diff options
Diffstat (limited to 'os')
| -rw-r--r-- | os/hal/platforms/STM32L1xx/stm32l1xx.h | 2227 |
1 files changed, 1720 insertions, 507 deletions
diff --git a/os/hal/platforms/STM32L1xx/stm32l1xx.h b/os/hal/platforms/STM32L1xx/stm32l1xx.h index 0870e768e..62a0a658e 100644 --- a/os/hal/platforms/STM32L1xx/stm32l1xx.h +++ b/os/hal/platforms/STM32L1xx/stm32l1xx.h @@ -2,22 +2,44 @@ ******************************************************************************
* @file stm32l1xx.h
* @author MCD Application Team
- * @version V1.0.0
- * @date 31-December-2010
- * @brief CMSIS Cortex-M3 Device Peripheral Access Layer Header File.
- * This file contains all the peripheral register's definitions, bits
- * definitions and memory mapping for STM32L1xx devices.
+ * @version V1.1.1
+ * @date 09-March-2012
+ * @brief CMSIS Cortex-M3 Device Peripheral Access Layer Header File.
+ * This file contains all the peripheral register's definitions, bits
+ * definitions and memory mapping for STM32L1xx High-, Medium-density
+ * and Medium-density Plus devices.
+ *
+ * The file is the unique include file that the application programmer
+ * is using in the C source code, usually in main.c. This file contains:
+ * - Configuration section that allows to select:
+ * - The device used in the target application
+ * - To use or not the peripheral’s drivers in application code(i.e.
+ * code will be based on direct access to peripheral’s registers
+ * rather than drivers API), this option is controlled by
+ * "#define USE_STDPERIPH_DRIVER"
+ * - To change few application-specific parameters such as the HSE
+ * crystal frequency
+ * - Data structures and the address mapping for all peripherals
+ * - Peripheral's registers declarations and bits definition
+ * - Macros to access peripheral’s registers hardware
+ *
******************************************************************************
* @attention
*
- * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
- * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
- * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
- * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
- * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
- * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+ * <h2><center>© COPYRIGHT 2012 STMicroelectronics</center></h2>
+ *
+ * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at:
+ *
+ * http://www.st.com/software_license_agreement_liberty_v2
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
*
- * <h2><center>© COPYRIGHT 2010 STMicroelectronics</center></h2>
******************************************************************************
*/
@@ -28,82 +50,101 @@ /** @addtogroup stm32l1xx
* @{
*/
-
+
#ifndef __STM32L1XX_H
#define __STM32L1XX_H
#ifdef __cplusplus
extern "C" {
-#endif
-
+#endif
+
/** @addtogroup Library_configuration_section
* @{
*/
-
-/* Uncomment the line below according to the target STM32L device used in your
- application
+
+/* Uncomment the line below according to the target STM32L device used in your
+ application
*/
-#if !defined (STM32L1XX_MD)
- #define STM32L1XX_MD /*!< STM32L1XX_MD: STM32L Ultra Low Power Medium-density devices */
+#if !defined (STM32L1XX_MD) && !defined (STM32L1XX_MDP) && !defined (STM32L1XX_HD)
+ /* #define STM32L1XX_MD */ /*!< STM32L1XX_MD: STM32L Ultra Low Power Medium-density devices */
+ /* #define STM32L1XX_MDP */ /*!< STM32L1XX_MDP: STM32L Ultra Low Power Medium-density Plus devices */
+ #define STM32L1XX_HD /*!< STM32L1XX_HD: STM32L Ultra Low Power High-density devices */
#endif
/* Tip: To avoid modifying this file each time you need to switch between these
devices, you can define the device in your toolchain compiler preprocessor.
- - Ultra Low Power Medium-density devices are STM32L151xx and STM32L152xx
+ - Ultra Low Power Medium-density devices are STM32L151xx and STM32L152xx
microcontrollers where the Flash memory density ranges between 64 and 128 Kbytes.
-
+ - Ultra Low Power Medium-density Plus devices are STM32L151xx, STM32L152xx and
+ STM32L162xx microcontrollers where the Flash memory density is 256 Kbytes.
+ - Ultra Low Power High-density devices are STM32L151xx, STM32L152xx and STM32L162xx
+ microcontrollers where the Flash memory density is 384 Kbytes.
*/
-#if !defined (STM32L1XX_MD)
+#if !defined (STM32L1XX_MD) && !defined (STM32L1XX_MDP) && !defined (STM32L1XX_HD)
#error "Please select first the target STM32L1xx device used in your application (in stm32l1xx.h file)"
#endif
#if !defined USE_STDPERIPH_DRIVER
/**
* @brief Comment the line below if you will not use the peripherals drivers.
- In this case, these drivers will not be included and the application code will
- be based on direct access to peripherals registers
+ In this case, these drivers will not be included and the application code will
+ be based on direct access to peripherals registers
*/
/*#define USE_STDPERIPH_DRIVER*/
#endif
/**
* @brief In the following line adjust the value of External High Speed oscillator (HSE)
- used in your application
-
+ used in your application
+
Tip: To avoid modifying this file each time you need to use different HSE, you
can define the HSE value in your toolchain compiler preprocessor.
*/
-#define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz*/
+#if !defined (HSE_VALUE)
+#define HSE_VALUE ((uint32_t)8000000) /*!< Value of the External oscillator in Hz */
+#endif
/**
- * @brief In the following line adjust the External High Speed oscillator (HSE) Startup
- Timeout value
+ * @brief In the following line adjust the External High Speed oscillator (HSE) Startup
+ Timeout value
*/
+#if !defined (HSE_STARTUP_TIMEOUT)
#define HSE_STARTUP_TIMEOUT ((uint16_t)0x0500) /*!< Time out for HSE start up */
+#endif
/**
- * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup
- Timeout value
+ * @brief In the following line adjust the Internal High Speed oscillator (HSI) Startup
+ Timeout value
*/
+#if !defined (HSI_STARTUP_TIMEOUT)
#define HSI_STARTUP_TIMEOUT ((uint16_t)0x0500) /*!< Time out for HSI start up */
+#endif
+#if !defined (HSI_VALUE)
#define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal High Speed oscillator in Hz.
The real value may vary depending on the variations
in voltage and temperature. */
+#endif
+
+#if !defined (LSI_VALUE)
#define LSI_VALUE ((uint32_t)37000) /*!< Value of the Internal Low Speed oscillator in Hz
The real value may vary depending on the variations
in voltage and temperature. */
+#endif
+
+#if !defined (LSE_VALUE)
#define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */
+#endif
/**
- * @brief STM32L1xx Standard Peripheral Library version number
+ * @brief STM32L1xx Standard Peripheral Library version number V1.1.1
*/
#define __STM32L1XX_STDPERIPH_VERSION_MAIN (0x01) /*!< [31:24] main version */
-#define __STM32L1XX_STDPERIPH_VERSION_SUB1 (0x00) /*!< [23:16] sub1 version */
-#define __STM32L1XX_STDPERIPH_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
-#define __STM32L1XX_STDPERIPH_VERSION_RC (0x00) /*!< [7:0] release candidate */
+#define __STM32L1XX_STDPERIPH_VERSION_SUB1 (0x01) /*!< [23:16] sub1 version */
+#define __STM32L1XX_STDPERIPH_VERSION_SUB2 (0x01) /*!< [15:8] sub2 version */
+#define __STM32L1XX_STDPERIPH_VERSION_RC (0x00) /*!< [7:0] release candidate */
#define __STM32L1XX_STDPERIPH_VERSION ( (__STM32L1XX_STDPERIPH_VERSION_MAIN << 24)\
|(__STM32L1XX_STDPERIPH_VERSION_SUB1 << 16)\
|(__STM32L1XX_STDPERIPH_VERSION_SUB2 << 8)\
@@ -118,13 +159,14 @@ */
/**
- * @brief STM32L1xx Interrupt Number Definition, according to the selected device
- * in @ref Library_configuration_section
+ * @brief STM32L1xx Interrupt Number Definition, according to the selected device
+ * in @ref Library_configuration_section
*/
+#define __CM3_REV 0x200 /*!< Cortex-M3 Revision r2p0 */
#define __MPU_PRESENT 1 /*!< STM32L provides MPU */
#define __NVIC_PRIO_BITS 4 /*!< STM32 uses 4 Bits for the Priority Levels */
#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
-
+
/*!< Interrupt Number Definition */
typedef enum IRQn
{
@@ -133,7 +175,7 @@ typedef enum IRQn MemoryManagement_IRQn = -12, /*!< 4 Cortex-M3 Memory Management Interrupt */
BusFault_IRQn = -11, /*!< 5 Cortex-M3 Bus Fault Interrupt */
UsageFault_IRQn = -10, /*!< 6 Cortex-M3 Usage Fault Interrupt */
- SVCall_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */
+ SVC_IRQn = -5, /*!< 11 Cortex-M3 SV Call Interrupt */
DebugMonitor_IRQn = -4, /*!< 12 Cortex-M3 Debug Monitor Interrupt */
PendSV_IRQn = -2, /*!< 14 Cortex-M3 Pend SV Interrupt */
SysTick_IRQn = -1, /*!< 15 Cortex-M3 System Tick Interrupt */
@@ -183,7 +225,38 @@ typedef enum IRQn RTC_Alarm_IRQn = 41, /*!< RTC Alarm through EXTI Line Interrupt */
USB_FS_WKUP_IRQn = 42, /*!< USB FS WakeUp from suspend through EXTI Line Interrupt */
TIM6_IRQn = 43, /*!< TIM6 global Interrupt */
+#ifdef STM32L1XX_MD
TIM7_IRQn = 44 /*!< TIM7 global Interrupt */
+#endif
+
+#ifdef STM32L1XX_MDP
+ TIM7_IRQn = 44, /*!< TIM7 global Interrupt */
+ TIM5_IRQn = 46, /*!< TIM5 global Interrupt */
+ SPI3_IRQn = 47, /*!< SPI3 global Interrupt */
+ DMA2_Channel1_IRQn = 50, /*!< DMA2 Channel 1 global Interrupt */
+ DMA2_Channel2_IRQn = 51, /*!< DMA2 Channel 2 global Interrupt */
+ DMA2_Channel3_IRQn = 52, /*!< DMA2 Channel 3 global Interrupt */
+ DMA2_Channel4_IRQn = 53, /*!< DMA2 Channel 4 global Interrupt */
+ DMA2_Channel5_IRQn = 54, /*!< DMA2 Channel 5 global Interrupt */
+ AES_IRQn = 55, /*!< AES global Interrupt */
+ COMP_ACQ_IRQn = 56 /*!< Comparator Channel Acquisition global Interrupt */
+#endif
+
+#ifdef STM32L1XX_HD
+ TIM7_IRQn = 44, /*!< TIM7 global Interrupt */
+ SDIO_IRQn = 45, /*!< SDIO global Interrupt */
+ TIM5_IRQn = 46, /*!< TIM5 global Interrupt */
+ SPI3_IRQn = 47, /*!< SPI3 global Interrupt */
+ UART4_IRQn = 48, /*!< UART4 global Interrupt */
+ UART5_IRQn = 49, /*!< UART5 global Interrupt */
+ DMA2_Channel1_IRQn = 50, /*!< DMA2 Channel 1 global Interrupt */
+ DMA2_Channel2_IRQn = 51, /*!< DMA2 Channel 2 global Interrupt */
+ DMA2_Channel3_IRQn = 52, /*!< DMA2 Channel 3 global Interrupt */
+ DMA2_Channel4_IRQn = 53, /*!< DMA2 Channel 4 global Interrupt */
+ DMA2_Channel5_IRQn = 54, /*!< DMA2 Channel 5 global Interrupt */
+ AES_IRQn = 55, /*!< AES global Interrupt */
+ COMP_ACQ_IRQn = 56 /*!< Comparator Channel Acquisition global Interrupt */
+#endif
} IRQn_Type;
/**
@@ -197,7 +270,7 @@ typedef enum IRQn /** @addtogroup Exported_types
* @{
- */
+ */
typedef enum {RESET = 0, SET = !RESET} FlagStatus, ITStatus;
@@ -206,41 +279,41 @@ typedef enum {DISABLE = 0, ENABLE = !DISABLE} FunctionalState; typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrorStatus;
-/**
+/**
* @brief __RAM_FUNC definition
- */
+ */
#if defined ( __CC_ARM )
/* ARM Compiler
------------
- RAM functions are defined using the toolchain options.
- Functions that are executed in RAM should reside in a separate source
- module. Using the 'Options for File' dialog you can simply change the
+ RAM functions are defined using the toolchain options.
+ Functions that are executed in RAM should reside in a separate source
+ module. Using the 'Options for File' dialog you can simply change the
'Code / Const' area of a module to a memory space in physical RAM.
- Available memory areas are declared in the 'Target' tab of the
- 'Options for Target' dialog.
+ Available memory areas are declared in the 'Target' tab of the
+ 'Options for Target' dialog.
*/
- #define __RAM_FUNC FLASH_Status
+ #define __RAM_FUNC FLASH_Status
#elif defined ( __ICCARM__ )
/* ICCARM Compiler
---------------
- RAM functions are defined using a specific toolchain keyword "__ramfunc".
+ RAM functions are defined using a specific toolchain keyword "__ramfunc".
*/
#define __RAM_FUNC __ramfunc FLASH_Status
#elif defined ( __GNUC__ )
/* GNU Compiler
------------
- RAM functions are defined using a specific toolchain attribute
- "__attribute__((section(".data")))".
+ RAM functions are defined using a specific toolchain attribute
+ "__attribute__((section(".data")))".
*/
#define __RAM_FUNC FLASH_Status __attribute__((section(".data")))
#elif defined ( __TASKING__ )
/* TASKING Compiler
----------------
- RAM functions are defined using a specific toolchain pragma. This pragma is
- defined in the stm32l1xx_flash_ramfunc.c
+ RAM functions are defined using a specific toolchain pragma. This pragma is
+ defined in the stm32l1xx_flash_ramfunc.c
*/
#define __RAM_FUNC FLASH_Status
@@ -252,451 +325,549 @@ typedef enum {ERROR = 0, SUCCESS = !ERROR} ErrorStatus; /** @addtogroup Peripheral_registers_structures
* @{
- */
+ */
-/**
+/**
* @brief Analog to Digital Converter
*/
typedef struct
{
- __IO uint32_t SR;
- __IO uint32_t CR1;
- __IO uint32_t CR2;
- __IO uint32_t SMPR1;
- __IO uint32_t SMPR2;
- __IO uint32_t SMPR3;
- __IO uint32_t JOFR1;
- __IO uint32_t JOFR2;
- __IO uint32_t JOFR3;
- __IO uint32_t JOFR4;
- __IO uint32_t HTR;
- __IO uint32_t LTR;
- __IO uint32_t SQR1;
- __IO uint32_t SQR2;
- __IO uint32_t SQR3;
- __IO uint32_t SQR4;
- __IO uint32_t SQR5;
- __IO uint32_t JSQR;
- __IO uint32_t JDR1;
- __IO uint32_t JDR2;
- __IO uint32_t JDR3;
- __IO uint32_t JDR4;
- __IO uint32_t DR;
+ __IO uint32_t SR; /*!< ADC status register, Address offset: 0x00 */
+ __IO uint32_t CR1; /*!< ADC control register 1, Address offset: 0x04 */
+ __IO uint32_t CR2; /*!< ADC control register 2, Address offset: 0x08 */
+ __IO uint32_t SMPR1; /*!< ADC sample time register 1, Address offset: 0x0C */
+ __IO uint32_t SMPR2; /*!< ADC sample time register 2, Address offset: 0x10 */
+ __IO uint32_t SMPR3; /*!< ADC sample time register 3, Address offset: 0x14 */
+ __IO uint32_t JOFR1; /*!< ADC injected channel data offset register 1, Address offset: 0x18 */
+ __IO uint32_t JOFR2; /*!< ADC injected channel data offset register 2, Address offset: 0x1C */
+ __IO uint32_t JOFR3; /*!< ADC injected channel data offset register 3, Address offset: 0x20 */
+ __IO uint32_t JOFR4; /*!< ADC injected channel data offset register 4, Address offset: 0x24 */
+ __IO uint32_t HTR; /*!< ADC watchdog higher threshold register, Address offset: 0x28 */
+ __IO uint32_t LTR; /*!< ADC watchdog lower threshold register, Address offset: 0x2C */
+ __IO uint32_t SQR1; /*!< ADC regular sequence register 1, Address offset: 0x30 */
+ __IO uint32_t SQR2; /*!< ADC regular sequence register 2, Address offset: 0x34 */
+ __IO uint32_t SQR3; /*!< ADC regular sequence register 3, Address offset: 0x38 */
+ __IO uint32_t SQR4; /*!< ADC regular sequence register 4, Address offset: 0x3C */
+ __IO uint32_t SQR5; /*!< ADC regular sequence register 5, Address offset: 0x40 */
+ __IO uint32_t JSQR; /*!< ADC injected sequence register, Address offset: 0x44 */
+ __IO uint32_t JDR1; /*!< ADC injected data register 1, Address offset: 0x48 */
+ __IO uint32_t JDR2; /*!< ADC injected data register 2, Address offset: 0x4C */
+ __IO uint32_t JDR3; /*!< ADC injected data register 3, Address offset: 0x50 */
+ __IO uint32_t JDR4; /*!< ADC injected data register 4, Address offset: 0x54 */
+ __IO uint32_t DR; /*!< ADC regular data register, Address offset: 0x58 */
+ __IO uint32_t SMPR0; /*!< ADC sample time register 0, Address offset: 0x5C */
} ADC_TypeDef;
typedef struct
{
- __IO uint32_t CSR;
- __IO uint32_t CCR;
+ __IO uint32_t CSR; /*!< ADC common status register, Address offset: ADC1 base address + 0x300 */
+ __IO uint32_t CCR; /*!< ADC common control register, Address offset: ADC1 base address + 0x304 */
} ADC_Common_TypeDef;
-/**
- * @brief Comparator
+/**
+ * @brief AES hardware accelerator
+ */
+
+typedef struct
+{
+ __IO uint32_t CR; /*!< AES control register, Address offset: 0x00 */
+ __IO uint32_t SR; /*!< AES status register, Address offset: 0x04 */
+ __IO uint32_t DINR; /*!< AES data input register, Address offset: 0x08 */
+ __IO uint32_t DOUTR; /*!< AES data output register, Address offset: 0x0C */
+ __IO uint32_t KEYR0; /*!< AES key register 0, Address offset: 0x10 */
+ __IO uint32_t KEYR1; /*!< AES key register 1, Address offset: 0x14 */
+ __IO uint32_t KEYR2; /*!< AES key register 2, Address offset: 0x18 */
+ __IO uint32_t KEYR3; /*!< AES key register 3, Address offset: 0x1C */
+ __IO uint32_t IVR0; /*!< AES initialization vector register 0, Address offset: 0x20 */
+ __IO uint32_t IVR1; /*!< AES initialization vector register 1, Address offset: 0x24 */
+ __IO uint32_t IVR2; /*!< AES initialization vector register 2, Address offset: 0x28 */
+ __IO uint32_t IVR3; /*!< AES initialization vector register 3, Address offset: 0x2C */
+} AES_TypeDef;
+
+/**
+ * @brief Comparator
*/
typedef struct
{
- __IO uint32_t CSR;
+ __IO uint32_t CSR; /*!< COMP comparator control and status register, Address offset: 0x00 */
} COMP_TypeDef;
-/**
+/**
* @brief CRC calculation unit
*/
typedef struct
{
- __IO uint32_t DR;
- __IO uint8_t IDR;
- uint8_t RESERVED0;
- uint16_t RESERVED1;
- __IO uint32_t CR;
+ __IO uint32_t DR; /*!< CRC Data register, Address offset: 0x00 */
+ __IO uint8_t IDR; /*!< CRC Independent data register, Address offset: 0x04 */
+ uint8_t RESERVED0; /*!< Reserved, 0x05 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint32_t CR; /*!< CRC Control register, Address offset: 0x08 */
} CRC_TypeDef;
-/**
+/**
* @brief Digital to Analog Converter
*/
typedef struct
{
- __IO uint32_t CR;
- __IO uint32_t SWTRIGR;
- __IO uint32_t DHR12R1;
- __IO uint32_t DHR12L1;
- __IO uint32_t DHR8R1;
- __IO uint32_t DHR12R2;
- __IO uint32_t DHR12L2;
- __IO uint32_t DHR8R2;
- __IO uint32_t DHR12RD;
- __IO uint32_t DHR12LD;
- __IO uint32_t DHR8RD;
- __IO uint32_t DOR1;
- __IO uint32_t DOR2;
- __IO uint32_t SR;
+ __IO uint32_t CR; /*!< DAC control register, Address offset: 0x00 */
+ __IO uint32_t SWTRIGR; /*!< DAC software trigger register, Address offset: 0x04 */
+ __IO uint32_t DHR12R1; /*!< DAC channel1 12-bit right-aligned data holding register, Address offset: 0x08 */
+ __IO uint32_t DHR12L1; /*!< DAC channel1 12-bit left aligned data holding register, Address offset: 0x0C */
+ __IO uint32_t DHR8R1; /*!< DAC channel1 8-bit right aligned data holding register, Address offset: 0x10 */
+ __IO uint32_t DHR12R2; /*!< DAC channel2 12-bit right aligned data holding register, Address offset: 0x14 */
+ __IO uint32_t DHR12L2; /*!< DAC channel2 12-bit left aligned data holding register, Address offset: 0x18 */
+ __IO uint32_t DHR8R2; /*!< DAC channel2 8-bit right-aligned data holding register, Address offset: 0x1C */
+ __IO uint32_t DHR12RD; /*!< Dual DAC 12-bit right-aligned data holding register, Address offset: 0x20 */
+ __IO uint32_t DHR12LD; /*!< DUAL DAC 12-bit left aligned data holding register, Address offset: 0x24 */
+ __IO uint32_t DHR8RD; /*!< DUAL DAC 8-bit right aligned data holding register, Address offset: 0x28 */
+ __IO uint32_t DOR1; /*!< DAC channel1 data output register, Address offset: 0x2C */
+ __IO uint32_t DOR2; /*!< DAC channel2 data output register, Address offset: 0x30 */
+ __IO uint32_t SR; /*!< DAC status register, Address offset: 0x34 */
} DAC_TypeDef;
-/**
+/**
* @brief Debug MCU
*/
typedef struct
{
- __IO uint32_t IDCODE;
- __IO uint32_t CR;
- __IO uint32_t APB1FZ;
- __IO uint32_t APB2FZ;
+ __IO uint32_t IDCODE; /*!< MCU device ID code, Address offset: 0x00 */
+ __IO uint32_t CR; /*!< Debug MCU configuration register, Address offset: 0x04 */
+ __IO uint32_t APB1FZ; /*!< Debug MCU APB1 freeze register, Address offset: 0x08 */
+ __IO uint32_t APB2FZ; /*!< Debug MCU APB2 freeze register, Address offset: 0x0C */
}DBGMCU_TypeDef;
-/**
+/**
* @brief DMA Controller
*/
typedef struct
{
- __IO uint32_t CCR;
- __IO uint32_t CNDTR;
- __IO uint32_t CPAR;
- __IO uint32_t CMAR;
+ __IO uint32_t CCR; /*!< DMA channel x configuration register */
+ __IO uint32_t CNDTR; /*!< DMA channel x number of data register */
+ __IO uint32_t CPAR; /*!< DMA channel x peripheral address register */
+ __IO uint32_t CMAR; /*!< DMA channel x memory address register */
} DMA_Channel_TypeDef;
typedef struct
{
- __IO uint32_t ISR;
- __IO uint32_t IFCR;
+ __IO uint32_t ISR; /*!< DMA interrupt status register, Address offset: 0x00 */
+ __IO uint32_t IFCR; /*!< DMA interrupt flag clear register, Address offset: 0x04 */
} DMA_TypeDef;
-/**
+/**
* @brief External Interrupt/Event Controller
*/
typedef struct
{
- __IO uint32_t IMR;
- __IO uint32_t EMR;
- __IO uint32_t RTSR;
- __IO uint32_t FTSR;
- __IO uint32_t SWIER;
- __IO uint32_t PR;
+ __IO uint32_t IMR; /*!< EXTI interrupt mask register, Address offset: 0x00 */
+ __IO uint32_t EMR; /*!< EXTI event mask register, Address offset: 0x04 */
+ __IO uint32_t RTSR; /*!< EXTI rising edge trigger selection register, Address offset: 0x08 */
+ __IO uint32_t FTSR; /*!< EXTI Falling edge trigger selection register, Address offset: 0x0C */
+ __IO uint32_t SWIER; /*!< EXTI software interrupt event register, Address offset: 0x10 */
+ __IO uint32_t PR; /*!< EXTI pending register, Address offset: 0x14 */
} EXTI_TypeDef;
-/**
+/**
* @brief FLASH Registers
*/
typedef struct
{
- __IO uint32_t ACR;
- __IO uint32_t PECR;
- __IO uint32_t PDKEYR;
- __IO uint32_t PEKEYR;
- __IO uint32_t PRGKEYR;
- __IO uint32_t OPTKEYR;
- __IO uint32_t SR;
- __IO uint32_t OBR;
- __IO uint32_t WRPR;
+ __IO uint32_t ACR; /*!< Access control register, Address offset: 0x00 */
+ __IO uint32_t PECR; /*!< Program/erase control register, Address offset: 0x04 */
+ __IO uint32_t PDKEYR; /*!< Power down key register, Address offset: 0x08 */
+ __IO uint32_t PEKEYR; /*!< Program/erase key register, Address offset: 0x0c */
+ __IO uint32_t PRGKEYR; /*!< Program memory key register, Address offset: 0x10 */
+ __IO uint32_t OPTKEYR; /*!< Option byte key register, Address offset: 0x14 */
+ __IO uint32_t SR; /*!< Status register, Address offset: 0x18 */
+ __IO uint32_t OBR; /*!< Option byte register, Address offset: 0x1c */
+ __IO uint32_t WRPR; /*!< Write protection register, Address offset: 0x20 */
+ uint32_t RESERVED[23]; /*!< Reserved, 0x24 */
+ __IO uint32_t WRPR1; /*!< Write protection register 1, Address offset: 0x28 */
+ __IO uint32_t WRPR2; /*!< Write protection register 2, Address offset: 0x2C */
} FLASH_TypeDef;
-/**
+/**
* @brief Option Bytes Registers
*/
-
+
typedef struct
{
- __IO uint32_t RDP;
- __IO uint32_t USER;
- __IO uint32_t WRP01;
- __IO uint32_t WRP23;
+ __IO uint32_t RDP; /*!< Read protection register, Address offset: 0x00 */
+ __IO uint32_t USER; /*!< user register, Address offset: 0x04 */
+ __IO uint32_t WRP01; /*!< write protection register 0 1, Address offset: 0x08 */
+ __IO uint32_t WRP23; /*!< write protection register 2 3, Address offset: 0x0C */
+ __IO uint32_t WRP45; /*!< write protection register 4 5, Address offset: 0x10 */
+ __IO uint32_t WRP67; /*!< write protection register 6 7, Address offset: 0x14 */
+ __IO uint32_t WRP89; /*!< write protection register 8 9, Address offset: 0x18 */
+ __IO uint32_t WRP1011; /*!< write protection register 10 11, Address offset: 0x1C */
} OB_TypeDef;
-/**
+/**
+ * @brief Operational Amplifier (OPAMP)
+ */
+
+typedef struct
+{
+ __IO uint32_t CSR; /*!< OPAMP control/status register, Address offset: 0x00 */
+ __IO uint32_t OTR; /*!< OPAMP offset trimming register for normal mode, Address offset: 0x04 */
+ __IO uint32_t LPOTR; /*!< OPAMP offset trimming register for low power mode, Address offset: 0x08 */
+} OPAMP_TypeDef;
+
+/**
+ * @brief Flexible Static Memory Controller
+ */
+
+typedef struct
+{
+ __IO uint32_t BTCR[8]; /*!< NOR/PSRAM chip-select control register(BCR) and chip-select timing register(BTR), Address offset: 0x00-1C */
+} FSMC_Bank1_TypeDef;
+
+/**
+ * @brief Flexible Static Memory Controller Bank1E
+ */
+
+typedef struct
+{
+ __IO uint32_t BWTR[7]; /*!< NOR/PSRAM write timing registers, Address offset: 0x104-0x11C */
+} FSMC_Bank1E_TypeDef;
+
+/**
* @brief General Purpose IO
*/
/* CHIBIOS FIX */
#if 0
typedef struct
{
- __IO uint32_t MODER;
- __IO uint16_t OTYPER;
- uint16_t RESERVED0;
- __IO uint32_t OSPEEDR;
- __IO uint32_t PUPDR;
- __IO uint16_t IDR;
- uint16_t RESERVED1;
- __IO uint16_t ODR;
- uint16_t RESERVED2;
- __IO uint16_t BSRRL; /* BSRR register is split to 2 * 16-bit fields BSRRL */
- __IO uint16_t BSRRH; /* BSRR register is split to 2 * 16-bit fields BSRRH */
- __IO uint32_t LCKR;
- __IO uint32_t AFR[2];
+ __IO uint32_t MODER; /*!< GPIO port mode register, Address offset: 0x00 */
+ __IO uint16_t OTYPER; /*!< GPIO port output type register, Address offset: 0x04 */
+ uint16_t RESERVED0; /*!< Reserved, 0x06 */
+ __IO uint32_t OSPEEDR; /*!< GPIO port output speed register, Address offset: 0x08 */
+ __IO uint32_t PUPDR; /*!< GPIO port pull-up/pull-down register, Address offset: 0x0C */
+ __IO uint16_t IDR; /*!< GPIO port input data register, Address offset: 0x10 */
+ uint16_t RESERVED1; /*!< Reserved, 0x12 */
+ __IO uint16_t ODR; /*!< GPIO port output data register, Address offset: 0x14 */
+ uint16_t RESERVED2; /*!< Reserved, 0x16 */
+ __IO uint16_t BSRRL; /*!< GPIO port bit set/reset low registerBSRR, Address offset: 0x18 */
+ __IO uint16_t BSRRH; /*!< GPIO port bit set/reset high registerBSRR, Address offset: 0x1A */
+ __IO uint32_t LCKR; /*!< GPIO port configuration lock register, Address offset: 0x1C */
+ __IO uint32_t AFR[2]; /*!< GPIO alternate function low register, Address offset: 0x20-0x24 */
+ __IO uint16_t BRR; /*!< GPIO bit reset register, Address offset: 0x28 */
+ uint16_t RESERVED3; /*!< Reserved, 0x2A */
} GPIO_TypeDef;
#endif
-/**
+/**
* @brief SysTem Configuration
*/
typedef struct
{
- __IO uint32_t MEMRMP;
- __IO uint32_t PMC;
- __IO uint32_t EXTICR[4];
+ __IO uint32_t MEMRMP; /*!< SYSCFG memory remap register, Address offset: 0x00 */
+ __IO uint32_t PMC; /*!< SYSCFG peripheral mode configuration register, Address offset: 0x04 */
+ __IO uint32_t EXTICR[4]; /*!< SYSCFG external interrupt configuration registers, Address offset: 0x08-0x14 */
} SYSCFG_TypeDef;
-/**
+/**
* @brief Inter-integrated Circuit Interface
*/
typedef struct
{
- __IO uint16_t CR1;
- uint16_t RESERVED0;
- __IO uint16_t CR2;
- uint16_t RESERVED1;
- __IO uint16_t OAR1;
- uint16_t RESERVED2;
- __IO uint16_t OAR2;
- uint16_t RESERVED3;
- __IO uint16_t DR;
- uint16_t RESERVED4;
- __IO uint16_t SR1;
- uint16_t RESERVED5;
- __IO uint16_t SR2;
- uint16_t RESERVED6;
- __IO uint16_t CCR;
- uint16_t RESERVED7;
- __IO uint16_t TRISE;
- uint16_t RESERVED8;
+ __IO uint16_t CR1; /*!< I2C Control register 1, Address offset: 0x00 */
+ uint16_t RESERVED0; /*!< Reserved, 0x02 */
+ __IO uint16_t CR2; /*!< I2C Control register 2, Address offset: 0x04 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint16_t OAR1; /*!< I2C Own address register 1, Address offset: 0x08 */
+ uint16_t RESERVED2; /*!< Reserved, 0x0A */
+ __IO uint16_t OAR2; /*!< I2C Own address register 2, Address offset: 0x0C */
+ uint16_t RESERVED3; /*!< Reserved, 0x0E */
+ __IO uint16_t DR; /*!< I2C Data register, Address offset: 0x10 */
+ uint16_t RESERVED4; /*!< Reserved, 0x12 */
+ __IO uint16_t SR1; /*!< I2C Status register 1, Address offset: 0x14 */
+ uint16_t RESERVED5; /*!< Reserved, 0x16 */
+ __IO uint16_t SR2; /*!< I2C Status register 2, Address offset: 0x18 */
+ uint16_t RESERVED6; /*!< Reserved, 0x1A */
+ __IO uint16_t CCR; /*!< I2C Clock control register, Address offset: 0x1C */
+ uint16_t RESERVED7; /*!< Reserved, 0x1E */
+ __IO uint16_t TRISE; /*!< I2C TRISE register, Address offset: 0x20 */
+ uint16_t RESERVED8; /*!< Reserved, 0x22 */
} I2C_TypeDef;
-/**
+/**
* @brief Independent WATCHDOG
*/
typedef struct
{
- __IO uint32_t KR;
- __IO uint32_t PR;
- __IO uint32_t RLR;
- __IO uint32_t SR;
+ __IO uint32_t KR; /*!< Key register, Address offset: 0x00 */
+ __IO uint32_t PR; /*!< Prescaler register, Address offset: 0x04 */
+ __IO uint32_t RLR; /*!< Reload register, Address offset: 0x08 */
+ __IO uint32_t SR; /*!< Status register, Address offset: 0x0C */
} IWDG_TypeDef;
-/**
+/**
* @brief LCD
*/
typedef struct
{
- __IO uint32_t CR;
- __IO uint32_t FCR;
- __IO uint32_t SR;
- __IO uint32_t CLR;
- uint32_t RESERVED;
- __IO uint32_t RAM[16];
+ __IO uint32_t CR; /*!< LCD control register, Address offset: 0x00 */
+ __IO uint32_t FCR; /*!< LCD frame control register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< LCD status register, Address offset: 0x08 */
+ __IO uint32_t CLR; /*!< LCD clear register, Address offset: 0x0C */
+ uint32_t RESERVED; /*!< Reserved, Address offset: 0x10 */
+ __IO uint32_t RAM[16]; /*!< LCD display memory, Address offset: 0x14-0x50 */
} LCD_TypeDef;
-/**
+/**
* @brief Power Control
*/
typedef struct
{
- __IO uint32_t CR;
- __IO uint32_t CSR;
+ __IO uint32_t CR; /*!< PWR power control register, Address offset: 0x00 */
+ __IO uint32_t CSR; /*!< PWR power control/status register, Address offset: 0x04 */
} PWR_TypeDef;
-/**
+/**
* @brief Reset and Clock Control
*/
typedef struct
{
- __IO uint32_t CR;
- __IO uint32_t ICSCR;
- __IO uint32_t CFGR;
- __IO uint32_t CIR;
- __IO uint32_t AHBRSTR;
- __IO uint32_t APB2RSTR;
- __IO uint32_t APB1RSTR;
- __IO uint32_t AHBENR;
- __IO uint32_t APB2ENR;
- __IO uint32_t APB1ENR;
- __IO uint32_t AHBLPENR;
- __IO uint32_t APB2LPENR;
- __IO uint32_t APB1LPENR;
- __IO uint32_t CSR;
+ __IO uint32_t CR; /*!< RCC clock control register, Address offset: 0x00 */
+ __IO uint32_t ICSCR; /*!< RCC Internal clock sources calibration register, Address offset: 0x04 */
+ __IO uint32_t CFGR; /*!< RCC Clock configuration register, Address offset: 0x08 */
+ __IO uint32_t CIR; /*!< RCC Clock interrupt register, Address offset: 0x0C */
+ __IO uint32_t AHBRSTR; /*!< RCC AHB peripheral reset register, Address offset: 0x10 */
+ __IO uint32_t APB2RSTR; /*!< RCC APB2 peripheral reset register, Address offset: 0x14 */
+ __IO uint32_t APB1RSTR; /*!< RCC APB1 peripheral reset register, Address offset: 0x18 */
+ __IO uint32_t AHBENR; /*!< RCC AHB peripheral clock enable register, Address offset: 0x1C */
+ __IO uint32_t APB2ENR; /*!< RCC APB2 peripheral clock enable register, Address offset: 0x20 */
+ __IO uint32_t APB1ENR; /*!< RCC APB1 peripheral clock enable register, Address offset: 0x24 */
+ __IO uint32_t AHBLPENR; /*!< RCC AHB peripheral clock enable in low power mode register, Address offset: 0x28 */
+ __IO uint32_t APB2LPENR; /*!< RCC APB2 peripheral clock enable in low power mode register, Address offset: 0x2C */
+ __IO uint32_t APB1LPENR; /*!< RCC APB1 peripheral clock enable in low power mode register, Address offset: 0x30 */
+ __IO uint32_t CSR; /*!< RCC Control/status register, Address offset: 0x34 */
} RCC_TypeDef;
-/**
- * @brief Routing Interface
+/**
+ * @brief Routing Interface
*/
typedef struct
{
- __IO uint32_t ICR;
- __IO uint32_t ASCR1;
- __IO uint32_t ASCR2;
- __IO uint32_t HYSCR1;
- __IO uint32_t HYSCR2;
- __IO uint32_t HYSCR3;
+ __IO uint32_t ICR; /*!< RI input capture register, Address offset: 0x00 */
+ __IO uint32_t ASCR1; /*!< RI analog switches control register, Address offset: 0x04 */
+ __IO uint32_t ASCR2; /*!< RI analog switch control register 2, Address offset: 0x08 */
+ __IO uint32_t HYSCR1; /*!< RI hysteresis control register, Address offset: 0x0C */
+ __IO uint32_t HYSCR2; /*!< RI Hysteresis control register, Address offset: 0x10 */
+ __IO uint32_t HYSCR3; /*!< RI Hysteresis control register, Address offset: 0x14 */
+ __IO uint32_t HYSCR4; /*!< RI Hysteresis control register, Address offset: 0x18 */
} RI_TypeDef;
-/**
+/**
* @brief Real-Time Clock
*/
typedef struct
{
- __IO uint32_t TR;
- __IO uint32_t DR;
- __IO uint32_t CR;
- __IO uint32_t ISR;
- __IO uint32_t PRER;
- __IO uint32_t WUTR;
- __IO uint32_t CALIBR;
- __IO uint32_t ALRMAR;
- __IO uint32_t ALRMBR;
- __IO uint32_t WPR;
- uint32_t RESERVED1;
- uint32_t RESERVED2;
- __IO uint32_t TSTR;
- __IO uint32_t TSDR;
- uint32_t RESERVED3;
- uint32_t RESERVED4;
- __IO uint32_t TAFCR;
- uint32_t RESERVED5;
- uint32_t RESERVED6;
- uint32_t RESERVED7;
- __IO uint32_t BKP0R;
- __IO uint32_t BKP1R;
- __IO uint32_t BKP2R;
- __IO uint32_t BKP3R;
- __IO uint32_t BKP4R;
- __IO uint32_t BKP5R;
- __IO uint32_t BKP6R;
- __IO uint32_t BKP7R;
- __IO uint32_t BKP8R;
- __IO uint32_t BKP9R;
- __IO uint32_t BKP10R;
- __IO uint32_t BKP11R;
- __IO uint32_t BKP12R;
- __IO uint32_t BKP13R;
- __IO uint32_t BKP14R;
- __IO uint32_t BKP15R;
- __IO uint32_t BKP16R;
- __IO uint32_t BKP17R;
- __IO uint32_t BKP18R;
- __IO uint32_t BKP19R;
+ __IO uint32_t TR; /*!< RTC time register, Address offset: 0x00 */
+ __IO uint32_t DR; /*!< RTC date register, Address offset: 0x04 */
+ __IO uint32_t CR; /*!< RTC control register, Address offset: 0x08 */
+ __IO uint32_t ISR; /*!< RTC initialization and status register, Address offset: 0x0C */
+ __IO uint32_t PRER; /*!< RTC prescaler register, Address offset: 0x10 */
+ __IO uint32_t WUTR; /*!< RTC wakeup timer register, Address offset: 0x14 */
+ __IO uint32_t CALIBR; /*!< RTC calibration register, Address offset: 0x18 */
+ __IO uint32_t ALRMAR; /*!< RTC alarm A register, Address offset: 0x1C */
+ __IO uint32_t ALRMBR; /*!< RTC alarm B register, Address offset: 0x20 */
+ __IO uint32_t WPR; /*!< RTC write protection register, Address offset: 0x24 */
+ __IO uint32_t SSR; /*!< RTC sub second register, Address offset: 0x28 */
+ __IO uint32_t SHIFTR; /*!< RTC shift control register, Address offset: 0x2C */
+ __IO uint32_t TSTR; /*!< RTC time stamp time register, Address offset: 0x30 */
+ __IO uint32_t TSDR; /*!< RTC time stamp date register, Address offset: 0x34 */
+ __IO uint32_t TSSSR; /*!< RTC time-stamp sub second register, Address offset: 0x38 */
+ __IO uint32_t CALR; /*!< RRTC calibration register, Address offset: 0x3C */
+ __IO uint32_t TAFCR; /*!< RTC tamper and alternate function configuration register, Address offset: 0x40 */
+ __IO uint32_t ALRMASSR; /*!< RTC alarm A sub second register, Address offset: 0x44 */
+ __IO uint32_t ALRMBSSR; /*!< RTC alarm B sub second register, Address offset: 0x48 */
+ uint32_t RESERVED7; /*!< Reserved, 0x4C */
+ __IO uint32_t BKP0R; /*!< RTC backup register 0, Address offset: 0x50 */
+ __IO uint32_t BKP1R; /*!< RTC backup register 1, Address offset: 0x54 */
+ __IO uint32_t BKP2R; /*!< RTC backup register 2, Address offset: 0x58 */
+ __IO uint32_t BKP3R; /*!< RTC backup register 3, Address offset: 0x5C */
+ __IO uint32_t BKP4R; /*!< RTC backup register 4, Address offset: 0x60 */
+ __IO uint32_t BKP5R; /*!< RTC backup register 5, Address offset: 0x64 */
+ __IO uint32_t BKP6R; /*!< RTC backup register 6, Address offset: 0x68 */
+ __IO uint32_t BKP7R; /*!< RTC backup register 7, Address offset: 0x6C */
+ __IO uint32_t BKP8R; /*!< RTC backup register 8, Address offset: 0x70 */
+ __IO uint32_t BKP9R; /*!< RTC backup register 9, Address offset: 0x74 */
+ __IO uint32_t BKP10R; /*!< RTC backup register 10, Address offset: 0x78 */
+ __IO uint32_t BKP11R; /*!< RTC backup register 11, Address offset: 0x7C */
+ __IO uint32_t BKP12R; /*!< RTC backup register 12, Address offset: 0x80 */
+ __IO uint32_t BKP13R; /*!< RTC backup register 13, Address offset: 0x84 */
+ __IO uint32_t BKP14R; /*!< RTC backup register 14, Address offset: 0x88 */
+ __IO uint32_t BKP15R; /*!< RTC backup register 15, Address offset: 0x8C */
+ __IO uint32_t BKP16R; /*!< RTC backup register 16, Address offset: 0x90 */
+ __IO uint32_t BKP17R; /*!< RTC backup register 17, Address offset: 0x94 */
+ __IO uint32_t BKP18R; /*!< RTC backup register 18, Address offset: 0x98 */
+ __IO uint32_t BKP19R; /*!< RTC backup register 19, Address offset: 0x9C */
+ __IO uint32_t BKP20R; /*!< RTC backup register 20, Address offset: 0xA0 */
+ __IO uint32_t BKP21R; /*!< RTC backup register 21, Address offset: 0xA4 */
+ __IO uint32_t BKP22R; /*!< RTC backup register 22, Address offset: 0xA8 */
+ __IO uint32_t BKP23R; /*!< RTC backup register 23, Address offset: 0xAC */
+ __IO uint32_t BKP24R; /*!< RTC backup register 24, Address offset: 0xB0 */
+ __IO uint32_t BKP25R; /*!< RTC backup register 25, Address offset: 0xB4 */
+ __IO uint32_t BKP26R; /*!< RTC backup register 26, Address offset: 0xB8 */
+ __IO uint32_t BKP27R; /*!< RTC backup register 27, Address offset: 0xBC */
+ __IO uint32_t BKP28R; /*!< RTC backup register 28, Address offset: 0xC0 */
+ __IO uint32_t BKP29R; /*!< RTC backup register 29, Address offset: 0xC4 */
+ __IO uint32_t BKP30R; /*!< RTC backup register 30, Address offset: 0xC8 */
+ __IO uint32_t BKP31R; /*!< RTC backup register 31, Address offset: 0xCC */
} RTC_TypeDef;
-/**
+/**
+ * @brief SD host Interface
+ */
+
+typedef struct
+{
+ __IO uint32_t POWER; /*!< SDIO power control register, Address offset: 0x00 */
+ __IO uint32_t CLKCR; /*!< SDI clock control register, Address offset: 0x04 */
+ __IO uint32_t ARG; /*!< SDIO argument register, Address offset: 0x08 */
+ __IO uint32_t CMD; /*!< SDIO command register, Address offset: 0x0C */
+ __I uint32_t RESPCMD; /*!< SDIO command response register, Address offset: 0x10 */
+ __I uint32_t RESP1; /*!< SDIO response 1 register, Address offset: 0x14 */
+ __I uint32_t RESP2; /*!< SDIO response 2 register, Address offset: 0x18 */
+ __I uint32_t RESP3; /*!< SDIO response 3 register, Address offset: 0x1C */
+ __I uint32_t RESP4; /*!< SDIO response 4 register, Address offset: 0x20 */
+ __IO uint32_t DTIMER; /*!< SDIO data timer register, Address offset: 0x24 */
+ __IO uint32_t DLEN; /*!< SDIO data length register, Address offset: 0x28 */
+ __IO uint32_t DCTRL; /*!< SDIO data control register, Address offset: 0x2C */
+ __I uint32_t DCOUNT; /*!< SDIO data counter register, Address offset: 0x30 */
+ __I uint32_t STA; /*!< SDIO status register, Address offset: 0x34 */
+ __IO uint32_t ICR; /*!< SDIO interrupt clear register, Address offset: 0x38 */
+ __IO uint32_t MASK; /*!< SDIO mask register, Address offset: 0x3C */
+ uint32_t RESERVED0[2]; /*!< Reserved, 0x40-0x44 */
+ __I uint32_t FIFOCNT; /*!< SDIO FIFO counter register, Address offset: 0x48 */
+ uint32_t RESERVED1[13]; /*!< Reserved, 0x4C-0x7C */
+ __IO uint32_t FIFO; /*!< SDIO data FIFO register, Address offset: 0x80 */
+} SDIO_TypeDef;
+
+/**
* @brief Serial Peripheral Interface
*/
typedef struct
{
- __IO uint16_t CR1;
- uint16_t RESERVED0;
- __IO uint16_t CR2;
- uint16_t RESERVED1;
- __IO uint16_t SR;
- uint16_t RESERVED2;
- __IO uint16_t DR;
- uint16_t RESERVED3;
- __IO uint16_t CRCPR;
- uint16_t RESERVED4;
- __IO uint16_t RXCRCR;
- uint16_t RESERVED5;
- __IO uint16_t TXCRCR;
- uint16_t RESERVED6;
+ __IO uint16_t CR1; /*!< SPI control register 1 (not used in I2S mode), Address offset: 0x00 */
+ uint16_t RESERVED0; /*!< Reserved, 0x02 */
+ __IO uint16_t CR2; /*!< SPI control register 2, Address offset: 0x04 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint16_t SR; /*!< SPI status register, Address offset: 0x08 */
+ uint16_t RESERVED2; /*!< Reserved, 0x0A */
+ __IO uint16_t DR; /*!< SPI data register, Address offset: 0x0C */
+ uint16_t RESERVED3; /*!< Reserved, 0x0E */
+ __IO uint16_t CRCPR; /*!< SPI CRC polynomial register (not used in I2S mode), Address offset: 0x10 */
+ uint16_t RESERVED4; /*!< Reserved, 0x12 */
+ __IO uint16_t RXCRCR; /*!< SPI RX CRC register (not used in I2S mode), Address offset: 0x14 */
+ uint16_t RESERVED5; /*!< Reserved, 0x16 */
+ __IO uint16_t TXCRCR; /*!< SPI TX CRC register (not used in I2S mode), Address offset: 0x18 */
+ uint16_t RESERVED6; /*!< Reserved, 0x1A */
+ __IO uint16_t I2SCFGR; /*!< SPI_I2S configuration register, Address offset: 0x1C */
+ uint16_t RESERVED7; /*!< Reserved, 0x1E */
+ __IO uint16_t I2SPR; /*!< SPI_I2S prescaler register, Address offset: 0x20 */
+ uint16_t RESERVED8; /*!< Reserved, 0x22 */
} SPI_TypeDef;
-/**
+/**
* @brief TIM
*/
typedef struct
{
- __IO uint16_t CR1;
- uint16_t RESERVED0;
- __IO uint16_t CR2;
- uint16_t RESERVED1;
- __IO uint16_t SMCR;
- uint16_t RESERVED2;
- __IO uint16_t DIER;
- uint16_t RESERVED3;
- __IO uint16_t SR;
- uint16_t RESERVED4;
- __IO uint16_t EGR;
- uint16_t RESERVED5;
- __IO uint16_t CCMR1;
- uint16_t RESERVED6;
- __IO uint16_t CCMR2;
- uint16_t RESERVED7;
- __IO uint16_t CCER;
- uint16_t RESERVED8;
- __IO uint16_t CNT;
- uint16_t RESERVED9;
- __IO uint16_t PSC;
- uint16_t RESERVED10;
- __IO uint16_t ARR;
- uint16_t RESERVED11;
- uint32_t RESERVED12;
- __IO uint16_t CCR1;
- uint16_t RESERVED13;
- __IO uint16_t CCR2;
- uint16_t RESERVED14;
- __IO uint16_t CCR3;
- uint16_t RESERVED15;
- __IO uint16_t CCR4;
- uint16_t RESERVED16;
- uint32_t RESERVED17;
- __IO uint16_t DCR;
- uint16_t RESERVED18;
- __IO uint16_t DMAR;
- uint16_t RESERVED19;
- __IO uint16_t OR;
- uint16_t RESERVED20;
+ __IO uint16_t CR1; /*!< TIM control register 1, Address offset: 0x00 */
+ uint16_t RESERVED0; /*!< Reserved, 0x02 */
+ __IO uint16_t CR2; /*!< TIM control register 2, Address offset: 0x04 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint16_t SMCR; /*!< TIM slave mode control register, Address offset: 0x08 */
+ uint16_t RESERVED2; /*!< Reserved, 0x0A */
+ __IO uint16_t DIER; /*!< TIM DMA/interrupt enable register, Address offset: 0x0C */
+ uint16_t RESERVED3; /*!< Reserved, 0x0E */
+ __IO uint16_t SR; /*!< TIM status register, Address offset: 0x10 */
+ uint16_t RESERVED4; /*!< Reserved, 0x12 */
+ __IO uint16_t EGR; /*!< TIM event generation register, Address offset: 0x14 */
+ uint16_t RESERVED5; /*!< Reserved, 0x16 */
+ __IO uint16_t CCMR1; /*!< TIM capture/compare mode register 1, Address offset: 0x18 */
+ uint16_t RESERVED6; /*!< Reserved, 0x1A */
+ __IO uint16_t CCMR2; /*!< TIM capture/compare mode register 2, Address offset: 0x1C */
+ uint16_t RESERVED7; /*!< Reserved, 0x1E */
+ __IO uint16_t CCER; /*!< TIM capture/compare enable register, Address offset: 0x20 */
+ uint16_t RESERVED8; /*!< Reserved, 0x22 */
+ __IO uint32_t CNT; /*!< TIM counter register, Address offset: 0x24 */
+ __IO uint16_t PSC; /*!< TIM prescaler, Address offset: 0x28 */
+ uint16_t RESERVED10; /*!< Reserved, 0x2A */
+ __IO uint32_t ARR; /*!< TIM auto-reload register, Address offset: 0x2C */
+ uint32_t RESERVED12; /*!< Reserved, 0x30 */
+ __IO uint32_t CCR1; /*!< TIM capture/compare register 1, Address offset: 0x34 */
+ __IO uint32_t CCR2; /*!< TIM capture/compare register 2, Address offset: 0x38 */
+ __IO uint32_t CCR3; /*!< TIM capture/compare register 3, Address offset: 0x3C */
+ __IO uint32_t CCR4; /*!< TIM capture/compare register 4, Address offset: 0x40 */
+ uint32_t RESERVED17; /*!< Reserved, 0x44 */
+ __IO uint16_t DCR; /*!< TIM DMA control register, Address offset: 0x48 */
+ uint16_t RESERVED18; /*!< Reserved, 0x4A */
+ __IO uint16_t DMAR; /*!< TIM DMA address for full transfer, Address offset: 0x4C */
+ uint16_t RESERVED19; /*!< Reserved, 0x4E */
+ __IO uint16_t OR; /*!< TIM option register, Address offset: 0x50 */
+ uint16_t RESERVED20; /*!< Reserved, 0x52 */
} TIM_TypeDef;
-/**
+/**
* @brief Universal Synchronous Asynchronous Receiver Transmitter
*/
-
+
typedef struct
{
- __IO uint16_t SR;
- uint16_t RESERVED0;
- __IO uint16_t DR;
- uint16_t RESERVED1;
- __IO uint16_t BRR;
- uint16_t RESERVED2;
- __IO uint16_t CR1;
- uint16_t RESERVED3;
- __IO uint16_t CR2;
- uint16_t RESERVED4;
- __IO uint16_t CR3;
- uint16_t RESERVED5;
- __IO uint16_t GTPR;
- uint16_t RESERVED6;
+ __IO uint16_t SR; /*!< USART Status register, Address offset: 0x00 */
+ uint16_t RESERVED0; /*!< Reserved, 0x02 */
+ __IO uint16_t DR; /*!< USART Data register, Address offset: 0x04 */
+ uint16_t RESERVED1; /*!< Reserved, 0x06 */
+ __IO uint16_t BRR; /*!< USART Baud rate register, Address offset: 0x08 */
+ uint16_t RESERVED2; /*!< Reserved, 0x0A */
+ __IO uint16_t CR1; /*!< USART Control register 1, Address offset: 0x0C */
+ uint16_t RESERVED3; /*!< Reserved, 0x0E */
+ __IO uint16_t CR2; /*!< USART Control register 2, Address offset: 0x10 */
+ uint16_t RESERVED4; /*!< Reserved, 0x12 */
+ __IO uint16_t CR3; /*!< USART Control register 3, Address offset: 0x14 */
+ uint16_t RESERVED5; /*!< Reserved, 0x16 */
+ __IO uint16_t GTPR; /*!< USART Guard time and prescaler register, Address offset: 0x18 */
+ uint16_t RESERVED6; /*!< Reserved, 0x1A */
} USART_TypeDef;
-/**
+/**
* @brief Window WATCHDOG
*/
typedef struct
{
- __IO uint32_t CR;
- __IO uint32_t CFR;
- __IO uint32_t SR;
+ __IO uint32_t CR; /*!< WWDG Control register, Address offset: 0x00 */
+ __IO uint32_t CFR; /*!< WWDG Configuration register, Address offset: 0x04 */
+ __IO uint32_t SR; /*!< WWDG Status register, Address offset: 0x08 */
} WWDG_TypeDef;
/**
* @}
*/
-
+
/** @addtogroup Peripheral_memory_map
* @{
*/
@@ -708,6 +879,8 @@ typedef struct #define SRAM_BB_BASE ((uint32_t)0x22000000) /*!< SRAM base address in the bit-band region */
#define PERIPH_BB_BASE ((uint32_t)0x42000000) /*!< Peripheral base address in the bit-band region */
+#define FSMC_R_BASE ((uint32_t)0xA0000000) /*!< FSMC registers base address */
+
/*!< Peripheral memory map */
#define APB1PERIPH_BASE PERIPH_BASE
#define APB2PERIPH_BASE (PERIPH_BASE + 0x10000)
@@ -716,6 +889,7 @@ typedef struct #define TIM2_BASE (APB1PERIPH_BASE + 0x0000)
#define TIM3_BASE (APB1PERIPH_BASE + 0x0400)
#define TIM4_BASE (APB1PERIPH_BASE + 0x0800)
+#define TIM5_BASE (APB1PERIPH_BASE + 0x0C00)
#define TIM6_BASE (APB1PERIPH_BASE + 0x1000)
#define TIM7_BASE (APB1PERIPH_BASE + 0x1400)
#define LCD_BASE (APB1PERIPH_BASE + 0x2400)
@@ -723,14 +897,18 @@ typedef struct #define WWDG_BASE (APB1PERIPH_BASE + 0x2C00)
#define IWDG_BASE (APB1PERIPH_BASE + 0x3000)
#define SPI2_BASE (APB1PERIPH_BASE + 0x3800)
+#define SPI3_BASE (APB1PERIPH_BASE + 0x3C00)
#define USART2_BASE (APB1PERIPH_BASE + 0x4400)
#define USART3_BASE (APB1PERIPH_BASE + 0x4800)
+#define UART4_BASE (APB1PERIPH_BASE + 0x4C00)
+#define UART5_BASE (APB1PERIPH_BASE + 0x5000)
#define I2C1_BASE (APB1PERIPH_BASE + 0x5400)
#define I2C2_BASE (APB1PERIPH_BASE + 0x5800)
#define PWR_BASE (APB1PERIPH_BASE + 0x7000)
#define DAC_BASE (APB1PERIPH_BASE + 0x7400)
#define COMP_BASE (APB1PERIPH_BASE + 0x7C00)
#define RI_BASE (APB1PERIPH_BASE + 0x7C04)
+#define OPAMP_BASE (APB1PERIPH_BASE + 0x7C5C)
#define SYSCFG_BASE (APB2PERIPH_BASE + 0x0000)
#define EXTI_BASE (APB2PERIPH_BASE + 0x0400)
@@ -739,6 +917,7 @@ typedef struct #define TIM11_BASE (APB2PERIPH_BASE + 0x1000)
#define ADC1_BASE (APB2PERIPH_BASE + 0x2400)
#define ADC_BASE (APB2PERIPH_BASE + 0x2700)
+#define SDIO_BASE (APB2PERIPH_BASE + 0x2C00)
#define SPI1_BASE (APB2PERIPH_BASE + 0x3000)
#define USART1_BASE (APB2PERIPH_BASE + 0x3800)
@@ -748,6 +927,8 @@ typedef struct #define GPIOD_BASE (AHBPERIPH_BASE + 0x0C00)
#define GPIOE_BASE (AHBPERIPH_BASE + 0x1000)
#define GPIOH_BASE (AHBPERIPH_BASE + 0x1400)
+#define GPIOF_BASE (AHBPERIPH_BASE + 0x1800)
+#define GPIOG_BASE (AHBPERIPH_BASE + 0x1C00)
#define CRC_BASE (AHBPERIPH_BASE + 0x3000)
#define RCC_BASE (AHBPERIPH_BASE + 0x3800)
@@ -764,20 +945,32 @@ typedef struct #define DMA1_Channel6_BASE (DMA1_BASE + 0x006C)
#define DMA1_Channel7_BASE (DMA1_BASE + 0x0080)
+#define DMA2_BASE (AHBPERIPH_BASE + 0x6400)
+#define DMA2_Channel1_BASE (DMA2_BASE + 0x0008)
+#define DMA2_Channel2_BASE (DMA2_BASE + 0x001C)
+#define DMA2_Channel3_BASE (DMA2_BASE + 0x0030)
+#define DMA2_Channel4_BASE (DMA2_BASE + 0x0044)
+#define DMA2_Channel5_BASE (DMA2_BASE + 0x0058)
+
+#define AES_BASE ((uint32_t)0x50060000)
+
+#define FSMC_Bank1_R_BASE (FSMC_R_BASE + 0x0000) /*!< FSMC Bank1 registers base address */
+#define FSMC_Bank1E_R_BASE (FSMC_R_BASE + 0x0104) /*!< FSMC Bank1E registers base address */
#define DBGMCU_BASE ((uint32_t)0xE0042000) /*!< Debug MCU registers base address */
/**
* @}
*/
-
+
/** @addtogroup Peripheral_declaration
* @{
- */
+ */
#define TIM2 ((TIM_TypeDef *) TIM2_BASE)
#define TIM3 ((TIM_TypeDef *) TIM3_BASE)
#define TIM4 ((TIM_TypeDef *) TIM4_BASE)
+#define TIM5 ((TIM_TypeDef *) TIM5_BASE)
#define TIM6 ((TIM_TypeDef *) TIM6_BASE)
#define TIM7 ((TIM_TypeDef *) TIM7_BASE)
#define LCD ((LCD_TypeDef *) LCD_BASE)
@@ -785,19 +978,24 @@ typedef struct #define WWDG ((WWDG_TypeDef *) WWDG_BASE)
#define IWDG ((IWDG_TypeDef *) IWDG_BASE)
#define SPI2 ((SPI_TypeDef *) SPI2_BASE)
+#define SPI3 ((SPI_TypeDef *) SPI3_BASE)
#define USART2 ((USART_TypeDef *) USART2_BASE)
#define USART3 ((USART_TypeDef *) USART3_BASE)
+#define UART4 ((USART_TypeDef *) UART4_BASE)
+#define UART5 ((USART_TypeDef *) UART5_BASE)
#define I2C1 ((I2C_TypeDef *) I2C1_BASE)
#define I2C2 ((I2C_TypeDef *) I2C2_BASE)
#define PWR ((PWR_TypeDef *) PWR_BASE)
#define DAC ((DAC_TypeDef *) DAC_BASE)
#define COMP ((COMP_TypeDef *) COMP_BASE)
#define RI ((RI_TypeDef *) RI_BASE)
+#define OPAMP ((OPAMP_TypeDef *) OPAMP_BASE)
#define SYSCFG ((SYSCFG_TypeDef *) SYSCFG_BASE)
#define EXTI ((EXTI_TypeDef *) EXTI_BASE)
#define ADC1 ((ADC_TypeDef *) ADC1_BASE)
#define ADC ((ADC_Common_TypeDef *) ADC_BASE)
+#define SDIO ((SDIO_TypeDef *) SDIO_BASE)
#define TIM9 ((TIM_TypeDef *) TIM9_BASE)
#define TIM10 ((TIM_TypeDef *) TIM10_BASE)
#define TIM11 ((TIM_TypeDef *) TIM11_BASE)
@@ -811,6 +1009,14 @@ typedef struct #define DMA1_Channel5 ((DMA_Channel_TypeDef *) DMA1_Channel5_BASE)
#define DMA1_Channel6 ((DMA_Channel_TypeDef *) DMA1_Channel6_BASE)
#define DMA1_Channel7 ((DMA_Channel_TypeDef *) DMA1_Channel7_BASE)
+
+#define DMA2 ((DMA_TypeDef *) DMA2_BASE)
+#define DMA2_Channel1 ((DMA_Channel_TypeDef *) DMA2_Channel1_BASE)
+#define DMA2_Channel2 ((DMA_Channel_TypeDef *) DMA2_Channel2_BASE)
+#define DMA2_Channel3 ((DMA_Channel_TypeDef *) DMA2_Channel3_BASE)
+#define DMA2_Channel4 ((DMA_Channel_TypeDef *) DMA2_Channel4_BASE)
+#define DMA2_Channel5 ((DMA_Channel_TypeDef *) DMA2_Channel5_BASE)
+
#define RCC ((RCC_TypeDef *) RCC_BASE)
#define CRC ((CRC_TypeDef *) CRC_BASE)
@@ -820,9 +1026,16 @@ typedef struct #define GPIOD ((GPIO_TypeDef *) GPIOD_BASE)
#define GPIOE ((GPIO_TypeDef *) GPIOE_BASE)
#define GPIOH ((GPIO_TypeDef *) GPIOH_BASE)
+#define GPIOF ((GPIO_TypeDef *) GPIOF_BASE)
+#define GPIOG ((GPIO_TypeDef *) GPIOG_BASE)
#define FLASH ((FLASH_TypeDef *) FLASH_R_BASE)
-#define OB ((OB_TypeDef *) OB_BASE)
+#define OB ((OB_TypeDef *) OB_BASE)
+
+#define AES ((AES_TypeDef *) AES_BASE)
+
+#define FSMC_Bank1 ((FSMC_Bank1_TypeDef *) FSMC_Bank1_R_BASE)
+#define FSMC_Bank1E ((FSMC_Bank1E_TypeDef *) FSMC_Bank1E_R_BASE)
#define DBGMCU ((DBGMCU_TypeDef *) DBGMCU_BASE)
@@ -834,10 +1047,10 @@ typedef struct * @{
*/
- /** @addtogroup Peripheral_Registers_Bits_Definition
+/** @addtogroup Peripheral_Registers_Bits_Definition
* @{
*/
-
+
/******************************************************************************/
/* Peripheral Registers Bits Definition */
/******************************************************************************/
@@ -891,10 +1104,11 @@ typedef struct #define ADC_CR1_RES_1 ((uint32_t)0x02000000) /*!< Bit 1 */
#define ADC_CR1_OVRIE ((uint32_t)0x04000000) /*!< Overrun interrupt enable */
-
+
/******************* Bit definition for ADC_CR2 register ********************/
#define ADC_CR2_ADON ((uint32_t)0x00000001) /*!< A/D Converter ON / OFF */
#define ADC_CR2_CONT ((uint32_t)0x00000002) /*!< Continuous Conversion */
+#define ADC_CR2_CFG ((uint32_t)0x00000004) /*!< ADC Configuration */
#define ADC_CR2_DELS ((uint32_t)0x00000070) /*!< DELS[2:0] bits (Delay selection) */
#define ADC_CR2_DELS_0 ((uint32_t)0x00000010) /*!< Bit 0 */
@@ -961,6 +1175,26 @@ typedef struct #define ADC_SMPR1_SMP25_1 ((uint32_t)0x00010000) /*!< Bit 1 */
#define ADC_SMPR1_SMP25_2 ((uint32_t)0x00020000) /*!< Bit 2 */
+#define ADC_SMPR1_SMP26 ((uint32_t)0x001C0000) /*!< SMP26[2:0] bits (Channel 26 Sample time selection) */
+#define ADC_SMPR1_SMP26_0 ((uint32_t)0x00040000) /*!< Bit 0 */
+#define ADC_SMPR1_SMP26_1 ((uint32_t)0x00080000) /*!< Bit 1 */
+#define ADC_SMPR1_SMP26_2 ((uint32_t)0x00100000) /*!< Bit 2 */
+
+#define ADC_SMPR1_SMP27 ((uint32_t)0x00E00000) /*!< SMP27[2:0] bits (Channel 27 Sample time selection) */
+#define ADC_SMPR1_SMP27_0 ((uint32_t)0x00200000) /*!< Bit 0 */
+#define ADC_SMPR1_SMP27_1 ((uint32_t)0x00400000) /*!< Bit 1 */
+#define ADC_SMPR1_SMP27_2 ((uint32_t)0x00800000) /*!< Bit 2 */
+
+#define ADC_SMPR1_SMP28 ((uint32_t)0x07000000) /*!< SMP28[2:0] bits (Channel 28 Sample time selection) */
+#define ADC_SMPR1_SMP28_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define ADC_SMPR1_SMP28_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define ADC_SMPR1_SMP28_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+
+#define ADC_SMPR1_SMP29 ((uint32_t)0x38000000) /*!< SMP29[2:0] bits (Channel 29 Sample time selection) */
+#define ADC_SMPR1_SMP29_0 ((uint32_t)0x08000000) /*!< Bit 0 */
+#define ADC_SMPR1_SMP29_1 ((uint32_t)0x10000000) /*!< Bit 1 */
+#define ADC_SMPR1_SMP29_2 ((uint32_t)0x20000000) /*!< Bit 2 */
+
/****************** Bit definition for ADC_SMPR2 register *******************/
#define ADC_SMPR2_SMP10 ((uint32_t)0x00000007) /*!< SMP10[2:0] bits (Channel 10 Sample time selection) */
#define ADC_SMPR2_SMP10_0 ((uint32_t)0x00000001) /*!< Bit 0 */
@@ -1017,7 +1251,7 @@ typedef struct #define ADC_SMPR3_SMP0_0 ((uint32_t)0x00000001) /*!< Bit 0 */
#define ADC_SMPR3_SMP0_1 ((uint32_t)0x00000002) /*!< Bit 1 */
#define ADC_SMPR3_SMP0_2 ((uint32_t)0x00000004) /*!< Bit 2 */
-
+
#define ADC_SMPR3_SMP1 ((uint32_t)0x00000038) /*!< SMP1[2:0] bits (Channel 1 Sample time selection) */
#define ADC_SMPR3_SMP1_0 ((uint32_t)0x00000008) /*!< Bit 0 */
#define ADC_SMPR3_SMP1_1 ((uint32_t)0x00000010) /*!< Bit 1 */
@@ -1063,7 +1297,6 @@ typedef struct #define ADC_SMPR3_SMP9_1 ((uint32_t)0x10000000) /*!< Bit 1 */
#define ADC_SMPR3_SMP9_2 ((uint32_t)0x20000000) /*!< Bit 2 */
-
/****************** Bit definition for ADC_JOFR1 register *******************/
#define ADC_JOFR1_JOFFSET1 ((uint32_t)0x00000FFF) /*!< Data offset for injected channel 1 */
@@ -1083,19 +1316,18 @@ typedef struct #define ADC_LTR_LT ((uint32_t)0x00000FFF) /*!< Analog watchdog low threshold */
/******************* Bit definition for ADC_SQR1 register *******************/
-#define ADC_SQR1_SQ25 ((uint32_t)0x0000001F) /*!< SQ25[4:0] bits (25th conversion in regular sequence) */
-#define ADC_SQR1_SQ25_0 ((uint32_t)0x00000001) /*!< Bit 0 */
-#define ADC_SQR1_SQ25_1 ((uint32_t)0x00000002) /*!< Bit 1 */
-#define ADC_SQR1_SQ25_2 ((uint32_t)0x00000004) /*!< Bit 2 */
-#define ADC_SQR1_SQ25_3 ((uint32_t)0x00000008) /*!< Bit 3 */
-#define ADC_SQR1_SQ25_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+#define ADC_SQR1_L ((uint32_t)0x00F00000) /*!< L[3:0] bits (Regular channel sequence length) */
+#define ADC_SQR1_L_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define ADC_SQR1_L_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define ADC_SQR1_L_2 ((uint32_t)0x00400000) /*!< Bit 2 */
+#define ADC_SQR1_L_3 ((uint32_t)0x00800000) /*!< Bit 3 */
-#define ADC_SQR1_SQ26 ((uint32_t)0x000003E0) /*!< SQ26[4:0] bits (26th conversion in regular sequence) */
-#define ADC_SQR1_SQ26_0 ((uint32_t)0x00000020) /*!< Bit 0 */
-#define ADC_SQR1_SQ26_1 ((uint32_t)0x00000040) /*!< Bit 1 */
-#define ADC_SQR1_SQ26_2 ((uint32_t)0x00000080) /*!< Bit 2 */
-#define ADC_SQR1_SQ26_3 ((uint32_t)0x00000100) /*!< Bit 3 */
-#define ADC_SQR1_SQ26_4 ((uint32_t)0x00000200) /*!< Bit 4 */
+#define ADC_SQR1_SQ28 ((uint32_t)0x000F8000) /*!< SQ28[4:0] bits (25th conversion in regular sequence) */
+#define ADC_SQR1_SQ28_0 ((uint32_t)0x00008000) /*!< Bit 0 */
+#define ADC_SQR1_SQ28_1 ((uint32_t)0x00010000) /*!< Bit 1 */
+#define ADC_SQR1_SQ28_2 ((uint32_t)0x00020000) /*!< Bit 2 */
+#define ADC_SQR1_SQ28_3 ((uint32_t)0x00040000) /*!< Bit 3 */
+#define ADC_SQR1_SQ28_4 ((uint32_t)0x00080000) /*!< Bit 4 */
#define ADC_SQR1_SQ27 ((uint32_t)0x00007C00) /*!< SQ27[4:0] bits (27th conversion in regular sequence) */
#define ADC_SQR1_SQ27_0 ((uint32_t)0x00000400) /*!< Bit 0 */
@@ -1104,11 +1336,19 @@ typedef struct #define ADC_SQR1_SQ27_3 ((uint32_t)0x00002000) /*!< Bit 3 */
#define ADC_SQR1_SQ27_4 ((uint32_t)0x00004000) /*!< Bit 4 */
-#define ADC_SQR1_L ((uint32_t)0x00F00000) /*!< L[3:0] bits (Regular channel sequence length) */
-#define ADC_SQR1_L_0 ((uint32_t)0x00100000) /*!< Bit 0 */
-#define ADC_SQR1_L_1 ((uint32_t)0x00200000) /*!< Bit 1 */
-#define ADC_SQR1_L_2 ((uint32_t)0x00400000) /*!< Bit 2 */
-#define ADC_SQR1_L_3 ((uint32_t)0x00800000) /*!< Bit 3 */
+#define ADC_SQR1_SQ26 ((uint32_t)0x000003E0) /*!< SQ26[4:0] bits (26th conversion in regular sequence) */
+#define ADC_SQR1_SQ26_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define ADC_SQR1_SQ26_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+#define ADC_SQR1_SQ26_2 ((uint32_t)0x00000080) /*!< Bit 2 */
+#define ADC_SQR1_SQ26_3 ((uint32_t)0x00000100) /*!< Bit 3 */
+#define ADC_SQR1_SQ26_4 ((uint32_t)0x00000200) /*!< Bit 4 */
+
+#define ADC_SQR1_SQ25 ((uint32_t)0x0000001F) /*!< SQ25[4:0] bits (25th conversion in regular sequence) */
+#define ADC_SQR1_SQ25_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_SQR1_SQ25_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_SQR1_SQ25_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define ADC_SQR1_SQ25_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define ADC_SQR1_SQ25_4 ((uint32_t)0x00000010) /*!< Bit 4 */
/******************* Bit definition for ADC_SQR2 register *******************/
#define ADC_SQR2_SQ19 ((uint32_t)0x0000001F) /*!< SQ19[4:0] bits (19th conversion in regular sequence) */
@@ -1284,7 +1524,7 @@ typedef struct /******************* Bit definition for ADC_JSQR register *******************/
-#define ADC_JSQR_JSQ1 ((uint32_t)0x0000001F) /*!< JSQ1[4:0] bits (1st conversion in injected sequence) */
+#define ADC_JSQR_JSQ1 ((uint32_t)0x0000001F) /*!< JSQ1[4:0] bits (1st conversion in injected sequence) */
#define ADC_JSQR_JSQ1_0 ((uint32_t)0x00000001) /*!< Bit 0 */
#define ADC_JSQR_JSQ1_1 ((uint32_t)0x00000002) /*!< Bit 1 */
#define ADC_JSQR_JSQ1_2 ((uint32_t)0x00000004) /*!< Bit 2 */
@@ -1331,6 +1571,16 @@ typedef struct /******************** Bit definition for ADC_DR register ********************/
#define ADC_DR_DATA ((uint32_t)0x0000FFFF) /*!< Regular data */
+/****************** Bit definition for ADC_SMPR0 register *******************/
+#define ADC_SMPR3_SMP30 ((uint32_t)0x00000007) /*!< SMP30[2:0] bits (Channel 30 Sample time selection) */
+#define ADC_SMPR3_SMP30_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define ADC_SMPR3_SMP30_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define ADC_SMPR3_SMP30_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+
+#define ADC_SMPR3_SMP31 ((uint32_t)0x00000038) /*!< SMP31[2:0] bits (Channel 31 Sample time selection) */
+#define ADC_SMPR3_SMP31_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define ADC_SMPR3_SMP31_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+#define ADC_SMPR3_SMP31_2 ((uint32_t)0x00000020) /*!< Bit 2 */
/******************* Bit definition for ADC_CSR register ********************/
#define ADC_CSR_AWD1 ((uint32_t)0x00000001) /*!< ADC1 Analog watchdog flag */
@@ -1344,11 +1594,72 @@ typedef struct /******************* Bit definition for ADC_CCR register ********************/
#define ADC_CCR_ADCPRE ((uint32_t)0x00030000) /*!< ADC prescaler*/
#define ADC_CCR_ADCPRE_0 ((uint32_t)0x00010000) /*!< Bit 0 */
-#define ADC_CCR_ADCPRE_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define ADC_CCR_ADCPRE_1 ((uint32_t)0x00020000) /*!< Bit 1 */
#define ADC_CCR_TSVREFE ((uint32_t)0x00800000) /*!< Temperature Sensor and VREFINT Enable */
/******************************************************************************/
/* */
+/* Advanced Encryption Standard (AES) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for AES_CR register *********************/
+#define AES_CR_EN ((uint32_t)0x00000001) /*!< AES Enable */
+#define AES_CR_DATATYPE ((uint32_t)0x00000006) /*!< Data type selection */
+#define AES_CR_DATATYPE_0 ((uint32_t)0x00000002) /*!< Bit 0 */
+#define AES_CR_DATATYPE_1 ((uint32_t)0x00000004) /*!< Bit 1 */
+
+#define AES_CR_MODE ((uint32_t)0x00000018) /*!< AES Mode Of Operation */
+#define AES_CR_MODE_0 ((uint32_t)0x00000008) /*!< Bit 0 */
+#define AES_CR_MODE_1 ((uint32_t)0x00000010) /*!< Bit 1 */
+
+#define AES_CR_CHMOD ((uint32_t)0x00000060) /*!< AES Chaining Mode */
+#define AES_CR_CHMOD_0 ((uint32_t)0x00000020) /*!< Bit 0 */
+#define AES_CR_CHMOD_1 ((uint32_t)0x00000040) /*!< Bit 1 */
+
+#define AES_CR_CCFC ((uint32_t)0x00000080) /*!< Computation Complete Flag Clear */
+#define AES_CR_ERRC ((uint32_t)0x00000100) /*!< Error Clear */
+#define AES_CR_CCIE ((uint32_t)0x00000200) /*!< Computation Complete Interrupt Enable */
+#define AES_CR_ERRIE ((uint32_t)0x00000400) /*!< Error Interrupt Enable */
+#define AES_CR_DMAINEN ((uint32_t)0x00000800) /*!< DMA ENable managing the data input phase */
+#define AES_CR_DMAOUTEN ((uint32_t)0x00001000) /*!< DMA Enable managing the data output phase */
+
+/******************* Bit definition for AES_SR register *********************/
+#define AES_SR_CCF ((uint32_t)0x00000001) /*!< Computation Complete Flag */
+#define AES_SR_RDERR ((uint32_t)0x00000002) /*!< Read Error Flag */
+#define AES_SR_WRERR ((uint32_t)0x00000004) /*!< Write Error Flag */
+
+/******************* Bit definition for AES_DINR register *******************/
+#define AES_DINR ((uint32_t)0x0000FFFF) /*!< AES Data Input Register */
+
+/******************* Bit definition for AES_DOUTR register ******************/
+#define AES_DOUTR ((uint32_t)0x0000FFFF) /*!< AES Data Output Register */
+
+/******************* Bit definition for AES_KEYR0 register ******************/
+#define AES_KEYR0 ((uint32_t)0x0000FFFF) /*!< AES Key Register 0 */
+
+/******************* Bit definition for AES_KEYR1 register ******************/
+#define AES_KEYR1 ((uint32_t)0x0000FFFF) /*!< AES Key Register 1 */
+
+/******************* Bit definition for AES_KEYR2 register ******************/
+#define AES_KEYR2 ((uint32_t)0x0000FFFF) /*!< AES Key Register 2 */
+
+/******************* Bit definition for AES_KEYR3 register ******************/
+#define AES_KEYR3 ((uint32_t)0x0000FFFF) /*!< AES Key Register 3 */
+
+/******************* Bit definition for AES_IVR0 register *******************/
+#define AES_IVR0 ((uint32_t)0x0000FFFF) /*!< AES Initialization Vector Register 0 */
+
+/******************* Bit definition for AES_IVR1 register *******************/
+#define AES_IVR1 ((uint32_t)0x0000FFFF) /*!< AES Initialization Vector Register 1 */
+
+/******************* Bit definition for AES_IVR2 register *******************/
+#define AES_IVR2 ((uint32_t)0x0000FFFF) /*!< AES Initialization Vector Register 2 */
+
+/******************* Bit definition for AES_IVR3 register *******************/
+#define AES_IVR3 ((uint32_t)0x0000FFFF) /*!< AES Initialization Vector Register 3 */
+
+/******************************************************************************/
+/* */
/* Analog Comparators (COMP) */
/* */
/******************************************************************************/
@@ -1360,6 +1671,7 @@ typedef struct #define COMP_CSR_400KPD ((uint32_t)0x00000008) /*!< 400K pull-down resistor */
#define COMP_CSR_CMP1EN ((uint32_t)0x00000010) /*!< Comparator 1 enable */
+#define COMP_CSR_SW1 ((uint32_t)0x00000020) /*!< SW1 analog switch enable */
#define COMP_CSR_CMP1OUT ((uint32_t)0x00000080) /*!< Comparator 1 output */
#define COMP_CSR_SPEED ((uint32_t)0x00001000) /*!< Comparator 2 speed */
@@ -1378,6 +1690,64 @@ typedef struct #define COMP_CSR_OUTSEL_1 ((uint32_t)0x00400000) /*!< Bit 1 */
#define COMP_CSR_OUTSEL_2 ((uint32_t)0x00800000) /*!< Bit 2 */
+#define COMP_CSR_FCH3 ((uint32_t)0x04000000) /*!< Bit 26 */
+#define COMP_CSR_FCH8 ((uint32_t)0x08000000) /*!< Bit 27 */
+#define COMP_CSR_RCH13 ((uint32_t)0x10000000) /*!< Bit 28 */
+
+#define COMP_CSR_CAIE ((uint32_t)0x20000000) /*!< Bit 29 */
+#define COMP_CSR_CAIF ((uint32_t)0x40000000) /*!< Bit 30 */
+#define COMP_CSR_TSUSP ((uint32_t)0x80000000) /*!< Bit 31 */
+
+/******************************************************************************/
+/* */
+/* Operational Amplifier (OPAMP) */
+/* */
+/******************************************************************************/
+/******************* Bit definition for OPAMP_CSR register ******************/
+#define OPAMP_CSR_OPA1PD ((uint32_t)0x00000001) /*!< OPAMP1 disable */
+#define OPAMP_CSR_S3SEL1 ((uint32_t)0x00000002) /*!< Switch 3 for OPAMP1 Enable */
+#define OPAMP_CSR_S4SEL1 ((uint32_t)0x00000004) /*!< Switch 4 for OPAMP1 Enable */
+#define OPAMP_CSR_S5SEL1 ((uint32_t)0x00000008) /*!< Switch 5 for OPAMP1 Enable */
+#define OPAMP_CSR_S6SEL1 ((uint32_t)0x00000010) /*!< Switch 6 for OPAMP1 Enable */
+#define OPAMP_CSR_OPA1CAL_L ((uint32_t)0x00000020) /*!< OPAMP1 Offset calibration for P differential pair */
+#define OPAMP_CSR_OPA1CAL_H ((uint32_t)0x00000040) /*!< OPAMP1 Offset calibration for N differential pair */
+#define OPAMP_CSR_OPA1LPM ((uint32_t)0x00000080) /*!< OPAMP1 Low power enable */
+#define OPAMP_CSR_OPA2PD ((uint32_t)0x00000100) /*!< OPAMP2 disable */
+#define OPAMP_CSR_S3SEL2 ((uint32_t)0x00000200) /*!< Switch 3 for OPAMP2 Enable */
+#define OPAMP_CSR_S4SEL2 ((uint32_t)0x00000400) /*!< Switch 4 for OPAMP2 Enable */
+#define OPAMP_CSR_S5SEL2 ((uint32_t)0x00000800) /*!< Switch 5 for OPAMP2 Enable */
+#define OPAMP_CSR_S6SEL2 ((uint32_t)0x00001000) /*!< Switch 6 for OPAMP2 Enable */
+#define OPAMP_CSR_OPA2CAL_L ((uint32_t)0x00002000) /*!< OPAMP2 Offset calibration for P differential pair */
+#define OPAMP_CSR_OPA2CAL_H ((uint32_t)0x00004000) /*!< OPAMP2 Offset calibration for N differential pair */
+#define OPAMP_CSR_OPA2LPM ((uint32_t)0x00008000) /*!< OPAMP2 Low power enable */
+#define OPAMP_CSR_OPA3PD ((uint32_t)0x00010000) /*!< OPAMP3 disable */
+#define OPAMP_CSR_S3SEL3 ((uint32_t)0x00020000) /*!< Switch 3 for OPAMP3 Enable */
+#define OPAMP_CSR_S4SEL3 ((uint32_t)0x00040000) /*!< Switch 4 for OPAMP3 Enable */
+#define OPAMP_CSR_S5SEL3 ((uint32_t)0x00080000) /*!< Switch 5 for OPAMP3 Enable */
+#define OPAMP_CSR_S6SEL3 ((uint32_t)0x00100000) /*!< Switch 6 for OPAMP3 Enable */
+#define OPAMP_CSR_OPA3CAL_L ((uint32_t)0x00200000) /*!< OPAMP3 Offset calibration for P differential pair */
+#define OPAMP_CSR_OPA3CAL_H ((uint32_t)0x00400000) /*!< OPAMP3 Offset calibration for N differential pair */
+#define OPAMP_CSR_OPA3LPM ((uint32_t)0x00800000) /*!< OPAMP3 Low power enable */
+#define OPAMP_CSR_ANAWSEL1 ((uint32_t)0x01000000) /*!< Switch ANA Enable for OPAMP1 */
+#define OPAMP_CSR_ANAWSEL2 ((uint32_t)0x02000000) /*!< Switch ANA Enable for OPAMP2 */
+#define OPAMP_CSR_ANAWSEL3 ((uint32_t)0x04000000) /*!< Switch ANA Enable for OPAMP3 */
+#define OPAMP_CSR_S7SEL2 ((uint32_t)0x08000000) /*!< Switch 7 for OPAMP2 Enable */
+#define OPAMP_CSR_AOP_RANGE ((uint32_t)0x10000000) /*!< Power range selection */
+#define OPAMP_CSR_OPA1CALOUT ((uint32_t)0x20000000) /*!< OPAMP1 calibration output */
+#define OPAMP_CSR_OPA2CALOUT ((uint32_t)0x40000000) /*!< OPAMP2 calibration output */
+#define OPAMP_CSR_OPA3CALOUT ((uint32_t)0x80000000) /*!< OPAMP3 calibration output */
+
+/******************* Bit definition for OPAMP_OTR register ******************/
+#define OPAMP_OTR_AO1_OPT_OFFSET_TRIM ((uint32_t)0x000003FF) /*!< Offset trim for OPAMP1 */
+#define OPAMP_OTR_AO2_OPT_OFFSET_TRIM ((uint32_t)0x000FFC00) /*!< Offset trim for OPAMP2 */
+#define OPAMP_OTR_AO3_OPT_OFFSET_TRIM ((uint32_t)0x3FF00000) /*!< Offset trim for OPAMP2 */
+#define OPAMP_OTR_OT_USER ((uint32_t)0x80000000) /*!< Switch to OPAMP offset user trimmed values */
+
+/******************* Bit definition for OPAMP_LPOTR register ****************/
+#define OPAMP_LP_OTR_AO1_OPT_OFFSET_TRIM_LP ((uint32_t)0x000003FF) /*!< Offset trim in low power for OPAMP1 */
+#define OPAMP_LP_OTR_AO2_OPT_OFFSET_TRIM_LP ((uint32_t)0x000FFC00) /*!< Offset trim in low power for OPAMP2 */
+#define OPAMP_LP_OTR_AO3_OPT_OFFSET_TRIM_LP ((uint32_t)0x3FF00000) /*!< Offset trim in low power for OPAMP3 */
+
/******************************************************************************/
/* */
/* CRC calculation unit (CRC) */
@@ -1385,13 +1755,13 @@ typedef struct /******************************************************************************/
/******************* Bit definition for CRC_DR register *********************/
-#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
+#define CRC_DR_DR ((uint32_t)0xFFFFFFFF) /*!< Data register bits */
/******************* Bit definition for CRC_IDR register ********************/
-#define CRC_IDR_IDR ((uint8_t)0xFF) /*!< General-purpose 8-bit data register bits */
+#define CRC_IDR_IDR ((uint8_t)0xFF) /*!< General-purpose 8-bit data register bits */
/******************** Bit definition for CRC_CR register ********************/
-#define CRC_CR_RESET ((uint32_t)0x00000001) /*!< RESET bit */
+#define CRC_CR_RESET ((uint32_t)0x00000001) /*!< RESET bit */
/******************************************************************************/
/* */
@@ -1420,6 +1790,7 @@ typedef struct #define DAC_CR_MAMP1_3 ((uint32_t)0x00000800) /*!<Bit 3 */
#define DAC_CR_DMAEN1 ((uint32_t)0x00001000) /*!<DAC channel1 DMA enable */
+#define DAC_CR_DMAUDRIE1 ((uint32_t)0x00002000) /*!<DAC channel1 DMA underrun interrupt enable */
#define DAC_CR_EN2 ((uint32_t)0x00010000) /*!<DAC channel2 enable */
#define DAC_CR_BOFF2 ((uint32_t)0x00020000) /*!<DAC channel2 output buffer disable */
#define DAC_CR_TEN2 ((uint32_t)0x00040000) /*!<DAC channel2 Trigger enable */
@@ -1440,7 +1811,7 @@ typedef struct #define DAC_CR_MAMP2_3 ((uint32_t)0x08000000) /*!<Bit 3 */
#define DAC_CR_DMAEN2 ((uint32_t)0x10000000) /*!<DAC channel2 DMA enabled */
-
+#define DAC_CR_DMAUDRIE2 ((uint32_t)0x20000000) /*!<DAC channel2 DMA underrun interrupt enable */
/***************** Bit definition for DAC_SWTRIGR register ******************/
#define DAC_SWTRIGR_SWTRIG1 ((uint8_t)0x01) /*!<DAC channel1 software trigger */
#define DAC_SWTRIGR_SWTRIG2 ((uint8_t)0x02) /*!<DAC channel2 software trigger */
@@ -1524,21 +1895,23 @@ typedef struct /****************** Bit definition for DBGMCU_APB1_FZ register **************/
-#define DBGMCU_APB1_FZ_DBG_TIM2_STOP ((uint32_t)0x00000001) /*!< TIM2 counter stopped when core is halted */
-#define DBGMCU_APB1_FZ_DBG_TIM3_STOP ((uint32_t)0x00000002) /*!< TIM3 counter stopped when core is halted */
-#define DBGMCU_APB1_FZ_DBG_TIM4_STOP ((uint32_t)0x00000004) /*!< TIM4 counter stopped when core is halted */
-#define DBGMCU_APB1_FZ_DBG_TIM6_STOP ((uint32_t)0x00000010) /*!< TIM6 counter stopped when core is halted */
-#define DBGMCU_APB1_FZ_DBG_TIM7_STOP ((uint32_t)0x00000020) /*!< TIM7 counter stopped when core is halted */
-#define DBGMCU_APB1_FZ_DBG_WWDG_STOP ((uint32_t)0x00000800) /*!< Debug Window Watchdog stopped when Core is halted */
-#define DBGMCU_APB1_FZ_DBG_IWDG_STOP ((uint32_t)0x00001000) /*!< Debug Independent Watchdog stopped when Core is halted */
-#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000) /*!< SMBUS timeout mode stopped when Core is halted */
-#define DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00400000) /*!< SMBUS timeout mode stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM2_STOP ((uint32_t)0x00000001) /*!< TIM2 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM3_STOP ((uint32_t)0x00000002) /*!< TIM3 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM4_STOP ((uint32_t)0x00000004) /*!< TIM4 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM5_STOP ((uint32_t)0x00000008) /*!< TIM5 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM6_STOP ((uint32_t)0x00000010) /*!< TIM6 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_TIM7_STOP ((uint32_t)0x00000020) /*!< TIM7 counter stopped when core is halted */
+#define DBGMCU_APB1_FZ_DBG_RTC_STOP ((uint32_t)0x00000400) /*!< RTC Counter stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_WWDG_STOP ((uint32_t)0x00000800) /*!< Debug Window Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_IWDG_STOP ((uint32_t)0x00001000) /*!< Debug Independent Watchdog stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT ((uint32_t)0x00200000) /*!< SMBUS timeout mode stopped when Core is halted */
+#define DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT ((uint32_t)0x00400000) /*!< SMBUS timeout mode stopped when Core is halted */
/****************** Bit definition for DBGMCU_APB2_FZ register **************/
-#define DBGMCU_APB2_FZ_DBG_TIM9_STOP ((uint32_t)0x00000004) /*!< TIM9 counter stopped when core is halted */
-#define DBGMCU_APB2_FZ_DBG_TIM10_STOP ((uint32_t)0x00000008) /*!< TIM10 counter stopped when core is halted */
-#define DBGMCU_APB2_FZ_DBG_TIM11_STOP ((uint32_t)0x00000010) /*!< TIM11 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM9_STOP ((uint32_t)0x00000004) /*!< TIM9 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM10_STOP ((uint32_t)0x00000008) /*!< TIM10 counter stopped when core is halted */
+#define DBGMCU_APB2_FZ_DBG_TIM11_STOP ((uint32_t)0x00000010) /*!< TIM11 counter stopped when core is halted */
/******************************************************************************/
/* */
@@ -1870,6 +2243,7 @@ typedef struct #define EXTI_IMR_MR20 ((uint32_t)0x00100000) /*!< Interrupt Mask on line 20 */
#define EXTI_IMR_MR21 ((uint32_t)0x00200000) /*!< Interrupt Mask on line 21 */
#define EXTI_IMR_MR22 ((uint32_t)0x00400000) /*!< Interrupt Mask on line 22 */
+#define EXTI_IMR_MR23 ((uint32_t)0x00800000) /*!< Interrupt Mask on line 23 */
/******************* Bit definition for EXTI_EMR register *******************/
#define EXTI_EMR_MR0 ((uint32_t)0x00000001) /*!< Event Mask on line 0 */
@@ -1895,6 +2269,7 @@ typedef struct #define EXTI_EMR_MR20 ((uint32_t)0x00100000) /*!< Event Mask on line 20 */
#define EXTI_EMR_MR21 ((uint32_t)0x00200000) /*!< Event Mask on line 21 */
#define EXTI_EMR_MR22 ((uint32_t)0x00400000) /*!< Event Mask on line 22 */
+#define EXTI_EMR_MR23 ((uint32_t)0x00800000) /*!< Event Mask on line 23 */
/****************** Bit definition for EXTI_RTSR register *******************/
#define EXTI_RTSR_TR0 ((uint32_t)0x00000001) /*!< Rising trigger event configuration bit of line 0 */
@@ -1920,6 +2295,7 @@ typedef struct #define EXTI_RTSR_TR20 ((uint32_t)0x00100000) /*!< Rising trigger event configuration bit of line 20 */
#define EXTI_RTSR_TR21 ((uint32_t)0x00200000) /*!< Rising trigger event configuration bit of line 21 */
#define EXTI_RTSR_TR22 ((uint32_t)0x00400000) /*!< Rising trigger event configuration bit of line 22 */
+#define EXTI_RTSR_TR23 ((uint32_t)0x00800000) /*!< Rising trigger event configuration bit of line 23 */
/****************** Bit definition for EXTI_FTSR register *******************/
#define EXTI_FTSR_TR0 ((uint32_t)0x00000001) /*!< Falling trigger event configuration bit of line 0 */
@@ -1945,6 +2321,7 @@ typedef struct #define EXTI_FTSR_TR20 ((uint32_t)0x00100000) /*!< Falling trigger event configuration bit of line 20 */
#define EXTI_FTSR_TR21 ((uint32_t)0x00200000) /*!< Falling trigger event configuration bit of line 21 */
#define EXTI_FTSR_TR22 ((uint32_t)0x00400000) /*!< Falling trigger event configuration bit of line 22 */
+#define EXTI_FTSR_TR23 ((uint32_t)0x00800000) /*!< Falling trigger event configuration bit of line 23 */
/****************** Bit definition for EXTI_SWIER register ******************/
#define EXTI_SWIER_SWIER0 ((uint32_t)0x00000001) /*!< Software Interrupt on line 0 */
@@ -1970,6 +2347,7 @@ typedef struct #define EXTI_SWIER_SWIER20 ((uint32_t)0x00100000) /*!< Software Interrupt on line 20 */
#define EXTI_SWIER_SWIER21 ((uint32_t)0x00200000) /*!< Software Interrupt on line 21 */
#define EXTI_SWIER_SWIER22 ((uint32_t)0x00400000) /*!< Software Interrupt on line 22 */
+#define EXTI_SWIER_SWIER23 ((uint32_t)0x00800000) /*!< Software Interrupt on line 23 */
/******************* Bit definition for EXTI_PR register ********************/
#define EXTI_PR_PR0 ((uint32_t)0x00000001) /*!< Pending bit 0 */
@@ -1995,6 +2373,7 @@ typedef struct #define EXTI_PR_PR20 ((uint32_t)0x00100000) /*!< Pending bit 20 */
#define EXTI_PR_PR21 ((uint32_t)0x00200000) /*!< Pending bit 21 */
#define EXTI_PR_PR22 ((uint32_t)0x00400000) /*!< Pending bit 22 */
+#define EXTI_PR_PR23 ((uint32_t)0x00800000) /*!< Pending bit 23 */
/******************************************************************************/
/* */
@@ -2019,9 +2398,10 @@ typedef struct #define FLASH_PECR_FTDW ((uint32_t)0x00000100) /*!< Fixed Time Data write for Word/Half Word/Byte programming */
#define FLASH_PECR_ERASE ((uint32_t)0x00000200) /*!< Page erasing mode */
#define FLASH_PECR_FPRG ((uint32_t)0x00000400) /*!< Fast Page/Half Page programming mode */
-#define FLASH_PECR_EOPIE ((uint32_t)0x00010000) /*!< End of programming interrupt */
-#define FLASH_PECR_ERRIE ((uint32_t)0x00020000) /*!< Error interrupt */
-#define FLASH_PECR_OBL_LAUNCH ((uint32_t)0x00040000) /*!< Launch the option byte loading */
+#define FLASH_PECR_PARALLBANK ((uint32_t)0x00008000) /*!< Parallel Bank mode */
+#define FLASH_PECR_EOPIE ((uint32_t)0x00010000) /*!< End of programming interrupt */
+#define FLASH_PECR_ERRIE ((uint32_t)0x00020000) /*!< Error interrupt */
+#define FLASH_PECR_OBL_LAUNCH ((uint32_t)0x00040000) /*!< Launch the option byte loading */
/****************** Bit definition for FLASH_PDKEYR register ******************/
#define FLASH_PDKEYR_PDKEYR ((uint32_t)0xFFFFFFFF) /*!< FLASH_PEC and data matrix Key */
@@ -2045,6 +2425,7 @@ typedef struct #define FLASH_SR_PGAERR ((uint32_t)0x00000200) /*!< Programming Alignment Error */
#define FLASH_SR_SIZERR ((uint32_t)0x00000400) /*!< Size error */
#define FLASH_SR_OPTVERR ((uint32_t)0x00000800) /*!< Option validity error */
+#define FLASH_SR_OPTVERRUSR ((uint32_t)0x00001000) /*!< Option User validity error */
/****************** Bit definition for FLASH_OBR register *******************/
#define FLASH_OBR_RDPRT ((uint16_t)0x000000AA) /*!< Read Protection */
@@ -2053,16 +2434,423 @@ typedef struct #define FLASH_OBR_IWDG_SW ((uint32_t)0x00100000) /*!< IWDG_SW */
#define FLASH_OBR_nRST_STOP ((uint32_t)0x00200000) /*!< nRST_STOP */
#define FLASH_OBR_nRST_STDBY ((uint32_t)0x00400000) /*!< nRST_STDBY */
+#define FLASH_OBR_nRST_BFB2 ((uint32_t)0x00800000) /*!< BFB2 */
/****************** Bit definition for FLASH_WRPR register ******************/
#define FLASH_WRPR_WRP ((uint32_t)0xFFFFFFFF) /*!< Write Protect */
+/****************** Bit definition for FLASH_WRPR1 register *****************/
+#define FLASH_WRPR1_WRP ((uint32_t)0xFFFFFFFF) /*!< Write Protect */
+
+/****************** Bit definition for FLASH_WRPR2 register *****************/
+#define FLASH_WRPR2_WRP ((uint32_t)0xFFFFFFFF) /*!< Write Protect */
+/******************************************************************************/
+/* */
+/* Flexible Static Memory Controller */
+/* */
+/******************************************************************************/
+/****************** Bit definition for FSMC_BCR1 register *******************/
+#define FSMC_BCR1_MBKEN ((uint32_t)0x00000001) /*!< Memory bank enable bit */
+#define FSMC_BCR1_MUXEN ((uint32_t)0x00000002) /*!< Address/data multiplexing enable bit */
+
+#define FSMC_BCR1_MTYP ((uint32_t)0x0000000C) /*!< MTYP[1:0] bits (Memory type) */
+#define FSMC_BCR1_MTYP_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define FSMC_BCR1_MTYP_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define FSMC_BCR1_MWID ((uint32_t)0x00000030) /*!< MWID[1:0] bits (Memory data bus width) */
+#define FSMC_BCR1_MWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define FSMC_BCR1_MWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+
+#define FSMC_BCR1_FACCEN ((uint32_t)0x00000040) /*!< Flash access enable */
+#define FSMC_BCR1_BURSTEN ((uint32_t)0x00000100) /*!< Burst enable bit */
+#define FSMC_BCR1_WAITPOL ((uint32_t)0x00000200) /*!< Wait signal polarity bit */
+#define FSMC_BCR1_WRAPMOD ((uint32_t)0x00000400) /*!< Wrapped burst mode support */
+#define FSMC_BCR1_WAITCFG ((uint32_t)0x00000800) /*!< Wait timing configuration */
+#define FSMC_BCR1_WREN ((uint32_t)0x00001000) /*!< Write enable bit */
+#define FSMC_BCR1_WAITEN ((uint32_t)0x00002000) /*!< Wait enable bit */
+#define FSMC_BCR1_EXTMOD ((uint32_t)0x00004000) /*!< Extended mode enable */
+#define FSMC_BCR1_ASYNCWAIT ((uint32_t)0x00008000) /*!< Asynchronous wait */
+#define FSMC_BCR1_CBURSTRW ((uint32_t)0x00080000) /*!< Write burst enable */
+
+/****************** Bit definition for FSMC_BCR2 register *******************/
+#define FSMC_BCR2_MBKEN ((uint32_t)0x00000001) /*!< Memory bank enable bit */
+#define FSMC_BCR2_MUXEN ((uint32_t)0x00000002) /*!< Address/data multiplexing enable bit */
+
+#define FSMC_BCR2_MTYP ((uint32_t)0x0000000C) /*!< MTYP[1:0] bits (Memory type) */
+#define FSMC_BCR2_MTYP_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define FSMC_BCR2_MTYP_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define FSMC_BCR2_MWID ((uint32_t)0x00000030) /*!< MWID[1:0] bits (Memory data bus width) */
+#define FSMC_BCR2_MWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define FSMC_BCR2_MWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+
+#define FSMC_BCR2_FACCEN ((uint32_t)0x00000040) /*!< Flash access enable */
+#define FSMC_BCR2_BURSTEN ((uint32_t)0x00000100) /*!< Burst enable bit */
+#define FSMC_BCR2_WAITPOL ((uint32_t)0x00000200) /*!< Wait signal polarity bit */
+#define FSMC_BCR2_WRAPMOD ((uint32_t)0x00000400) /*!< Wrapped burst mode support */
+#define FSMC_BCR2_WAITCFG ((uint32_t)0x00000800) /*!< Wait timing configuration */
+#define FSMC_BCR2_WREN ((uint32_t)0x00001000) /*!< Write enable bit */
+#define FSMC_BCR2_WAITEN ((uint32_t)0x00002000) /*!< Wait enable bit */
+#define FSMC_BCR2_EXTMOD ((uint32_t)0x00004000) /*!< Extended mode enable */
+#define FSMC_BCR2_ASYNCWAIT ((uint32_t)0x00008000) /*!< Asynchronous wait */
+#define FSMC_BCR2_CBURSTRW ((uint32_t)0x00080000) /*!< Write burst enable */
+
+/****************** Bit definition for FSMC_BCR3 register *******************/
+#define FSMC_BCR3_MBKEN ((uint32_t)0x00000001) /*!< Memory bank enable bit */
+#define FSMC_BCR3_MUXEN ((uint32_t)0x00000002) /*!< Address/data multiplexing enable bit */
+
+#define FSMC_BCR3_MTYP ((uint32_t)0x0000000C) /*!< MTYP[1:0] bits (Memory type) */
+#define FSMC_BCR3_MTYP_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define FSMC_BCR3_MTYP_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define FSMC_BCR3_MWID ((uint32_t)0x00000030) /*!< MWID[1:0] bits (Memory data bus width) */
+#define FSMC_BCR3_MWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define FSMC_BCR3_MWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+
+#define FSMC_BCR3_FACCEN ((uint32_t)0x00000040) /*!< Flash access enable */
+#define FSMC_BCR3_BURSTEN ((uint32_t)0x00000100) /*!< Burst enable bit */
+#define FSMC_BCR3_WAITPOL ((uint32_t)0x00000200) /*!< Wait signal polarity bit. */
+#define FSMC_BCR3_WRAPMOD ((uint32_t)0x00000400) /*!< Wrapped burst mode support */
+#define FSMC_BCR3_WAITCFG ((uint32_t)0x00000800) /*!< Wait timing configuration */
+#define FSMC_BCR3_WREN ((uint32_t)0x00001000) /*!< Write enable bit */
+#define FSMC_BCR3_WAITEN ((uint32_t)0x00002000) /*!< Wait enable bit */
+#define FSMC_BCR3_EXTMOD ((uint32_t)0x00004000) /*!< Extended mode enable */
+#define FSMC_BCR3_ASYNCWAIT ((uint32_t)0x00008000) /*!< Asynchronous wait */
+#define FSMC_BCR3_CBURSTRW ((uint32_t)0x00080000) /*!< Write burst enable */
+
+/****************** Bit definition for FSMC_BCR4 register *******************/
+#define FSMC_BCR4_MBKEN ((uint32_t)0x00000001) /*!< Memory bank enable bit */
+#define FSMC_BCR4_MUXEN ((uint32_t)0x00000002) /*!< Address/data multiplexing enable bit */
+
+#define FSMC_BCR4_MTYP ((uint32_t)0x0000000C) /*!< MTYP[1:0] bits (Memory type) */
+#define FSMC_BCR4_MTYP_0 ((uint32_t)0x00000004) /*!< Bit 0 */
+#define FSMC_BCR4_MTYP_1 ((uint32_t)0x00000008) /*!< Bit 1 */
+
+#define FSMC_BCR4_MWID ((uint32_t)0x00000030) /*!< MWID[1:0] bits (Memory data bus width) */
+#define FSMC_BCR4_MWID_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define FSMC_BCR4_MWID_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+
+#define FSMC_BCR4_FACCEN ((uint32_t)0x00000040) /*!< Flash access enable */
+#define FSMC_BCR4_BURSTEN ((uint32_t)0x00000100) /*!< Burst enable bit */
+#define FSMC_BCR4_WAITPOL ((uint32_t)0x00000200) /*!< Wait signal polarity bit */
+#define FSMC_BCR4_WRAPMOD ((uint32_t)0x00000400) /*!< Wrapped burst mode support */
+#define FSMC_BCR4_WAITCFG ((uint32_t)0x00000800) /*!< Wait timing configuration */
+#define FSMC_BCR4_WREN ((uint32_t)0x00001000) /*!< Write enable bit */
+#define FSMC_BCR4_WAITEN ((uint32_t)0x00002000) /*!< Wait enable bit */
+#define FSMC_BCR4_EXTMOD ((uint32_t)0x00004000) /*!< Extended mode enable */
+#define FSMC_BCR4_ASYNCWAIT ((uint32_t)0x00008000) /*!< Asynchronous wait */
+#define FSMC_BCR4_CBURSTRW ((uint32_t)0x00080000) /*!< Write burst enable */
+
+/****************** Bit definition for FSMC_BTR1 register ******************/
+#define FSMC_BTR1_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */
+#define FSMC_BTR1_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define FSMC_BTR1_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define FSMC_BTR1_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define FSMC_BTR1_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define FSMC_BTR1_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FSMC_BTR1_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define FSMC_BTR1_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define FSMC_BTR1_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define FSMC_BTR1_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define FSMC_BTR1_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */
+#define FSMC_BTR1_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define FSMC_BTR1_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define FSMC_BTR1_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define FSMC_BTR1_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+
+#define FSMC_BTR1_BUSTURN ((uint32_t)0x000F0000) /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define FSMC_BTR1_BUSTURN_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define FSMC_BTR1_BUSTURN_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define FSMC_BTR1_BUSTURN_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define FSMC_BTR1_BUSTURN_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+
+#define FSMC_BTR1_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */
+#define FSMC_BTR1_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define FSMC_BTR1_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define FSMC_BTR1_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */
+#define FSMC_BTR1_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */
+
+#define FSMC_BTR1_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */
+#define FSMC_BTR1_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define FSMC_BTR1_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define FSMC_BTR1_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define FSMC_BTR1_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define FSMC_BTR1_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */
+#define FSMC_BTR1_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */
+#define FSMC_BTR1_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */
+
+/****************** Bit definition for FSMC_BTR2 register *******************/
+#define FSMC_BTR2_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */
+#define FSMC_BTR2_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define FSMC_BTR2_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define FSMC_BTR2_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define FSMC_BTR2_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define FSMC_BTR2_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FSMC_BTR2_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define FSMC_BTR2_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define FSMC_BTR2_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define FSMC_BTR2_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define FSMC_BTR2_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */
+#define FSMC_BTR2_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define FSMC_BTR2_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define FSMC_BTR2_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define FSMC_BTR2_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+
+#define FSMC_BTR2_BUSTURN ((uint32_t)0x000F0000) /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define FSMC_BTR2_BUSTURN_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define FSMC_BTR2_BUSTURN_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define FSMC_BTR2_BUSTURN_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define FSMC_BTR2_BUSTURN_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+
+#define FSMC_BTR2_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */
+#define FSMC_BTR2_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define FSMC_BTR2_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define FSMC_BTR2_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */
+#define FSMC_BTR2_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */
+
+#define FSMC_BTR2_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */
+#define FSMC_BTR2_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define FSMC_BTR2_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define FSMC_BTR2_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define FSMC_BTR2_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define FSMC_BTR2_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */
+#define FSMC_BTR2_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */
+#define FSMC_BTR2_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */
+
+/******************* Bit definition for FSMC_BTR3 register *******************/
+#define FSMC_BTR3_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */
+#define FSMC_BTR3_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define FSMC_BTR3_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define FSMC_BTR3_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define FSMC_BTR3_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define FSMC_BTR3_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FSMC_BTR3_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define FSMC_BTR3_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define FSMC_BTR3_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define FSMC_BTR3_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define FSMC_BTR3_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */
+#define FSMC_BTR3_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define FSMC_BTR3_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define FSMC_BTR3_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define FSMC_BTR3_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+
+#define FSMC_BTR3_BUSTURN ((uint32_t)0x000F0000) /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define FSMC_BTR3_BUSTURN_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define FSMC_BTR3_BUSTURN_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define FSMC_BTR3_BUSTURN_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define FSMC_BTR3_BUSTURN_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+
+#define FSMC_BTR3_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */
+#define FSMC_BTR3_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define FSMC_BTR3_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define FSMC_BTR3_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */
+#define FSMC_BTR3_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */
+
+#define FSMC_BTR3_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */
+#define FSMC_BTR3_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define FSMC_BTR3_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define FSMC_BTR3_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define FSMC_BTR3_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define FSMC_BTR3_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */
+#define FSMC_BTR3_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */
+#define FSMC_BTR3_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */
+
+/****************** Bit definition for FSMC_BTR4 register *******************/
+#define FSMC_BTR4_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */
+#define FSMC_BTR4_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define FSMC_BTR4_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define FSMC_BTR4_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define FSMC_BTR4_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define FSMC_BTR4_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FSMC_BTR4_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define FSMC_BTR4_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define FSMC_BTR4_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define FSMC_BTR4_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define FSMC_BTR4_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */
+#define FSMC_BTR4_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define FSMC_BTR4_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define FSMC_BTR4_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define FSMC_BTR4_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+
+#define FSMC_BTR4_BUSTURN ((uint32_t)0x000F0000) /*!< BUSTURN[3:0] bits (Bus turnaround phase duration) */
+#define FSMC_BTR4_BUSTURN_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define FSMC_BTR4_BUSTURN_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define FSMC_BTR4_BUSTURN_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define FSMC_BTR4_BUSTURN_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+
+#define FSMC_BTR4_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */
+#define FSMC_BTR4_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define FSMC_BTR4_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define FSMC_BTR4_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */
+#define FSMC_BTR4_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */
+
+#define FSMC_BTR4_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */
+#define FSMC_BTR4_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define FSMC_BTR4_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define FSMC_BTR4_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define FSMC_BTR4_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define FSMC_BTR4_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */
+#define FSMC_BTR4_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */
+#define FSMC_BTR4_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */
+
+/****************** Bit definition for FSMC_BWTR1 register ******************/
+#define FSMC_BWTR1_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */
+#define FSMC_BWTR1_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define FSMC_BWTR1_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define FSMC_BWTR1_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define FSMC_BWTR1_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define FSMC_BWTR1_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FSMC_BWTR1_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define FSMC_BWTR1_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define FSMC_BWTR1_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define FSMC_BWTR1_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define FSMC_BWTR1_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */
+#define FSMC_BWTR1_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define FSMC_BWTR1_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define FSMC_BWTR1_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define FSMC_BWTR1_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+
+#define FSMC_BWTR1_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */
+#define FSMC_BWTR1_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define FSMC_BWTR1_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define FSMC_BWTR1_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */
+#define FSMC_BWTR1_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */
+
+#define FSMC_BWTR1_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */
+#define FSMC_BWTR1_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define FSMC_BWTR1_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define FSMC_BWTR1_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define FSMC_BWTR1_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define FSMC_BWTR1_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */
+#define FSMC_BWTR1_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */
+#define FSMC_BWTR1_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */
+
+/****************** Bit definition for FSMC_BWTR2 register ******************/
+#define FSMC_BWTR2_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */
+#define FSMC_BWTR2_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define FSMC_BWTR2_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define FSMC_BWTR2_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define FSMC_BWTR2_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define FSMC_BWTR2_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FSMC_BWTR2_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define FSMC_BWTR2_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define FSMC_BWTR2_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define FSMC_BWTR2_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define FSMC_BWTR2_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */
+#define FSMC_BWTR2_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define FSMC_BWTR2_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define FSMC_BWTR2_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define FSMC_BWTR2_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+
+#define FSMC_BWTR2_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */
+#define FSMC_BWTR2_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define FSMC_BWTR2_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1*/
+#define FSMC_BWTR2_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */
+#define FSMC_BWTR2_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */
+
+#define FSMC_BWTR2_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */
+#define FSMC_BWTR2_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define FSMC_BWTR2_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define FSMC_BWTR2_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define FSMC_BWTR2_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define FSMC_BWTR2_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */
+#define FSMC_BWTR2_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */
+#define FSMC_BWTR2_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */
+
+/****************** Bit definition for FSMC_BWTR3 register ******************/
+#define FSMC_BWTR3_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */
+#define FSMC_BWTR3_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define FSMC_BWTR3_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define FSMC_BWTR3_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define FSMC_BWTR3_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define FSMC_BWTR3_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FSMC_BWTR3_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define FSMC_BWTR3_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define FSMC_BWTR3_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define FSMC_BWTR3_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define FSMC_BWTR3_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */
+#define FSMC_BWTR3_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define FSMC_BWTR3_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define FSMC_BWTR3_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define FSMC_BWTR3_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+
+#define FSMC_BWTR3_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */
+#define FSMC_BWTR3_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define FSMC_BWTR3_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define FSMC_BWTR3_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */
+#define FSMC_BWTR3_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */
+
+#define FSMC_BWTR3_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */
+#define FSMC_BWTR3_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define FSMC_BWTR3_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define FSMC_BWTR3_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define FSMC_BWTR3_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define FSMC_BWTR3_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */
+#define FSMC_BWTR3_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */
+#define FSMC_BWTR3_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */
+
+/****************** Bit definition for FSMC_BWTR4 register ******************/
+#define FSMC_BWTR4_ADDSET ((uint32_t)0x0000000F) /*!< ADDSET[3:0] bits (Address setup phase duration) */
+#define FSMC_BWTR4_ADDSET_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define FSMC_BWTR4_ADDSET_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define FSMC_BWTR4_ADDSET_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define FSMC_BWTR4_ADDSET_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+
+#define FSMC_BWTR4_ADDHLD ((uint32_t)0x000000F0) /*!< ADDHLD[3:0] bits (Address-hold phase duration) */
+#define FSMC_BWTR4_ADDHLD_0 ((uint32_t)0x00000010) /*!< Bit 0 */
+#define FSMC_BWTR4_ADDHLD_1 ((uint32_t)0x00000020) /*!< Bit 1 */
+#define FSMC_BWTR4_ADDHLD_2 ((uint32_t)0x00000040) /*!< Bit 2 */
+#define FSMC_BWTR4_ADDHLD_3 ((uint32_t)0x00000080) /*!< Bit 3 */
+
+#define FSMC_BWTR4_DATAST ((uint32_t)0x0000FF00) /*!< DATAST [3:0] bits (Data-phase duration) */
+#define FSMC_BWTR4_DATAST_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define FSMC_BWTR4_DATAST_1 ((uint32_t)0x00000200) /*!< Bit 1 */
+#define FSMC_BWTR4_DATAST_2 ((uint32_t)0x00000400) /*!< Bit 2 */
+#define FSMC_BWTR4_DATAST_3 ((uint32_t)0x00000800) /*!< Bit 3 */
+
+#define FSMC_BWTR4_CLKDIV ((uint32_t)0x00F00000) /*!< CLKDIV[3:0] bits (Clock divide ratio) */
+#define FSMC_BWTR4_CLKDIV_0 ((uint32_t)0x00100000) /*!< Bit 0 */
+#define FSMC_BWTR4_CLKDIV_1 ((uint32_t)0x00200000) /*!< Bit 1 */
+#define FSMC_BWTR4_CLKDIV_2 ((uint32_t)0x00400000) /*!< Bit 2 */
+#define FSMC_BWTR4_CLKDIV_3 ((uint32_t)0x00800000) /*!< Bit 3 */
+
+#define FSMC_BWTR4_DATLAT ((uint32_t)0x0F000000) /*!< DATLA[3:0] bits (Data latency) */
+#define FSMC_BWTR4_DATLAT_0 ((uint32_t)0x01000000) /*!< Bit 0 */
+#define FSMC_BWTR4_DATLAT_1 ((uint32_t)0x02000000) /*!< Bit 1 */
+#define FSMC_BWTR4_DATLAT_2 ((uint32_t)0x04000000) /*!< Bit 2 */
+#define FSMC_BWTR4_DATLAT_3 ((uint32_t)0x08000000) /*!< Bit 3 */
+
+#define FSMC_BWTR4_ACCMOD ((uint32_t)0x30000000) /*!< ACCMOD[1:0] bits (Access mode) */
+#define FSMC_BWTR4_ACCMOD_0 ((uint32_t)0x10000000) /*!< Bit 0 */
+#define FSMC_BWTR4_ACCMOD_1 ((uint32_t)0x20000000) /*!< Bit 1 */
+
/******************************************************************************/
/* */
/* General Purpose IOs (GPIO) */
/* */
/******************************************************************************/
-/******************* Bit definition for GPIO_MODER register *****************/
+/******************* Bit definition for GPIO_MODER register *****************/
#define GPIO_MODER_MODER0 ((uint32_t)0x00000003)
#define GPIO_MODER_MODER0_0 ((uint32_t)0x00000001)
#define GPIO_MODER_MODER0_1 ((uint32_t)0x00000002)
@@ -2112,7 +2900,7 @@ typedef struct #define GPIO_MODER_MODER15_0 ((uint32_t)0x40000000)
#define GPIO_MODER_MODER15_1 ((uint32_t)0x80000000)
-/******************* Bit definition for GPIO_OTYPER register ****************/
+/******************* Bit definition for GPIO_OTYPER register ****************/
#define GPIO_OTYPER_OT_0 ((uint32_t)0x00000001)
#define GPIO_OTYPER_OT_1 ((uint32_t)0x00000002)
#define GPIO_OTYPER_OT_2 ((uint32_t)0x00000004)
@@ -2130,7 +2918,7 @@ typedef struct #define GPIO_OTYPER_OT_14 ((uint32_t)0x00004000)
#define GPIO_OTYPER_OT_15 ((uint32_t)0x00008000)
-/******************* Bit definition for GPIO_OSPEEDR register ***************/
+/******************* Bit definition for GPIO_OSPEEDR register ***************/
#define GPIO_OSPEEDER_OSPEEDR0 ((uint32_t)0x00000003)
#define GPIO_OSPEEDER_OSPEEDR0_0 ((uint32_t)0x00000001)
#define GPIO_OSPEEDER_OSPEEDR0_1 ((uint32_t)0x00000002)
@@ -2180,7 +2968,7 @@ typedef struct #define GPIO_OSPEEDER_OSPEEDR15_0 ((uint32_t)0x40000000)
#define GPIO_OSPEEDER_OSPEEDR15_1 ((uint32_t)0x80000000)
-/******************* Bit definition for GPIO_PUPDR register *****************/
+/******************* Bit definition for GPIO_PUPDR register *****************/
#define GPIO_PUPDR_PUPDR0 ((uint32_t)0x00000003)
#define GPIO_PUPDR_PUPDR0_0 ((uint32_t)0x00000001)
#define GPIO_PUPDR_PUPDR0_1 ((uint32_t)0x00000002)
@@ -2230,43 +3018,77 @@ typedef struct #define GPIO_PUPDR_PUPDR15_0 ((uint32_t)0x40000000)
#define GPIO_PUPDR_PUPDR15_1 ((uint32_t)0x80000000)
-/******************* Bit definition for GPIO_IDR register *******************/
-#define GPIO_OTYPER_IDR_0 ((uint32_t)0x00000001)
-#define GPIO_OTYPER_IDR_1 ((uint32_t)0x00000002)
-#define GPIO_OTYPER_IDR_2 ((uint32_t)0x00000004)
-#define GPIO_OTYPER_IDR_3 ((uint32_t)0x00000008)
-#define GPIO_OTYPER_IDR_4 ((uint32_t)0x00000010)
-#define GPIO_OTYPER_IDR_5 ((uint32_t)0x00000020)
-#define GPIO_OTYPER_IDR_6 ((uint32_t)0x00000040)
-#define GPIO_OTYPER_IDR_7 ((uint32_t)0x00000080)
-#define GPIO_OTYPER_IDR_8 ((uint32_t)0x00000100)
-#define GPIO_OTYPER_IDR_9 ((uint32_t)0x00000200)
-#define GPIO_OTYPER_IDR_10 ((uint32_t)0x00000400)
-#define GPIO_OTYPER_IDR_11 ((uint32_t)0x00000800)
-#define GPIO_OTYPER_IDR_12 ((uint32_t)0x00001000)
-#define GPIO_OTYPER_IDR_13 ((uint32_t)0x00002000)
-#define GPIO_OTYPER_IDR_14 ((uint32_t)0x00004000)
-#define GPIO_OTYPER_IDR_15 ((uint32_t)0x00008000)
-
-/******************* Bit definition for GPIO_ODR register *******************/
-#define GPIO_OTYPER_ODR_0 ((uint32_t)0x00000001)
-#define GPIO_OTYPER_ODR_1 ((uint32_t)0x00000002)
-#define GPIO_OTYPER_ODR_2 ((uint32_t)0x00000004)
-#define GPIO_OTYPER_ODR_3 ((uint32_t)0x00000008)
-#define GPIO_OTYPER_ODR_4 ((uint32_t)0x00000010)
-#define GPIO_OTYPER_ODR_5 ((uint32_t)0x00000020)
-#define GPIO_OTYPER_ODR_6 ((uint32_t)0x00000040)
-#define GPIO_OTYPER_ODR_7 ((uint32_t)0x00000080)
-#define GPIO_OTYPER_ODR_8 ((uint32_t)0x00000100)
-#define GPIO_OTYPER_ODR_9 ((uint32_t)0x00000200)
-#define GPIO_OTYPER_ODR_10 ((uint32_t)0x00000400)
-#define GPIO_OTYPER_ODR_11 ((uint32_t)0x00000800)
-#define GPIO_OTYPER_ODR_12 ((uint32_t)0x00001000)
-#define GPIO_OTYPER_ODR_13 ((uint32_t)0x00002000)
-#define GPIO_OTYPER_ODR_14 ((uint32_t)0x00004000)
-#define GPIO_OTYPER_ODR_15 ((uint32_t)0x00008000)
-
-/******************* Bit definition for GPIO_BSRR register ******************/
+/****************** Bits definition for GPIO_IDR register *******************/
+#define GPIO_IDR_IDR_0 ((uint32_t)0x00000001)
+#define GPIO_IDR_IDR_1 ((uint32_t)0x00000002)
+#define GPIO_IDR_IDR_2 ((uint32_t)0x00000004)
+#define GPIO_IDR_IDR_3 ((uint32_t)0x00000008)
+#define GPIO_IDR_IDR_4 ((uint32_t)0x00000010)
+#define GPIO_IDR_IDR_5 ((uint32_t)0x00000020)
+#define GPIO_IDR_IDR_6 ((uint32_t)0x00000040)
+#define GPIO_IDR_IDR_7 ((uint32_t)0x00000080)
+#define GPIO_IDR_IDR_8 ((uint32_t)0x00000100)
+#define GPIO_IDR_IDR_9 ((uint32_t)0x00000200)
+#define GPIO_IDR_IDR_10 ((uint32_t)0x00000400)
+#define GPIO_IDR_IDR_11 ((uint32_t)0x00000800)
+#define GPIO_IDR_IDR_12 ((uint32_t)0x00001000)
+#define GPIO_IDR_IDR_13 ((uint32_t)0x00002000)
+#define GPIO_IDR_IDR_14 ((uint32_t)0x00004000)
+#define GPIO_IDR_IDR_15 ((uint32_t)0x00008000)
+/* Old GPIO_IDR register bits definition, maintained for legacy purpose */
+#define GPIO_OTYPER_IDR_0 GPIO_IDR_IDR_0
+#define GPIO_OTYPER_IDR_1 GPIO_IDR_IDR_1
+#define GPIO_OTYPER_IDR_2 GPIO_IDR_IDR_2
+#define GPIO_OTYPER_IDR_3 GPIO_IDR_IDR_3
+#define GPIO_OTYPER_IDR_4 GPIO_IDR_IDR_4
+#define GPIO_OTYPER_IDR_5 GPIO_IDR_IDR_5
+#define GPIO_OTYPER_IDR_6 GPIO_IDR_IDR_6
+#define GPIO_OTYPER_IDR_7 GPIO_IDR_IDR_7
+#define GPIO_OTYPER_IDR_8 GPIO_IDR_IDR_8
+#define GPIO_OTYPER_IDR_9 GPIO_IDR_IDR_9
+#define GPIO_OTYPER_IDR_10 GPIO_IDR_IDR_10
+#define GPIO_OTYPER_IDR_11 GPIO_IDR_IDR_11
+#define GPIO_OTYPER_IDR_12 GPIO_IDR_IDR_12
+#define GPIO_OTYPER_IDR_13 GPIO_IDR_IDR_13
+#define GPIO_OTYPER_IDR_14 GPIO_IDR_IDR_14
+#define GPIO_OTYPER_IDR_15 GPIO_IDR_IDR_15
+
+/****************** Bits definition for GPIO_ODR register *******************/
+#define GPIO_ODR_ODR_0 ((uint32_t)0x00000001)
+#define GPIO_ODR_ODR_1 ((uint32_t)0x00000002)
+#define GPIO_ODR_ODR_2 ((uint32_t)0x00000004)
+#define GPIO_ODR_ODR_3 ((uint32_t)0x00000008)
+#define GPIO_ODR_ODR_4 ((uint32_t)0x00000010)
+#define GPIO_ODR_ODR_5 ((uint32_t)0x00000020)
+#define GPIO_ODR_ODR_6 ((uint32_t)0x00000040)
+#define GPIO_ODR_ODR_7 ((uint32_t)0x00000080)
+#define GPIO_ODR_ODR_8 ((uint32_t)0x00000100)
+#define GPIO_ODR_ODR_9 ((uint32_t)0x00000200)
+#define GPIO_ODR_ODR_10 ((uint32_t)0x00000400)
+#define GPIO_ODR_ODR_11 ((uint32_t)0x00000800)
+#define GPIO_ODR_ODR_12 ((uint32_t)0x00001000)
+#define GPIO_ODR_ODR_13 ((uint32_t)0x00002000)
+#define GPIO_ODR_ODR_14 ((uint32_t)0x00004000)
+#define GPIO_ODR_ODR_15 ((uint32_t)0x00008000)
+/* Old GPIO_ODR register bits definition, maintained for legacy purpose */
+#define GPIO_OTYPER_ODR_0 GPIO_ODR_ODR_0
+#define GPIO_OTYPER_ODR_1 GPIO_ODR_ODR_1
+#define GPIO_OTYPER_ODR_2 GPIO_ODR_ODR_2
+#define GPIO_OTYPER_ODR_3 GPIO_ODR_ODR_3
+#define GPIO_OTYPER_ODR_4 GPIO_ODR_ODR_4
+#define GPIO_OTYPER_ODR_5 GPIO_ODR_ODR_5
+#define GPIO_OTYPER_ODR_6 GPIO_ODR_ODR_6
+#define GPIO_OTYPER_ODR_7 GPIO_ODR_ODR_7
+#define GPIO_OTYPER_ODR_8 GPIO_ODR_ODR_8
+#define GPIO_OTYPER_ODR_9 GPIO_ODR_ODR_9
+#define GPIO_OTYPER_ODR_10 GPIO_ODR_ODR_10
+#define GPIO_OTYPER_ODR_11 GPIO_ODR_ODR_11
+#define GPIO_OTYPER_ODR_12 GPIO_ODR_ODR_12
+#define GPIO_OTYPER_ODR_13 GPIO_ODR_ODR_13
+#define GPIO_OTYPER_ODR_14 GPIO_ODR_ODR_14
+#define GPIO_OTYPER_ODR_15 GPIO_ODR_ODR_15
+
+/******************* Bit definition for GPIO_BSRR register ******************/
#define GPIO_BSRR_BS_0 ((uint32_t)0x00000001)
#define GPIO_BSRR_BS_1 ((uint32_t)0x00000002)
#define GPIO_BSRR_BS_2 ((uint32_t)0x00000004)
@@ -2602,10 +3424,10 @@ typedef struct #define RCC_ICSCR_HSITRIM ((uint32_t)0x00001F00) /*!< Internal High Speed clock trimming */
#define RCC_ICSCR_MSIRANGE ((uint32_t)0x0000E000) /*!< Internal Multi Speed clock Range */
-#define RCC_ICSCR_MSIRANGE_0 ((uint32_t)0x00000000) /*!< Internal Multi Speed clock Range 65.536 kHz */
-#define RCC_ICSCR_MSIRANGE_1 ((uint32_t)0x00002000) /*!< Internal Multi Speed clock Range 131.072 kHz */
-#define RCC_ICSCR_MSIRANGE_2 ((uint32_t)0x00004000) /*!< Internal Multi Speed clock Range 262.144 kHz */
-#define RCC_ICSCR_MSIRANGE_3 ((uint32_t)0x00006000) /*!< Internal Multi Speed clock Range 524.288 kHz */
+#define RCC_ICSCR_MSIRANGE_0 ((uint32_t)0x00000000) /*!< Internal Multi Speed clock Range 65.536 KHz */
+#define RCC_ICSCR_MSIRANGE_1 ((uint32_t)0x00002000) /*!< Internal Multi Speed clock Range 131.072 KHz */
+#define RCC_ICSCR_MSIRANGE_2 ((uint32_t)0x00004000) /*!< Internal Multi Speed clock Range 262.144 KHz */
+#define RCC_ICSCR_MSIRANGE_3 ((uint32_t)0x00006000) /*!< Internal Multi Speed clock Range 524.288 KHz */
#define RCC_ICSCR_MSIRANGE_4 ((uint32_t)0x00008000) /*!< Internal Multi Speed clock Range 1.048 MHz */
#define RCC_ICSCR_MSIRANGE_5 ((uint32_t)0x0000A000) /*!< Internal Multi Speed clock Range 2.097 MHz */
#define RCC_ICSCR_MSIRANGE_6 ((uint32_t)0x0000C000) /*!< Internal Multi Speed clock Range 4.194 MHz */
@@ -2745,6 +3567,7 @@ typedef struct #define RCC_CIR_HSERDYF ((uint32_t)0x00000008) /*!< HSE Ready Interrupt flag */
#define RCC_CIR_PLLRDYF ((uint32_t)0x00000010) /*!< PLL Ready Interrupt flag */
#define RCC_CIR_MSIRDYF ((uint32_t)0x00000020) /*!< MSI Ready Interrupt flag */
+#define RCC_CIR_LSECSS ((uint32_t)0x00000040) /*!< LSE CSS Interrupt flag */
#define RCC_CIR_CSSF ((uint32_t)0x00000080) /*!< Clock Security System Interrupt flag */
#define RCC_CIR_LSIRDYIE ((uint32_t)0x00000100) /*!< LSI Ready Interrupt Enable */
@@ -2753,6 +3576,7 @@ typedef struct #define RCC_CIR_HSERDYIE ((uint32_t)0x00000800) /*!< HSE Ready Interrupt Enable */
#define RCC_CIR_PLLRDYIE ((uint32_t)0x00001000) /*!< PLL Ready Interrupt Enable */
#define RCC_CIR_MSIRDYIE ((uint32_t)0x00002000) /*!< MSI Ready Interrupt Enable */
+#define RCC_CIR_LSECSSIE ((uint32_t)0x00004000) /*!< LSE CSS Interrupt Enable */
#define RCC_CIR_LSIRDYC ((uint32_t)0x00010000) /*!< LSI Ready Interrupt Clear */
#define RCC_CIR_LSERDYC ((uint32_t)0x00020000) /*!< LSE Ready Interrupt Clear */
@@ -2760,6 +3584,7 @@ typedef struct #define RCC_CIR_HSERDYC ((uint32_t)0x00080000) /*!< HSE Ready Interrupt Clear */
#define RCC_CIR_PLLRDYC ((uint32_t)0x00100000) /*!< PLL Ready Interrupt Clear */
#define RCC_CIR_MSIRDYC ((uint32_t)0x00200000) /*!< MSI Ready Interrupt Clear */
+#define RCC_CIR_LSECSSC ((uint32_t)0x00400000) /*!< LSE CSS Interrupt Clear */
#define RCC_CIR_CSSC ((uint32_t)0x00800000) /*!< Clock Security System Interrupt Clear */
@@ -2770,16 +3595,22 @@ typedef struct #define RCC_AHBRSTR_GPIODRST ((uint32_t)0x00000008) /*!< GPIO port D reset */
#define RCC_AHBRSTR_GPIOERST ((uint32_t)0x00000010) /*!< GPIO port E reset */
#define RCC_AHBRSTR_GPIOHRST ((uint32_t)0x00000020) /*!< GPIO port H reset */
+#define RCC_AHBRSTR_GPIOFRST ((uint32_t)0x00000040) /*!< GPIO port F reset */
+#define RCC_AHBRSTR_GPIOGRST ((uint32_t)0x00000080) /*!< GPIO port G reset */
#define RCC_AHBRSTR_CRCRST ((uint32_t)0x00001000) /*!< CRC reset */
#define RCC_AHBRSTR_FLITFRST ((uint32_t)0x00008000) /*!< FLITF reset */
#define RCC_AHBRSTR_DMA1RST ((uint32_t)0x01000000) /*!< DMA1 reset */
-
+#define RCC_AHBRSTR_DMA2RST ((uint32_t)0x02000000) /*!< DMA2 reset */
+#define RCC_AHBRSTR_AESRST ((uint32_t)0x08000000) /*!< AES reset */
+#define RCC_AHBRSTR_FSMCRST ((uint32_t)0x40000000) /*!< FSMC reset */
+
/***************** Bit definition for RCC_APB2RSTR register *****************/
#define RCC_APB2RSTR_SYSCFGRST ((uint32_t)0x00000001) /*!< System Configuration SYSCFG reset */
#define RCC_APB2RSTR_TIM9RST ((uint32_t)0x00000004) /*!< TIM9 reset */
#define RCC_APB2RSTR_TIM10RST ((uint32_t)0x00000008) /*!< TIM10 reset */
#define RCC_APB2RSTR_TIM11RST ((uint32_t)0x00000010) /*!< TIM11 reset */
#define RCC_APB2RSTR_ADC1RST ((uint32_t)0x00000200) /*!< ADC1 reset */
+#define RCC_APB2RSTR_SDIORST ((uint32_t)0x00000800) /*!< SDIO reset */
#define RCC_APB2RSTR_SPI1RST ((uint32_t)0x00001000) /*!< SPI1 reset */
#define RCC_APB2RSTR_USART1RST ((uint32_t)0x00004000) /*!< USART1 reset */
@@ -2787,13 +3618,17 @@ typedef struct #define RCC_APB1RSTR_TIM2RST ((uint32_t)0x00000001) /*!< Timer 2 reset */
#define RCC_APB1RSTR_TIM3RST ((uint32_t)0x00000002) /*!< Timer 3 reset */
#define RCC_APB1RSTR_TIM4RST ((uint32_t)0x00000004) /*!< Timer 4 reset */
+#define RCC_APB1RSTR_TIM5RST ((uint32_t)0x00000008) /*!< Timer 5 reset */
#define RCC_APB1RSTR_TIM6RST ((uint32_t)0x00000010) /*!< Timer 6 reset */
#define RCC_APB1RSTR_TIM7RST ((uint32_t)0x00000020) /*!< Timer 7 reset */
#define RCC_APB1RSTR_LCDRST ((uint32_t)0x00000200) /*!< LCD reset */
#define RCC_APB1RSTR_WWDGRST ((uint32_t)0x00000800) /*!< Window Watchdog reset */
#define RCC_APB1RSTR_SPI2RST ((uint32_t)0x00004000) /*!< SPI 2 reset */
+#define RCC_APB1RSTR_SPI3RST ((uint32_t)0x00008000) /*!< SPI 3 reset */
#define RCC_APB1RSTR_USART2RST ((uint32_t)0x00020000) /*!< USART 2 reset */
-#define RCC_APB1RSTR_USART3RST ((uint32_t)0x00040000) /*!< RUSART 3 reset */
+#define RCC_APB1RSTR_USART3RST ((uint32_t)0x00040000) /*!< USART 3 reset */
+#define RCC_APB1RSTR_UART4RST ((uint32_t)0x00080000) /*!< UART 4 reset */
+#define RCC_APB1RSTR_UART5RST ((uint32_t)0x00100000) /*!< UART 5 reset */
#define RCC_APB1RSTR_I2C1RST ((uint32_t)0x00200000) /*!< I2C 1 reset */
#define RCC_APB1RSTR_I2C2RST ((uint32_t)0x00400000) /*!< I2C 2 reset */
#define RCC_APB1RSTR_USBRST ((uint32_t)0x00800000) /*!< USB reset */
@@ -2808,10 +3643,15 @@ typedef struct #define RCC_AHBENR_GPIODEN ((uint32_t)0x00000008) /*!< GPIO port D clock enable */
#define RCC_AHBENR_GPIOEEN ((uint32_t)0x00000010) /*!< GPIO port E clock enable */
#define RCC_AHBENR_GPIOHEN ((uint32_t)0x00000020) /*!< GPIO port H clock enable */
+#define RCC_AHBENR_GPIOFEN ((uint32_t)0x00000040) /*!< GPIO port F clock enable */
+#define RCC_AHBENR_GPIOGEN ((uint32_t)0x00000080) /*!< GPIO port G clock enable */
#define RCC_AHBENR_CRCEN ((uint32_t)0x00001000) /*!< CRC clock enable */
#define RCC_AHBENR_FLITFEN ((uint32_t)0x00008000) /*!< FLITF clock enable (has effect only when
the Flash memory is in power down mode) */
#define RCC_AHBENR_DMA1EN ((uint32_t)0x01000000) /*!< DMA1 clock enable */
+#define RCC_AHBENR_DMA2EN ((uint32_t)0x02000000) /*!< DMA2 clock enable */
+#define RCC_AHBENR_AESEN ((uint32_t)0x08000000) /*!< AES clock enable */
+#define RCC_AHBENR_FSMCEN ((uint32_t)0x40000000) /*!< FSMC clock enable */
/****************** Bit definition for RCC_APB2ENR register *****************/
@@ -2820,6 +3660,7 @@ typedef struct #define RCC_APB2ENR_TIM10EN ((uint32_t)0x00000008) /*!< TIM10 interface clock enable */
#define RCC_APB2ENR_TIM11EN ((uint32_t)0x00000010) /*!< TIM11 Timer clock enable */
#define RCC_APB2ENR_ADC1EN ((uint32_t)0x00000200) /*!< ADC1 clock enable */
+#define RCC_APB2ENR_SDIOEN ((uint32_t)0x00000800) /*!< SDIO clock enable */
#define RCC_APB2ENR_SPI1EN ((uint32_t)0x00001000) /*!< SPI1 clock enable */
#define RCC_APB2ENR_USART1EN ((uint32_t)0x00004000) /*!< USART1 clock enable */
@@ -2828,13 +3669,17 @@ typedef struct #define RCC_APB1ENR_TIM2EN ((uint32_t)0x00000001) /*!< Timer 2 clock enabled*/
#define RCC_APB1ENR_TIM3EN ((uint32_t)0x00000002) /*!< Timer 3 clock enable */
#define RCC_APB1ENR_TIM4EN ((uint32_t)0x00000004) /*!< Timer 4 clock enable */
+#define RCC_APB1ENR_TIM5EN ((uint32_t)0x00000008) /*!< Timer 5 clock enable */
#define RCC_APB1ENR_TIM6EN ((uint32_t)0x00000010) /*!< Timer 6 clock enable */
#define RCC_APB1ENR_TIM7EN ((uint32_t)0x00000020) /*!< Timer 7 clock enable */
#define RCC_APB1ENR_LCDEN ((uint32_t)0x00000200) /*!< LCD clock enable */
#define RCC_APB1ENR_WWDGEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enable */
#define RCC_APB1ENR_SPI2EN ((uint32_t)0x00004000) /*!< SPI 2 clock enable */
+#define RCC_APB1ENR_SPI3EN ((uint32_t)0x00008000) /*!< SPI 3 clock enable */
#define RCC_APB1ENR_USART2EN ((uint32_t)0x00020000) /*!< USART 2 clock enable */
#define RCC_APB1ENR_USART3EN ((uint32_t)0x00040000) /*!< USART 3 clock enable */
+#define RCC_APB1ENR_UART4EN ((uint32_t)0x00080000) /*!< UART 4 clock enable */
+#define RCC_APB1ENR_UART5EN ((uint32_t)0x00100000) /*!< UART 5 clock enable */
#define RCC_APB1ENR_I2C1EN ((uint32_t)0x00200000) /*!< I2C 1 clock enable */
#define RCC_APB1ENR_I2C2EN ((uint32_t)0x00400000) /*!< I2C 2 clock enable */
#define RCC_APB1ENR_USBEN ((uint32_t)0x00800000) /*!< USB clock enable */
@@ -2849,12 +3694,17 @@ typedef struct #define RCC_AHBLPENR_GPIODLPEN ((uint32_t)0x00000008) /*!< GPIO port D clock enabled in sleep mode */
#define RCC_AHBLPENR_GPIOELPEN ((uint32_t)0x00000010) /*!< GPIO port E clock enabled in sleep mode */
#define RCC_AHBLPENR_GPIOHLPEN ((uint32_t)0x00000020) /*!< GPIO port H clock enabled in sleep mode */
+#define RCC_AHBLPENR_GPIOFLPEN ((uint32_t)0x00000040) /*!< GPIO port F clock enabled in sleep mode */
+#define RCC_AHBLPENR_GPIOGLPEN ((uint32_t)0x00000080) /*!< GPIO port G clock enabled in sleep mode */
#define RCC_AHBLPENR_CRCLPEN ((uint32_t)0x00001000) /*!< CRC clock enabled in sleep mode */
#define RCC_AHBLPENR_FLITFLPEN ((uint32_t)0x00008000) /*!< Flash Interface clock enabled in sleep mode
(has effect only when the Flash memory is
in power down mode) */
#define RCC_AHBLPENR_SRAMLPEN ((uint32_t)0x00010000) /*!< SRAM clock enabled in sleep mode */
#define RCC_AHBLPENR_DMA1LPEN ((uint32_t)0x01000000) /*!< DMA1 clock enabled in sleep mode */
+#define RCC_AHBLPENR_DMA2LPEN ((uint32_t)0x02000000) /*!< DMA2 clock enabled in sleep mode */
+#define RCC_AHBLPENR_AESLPEN ((uint32_t)0x08000000) /*!< AES clock enabled in sleep mode */
+#define RCC_AHBLPENR_FSMCLPEN ((uint32_t)0x40000000) /*!< FSMC clock enabled in sleep mode */
/****************** Bit definition for RCC_APB2LPENR register ***************/
#define RCC_APB2LPENR_SYSCFGLPEN ((uint32_t)0x00000001) /*!< System Configuration SYSCFG clock enabled in sleep mode */
@@ -2862,6 +3712,7 @@ typedef struct #define RCC_APB2LPENR_TIM10LPEN ((uint32_t)0x00000008) /*!< TIM10 interface clock enabled in sleep mode */
#define RCC_APB2LPENR_TIM11LPEN ((uint32_t)0x00000010) /*!< TIM11 Timer clock enabled in sleep mode */
#define RCC_APB2LPENR_ADC1LPEN ((uint32_t)0x00000200) /*!< ADC1 clock enabled in sleep mode */
+#define RCC_APB2LPENR_SDIOLPEN ((uint32_t)0x00000800) /*!< SDIO clock enabled in sleep mode */
#define RCC_APB2LPENR_SPI1LPEN ((uint32_t)0x00001000) /*!< SPI1 clock enabled in sleep mode */
#define RCC_APB2LPENR_USART1LPEN ((uint32_t)0x00004000) /*!< USART1 clock enabled in sleep mode */
@@ -2869,13 +3720,17 @@ typedef struct #define RCC_APB1LPENR_TIM2LPEN ((uint32_t)0x00000001) /*!< Timer 2 clock enabled in sleep mode */
#define RCC_APB1LPENR_TIM3LPEN ((uint32_t)0x00000002) /*!< Timer 3 clock enabled in sleep mode */
#define RCC_APB1LPENR_TIM4LPEN ((uint32_t)0x00000004) /*!< Timer 4 clock enabled in sleep mode */
+#define RCC_APB1LPENR_TIM5LPEN ((uint32_t)0x00000008) /*!< Timer 5 clock enabled in sleep mode */
#define RCC_APB1LPENR_TIM6LPEN ((uint32_t)0x00000010) /*!< Timer 6 clock enabled in sleep mode */
#define RCC_APB1LPENR_TIM7LPEN ((uint32_t)0x00000020) /*!< Timer 7 clock enabled in sleep mode */
#define RCC_APB1LPENR_LCDLPEN ((uint32_t)0x00000200) /*!< LCD clock enabled in sleep mode */
#define RCC_APB1LPENR_WWDGLPEN ((uint32_t)0x00000800) /*!< Window Watchdog clock enabled in sleep mode */
#define RCC_APB1LPENR_SPI2LPEN ((uint32_t)0x00004000) /*!< SPI 2 clock enabled in sleep mode */
+#define RCC_APB1LPENR_SPI3LPEN ((uint32_t)0x00008000) /*!< SPI 3 clock enabled in sleep mode */
#define RCC_APB1LPENR_USART2LPEN ((uint32_t)0x00020000) /*!< USART 2 clock enabled in sleep mode */
#define RCC_APB1LPENR_USART3LPEN ((uint32_t)0x00040000) /*!< USART 3 clock enabled in sleep mode */
+#define RCC_APB1LPENR_UART4LPEN ((uint32_t)0x00080000) /*!< UART 4 clock enabled in sleep mode */
+#define RCC_APB1LPENR_UART5LPEN ((uint32_t)0x00100000) /*!< UART 5 clock enabled in sleep mode */
#define RCC_APB1LPENR_I2C1LPEN ((uint32_t)0x00200000) /*!< I2C 1 clock enabled in sleep mode */
#define RCC_APB1LPENR_I2C2LPEN ((uint32_t)0x00400000) /*!< I2C 2 clock enabled in sleep mode */
#define RCC_APB1LPENR_USBLPEN ((uint32_t)0x00800000) /*!< USB clock enabled in sleep mode */
@@ -2890,6 +3745,8 @@ typedef struct #define RCC_CSR_LSEON ((uint32_t)0x00000100) /*!< External Low Speed oscillator enable */
#define RCC_CSR_LSERDY ((uint32_t)0x00000200) /*!< External Low Speed oscillator Ready */
#define RCC_CSR_LSEBYP ((uint32_t)0x00000400) /*!< External Low Speed oscillator Bypass */
+#define RCC_CSR_LSECSSON ((uint32_t)0x00000800) /*!< External Low Speed oscillator CSS Enable */
+#define RCC_CSR_LSECSSD ((uint32_t)0x00001000) /*!< External Low Speed oscillator CSS Detected */
#define RCC_CSR_RTCSEL ((uint32_t)0x00030000) /*!< RTCSEL[1:0] bits (RTC clock source selection) */
#define RCC_CSR_RTCSEL_0 ((uint32_t)0x00010000) /*!< Bit 0 */
@@ -2903,7 +3760,7 @@ typedef struct #define RCC_CSR_RTCEN ((uint32_t)0x00400000) /*!< RTC clock enable */
#define RCC_CSR_RTCRST ((uint32_t)0x00800000) /*!< RTC reset */
-
+
#define RCC_CSR_RMVF ((uint32_t)0x01000000) /*!< Remove reset flag */
#define RCC_CSR_OBLRSTF ((uint32_t)0x02000000) /*!< Option Bytes Loader reset flag */
#define RCC_CSR_PINRSTF ((uint32_t)0x04000000) /*!< PIN reset flag */
@@ -2984,6 +3841,7 @@ typedef struct #define RTC_CR_OSEL_0 ((uint32_t)0x00200000)
#define RTC_CR_OSEL_1 ((uint32_t)0x00400000)
#define RTC_CR_POL ((uint32_t)0x00100000)
+#define RTC_CR_COSEL ((uint32_t)0x00080000)
#define RTC_CR_BCK ((uint32_t)0x00040000)
#define RTC_CR_SUB1H ((uint32_t)0x00020000)
#define RTC_CR_ADD1H ((uint32_t)0x00010000)
@@ -2997,6 +3855,7 @@ typedef struct #define RTC_CR_ALRAE ((uint32_t)0x00000100)
#define RTC_CR_DCE ((uint32_t)0x00000080)
#define RTC_CR_FMT ((uint32_t)0x00000040)
+#define RTC_CR_BYPSHAD ((uint32_t)0x00000020)
#define RTC_CR_REFCKON ((uint32_t)0x00000010)
#define RTC_CR_TSEDGE ((uint32_t)0x00000008)
#define RTC_CR_WUCKSEL ((uint32_t)0x00000007)
@@ -3005,6 +3864,9 @@ typedef struct #define RTC_CR_WUCKSEL_2 ((uint32_t)0x00000004)
/******************** Bits definition for RTC_ISR register ******************/
+#define RTC_ISR_RECALPF ((uint32_t)0x00010000)
+#define RTC_ISR_TAMP3F ((uint32_t)0x00008000)
+#define RTC_ISR_TAMP2F ((uint32_t)0x00004000)
#define RTC_ISR_TAMP1F ((uint32_t)0x00002000)
#define RTC_ISR_TSOVF ((uint32_t)0x00001000)
#define RTC_ISR_TSF ((uint32_t)0x00000800)
@@ -3015,13 +3877,14 @@ typedef struct #define RTC_ISR_INITF ((uint32_t)0x00000040)
#define RTC_ISR_RSF ((uint32_t)0x00000020)
#define RTC_ISR_INITS ((uint32_t)0x00000010)
+#define RTC_ISR_SHPF ((uint32_t)0x00000008)
#define RTC_ISR_WUTWF ((uint32_t)0x00000004)
#define RTC_ISR_ALRBWF ((uint32_t)0x00000002)
#define RTC_ISR_ALRAWF ((uint32_t)0x00000001)
/******************** Bits definition for RTC_PRER register *****************/
#define RTC_PRER_PREDIV_A ((uint32_t)0x007F0000)
-#define RTC_PRER_PREDIV_S ((uint32_t)0x00001FFF)
+#define RTC_PRER_PREDIV_S ((uint32_t)0x00007FFF)
/******************** Bits definition for RTC_WUTR register *****************/
#define RTC_WUTR_WUT ((uint32_t)0x0000FFFF)
@@ -3117,6 +3980,13 @@ typedef struct /******************** Bits definition for RTC_WPR register ******************/
#define RTC_WPR_KEY ((uint32_t)0x000000FF)
+/******************** Bits definition for RTC_SSR register ******************/
+#define RTC_SSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_SHIFTR register ***************/
+#define RTC_SHIFTR_SUBFS ((uint32_t)0x00007FFF)
+#define RTC_SHIFTR_ADD1S ((uint32_t)0x80000000)
+
/******************** Bits definition for RTC_TSTR register *****************/
#define RTC_TSTR_PM ((uint32_t)0x00400000)
#define RTC_TSTR_HT ((uint32_t)0x00300000)
@@ -3166,12 +4036,62 @@ typedef struct #define RTC_TSDR_DU_2 ((uint32_t)0x00000004)
#define RTC_TSDR_DU_3 ((uint32_t)0x00000008)
+/******************** Bits definition for RTC_TSSSR register ****************/
+#define RTC_TSSSR_SS ((uint32_t)0x0000FFFF)
+
+/******************** Bits definition for RTC_CAL register *****************/
+#define RTC_CALR_CALP ((uint32_t)0x00008000)
+#define RTC_CALR_CALW8 ((uint32_t)0x00004000)
+#define RTC_CALR_CALW16 ((uint32_t)0x00002000)
+#define RTC_CALR_CALM ((uint32_t)0x000001FF)
+#define RTC_CALR_CALM_0 ((uint32_t)0x00000001)
+#define RTC_CALR_CALM_1 ((uint32_t)0x00000002)
+#define RTC_CALR_CALM_2 ((uint32_t)0x00000004)
+#define RTC_CALR_CALM_3 ((uint32_t)0x00000008)
+#define RTC_CALR_CALM_4 ((uint32_t)0x00000010)
+#define RTC_CALR_CALM_5 ((uint32_t)0x00000020)
+#define RTC_CALR_CALM_6 ((uint32_t)0x00000040)
+#define RTC_CALR_CALM_7 ((uint32_t)0x00000080)
+#define RTC_CALR_CALM_8 ((uint32_t)0x00000100)
+
/******************** Bits definition for RTC_TAFCR register ****************/
#define RTC_TAFCR_ALARMOUTTYPE ((uint32_t)0x00040000)
+#define RTC_TAFCR_TAMPPUDIS ((uint32_t)0x00008000)
+#define RTC_TAFCR_TAMPPRCH ((uint32_t)0x00006000)
+#define RTC_TAFCR_TAMPPRCH_0 ((uint32_t)0x00002000)
+#define RTC_TAFCR_TAMPPRCH_1 ((uint32_t)0x00004000)
+#define RTC_TAFCR_TAMPFLT ((uint32_t)0x00001800)
+#define RTC_TAFCR_TAMPFLT_0 ((uint32_t)0x00000800)
+#define RTC_TAFCR_TAMPFLT_1 ((uint32_t)0x00001000)
+#define RTC_TAFCR_TAMPFREQ ((uint32_t)0x00000700)
+#define RTC_TAFCR_TAMPFREQ_0 ((uint32_t)0x00000100)
+#define RTC_TAFCR_TAMPFREQ_1 ((uint32_t)0x00000200)
+#define RTC_TAFCR_TAMPFREQ_2 ((uint32_t)0x00000400)
+#define RTC_TAFCR_TAMPTS ((uint32_t)0x00000080)
+#define RTC_TAFCR_TAMP3TRG ((uint32_t)0x00000040)
+#define RTC_TAFCR_TAMP3E ((uint32_t)0x00000020)
+#define RTC_TAFCR_TAMP2TRG ((uint32_t)0x00000010)
+#define RTC_TAFCR_TAMP2E ((uint32_t)0x00000008)
#define RTC_TAFCR_TAMPIE ((uint32_t)0x00000004)
#define RTC_TAFCR_TAMP1TRG ((uint32_t)0x00000002)
#define RTC_TAFCR_TAMP1E ((uint32_t)0x00000001)
+/******************** Bits definition for RTC_ALRMASSR register *************/
+#define RTC_ALRMASSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMASSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMASSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMASSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMASSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMASSR_SS ((uint32_t)0x00007FFF)
+
+/******************** Bits definition for RTC_ALRMBSSR register *************/
+#define RTC_ALRMBSSR_MASKSS ((uint32_t)0x0F000000)
+#define RTC_ALRMBSSR_MASKSS_0 ((uint32_t)0x01000000)
+#define RTC_ALRMBSSR_MASKSS_1 ((uint32_t)0x02000000)
+#define RTC_ALRMBSSR_MASKSS_2 ((uint32_t)0x04000000)
+#define RTC_ALRMBSSR_MASKSS_3 ((uint32_t)0x08000000)
+#define RTC_ALRMBSSR_SS ((uint32_t)0x00007FFF)
+
/******************** Bits definition for RTC_BKP0R register ****************/
#define RTC_BKP0R ((uint32_t)0xFFFFFFFF)
@@ -3232,6 +4152,201 @@ typedef struct /******************** Bits definition for RTC_BKP19R register ***************/
#define RTC_BKP19R ((uint32_t)0xFFFFFFFF)
+/******************** Bits definition for RTC_BKP20R register ***************/
+#define RTC_BKP20R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP21R register ***************/
+#define RTC_BKP21R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP22R register ***************/
+#define RTC_BKP22R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP23R register ***************/
+#define RTC_BKP23R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP24R register ***************/
+#define RTC_BKP24R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP25R register ***************/
+#define RTC_BKP25R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP26R register ***************/
+#define RTC_BKP26R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP27R register ***************/
+#define RTC_BKP27R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP28R register ***************/
+#define RTC_BKP28R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP29R register ***************/
+#define RTC_BKP29R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP30R register ***************/
+#define RTC_BKP30R ((uint32_t)0xFFFFFFFF)
+
+/******************** Bits definition for RTC_BKP31R register ***************/
+#define RTC_BKP31R ((uint32_t)0xFFFFFFFF)
+
+/******************************************************************************/
+/* */
+/* SD host Interface */
+/* */
+/******************************************************************************/
+
+/****************** Bit definition for SDIO_POWER register ******************/
+#define SDIO_POWER_PWRCTRL ((uint8_t)0x03) /*!< PWRCTRL[1:0] bits (Power supply control bits) */
+#define SDIO_POWER_PWRCTRL_0 ((uint8_t)0x01) /*!< Bit 0 */
+#define SDIO_POWER_PWRCTRL_1 ((uint8_t)0x02) /*!< Bit 1 */
+
+/****************** Bit definition for SDIO_CLKCR register ******************/
+#define SDIO_CLKCR_CLKDIV ((uint16_t)0x00FF) /*!< Clock divide factor */
+#define SDIO_CLKCR_CLKEN ((uint16_t)0x0100) /*!< Clock enable bit */
+#define SDIO_CLKCR_PWRSAV ((uint16_t)0x0200) /*!< Power saving configuration bit */
+#define SDIO_CLKCR_BYPASS ((uint16_t)0x0400) /*!< Clock divider bypass enable bit */
+
+#define SDIO_CLKCR_WIDBUS ((uint16_t)0x1800) /*!< WIDBUS[1:0] bits (Wide bus mode enable bit) */
+#define SDIO_CLKCR_WIDBUS_0 ((uint16_t)0x0800) /*!< Bit 0 */
+#define SDIO_CLKCR_WIDBUS_1 ((uint16_t)0x1000) /*!< Bit 1 */
+
+#define SDIO_CLKCR_NEGEDGE ((uint16_t)0x2000) /*!< SDIO_CK dephasing selection bit */
+#define SDIO_CLKCR_HWFC_EN ((uint16_t)0x4000) /*!< HW Flow Control enable */
+
+/******************* Bit definition for SDIO_ARG register *******************/
+#define SDIO_ARG_CMDARG ((uint32_t)0xFFFFFFFF) /*!< Command argument */
+
+/******************* Bit definition for SDIO_CMD register *******************/
+#define SDIO_CMD_CMDINDEX ((uint16_t)0x003F) /*!< Command Index */
+
+#define SDIO_CMD_WAITRESP ((uint16_t)0x00C0) /*!< WAITRESP[1:0] bits (Wait for response bits) */
+#define SDIO_CMD_WAITRESP_0 ((uint16_t)0x0040) /*!< Bit 0 */
+#define SDIO_CMD_WAITRESP_1 ((uint16_t)0x0080) /*!< Bit 1 */
+
+#define SDIO_CMD_WAITINT ((uint16_t)0x0100) /*!< CPSM Waits for Interrupt Request */
+#define SDIO_CMD_WAITPEND ((uint16_t)0x0200) /*!< CPSM Waits for ends of data transfer (CmdPend internal signal) */
+#define SDIO_CMD_CPSMEN ((uint16_t)0x0400) /*!< Command path state machine (CPSM) Enable bit */
+#define SDIO_CMD_SDIOSUSPEND ((uint16_t)0x0800) /*!< SD I/O suspend command */
+#define SDIO_CMD_ENCMDCOMPL ((uint16_t)0x1000) /*!< Enable CMD completion */
+#define SDIO_CMD_NIEN ((uint16_t)0x2000) /*!< Not Interrupt Enable */
+#define SDIO_CMD_CEATACMD ((uint16_t)0x4000) /*!< CE-ATA command */
+
+/***************** Bit definition for SDIO_RESPCMD register *****************/
+#define SDIO_RESPCMD_RESPCMD ((uint8_t)0x3F) /*!< Response command index */
+
+/****************** Bit definition for SDIO_RESP0 register ******************/
+#define SDIO_RESP0_CARDSTATUS0 ((uint32_t)0xFFFFFFFF) /*!< Card Status */
+
+/****************** Bit definition for SDIO_RESP1 register ******************/
+#define SDIO_RESP1_CARDSTATUS1 ((uint32_t)0xFFFFFFFF) /*!< Card Status */
+
+/****************** Bit definition for SDIO_RESP2 register ******************/
+#define SDIO_RESP2_CARDSTATUS2 ((uint32_t)0xFFFFFFFF) /*!< Card Status */
+
+/****************** Bit definition for SDIO_RESP3 register ******************/
+#define SDIO_RESP3_CARDSTATUS3 ((uint32_t)0xFFFFFFFF) /*!< Card Status */
+
+/****************** Bit definition for SDIO_RESP4 register ******************/
+#define SDIO_RESP4_CARDSTATUS4 ((uint32_t)0xFFFFFFFF) /*!< Card Status */
+
+/****************** Bit definition for SDIO_DTIMER register *****************/
+#define SDIO_DTIMER_DATATIME ((uint32_t)0xFFFFFFFF) /*!< Data timeout period. */
+
+/****************** Bit definition for SDIO_DLEN register *******************/
+#define SDIO_DLEN_DATALENGTH ((uint32_t)0x01FFFFFF) /*!< Data length value */
+
+/****************** Bit definition for SDIO_DCTRL register ******************/
+#define SDIO_DCTRL_DTEN ((uint16_t)0x0001) /*!< Data transfer enabled bit */
+#define SDIO_DCTRL_DTDIR ((uint16_t)0x0002) /*!< Data transfer direction selection */
+#define SDIO_DCTRL_DTMODE ((uint16_t)0x0004) /*!< Data transfer mode selection */
+#define SDIO_DCTRL_DMAEN ((uint16_t)0x0008) /*!< DMA enabled bit */
+
+#define SDIO_DCTRL_DBLOCKSIZE ((uint16_t)0x00F0) /*!< DBLOCKSIZE[3:0] bits (Data block size) */
+#define SDIO_DCTRL_DBLOCKSIZE_0 ((uint16_t)0x0010) /*!< Bit 0 */
+#define SDIO_DCTRL_DBLOCKSIZE_1 ((uint16_t)0x0020) /*!< Bit 1 */
+#define SDIO_DCTRL_DBLOCKSIZE_2 ((uint16_t)0x0040) /*!< Bit 2 */
+#define SDIO_DCTRL_DBLOCKSIZE_3 ((uint16_t)0x0080) /*!< Bit 3 */
+
+#define SDIO_DCTRL_RWSTART ((uint16_t)0x0100) /*!< Read wait start */
+#define SDIO_DCTRL_RWSTOP ((uint16_t)0x0200) /*!< Read wait stop */
+#define SDIO_DCTRL_RWMOD ((uint16_t)0x0400) /*!< Read wait mode */
+#define SDIO_DCTRL_SDIOEN ((uint16_t)0x0800) /*!< SD I/O enable functions */
+
+/****************** Bit definition for SDIO_DCOUNT register *****************/
+#define SDIO_DCOUNT_DATACOUNT ((uint32_t)0x01FFFFFF) /*!< Data count value */
+
+/****************** Bit definition for SDIO_STA register ********************/
+#define SDIO_STA_CCRCFAIL ((uint32_t)0x00000001) /*!< Command response received (CRC check failed) */
+#define SDIO_STA_DCRCFAIL ((uint32_t)0x00000002) /*!< Data block sent/received (CRC check failed) */
+#define SDIO_STA_CTIMEOUT ((uint32_t)0x00000004) /*!< Command response timeout */
+#define SDIO_STA_DTIMEOUT ((uint32_t)0x00000008) /*!< Data timeout */
+#define SDIO_STA_TXUNDERR ((uint32_t)0x00000010) /*!< Transmit FIFO underrun error */
+#define SDIO_STA_RXOVERR ((uint32_t)0x00000020) /*!< Received FIFO overrun error */
+#define SDIO_STA_CMDREND ((uint32_t)0x00000040) /*!< Command response received (CRC check passed) */
+#define SDIO_STA_CMDSENT ((uint32_t)0x00000080) /*!< Command sent (no response required) */
+#define SDIO_STA_DATAEND ((uint32_t)0x00000100) /*!< Data end (data counter, SDIDCOUNT, is zero) */
+#define SDIO_STA_STBITERR ((uint32_t)0x00000200) /*!< Start bit not detected on all data signals in wide bus mode */
+#define SDIO_STA_DBCKEND ((uint32_t)0x00000400) /*!< Data block sent/received (CRC check passed) */
+#define SDIO_STA_CMDACT ((uint32_t)0x00000800) /*!< Command transfer in progress */
+#define SDIO_STA_TXACT ((uint32_t)0x00001000) /*!< Data transmit in progress */
+#define SDIO_STA_RXACT ((uint32_t)0x00002000) /*!< Data receive in progress */
+#define SDIO_STA_TXFIFOHE ((uint32_t)0x00004000) /*!< Transmit FIFO Half Empty: at least 8 words can be written into the FIFO */
+#define SDIO_STA_RXFIFOHF ((uint32_t)0x00008000) /*!< Receive FIFO Half Full: there are at least 8 words in the FIFO */
+#define SDIO_STA_TXFIFOF ((uint32_t)0x00010000) /*!< Transmit FIFO full */
+#define SDIO_STA_RXFIFOF ((uint32_t)0x00020000) /*!< Receive FIFO full */
+#define SDIO_STA_TXFIFOE ((uint32_t)0x00040000) /*!< Transmit FIFO empty */
+#define SDIO_STA_RXFIFOE ((uint32_t)0x00080000) /*!< Receive FIFO empty */
+#define SDIO_STA_TXDAVL ((uint32_t)0x00100000) /*!< Data available in transmit FIFO */
+#define SDIO_STA_RXDAVL ((uint32_t)0x00200000) /*!< Data available in receive FIFO */
+#define SDIO_STA_SDIOIT ((uint32_t)0x00400000) /*!< SDIO interrupt received */
+#define SDIO_STA_CEATAEND ((uint32_t)0x00800000) /*!< CE-ATA command completion signal received for CMD61 */
+
+/******************* Bit definition for SDIO_ICR register *******************/
+#define SDIO_ICR_CCRCFAILC ((uint32_t)0x00000001) /*!< CCRCFAIL flag clear bit */
+#define SDIO_ICR_DCRCFAILC ((uint32_t)0x00000002) /*!< DCRCFAIL flag clear bit */
+#define SDIO_ICR_CTIMEOUTC ((uint32_t)0x00000004) /*!< CTIMEOUT flag clear bit */
+#define SDIO_ICR_DTIMEOUTC ((uint32_t)0x00000008) /*!< DTIMEOUT flag clear bit */
+#define SDIO_ICR_TXUNDERRC ((uint32_t)0x00000010) /*!< TXUNDERR flag clear bit */
+#define SDIO_ICR_RXOVERRC ((uint32_t)0x00000020) /*!< RXOVERR flag clear bit */
+#define SDIO_ICR_CMDRENDC ((uint32_t)0x00000040) /*!< CMDREND flag clear bit */
+#define SDIO_ICR_CMDSENTC ((uint32_t)0x00000080) /*!< CMDSENT flag clear bit */
+#define SDIO_ICR_DATAENDC ((uint32_t)0x00000100) /*!< DATAEND flag clear bit */
+#define SDIO_ICR_STBITERRC ((uint32_t)0x00000200) /*!< STBITERR flag clear bit */
+#define SDIO_ICR_DBCKENDC ((uint32_t)0x00000400) /*!< DBCKEND flag clear bit */
+#define SDIO_ICR_SDIOITC ((uint32_t)0x00400000) /*!< SDIOIT flag clear bit */
+#define SDIO_ICR_CEATAENDC ((uint32_t)0x00800000) /*!< CEATAEND flag clear bit */
+
+/****************** Bit definition for SDIO_MASK register *******************/
+#define SDIO_MASK_CCRCFAILIE ((uint32_t)0x00000001) /*!< Command CRC Fail Interrupt Enable */
+#define SDIO_MASK_DCRCFAILIE ((uint32_t)0x00000002) /*!< Data CRC Fail Interrupt Enable */
+#define SDIO_MASK_CTIMEOUTIE ((uint32_t)0x00000004) /*!< Command TimeOut Interrupt Enable */
+#define SDIO_MASK_DTIMEOUTIE ((uint32_t)0x00000008) /*!< Data TimeOut Interrupt Enable */
+#define SDIO_MASK_TXUNDERRIE ((uint32_t)0x00000010) /*!< Tx FIFO UnderRun Error Interrupt Enable */
+#define SDIO_MASK_RXOVERRIE ((uint32_t)0x00000020) /*!< Rx FIFO OverRun Error Interrupt Enable */
+#define SDIO_MASK_CMDRENDIE ((uint32_t)0x00000040) /*!< Command Response Received Interrupt Enable */
+#define SDIO_MASK_CMDSENTIE ((uint32_t)0x00000080) /*!< Command Sent Interrupt Enable */
+#define SDIO_MASK_DATAENDIE ((uint32_t)0x00000100) /*!< Data End Interrupt Enable */
+#define SDIO_MASK_STBITERRIE ((uint32_t)0x00000200) /*!< Start Bit Error Interrupt Enable */
+#define SDIO_MASK_DBCKENDIE ((uint32_t)0x00000400) /*!< Data Block End Interrupt Enable */
+#define SDIO_MASK_CMDACTIE ((uint32_t)0x00000800) /*!< Command Acting Interrupt Enable */
+#define SDIO_MASK_TXACTIE ((uint32_t)0x00001000) /*!< Data Transmit Acting Interrupt Enable */
+#define SDIO_MASK_RXACTIE ((uint32_t)0x00002000) /*!< Data receive acting interrupt enabled */
+#define SDIO_MASK_TXFIFOHEIE ((uint32_t)0x00004000) /*!< Tx FIFO Half Empty interrupt Enable */
+#define SDIO_MASK_RXFIFOHFIE ((uint32_t)0x00008000) /*!< Rx FIFO Half Full interrupt Enable */
+#define SDIO_MASK_TXFIFOFIE ((uint32_t)0x00010000) /*!< Tx FIFO Full interrupt Enable */
+#define SDIO_MASK_RXFIFOFIE ((uint32_t)0x00020000) /*!< Rx FIFO Full interrupt Enable */
+#define SDIO_MASK_TXFIFOEIE ((uint32_t)0x00040000) /*!< Tx FIFO Empty interrupt Enable */
+#define SDIO_MASK_RXFIFOEIE ((uint32_t)0x00080000) /*!< Rx FIFO Empty interrupt Enable */
+#define SDIO_MASK_TXDAVLIE ((uint32_t)0x00100000) /*!< Data available in Tx FIFO interrupt Enable */
+#define SDIO_MASK_RXDAVLIE ((uint32_t)0x00200000) /*!< Data available in Rx FIFO interrupt Enable */
+#define SDIO_MASK_SDIOITIE ((uint32_t)0x00400000) /*!< SDIO Mode Interrupt Received interrupt Enable */
+#define SDIO_MASK_CEATAENDIE ((uint32_t)0x00800000) /*!< CE-ATA command completion signal received Interrupt Enable */
+
+/***************** Bit definition for SDIO_FIFOCNT register *****************/
+#define SDIO_FIFOCNT_FIFOCOUNT ((uint32_t)0x00FFFFFF) /*!< Remaining number of words to be written to or read from the FIFO */
+
+/****************** Bit definition for SDIO_FIFO register *******************/
+#define SDIO_FIFO_FIFODATA ((uint32_t)0xFFFFFFFF) /*!< Receive and transmit FIFO data */
+
/******************************************************************************/
/* */
/* Serial Peripheral Interface (SPI) */
@@ -3263,6 +4378,7 @@ typedef struct #define SPI_CR2_RXDMAEN ((uint8_t)0x01) /*!< Rx Buffer DMA Enable */
#define SPI_CR2_TXDMAEN ((uint8_t)0x02) /*!< Tx Buffer DMA Enable */
#define SPI_CR2_SSOE ((uint8_t)0x04) /*!< SS Output Enable */
+#define SPI_CR2_FRF ((uint8_t)0x08) /*!< Frame format */
#define SPI_CR2_ERRIE ((uint8_t)0x20) /*!< Error Interrupt Enable */
#define SPI_CR2_RXNEIE ((uint8_t)0x40) /*!< RX buffer Not Empty Interrupt Enable */
#define SPI_CR2_TXEIE ((uint8_t)0x80) /*!< Tx buffer Empty Interrupt Enable */
@@ -3270,6 +4386,8 @@ typedef struct /******************** Bit definition for SPI_SR register ********************/
#define SPI_SR_RXNE ((uint8_t)0x01) /*!< Receive buffer Not Empty */
#define SPI_SR_TXE ((uint8_t)0x02) /*!< Transmit buffer Empty */
+#define SPI_SR_CHSIDE ((uint8_t)0x04) /*!< Channel side */
+#define SPI_SR_UDR ((uint8_t)0x08) /*!< Underrun flag */
#define SPI_SR_CRCERR ((uint8_t)0x10) /*!< CRC Error flag */
#define SPI_SR_MODF ((uint8_t)0x20) /*!< Mode fault */
#define SPI_SR_OVR ((uint8_t)0x40) /*!< Overrun flag */
@@ -3287,6 +4405,33 @@ typedef struct /****************** Bit definition for SPI_TXCRCR register ******************/
#define SPI_TXCRCR_TXCRC ((uint16_t)0xFFFF) /*!< Tx CRC Register */
+/****************** Bit definition for SPI_I2SCFGR register *****************/
+#define SPI_I2SCFGR_CHLEN ((uint16_t)0x0001) /*!<Channel length (number of bits per audio channel) */
+
+#define SPI_I2SCFGR_DATLEN ((uint16_t)0x0006) /*!<DATLEN[1:0] bits (Data length to be transferred) */
+#define SPI_I2SCFGR_DATLEN_0 ((uint16_t)0x0002) /*!<Bit 0 */
+#define SPI_I2SCFGR_DATLEN_1 ((uint16_t)0x0004) /*!<Bit 1 */
+
+#define SPI_I2SCFGR_CKPOL ((uint16_t)0x0008) /*!<steady state clock polarity */
+
+#define SPI_I2SCFGR_I2SSTD ((uint16_t)0x0030) /*!<I2SSTD[1:0] bits (I2S standard selection) */
+#define SPI_I2SCFGR_I2SSTD_0 ((uint16_t)0x0010) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SSTD_1 ((uint16_t)0x0020) /*!<Bit 1 */
+
+#define SPI_I2SCFGR_PCMSYNC ((uint16_t)0x0080) /*!<PCM frame synchronization */
+
+#define SPI_I2SCFGR_I2SCFG ((uint16_t)0x0300) /*!<I2SCFG[1:0] bits (I2S configuration mode) */
+#define SPI_I2SCFGR_I2SCFG_0 ((uint16_t)0x0100) /*!<Bit 0 */
+#define SPI_I2SCFGR_I2SCFG_1 ((uint16_t)0x0200) /*!<Bit 1 */
+
+#define SPI_I2SCFGR_I2SE ((uint16_t)0x0400) /*!<I2S Enable */
+#define SPI_I2SCFGR_I2SMOD ((uint16_t)0x0800) /*!<I2S mode selection */
+
+/****************** Bit definition for SPI_I2SPR register *******************/
+#define SPI_I2SPR_I2SDIV ((uint16_t)0x00FF) /*!<I2S Linear prescaler */
+#define SPI_I2SPR_ODD ((uint16_t)0x0100) /*!<Odd factor for the prescaler */
+#define SPI_I2SPR_MCKOE ((uint16_t)0x0200) /*!<Master Clock Output Enable */
+
/******************************************************************************/
/* */
/* System Configuration (SYSCFG) */
@@ -3296,6 +4441,9 @@ typedef struct #define SYSCFG_MEMRMP_MEM_MODE ((uint32_t)0x00000003) /*!< SYSCFG_Memory Remap Config */
#define SYSCFG_MEMRMP_MEM_MODE_0 ((uint32_t)0x00000001) /*!< Bit 0 */
#define SYSCFG_MEMRMP_MEM_MODE_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define SYSCFG_MEMRMP_BOOT_MODE ((uint32_t)0x00000300) /*!< Boot mode Config */
+#define SYSCFG_MEMRMP_BOOT_MODE_0 ((uint32_t)0x00000100) /*!< Bit 0 */
+#define SYSCFG_MEMRMP_BOOT_MODE_1 ((uint32_t)0x00000200) /*!< Bit 1 */
/***************** Bit definition for SYSCFG_PMC register *******************/
#define SYSCFG_PMC_USB_PU ((uint32_t)0x00000001) /*!< SYSCFG PMC */
@@ -3306,44 +4454,52 @@ typedef struct #define SYSCFG_EXTICR1_EXTI2 ((uint16_t)0x0F00) /*!< EXTI 2 configuration */
#define SYSCFG_EXTICR1_EXTI3 ((uint16_t)0xF000) /*!< EXTI 3 configuration */
-/**
- * @brief EXTI0 configuration
- */
+/**
+ * @brief EXTI0 configuration
+ */
#define SYSCFG_EXTICR1_EXTI0_PA ((uint16_t)0x0000) /*!< PA[0] pin */
#define SYSCFG_EXTICR1_EXTI0_PB ((uint16_t)0x0001) /*!< PB[0] pin */
#define SYSCFG_EXTICR1_EXTI0_PC ((uint16_t)0x0002) /*!< PC[0] pin */
#define SYSCFG_EXTICR1_EXTI0_PD ((uint16_t)0x0003) /*!< PD[0] pin */
#define SYSCFG_EXTICR1_EXTI0_PE ((uint16_t)0x0004) /*!< PE[0] pin */
#define SYSCFG_EXTICR1_EXTI0_PH ((uint16_t)0x0005) /*!< PH[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PF ((uint16_t)0x0006) /*!< PF[0] pin */
+#define SYSCFG_EXTICR1_EXTI0_PG ((uint16_t)0x0007) /*!< PG[0] pin */
-/**
- * @brief EXTI1 configuration
- */
+/**
+ * @brief EXTI1 configuration
+ */
#define SYSCFG_EXTICR1_EXTI1_PA ((uint16_t)0x0000) /*!< PA[1] pin */
#define SYSCFG_EXTICR1_EXTI1_PB ((uint16_t)0x0010) /*!< PB[1] pin */
#define SYSCFG_EXTICR1_EXTI1_PC ((uint16_t)0x0020) /*!< PC[1] pin */
#define SYSCFG_EXTICR1_EXTI1_PD ((uint16_t)0x0030) /*!< PD[1] pin */
#define SYSCFG_EXTICR1_EXTI1_PE ((uint16_t)0x0040) /*!< PE[1] pin */
#define SYSCFG_EXTICR1_EXTI1_PH ((uint16_t)0x0050) /*!< PH[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PF ((uint16_t)0x0060) /*!< PF[1] pin */
+#define SYSCFG_EXTICR1_EXTI1_PG ((uint16_t)0x0070) /*!< PG[1] pin */
-/**
- * @brief EXTI2 configuration
- */
+/**
+ * @brief EXTI2 configuration
+ */
#define SYSCFG_EXTICR1_EXTI2_PA ((uint16_t)0x0000) /*!< PA[2] pin */
#define SYSCFG_EXTICR1_EXTI2_PB ((uint16_t)0x0100) /*!< PB[2] pin */
#define SYSCFG_EXTICR1_EXTI2_PC ((uint16_t)0x0200) /*!< PC[2] pin */
#define SYSCFG_EXTICR1_EXTI2_PD ((uint16_t)0x0300) /*!< PD[2] pin */
#define SYSCFG_EXTICR1_EXTI2_PE ((uint16_t)0x0400) /*!< PE[2] pin */
#define SYSCFG_EXTICR1_EXTI2_PH ((uint16_t)0x0500) /*!< PH[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PF ((uint16_t)0x0600) /*!< PF[2] pin */
+#define SYSCFG_EXTICR1_EXTI2_PG ((uint16_t)0x0700) /*!< PG[2] pin */
-/**
- * @brief EXTI3 configuration
- */
+/**
+ * @brief EXTI3 configuration
+ */
#define SYSCFG_EXTICR1_EXTI3_PA ((uint16_t)0x0000) /*!< PA[3] pin */
#define SYSCFG_EXTICR1_EXTI3_PB ((uint16_t)0x1000) /*!< PB[3] pin */
#define SYSCFG_EXTICR1_EXTI3_PC ((uint16_t)0x2000) /*!< PC[3] pin */
#define SYSCFG_EXTICR1_EXTI3_PD ((uint16_t)0x3000) /*!< PD[3] pin */
#define SYSCFG_EXTICR1_EXTI3_PE ((uint16_t)0x4000) /*!< PE[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PF ((uint16_t)0x3000) /*!< PF[3] pin */
+#define SYSCFG_EXTICR1_EXTI3_PG ((uint16_t)0x4000) /*!< PG[3] pin */
/***************** Bit definition for SYSCFG_EXTICR2 register *****************/
#define SYSCFG_EXTICR2_EXTI4 ((uint16_t)0x000F) /*!< EXTI 4 configuration */
@@ -3351,83 +4507,99 @@ typedef struct #define SYSCFG_EXTICR2_EXTI6 ((uint16_t)0x0F00) /*!< EXTI 6 configuration */
#define SYSCFG_EXTICR2_EXTI7 ((uint16_t)0xF000) /*!< EXTI 7 configuration */
-/**
- * @brief EXTI4 configuration
- */
+/**
+ * @brief EXTI4 configuration
+ */
#define SYSCFG_EXTICR2_EXTI4_PA ((uint16_t)0x0000) /*!< PA[4] pin */
#define SYSCFG_EXTICR2_EXTI4_PB ((uint16_t)0x0001) /*!< PB[4] pin */
#define SYSCFG_EXTICR2_EXTI4_PC ((uint16_t)0x0002) /*!< PC[4] pin */
#define SYSCFG_EXTICR2_EXTI4_PD ((uint16_t)0x0003) /*!< PD[4] pin */
#define SYSCFG_EXTICR2_EXTI4_PE ((uint16_t)0x0004) /*!< PE[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PF ((uint16_t)0x0006) /*!< PF[4] pin */
+#define SYSCFG_EXTICR2_EXTI4_PG ((uint16_t)0x0007) /*!< PG[4] pin */
-/**
- * @brief EXTI5 configuration
- */
+/**
+ * @brief EXTI5 configuration
+ */
#define SYSCFG_EXTICR2_EXTI5_PA ((uint16_t)0x0000) /*!< PA[5] pin */
#define SYSCFG_EXTICR2_EXTI5_PB ((uint16_t)0x0010) /*!< PB[5] pin */
#define SYSCFG_EXTICR2_EXTI5_PC ((uint16_t)0x0020) /*!< PC[5] pin */
#define SYSCFG_EXTICR2_EXTI5_PD ((uint16_t)0x0030) /*!< PD[5] pin */
#define SYSCFG_EXTICR2_EXTI5_PE ((uint16_t)0x0040) /*!< PE[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PF ((uint16_t)0x0060) /*!< PF[5] pin */
+#define SYSCFG_EXTICR2_EXTI5_PG ((uint16_t)0x0070) /*!< PG[5] pin */
-/**
- * @brief EXTI6 configuration
- */
+/**
+ * @brief EXTI6 configuration
+ */
#define SYSCFG_EXTICR2_EXTI6_PA ((uint16_t)0x0000) /*!< PA[6] pin */
#define SYSCFG_EXTICR2_EXTI6_PB ((uint16_t)0x0100) /*!< PB[6] pin */
#define SYSCFG_EXTICR2_EXTI6_PC ((uint16_t)0x0200) /*!< PC[6] pin */
#define SYSCFG_EXTICR2_EXTI6_PD ((uint16_t)0x0300) /*!< PD[6] pin */
#define SYSCFG_EXTICR2_EXTI6_PE ((uint16_t)0x0400) /*!< PE[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PF ((uint16_t)0x0600) /*!< PF[6] pin */
+#define SYSCFG_EXTICR2_EXTI6_PG ((uint16_t)0x0700) /*!< PG[6] pin */
-/**
- * @brief EXTI7 configuration
- */
+/**
+ * @brief EXTI7 configuration
+ */
#define SYSCFG_EXTICR2_EXTI7_PA ((uint16_t)0x0000) /*!< PA[7] pin */
#define SYSCFG_EXTICR2_EXTI7_PB ((uint16_t)0x1000) /*!< PB[7] pin */
#define SYSCFG_EXTICR2_EXTI7_PC ((uint16_t)0x2000) /*!< PC[7] pin */
#define SYSCFG_EXTICR2_EXTI7_PD ((uint16_t)0x3000) /*!< PD[7] pin */
#define SYSCFG_EXTICR2_EXTI7_PE ((uint16_t)0x4000) /*!< PE[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PF ((uint16_t)0x6000) /*!< PF[7] pin */
+#define SYSCFG_EXTICR2_EXTI7_PG ((uint16_t)0x7000) /*!< PG[7] pin */
/***************** Bit definition for SYSCFG_EXTICR3 register *****************/
#define SYSCFG_EXTICR3_EXTI8 ((uint16_t)0x000F) /*!< EXTI 8 configuration */
#define SYSCFG_EXTICR3_EXTI9 ((uint16_t)0x00F0) /*!< EXTI 9 configuration */
#define SYSCFG_EXTICR3_EXTI10 ((uint16_t)0x0F00) /*!< EXTI 10 configuration */
#define SYSCFG_EXTICR3_EXTI11 ((uint16_t)0xF000) /*!< EXTI 11 configuration */
-
-/**
- * @brief EXTI8 configuration
- */
+
+/**
+ * @brief EXTI8 configuration
+ */
#define SYSCFG_EXTICR3_EXTI8_PA ((uint16_t)0x0000) /*!< PA[8] pin */
#define SYSCFG_EXTICR3_EXTI8_PB ((uint16_t)0x0001) /*!< PB[8] pin */
#define SYSCFG_EXTICR3_EXTI8_PC ((uint16_t)0x0002) /*!< PC[8] pin */
#define SYSCFG_EXTICR3_EXTI8_PD ((uint16_t)0x0003) /*!< PD[8] pin */
#define SYSCFG_EXTICR3_EXTI8_PE ((uint16_t)0x0004) /*!< PE[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PF ((uint16_t)0x0006) /*!< PF[8] pin */
+#define SYSCFG_EXTICR3_EXTI8_PG ((uint16_t)0x0007) /*!< PG[8] pin */
-/**
- * @brief EXTI9 configuration
- */
+/**
+ * @brief EXTI9 configuration
+ */
#define SYSCFG_EXTICR3_EXTI9_PA ((uint16_t)0x0000) /*!< PA[9] pin */
#define SYSCFG_EXTICR3_EXTI9_PB ((uint16_t)0x0010) /*!< PB[9] pin */
#define SYSCFG_EXTICR3_EXTI9_PC ((uint16_t)0x0020) /*!< PC[9] pin */
#define SYSCFG_EXTICR3_EXTI9_PD ((uint16_t)0x0030) /*!< PD[9] pin */
#define SYSCFG_EXTICR3_EXTI9_PE ((uint16_t)0x0040) /*!< PE[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PF ((uint16_t)0x0060) /*!< PF[9] pin */
+#define SYSCFG_EXTICR3_EXTI9_PG ((uint16_t)0x0070) /*!< PG[9] pin */
-/**
- * @brief EXTI10 configuration
- */
+/**
+ * @brief EXTI10 configuration
+ */
#define SYSCFG_EXTICR3_EXTI10_PA ((uint16_t)0x0000) /*!< PA[10] pin */
#define SYSCFG_EXTICR3_EXTI10_PB ((uint16_t)0x0100) /*!< PB[10] pin */
#define SYSCFG_EXTICR3_EXTI10_PC ((uint16_t)0x0200) /*!< PC[10] pin */
#define SYSCFG_EXTICR3_EXTI10_PD ((uint16_t)0x0300) /*!< PD[10] pin */
#define SYSCFG_EXTICR3_EXTI10_PE ((uint16_t)0x0400) /*!< PE[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PF ((uint16_t)0x0600) /*!< PF[10] pin */
+#define SYSCFG_EXTICR3_EXTI10_PG ((uint16_t)0x0700) /*!< PG[10] pin */
-/**
- * @brief EXTI11 configuration
- */
+/**
+ * @brief EXTI11 configuration
+ */
#define SYSCFG_EXTICR3_EXTI11_PA ((uint16_t)0x0000) /*!< PA[11] pin */
#define SYSCFG_EXTICR3_EXTI11_PB ((uint16_t)0x1000) /*!< PB[11] pin */
#define SYSCFG_EXTICR3_EXTI11_PC ((uint16_t)0x2000) /*!< PC[11] pin */
#define SYSCFG_EXTICR3_EXTI11_PD ((uint16_t)0x3000) /*!< PD[11] pin */
#define SYSCFG_EXTICR3_EXTI11_PE ((uint16_t)0x4000) /*!< PE[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PF ((uint16_t)0x6000) /*!< PF[11] pin */
+#define SYSCFG_EXTICR3_EXTI11_PG ((uint16_t)0x7000) /*!< PG[11] pin */
/***************** Bit definition for SYSCFG_EXTICR4 register *****************/
#define SYSCFG_EXTICR4_EXTI12 ((uint16_t)0x000F) /*!< EXTI 12 configuration */
@@ -3435,42 +4607,50 @@ typedef struct #define SYSCFG_EXTICR4_EXTI14 ((uint16_t)0x0F00) /*!< EXTI 14 configuration */
#define SYSCFG_EXTICR4_EXTI15 ((uint16_t)0xF000) /*!< EXTI 15 configuration */
-/**
- * @brief EXTI12 configuration
- */
+/**
+ * @brief EXTI12 configuration
+ */
#define SYSCFG_EXTICR4_EXTI12_PA ((uint16_t)0x0000) /*!< PA[12] pin */
#define SYSCFG_EXTICR4_EXTI12_PB ((uint16_t)0x0001) /*!< PB[12] pin */
#define SYSCFG_EXTICR4_EXTI12_PC ((uint16_t)0x0002) /*!< PC[12] pin */
#define SYSCFG_EXTICR4_EXTI12_PD ((uint16_t)0x0003) /*!< PD[12] pin */
#define SYSCFG_EXTICR4_EXTI12_PE ((uint16_t)0x0004) /*!< PE[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PF ((uint16_t)0x0006) /*!< PF[12] pin */
+#define SYSCFG_EXTICR4_EXTI12_PG ((uint16_t)0x0007) /*!< PG[12] pin */
-/**
- * @brief EXTI13 configuration
- */
+/**
+ * @brief EXTI13 configuration
+ */
#define SYSCFG_EXTICR4_EXTI13_PA ((uint16_t)0x0000) /*!< PA[13] pin */
#define SYSCFG_EXTICR4_EXTI13_PB ((uint16_t)0x0010) /*!< PB[13] pin */
#define SYSCFG_EXTICR4_EXTI13_PC ((uint16_t)0x0020) /*!< PC[13] pin */
#define SYSCFG_EXTICR4_EXTI13_PD ((uint16_t)0x0030) /*!< PD[13] pin */
#define SYSCFG_EXTICR4_EXTI13_PE ((uint16_t)0x0040) /*!< PE[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PF ((uint16_t)0x0060) /*!< PF[13] pin */
+#define SYSCFG_EXTICR4_EXTI13_PG ((uint16_t)0x0070) /*!< PG[13] pin */
-/**
- * @brief EXTI14 configuration
- */
+/**
+ * @brief EXTI14 configuration
+ */
#define SYSCFG_EXTICR4_EXTI14_PA ((uint16_t)0x0000) /*!< PA[14] pin */
#define SYSCFG_EXTICR4_EXTI14_PB ((uint16_t)0x0100) /*!< PB[14] pin */
#define SYSCFG_EXTICR4_EXTI14_PC ((uint16_t)0x0200) /*!< PC[14] pin */
#define SYSCFG_EXTICR4_EXTI14_PD ((uint16_t)0x0300) /*!< PD[14] pin */
#define SYSCFG_EXTICR4_EXTI14_PE ((uint16_t)0x0400) /*!< PE[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PF ((uint16_t)0x0600) /*!< PF[14] pin */
+#define SYSCFG_EXTICR4_EXTI14_PG ((uint16_t)0x0700) /*!< PG[14] pin */
-/**
- * @brief EXTI15 configuration
- */
+/**
+ * @brief EXTI15 configuration
+ */
#define SYSCFG_EXTICR4_EXTI15_PA ((uint16_t)0x0000) /*!< PA[15] pin */
#define SYSCFG_EXTICR4_EXTI15_PB ((uint16_t)0x1000) /*!< PB[15] pin */
#define SYSCFG_EXTICR4_EXTI15_PC ((uint16_t)0x2000) /*!< PC[15] pin */
#define SYSCFG_EXTICR4_EXTI15_PD ((uint16_t)0x3000) /*!< PD[15] pin */
#define SYSCFG_EXTICR4_EXTI15_PE ((uint16_t)0x4000) /*!< PE[15] pin */
-
+#define SYSCFG_EXTICR4_EXTI15_PF ((uint16_t)0x6000) /*!< PF[15] pin */
+#define SYSCFG_EXTICR4_EXTI15_PG ((uint16_t)0x7000) /*!< PG[15] pin */
+
/******************************************************************************/
/* */
/* Routing Interface (RI) */
@@ -3529,6 +4709,7 @@ typedef struct #define RI_ASCR1_CH_13 ((uint32_t)0x00002000) /*!< Bit 13 */
#define RI_ASCR1_CH_14 ((uint32_t)0x00004000) /*!< Bit 14 */
#define RI_ASCR1_CH_15 ((uint32_t)0x00008000) /*!< Bit 15 */
+#define RI_ASCR1_CH_31 ((uint32_t)0x00010000) /*!< Bit 16 */
#define RI_ASCR1_CH_18 ((uint32_t)0x00040000) /*!< Bit 18 */
#define RI_ASCR1_CH_19 ((uint32_t)0x00080000) /*!< Bit 19 */
#define RI_ASCR1_CH_20 ((uint32_t)0x00100000) /*!< Bit 20 */
@@ -3537,8 +4718,11 @@ typedef struct #define RI_ASCR1_CH_23 ((uint32_t)0x00800000) /*!< Bit 23 */
#define RI_ASCR1_CH_24 ((uint32_t)0x01000000) /*!< Bit 24 */
#define RI_ASCR1_CH_25 ((uint32_t)0x02000000) /*!< Bit 25 */
-
#define RI_ASCR1_VCOMP ((uint32_t)0x04000000) /*!< ADC analog switch selection for internal node to COMP1 */
+#define RI_ASCR1_CH_27 ((uint32_t)0x00400000) /*!< Bit 27 */
+#define RI_ASCR1_CH_28 ((uint32_t)0x00800000) /*!< Bit 28 */
+#define RI_ASCR1_CH_29 ((uint32_t)0x01000000) /*!< Bit 29 */
+#define RI_ASCR1_CH_30 ((uint32_t)0x02000000) /*!< Bit 30 */
#define RI_ASCR1_SCM ((uint32_t)0x80000000) /*!< I/O Switch control mode */
/******************** Bit definition for RI_ASCR2 register ********************/
@@ -3554,7 +4738,21 @@ typedef struct #define RI_ASCR2_GR4_1 ((uint32_t)0x00000200) /*!< GR4-1 selection bit */
#define RI_ASCR2_GR4_2 ((uint32_t)0x00000400) /*!< GR4-2 selection bit */
#define RI_ASCR2_GR4_3 ((uint32_t)0x00000800) /*!< GR4-3 selection bit */
-
+#define RI_ASCR2_GR4_4 ((uint32_t)0x00008000) /*!< GR4-4 selection bit */
+#define RI_ASCR2_CH0b ((uint32_t)0x00010000) /*!< CH0b selection bit */
+#define RI_ASCR2_CH1b ((uint32_t)0x00020000) /*!< CH1b selection bit */
+#define RI_ASCR2_CH2b ((uint32_t)0x00040000) /*!< CH2b selection bit */
+#define RI_ASCR2_CH3b ((uint32_t)0x00080000) /*!< CH3b selection bit */
+#define RI_ASCR2_CH6b ((uint32_t)0x00100000) /*!< CH6b selection bit */
+#define RI_ASCR2_CH7b ((uint32_t)0x00200000) /*!< CH7b selection bit */
+#define RI_ASCR2_CH8b ((uint32_t)0x00400000) /*!< CH8b selection bit */
+#define RI_ASCR2_CH9b ((uint32_t)0x00800000) /*!< CH9b selection bit */
+#define RI_ASCR2_CH10b ((uint32_t)0x01000000) /*!< CH10b selection bit */
+#define RI_ASCR2_CH11b ((uint32_t)0x02000000) /*!< CH11b selection bit */
+#define RI_ASCR2_CH12b ((uint32_t)0x04000000) /*!< CH12b selection bit */
+#define RI_ASCR2_GR6_3 ((uint32_t)0x08000000) /*!< GR6-3 selection bit */
+#define RI_ASCR2_GR6_4 ((uint32_t)0x10000000) /*!< GR6-4 selection bit */
+#define RI_ASCR2_GR5_4 ((uint32_t)0x20000000) /*!< GR5-4 selection bit */
/******************** Bit definition for RI_HYSCR1 register ********************/
#define RI_HYSCR1_PA ((uint32_t)0x0000FFFF) /*!< PA[15:0] Port A Hysteresis selection */
@@ -3649,6 +4847,43 @@ typedef struct #define RI_HYSCR2_PE_14 ((uint32_t)0x00004000) /*!< Bit 14 */
#define RI_HYSCR2_PE_15 ((uint32_t)0x00008000) /*!< Bit 15 */
+#define RI_HYSCR3_PF ((uint32_t)0xFFFF0000) /*!< PF[15:0] Port F Hysteresis selection */
+#define RI_HYSCR3_PF_0 ((uint32_t)0x00010000) /*!< Bit 0 */
+#define RI_HYSCR3_PF_1 ((uint32_t)0x00020000) /*!< Bit 1 */
+#define RI_HYSCR3_PF_2 ((uint32_t)0x00040000) /*!< Bit 2 */
+#define RI_HYSCR3_PF_3 ((uint32_t)0x00080000) /*!< Bit 3 */
+#define RI_HYSCR3_PF_4 ((uint32_t)0x00100000) /*!< Bit 4 */
+#define RI_HYSCR3_PF_5 ((uint32_t)0x00200000) /*!< Bit 5 */
+#define RI_HYSCR3_PF_6 ((uint32_t)0x00400000) /*!< Bit 6 */
+#define RI_HYSCR3_PF_7 ((uint32_t)0x00800000) /*!< Bit 7 */
+#define RI_HYSCR3_PF_8 ((uint32_t)0x01000000) /*!< Bit 8 */
+#define RI_HYSCR3_PF_9 ((uint32_t)0x02000000) /*!< Bit 9 */
+#define RI_HYSCR3_PF_10 ((uint32_t)0x04000000) /*!< Bit 10 */
+#define RI_HYSCR3_PF_11 ((uint32_t)0x08000000) /*!< Bit 11 */
+#define RI_HYSCR3_PF_12 ((uint32_t)0x10000000) /*!< Bit 12 */
+#define RI_HYSCR3_PF_13 ((uint32_t)0x20000000) /*!< Bit 13 */
+#define RI_HYSCR3_PF_14 ((uint32_t)0x40000000) /*!< Bit 14 */
+#define RI_HYSCR3_PF_15 ((uint32_t)0x80000000) /*!< Bit 15 */
+
+/******************** Bit definition for RI_HYSCR4 register ********************/
+#define RI_HYSCR4_PG ((uint32_t)0x0000FFFF) /*!< PG[15:0] Port G Hysteresis selection */
+#define RI_HYSCR4_PG_0 ((uint32_t)0x00000001) /*!< Bit 0 */
+#define RI_HYSCR4_PG_1 ((uint32_t)0x00000002) /*!< Bit 1 */
+#define RI_HYSCR4_PG_2 ((uint32_t)0x00000004) /*!< Bit 2 */
+#define RI_HYSCR4_PG_3 ((uint32_t)0x00000008) /*!< Bit 3 */
+#define RI_HYSCR4_PG_4 ((uint32_t)0x00000010) /*!< Bit 4 */
+#define RI_HYSCR4_PG_5 ((uint32_t)0x00000020) /*!< Bit 5 */
+#define RI_HYSCR4_PG_6 ((uint32_t)0x00000040) /*!< Bit 6 */
+#define RI_HYSCR4_PG_7 ((uint32_t)0x00000080) /*!< Bit 7 */
+#define RI_HYSCR4_PG_8 ((uint32_t)0x00000100) /*!< Bit 8 */
+#define RI_HYSCR4_PG_9 ((uint32_t)0x00000200) /*!< Bit 9 */
+#define RI_HYSCR4_PG_10 ((uint32_t)0x00000400) /*!< Bit 10 */
+#define RI_HYSCR4_PG_11 ((uint32_t)0x00000800) /*!< Bit 11 */
+#define RI_HYSCR4_PG_12 ((uint32_t)0x00001000) /*!< Bit 12 */
+#define RI_HYSCR4_PG_13 ((uint32_t)0x00002000) /*!< Bit 13 */
+#define RI_HYSCR4_PG_14 ((uint32_t)0x00004000) /*!< Bit 14 */
+#define RI_HYSCR4_PG_15 ((uint32_t)0x00008000) /*!< Bit 15 */
+
/******************************************************************************/
/* */
/* Timers (TIM) */
@@ -3673,8 +4908,6 @@ typedef struct #define TIM_CR1_CKD_1 ((uint16_t)0x0200) /*!<Bit 1 */
/******************* Bit definition for TIM_CR2 register ********************/
-#define TIM_CR2_CCPC ((uint16_t)0x0001) /*!<Capture/Compare Preloaded Control */
-#define TIM_CR2_CCUS ((uint16_t)0x0004) /*!<Capture/Compare Control Update Selection */
#define TIM_CR2_CCDS ((uint16_t)0x0008) /*!<Capture/Compare DMA Selection */
#define TIM_CR2_MMS ((uint16_t)0x0070) /*!<MMS[2:0] bits (Master Mode Selection) */
@@ -3683,13 +4916,6 @@ typedef struct #define TIM_CR2_MMS_2 ((uint16_t)0x0040) /*!<Bit 2 */
#define TIM_CR2_TI1S ((uint16_t)0x0080) /*!<TI1 Selection */
-#define TIM_CR2_OIS1 ((uint16_t)0x0100) /*!<Output Idle state 1 (OC1 output) */
-#define TIM_CR2_OIS1N ((uint16_t)0x0200) /*!<Output Idle state 1 (OC1N output) */
-#define TIM_CR2_OIS2 ((uint16_t)0x0400) /*!<Output Idle state 2 (OC2 output) */
-#define TIM_CR2_OIS2N ((uint16_t)0x0800) /*!<Output Idle state 2 (OC2N output) */
-#define TIM_CR2_OIS3 ((uint16_t)0x1000) /*!<Output Idle state 3 (OC3 output) */
-#define TIM_CR2_OIS3N ((uint16_t)0x2000) /*!<Output Idle state 3 (OC3N output) */
-#define TIM_CR2_OIS4 ((uint16_t)0x4000) /*!<Output Idle state 4 (OC4 output) */
/******************* Bit definition for TIM_SMCR register *******************/
#define TIM_SMCR_SMS ((uint16_t)0x0007) /*!<SMS[2:0] bits (Slave mode selection) */
@@ -3725,15 +4951,12 @@ typedef struct #define TIM_DIER_CC2IE ((uint16_t)0x0004) /*!<Capture/Compare 2 interrupt enable */
#define TIM_DIER_CC3IE ((uint16_t)0x0008) /*!<Capture/Compare 3 interrupt enable */
#define TIM_DIER_CC4IE ((uint16_t)0x0010) /*!<Capture/Compare 4 interrupt enable */
-#define TIM_DIER_COMIE ((uint16_t)0x0020) /*!<COM interrupt enable */
#define TIM_DIER_TIE ((uint16_t)0x0040) /*!<Trigger interrupt enable */
-#define TIM_DIER_BIE ((uint16_t)0x0080) /*!<Break interrupt enable */
#define TIM_DIER_UDE ((uint16_t)0x0100) /*!<Update DMA request enable */
#define TIM_DIER_CC1DE ((uint16_t)0x0200) /*!<Capture/Compare 1 DMA request enable */
#define TIM_DIER_CC2DE ((uint16_t)0x0400) /*!<Capture/Compare 2 DMA request enable */
#define TIM_DIER_CC3DE ((uint16_t)0x0800) /*!<Capture/Compare 3 DMA request enable */
#define TIM_DIER_CC4DE ((uint16_t)0x1000) /*!<Capture/Compare 4 DMA request enable */
-#define TIM_DIER_COMDE ((uint16_t)0x2000) /*!<COM DMA request enable */
#define TIM_DIER_TDE ((uint16_t)0x4000) /*!<Trigger DMA request enable */
/******************** Bit definition for TIM_SR register ********************/
@@ -3742,9 +4965,7 @@ typedef struct #define TIM_SR_CC2IF ((uint16_t)0x0004) /*!<Capture/Compare 2 interrupt Flag */
#define TIM_SR_CC3IF ((uint16_t)0x0008) /*!<Capture/Compare 3 interrupt Flag */
#define TIM_SR_CC4IF ((uint16_t)0x0010) /*!<Capture/Compare 4 interrupt Flag */
-#define TIM_SR_COMIF ((uint16_t)0x0020) /*!<COM interrupt Flag */
#define TIM_SR_TIF ((uint16_t)0x0040) /*!<Trigger interrupt Flag */
-#define TIM_SR_BIF ((uint16_t)0x0080) /*!<Break interrupt Flag */
#define TIM_SR_CC1OF ((uint16_t)0x0200) /*!<Capture/Compare 1 Overcapture Flag */
#define TIM_SR_CC2OF ((uint16_t)0x0400) /*!<Capture/Compare 2 Overcapture Flag */
#define TIM_SR_CC3OF ((uint16_t)0x0800) /*!<Capture/Compare 3 Overcapture Flag */
@@ -3756,10 +4977,8 @@ typedef struct #define TIM_EGR_CC2G ((uint8_t)0x04) /*!<Capture/Compare 2 Generation */
#define TIM_EGR_CC3G ((uint8_t)0x08) /*!<Capture/Compare 3 Generation */
#define TIM_EGR_CC4G ((uint8_t)0x10) /*!<Capture/Compare 4 Generation */
-#define TIM_EGR_COMG ((uint8_t)0x20) /*!<Capture/Compare Control Update Generation */
#define TIM_EGR_TG ((uint8_t)0x40) /*!<Trigger Generation */
-#define TIM_EGR_BG ((uint8_t)0x80) /*!<Break Generation */
-
+
/****************** Bit definition for TIM_CCMR1 register *******************/
#define TIM_CCMR1_CC1S ((uint16_t)0x0003) /*!<CC1S[1:0] bits (Capture/Compare 1 Selection) */
#define TIM_CCMR1_CC1S_0 ((uint16_t)0x0001) /*!<Bit 0 */
@@ -3865,15 +5084,12 @@ typedef struct /******************* Bit definition for TIM_CCER register *******************/
#define TIM_CCER_CC1E ((uint16_t)0x0001) /*!<Capture/Compare 1 output enable */
#define TIM_CCER_CC1P ((uint16_t)0x0002) /*!<Capture/Compare 1 output Polarity */
-#define TIM_CCER_CC1NE ((uint16_t)0x0004) /*!<Capture/Compare 1 Complementary output enable */
#define TIM_CCER_CC1NP ((uint16_t)0x0008) /*!<Capture/Compare 1 Complementary output Polarity */
#define TIM_CCER_CC2E ((uint16_t)0x0010) /*!<Capture/Compare 2 output enable */
#define TIM_CCER_CC2P ((uint16_t)0x0020) /*!<Capture/Compare 2 output Polarity */
-#define TIM_CCER_CC2NE ((uint16_t)0x0040) /*!<Capture/Compare 2 Complementary output enable */
#define TIM_CCER_CC2NP ((uint16_t)0x0080) /*!<Capture/Compare 2 Complementary output Polarity */
#define TIM_CCER_CC3E ((uint16_t)0x0100) /*!<Capture/Compare 3 output enable */
#define TIM_CCER_CC3P ((uint16_t)0x0200) /*!<Capture/Compare 3 output Polarity */
-#define TIM_CCER_CC3NE ((uint16_t)0x0400) /*!<Capture/Compare 3 Complementary output enable */
#define TIM_CCER_CC3NP ((uint16_t)0x0800) /*!<Capture/Compare 3 Complementary output Polarity */
#define TIM_CCER_CC4E ((uint16_t)0x1000) /*!<Capture/Compare 4 output enable */
#define TIM_CCER_CC4P ((uint16_t)0x2000) /*!<Capture/Compare 4 output Polarity */
@@ -3887,10 +5103,7 @@ typedef struct /******************* Bit definition for TIM_ARR register ********************/
#define TIM_ARR_ARR ((uint16_t)0xFFFF) /*!<actual auto-reload Value */
-
-/******************* Bit definition for TIM_RCR register ********************/
-#define TIM_RCR_REP ((uint8_t)0xFF) /*!<Repetition Counter Value */
-
+
/******************* Bit definition for TIM_CCR1 register *******************/
#define TIM_CCR1_CCR1 ((uint16_t)0xFFFF) /*!<Capture/Compare 1 Value */
@@ -4256,7 +5469,7 @@ typedef struct #define USB_DADDR_EF ((uint8_t)0x80) /*!<Enable Function */
-/****************** Bit definition for USB_BTABLE register ******************/
+/****************** Bit definition for USB_BTABLE register ******************/
#define USB_BTABLE_BTABLE ((uint16_t)0xFFF8) /*!<Buffer Table */
/*!< Buffer descriptor table */
@@ -5096,7 +6309,7 @@ typedef struct /**
* @}
- */
+ */
#ifdef USE_STDPERIPH_DRIVER
#include "stm32l1xx_conf.h"
@@ -5138,4 +6351,4 @@ typedef struct * @}
*/
-/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|