From 53b6f6d8df525c3f71d230c6ed2be39c64c871a5 Mon Sep 17 00:00:00 2001 From: gdisirio Date: Mon, 18 Feb 2008 15:53:48 +0000 Subject: git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@193 35acf78f-673a-0410-8e92-d51de3d6d3f4 --- demos/ARM7-AT91SAM7X-GCC/Makefile | 1 + demos/ARM7-AT91SAM7X-GCC/at91lib/aic.c | 84 ++++++++++++++++++++++++++++++++++ demos/ARM7-AT91SAM7X-GCC/at91lib/aic.h | 78 +++++++++++++++++++++++++++++++ demos/ARM7-AT91SAM7X-GCC/board.c | 82 +++++++++++++++++++++++++-------- demos/ARM7-AT91SAM7X-GCC/board.h | 35 ++++++++++++++ 5 files changed, 262 insertions(+), 18 deletions(-) create mode 100644 demos/ARM7-AT91SAM7X-GCC/at91lib/aic.c create mode 100644 demos/ARM7-AT91SAM7X-GCC/at91lib/aic.h diff --git a/demos/ARM7-AT91SAM7X-GCC/Makefile b/demos/ARM7-AT91SAM7X-GCC/Makefile index e4fd03fce..a50ecb387 100644 --- a/demos/ARM7-AT91SAM7X-GCC/Makefile +++ b/demos/ARM7-AT91SAM7X-GCC/Makefile @@ -68,6 +68,7 @@ ASRC = ../../ports/ARM7-LPC214x/GCC/chcore.c \ ../../src/chevents.c ../../src/chmsg.c ../../src/chsleep.c ../../src/chqueues.c \ ../../src/chserial.c \ ../../src/lib/evtimer.c ../../test/test.c \ + at91lib\aic.c \ board.c main.c # List THUMB-mode C sources here diff --git a/demos/ARM7-AT91SAM7X-GCC/at91lib/aic.c b/demos/ARM7-AT91SAM7X-GCC/at91lib/aic.c new file mode 100644 index 000000000..66eebf94e --- /dev/null +++ b/demos/ARM7-AT91SAM7X-GCC/at91lib/aic.c @@ -0,0 +1,84 @@ +/* ---------------------------------------------------------------------------- + * ATMEL Microcontroller Software Support - ROUSSET - + * ---------------------------------------------------------------------------- + * Copyright (c) 2006, Atmel Corporation + + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * - Redistributions of source code must retain the above copyright notice, + * this list of conditions and the disclaiimer below. + * + * - Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the disclaimer below in the documentation and/or + * other materials provided with the distribution. + * + * Atmel's name may not be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * ---------------------------------------------------------------------------- + */ + +//------------------------------------------------------------------------------ +// Headers +//------------------------------------------------------------------------------ + +#include "aic.h" +#include + +//------------------------------------------------------------------------------ +// Exported functions +//------------------------------------------------------------------------------ + +//------------------------------------------------------------------------------ +/// Configures the interrupt associated with the given source, using the +/// specified mode and interrupt handler. +/// \param source Interrupt source to configure. +/// \param mode Triggering mode of the interrupt. +/// \param handler Interrupt handler function. +//------------------------------------------------------------------------------ +void AIC_ConfigureIT(unsigned int source, + unsigned int mode, + void (*handler)( void )) +{ + // Disable the interrupt first + AT91C_BASE_AIC->AIC_IDCR = 1 << source; + + // Configure mode and handler + AT91C_BASE_AIC->AIC_SMR[source] = mode; + AT91C_BASE_AIC->AIC_SVR[source] = (unsigned int) handler; + + // Clear interrupt + AT91C_BASE_AIC->AIC_ICCR = 1 << source; +} + +//------------------------------------------------------------------------------ +/// Enables interrupts coming from the given (unique) source. +/// \param source Interrupt source to enable. +//------------------------------------------------------------------------------ +void AIC_EnableIT(unsigned int source) +{ + AT91C_BASE_AIC->AIC_IECR = 1 << source; +} + +//------------------------------------------------------------------------------ +/// Disables interrupts coming from the given (unique) source. +/// \param source Interrupt source to enable. +//------------------------------------------------------------------------------ +void AIC_DisableIT(unsigned int source) +{ + AT91C_BASE_AIC->AIC_IDCR = 1 << source; +} + diff --git a/demos/ARM7-AT91SAM7X-GCC/at91lib/aic.h b/demos/ARM7-AT91SAM7X-GCC/at91lib/aic.h new file mode 100644 index 000000000..e8e52c78a --- /dev/null +++ b/demos/ARM7-AT91SAM7X-GCC/at91lib/aic.h @@ -0,0 +1,78 @@ +/* ---------------------------------------------------------------------------- + * ATMEL Microcontroller Software Support - ROUSSET - + * ---------------------------------------------------------------------------- + * Copyright (c) 2006, Atmel Corporation + + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * - Redistributions of source code must retain the above copyright notice, + * this list of conditions and the disclaiimer below. + * + * - Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the disclaimer below in the documentation and/or + * other materials provided with the distribution. + * + * Atmel's name may not be used to endorse or promote products derived from + * this software without specific prior written permission. + * + * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, + * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * ---------------------------------------------------------------------------- + */ + +//------------------------------------------------------------------------------ +/// \dir +/// !Purpose +/// +/// Methods and definitions for configuring interrupts using the Advanced +/// Interrupt Controller (AIC). +/// +/// !Usage +/// -# Configure an interrupt source using AIC_ConfigureIT +/// -# Enable or disable interrupt generation of a particular source with +/// AIC_EnableIT and AIC_DisableIT. +//------------------------------------------------------------------------------ + +#ifndef AIC_H +#define AIC_H + +//------------------------------------------------------------------------------ +// Headers +//------------------------------------------------------------------------------ + +#include + +//------------------------------------------------------------------------------ +// Definitions +//------------------------------------------------------------------------------ + +#ifndef AT91C_AIC_SRCTYPE_INT_HIGH_LEVEL + /// Redefinition of missing constant. + #define AT91C_AIC_SRCTYPE_INT_HIGH_LEVEL AT91C_AIC_SRCTYPE_INT_LEVEL_SENSITIVE +#endif + +//------------------------------------------------------------------------------ +// Global functions +//------------------------------------------------------------------------------ + +extern void AIC_ConfigureIT(unsigned int source, + unsigned int mode, + void (*handler)( void )); + +extern void AIC_EnableIT(unsigned int source); + +extern void AIC_DisableIT(unsigned int source); + +#endif //#ifndef AIC_H + diff --git a/demos/ARM7-AT91SAM7X-GCC/board.c b/demos/ARM7-AT91SAM7X-GCC/board.c index bc0d46189..fac56f18d 100644 --- a/demos/ARM7-AT91SAM7X-GCC/board.c +++ b/demos/ARM7-AT91SAM7X-GCC/board.c @@ -19,7 +19,8 @@ #include -#include "at91lib/AT91SAM7X256.h" +#include "board.h" +#include "at91lib/aic.h" extern void FiqHandler(void); @@ -29,10 +30,24 @@ static void SpuriousHandler(void) { AT91C_BASE_AIC->AIC_EOICR = (AT91_REG)AT91C_BASE_AIC; } +/* + * Timer 0 IRQ handling here. + */ +__attribute__((naked)) +static void SYSIrqHandler(void) { + + chSysIRQEnterI(); + + if (AT91C_BASE_PITC->PITC_PISR & AT91C_PITC_PITS) { + chSysTimerHandlerI(); + (void) AT91C_BASE_PITC->PITC_PIVR; + } + + chSysIRQExitI(); +} + void hwinit(void) { int i; - AT91PS_PMC pmcp = AT91C_BASE_PMC; - AT91PS_AIC aicp = AT91C_BASE_AIC; /* * Flash Memory: 1 wait state, about 50 cycles in a microsecond. @@ -47,40 +62,71 @@ void hwinit(void) { /* * Enables the main oscillator and waits 56 slow cycles as startup time. */ - pmcp->PMC_MOR = (AT91C_CKGR_OSCOUNT & (7 << 8)) | AT91C_CKGR_MOSCEN; - while (!(pmcp->PMC_SR & AT91C_PMC_MOSCS)) + AT91C_BASE_PMC->PMC_MOR = (AT91C_CKGR_OSCOUNT & (7 << 8)) | AT91C_CKGR_MOSCEN; + while (!(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MOSCS)) ; /* * PLL setup: DIV = 14, MUL = 72, PLLCOUNT = 10 * PLLfreq = 96109714 Hz (rounded) */ - pmcp->PMC_PLLR = (AT91C_CKGR_DIV & 14) | - (AT91C_CKGR_PLLCOUNT & (10 << 8)) | - (AT91C_CKGR_MUL & (72 << 16)); - while (!(pmcp->PMC_SR & (AT91C_PMC_LOCK))) + AT91C_BASE_PMC->PMC_PLLR = (AT91C_CKGR_DIV & 14) | + (AT91C_CKGR_PLLCOUNT & (10 << 8)) | + (AT91C_CKGR_MUL & (72 << 16)); + while (!(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_LOCK)) ; /* * Master clock = PLLfreq / 2 = 48054858 Hz (rounded) */ - pmcp->PMC_MCKR = AT91C_PMC_CSS_PLL_CLK | AT91C_PMC_PRES_CLK_2; - while (!(pmcp->PMC_SR & (AT91C_PMC_MCKRDY))) + AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_CSS_PLL_CLK | AT91C_PMC_PRES_CLK_2; + while (!(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY)) ; + /* + * I/O setup, enable clocks, initially all pins are inputs with pullups. + */ + AT91C_BASE_PMC->PMC_PCER = (1 << AT91C_ID_PIOA) | (1 << AT91C_ID_PIOB); + AT91C_BASE_PIOA->PIO_PER = 0xFFFFFFFF; + AT91C_BASE_PIOB->PIO_PER = 0xFFFFFFFF; + /* * Default AIC setup, the device drivers will modify it as needed. */ - aicp->AIC_SVR[0] = (AT91_REG)FiqHandler; + AT91C_BASE_AIC->AIC_ICCR = 0xFFFFFFFF; + AT91C_BASE_AIC->AIC_SVR[0] = (AT91_REG)FiqHandler; for (i = 1; i < 31; i++) { - aicp->AIC_SVR[i] = (AT91_REG)NULL; - aicp->AIC_EOICR = (AT91_REG)i; + AT91C_BASE_AIC->AIC_SVR[i] = (AT91_REG)NULL; + AT91C_BASE_AIC->AIC_EOICR = (AT91_REG)i; } - aicp->AIC_SPU = (AT91_REG)SpuriousHandler; + AT91C_BASE_AIC->AIC_SPU = (AT91_REG)SpuriousHandler; /* - * I/O setup, enable clocks, initially all pins are inputs with pullups. + * LCD pins setup. */ - pmcp->PMC_PCER = (1 << AT91C_ID_PIOA) | (1 << AT91C_ID_PIOB); - AT91C_BASE_PIOA->PIO_PER = 0xFFFFFFFF; + AT91C_BASE_PIOB->PIO_SODR = PIOB_LCD_BL; // Set to high. + AT91C_BASE_PIOB->PIO_OER = PIOB_LCD_BL; // Configure as output. + AT91C_BASE_SYS->PIOA_PPUDR = PIOB_LCD_BL; // Disable internal pullup resistor. + + AT91C_BASE_PIOA->PIO_SODR = PIOA_LCD_RESET; // Set to high. + AT91C_BASE_PIOA->PIO_OER = PIOA_LCD_RESET; // Configure as output. + AT91C_BASE_SYS->PIOB_PPUDR = PIOA_LCD_RESET; // Disable internal pullup resistor. + + /* + * Joystick and buttons, disable pullups, already inputs. + */ + AT91C_BASE_SYS->PIOA_PPUDR = PIOA_B1 | PIOA_B2 | PIOA_B3 | PIOA_B4 | PIOA_B5; + AT91C_BASE_SYS->PIOB_PPUDR = PIOB_SW1 | PIOB_SW2; + + /* + * MMC/SD slot, disable pullups, already inputs. + */ + AT91C_BASE_SYS->PIOB_PPUDR = PIOB_MMC_WP | PIOB_MMC_CP; + + /* + * PIT Initialization. + */ + AIC_ConfigureIT(AT91C_ID_SYS, AT91C_AIC_SRCTYPE_POSITIVE_EDGE, SYSIrqHandler); + AT91C_BASE_PITC->PITC_PIMR = (MCK / 16 / CH_FREQUENCY) - 1; + AT91C_BASE_PITC->PITC_PIMR |= AT91C_PITC_PITEN | AT91C_PITC_PITIEN; } diff --git a/demos/ARM7-AT91SAM7X-GCC/board.h b/demos/ARM7-AT91SAM7X-GCC/board.h index e6b529df6..c1a900890 100644 --- a/demos/ARM7-AT91SAM7X-GCC/board.h +++ b/demos/ARM7-AT91SAM7X-GCC/board.h @@ -20,7 +20,42 @@ #ifndef _BOARD_H_ #define _BOARD_H_ +#ifndef AT91SAM7X256_H +#include "at91lib/AT91SAM7X256.h" +#endif + #define BOARD_OLIMEX_SAM7_EX256 +#define MCK 18432000 + +/* + * I/O definitions. + */ +#define PIOA_LCD_RESET (1 << 2) +#define PIOA_B1 (1 << 7) +#define PIOA_B2 (1 << 8) +#define PIOA_B3 (1 << 9) +#define PIOA_B4 (1 << 14) +#define PIOA_B5 (1 << 15) +#define PIOA_USB_PUP (1 << 25) +#define PIOA_USB_PR (1 << 26) +#define PIOA_PA27 (1 << 27) +#define PIOA_PA28 (1 << 28) +#define PIOA_PA29 (1 << 29) +#define PIOA_PA30 (1 << 30) + +#define PIOB_PHY_PD (1 << 18) +#define PIOB_AUDIO_OUT (1 << 19) +#define PIOB_LCD_BL (1 << 20) +#define PIOB_PB21 (1 << 21) +#define PIOB_MMC_WP (1 << 22) +#define PIOB_MMC_CP (1 << 23) +#define PIOB_SW1 (1 << 24) +#define PIOB_SW2 (1 << 25) +#define PIOB_PHY_IRQ (1 << 26) +#define PIOB_PB27_AD0 (1 << 27) +#define PIOB_PB27_AD1 (1 << 28) +#define PIOB_PB27_AD2 (1 << 29) +#define PIOB_PB27_AD3 (1 << 30) #endif /* _BOARD_H_ */ -- cgit v1.2.3