } -} diff --git a/testhal/STM32/STM32L0xx/EXT/mcuconf.h b/testhal/STM32/STM32L0xx/EXT/mcuconf.h deleted file mode 100644 index 2c9bd2422..000000000 --- a/testhal/STM32/STM32L0xx/EXT/mcuconf.h +++ /dev/null @@ -1,177 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32L1xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32L0xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_VOS STM32_VOS_1P8 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI16_ENABLED TRUE -#define STM32_HSI16_DIVIDER_ENABLED FALSE -#define STM32_LSI_ENABLED FALSE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED TRUE -#define STM32_ADC_CLOCK_ENABLED TRUE -#define STM32_USB_CLOCK_ENABLED TRUE -#define STM32_MSIRANGE STM32_MSIRANGE_2M -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI16 -#define STM32_PLLMUL_VALUE 4 -#define STM32_PLLDIV_VALUE 2 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV1 -#define STM32_PPRE2 STM32_PPRE2_DIV1 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_MCOPRE STM32_MCOPRE_DIV1 -#define STM32_RTCSEL STM32_RTCSEL_LSE -#define STM32_RTCPRE STM32_RTCPRE_DIV2 -#define STM32_USART1SEL STM32_USART1SEL_APB -#define STM32_USART2SEL STM32_USART2SEL_APB -#define STM32_LPUART1SEL STM32_LPUART1SEL_APB -#define STM32_I2C1SEL STM32_I2C1SEL_APB -#define STM32_LPTIM1SEL STM32_LPTIM1SEL_APB -#define STM32_HSI48SEL STM32_HSI48SEL_HSI48 - -/* - * ADC driver system settings. - * Note, IRQ is shared with EXT channels 21 and 22. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_CKMODE STM32_ADC_CKMODE_ADCCLK -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_ADC_PRESCALER_VALUE 1 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI17_20_IRQ_PRIORITY 3 -#define STM32_EXT_EXTI21_22_IRQ_PRIORITY 3 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 2 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 3 -#define STM32_I2C_I2C2_IRQ_PRIORITY 3 -#define STM32_I2C_USE_DMA TRUE -#define STM32_I2C_I2C1_DMA_PRIORITY 1 -#define STM32_I2C_I2C2_DMA_PRIORITY 1 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 3 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 3 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_LPUART1 FALSE -#define STM32_SERIAL_USART1_PRIORITY 3 -#define STM32_SERIAL_USART2_PRIORITY 3 -#define STM32_SERIAL_LPUART1_PRIORITY 3 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 1 -#define STM32_SPI_SPI2_IRQ_PRIORITY 1 -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 2 -#define STM32_ST_USE_TIMER 21 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 3 -#define STM32_UART_USART2_IRQ_PRIORITY 3 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ diff --git a/testhal/STM32/STM32L0xx/EXT/readme.txt b/testhal/STM32/STM32L0xx/EXT/readme.txt deleted file mode 100644 index 12f201f2b..000000000 --- a/testhal/STM32/STM32L0xx/EXT/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/HAL - EXT driver demo for STM32L0xx. ** -***************************************************************************** - -** TARGET ** - -The demo will on an ST STM32L053R8-NUCLEO board. - -** The Demo ** - -The application demonstrates the use of the STM32F0xx EXT driver. - -** Board Setup ** - -None required. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32/STM32L1xx/EXT/.cproject b/testhal/STM32/STM32L1xx/EXT/.cproject deleted file mode 100644 index 0e25eaf88..000000000 --- a/testhal/STM32/STM32L1xx/EXT/.cproject +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32/STM32L1xx/EXT/.project b/testhal/STM32/STM32L1xx/EXT/.project deleted file mode 100644 index 9b70efede..000000000 --- a/testhal/STM32/STM32L1xx/EXT/.project +++ /dev/null @@ -1,38 +0,0 @@ - - - STM32L1xx-EXT - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_STM32L_DISCOVERY - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32/STM32L1xx/EXT/Makefile b/testhal/STM32/STM32L1xx/EXT/Makefile deleted file mode 100644 index c69af8cfa..000000000 --- a/testhal/STM32/STM32L1xx/EXT/Makefile +++ /dev/null @@ -1,220 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../.. -# Startup files. -include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32l1xx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32L1xx/platform.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32L_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -#include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/STM32L152xB.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m3 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32L1xx/EXT/chconf.h b/testhal/STM32/STM32L1xx/EXT/chconf.h deleted file mode 100644 index 566d7ecf3..000000000 --- a/testhal/STM32/STM32L1xx/EXT/chconf.h +++ /dev/null @@ -1,580 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_5_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 16 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_OBJ_FIFOS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#define CH_CFG_USE_FACTORY TRUE - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 - -/** - * @brief Enables the registry of generic objects. - */ -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE - -/** - * @brief Enables factory for generic buffers. - */ -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE - -/** - * @brief Enables factory for semaphores. - */ -#define CH_CFG_FACTORY_SEMAPHORES TRUE - -/** - * @brief Enables factory for mailboxes. - */ -#define CH_CFG_FACTORY_MAILBOXES TRUE - -/** - * @brief Enables factory for objects FIFOs. - */ -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/testhal/STM32/STM32L1xx/EXT/halconf.h b/testhal/STM32/STM32L1xx/EXT/halconf.h deleted file mode 100644 index bba7301f0..000000000 --- a/testhal/STM32/STM32L1xx/EXT/halconf.h +++ /dev/null @@ -1,424 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#include "mcuconf.h" - -/** - * @brief Enables the TM subsystem. - */ -#if !defined(HAL_USE_TM) || defined(__DOXYGEN__) -#define HAL_USE_TM TRUE -#endif - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the QSPI subsystem. - */ -#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) -#define HAL_USE_QSPI FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/testhal/STM32/STM32L1xx/EXT/main.c b/testhal/STM32/STM32L1xx/EXT/main.c deleted file mode 100644 index 1ec4ebb35..000000000 --- a/testhal/STM32/STM32L1xx/EXT/main.c +++ /dev/null @@ -1,98 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void led4off(void *arg) { - - (void)arg; - palClearPad(GPIOB, GPIOB_LED4); -} - -/* Triggered when the button is pressed or released. The LED4 is set to ON.*/ -static void extcb1(EXTDriver *extp, expchannel_t channel) { - static virtual_timer_t vt4; - - (void)extp; - (void)channel; - palSetPad(GPIOB, GPIOB_LED4); - chSysLockFromISR(); - chVTResetI(&vt4); - /* LED4 set to OFF after 200mS.*/ - chVTDoSetI(&vt4, MS2ST(200), led4off, NULL); - chSysUnlockFromISR(); -} - -static const EXTConfig extcfg = { - { - {EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOA, extcb1}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL} - } -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the EXT driver 1. - */ - extStart(&EXTD1, &extcfg); - - /* - * Normal main() thread activity, in this demo it enables and disables the - * button EXT channel using 5 seconds intervals. - */ - while (true) { - chThdSleepMilliseconds(5000); - extChannelDisable(&EXTD1, 0); - chThdSleepMilliseconds(5000); - extChannelEnable(&EXTD1, 0); - } -} diff --git a/testhal/STM32/STM32L1xx/EXT/mcuconf.h b/testhal/STM32/STM32L1xx/EXT/mcuconf.h deleted file mode 100644 index 2c5c3eec3..000000000 --- a/testhal/STM32/STM32L1xx/EXT/mcuconf.h +++ /dev/null @@ -1,206 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32L1xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32L1xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED TRUE -#define STM32_ADC_CLOCK_ENABLED TRUE -#define STM32_USB_CLOCK_ENABLED TRUE -#define STM32_MSIRANGE STM32_MSIRANGE_2M -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSI -#define STM32_PLLMUL_VALUE 6 -#define STM32_PLLDIV_VALUE 3 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV1 -#define STM32_PPRE2 STM32_PPRE2_DIV1 -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_MCOPRE STM32_MCOPRE_DIV1 -#define STM32_RTCSEL STM32_RTCSEL_LSE -#define STM32_RTCPRE STM32_RTCPRE_DIV2 -#define STM32_VOS STM32_VOS_1P8 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 - -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 FALSE -#define STM32_DAC_USE_DAC1_CH2 FALSE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_22_IRQ_PRIORITY 6 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_USB1 FALSE -#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE -#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 -#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ diff --git a/testhal/STM32/STM32L1xx/EXT/readme.txt b/testhal/STM32/STM32L1xx/EXT/readme.txt deleted file mode 100644 index 432ddbd7f..000000000 --- a/testhal/STM32/STM32L1xx/EXT/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/HAL - EXT driver demo for STM32L1xx. ** -***************************************************************************** - -** TARGET ** - -The demo will on an STMicroelectronics STM32L-Discovery board. - -** The Demo ** - -The application demonstrates the use of the STM32L1xx EXT driver. - -** Board Setup ** - -None required. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32/STM32L4xx/EXT/.cproject b/testhal/STM32/STM32L4xx/EXT/.cproject deleted file mode 100644 index 6e960803f..000000000 --- a/testhal/STM32/STM32L4xx/EXT/.cproject +++ /dev/null @@ -1,50 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32/STM32L4xx/EXT/.project b/testhal/STM32/STM32L4xx/EXT/.project deleted file mode 100644 index 1bb057618..000000000 --- a/testhal/STM32/STM32L4xx/EXT/.project +++ /dev/null @@ -1,90 +0,0 @@ - - - STM32L4xx-EXT - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - - - - board - 2 - CHIBIOS/os/hal/boards/ST_NUCLEO64_L476RG - - - os - 2 - CHIBIOS/os - - - diff --git a/testhal/STM32/STM32L4xx/EXT/Makefile b/testhal/STM32/STM32L4xx/EXT/Makefile deleted file mode 100644 index 15c3ccb9c..000000000 --- a/testhal/STM32/STM32L4xx/EXT/Makefile +++ /dev/null @@ -1,220 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../.. -# Startup files. -include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32l4xx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS)/os/hal/ports/STM32/STM32L4xx/platform.mk -include $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_L476RG/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -#include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/STM32L476xG.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/testhal/STM32/STM32L4xx/EXT/chconf.h b/testhal/STM32/STM32L4xx/EXT/chconf.h deleted file mode 100644 index 0c2c44ee3..000000000 --- a/testhal/STM32/STM32L4xx/EXT/chconf.h +++ /dev/null @@ -1,580 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_5_0_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 2 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_OBJ_FIFOS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#define CH_CFG_USE_FACTORY TRUE - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 - -/** - * @brief Enables the registry of generic objects. - */ -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE - -/** - * @brief Enables factory for generic buffers. - */ -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE - -/** - * @brief Enables factory for semaphores. - */ -#define CH_CFG_FACTORY_SEMAPHORES TRUE - -/** - * @brief Enables factory for mailboxes. - */ -#define CH_CFG_FACTORY_MAILBOXES TRUE - -/** - * @brief Enables factory for objects FIFOs. - */ -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/testhal/STM32/STM32L4xx/EXT/debug/STM32L4xx-EXT (OpenOCD, Flash and Run).launch b/testhal/STM32/STM32L4xx/EXT/debug/STM32L4xx-EXT (OpenOCD, Flash and Run).launch deleted file mode 100644 index bc66c15ee..000000000 --- a/testhal/STM32/STM32L4xx/EXT/debug/STM32L4xx-EXT (OpenOCD, Flash and Run).launch +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/testhal/STM32/STM32L4xx/EXT/halconf.h b/testhal/STM32/STM32L4xx/EXT/halconf.h deleted file mode 100644 index 9095470fd..000000000 --- a/testhal/STM32/STM32L4xx/EXT/halconf.h +++ /dev/null @@ -1,417 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT TRUE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the QSPI subsystem. - */ -#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) -#define HAL_USE_QSPI FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/testhal/STM32/STM32L4xx/EXT/main.c b/testhal/STM32/STM32L4xx/EXT/main.c deleted file mode 100644 index 943101205..000000000 --- a/testhal/STM32/STM32L4xx/EXT/main.c +++ /dev/null @@ -1,118 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -static void led5off(void *arg) { - - (void)arg; - palClearPad(GPIOA, GPIOA_LED_GREEN); -} - -/* Triggered when the button is pressed or released. The LED5 is set to ON.*/ -static void extcb1(EXTDriver *extp, expchannel_t channel) { - static virtual_timer_t vt4; - - (void)extp; - (void)channel; - - palSetPad(GPIOA, GPIOA_LED_GREEN); - chSysLockFromISR(); - - /* Timer reset, if still active.*/ - chVTResetI(&vt4); - - /* LED4 set to OFF after 200mS.*/ - chVTSetI(&vt4, MS2ST(200), led5off, NULL); - chSysUnlockFromISR(); -} - -static const EXTConfig extcfg = { - { - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART | EXT_MODE_GPIOC, extcb1}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL}, - {EXT_CH_MODE_DISABLED, NULL} - } -}; - -/* - * Application entry point. - */ -int main(void) { - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* - * Activates the EXT driver 1. - */ - extStart(&EXTD1, &extcfg); - - /* - * Normal main() thread activity, in this demo it enables and disables the - * button EXT channel using 5 seconds intervals. - */ - while (true) { - chThdSleepMilliseconds(5000); - extChannelDisable(&EXTD1, 13); - chThdSleepMilliseconds(5000); - extChannelEnable(&EXTD1, 13); - } -} diff --git a/testhal/STM32/STM32L4xx/EXT/mcuconf.h b/testhal/STM32/STM32L4xx/EXT/mcuconf.h deleted file mode 100644 index d8773b13c..000000000 --- a/testhal/STM32/STM32L4xx/EXT/mcuconf.h +++ /dev/null @@ -1,336 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32L1xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32L4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_VOS STM32_VOS_RANGE1 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_HSI16_ENABLED FALSE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED FALSE -#define STM32_LSE_ENABLED TRUE -#define STM32_MSIPLL_ENABLED TRUE -#define STM32_ADC_CLOCK_ENABLED TRUE -#define STM32_USB_CLOCK_ENABLED TRUE -#define STM32_SAI1_CLOCK_ENABLED TRUE -#define STM32_SAI2_CLOCK_ENABLED TRUE -#define STM32_MSIRANGE STM32_MSIRANGE_4M -#define STM32_MSISRANGE STM32_MSISRANGE_4M -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_MSI -#define STM32_PLLM_VALUE 1 -#define STM32_PLLN_VALUE 80 -#define STM32_PLLP_VALUE 7 -#define STM32_PLLQ_VALUE 6 -#define STM32_PLLR_VALUE 4 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV1 -#define STM32_PPRE2 STM32_PPRE2_DIV1 -#define STM32_STOPWUCK STM32_STOPWUCK_MSI -#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK -#define STM32_MCOPRE STM32_MCOPRE_DIV1 -#define STM32_LSCOSEL STM32_LSCOSEL_NOCLOCK -#define STM32_PLLSAI1N_VALUE 72 -#define STM32_PLLSAI1P_VALUE 7 -#define STM32_PLLSAI1Q_VALUE 6 -#define STM32_PLLSAI1R_VALUE 6 -#define STM32_PLLSAI2N_VALUE 72 -#define STM32_PLLSAI2P_VALUE 7 -#define STM32_PLLSAI2R_VALUE 6 -#define STM32_USART1SEL STM32_USART1SEL_SYSCLK -#define STM32_USART2SEL STM32_USART2SEL_SYSCLK -#define STM32_USART3SEL STM32_USART3SEL_SYSCLK -#define STM32_UART4SEL STM32_UART4SEL_SYSCLK -#define STM32_UART5SEL STM32_UART5SEL_SYSCLK -#define STM32_LPUART1SEL STM32_LPUART1SEL_SYSCLK -#define STM32_I2C1SEL STM32_I2C1SEL_SYSCLK -#define STM32_I2C2SEL STM32_I2C2SEL_SYSCLK -#define STM32_I2C3SEL STM32_I2C3SEL_SYSCLK -#define STM32_LPTIM1SEL STM32_LPTIM1SEL_PCLK1 -#define STM32_LPTIM2SEL STM32_LPTIM2SEL_PCLK1 -#define STM32_SAI1SEL STM32_SAI1SEL_OFF -#define STM32_SAI2SEL STM32_SAI2SEL_OFF -#define STM32_CLK48SEL STM32_CLK48SEL_PLLSAI1 -#define STM32_ADCSEL STM32_ADCSEL_SYSCLK -#define STM32_SWPMI1SEL STM32_SWPMI1SEL_PCLK1 -#define STM32_DFSDMSEL STM32_DFSDMSEL_PCLK1 -#define STM32_RTCSEL STM32_RTCSEL_LSI - -/* - * ADC driver system settings. - */ -#define STM32_ADC_DUAL_MODE FALSE -#define STM32_ADC_COMPACT_SAMPLES FALSE -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_ADC12_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_IRQ_PRIORITY 5 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 -#define STM32_ADC_ADC123_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 - -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 FALSE -#define STM32_DAC_USE_DAC1_CH2 FALSE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1635_38_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2122_IRQ_PRIORITY 15 - - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM15 FALSE -#define STM32_GPT_USE_TIM16 FALSE -#define STM32_GPT_USE_TIM17 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM15_IRQ_PRIORITY 7 -#define STM32_GPT_TIM16_IRQ_PRIORITY 7 -#define STM32_GPT_TIM17_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 - -/* - * QSPI driver system settings. - */ -#define STM32_QSPI_USE_QUADSPI1 FALSE -#define STM32_QSPI_QUADSPI1_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) - -/* - * SDC driver system settings. - */ -#define STM32_SDC_USE_SDMMC1 FALSE -#define STM32_SDC_SDMMC_UNALIGNED_SUPPORT TRUE -#define STM32_SDC_SDMMC_WRITE_TIMEOUT 1000 -#define STM32_SDC_SDMMC_READ_TIMEOUT 1000 -#define STM32_SDC_SDMMC_CLOCK_DELAY 10 -#define STM32_SDC_SDMMC1_DMA_PRIORITY 3 -#define STM32_SDC_SDMMC1_IRQ_PRIORITY 9 -#define STM32_SDC_SDMMC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 TRUE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_LPUART1 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_LPUART1_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 TRUE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_UART4 FALSE -#define STM32_UART_USE_UART5 FALSE -#define STM32_UART_USE_LPUART1 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 6) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_UART_LPUART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_LPUART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 6) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_UART4_DMA_PRIORITY 0 -#define STM32_UART_UART5_DMA_PRIORITY 0 -#define STM32_UART_LPUART1_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -#endif /* MCUCONF_H */ diff --git a/testhal/STM32/STM32L4xx/EXT/readme.txt b/testhal/STM32/STM32L4xx/EXT/readme.txt deleted file mode 100644 index 91eb4b30d..000000000 --- a/testhal/STM32/STM32L4xx/EXT/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/HAL - EXT driver demo for STM32L4xx. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an STM32 Nucleo64-L476RG board. - -** The Demo ** - -The application demonstrates the use of the STM32L4xx EXT driver. - -** Board Setup ** - -None required. - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com diff --git a/testhal/STM32/multi/PAL/Makefile-stm32f051_discovery b/testhal/STM32/multi/PAL/Makefile-stm32f051_discovery index 03f5e40ba..d431ed82e 100644 --- a/testhal/STM32/multi/PAL/Makefile-stm32f051_discovery +++ b/testhal/STM32/multi/PAL/Makefile-stm32f051_discovery @@ -103,8 +103,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F051x8.ld diff --git a/testhal/STM32/multi/PAL/Makefile-stm32f103_olimex b/testhal/STM32/multi/PAL/Makefile-stm32f103_olimex index 055e48c3a..abf9b2a68 100755 --- a/testhal/STM32/multi/PAL/Makefile-stm32f103_olimex +++ b/testhal/STM32/multi/PAL/Makefile-stm32f103_olimex @@ -102,8 +102,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F103xB.ld diff --git a/testhal/STM32/multi/PAL/Makefile-stm32f303_discovery b/testhal/STM32/multi/PAL/Makefile-stm32f303_discovery index bb34d3621..345df1762 100644 --- a/testhal/STM32/multi/PAL/Makefile-stm32f303_discovery +++ b/testhal/STM32/multi/PAL/Makefile-stm32f303_discovery @@ -103,8 +103,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F303xC.ld diff --git a/testhal/STM32/multi/PAL/Makefile-stm32f373_eval b/testhal/STM32/multi/PAL/Makefile-stm32f373_eval index aad163830..73f4d216e 100755 --- a/testhal/STM32/multi/PAL/Makefile-stm32f373_eval +++ b/testhal/STM32/multi/PAL/Makefile-stm32f373_eval @@ -103,8 +103,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F373xC.ld diff --git a/testhal/STM32/multi/PAL/Makefile-stm32f407_discovery b/testhal/STM32/multi/PAL/Makefile-stm32f407_discovery index 0118e1b25..1956d72b1 100644 --- a/testhal/STM32/multi/PAL/Makefile-stm32f407_discovery +++ b/testhal/STM32/multi/PAL/Makefile-stm32f407_discovery @@ -103,8 +103,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F407xG.ld diff --git a/testhal/STM32/multi/PAL/Makefile-stm32f429_discovery b/testhal/STM32/multi/PAL/Makefile-stm32f429_discovery index 1441f8edf..6a1cb499c 100755 --- a/testhal/STM32/multi/PAL/Makefile-stm32f429_discovery +++ b/testhal/STM32/multi/PAL/Makefile-stm32f429_discovery @@ -108,8 +108,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F429xI.ld diff --git a/testhal/STM32/multi/PAL/Makefile-stm32f746_discovery b/testhal/STM32/multi/PAL/Makefile-stm32f746_discovery index ea233ce68..359f7bb9e 100755 --- a/testhal/STM32/multi/PAL/Makefile-stm32f746_discovery +++ b/testhal/STM32/multi/PAL/Makefile-stm32f746_discovery @@ -108,8 +108,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F746xG.ld diff --git a/testhal/STM32/multi/PAL/Makefile-stm32l053_discovery b/testhal/STM32/multi/PAL/Makefile-stm32l053_discovery index ae30f2ad6..770e59f79 100644 --- a/testhal/STM32/multi/PAL/Makefile-stm32l053_discovery +++ b/testhal/STM32/multi/PAL/Makefile-stm32l053_discovery @@ -103,8 +103,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32L053x8.ld diff --git a/testhal/STM32/multi/PAL/Makefile-stm32l151_discovery b/testhal/STM32/multi/PAL/Makefile-stm32l151_discovery index 99ebec116..fe5334dde 100755 --- a/testhal/STM32/multi/PAL/Makefile-stm32l151_discovery +++ b/testhal/STM32/multi/PAL/Makefile-stm32l151_discovery @@ -103,8 +103,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32L152xB.ld diff --git a/testhal/STM32/multi/PAL/Makefile-stm32l476_discovery b/testhal/STM32/multi/PAL/Makefile-stm32l476_discovery index 9d9e42477..fd6d661ec 100644 --- a/testhal/STM32/multi/PAL/Makefile-stm32l476_discovery +++ b/testhal/STM32/multi/PAL/Makefile-stm32l476_discovery @@ -103,8 +103,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32L476xG.ld diff --git a/testhal/STM32/multi/SPI/Makefile-stm32f091_nucleo64 b/testhal/STM32/multi/SPI/Makefile-stm32f091_nucleo64 index 165953e27..a6c78f04e 100644 --- a/testhal/STM32/multi/SPI/Makefile-stm32f091_nucleo64 +++ b/testhal/STM32/multi/SPI/Makefile-stm32f091_nucleo64 @@ -102,9 +102,9 @@ include $(CHIBIOS)/os/hal/osal/rt/osal.mk include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk # Other files (optional). -# include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/lib/test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F091xC.ld diff --git a/testhal/STM32/multi/SPI/Makefile-stm32f303_discovery b/testhal/STM32/multi/SPI/Makefile-stm32f303_discovery index bb34d3621..345df1762 100644 --- a/testhal/STM32/multi/SPI/Makefile-stm32f303_discovery +++ b/testhal/STM32/multi/SPI/Makefile-stm32f303_discovery @@ -103,8 +103,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F303xC.ld diff --git a/testhal/STM32/multi/SPI/Makefile-stm32f407_discovery b/testhal/STM32/multi/SPI/Makefile-stm32f407_discovery index 0118e1b25..1956d72b1 100644 --- a/testhal/STM32/multi/SPI/Makefile-stm32f407_discovery +++ b/testhal/STM32/multi/SPI/Makefile-stm32f407_discovery @@ -103,8 +103,8 @@ include $(CHIBIOS)/os/rt/rt.mk include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk # Other files (optional). #include $(CHIBIOS)/test/lib/test.mk -include $(CHIBIOS)/test/rt/rt_test.mk -include $(CHIBIOS)/test/oslib/oslib_test.mk +#include $(CHIBIOS)/test/rt/rt_test.mk +#include $(CHIBIOS)/test/oslib/oslib_test.mk # Define linker script file here LDSCRIPT= $(STARTUPLD)/STM32F407xG.ld diff --git a/testhal/common/irq_storm.c b/testhal/common/irq_storm.c index c21a2bf00..f8f9b93e3 100644 --- a/testhal/common/irq_storm.c +++ b/testhal/common/irq_storm.c @@ -95,7 +95,7 @@ static THD_FUNCTION(irq_storm_thread, arg) { while (chThdShouldTerminateX() == false) { /* Waiting for a message.*/ - chMBFetch(&mb[me], &msg, TIME_INFINITE); + chMBFetchTimeout(&mb[me], &msg, TIME_INFINITE); #if IRQ_STORM_CFG_RANDOMIZE != FALSE /* Pseudo-random delay.*/ @@ -124,7 +124,7 @@ static THD_FUNCTION(irq_storm_thread, arg) { if (target < IRQ_STORM_CFG_NUM_THREADS) { /* If this thread is not at the end of a chain re-sending the message, note this check works because the variable target is unsigned.*/ - msg = chMBPost(&mb[target], msg, TIME_IMMEDIATE); + msg = chMBPostTimeout(&mb[target], msg, TIME_IMMEDIATE); if (msg != MSG_OK) saturated = TRUE; } -- cgit v1.2.3