diff options
Diffstat (limited to 'testhal/SPC563Mxx/ADC/mcuconf.h')
| -rw-r--r-- | testhal/SPC563Mxx/ADC/mcuconf.h | 122 |
1 files changed, 122 insertions, 0 deletions
diff --git a/testhal/SPC563Mxx/ADC/mcuconf.h b/testhal/SPC563Mxx/ADC/mcuconf.h new file mode 100644 index 000000000..18cc088ac --- /dev/null +++ b/testhal/SPC563Mxx/ADC/mcuconf.h @@ -0,0 +1,122 @@ +/*
+ SPC5 HAL - Copyright (C) 2013 STMicroelectronics
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/*
+ * SPC563Mxx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 1...15 Lowest...Highest.
+ * DMA priorities:
+ * 0...15 Highest...Lowest.
+ */
+
+#define SPC563Mxx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define SPC5_NO_INIT FALSE
+#define SPC5_CLK_BYPASS FALSE
+#define SPC5_ALLOW_OVERCLOCK FALSE
+#define SPC5_CLK_PREDIV_VALUE 2
+#define SPC5_CLK_MFD_VALUE 80
+#define SPC5_CLK_RFD SPC5_RFD_DIV4
+#define SPC5_FLASH_BIUCR (BIUCR_BANK1_TOO | \
+ BIUCR_MASTER4_PREFETCH | \
+ BIUCR_MASTER0_PREFETCH | \
+ BIUCR_DPFEN | \
+ BIUCR_IPFEN | \
+ BIUCR_PFLIM_ON_MISS | \
+ BIUCR_BFEN)
+
+/*
+ * EDMA driver settings.
+ */
+#define SPC5_EDMA_CR_SETTING (EDMA_CR_GRP3PRI(3) | \
+ EDMA_CR_GRP2PRI(2) | \
+ EDMA_CR_GRP1PRI(1) | \
+ EDMA_CR_GRP0PRI(0) | \
+ EDMA_CR_ERGA)
+#define SPC5_EDMA_GROUP0_PRIORITIES \
+ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
+#define SPC5_EDMA_GROUP1_PRIORITIES \
+ 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
+#define SPC5_EDMA_ERROR_IRQ_PRIO 2
+#define SPC5_EDMA_ERROR_HANDLER() chSysHalt()
+
+/*
+ * ADC driver settings.
+ */
+#define SPC5_ADC_USE_ADC0_Q0 TRUE
+#define SPC5_ADC_USE_ADC0_Q1 TRUE
+#define SPC5_ADC_USE_ADC0_Q2 TRUE
+#define SPC5_ADC_USE_ADC1_Q3 TRUE
+#define SPC5_ADC_USE_ADC1_Q4 TRUE
+#define SPC5_ADC_USE_ADC1_Q5 TRUE
+#define SPC5_ADC_FIFO0_DMA_IRQ_PRIO 12
+#define SPC5_ADC_FIFO1_DMA_IRQ_PRIO 12
+#define SPC5_ADC_FIFO2_DMA_IRQ_PRIO 12
+#define SPC5_ADC_FIFO3_DMA_IRQ_PRIO 12
+#define SPC5_ADC_FIFO4_DMA_IRQ_PRIO 12
+#define SPC5_ADC_FIFO5_DMA_IRQ_PRIO 12
+#define SPC5_ADC_CR_CLK_PS ADC_CR_CLK_PS(5)
+#define SPC5_ADC_PUDCR {ADC_PUDCR_NONE, \
+ ADC_PUDCR_NONE, \
+ ADC_PUDCR_NONE, \
+ ADC_PUDCR_NONE, \
+ ADC_PUDCR_NONE, \
+ ADC_PUDCR_NONE, \
+ ADC_PUDCR_NONE, \
+ ADC_PUDCR_NONE}
+
+/*
+ * SERIAL driver system settings.
+ */
+#define SPC5_USE_ESCIA TRUE
+#define SPC5_USE_ESCIB TRUE
+#define SPC5_ESCIA_PRIORITY 8
+#define SPC5_ESCIB_PRIORITY 8
+
+/*
+ * SPI driver system settings.
+ */
+#define SPC5_SPI_USE_DSPI1 FALSE
+#define SPC5_SPI_USE_DSPI2 FALSE
+#define SPC5_SPI_DSPI1_MCR (SPC5_MCR_PCSIS0 | \
+ SPC5_MCR_PCSIS1 | \
+ SPC5_MCR_PCSIS2 | \
+ SPC5_MCR_PCSIS3 | \
+ SPC5_MCR_PCSIS4 | \
+ SPC5_MCR_PCSIS5 | \
+ SPC5_MCR_PCSIS6 | \
+ SPC5_MCR_PCSIS7)
+#define SPC5_SPI_DSPI2_MCR (SPC5_MCR_PCSIS0 | \
+ SPC5_MCR_PCSIS1 | \
+ SPC5_MCR_PCSIS2 | \
+ SPC5_MCR_PCSIS3 | \
+ SPC5_MCR_PCSIS4 | \
+ SPC5_MCR_PCSIS5 | \
+ SPC5_MCR_PCSIS6 | \
+ SPC5_MCR_PCSIS7)
+#define SPC5_SPI_DSPI1_DMA_IRQ_PRIO 10
+#define SPC5_SPI_DSPI2_DMA_IRQ_PRIO 10
+#define SPC5_SPI_DSPI1_IRQ_PRIO 10
+#define SPC5_SPI_DSPI2_IRQ_PRIO 10
+#define SPC5_SPI_DMA_ERROR_HOOK(spip) chSysHalt()
|