diff options
Diffstat (limited to 'testhal/STM32F1xx/RTC_FATTIME/main.c')
| -rw-r--r-- | testhal/STM32F1xx/RTC_FATTIME/main.c | 570 |
1 files changed, 0 insertions, 570 deletions
diff --git a/testhal/STM32F1xx/RTC_FATTIME/main.c b/testhal/STM32F1xx/RTC_FATTIME/main.c deleted file mode 100644 index c229830d0..000000000 --- a/testhal/STM32F1xx/RTC_FATTIME/main.c +++ /dev/null @@ -1,570 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include <stdio.h>
-#include <string.h>
-#include <time.h>
-
-#include "ch.h"
-#include "hal.h"
-
-#include "usb_cdc.h"
-#include "shell.h"
-#include "chprintf.h"
-#include "chrtclib.h"
-#include "ff.h"
-
-/*===========================================================================*/
-/* USB related stuff. */
-/*===========================================================================*/
-
-/*
- * Endpoints to be used for USBD1.
- */
-#define USBD1_DATA_REQUEST_EP 1
-#define USBD1_DATA_AVAILABLE_EP 1
-#define USBD1_INTERRUPT_REQUEST_EP 2
-
-/*
- * Serial over USB Driver structure.
- */
-static SerialUSBDriver SDU1;
-
-/*
- * USB Device Descriptor.
- */
-static const uint8_t vcom_device_descriptor_data[18] = {
- USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */
- 0x02, /* bDeviceClass (CDC). */
- 0x00, /* bDeviceSubClass. */
- 0x00, /* bDeviceProtocol. */
- 0x40, /* bMaxPacketSize. */
- 0x0483, /* idVendor (ST). */
- 0x5740, /* idProduct. */
- 0x0200, /* bcdDevice. */
- 1, /* iManufacturer. */
- 2, /* iProduct. */
- 3, /* iSerialNumber. */
- 1) /* bNumConfigurations. */
-};
-
-/*
- * Device Descriptor wrapper.
- */
-static const USBDescriptor vcom_device_descriptor = {
- sizeof vcom_device_descriptor_data,
- vcom_device_descriptor_data
-};
-
-/* Configuration Descriptor tree for a CDC.*/
-static const uint8_t vcom_configuration_descriptor_data[67] = {
- /* Configuration Descriptor.*/
- USB_DESC_CONFIGURATION(67, /* wTotalLength. */
- 0x02, /* bNumInterfaces. */
- 0x01, /* bConfigurationValue. */
- 0, /* iConfiguration. */
- 0xC0, /* bmAttributes (self powered). */
- 50), /* bMaxPower (100mA). */
- /* Interface Descriptor.*/
- USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */
- 0x00, /* bAlternateSetting. */
- 0x01, /* bNumEndpoints. */
- 0x02, /* bInterfaceClass (Communications
- Interface Class, CDC section
- 4.2). */
- 0x02, /* bInterfaceSubClass (Abstract
- Control Model, CDC section 4.3). */
- 0x01, /* bInterfaceProtocol (AT commands,
- CDC section 4.4). */
- 0), /* iInterface. */
- /* Header Functional Descriptor (CDC section 5.2.3).*/
- USB_DESC_BYTE (5), /* bLength. */
- USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */
- USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header
- Functional Descriptor. */
- USB_DESC_BCD (0x0110), /* bcdCDC. */
- /* Call Management Functional Descriptor. */
- USB_DESC_BYTE (5), /* bFunctionLength. */
- USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */
- USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management
- Functional Descriptor). */
- USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */
- USB_DESC_BYTE (0x01), /* bDataInterface. */
- /* ACM Functional Descriptor.*/
- USB_DESC_BYTE (4), /* bFunctionLength. */
- USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */
- USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract
- Control Management Descriptor). */
- USB_DESC_BYTE (0x02), /* bmCapabilities. */
- /* Union Functional Descriptor.*/
- USB_DESC_BYTE (5), /* bFunctionLength. */
- USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */
- USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union
- Functional Descriptor). */
- USB_DESC_BYTE (0x00), /* bMasterInterface (Communication
- Class Interface). */
- USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class
- Interface). */
- /* Endpoint 2 Descriptor.*/
- USB_DESC_ENDPOINT (USB_CDC_INTERRUPT_REQUEST_EP|0x80,
- 0x03, /* bmAttributes (Interrupt). */
- 0x0008, /* wMaxPacketSize. */
- 0xFF), /* bInterval. */
- /* Interface Descriptor.*/
- USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */
- 0x00, /* bAlternateSetting. */
- 0x02, /* bNumEndpoints. */
- 0x0A, /* bInterfaceClass (Data Class
- Interface, CDC section 4.5). */
- 0x00, /* bInterfaceSubClass (CDC section
- 4.6). */
- 0x00, /* bInterfaceProtocol (CDC section
- 4.7). */
- 0x00), /* iInterface. */
- /* Endpoint 3 Descriptor.*/
- USB_DESC_ENDPOINT (USB_CDC_DATA_AVAILABLE_EP, /* bEndpointAddress.*/
- 0x02, /* bmAttributes (Bulk). */
- 0x0040, /* wMaxPacketSize. */
- 0x00), /* bInterval. */
- /* Endpoint 1 Descriptor.*/
- USB_DESC_ENDPOINT (USB_CDC_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/
- 0x02, /* bmAttributes (Bulk). */
- 0x0040, /* wMaxPacketSize. */
- 0x00) /* bInterval. */
-};
-
-/*
- * Configuration Descriptor wrapper.
- */
-static const USBDescriptor vcom_configuration_descriptor = {
- sizeof vcom_configuration_descriptor_data,
- vcom_configuration_descriptor_data
-};
-
-/*
- * U.S. English language identifier.
- */
-static const uint8_t vcom_string0[] = {
- USB_DESC_BYTE(4), /* bLength. */
- USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */
- USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */
-};
-
-/*
- * Vendor string.
- */
-static const uint8_t vcom_string1[] = {
- USB_DESC_BYTE(38), /* bLength. */
- USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */
- 'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0,
- 'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0,
- 'c', 0, 's', 0
-};
-
-/*
- * Device Description string.
- */
-static const uint8_t vcom_string2[] = {
- USB_DESC_BYTE(56), /* bLength. */
- USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */
- 'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0,
- 'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0,
- 'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0,
- 'o', 0, 'r', 0, 't', 0
-};
-
-/*
- * Serial Number string.
- */
-static const uint8_t vcom_string3[] = {
- USB_DESC_BYTE(8), /* bLength. */
- USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */
- '0' + CH_KERNEL_MAJOR, 0,
- '0' + CH_KERNEL_MINOR, 0,
- '0' + CH_KERNEL_PATCH, 0
-};
-
-/*
- * Strings wrappers array.
- */
-static const USBDescriptor vcom_strings[] = {
- {sizeof vcom_string0, vcom_string0},
- {sizeof vcom_string1, vcom_string1},
- {sizeof vcom_string2, vcom_string2},
- {sizeof vcom_string3, vcom_string3}
-};
-
-/*
- * Handles the GET_DESCRIPTOR callback. All required descriptors must be
- * handled here.
- */
-static const USBDescriptor *get_descriptor(USBDriver *usbp,
- uint8_t dtype,
- uint8_t dindex,
- uint16_t lang) {
-
- (void)usbp;
- (void)lang;
- switch (dtype) {
- case USB_DESCRIPTOR_DEVICE:
- return &vcom_device_descriptor;
- case USB_DESCRIPTOR_CONFIGURATION:
- return &vcom_configuration_descriptor;
- case USB_DESCRIPTOR_STRING:
- if (dindex < 4)
- return &vcom_strings[dindex];
- }
- return NULL;
-}
-
-/**
- * @brief IN EP1 state.
- */
-static USBInEndpointState ep1instate;
-
-/**
- * @brief OUT EP1 state.
- */
-static USBOutEndpointState ep1outstate;
-
-/**
- * @brief EP1 initialization structure (both IN and OUT).
- */
-static const USBEndpointConfig ep1config = {
- USB_EP_MODE_TYPE_BULK,
- NULL,
- sduDataTransmitted,
- sduDataReceived,
- 0x0040,
- 0x0040,
- &ep1instate,
- &ep1outstate,
- 1,
- NULL
-};
-
-/**
- * @brief IN EP2 state.
- */
-static USBInEndpointState ep2instate;
-
-/**
- * @brief EP2 initialization structure (IN only).
- */
-static const USBEndpointConfig ep2config = {
- USB_EP_MODE_TYPE_INTR,
- NULL,
- sduInterruptTransmitted,
- NULL,
- 0x0010,
- 0x0000,
- &ep2instate,
- NULL,
- 1,
- NULL
-};
-
-/*
- * Handles the USB driver global events.
- */
-static void usb_event(USBDriver *usbp, usbevent_t event) {
-
- switch (event) {
- case USB_EVENT_RESET:
- return;
- case USB_EVENT_ADDRESS:
- return;
- case USB_EVENT_CONFIGURED:
- chSysLockFromIsr();
-
- /* Enables the endpoints specified into the configuration.
- Note, this callback is invoked from an ISR so I-Class functions
- must be used.*/
- usbInitEndpointI(usbp, USB_CDC_DATA_REQUEST_EP, &ep1config);
- usbInitEndpointI(usbp, USB_CDC_INTERRUPT_REQUEST_EP, &ep2config);
-
- /* Resetting the state of the CDC subsystem.*/
- sduConfigureHookI(&SDU1);
-
- chSysUnlockFromIsr();
- return;
- case USB_EVENT_SUSPEND:
- return;
- case USB_EVENT_WAKEUP:
- return;
- case USB_EVENT_STALLED:
- return;
- }
- return;
-}
-
-/*
- * USB driver configuration.
- */
-static const USBConfig usbcfg = {
- usb_event,
- get_descriptor,
- sduRequestsHook,
- NULL
-};
-
-/*
- * Serial over USB driver configuration.
- */
-static const SerialUSBConfig serusbcfg = {
- &USBD1,
- USBD1_DATA_REQUEST_EP,
- USBD1_DATA_AVAILABLE_EP,
- USBD1_INTERRUPT_REQUEST_EP
-};
-
-/**
- * @brief FS object.
- */
-FATFS MMC_FS;
-
-/**
- * MMC driver instance.
- */
-MMCDriver MMCD1;
-
-/* FS mounted and ready.*/
-static bool_t fs_ready = FALSE;
-
-/* Maximum speed SPI configuration (18MHz, CPHA=0, CPOL=0, MSb first).*/
-static SPIConfig hs_spicfg = {NULL, IOPORT2, GPIOB_SPI2NSS, 0};
-
-/* Low speed SPI configuration (281.250kHz, CPHA=0, CPOL=0, MSb first).*/
-static SPIConfig ls_spicfg = {NULL, IOPORT2, GPIOB_SPI2NSS,
- SPI_CR1_BR_2 | SPI_CR1_BR_1};
-
-/* MMC/SD over SPI driver configuration.*/
-static MMCConfig mmccfg = {&SPID2, &ls_spicfg, &hs_spicfg};
-
-/**
- *
- */
-bool_t mmc_lld_is_write_protected(MMCDriver *sdcp) {
- (void)sdcp;
- return FALSE;
-}
-
-/**
- *
- */
-bool_t mmc_lld_is_card_inserted(MMCDriver *sdcp) {
- (void)sdcp;
- return !palReadPad(GPIOC, GPIOC_MMCCP);
-}
-
-/**
- *
- */
-void cmd_sdiotest(BaseSequentialStream *chp, int argc, char *argv[]){
- (void)argc;
- (void)argv;
- FRESULT err;
- uint32_t clusters;
- FATFS *fsp;
- FIL FileObject;
- //FILINFO FileInfo;
- size_t bytes_written;
- struct tm timp;
-
- // set time to 2011-03-13 07:06:40
- //rtcSetTimeUnixSec(&RTCD1, 1300000000);
-
-#if !HAL_USE_RTC
- chprintf(chp, "ERROR! Chibios compiled without RTC support.");
- chprintf(chp, "Enable HAL_USE_RCT in you halconf.h");
- chThdSleepMilliseconds(100);
- return;
-#endif
-
- chprintf(chp, "Trying to connect SDIO... ");
- chThdSleepMilliseconds(100);
-
- if (!mmcConnect(&MMCD1)) {
- chprintf(chp, "OK\r\n");
- chprintf(chp, "Register working area for filesystem... ");
- chThdSleepMilliseconds(100);
- err = f_mount(0, &MMC_FS);
- if (err != FR_OK){
- chSysHalt();
- }
- else{
- fs_ready = TRUE;
- chprintf(chp, "OK\r\n");
- }
-
- chprintf(chp, "Mounting filesystem... ");
- chThdSleepMilliseconds(100);
- err = f_getfree("/", &clusters, &fsp);
- if (err != FR_OK) {
- chSysHalt();
- }
- chprintf(chp, "OK\r\n");
- chprintf(chp,
- "FS: %lu free clusters, %lu sectors per cluster, %lu bytes free\r\n",
- clusters, (uint32_t)MMC_FS.csize,
- clusters * (uint32_t)MMC_FS.csize * (uint32_t)MMCSD_BLOCK_SIZE);
-
- rtcGetTimeTm(&RTCD1, &timp);
- chprintf(chp, "Current RTC time is: ");
- chprintf(chp, "%u-%u-%u %u:%u:%u\r\n",
- timp.tm_year+1900, timp.tm_mon+1, timp.tm_mday, timp.tm_hour, timp.tm_min,
- timp.tm_sec);
-
- chprintf(chp, "Creating empty file 'tmstmp.tst'... ");
- chThdSleepMilliseconds(100);
- err = f_open(&FileObject, "0:tmstmp.tst", FA_WRITE | FA_OPEN_ALWAYS);
- if (err != FR_OK) {
- chSysHalt();
- }
- chprintf(chp, "OK\r\n");
-
- chprintf(chp, "Write some data in it... ");
- chThdSleepMilliseconds(100);
- err = f_write(&FileObject, "tst", sizeof("tst"), (void *)&bytes_written);
- if (err != FR_OK) {
- chSysHalt();
- }
- else
- chprintf(chp, "OK\r\n");
-
- chprintf(chp, "Closing file 'tmstmp.tst'... ");
- chThdSleepMilliseconds(100);
- err = f_close(&FileObject);
- if (err != FR_OK) {
- chSysHalt();
- }
- else
- chprintf(chp, "OK\r\n");
-
-// chprintf(chp, "Obtaining file info ... ");
-// chThdSleepMilliseconds(100);
-// err = f_stat("0:tmstmp.tst", &FileInfo);
-// if (err != FR_OK) {
-// chSysHalt();
-// }
-// else{
-// chprintf(chp, "OK\r\n");
-// chprintf(chp, " Timestamp: %u-%u-%u %u:%u:%u\r\n",
-// ((FileInfo.fdate >> 9) & 127) + 1980,
-// (FileInfo.fdate >> 5) & 15,
-// FileInfo.fdate & 31,
-// (FileInfo.ftime >> 11) & 31,
-// (FileInfo.ftime >> 5) & 63,
-// (FileInfo.ftime & 31) * 2);
-// }
-
- chprintf(chp, "Umounting filesystem... ");
- f_mount(0, NULL);
- chprintf(chp, "OK\r\n");
-
- chprintf(chp, "Disconnecting from SDIO...");
- chThdSleepMilliseconds(100);
- if (mmcDisconnect(&MMCD1))
- chSysHalt();
- chprintf(chp, " OK\r\n");
- chprintf(chp, "------------------------------------------------------\r\n");
- chprintf(chp, "Now you can remove memory card and check timestamp on PC.\r\n");
- chThdSleepMilliseconds(100);
- }
- else{
- chSysHalt();
- }
-}
-
-/*===========================================================================*/
-/* Command line related. */
-/*===========================================================================*/
-
-#define SHELL_WA_SIZE THD_WA_SIZE(2048)
-
-static const ShellCommand commands[] = {
- {"sdiotest", cmd_sdiotest},
- {NULL, NULL}
-};
-
-static const ShellConfig shell_cfg1 = {
- (BaseSequentialStream *)&SDU1,
- commands
-};
-
-/*===========================================================================*/
-/* Generic code. */
-/*===========================================================================*/
-
-/*
- * Application entry point.
- */
-int main(void) {
- Thread *shelltp = NULL;
-
- /*
- * System initializations.
- * - HAL initialization, this also initializes the configured device drivers
- * and performs the board-specific initializations.
- * - Kernel initialization, the main() function becomes a thread and the
- * RTOS is active.
- */
- halInit();
- chSysInit();
-
- /*
- * Initializes a serial-over-USB CDC driver.
- */
- sduObjectInit(&SDU1);
- sduStart(&SDU1, &serusbcfg);
-
- /*
- * Activates the USB driver and then the USB bus pull-up on D+.
- * Note, a delay is inserted in order to not have to disconnect the cable
- * after a reset.
- */
- usbDisconnectBus(serusbcfg.usbp);
- chThdSleepMilliseconds(1000);
- usbStart(serusbcfg.usbp, &usbcfg);
- usbConnectBus(serusbcfg.usbp);
- chThdSleepMilliseconds(100);
-
- /*
- * Shell manager initialization.
- */
- shellInit();
-
- /*
- * Initializes the SDIO drivers.
- */
- mmcObjectInit(&MMCD1);
- mmcStart(&MMCD1, &mmccfg);
-
- /*
- * Normal main() thread activity, in this demo it does nothing except
- * sleeping in a loop and check the button state.
- */
- while (TRUE) {
- if (!shelltp && (SDU1.config->usbp->state == USB_ACTIVE))
- shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO);
- else if (chThdTerminated(shelltp)) {
- chThdRelease(shelltp); /* Recovers memory of the previous shell. */
- shelltp = NULL; /* Triggers spawning of a new shell. */
- }
- chThdSleepMilliseconds(1000);
-}
-
-}
|