diff options
Diffstat (limited to 'os/hal/templates/pwm_lld.c')
| -rw-r--r-- | os/hal/templates/pwm_lld.c | 216 |
1 files changed, 216 insertions, 0 deletions
diff --git a/os/hal/templates/pwm_lld.c b/os/hal/templates/pwm_lld.c new file mode 100644 index 000000000..c33fc0d4b --- /dev/null +++ b/os/hal/templates/pwm_lld.c @@ -0,0 +1,216 @@ +/*
+ ChibiOS/HAL - Copyright (C) 2006-2014 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file PLATFORM/pwm_lld.c
+ * @brief PLATFORM PWM subsystem low level driver header.
+ *
+ * @addtogroup PWM
+ * @{
+ */
+
+#include "hal.h"
+
+#if HAL_USE_PWM || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/**
+ * @brief PWMD1 driver identifier.
+ * @note The driver PWMD1 allocates the complex timer TIM1 when enabled.
+ */
+#if PLATFORM_PWM_USE_PWM1 || defined(__DOXYGEN__)
+PWMDriver PWMD1;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level PWM driver initialization.
+ *
+ * @notapi
+ */
+void pwm_lld_init(void) {
+
+#if PLATFORM_PWM_USE_PWM1
+ /* Driver initialization.*/
+ pwmObjectInit(&PWMD1);
+#endif
+}
+
+/**
+ * @brief Configures and activates the PWM peripheral.
+ * @note Starting a driver that is already in the @p PWM_READY state
+ * disables all the active channels.
+ *
+ * @param[in] pwmp pointer to a @p PWMDriver object
+ *
+ * @notapi
+ */
+void pwm_lld_start(PWMDriver *pwmp) {
+
+ if (pwmp->state == PWM_STOP) {
+ /* Clock activation and timer reset.*/
+#if PLATFORM_PWM_USE_PWM1
+ if (&PWMD1 == pwmp) {
+
+ }
+#endif
+ }
+}
+
+/**
+ * @brief Deactivates the PWM peripheral.
+ *
+ * @param[in] pwmp pointer to a @p PWMDriver object
+ *
+ * @notapi
+ */
+void pwm_lld_stop(PWMDriver *pwmp) {
+
+ /* If in ready state then disables the PWM clock.*/
+ if (pwmp->state == PWM_READY) {
+#if PLATFORM_PWM_USE_PWM1
+ if (&PWMD1 == pwmp) {
+
+ }
+#endif
+}
+
+/**
+ * @brief Enables a PWM channel.
+ * @pre The PWM unit must have been activated using @p pwmStart().
+ * @post The channel is active using the specified configuration.
+ * @note The function has effect at the next cycle start.
+ * @note Channel notification is not enabled.
+ *
+ * @param[in] pwmp pointer to a @p PWMDriver object
+ * @param[in] channel PWM channel identifier (0...channels-1)
+ * @param[in] width PWM pulse width as clock pulses number
+ *
+ * @notapi
+ */
+void pwm_lld_enable_channel(PWMDriver *pwmp,
+ pwmchannel_t channel,
+ pwmcnt_t width) {
+
+ (void)pwmp;
+}
+
+/**
+ * @brief Disables a PWM channel and its notification.
+ * @pre The PWM unit must have been activated using @p pwmStart().
+ * @post The channel is disabled and its output line returned to the
+ * idle state.
+ * @note The function has effect at the next cycle start.
+ *
+ * @param[in] pwmp pointer to a @p PWMDriver object
+ * @param[in] channel PWM channel identifier (0...channels-1)
+ *
+ * @notapi
+ */
+void pwm_lld_disable_channel(PWMDriver *pwmp, pwmchannel_t channel) {
+
+ (void)pwmp;
+}
+
+/**
+ * @brief Enables the periodic activation edge notification.
+ * @pre The PWM unit must have been activated using @p pwmStart().
+ * @note If the notification is already enabled then the call has no effect.
+ *
+ * @param[in] pwmp pointer to a @p PWMDriver object
+ *
+ * @notapi
+ */
+void pwm_lld_enable_periodic_notification(PWMDriver *pwmp) {
+
+ (void)pwmp;
+}
+
+/**
+ * @brief Disables the periodic activation edge notification.
+ * @pre The PWM unit must have been activated using @p pwmStart().
+ * @note If the notification is already disabled then the call has no effect.
+ *
+ * @param[in] pwmp pointer to a @p PWMDriver object
+ *
+ * @notapi
+ */
+void pwm_lld_disable_periodic_notification(PWMDriver *pwmp) {
+
+ (void)pwmp;
+}
+
+/**
+ * @brief Enables a channel de-activation edge notification.
+ * @pre The PWM unit must have been activated using @p pwmStart().
+ * @pre The channel must have been activated using @p pwmEnableChannel().
+ * @note If the notification is already enabled then the call has no effect.
+ *
+ * @param[in] pwmp pointer to a @p PWMDriver object
+ * @param[in] channel PWM channel identifier (0...channels-1)
+ *
+ * @notapi
+ */
+void pwm_lld_enable_channel_notification(PWMDriver *pwmp,
+ pwmchannel_t channel) {
+
+ (void)pwmp;
+ (void)channel;
+}
+
+/**
+ * @brief Disables a channel de-activation edge notification.
+ * @pre The PWM unit must have been activated using @p pwmStart().
+ * @pre The channel must have been activated using @p pwmEnableChannel().
+ * @note If the notification is already disabled then the call has no effect.
+ *
+ * @param[in] pwmp pointer to a @p PWMDriver object
+ * @param[in] channel PWM channel identifier (0...channels-1)
+ *
+ * @notapi
+ */
+void pwm_lld_disable_channel_notification(PWMDriver *pwmp,
+ pwmchannel_t channel) {
+
+ (void)pwmp;
+ (void)channel;
+}
+
+#endif /* HAL_USE_PWM */
+
+/** @} */
|