diff options
Diffstat (limited to 'testhal/LPC122x')
| -rw-r--r-- | testhal/LPC122x/EXT/Makefile | 196 | ||||
| -rw-r--r-- | testhal/LPC122x/EXT/chconf.h | 532 | ||||
| -rw-r--r-- | testhal/LPC122x/EXT/halconf.h | 313 | ||||
| -rw-r--r-- | testhal/LPC122x/EXT/main.c | 111 | ||||
| -rw-r--r-- | testhal/LPC122x/EXT/mcuconf.h | 124 | ||||
| -rw-r--r-- | testhal/LPC122x/IRQ_STORM/Makefile | 196 | ||||
| -rw-r--r-- | testhal/LPC122x/IRQ_STORM/chconf.h | 531 | ||||
| -rw-r--r-- | testhal/LPC122x/IRQ_STORM/halconf.h | 312 | ||||
| -rw-r--r-- | testhal/LPC122x/IRQ_STORM/main.c | 324 | ||||
| -rw-r--r-- | testhal/LPC122x/IRQ_STORM/mcuconf.h | 84 | ||||
| -rw-r--r-- | testhal/LPC122x/IRQ_STORM/readme.txt | 25 | ||||
| -rw-r--r-- | testhal/LPC122x/PWM/Makefile | 196 | ||||
| -rw-r--r-- | testhal/LPC122x/PWM/chconf.h | 532 | ||||
| -rw-r--r-- | testhal/LPC122x/PWM/halconf.h | 313 | ||||
| -rw-r--r-- | testhal/LPC122x/PWM/main.c | 96 | ||||
| -rw-r--r-- | testhal/LPC122x/PWM/mcuconf.h | 124 | ||||
| -rw-r--r-- | testhal/LPC122x/RTC/Makefile | 199 | ||||
| -rw-r--r-- | testhal/LPC122x/RTC/chconf.h | 532 | ||||
| -rw-r--r-- | testhal/LPC122x/RTC/halconf.h | 313 | ||||
| -rw-r--r-- | testhal/LPC122x/RTC/main.c | 286 | ||||
| -rw-r--r-- | testhal/LPC122x/RTC/mcuconf.h | 124 |
21 files changed, 0 insertions, 5463 deletions
diff --git a/testhal/LPC122x/EXT/Makefile b/testhal/LPC122x/EXT/Makefile deleted file mode 100644 index 507fe3f00..000000000 --- a/testhal/LPC122x/EXT/Makefile +++ /dev/null @@ -1,196 +0,0 @@ -##############################################################################
-# Build global options
-# NOTE: Can be overridden externally.
-#
-
-# Compiler options here.
-ifeq ($(USE_OPT),)
- USE_OPT = -O2 -ggdb -fomit-frame-pointer
-endif
-
-# C specific options here (added to USE_OPT).
-ifeq ($(USE_COPT),)
- USE_COPT =
-endif
-
-# C++ specific options here (added to USE_OPT).
-ifeq ($(USE_CPPOPT),)
- USE_CPPOPT = -fno-rtti
-endif
-
-# Enable this if you want the linker to remove unused code and data
-ifeq ($(USE_LINK_GC),)
- USE_LINK_GC = yes
-endif
-
-# If enabled, this option allows to compile the application in THUMB mode.
-ifeq ($(USE_THUMB),)
- USE_THUMB = yes
-endif
-
-# Enable this if you want to see the full log while compiling.
-ifeq ($(USE_VERBOSE_COMPILE),)
- USE_VERBOSE_COMPILE = no
-endif
-
-#
-# Build global options
-##############################################################################
-
-##############################################################################
-# Architecture or project specific options
-#
-
-#
-# Architecture or project specific options
-##############################################################################
-
-##############################################################################
-# Project, sources and paths
-#
-
-# Define project name here
-PROJECT = ch
-
-# Imported source files and paths
-CHIBIOS = ../../..
-include $(CHIBIOS)/boards/OLIMEX_LPC-P1227/board.mk
-include $(CHIBIOS)/os/hal/platforms/LPC122x/platform.mk
-include $(CHIBIOS)/os/hal/hal.mk
-include $(CHIBIOS)/os/ports/GCC/ARMCMx/LPC122x/port.mk
-include $(CHIBIOS)/os/kernel/kernel.mk
-include $(CHIBIOS)/test/test.mk
-
-# Define linker script file here
-LDSCRIPT= $(PORTLD)/LPC1227.ld
-
-# C sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CSRC = $(PORTSRC) \
- $(KERNSRC) \
- $(TESTSRC) \
- $(HALSRC) \
- $(PLATFORMSRC) \
- $(BOARDSRC) \
- $(CHIBIOS)/os/various/evtimer.c \
- $(CHIBIOS)/os/various/syscalls.c \
- main.c
-
-# C++ sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CPPSRC =
-
-# C sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACSRC =
-
-# C++ sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACPPSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCPPSRC =
-
-# List ASM source files here
-ASMSRC = $(PORTASM)
-
-INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC) \
- $(CHIBIOS)/os/various
-
-#
-# Project, sources and paths
-##############################################################################
-
-##############################################################################
-# Compiler settings
-#
-
-MCU = cortex-m0
-
-TRGT = arm-none-eabi-
-CC = $(TRGT)gcc
-CPPC = $(TRGT)g++
-# Enable loading with g++ only if you need C++ runtime support.
-# NOTE: You can use C++ even without C++ support if you are careful. C++
-# runtime support makes code size explode.
-LD = $(TRGT)gcc
-#LD = $(TRGT)g++
-CP = $(TRGT)objcopy
-AS = $(TRGT)gcc -x assembler-with-cpp
-OD = $(TRGT)objdump
-HEX = $(CP) -O ihex
-BIN = $(CP) -O binary
-
-# ARM-specific options here
-AOPT =
-
-# THUMB-specific options here
-TOPT = -mthumb -DTHUMB
-
-# Define C warning options here
-CWARN = -Wall -Wextra -Wstrict-prototypes
-
-# Define C++ warning options here
-CPPWARN = -Wall -Wextra
-
-#
-# Compiler settings
-##############################################################################
-
-##############################################################################
-# Start of default section
-#
-
-# List all default C defines here, like -D_DEBUG=1
-DDEFS = -DLPC1227 -D__NEWLIB__
-
-# List all default ASM defines here, like -D_DEBUG=1
-DADEFS =
-
-# List all default directories to look for include files here
-DINCDIR =
-
-# List the default directory to look for the libraries here
-DLIBDIR =
-
-# List all default libraries here
-DLIBS =
-
-#
-# End of default section
-##############################################################################
-
-##############################################################################
-# Start of user section
-#
-
-# List all user C define here, like -D_DEBUG=1
-UDEFS =
-
-# Define ASM defines here
-UADEFS =
-
-# List all user directories here
-UINCDIR =
-
-# List the user directory to look for the libraries here
-ULIBDIR =
-
-# List all user libraries here
-ULIBS =
-
-#
-# End of user defines
-##############################################################################
-
-include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk
diff --git a/testhal/LPC122x/EXT/chconf.h b/testhal/LPC122x/EXT/chconf.h deleted file mode 100644 index 04ff997d1..000000000 --- a/testhal/LPC122x/EXT/chconf.h +++ /dev/null @@ -1,532 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
- LPC122x EXT driver - Copyright (C) 2013 Marcin Jokel
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/chconf.h
- * @brief Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- * contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef _CHCONF_H_
-#define _CHCONF_H_
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- * setting also defines the system tick time unit.
- */
-#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__)
-#define CH_FREQUENCY 1000
-#endif
-
-/**
- * @brief Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- * threads before preemption occurs. Setting this value to zero
- * disables the preemption for threads with equal priority and the
- * round robin becomes cooperative. Note that higher priority
- * threads can still preempt, the kernel is always preemptive.
- *
- * @note Disabling the round robin preemption makes the kernel more compact
- * and generally faster.
- */
-#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__)
-#define CH_TIME_QUANTUM 20
-#endif
-
-/**
- * @brief Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- * then the whole available RAM is used. The core memory is made
- * available to the heap allocator and/or can be used directly through
- * the simplified core memory allocator.
- *
- * @note In order to let the OS manage the whole RAM the linker script must
- * provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note Requires @p CH_USE_MEMCORE.
- */
-#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__)
-#define CH_MEMCORE_SIZE 0
-#endif
-
-/**
- * @brief Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread automatically. The application has
- * then the responsibility to do one of the following:
- * - Spawn a custom idle thread at priority @p IDLEPRIO.
- * - Change the main() thread priority to @p IDLEPRIO then enter
- * an endless loop. In this scenario the @p main() thread acts as
- * the idle thread.
- * .
- * @note Unless an idle thread is spawned the @p main() thread must not
- * enter a sleep state.
- */
-#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__)
-#define CH_NO_IDLE_THREAD FALSE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- * is used when two possible implementations exist.
- *
- * @note This is not related to the compiler optimization options.
- * @note The default is @p TRUE.
- */
-#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__)
-#define CH_OPTIMIZE_SPEED TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__)
-#define CH_USE_REGISTRY TRUE
-#endif
-
-/**
- * @brief Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- * the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__)
-#define CH_USE_WAITEXIT TRUE
-#endif
-
-/**
- * @brief Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__)
-#define CH_USE_SEMAPHORES TRUE
-#endif
-
-/**
- * @brief Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- * priority rather than in FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special requirements.
- * @note Requires @p CH_USE_SEMAPHORES.
- */
-#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__)
-#define CH_USE_SEMAPHORES_PRIORITY FALSE
-#endif
-
-/**
- * @brief Atomic semaphore API.
- * @details If enabled then the semaphores the @p chSemSignalWait() API
- * is included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_SEMAPHORES.
- */
-#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__)
-#define CH_USE_SEMSW TRUE
-#endif
-
-/**
- * @brief Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__)
-#define CH_USE_MUTEXES TRUE
-#endif
-
-/**
- * @brief Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_MUTEXES.
- */
-#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__)
-#define CH_USE_CONDVARS TRUE
-#endif
-
-/**
- * @brief Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- * specification are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_CONDVARS.
- */
-#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__)
-#define CH_USE_CONDVARS_TIMEOUT TRUE
-#endif
-
-/**
- * @brief Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__)
-#define CH_USE_EVENTS TRUE
-#endif
-
-/**
- * @brief Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- * are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_EVENTS.
- */
-#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__)
-#define CH_USE_EVENTS_TIMEOUT TRUE
-#endif
-
-/**
- * @brief Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__)
-#define CH_USE_MESSAGES TRUE
-#endif
-
-/**
- * @brief Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- * FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special requirements.
- * @note Requires @p CH_USE_MESSAGES.
- */
-#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__)
-#define CH_USE_MESSAGES_PRIORITY FALSE
-#endif
-
-/**
- * @brief Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- * included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_SEMAPHORES.
- */
-#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__)
-#define CH_USE_MAILBOXES TRUE
-#endif
-
-/**
- * @brief I/O Queues APIs.
- * @details If enabled then the I/O queues APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__)
-#define CH_USE_QUEUES TRUE
-#endif
-
-/**
- * @brief Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__)
-#define CH_USE_MEMCORE TRUE
-#endif
-
-/**
- * @brief Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or
- * @p CH_USE_SEMAPHORES.
- * @note Mutexes are recommended.
- */
-#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__)
-#define CH_USE_HEAP TRUE
-#endif
-
-/**
- * @brief C-runtime allocator.
- * @details If enabled the the heap allocator APIs just wrap the C-runtime
- * @p malloc() and @p free() functions.
- *
- * @note The default is @p FALSE.
- * @note Requires @p CH_USE_HEAP.
- * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the
- * appropriate documentation.
- */
-#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__)
-#define CH_USE_MALLOC_HEAP FALSE
-#endif
-
-/**
- * @brief Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__)
-#define CH_USE_MEMPOOLS TRUE
-#endif
-
-/**
- * @brief Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_WAITEXIT.
- * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS.
- */
-#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__)
-#define CH_USE_DYNAMIC TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- * at runtime.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__)
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
-#endif
-
-/**
- * @brief Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- * parameters are activated.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_CHECKS FALSE
-#endif
-
-/**
- * @brief Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- * activated. This includes consistency checks inside the kernel,
- * runtime anomalies and port-defined checks.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_ASSERTS FALSE
-#endif
-
-/**
- * @brief Debug option, trace buffer.
- * @details If enabled then the context switch circular trace buffer is
- * activated.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_TRACE FALSE
-#endif
-
-/**
- * @brief Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note The default is @p FALSE.
- * @note The stack check is performed in a architecture/port dependent way.
- * It may not be implemented or some ports.
- * @note The default failure mode is to halt the system with the global
- * @p panic_msg variable set to @p NULL.
- */
-#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_STACK_CHECK FALSE
-#endif
-
-/**
- * @brief Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- * value when a thread is created. This can be useful for the
- * runtime measurement of the used stack.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__)
-#define CH_DBG_FILL_THREADS FALSE
-#endif
-
-/**
- * @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p Thread structure that
- * counts the system ticks occurred while executing the thread.
- *
- * @note The default is @p TRUE.
- * @note This debug option is defaulted to TRUE because it is required by
- * some test cases into the test suite.
- */
-#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__)
-#define CH_DBG_THREADS_PROFILING TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Threads descriptor structure extension.
- * @details User fields added to the end of the @p Thread structure.
- */
-#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__)
-#define THREAD_EXT_FIELDS \
- /* Add threads custom fields here.*/
-#endif
-
-/**
- * @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
- *
- * @note It is invoked from within @p chThdInit() and implicitly from all
- * the threads creation APIs.
- */
-#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__)
-#define THREAD_EXT_INIT_HOOK(tp) { \
- /* Add threads initialization code here.*/ \
-}
-#endif
-
-/**
- * @brief Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- *
- * @note It is inserted into lock zone.
- * @note It is also invoked when the threads simply return in order to
- * terminate.
- */
-#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__)
-#define THREAD_EXT_EXIT_HOOK(tp) { \
- /* Add threads finalization code here.*/ \
-}
-#endif
-
-/**
- * @brief Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__)
-#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \
- /* System halt code here.*/ \
-}
-#endif
-
-/**
- * @brief Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__)
-#define IDLE_LOOP_HOOK() { \
- /* Idle loop code here.*/ \
-}
-#endif
-
-/**
- * @brief System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- * after processing the virtual timers queue.
- */
-#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__)
-#define SYSTEM_TICK_EVENT_HOOK() { \
- /* System tick event code here.*/ \
-}
-#endif
-
-/**
- * @brief System halt hook.
- * @details This hook is invoked in case to a system halting error before
- * the system is halted.
- */
-#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
-#define SYSTEM_HALT_HOOK() { \
- /* System halt code here.*/ \
-}
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h). */
-/*===========================================================================*/
-
-#endif /* _CHCONF_H_ */
-
-/** @} */
diff --git a/testhal/LPC122x/EXT/halconf.h b/testhal/LPC122x/EXT/halconf.h deleted file mode 100644 index 8cb1fcc41..000000000 --- a/testhal/LPC122x/EXT/halconf.h +++ /dev/null @@ -1,313 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
- LPC122x EXT driver - Copyright (C) 2013 Marcin Jokel
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/halconf.h
- * @brief HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- * various device drivers from your application. You may also use
- * this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef _HALCONF_H_
-#define _HALCONF_H_
-
-#include "mcuconf.h"
-
-/**
- * @brief Enables the TM subsystem.
- */
-#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
-#define HAL_USE_TM FALSE
-#endif
-
-/**
- * @brief Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
-#endif
-
-/**
- * @brief Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
-#endif
-
-/**
- * @brief Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
-#endif
-
-/**
- * @brief Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT TRUE
-#endif
-
-/**
- * @brief Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT TRUE
-#endif
-
-/**
- * @brief Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C FALSE
-#endif
-
-/**
- * @brief Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
-#endif
-
-/**
- * @brief Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC FALSE
-#endif
-
-/**
- * @brief Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI FALSE
-#endif
-
-/**
- * @brief Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM FALSE
-#endif
-
-/**
- * @brief Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC FALSE
-#endif
-
-/**
- * @brief Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL TRUE
-#endif
-
-/**
- * @brief Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB FALSE
-#endif
-
-/**
- * @brief Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI FALSE
-#endif
-
-/**
- * @brief Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
-#endif
-
-/**
- * @brief Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY FALSE
-#endif
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- * This option is recommended also if the SPI driver does not
- * use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Number of initialization attempts before rejecting the card.
- * @note Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY 100
-#endif
-
-/**
- * @brief Include support for MMC cards.
- * @note MMC support is not yet implemented so this option must be kept
- * at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT FALSE
-#endif
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- * default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE 38400
-#endif
-
-/**
- * @brief Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- * buffers depending on the requirements of your application.
- * @note The default is 64 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 16
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-#endif /* _HALCONF_H_ */
-
-/** @} */
diff --git a/testhal/LPC122x/EXT/main.c b/testhal/LPC122x/EXT/main.c deleted file mode 100644 index 76cafce0e..000000000 --- a/testhal/LPC122x/EXT/main.c +++ /dev/null @@ -1,111 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
- LPC122x EXT driver - Copyright (C) 2013 Marcin Jokel
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-static void led1off(void *arg) {
-
- (void)arg;
- palSetPad(GPIO1, GPIO1_LED1);
-}
-
-/* Triggered when the button is pressed or released. The LED1 is set to ON.*/
-static void ext2cb12(EXTDriver *extp, expchannel_t channel) {
- static VirtualTimer vt4;
-
- (void)extp;
- (void)channel;
-
- palClearPad(GPIO1, GPIO1_LED1);
- chSysLockFromIsr();
- if (chVTIsArmedI(&vt4))
- chVTResetI(&vt4);
-
- /* LED1 set to OFF after 200mS.*/
- chVTSetI(&vt4, MS2ST(200), led1off, NULL);
- chSysUnlockFromIsr();
-}
-
-static const EXTConfig extcfg = {
- {
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_BOTH_EDGES | EXT_CH_MODE_AUTOSTART, ext2cb12},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL},
- {EXT_CH_MODE_DISABLED, NULL}
- }
-};
-
-/*
- * Application entry point.
- */
-int main(void) {
-
- /*
- * System initializations.
- * - HAL initialization, this also initializes the configured device drivers
- * and performs the board-specific initializations.
- * - Kernel initialization, the main() function becomes a thread and the
- * RTOS is active.
- */
- halInit();
- chSysInit();
-
- /*
- * Activates the EXT driver 1.
- */
- extStart(&EXTD2, &extcfg);
-
- /*
- * Normal main() thread activity, in this demo it enables and disables the
- * button EXT channel using 5 seconds intervals.
- */
- while (TRUE) {
- chThdSleepMilliseconds(5000);
- extChannelDisable(&EXTD2, GPIO2_SW_USER1);
- chThdSleepMilliseconds(5000);
- extChannelEnable(&EXTD2, GPIO2_SW_USER1);
- }
-}
diff --git a/testhal/LPC122x/EXT/mcuconf.h b/testhal/LPC122x/EXT/mcuconf.h deleted file mode 100644 index 608abf226..000000000 --- a/testhal/LPC122x/EXT/mcuconf.h +++ /dev/null @@ -1,124 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
- LPC122x EXT driver - Copyright (C) 2013 Marcin Jokel
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/*
- * LPC1227 drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the driver
- * is enabled in halconf.h.
- *
- * IRQ priorities:
- * 3...0 Lowest...highest.
- */
-
-/*
- * HAL driver system settings.
- */
-#define LPC122x_PLLCLK_SOURCE SYSPLLCLKSEL_SYSOSC
-#define LPC122x_SYSPLL_MUL 3
-#define LPC122x_SYSPLL_DIV 8
-#define LPC122x_MAINCLK_SOURCE SYSMAINCLKSEL_PLLOUT
-#define LPC122x_SYSABHCLK_DIV 1
-
-/*
- * GPT driver system settings.
- */
-#define LPC122x_GPT_USE_CT16B0 TRUE
-#define LPC122x_GPT_USE_CT16B1 TRUE
-#define LPC122x_GPT_USE_CT32B0 TRUE
-#define LPC122x_GPT_USE_CT32B1 TRUE
-#define LPC122x_GPT_CT16B0_IRQ_PRIORITY 2
-#define LPC122x_GPT_CT16B1_IRQ_PRIORITY 2
-#define LPC122x_GPT_CT32B0_IRQ_PRIORITY 2
-#define LPC122x_GPT_CT32B1_IRQ_PRIORITY 2
-
-/*
- * SERIAL driver system settings.
- */
-#define LPC122x_SERIAL_USE_UART0 TRUE
-#define LPC122x_SERIAL_FIFO_PRELOAD 16
-#define LPC122x_SERIAL_UART0CLKDIV 1
-#define LPC122x_SERIAL_UART0_IRQ_PRIORITY 3
-#define LPC122x_SERIAL_TXD0_SELECTOR TXD0_IS_PIO0_2
-#define LPC122x_SERIAL_RXD0_SELECTOR RXD0_IS_PIO0_1
-
-#define LPC122x_SERIAL_USE_UART1 FALSE
-#define LPC122x_SERIAL_FIFO_PRELOAD 16
-#define LPC122x_SERIAL_UART1CLKDIV 1
-#define LPC122x_SERIAL_UART1_IRQ_PRIORITY 3
-#define LPC122x_SERIAL_RXD1_SELECTOR RXD1_IS_PIO0_8
-#define LPC122x_SERIAL_TXD1_SELECTOR TXD1_IS_PIO0_9
-
-/*
- * SPI driver system settings.
- */
-#define LPC122x_SPI_USE_SSP0 TRUE
-#define LPC122x_SPI_SSP0CLKDIV 1
-#define LPC122x_SPI_SSP0_IRQ_PRIORITY 1
-#define LPC122x_SPI_SSP_ERROR_HOOK(spip) chSysHalt()
-
-/*
- * EXT driver system settings.
- */
-#define LPC122x_EXT_USE_EXT0 FALSE
-#define LPC122x_EXT_USE_EXT1 FALSE
-#define LPC122x_EXT_USE_EXT2 TRUE
-#define LPC122x_EXT_EXTI0_IRQ_PRIORITY 3
-#define LPC122x_EXT_EXTI1_IRQ_PRIORITY 3
-#define LPC122x_EXT_EXTI2_IRQ_PRIORITY 3
-
-/*
- * RTC driver system settings.
- */
-#define LPC122x_RTCCLK SYSCFG_RTCCLK_1Hz
-#define LPC122x_RTC_CLKDIV 0
-#define LPC122x_RTC_USE_ALARM TRUE
-#define LPC122x_RTC_IRQ_PRIORITY 3
-
-/*
- * PWM driver system settings.
- */
-#define LPC122x_PWM_USE_CT16B0 FALSE
-#define LPC122x_PWM_USE_CT16B1 TRUE
-#define LPC122x_PWM_USE_CT32B0 FALSE
-#define LPC122x_PWM_USE_CT32B1 FALSE
-#define LPC122x_PWM_USE_CT16B0_CH0 FALSE
-#define LPC122x_PWM_USE_CT16B0_CH1 FALSE
-#define LPC122x_PWM_USE_CT16B1_CH0 TRUE
-#define LPC122x_PWM_USE_CT16B1_CH1 TRUE
-#define LPC122x_PWM_USE_CT32B0_CH0 FALSE
-#define LPC122x_PWM_USE_CT32B0_CH1 FALSE
-#define LPC122x_PWM_USE_CT32B1_CH0 FALSE
-#define LPC122x_PWM_USE_CT32B1_CH1 FALSE
-#define LPC122x_PWM_CT16B0_IRQ_PRIORITY 3
-#define LPC122x_PWM_CT16B1_IRQ_PRIORITY 3
-#define LPC122x_PWM_CT32B0_IRQ_PRIORITY 3
-#define LPC122x_PWM_CT32B1_IRQ_PRIORITY 3
-#define LPC122x_PWM_CT16B0_CH0_SELECTOR PWM_CT16B0_CH0_IS_PIO0_28
-#define LPC122x_PWM_CT16B0_CH1_SELECTOR PWM_CT16B0_CH1_IS_PIO0_29
-#define LPC122x_PWM_CT16B1_CH0_SELECTOR PWM_CT16B1_CH0_IS_PIO1_5
-#define LPC122x_PWM_CT16B1_CH1_SELECTOR PWM_CT16B1_CH1_IS_PIO1_6
-#define LPC122x_PWM_CT32B0_CH0_SELECTOR PWM_CT32B0_CH0_IS_PIO2_4
-#define LPC122x_PWM_CT32B0_CH1_SELECTOR PWM_CT32B0_CH1_IS_PIO0_2
-#define LPC122x_PWM_CT32B1_CH0_SELECTOR PWM_CT32B1_CH0_IS_PIO0_6
-#define LPC122x_PWM_CT32B1_CH1_SELECTOR PWM_CT32B1_CH1_IS_PIO0_7
-
-/*
- * I2C driver system settings.
- */
-#define LPC122x_I2C_IRQ_PRIORITY 3
diff --git a/testhal/LPC122x/IRQ_STORM/Makefile b/testhal/LPC122x/IRQ_STORM/Makefile deleted file mode 100644 index 507fe3f00..000000000 --- a/testhal/LPC122x/IRQ_STORM/Makefile +++ /dev/null @@ -1,196 +0,0 @@ -##############################################################################
-# Build global options
-# NOTE: Can be overridden externally.
-#
-
-# Compiler options here.
-ifeq ($(USE_OPT),)
- USE_OPT = -O2 -ggdb -fomit-frame-pointer
-endif
-
-# C specific options here (added to USE_OPT).
-ifeq ($(USE_COPT),)
- USE_COPT =
-endif
-
-# C++ specific options here (added to USE_OPT).
-ifeq ($(USE_CPPOPT),)
- USE_CPPOPT = -fno-rtti
-endif
-
-# Enable this if you want the linker to remove unused code and data
-ifeq ($(USE_LINK_GC),)
- USE_LINK_GC = yes
-endif
-
-# If enabled, this option allows to compile the application in THUMB mode.
-ifeq ($(USE_THUMB),)
- USE_THUMB = yes
-endif
-
-# Enable this if you want to see the full log while compiling.
-ifeq ($(USE_VERBOSE_COMPILE),)
- USE_VERBOSE_COMPILE = no
-endif
-
-#
-# Build global options
-##############################################################################
-
-##############################################################################
-# Architecture or project specific options
-#
-
-#
-# Architecture or project specific options
-##############################################################################
-
-##############################################################################
-# Project, sources and paths
-#
-
-# Define project name here
-PROJECT = ch
-
-# Imported source files and paths
-CHIBIOS = ../../..
-include $(CHIBIOS)/boards/OLIMEX_LPC-P1227/board.mk
-include $(CHIBIOS)/os/hal/platforms/LPC122x/platform.mk
-include $(CHIBIOS)/os/hal/hal.mk
-include $(CHIBIOS)/os/ports/GCC/ARMCMx/LPC122x/port.mk
-include $(CHIBIOS)/os/kernel/kernel.mk
-include $(CHIBIOS)/test/test.mk
-
-# Define linker script file here
-LDSCRIPT= $(PORTLD)/LPC1227.ld
-
-# C sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CSRC = $(PORTSRC) \
- $(KERNSRC) \
- $(TESTSRC) \
- $(HALSRC) \
- $(PLATFORMSRC) \
- $(BOARDSRC) \
- $(CHIBIOS)/os/various/evtimer.c \
- $(CHIBIOS)/os/various/syscalls.c \
- main.c
-
-# C++ sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CPPSRC =
-
-# C sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACSRC =
-
-# C++ sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACPPSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCPPSRC =
-
-# List ASM source files here
-ASMSRC = $(PORTASM)
-
-INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC) \
- $(CHIBIOS)/os/various
-
-#
-# Project, sources and paths
-##############################################################################
-
-##############################################################################
-# Compiler settings
-#
-
-MCU = cortex-m0
-
-TRGT = arm-none-eabi-
-CC = $(TRGT)gcc
-CPPC = $(TRGT)g++
-# Enable loading with g++ only if you need C++ runtime support.
-# NOTE: You can use C++ even without C++ support if you are careful. C++
-# runtime support makes code size explode.
-LD = $(TRGT)gcc
-#LD = $(TRGT)g++
-CP = $(TRGT)objcopy
-AS = $(TRGT)gcc -x assembler-with-cpp
-OD = $(TRGT)objdump
-HEX = $(CP) -O ihex
-BIN = $(CP) -O binary
-
-# ARM-specific options here
-AOPT =
-
-# THUMB-specific options here
-TOPT = -mthumb -DTHUMB
-
-# Define C warning options here
-CWARN = -Wall -Wextra -Wstrict-prototypes
-
-# Define C++ warning options here
-CPPWARN = -Wall -Wextra
-
-#
-# Compiler settings
-##############################################################################
-
-##############################################################################
-# Start of default section
-#
-
-# List all default C defines here, like -D_DEBUG=1
-DDEFS = -DLPC1227 -D__NEWLIB__
-
-# List all default ASM defines here, like -D_DEBUG=1
-DADEFS =
-
-# List all default directories to look for include files here
-DINCDIR =
-
-# List the default directory to look for the libraries here
-DLIBDIR =
-
-# List all default libraries here
-DLIBS =
-
-#
-# End of default section
-##############################################################################
-
-##############################################################################
-# Start of user section
-#
-
-# List all user C define here, like -D_DEBUG=1
-UDEFS =
-
-# Define ASM defines here
-UADEFS =
-
-# List all user directories here
-UINCDIR =
-
-# List the user directory to look for the libraries here
-ULIBDIR =
-
-# List all user libraries here
-ULIBS =
-
-#
-# End of user defines
-##############################################################################
-
-include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk
diff --git a/testhal/LPC122x/IRQ_STORM/chconf.h b/testhal/LPC122x/IRQ_STORM/chconf.h deleted file mode 100644 index 01463a470..000000000 --- a/testhal/LPC122x/IRQ_STORM/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/*
- LPC122x - Copyright (C) 2013 Marcin Jokel
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/chconf.h
- * @brief Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- * contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef _CHCONF_H_
-#define _CHCONF_H_
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- * setting also defines the system tick time unit.
- */
-#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__)
-#define CH_FREQUENCY 1000
-#endif
-
-/**
- * @brief Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- * threads before preemption occurs. Setting this value to zero
- * disables the preemption for threads with equal priority and the
- * round robin becomes cooperative. Note that higher priority
- * threads can still preempt, the kernel is always preemptive.
- *
- * @note Disabling the round robin preemption makes the kernel more compact
- * and generally faster.
- */
-#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__)
-#define CH_TIME_QUANTUM 20
-#endif
-
-/**
- * @brief Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- * then the whole available RAM is used. The core memory is made
- * available to the heap allocator and/or can be used directly through
- * the simplified core memory allocator.
- *
- * @note In order to let the OS manage the whole RAM the linker script must
- * provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note Requires @p CH_USE_MEMCORE.
- */
-#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__)
-#define CH_MEMCORE_SIZE 0
-#endif
-
-/**
- * @brief Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread automatically. The application has
- * then the responsibility to do one of the following:
- * - Spawn a custom idle thread at priority @p IDLEPRIO.
- * - Change the main() thread priority to @p IDLEPRIO then enter
- * an endless loop. In this scenario the @p main() thread acts as
- * the idle thread.
- * .
- * @note Unless an idle thread is spawned the @p main() thread must not
- * enter a sleep state.
- */
-#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__)
-#define CH_NO_IDLE_THREAD FALSE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- * is used when two possible implementations exist.
- *
- * @note This is not related to the compiler optimization options.
- * @note The default is @p TRUE.
- */
-#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__)
-#define CH_OPTIMIZE_SPEED TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__)
-#define CH_USE_REGISTRY TRUE
-#endif
-
-/**
- * @brief Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- * the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__)
-#define CH_USE_WAITEXIT TRUE
-#endif
-
-/**
- * @brief Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__)
-#define CH_USE_SEMAPHORES TRUE
-#endif
-
-/**
- * @brief Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- * priority rather than in FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special requirements.
- * @note Requires @p CH_USE_SEMAPHORES.
- */
-#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__)
-#define CH_USE_SEMAPHORES_PRIORITY FALSE
-#endif
-
-/**
- * @brief Atomic semaphore API.
- * @details If enabled then the semaphores the @p chSemSignalWait() API
- * is included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_SEMAPHORES.
- */
-#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__)
-#define CH_USE_SEMSW TRUE
-#endif
-
-/**
- * @brief Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__)
-#define CH_USE_MUTEXES TRUE
-#endif
-
-/**
- * @brief Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_MUTEXES.
- */
-#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__)
-#define CH_USE_CONDVARS TRUE
-#endif
-
-/**
- * @brief Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- * specification are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_CONDVARS.
- */
-#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__)
-#define CH_USE_CONDVARS_TIMEOUT TRUE
-#endif
-
-/**
- * @brief Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__)
-#define CH_USE_EVENTS TRUE
-#endif
-
-/**
- * @brief Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- * are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_EVENTS.
- */
-#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__)
-#define CH_USE_EVENTS_TIMEOUT TRUE
-#endif
-
-/**
- * @brief Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__)
-#define CH_USE_MESSAGES TRUE
-#endif
-
-/**
- * @brief Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- * FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special requirements.
- * @note Requires @p CH_USE_MESSAGES.
- */
-#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__)
-#define CH_USE_MESSAGES_PRIORITY FALSE
-#endif
-
-/**
- * @brief Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- * included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_SEMAPHORES.
- */
-#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__)
-#define CH_USE_MAILBOXES TRUE
-#endif
-
-/**
- * @brief I/O Queues APIs.
- * @details If enabled then the I/O queues APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__)
-#define CH_USE_QUEUES TRUE
-#endif
-
-/**
- * @brief Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__)
-#define CH_USE_MEMCORE TRUE
-#endif
-
-/**
- * @brief Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or
- * @p CH_USE_SEMAPHORES.
- * @note Mutexes are recommended.
- */
-#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__)
-#define CH_USE_HEAP TRUE
-#endif
-
-/**
- * @brief C-runtime allocator.
- * @details If enabled the the heap allocator APIs just wrap the C-runtime
- * @p malloc() and @p free() functions.
- *
- * @note The default is @p FALSE.
- * @note Requires @p CH_USE_HEAP.
- * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the
- * appropriate documentation.
- */
-#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__)
-#define CH_USE_MALLOC_HEAP FALSE
-#endif
-
-/**
- * @brief Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__)
-#define CH_USE_MEMPOOLS TRUE
-#endif
-
-/**
- * @brief Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_WAITEXIT.
- * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS.
- */
-#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__)
-#define CH_USE_DYNAMIC TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- * at runtime.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__)
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
-#endif
-
-/**
- * @brief Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- * parameters are activated.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_CHECKS FALSE
-#endif
-
-/**
- * @brief Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- * activated. This includes consistency checks inside the kernel,
- * runtime anomalies and port-defined checks.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_ASSERTS FALSE
-#endif
-
-/**
- * @brief Debug option, trace buffer.
- * @details If enabled then the context switch circular trace buffer is
- * activated.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_TRACE FALSE
-#endif
-
-/**
- * @brief Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note The default is @p FALSE.
- * @note The stack check is performed in a architecture/port dependent way.
- * It may not be implemented or some ports.
- * @note The default failure mode is to halt the system with the global
- * @p panic_msg variable set to @p NULL.
- */
-#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_STACK_CHECK FALSE
-#endif
-
-/**
- * @brief Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- * value when a thread is created. This can be useful for the
- * runtime measurement of the used stack.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__)
-#define CH_DBG_FILL_THREADS FALSE
-#endif
-
-/**
- * @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p Thread structure that
- * counts the system ticks occurred while executing the thread.
- *
- * @note The default is @p TRUE.
- * @note This debug option is defaulted to TRUE because it is required by
- * some test cases into the test suite.
- */
-#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__)
-#define CH_DBG_THREADS_PROFILING TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Threads descriptor structure extension.
- * @details User fields added to the end of the @p Thread structure.
- */
-#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__)
-#define THREAD_EXT_FIELDS \
- /* Add threads custom fields here.*/
-#endif
-
-/**
- * @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
- *
- * @note It is invoked from within @p chThdInit() and implicitly from all
- * the threads creation APIs.
- */
-#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__)
-#define THREAD_EXT_INIT_HOOK(tp) { \
- /* Add threads initialization code here.*/ \
-}
-#endif
-
-/**
- * @brief Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- *
- * @note It is inserted into lock zone.
- * @note It is also invoked when the threads simply return in order to
- * terminate.
- */
-#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__)
-#define THREAD_EXT_EXIT_HOOK(tp) { \
- /* Add threads finalization code here.*/ \
-}
-#endif
-
-/**
- * @brief Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__)
-#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \
- /* System halt code here.*/ \
-}
-#endif
-
-/**
- * @brief Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__)
-#define IDLE_LOOP_HOOK() { \
- /* Idle loop code here.*/ \
-}
-#endif
-
-/**
- * @brief System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- * after processing the virtual timers queue.
- */
-#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__)
-#define SYSTEM_TICK_EVENT_HOOK() { \
- /* System tick event code here.*/ \
-}
-#endif
-
-/**
- * @brief System halt hook.
- * @details This hook is invoked in case to a system halting error before
- * the system is halted.
- */
-#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
-#define SYSTEM_HALT_HOOK() { \
- /* System halt code here.*/ \
-}
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h). */
-/*===========================================================================*/
-
-#endif /* _CHCONF_H_ */
-
-/** @} */
diff --git a/testhal/LPC122x/IRQ_STORM/halconf.h b/testhal/LPC122x/IRQ_STORM/halconf.h deleted file mode 100644 index 1f2b374a7..000000000 --- a/testhal/LPC122x/IRQ_STORM/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/*
- LPC122x - Copyright (C) 2013 Marcin Jokel
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/halconf.h
- * @brief HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- * various device drivers from your application. You may also use
- * this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef _HALCONF_H_
-#define _HALCONF_H_
-
-#include "mcuconf.h"
-
-/**
- * @brief Enables the TM subsystem.
- */
-#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
-#define HAL_USE_TM FALSE
-#endif
-
-/**
- * @brief Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
-#endif
-
-/**
- * @brief Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
-#endif
-
-/**
- * @brief Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
-#endif
-
-/**
- * @brief Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT FALSE
-#endif
-
-/**
- * @brief Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT TRUE
-#endif
-
-/**
- * @brief Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C FALSE
-#endif
-
-/**
- * @brief Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
-#endif
-
-/**
- * @brief Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC FALSE
-#endif
-
-/**
- * @brief Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI FALSE
-#endif
-
-/**
- * @brief Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM FALSE
-#endif
-
-/**
- * @brief Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC FALSE
-#endif
-
-/**
- * @brief Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL TRUE
-#endif
-
-/**
- * @brief Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB FALSE
-#endif
-
-/**
- * @brief Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI FALSE
-#endif
-
-/**
- * @brief Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
-#endif
-
-/**
- * @brief Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY FALSE
-#endif
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- * This option is recommended also if the SPI driver does not
- * use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Number of initialization attempts before rejecting the card.
- * @note Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY 100
-#endif
-
-/**
- * @brief Include support for MMC cards.
- * @note MMC support is not yet implemented so this option must be kept
- * at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT FALSE
-#endif
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- * default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE 38400
-#endif
-
-/**
- * @brief Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- * buffers depending on the requirements of your application.
- * @note The default is 64 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 16
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-#endif /* _HALCONF_H_ */
-
-/** @} */
diff --git a/testhal/LPC122x/IRQ_STORM/main.c b/testhal/LPC122x/IRQ_STORM/main.c deleted file mode 100644 index ac1c51945..000000000 --- a/testhal/LPC122x/IRQ_STORM/main.c +++ /dev/null @@ -1,324 +0,0 @@ -/*
- LPC122x - Copyright (C) 2013 Marcin Jokel
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include <stdlib.h>
-
-#include "ch.h"
-#include "hal.h"
-
-/*===========================================================================*/
-/* Configurable settings. */
-/*===========================================================================*/
-
-#ifndef RANDOMIZE
-#define RANDOMIZE FALSE
-#endif
-
-#ifndef ITERATIONS
-#define ITERATIONS 100
-#endif
-
-#ifndef NUM_THREADS
-#define NUM_THREADS 4
-#endif
-
-#ifndef MAILBOX_SIZE
-#define MAILBOX_SIZE 4
-#endif
-
-/*===========================================================================*/
-/* Test related code. */
-/*===========================================================================*/
-
-#define MSG_SEND_LEFT 0
-#define MSG_SEND_RIGHT 1
-
-static bool_t saturated;
-
-/*
- * Mailboxes and buffers.
- */
-static Mailbox mb[NUM_THREADS];
-static msg_t b[NUM_THREADS][MAILBOX_SIZE];
-
-/*
- * Test worker threads.
- */
-static WORKING_AREA(waWorkerThread[NUM_THREADS], 128);
-static msg_t WorkerThread(void *arg) {
- static volatile unsigned x = 0;
- static unsigned cnt = 0;
- unsigned me = (unsigned)arg;
- unsigned target;
- unsigned r;
- msg_t msg;
-
- chRegSetThreadName("worker");
-
- /* Work loop.*/
- while (TRUE) {
- /* Waiting for a message.*/
- chMBFetch(&mb[me], &msg, TIME_INFINITE);
-
-#if RANDOMIZE
- /* Pseudo-random delay.*/
- {
- chSysLock();
- r = rand() & 15;
- chSysUnlock();
- while (r--)
- x++;
- }
-#else
- /* Fixed delay.*/
- {
- r = me >> 4;
- while (r--)
- x++;
- }
-#endif
-
- /* Deciding in which direction to re-send the message.*/
- if (msg == MSG_SEND_LEFT)
- target = me - 1;
- else
- target = me + 1;
-
- if (target < NUM_THREADS) {
- /* If this thread is not at the end of a chain re-sending the message,
- note this check works because the variable target is unsigned.*/
- msg = chMBPost(&mb[target], msg, TIME_IMMEDIATE);
- if (msg != RDY_OK)
- saturated = TRUE;
- }
- else {
- /* Provides a visual feedback about the system.*/
- if (++cnt >= 500) {
- cnt = 0;
- palTogglePad(GPIO1, GPIO1_LED1);
- }
- }
- }
-}
-
-/*
- * GPT1 callback.
- */
-static void gpt1cb(GPTDriver *gptp) {
- msg_t msg;
-
- (void)gptp;
- chSysLockFromIsr();
- msg = chMBPostI(&mb[0], MSG_SEND_RIGHT);
- if (msg != RDY_OK)
- saturated = TRUE;
- chSysUnlockFromIsr();
-}
-
-/*
- * GPT2 callback.
- */
-static void gpt2cb(GPTDriver *gptp) {
- msg_t msg;
-
- (void)gptp;
- chSysLockFromIsr();
- msg = chMBPostI(&mb[NUM_THREADS - 1], MSG_SEND_LEFT);
- if (msg != RDY_OK)
- saturated = TRUE;
- chSysUnlockFromIsr();
-}
-
-/*
- * GPT1 configuration.
- */
-static const GPTConfig gpt1cfg = {
- 1000000, /* 1MHz timer clock.*/
- gpt1cb /* Timer callback.*/
-};
-
-/*
- * GPT2 configuration.
- */
-static const GPTConfig gpt2cfg = {
- 1000000, /* 1MHz timer clock.*/
- gpt2cb /* Timer callback.*/
-};
-
-
-/*===========================================================================*/
-/* Generic demo code. */
-/*===========================================================================*/
-
-static void print(char *p) {
-
- while (*p) {
- chSequentialStreamPut(&SD1, *p++);
- }
-}
-
-static void println(char *p) {
-
- while (*p) {
- chSequentialStreamPut(&SD1, *p++);
- }
- chSequentialStreamWrite(&SD1, (uint8_t *)"\r\n", 2);
-}
-
-static void printn(uint32_t n) {
- char buf[16], *p;
-
- if (!n)
- chSequentialStreamPut(&SD1, '0');
- else {
- p = buf;
- while (n)
- *p++ = (n % 10) + '0', n /= 10;
- while (p > buf)
- chSequentialStreamPut(&SD1, *--p);
- }
-}
-
-/*
- * Application entry point.
- */
-int main(void) {
- unsigned i;
- gptcnt_t interval, threshold, worst;
-
- /*
- * System initializations.
- * - HAL initialization, this also initializes the configured device drivers
- * and performs the board-specific initializations.
- * - Kernel initialization, the main() function becomes a thread and the
- * RTOS is active.
- */
- halInit();
- chSysInit();
-
- /*
- * Prepares the Serial driver 2 and GPT drivers 1 and 2.
- */
- sdStart(&SD1, NULL); /* Default is 38400-8-N-1.*/
- gptStart(&GPTD1, &gpt1cfg);
- gptStart(&GPTD2, &gpt2cfg);
-
- /*
- * Initializes the mailboxes and creates the worker threads.
- */
- for (i = 0; i < NUM_THREADS; i++) {
- chMBInit(&mb[i], b[i], MAILBOX_SIZE);
- chThdCreateStatic(waWorkerThread[i], sizeof waWorkerThread[i],
- NORMALPRIO - 20, WorkerThread, (void *)i);
- }
-
- /*
- * Test procedure.
- */
- println("");
- println("*** ChibiOS/RT IRQ-STORM long duration test");
- println("***");
- print("*** Kernel: ");
- println(CH_KERNEL_VERSION);
-#ifdef CH_COMPILER_NAME
- print("*** Compiler: ");
- println(CH_COMPILER_NAME);
-#endif
- print("*** Architecture: ");
- println(CH_ARCHITECTURE_NAME);
-#ifdef CH_CORE_VARIANT_NAME
- print("*** Core Variant: ");
- println(CH_CORE_VARIANT_NAME);
-#endif
-#ifdef CH_PORT_INFO
- print("*** Port Info: ");
- println(CH_PORT_INFO);
-#endif
-#ifdef PLATFORM_NAME
- print("*** Platform: ");
- println(PLATFORM_NAME);
-#endif
-#ifdef BOARD_NAME
- print("*** Test Board: ");
- println(BOARD_NAME);
-#endif
- println("***");
- print("*** System Clock: ");
- printn(LPC122x_SYSCLK);
- println("");
- print("*** Iterations: ");
- printn(ITERATIONS);
- println("");
- print("*** Randomize: ");
- printn(RANDOMIZE);
- println("");
- print("*** Threads: ");
- printn(NUM_THREADS);
- println("");
- print("*** Mailbox size: ");
- printn(MAILBOX_SIZE);
- println("");
-
- println("");
- worst = 0;
- for (i = 1; i <= ITERATIONS; i++){
- print("Iteration ");
- printn(i);
- println("");
- saturated = FALSE;
- threshold = 0;
- for (interval = 2000; interval >= 20; interval -= interval / 10) {
- gptStartContinuous(&GPTD1, interval - 1); /* Slightly out of phase.*/
- gptStartContinuous(&GPTD2, interval + 1); /* Slightly out of phase.*/
- chThdSleepMilliseconds(1000);
- gptStopTimer(&GPTD1);
- gptStopTimer(&GPTD2);
- if (!saturated)
- print(".");
- else {
- print("#");
- if (threshold == 0)
- threshold = interval;
- }
- }
- /* Gives the worker threads a chance to empty the mailboxes before next
- cycle.*/
- chThdSleepMilliseconds(20);
- println("");
- print("Saturated at ");
- printn(threshold);
- println(" uS");
- println("");
- if (threshold > worst)
- worst = threshold;
- }
- gptStopTimer(&GPTD1);
- gptStopTimer(&GPTD2);
-
- print("Worst case at ");
- printn(worst);
- println(" uS");
- println("");
- println("Test Complete");
-
- /*
- * Normal main() thread activity, nothing in this test.
- */
- while (TRUE) {
- chThdSleepMilliseconds(5000);
- }
- return 0;
-}
diff --git a/testhal/LPC122x/IRQ_STORM/mcuconf.h b/testhal/LPC122x/IRQ_STORM/mcuconf.h deleted file mode 100644 index 4aa37b83c..000000000 --- a/testhal/LPC122x/IRQ_STORM/mcuconf.h +++ /dev/null @@ -1,84 +0,0 @@ -/*
- LPC122x - Copyright (C) 2013 Marcin Jokel
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/*
- * LPC1227 drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the driver
- * is enabled in halconf.h.
- *
- * IRQ priorities:
- * 3...0 Lowest...highest.
- */
-
-/*
- * HAL driver system settings.
- */
-#define LPC122x_PLLCLK_SOURCE SYSPLLCLKSEL_SYSOSC
-#define LPC122x_SYSPLL_MUL 3
-#define LPC122x_SYSPLL_DIV 8
-#define LPC122x_MAINCLK_SOURCE SYSMAINCLKSEL_PLLOUT
-#define LPC122x_SYSABHCLK_DIV 1
-
-/*
- * ADC driver system settings.
- */
-
-/*
- * CAN driver system settings.
- */
-
-/*
- * GPT driver system settings.
- */
-#define LPC122x_GPT_USE_CT16B0 TRUE
-#define LPC122x_GPT_USE_CT16B1 TRUE
-#define LPC122x_GPT_USE_CT32B0 TRUE
-#define LPC122x_GPT_USE_CT32B1 TRUE
-#define LPC122x_GPT_CT16B0_IRQ_PRIORITY 1
-#define LPC122x_GPT_CT16B1_IRQ_PRIORITY 3
-#define LPC122x_GPT_CT32B0_IRQ_PRIORITY 2
-#define LPC122x_GPT_CT32B1_IRQ_PRIORITY 2
-
-/*
- * PWM driver system settings.
- */
-
-/*
- * SERIAL driver system settings.
- */
-#define LPC122x_SERIAL_USE_UART0 TRUE
-#define LPC122x_SERIAL_FIFO_PRELOAD 16
-#define LPC122x_SERIAL_UART0CLKDIV 1
-#define LPC122x_SERIAL_UART0_IRQ_PRIORITY 3
-#define LPC122x_SERIAL_TXD0_SELECTOR TXD0_IS_PIO0_2
-#define LPC122x_SERIAL_RXD0_SELECTOR RXD0_IS_PIO0_1
-
-#define LPC122x_SERIAL_USE_UART1 FALSE
-#define LPC122x_SERIAL_FIFO_PRELOAD 16
-#define LPC122x_SERIAL_UART1CLKDIV 1
-#define LPC122x_SERIAL_UART1_IRQ_PRIORITY 3
-#define LPC122x_SERIAL_RXD1_SELECTOR RXD1_IS_PIO0_8
-#define LPC122x_SERIAL_TXD1_SELECTOR TXD1_IS_PIO0_9
-
-/*
- * SPI driver system settings.
- */
-#define LPC122x_SPI_USE_SSP0 TRUE
-#define LPC122x_SPI_SSP0CLKDIV 1
-#define LPC122x_SPI_SSP0_IRQ_PRIORITY 1
-#define LPC122x_SPI_SSP_ERROR_HOOK(spip) chSysHalt()
diff --git a/testhal/LPC122x/IRQ_STORM/readme.txt b/testhal/LPC122x/IRQ_STORM/readme.txt deleted file mode 100644 index 58f143f05..000000000 --- a/testhal/LPC122x/IRQ_STORM/readme.txt +++ /dev/null @@ -1,25 +0,0 @@ -*****************************************************************************
-** ChibiOS/RT HAL - IRQ-STORM demo for LPC122x. **
-*****************************************************************************
-
-** TARGET **
-
-The demo will on an LPCXpresso LPC1114 board.
-
-** The Demo **
-
-The application demonstrates the use of the LPC11xx GPT, PAL and Serial drivers
-in order to implement a system stress demo.
-
-** Build Procedure **
-
-The demo has been tested using the free LPCXpresso toolchain but also with
-Codesourcery and YAGARTO.
-Just modify the TRGT line in the makefile in order to use different GCC ports.
-
-** Notes **
-
-Some files used by the demo are not part of ChibiOS/RT but are copyright of
-NXP and are licensed under a different license.
-
- http://www.nxp.com
diff --git a/testhal/LPC122x/PWM/Makefile b/testhal/LPC122x/PWM/Makefile deleted file mode 100644 index 16eff2811..000000000 --- a/testhal/LPC122x/PWM/Makefile +++ /dev/null @@ -1,196 +0,0 @@ -##############################################################################
-# Build global options
-# NOTE: Can be overridden externally.
-#
-
-# Compiler options here.
-ifeq ($(USE_OPT),)
- USE_OPT = -O2 -ggdb -fomit-frame-pointer
-endif
-
-# C specific options here (added to USE_OPT).
-ifeq ($(USE_COPT),)
- USE_COPT =
-endif
-
-# C++ specific options here (added to USE_OPT).
-ifeq ($(USE_CPPOPT),)
- USE_CPPOPT = -fno-rtti
-endif
-
-# Enable this if you want the linker to remove unused code and data
-ifeq ($(USE_LINK_GC),)
- USE_LINK_GC = yes
-endif
-
-# If enabled, this option allows to compile the application in THUMB mode.
-ifeq ($(USE_THUMB),)
- USE_THUMB = yes
-endif
-
-# Enable this if you want to see the full log while compiling.
-ifeq ($(USE_VERBOSE_COMPILE),)
- USE_VERBOSE_COMPILE = no
-endif
-
-#
-# Build global options
-##############################################################################
-
-##############################################################################
-# Architecture or project specific options
-#
-
-#
-# Architecture or project specific options
-##############################################################################
-
-##############################################################################
-# Project, sources and paths
-#
-
-# Define project name here
-PROJECT = ch
-
-# Imported source files and paths
-CHIBIOS = ../../..
-include $(CHIBIOS)/boards/OLIMEX_LPC-P1227/board.mk
-include $(CHIBIOS)/os/hal/platforms/LPC122x/platform.mk
-include $(CHIBIOS)/os/hal/hal.mk
-include $(CHIBIOS)/os/ports/GCC/ARMCMx/LPC122x/port.mk
-include $(CHIBIOS)/os/kernel/kernel.mk
-include $(CHIBIOS)/test/test.mk
-
-# Define linker script file here
-LDSCRIPT= $(PORTLD)/LPC1227.ld
-
-# C sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CSRC = $(PORTSRC) \
- $(KERNSRC) \
- $(TESTSRC) \
- $(HALSRC) \
- $(PLATFORMSRC) \
- $(BOARDSRC) \
- $(CHIBIOS)/os/various/evtimer.c \
- $(CHIBIOS)/os/various/syscalls.c \
- main.c
-
-# C++ sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CPPSRC =
-
-# C sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACSRC =
-
-# C++ sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACPPSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCPPSRC =
-
-# List ASM source files here
-ASMSRC = $(PORTASM)
-
-INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC) \
- $(CHIBIOS)/os/various
-
-#
-# Project, sources and paths
-##############################################################################
-
-##############################################################################
-# Compiler settings
-#
-
-MCU = cortex-m0
-
-TRGT = arm-none-eabi-
-CC = $(TRGT)gcc
-CPPC = $(TRGT)g++
-# Enable loading with g++ only if you need C++ runtime support.
-# NOTE: You can use C++ even without C++ support if you are careful. C++
-# runtime support makes code size explode.
-LD = $(TRGT)gcc
-#LD = $(TRGT)g++
-CP = $(TRGT)objcopy
-AS = $(TRGT)gcc -x assembler-with-cpp
-OD = $(TRGT)objdump
-HEX = $(CP) -O ihex
-BIN = $(CP) -O binary
-
-# ARM-specific options here
-AOPT =
-
-# THUMB-specific options here
-TOPT = -mthumb -DTHUMB
-
-# Define C warning options here
-CWARN = -Wall -Wextra -Wstrict-prototypes
-
-# Define C++ warning options here
-CPPWARN = -Wall -Wextra
-
-#
-# Compiler settings
-##############################################################################
-
-##############################################################################
-# Start of default section
-#
-
-# List all default C defines here, like -D_DEBUG=1
-DDEFS = -DLPC1227 -D__NEWLIB__
-
-# List all default ASM defines here, like -D_DEBUG=1
-DADEFS =
-
-# List all default directories to look for include files here
-DINCDIR =
-
-# List the default directory to look for the libraries here
-DLIBDIR =
-
-# List all default libraries here
-DLIBS =
-
-#
-# End of default section
-##############################################################################
-
-##############################################################################
-# Start of user section
-#
-
-# List all user C define here, like -D_DEBUG=1
-UDEFS =
-
-# Define ASM defines here
-UADEFS =
-
-# List all user directories here
-UINCDIR =
-
-# List the user directory to look for the libraries here
-ULIBDIR =
-
-# List all user libraries here
-ULIBS =
-
-#
-# End of user defines
-##############################################################################
-
-include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk
diff --git a/testhal/LPC122x/PWM/chconf.h b/testhal/LPC122x/PWM/chconf.h deleted file mode 100644 index b5126732f..000000000 --- a/testhal/LPC122x/PWM/chconf.h +++ /dev/null @@ -1,532 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
- LPC122x PWM driver - Copyright (C) 2013 Marcin Jokel
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/chconf.h
- * @brief Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- * contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef _CHCONF_H_
-#define _CHCONF_H_
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- * setting also defines the system tick time unit.
- */
-#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__)
-#define CH_FREQUENCY 1000
-#endif
-
-/**
- * @brief Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- * threads before preemption occurs. Setting this value to zero
- * disables the preemption for threads with equal priority and the
- * round robin becomes cooperative. Note that higher priority
- * threads can still preempt, the kernel is always preemptive.
- *
- * @note Disabling the round robin preemption makes the kernel more compact
- * and generally faster.
- */
-#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__)
-#define CH_TIME_QUANTUM 20
-#endif
-
-/**
- * @brief Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- * then the whole available RAM is used. The core memory is made
- * available to the heap allocator and/or can be used directly through
- * the simplified core memory allocator.
- *
- * @note In order to let the OS manage the whole RAM the linker script must
- * provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note Requires @p CH_USE_MEMCORE.
- */
-#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__)
-#define CH_MEMCORE_SIZE 0
-#endif
-
-/**
- * @brief Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread automatically. The application has
- * then the responsibility to do one of the following:
- * - Spawn a custom idle thread at priority @p IDLEPRIO.
- * - Change the main() thread priority to @p IDLEPRIO then enter
- * an endless loop. In this scenario the @p main() thread acts as
- * the idle thread.
- * .
- * @note Unless an idle thread is spawned the @p main() thread must not
- * enter a sleep state.
- */
-#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__)
-#define CH_NO_IDLE_THREAD FALSE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- * is used when two possible implementations exist.
- *
- * @note This is not related to the compiler optimization options.
- * @note The default is @p TRUE.
- */
-#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__)
-#define CH_OPTIMIZE_SPEED TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__)
-#define CH_USE_REGISTRY TRUE
-#endif
-
-/**
- * @brief Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- * the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__)
-#define CH_USE_WAITEXIT TRUE
-#endif
-
-/**
- * @brief Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__)
-#define CH_USE_SEMAPHORES TRUE
-#endif
-
-/**
- * @brief Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- * priority rather than in FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special requirements.
- * @note Requires @p CH_USE_SEMAPHORES.
- */
-#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__)
-#define CH_USE_SEMAPHORES_PRIORITY FALSE
-#endif
-
-/**
- * @brief Atomic semaphore API.
- * @details If enabled then the semaphores the @p chSemSignalWait() API
- * is included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_SEMAPHORES.
- */
-#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__)
-#define CH_USE_SEMSW TRUE
-#endif
-
-/**
- * @brief Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__)
-#define CH_USE_MUTEXES TRUE
-#endif
-
-/**
- * @brief Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_MUTEXES.
- */
-#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__)
-#define CH_USE_CONDVARS TRUE
-#endif
-
-/**
- * @brief Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- * specification are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_CONDVARS.
- */
-#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__)
-#define CH_USE_CONDVARS_TIMEOUT TRUE
-#endif
-
-/**
- * @brief Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__)
-#define CH_USE_EVENTS TRUE
-#endif
-
-/**
- * @brief Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- * are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_EVENTS.
- */
-#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__)
-#define CH_USE_EVENTS_TIMEOUT TRUE
-#endif
-
-/**
- * @brief Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__)
-#define CH_USE_MESSAGES TRUE
-#endif
-
-/**
- * @brief Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- * FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special requirements.
- * @note Requires @p CH_USE_MESSAGES.
- */
-#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__)
-#define CH_USE_MESSAGES_PRIORITY FALSE
-#endif
-
-/**
- * @brief Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- * included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_SEMAPHORES.
- */
-#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__)
-#define CH_USE_MAILBOXES TRUE
-#endif
-
-/**
- * @brief I/O Queues APIs.
- * @details If enabled then the I/O queues APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__)
-#define CH_USE_QUEUES TRUE
-#endif
-
-/**
- * @brief Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__)
-#define CH_USE_MEMCORE TRUE
-#endif
-
-/**
- * @brief Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or
- * @p CH_USE_SEMAPHORES.
- * @note Mutexes are recommended.
- */
-#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__)
-#define CH_USE_HEAP TRUE
-#endif
-
-/**
- * @brief C-runtime allocator.
- * @details If enabled the the heap allocator APIs just wrap the C-runtime
- * @p malloc() and @p free() functions.
- *
- * @note The default is @p FALSE.
- * @note Requires @p CH_USE_HEAP.
- * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the
- * appropriate documentation.
- */
-#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__)
-#define CH_USE_MALLOC_HEAP FALSE
-#endif
-
-/**
- * @brief Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__)
-#define CH_USE_MEMPOOLS TRUE
-#endif
-
-/**
- * @brief Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_WAITEXIT.
- * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS.
- */
-#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__)
-#define CH_USE_DYNAMIC TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- * at runtime.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__)
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
-#endif
-
-/**
- * @brief Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- * parameters are activated.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_CHECKS FALSE
-#endif
-
-/**
- * @brief Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- * activated. This includes consistency checks inside the kernel,
- * runtime anomalies and port-defined checks.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_ASSERTS FALSE
-#endif
-
-/**
- * @brief Debug option, trace buffer.
- * @details If enabled then the context switch circular trace buffer is
- * activated.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_TRACE FALSE
-#endif
-
-/**
- * @brief Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note The default is @p FALSE.
- * @note The stack check is performed in a architecture/port dependent way.
- * It may not be implemented or some ports.
- * @note The default failure mode is to halt the system with the global
- * @p panic_msg variable set to @p NULL.
- */
-#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_STACK_CHECK FALSE
-#endif
-
-/**
- * @brief Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- * value when a thread is created. This can be useful for the
- * runtime measurement of the used stack.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__)
-#define CH_DBG_FILL_THREADS FALSE
-#endif
-
-/**
- * @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p Thread structure that
- * counts the system ticks occurred while executing the thread.
- *
- * @note The default is @p TRUE.
- * @note This debug option is defaulted to TRUE because it is required by
- * some test cases into the test suite.
- */
-#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__)
-#define CH_DBG_THREADS_PROFILING TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Threads descriptor structure extension.
- * @details User fields added to the end of the @p Thread structure.
- */
-#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__)
-#define THREAD_EXT_FIELDS \
- /* Add threads custom fields here.*/
-#endif
-
-/**
- * @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
- *
- * @note It is invoked from within @p chThdInit() and implicitly from all
- * the threads creation APIs.
- */
-#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__)
-#define THREAD_EXT_INIT_HOOK(tp) { \
- /* Add threads initialization code here.*/ \
-}
-#endif
-
-/**
- * @brief Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- *
- * @note It is inserted into lock zone.
- * @note It is also invoked when the threads simply return in order to
- * terminate.
- */
-#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__)
-#define THREAD_EXT_EXIT_HOOK(tp) { \
- /* Add threads finalization code here.*/ \
-}
-#endif
-
-/**
- * @brief Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__)
-#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \
- /* System halt code here.*/ \
-}
-#endif
-
-/**
- * @brief Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__)
-#define IDLE_LOOP_HOOK() { \
- /* Idle loop code here.*/ \
-}
-#endif
-
-/**
- * @brief System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- * after processing the virtual timers queue.
- */
-#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__)
-#define SYSTEM_TICK_EVENT_HOOK() { \
- /* System tick event code here.*/ \
-}
-#endif
-
-/**
- * @brief System halt hook.
- * @details This hook is invoked in case to a system halting error before
- * the system is halted.
- */
-#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
-#define SYSTEM_HALT_HOOK() { \
- /* System halt code here.*/ \
-}
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h). */
-/*===========================================================================*/
-
-#endif /* _CHCONF_H_ */
-
-/** @} */
diff --git a/testhal/LPC122x/PWM/halconf.h b/testhal/LPC122x/PWM/halconf.h deleted file mode 100644 index 945da9669..000000000 --- a/testhal/LPC122x/PWM/halconf.h +++ /dev/null @@ -1,313 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
- LPC122x PWM driver - Copyright (C) 2013 Marcin Jokel
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/halconf.h
- * @brief HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- * various device drivers from your application. You may also use
- * this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef _HALCONF_H_
-#define _HALCONF_H_
-
-#include "mcuconf.h"
-
-/**
- * @brief Enables the TM subsystem.
- */
-#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
-#define HAL_USE_TM FALSE
-#endif
-
-/**
- * @brief Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
-#endif
-
-/**
- * @brief Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
-#endif
-
-/**
- * @brief Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
-#endif
-
-/**
- * @brief Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT FALSE
-#endif
-
-/**
- * @brief Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT FALSE
-#endif
-
-/**
- * @brief Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C FALSE
-#endif
-
-/**
- * @brief Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
-#endif
-
-/**
- * @brief Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC FALSE
-#endif
-
-/**
- * @brief Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI FALSE
-#endif
-
-/**
- * @brief Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM TRUE
-#endif
-
-/**
- * @brief Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC FALSE
-#endif
-
-/**
- * @brief Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL TRUE
-#endif
-
-/**
- * @brief Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB FALSE
-#endif
-
-/**
- * @brief Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI FALSE
-#endif
-
-/**
- * @brief Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
-#endif
-
-/**
- * @brief Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY FALSE
-#endif
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- * This option is recommended also if the SPI driver does not
- * use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Number of initialization attempts before rejecting the card.
- * @note Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY 100
-#endif
-
-/**
- * @brief Include support for MMC cards.
- * @note MMC support is not yet implemented so this option must be kept
- * at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT FALSE
-#endif
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- * default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE 38400
-#endif
-
-/**
- * @brief Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- * buffers depending on the requirements of your application.
- * @note The default is 64 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 16
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-#endif /* _HALCONF_H_ */
-
-/** @} */
diff --git a/testhal/LPC122x/PWM/main.c b/testhal/LPC122x/PWM/main.c deleted file mode 100644 index eb8abb951..000000000 --- a/testhal/LPC122x/PWM/main.c +++ /dev/null @@ -1,96 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
- LPC122x PWM driver - Copyright (C) 2013 Marcin Jokel
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-static void pwm2pcb(PWMDriver *pwmp) {
-
- (void)pwmp;
- palSetPad(GPIO1, GPIO1_LED2);
-}
-
-static void pwm2c0cb(PWMDriver *pwmp) {
-
- (void)pwmp;
- palClearPad(GPIO1, GPIO1_LED2);
-}
-
-static PWMConfig pwmcfg = {
- 10000, /* 100kHz PWM clock frequency. */
- 1000, /* PWM 10 Hz */
- pwm2pcb,
- {
- {PWM_OUTPUT_ACTIVE_LOW, pwm2c0cb},
- {PWM_OUTPUT_ACTIVE_LOW, NULL}
- }
-};
-
-/*
- * Application entry point.
- */
-int main(void) {
-
- /*
- * System initializations.
- * - HAL initialization, this also initializes the configured device drivers
- * and performs the board-specific initializations.
- * - Kernel initialization, the main() function becomes a thread and the
- * RTOS is active.
- */
- halInit();
- chSysInit();
-
- /*
- * Initializes the PWM driver 2.
- */
- pwmStart(&PWMD2, &pwmcfg);
- chThdSleepMilliseconds(2000);
-
- /*
- * Starts the PWM channel 1 using 75% duty cycle.
- */
- pwmEnableChannel(&PWMD2, 0, 250);
- chThdSleepMilliseconds(5000);
-
- /*
- * Changes the PWM channel 1 to 50% duty cycle.
- */
- pwmEnableChannel(&PWMD2, 0, 500);
- chThdSleepMilliseconds(5000);
-
- /*
- * Changes the PWM channel 0 to 75% duty cycle.
- */
- pwmEnableChannel(&PWMD2, 0, 250);
- chThdSleepMilliseconds(5000);
-
- /*
- * Changes PWM period to half second the duty cycle becomes 50%
- * implicitly.
- */
- pwmChangePeriod(&PWMD2, 500);
- chThdSleepMilliseconds(5000);
-
- /*
- * Normal main() thread activity, in this demo it does nothing.
- */
- while (TRUE) {
- chThdSleepMilliseconds(500);
- }
- return 0;
-}
diff --git a/testhal/LPC122x/PWM/mcuconf.h b/testhal/LPC122x/PWM/mcuconf.h deleted file mode 100644 index b4a308c7a..000000000 --- a/testhal/LPC122x/PWM/mcuconf.h +++ /dev/null @@ -1,124 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
- LPC122x PWM driver - Copyright (C) 2013 Marcin Jokel
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/*
- * LPC1227 drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the driver
- * is enabled in halconf.h.
- *
- * IRQ priorities:
- * 3...0 Lowest...highest.
- */
-
-/*
- * HAL driver system settings.
- */
-#define LPC122x_PLLCLK_SOURCE SYSPLLCLKSEL_SYSOSC
-#define LPC122x_SYSPLL_MUL 3
-#define LPC122x_SYSPLL_DIV 8
-#define LPC122x_MAINCLK_SOURCE SYSMAINCLKSEL_PLLOUT
-#define LPC122x_SYSABHCLK_DIV 1
-
-/*
- * GPT driver system settings.
- */
-#define LPC122x_GPT_USE_CT16B0 TRUE
-#define LPC122x_GPT_USE_CT16B1 TRUE
-#define LPC122x_GPT_USE_CT32B0 TRUE
-#define LPC122x_GPT_USE_CT32B1 TRUE
-#define LPC122x_GPT_CT16B0_IRQ_PRIORITY 2
-#define LPC122x_GPT_CT16B1_IRQ_PRIORITY 2
-#define LPC122x_GPT_CT32B0_IRQ_PRIORITY 2
-#define LPC122x_GPT_CT32B1_IRQ_PRIORITY 2
-
-/*
- * SERIAL driver system settings.
- */
-#define LPC122x_SERIAL_USE_UART0 TRUE
-#define LPC122x_SERIAL_FIFO_PRELOAD 16
-#define LPC122x_SERIAL_UART0CLKDIV 1
-#define LPC122x_SERIAL_UART0_IRQ_PRIORITY 3
-#define LPC122x_SERIAL_TXD0_SELECTOR TXD0_IS_PIO0_2
-#define LPC122x_SERIAL_RXD0_SELECTOR RXD0_IS_PIO0_1
-
-#define LPC122x_SERIAL_USE_UART1 FALSE
-#define LPC122x_SERIAL_FIFO_PRELOAD 16
-#define LPC122x_SERIAL_UART1CLKDIV 1
-#define LPC122x_SERIAL_UART1_IRQ_PRIORITY 3
-#define LPC122x_SERIAL_RXD1_SELECTOR RXD1_IS_PIO0_8
-#define LPC122x_SERIAL_TXD1_SELECTOR TXD1_IS_PIO0_9
-
-/*
- * SPI driver system settings.
- */
-#define LPC122x_SPI_USE_SSP0 TRUE
-#define LPC122x_SPI_SSP0CLKDIV 1
-#define LPC122x_SPI_SSP0_IRQ_PRIORITY 1
-#define LPC122x_SPI_SSP_ERROR_HOOK(spip) chSysHalt()
-
-/*
- * EXT driver system settings.
- */
-#define LPC122x_EXT_USE_EXT0 FALSE
-#define LPC122x_EXT_USE_EXT1 FALSE
-#define LPC122x_EXT_USE_EXT2 TRUE
-#define LPC122x_EXT_EXTI0_IRQ_PRIORITY 3
-#define LPC122x_EXT_EXTI1_IRQ_PRIORITY 3
-#define LPC122x_EXT_EXTI2_IRQ_PRIORITY 3
-
-/*
- * RTC driver system settings.
- */
-#define LPC122x_RTCCLK SYSCFG_RTCCLK_1Hz
-#define LPC122x_RTC_CLKDIV 0
-#define LPC122x_RTC_USE_ALARM TRUE
-#define LPC122x_RTC_IRQ_PRIORITY 3
-
-/*
- * PWM driver system settings.
- */
-#define LPC122x_PWM_USE_CT16B0 FALSE
-#define LPC122x_PWM_USE_CT16B1 TRUE
-#define LPC122x_PWM_USE_CT32B0 FALSE
-#define LPC122x_PWM_USE_CT32B1 FALSE
-#define LPC122x_PWM_USE_CT16B0_CH0 FALSE
-#define LPC122x_PWM_USE_CT16B0_CH1 FALSE
-#define LPC122x_PWM_USE_CT16B1_CH0 TRUE
-#define LPC122x_PWM_USE_CT16B1_CH1 TRUE
-#define LPC122x_PWM_USE_CT32B0_CH0 FALSE
-#define LPC122x_PWM_USE_CT32B0_CH1 FALSE
-#define LPC122x_PWM_USE_CT32B1_CH0 FALSE
-#define LPC122x_PWM_USE_CT32B1_CH1 FALSE
-#define LPC122x_PWM_CT16B0_IRQ_PRIORITY 3
-#define LPC122x_PWM_CT16B1_IRQ_PRIORITY 3
-#define LPC122x_PWM_CT32B0_IRQ_PRIORITY 3
-#define LPC122x_PWM_CT32B1_IRQ_PRIORITY 3
-#define LPC122x_PWM_CT16B0_CH0_SELECTOR PWM_CT16B0_CH0_IS_PIO0_28
-#define LPC122x_PWM_CT16B0_CH1_SELECTOR PWM_CT16B0_CH1_IS_PIO0_29
-#define LPC122x_PWM_CT16B1_CH0_SELECTOR PWM_CT16B1_CH0_IS_PIO2_2
-#define LPC122x_PWM_CT16B1_CH1_SELECTOR PWM_CT16B1_CH1_IS_PIO1_6
-#define LPC122x_PWM_CT32B0_CH0_SELECTOR PWM_CT32B0_CH0_IS_PIO2_4
-#define LPC122x_PWM_CT32B0_CH1_SELECTOR PWM_CT32B0_CH1_IS_PIO0_2
-#define LPC122x_PWM_CT32B1_CH0_SELECTOR PWM_CT32B1_CH0_IS_PIO0_6
-#define LPC122x_PWM_CT32B1_CH1_SELECTOR PWM_CT32B1_CH1_IS_PIO0_7
-
-/*
- * I2C driver system settings.
- */
-#define LPC122x_I2C_IRQ_PRIORITY 3
diff --git a/testhal/LPC122x/RTC/Makefile b/testhal/LPC122x/RTC/Makefile deleted file mode 100644 index 7b0b90b17..000000000 --- a/testhal/LPC122x/RTC/Makefile +++ /dev/null @@ -1,199 +0,0 @@ -##############################################################################
-# Build global options
-# NOTE: Can be overridden externally.
-#
-
-# Compiler options here.
-ifeq ($(USE_OPT),)
- USE_OPT = -O2 -ggdb -fomit-frame-pointer
-endif
-
-# C specific options here (added to USE_OPT).
-ifeq ($(USE_COPT),)
- USE_COPT =
-endif
-
-# C++ specific options here (added to USE_OPT).
-ifeq ($(USE_CPPOPT),)
- USE_CPPOPT = -fno-rtti
-endif
-
-# Enable this if you want the linker to remove unused code and data
-ifeq ($(USE_LINK_GC),)
- USE_LINK_GC = yes
-endif
-
-# If enabled, this option allows to compile the application in THUMB mode.
-ifeq ($(USE_THUMB),)
- USE_THUMB = yes
-endif
-
-# Enable this if you want to see the full log while compiling.
-ifeq ($(USE_VERBOSE_COMPILE),)
- USE_VERBOSE_COMPILE = no
-endif
-
-#
-# Build global options
-##############################################################################
-
-##############################################################################
-# Architecture or project specific options
-#
-
-#
-# Architecture or project specific options
-##############################################################################
-
-##############################################################################
-# Project, sources and paths
-#
-
-# Define project name here
-PROJECT = ch
-
-# Imported source files and paths
-CHIBIOS = ../../..
-include $(CHIBIOS)/boards/OLIMEX_LPC-P1227/board.mk
-include $(CHIBIOS)/os/hal/platforms/LPC122x/platform.mk
-include $(CHIBIOS)/os/hal/hal.mk
-include $(CHIBIOS)/os/ports/GCC/ARMCMx/LPC122x/port.mk
-include $(CHIBIOS)/os/kernel/kernel.mk
-include $(CHIBIOS)/test/test.mk
-
-# Define linker script file here
-LDSCRIPT= $(PORTLD)/LPC1227.ld
-
-# C sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CSRC = $(PORTSRC) \
- $(KERNSRC) \
- $(TESTSRC) \
- $(HALSRC) \
- $(PLATFORMSRC) \
- $(BOARDSRC) \
- $(CHIBIOS)/os/various/evtimer.c \
- $(CHIBIOS)/os/various/syscalls.c \
- $(CHIBIOS)/os/various/shell.c \
- $(CHIBIOS)/os/various/chprintf.c \
- $(CHIBIOS)/os/various/chrtclib.c \
- main.c
-
-# C++ sources that can be compiled in ARM or THUMB mode depending on the global
-# setting.
-CPPSRC =
-
-# C sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACSRC =
-
-# C++ sources to be compiled in ARM mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-ACPPSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCSRC =
-
-# C sources to be compiled in THUMB mode regardless of the global setting.
-# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
-# option that results in lower performance and larger code size.
-TCPPSRC =
-
-# List ASM source files here
-ASMSRC = $(PORTASM)
-
-INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC) \
- $(CHIBIOS)/os/various
-
-#
-# Project, sources and paths
-##############################################################################
-
-##############################################################################
-# Compiler settings
-#
-
-MCU = cortex-m0
-
-TRGT = arm-none-eabi-
-CC = $(TRGT)gcc
-CPPC = $(TRGT)g++
-# Enable loading with g++ only if you need C++ runtime support.
-# NOTE: You can use C++ even without C++ support if you are careful. C++
-# runtime support makes code size explode.
-LD = $(TRGT)gcc
-#LD = $(TRGT)g++
-CP = $(TRGT)objcopy
-AS = $(TRGT)gcc -x assembler-with-cpp
-OD = $(TRGT)objdump
-HEX = $(CP) -O ihex
-BIN = $(CP) -O binary
-
-# ARM-specific options here
-AOPT =
-
-# THUMB-specific options here
-TOPT = -mthumb -DTHUMB
-
-# Define C warning options here
-CWARN = -Wall -Wextra -Wstrict-prototypes
-
-# Define C++ warning options here
-CPPWARN = -Wall -Wextra
-
-#
-# Compiler settings
-##############################################################################
-
-##############################################################################
-# Start of default section
-#
-
-# List all default C defines here, like -D_DEBUG=1
-DDEFS = -DLPC122X -D__NEWLIB__
-
-# List all default ASM defines here, like -D_DEBUG=1
-DADEFS =
-
-# List all default directories to look for include files here
-DINCDIR =
-
-# List the default directory to look for the libraries here
-DLIBDIR =
-
-# List all default libraries here
-DLIBS =
-
-#
-# End of default section
-##############################################################################
-
-##############################################################################
-# Start of user section
-#
-
-# List all user C define here, like -D_DEBUG=1
-UDEFS =
-
-# Define ASM defines here
-UADEFS =
-
-# List all user directories here
-UINCDIR =
-
-# List the user directory to look for the libraries here
-ULIBDIR =
-
-# List all user libraries here
-ULIBS =
-
-#
-# End of user defines
-##############################################################################
-
-include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk
diff --git a/testhal/LPC122x/RTC/chconf.h b/testhal/LPC122x/RTC/chconf.h deleted file mode 100644 index 120d2b7d5..000000000 --- a/testhal/LPC122x/RTC/chconf.h +++ /dev/null @@ -1,532 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
- LPC122x RTC driver - Copyright (C) 2013 Marcin Jokel
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/chconf.h
- * @brief Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- * contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef _CHCONF_H_
-#define _CHCONF_H_
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- * setting also defines the system tick time unit.
- */
-#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__)
-#define CH_FREQUENCY 1000
-#endif
-
-/**
- * @brief Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- * threads before preemption occurs. Setting this value to zero
- * disables the preemption for threads with equal priority and the
- * round robin becomes cooperative. Note that higher priority
- * threads can still preempt, the kernel is always preemptive.
- *
- * @note Disabling the round robin preemption makes the kernel more compact
- * and generally faster.
- */
-#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__)
-#define CH_TIME_QUANTUM 20
-#endif
-
-/**
- * @brief Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- * then the whole available RAM is used. The core memory is made
- * available to the heap allocator and/or can be used directly through
- * the simplified core memory allocator.
- *
- * @note In order to let the OS manage the whole RAM the linker script must
- * provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note Requires @p CH_USE_MEMCORE.
- */
-#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__)
-#define CH_MEMCORE_SIZE 0
-#endif
-
-/**
- * @brief Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread automatically. The application has
- * then the responsibility to do one of the following:
- * - Spawn a custom idle thread at priority @p IDLEPRIO.
- * - Change the main() thread priority to @p IDLEPRIO then enter
- * an endless loop. In this scenario the @p main() thread acts as
- * the idle thread.
- * .
- * @note Unless an idle thread is spawned the @p main() thread must not
- * enter a sleep state.
- */
-#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__)
-#define CH_NO_IDLE_THREAD FALSE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- * is used when two possible implementations exist.
- *
- * @note This is not related to the compiler optimization options.
- * @note The default is @p TRUE.
- */
-#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__)
-#define CH_OPTIMIZE_SPEED TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__)
-#define CH_USE_REGISTRY TRUE
-#endif
-
-/**
- * @brief Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- * the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__)
-#define CH_USE_WAITEXIT TRUE
-#endif
-
-/**
- * @brief Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__)
-#define CH_USE_SEMAPHORES TRUE
-#endif
-
-/**
- * @brief Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- * priority rather than in FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special requirements.
- * @note Requires @p CH_USE_SEMAPHORES.
- */
-#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__)
-#define CH_USE_SEMAPHORES_PRIORITY FALSE
-#endif
-
-/**
- * @brief Atomic semaphore API.
- * @details If enabled then the semaphores the @p chSemSignalWait() API
- * is included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_SEMAPHORES.
- */
-#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__)
-#define CH_USE_SEMSW TRUE
-#endif
-
-/**
- * @brief Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__)
-#define CH_USE_MUTEXES TRUE
-#endif
-
-/**
- * @brief Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_MUTEXES.
- */
-#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__)
-#define CH_USE_CONDVARS TRUE
-#endif
-
-/**
- * @brief Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- * specification are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_CONDVARS.
- */
-#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__)
-#define CH_USE_CONDVARS_TIMEOUT TRUE
-#endif
-
-/**
- * @brief Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__)
-#define CH_USE_EVENTS TRUE
-#endif
-
-/**
- * @brief Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- * are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_EVENTS.
- */
-#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__)
-#define CH_USE_EVENTS_TIMEOUT TRUE
-#endif
-
-/**
- * @brief Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__)
-#define CH_USE_MESSAGES TRUE
-#endif
-
-/**
- * @brief Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- * FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special requirements.
- * @note Requires @p CH_USE_MESSAGES.
- */
-#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__)
-#define CH_USE_MESSAGES_PRIORITY FALSE
-#endif
-
-/**
- * @brief Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- * included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_SEMAPHORES.
- */
-#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__)
-#define CH_USE_MAILBOXES TRUE
-#endif
-
-/**
- * @brief I/O Queues APIs.
- * @details If enabled then the I/O queues APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__)
-#define CH_USE_QUEUES TRUE
-#endif
-
-/**
- * @brief Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__)
-#define CH_USE_MEMCORE TRUE
-#endif
-
-/**
- * @brief Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or
- * @p CH_USE_SEMAPHORES.
- * @note Mutexes are recommended.
- */
-#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__)
-#define CH_USE_HEAP TRUE
-#endif
-
-/**
- * @brief C-runtime allocator.
- * @details If enabled the the heap allocator APIs just wrap the C-runtime
- * @p malloc() and @p free() functions.
- *
- * @note The default is @p FALSE.
- * @note Requires @p CH_USE_HEAP.
- * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the
- * appropriate documentation.
- */
-#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__)
-#define CH_USE_MALLOC_HEAP FALSE
-#endif
-
-/**
- * @brief Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__)
-#define CH_USE_MEMPOOLS TRUE
-#endif
-
-/**
- * @brief Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_WAITEXIT.
- * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS.
- */
-#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__)
-#define CH_USE_DYNAMIC TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- * at runtime.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__)
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
-#endif
-
-/**
- * @brief Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- * parameters are activated.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_CHECKS FALSE
-#endif
-
-/**
- * @brief Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- * activated. This includes consistency checks inside the kernel,
- * runtime anomalies and port-defined checks.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_ASSERTS FALSE
-#endif
-
-/**
- * @brief Debug option, trace buffer.
- * @details If enabled then the context switch circular trace buffer is
- * activated.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_TRACE FALSE
-#endif
-
-/**
- * @brief Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note The default is @p FALSE.
- * @note The stack check is performed in a architecture/port dependent way.
- * It may not be implemented or some ports.
- * @note The default failure mode is to halt the system with the global
- * @p panic_msg variable set to @p NULL.
- */
-#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_STACK_CHECK FALSE
-#endif
-
-/**
- * @brief Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- * value when a thread is created. This can be useful for the
- * runtime measurement of the used stack.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__)
-#define CH_DBG_FILL_THREADS FALSE
-#endif
-
-/**
- * @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p Thread structure that
- * counts the system ticks occurred while executing the thread.
- *
- * @note The default is @p TRUE.
- * @note This debug option is defaulted to TRUE because it is required by
- * some test cases into the test suite.
- */
-#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__)
-#define CH_DBG_THREADS_PROFILING TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Threads descriptor structure extension.
- * @details User fields added to the end of the @p Thread structure.
- */
-#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__)
-#define THREAD_EXT_FIELDS \
- /* Add threads custom fields here.*/
-#endif
-
-/**
- * @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
- *
- * @note It is invoked from within @p chThdInit() and implicitly from all
- * the threads creation APIs.
- */
-#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__)
-#define THREAD_EXT_INIT_HOOK(tp) { \
- /* Add threads initialization code here.*/ \
-}
-#endif
-
-/**
- * @brief Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- *
- * @note It is inserted into lock zone.
- * @note It is also invoked when the threads simply return in order to
- * terminate.
- */
-#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__)
-#define THREAD_EXT_EXIT_HOOK(tp) { \
- /* Add threads finalization code here.*/ \
-}
-#endif
-
-/**
- * @brief Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__)
-#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \
- /* System halt code here.*/ \
-}
-#endif
-
-/**
- * @brief Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__)
-#define IDLE_LOOP_HOOK() { \
- /* Idle loop code here.*/ \
-}
-#endif
-
-/**
- * @brief System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- * after processing the virtual timers queue.
- */
-#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__)
-#define SYSTEM_TICK_EVENT_HOOK() { \
- /* System tick event code here.*/ \
-}
-#endif
-
-/**
- * @brief System halt hook.
- * @details This hook is invoked in case to a system halting error before
- * the system is halted.
- */
-#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
-#define SYSTEM_HALT_HOOK() { \
- /* System halt code here.*/ \
-}
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h). */
-/*===========================================================================*/
-
-#endif /* _CHCONF_H_ */
-
-/** @} */
diff --git a/testhal/LPC122x/RTC/halconf.h b/testhal/LPC122x/RTC/halconf.h deleted file mode 100644 index b9195a6dc..000000000 --- a/testhal/LPC122x/RTC/halconf.h +++ /dev/null @@ -1,313 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
- LPC122x RTC driver - Copyright (C) 2013 Marcin Jokel
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/halconf.h
- * @brief HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- * various device drivers from your application. You may also use
- * this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef _HALCONF_H_
-#define _HALCONF_H_
-
-#include "mcuconf.h"
-
-/**
- * @brief Enables the TM subsystem.
- */
-#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
-#define HAL_USE_TM FALSE
-#endif
-
-/**
- * @brief Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
-#endif
-
-/**
- * @brief Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
-#endif
-
-/**
- * @brief Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
-#endif
-
-/**
- * @brief Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT FALSE
-#endif
-
-/**
- * @brief Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT TRUE
-#endif
-
-/**
- * @brief Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C FALSE
-#endif
-
-/**
- * @brief Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
-#endif
-
-/**
- * @brief Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC FALSE
-#endif
-
-/**
- * @brief Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI FALSE
-#endif
-
-/**
- * @brief Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM FALSE
-#endif
-
-/**
- * @brief Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC TRUE
-#endif
-
-/**
- * @brief Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL TRUE
-#endif
-
-/**
- * @brief Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB FALSE
-#endif
-
-/**
- * @brief Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI FALSE
-#endif
-
-/**
- * @brief Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
-#endif
-
-/**
- * @brief Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY FALSE
-#endif
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- * This option is recommended also if the SPI driver does not
- * use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Number of initialization attempts before rejecting the card.
- * @note Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY 100
-#endif
-
-/**
- * @brief Include support for MMC cards.
- * @note MMC support is not yet implemented so this option must be kept
- * at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT FALSE
-#endif
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- * default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE 38400
-#endif
-
-/**
- * @brief Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- * buffers depending on the requirements of your application.
- * @note The default is 64 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 16
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-#endif /* _HALCONF_H_ */
-
-/** @} */
diff --git a/testhal/LPC122x/RTC/main.c b/testhal/LPC122x/RTC/main.c deleted file mode 100644 index c9cf9dab0..000000000 --- a/testhal/LPC122x/RTC/main.c +++ /dev/null @@ -1,286 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
- LPC122x RTC driver - Copyright (C) 2013 Marcin Jokel
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/*
-This structure is used to hold the values representing a calendar time.
-It contains the following members, with the meanings as shown.
-
-int tm_sec seconds after minute [0-61] (61 allows for 2 leap-seconds)
-int tm_min minutes after hour [0-59]
-int tm_hour hours after midnight [0-23]
-int tm_mday day of the month [1-31]
-int tm_mon month of year [0-11]
-int tm_year current year-1900
-int tm_wday days since Sunday [0-6]
-int tm_yday days since January 1st [0-365]
-int tm_isdst daylight savings indicator (1 = yes, 0 = no, -1 = unknown)
-*/
-
-#include <string.h>
-#include <stdlib.h>
-#include <time.h>
-
-#include "ch.h"
-#include "hal.h"
-
-#include "shell.h"
-#include "chprintf.h"
-#include "chrtclib.h"
-
-static RTCAlarm alarmspec;
-static time_t unix_time;
-
-/* libc stub */
-int _getpid(void) {return 1;}
-/* libc stub */
-void _exit(int i) {(void)i;}
-/* libc stub */
-#include <errno.h>
-#undef errno
-extern int errno;
-int _kill(int pid, int sig) {
- (void)pid;
- (void)sig;
- errno = EINVAL;
- return -1;
-}
-
-
-/* sleep indicator thread */
-static WORKING_AREA(blinkWA, 128);
-static msg_t blink_thd(void *arg){
- (void)arg;
- while (TRUE) {
- chThdSleepMilliseconds(100);
- palTogglePad(GPIO1, GPIO1_LED1);
- }
- return 0;
-}
-
-static void wakeup_cb(RTCDriver *rtcp, rtcevent_t event) {
-
- (void)rtcp;
-
- if (event == RTC_EVENT_ALARM) {
- palTogglePad(GPIO1, GPIO1_LED2);
- }
-}
-
-/* Wake-up from Deep-sleep mode with rtc alarm (must be set first) */
-static void func_sleep(void) {
-
- chSysLock();
-
- /* Deep sleep-mode configuration */
- LPC_PMU->PCON = 0; /* DPDEN bit set to 0 */
- LPC_SYSCON->PDSLEEPCFG = 0x0000FFBF; /* BOD off, wdt osc on */
- LPC_SYSCON->PDAWAKECFG &= ~(1 << 6); /* WDT osc powered after woke */
- SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk; /* Deep sleep mode */
-
- /* WDT osc config and run */
- LPC_SYSCON->PDRUNCFG |= (1 << 6); /* WDT oscillator power-down */
- LPC_SYSCON->WDTOSCCTRL = (0x01 << 5 ) | 0; /* wdt_osc_clk = Fclkana/(2 * (1 + DIVSEL)) */
- LPC_SYSCON->PDRUNCFG &= ~(1 << 6); /* WDT oscillator power-up */
- __NOP();
-
- /* Set WDT osc as Main Clock*/
- LPC_SYSCON->MAINCLKSEL = SYSMAINCLKSEL_WDGOSC;
- LPC_SYSCON->MAINCLKUEN = 1; /* Really required? */
- LPC_SYSCON->MAINCLKUEN = 0;
- LPC_SYSCON->MAINCLKUEN = 1;
- while ((LPC_SYSCON->MAINCLKUEN & 1) == 0) /* Wait switch completion. */
- ;
-
- /* Set RTC start logic */
- LPC_SYSCON->STARTAPRP1 = (1UL << 18); /* Rising edge */
- LPC_SYSCON->STARTERP1 = (1UL << 18); /* Enable Start Logic for RTC interrupt */
-
- __WFI();
-
- NVIC_SystemReset();
-}
-
-/* Wake-up from Deep power-down with wake-up pin or rtc alarm (must be set first) */
-static void func_pwrdown(void) {
-
- chSysLock();
-
- LPC_PMU->PCON |= (1UL << 1); /* DPDEN bit set to 1. */
- SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk; /* Deep sleep mode. */
- LPC_SYSCON->PDRUNCFG &= ~((1UL << 1) | 1UL); /* IRC osc powered. */
-
- __WFI();
-}
-
-static void cmd_pwrdown(BaseSequentialStream *chp, int argc, char *argv[]){
- (void)argv;
-
- if (argc > 0) {
- chprintf(chp, "Usage: pwrdown\r\n");
- return;
- }
- chprintf(chp, "Going to power down.\r\n");
-
- chThdSleepMilliseconds(200);
-
- func_pwrdown();
-
-}
-
-static void cmd_sleep(BaseSequentialStream *chp, int argc, char *argv[]){
- (void)argv;
- if (argc > 0) {
- chprintf(chp, "Usage: sleep\r\n");
- return;
- }
- chprintf(chp, "Going to sleep.\r\n");
-
- chThdSleepMilliseconds(200);
-
- /* going to anabiosis */
- func_sleep();
-}
-
-/*
- *
- */
-static void cmd_alarm(BaseSequentialStream *chp, int argc, char *argv[]){
-
- (void)argv;
- if (argc < 1) {
- goto ERROR;
- }
-
- if ((argc == 1) && (strcmp(argv[0], "get") == 0)){
- rtcGetAlarm(&RTCD1, 0, &alarmspec);
- chprintf(chp, "%D%s",alarmspec.tv_sec," - alarm in seconds\r\n");
- return;
- }
-
- if ((argc == 2) && (strcmp(argv[0], "set") == 0)){
- alarmspec.tv_sec = (uint32_t)atol(argv[1]);
- rtcSetAlarm(&RTCD1, 0, &alarmspec);
- rtcSetCallback(&RTCD1, wakeup_cb);
- return;
- }
- else{
- goto ERROR;
- }
-
-ERROR:
- chprintf(chp, "Usage: alarm get\r\n");
- chprintf(chp, " alarm set N\r\n");
- chprintf(chp, "where N is alarm time in seconds\r\n");
-}
-
-/*
- *
- */
-static void cmd_date(BaseSequentialStream *chp, int argc, char *argv[]){
- (void)argv;
- struct tm timp;
-
- if (argc == 0) {
- goto ERROR;
- }
-
- if ((argc == 1) && (strcmp(argv[0], "get") == 0)){
- unix_time = rtcGetTimeUnixSec(&RTCD1);
-
- if (unix_time == -1){
- chprintf(chp, "incorrect time in RTC cell\r\n");
- }
- else{
- chprintf(chp, "%D%s",unix_time," - unix time\r\n");
- rtcGetTimeTm(&RTCD1, &timp);
- chprintf(chp, "%s%s",asctime(&timp)," - formatted time string\r\n");
- }
- return;
- }
-
- if ((argc == 2) && (strcmp(argv[0], "set") == 0)){
- unix_time = atol(argv[1]);
- if (unix_time > 0){
- rtcSetTimeUnixSec(&RTCD1, unix_time);
- return;
- }
- else{
- goto ERROR;
- }
- }
- else{
- goto ERROR;
- }
-
-ERROR:
- chprintf(chp, "Usage: date get\r\n");
- chprintf(chp, " date set N\r\n");
- chprintf(chp, "where N is time in seconds sins Unix epoch\r\n");
- chprintf(chp, "you can get current N value from unix console by the command\r\n");
- chprintf(chp, "%s", "date +\%s\r\n");
- return;
-}
-
-static const ShellCommand commands[] = {
- {"alarm", cmd_alarm},
- {"date", cmd_date},
- {"sleep", cmd_sleep},
- {"pwrdown", cmd_pwrdown},
- {NULL, NULL}
-};
-
-static const ShellConfig shell_cfg1 = {
- (BaseSequentialStream *)&SD1,
- commands
-};
-
-BaseSequentialStream * chp1 = (BaseSequentialStream *)&SD1;
-
-/**
- * Main function.
- */
-int main(void){
-
- halInit();
- chSysInit();
- chThdCreateStatic(blinkWA, sizeof(blinkWA), NORMALPRIO, blink_thd, NULL);
-
- sdStart(&SD1, NULL); /* Default is 38400-8-N-1.*/
-
- if (LPC_PMU->PCON & (1UL << 11)) {
- chprintf(chp1, "Woke from Deep power-down\r\n");
- LPC_PMU->PCON |= (1 << 11);
- }
-
- if (LPC_PMU->PCON & (1UL << 8)) {
- chprintf(chp1, "Woke from Deep-sleep mode\r\n");
- LPC_PMU->PCON |= (1 << 8);
- }
-
- /* Shell initialization.*/
- shellInit();
- static WORKING_AREA(waShell, 1024);
- shellCreateStatic(&shell_cfg1, waShell, sizeof(waShell), NORMALPRIO);
-
- /* wait until user do not want to test wakeup */
- while (TRUE){
- chThdSleepMilliseconds(200);
- }
- return 0;
-}
-
-
diff --git a/testhal/LPC122x/RTC/mcuconf.h b/testhal/LPC122x/RTC/mcuconf.h deleted file mode 100644 index 16519cb51..000000000 --- a/testhal/LPC122x/RTC/mcuconf.h +++ /dev/null @@ -1,124 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
- LPC122x RTC driver - Copyright (C) 2013 Marcin Jokel
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/*
- * LPC1227 drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the driver
- * is enabled in halconf.h.
- *
- * IRQ priorities:
- * 3...0 Lowest...highest.
- */
-
-/*
- * HAL driver system settings.
- */
-#define LPC122x_PLLCLK_SOURCE SYSPLLCLKSEL_SYSOSC
-#define LPC122x_SYSPLL_MUL 3
-#define LPC122x_SYSPLL_DIV 8
-#define LPC122x_MAINCLK_SOURCE SYSMAINCLKSEL_PLLOUT
-#define LPC122x_SYSABHCLK_DIV 1
-
-/*
- * GPT driver system settings.
- */
-#define LPC122x_GPT_USE_CT16B0 TRUE
-#define LPC122x_GPT_USE_CT16B1 TRUE
-#define LPC122x_GPT_USE_CT32B0 TRUE
-#define LPC122x_GPT_USE_CT32B1 TRUE
-#define LPC122x_GPT_CT16B0_IRQ_PRIORITY 1
-#define LPC122x_GPT_CT16B1_IRQ_PRIORITY 3
-#define LPC122x_GPT_CT32B0_IRQ_PRIORITY 2
-#define LPC122x_GPT_CT32B1_IRQ_PRIORITY 2
-
-/*
- * SERIAL driver system settings.
- */
-#define LPC122x_SERIAL_USE_UART0 TRUE
-#define LPC122x_SERIAL_FIFO_PRELOAD 16
-#define LPC122x_SERIAL_UART0CLKDIV 1
-#define LPC122x_SERIAL_UART0_IRQ_PRIORITY 3
-#define LPC122x_SERIAL_TXD0_SELECTOR TXD0_IS_PIO0_2
-#define LPC122x_SERIAL_RXD0_SELECTOR RXD0_IS_PIO0_1
-
-#define LPC122x_SERIAL_USE_UART1 FALSE
-#define LPC122x_SERIAL_FIFO_PRELOAD 16
-#define LPC122x_SERIAL_UART1CLKDIV 1
-#define LPC122x_SERIAL_UART1_IRQ_PRIORITY 3
-#define LPC122x_SERIAL_RXD1_SELECTOR RXD1_IS_PIO0_8
-#define LPC122x_SERIAL_TXD1_SELECTOR TXD1_IS_PIO0_9
-
-/*
- * SPI driver system settings.
- */
-#define LPC122x_SPI_USE_SSP0 TRUE
-#define LPC122x_SPI_SSP0CLKDIV 1
-#define LPC122x_SPI_SSP0_IRQ_PRIORITY 1
-#define LPC122x_SPI_SSP_ERROR_HOOK(spip) chSysHalt()
-
-/*
- * EXT driver system settings.
- */
-#define LPC122x_EXT_USE_EXT0 FALSE
-#define LPC122x_EXT_USE_EXT1 FALSE
-#define LPC122x_EXT_USE_EXT2 TRUE
-#define LPC122x_EXT_EXTI0_IRQ_PRIORITY 3
-#define LPC122x_EXT_EXTI1_IRQ_PRIORITY 3
-#define LPC122x_EXT_EXTI2_IRQ_PRIORITY 3
-
-/*
- * RTC driver system settings.
- */
-#define LPC122x_RTCCLK SYSCFG_RTCCLK_1Hz
-#define LPC122x_RTC_CLKDIV 0
-#define LPC122x_RTC_USE_ALARM TRUE
-#define LPC122x_RTC_IRQ_PRIORITY 3
-
-/*
- * PWM driver system settings.
- */
-#define LPC122x_PWM_USE_CT16B0 FALSE
-#define LPC122x_PWM_USE_CT16B1 TRUE
-#define LPC122x_PWM_USE_CT32B0 FALSE
-#define LPC122x_PWM_USE_CT32B1 FALSE
-#define LPC122x_PWM_USE_CT16B0_CH0 FALSE
-#define LPC122x_PWM_USE_CT16B0_CH1 FALSE
-#define LPC122x_PWM_USE_CT16B1_CH0 TRUE
-#define LPC122x_PWM_USE_CT16B1_CH1 TRUE
-#define LPC122x_PWM_USE_CT32B0_CH0 FALSE
-#define LPC122x_PWM_USE_CT32B0_CH1 FALSE
-#define LPC122x_PWM_USE_CT32B1_CH0 FALSE
-#define LPC122x_PWM_USE_CT32B1_CH1 FALSE
-#define LPC122x_PWM_CT16B0_IRQ_PRIORITY 3
-#define LPC122x_PWM_CT16B1_IRQ_PRIORITY 3
-#define LPC122x_PWM_CT32B0_IRQ_PRIORITY 3
-#define LPC122x_PWM_CT32B1_IRQ_PRIORITY 3
-#define LPC122x_PWM_CT16B0_CH0_SELECTOR PWM_CT16B0_CH0_IS_PIO0_28
-#define LPC122x_PWM_CT16B0_CH1_SELECTOR PWM_CT16B0_CH1_IS_PIO0_29
-#define LPC122x_PWM_CT16B1_CH0_SELECTOR PWM_CT16B1_CH0_IS_PIO1_5
-#define LPC122x_PWM_CT16B1_CH1_SELECTOR PWM_CT16B1_CH1_IS_PIO1_6
-#define LPC122x_PWM_CT32B0_CH0_SELECTOR PWM_CT32B0_CH0_IS_PIO2_4
-#define LPC122x_PWM_CT32B0_CH1_SELECTOR PWM_CT32B0_CH1_IS_PIO0_2
-#define LPC122x_PWM_CT32B1_CH0_SELECTOR PWM_CT32B1_CH0_IS_PIO0_6
-#define LPC122x_PWM_CT32B1_CH1_SELECTOR PWM_CT32B1_CH1_IS_PIO0_7
-
-/*
- * I2C driver system settings.
- */
-#define LPC122x_I2C_IRQ_PRIORITY 3
|