diff options
Diffstat (limited to 'os/hal/ports/STM32/can_lld.h')
-rw-r--r-- | os/hal/ports/STM32/can_lld.h | 366 |
1 files changed, 366 insertions, 0 deletions
diff --git a/os/hal/ports/STM32/can_lld.h b/os/hal/ports/STM32/can_lld.h new file mode 100644 index 000000000..9f3797029 --- /dev/null +++ b/os/hal/ports/STM32/can_lld.h @@ -0,0 +1,366 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/can_lld.h
+ * @brief STM32 CAN subsystem low level driver header.
+ *
+ * @addtogroup CAN
+ * @{
+ */
+
+#ifndef _CAN_LLD_H_
+#define _CAN_LLD_H_
+
+#if HAL_USE_CAN || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*
+ * The following macros from the ST header file are replaced with better
+ * equivalents.
+ */
+#undef CAN_BTR_BRP
+#undef CAN_BTR_TS1
+#undef CAN_BTR_TS2
+#undef CAN_BTR_SJW
+
+/**
+ * @brief This switch defines whether the driver implementation supports
+ * a low power switch mode with automatic an wakeup feature.
+ */
+#define CAN_SUPPORTS_SLEEP TRUE
+
+/**
+ * @brief This implementation supports three transmit mailboxes.
+ */
+#define CAN_TX_MAILBOXES 3
+
+/**
+ * @brief This implementation supports two receive mailboxes.
+ */
+#define CAN_RX_MAILBOXES 2
+
+/**
+ * @name CAN registers helper macros
+ * @{
+ */
+#define CAN_BTR_BRP(n) (n) /**< @brief BRP field macro.*/
+#define CAN_BTR_TS1(n) ((n) << 16) /**< @brief TS1 field macro.*/
+#define CAN_BTR_TS2(n) ((n) << 20) /**< @brief TS2 field macro.*/
+#define CAN_BTR_SJW(n) ((n) << 24) /**< @brief SJW field macro.*/
+
+#define CAN_IDE_STD 0 /**< @brief Standard id. */
+#define CAN_IDE_EXT 1 /**< @brief Extended id. */
+
+#define CAN_RTR_DATA 0 /**< @brief Data frame. */
+#define CAN_RTR_REMOTE 1 /**< @brief Remote frame. */
+/** @} */
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief CAN1 driver enable switch.
+ * @details If set to @p TRUE the support for CAN1 is included.
+ */
+#if !defined(STM32_CAN_USE_CAN1) || defined(__DOXYGEN__)
+#define STM32_CAN_USE_CAN1 FALSE
+#endif
+
+/**
+ * @brief CAN2 driver enable switch.
+ * @details If set to @p TRUE the support for CAN2 is included.
+ */
+#if !defined(STM32_CAN_USE_CAN2) || defined(__DOXYGEN__)
+#define STM32_CAN_USE_CAN2 FALSE
+#endif
+
+/**
+ * @brief CAN1 interrupt priority level setting.
+ */
+#if !defined(STM32_CAN_CAN1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_CAN_CAN1_IRQ_PRIORITY 11
+#endif
+/** @} */
+
+/**
+ * @brief CAN2 interrupt priority level setting.
+ */
+#if !defined(STM32_CAN_CAN2_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_CAN_CAN2_IRQ_PRIORITY 11
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if STM32_CAN_USE_CAN1 && !STM32_HAS_CAN1
+#error "CAN1 not present in the selected device"
+#endif
+
+#if STM32_CAN_USE_CAN2 && !STM32_HAS_CAN2
+#error "CAN2 not present in the selected device"
+#endif
+
+#if !STM32_CAN_USE_CAN1 && !STM32_CAN_USE_CAN2
+#error "CAN driver activated but no CAN peripheral assigned"
+#endif
+
+#if !STM32_CAN_USE_CAN1 && STM32_CAN_USE_CAN2
+#error "CAN2 requires CAN1, it cannot operate independently"
+#endif
+
+#if CAN_USE_SLEEP_MODE && !CAN_SUPPORTS_SLEEP
+#error "CAN sleep mode not supported in this architecture"
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief Type of a transmission mailbox index.
+ */
+typedef uint32_t canmbx_t;
+
+/**
+ * @brief CAN transmission frame.
+ * @note Accessing the frame data as word16 or word32 is not portable because
+ * machine data endianness, it can be still useful for a quick filling.
+ */
+typedef struct {
+ struct {
+ uint8_t DLC:4; /**< @brief Data length. */
+ uint8_t RTR:1; /**< @brief Frame type. */
+ uint8_t IDE:1; /**< @brief Identifier type. */
+ };
+ union {
+ struct {
+ uint32_t SID:11; /**< @brief Standard identifier.*/
+ };
+ struct {
+ uint32_t EID:29; /**< @brief Extended identifier.*/
+ };
+ };
+ union {
+ uint8_t data8[8]; /**< @brief Frame data. */
+ uint16_t data16[4]; /**< @brief Frame data. */
+ uint32_t data32[2]; /**< @brief Frame data. */
+ };
+} CANTxFrame;
+
+/**
+ * @brief CAN received frame.
+ * @note Accessing the frame data as word16 or word32 is not portable because
+ * machine data endianness, it can be still useful for a quick filling.
+ */
+typedef struct {
+ struct {
+ uint8_t FMI; /**< @brief Filter id. */
+ uint16_t TIME; /**< @brief Time stamp. */
+ };
+ struct {
+ uint8_t DLC:4; /**< @brief Data length. */
+ uint8_t RTR:1; /**< @brief Frame type. */
+ uint8_t IDE:1; /**< @brief Identifier type. */
+ };
+ union {
+ struct {
+ uint32_t SID:11; /**< @brief Standard identifier.*/
+ };
+ struct {
+ uint32_t EID:29; /**< @brief Extended identifier.*/
+ };
+ };
+ union {
+ uint8_t data8[8]; /**< @brief Frame data. */
+ uint16_t data16[4]; /**< @brief Frame data. */
+ uint32_t data32[2]; /**< @brief Frame data. */
+ };
+} CANRxFrame;
+
+/**
+ * @brief CAN filter.
+ * @note Refer to the STM32 reference manual for info about filters.
+ */
+typedef struct {
+ /**
+ * @brief Number of the filter to be programmed.
+ */
+ uint32_t filter;
+ /**
+ * @brief Filter mode.
+ * @note This bit represent the CAN_FM1R register bit associated to this
+ * filter (0=mask mode, 1=list mode).
+ */
+ uint32_t mode:1;
+ /**
+ * @brief Filter scale.
+ * @note This bit represent the CAN_FS1R register bit associated to this
+ * filter (0=16 bits mode, 1=32 bits mode).
+ */
+ uint32_t scale:1;
+ /**
+ * @brief Filter mode.
+ * @note This bit represent the CAN_FFA1R register bit associated to this
+ * filter, must be set to zero in this version of the driver.
+ */
+ uint32_t assignment:1;
+ /**
+ * @brief Filter register 1 (identifier).
+ */
+ uint32_t register1;
+ /**
+ * @brief Filter register 2 (mask/identifier depending on mode=0/1).
+ */
+ uint32_t register2;
+} CANFilter;
+
+/**
+ * @brief Driver configuration structure.
+ */
+typedef struct {
+ /**
+ * @brief CAN MCR register initialization data.
+ * @note Some bits in this register are enforced by the driver regardless
+ * their status in this field.
+ */
+ uint32_t mcr;
+ /**
+ * @brief CAN BTR register initialization data.
+ * @note Some bits in this register are enforced by the driver regardless
+ * their status in this field.
+ */
+ uint32_t btr;
+} CANConfig;
+
+/**
+ * @brief Structure representing an CAN driver.
+ */
+typedef struct {
+ /**
+ * @brief Driver state.
+ */
+ canstate_t state;
+ /**
+ * @brief Current configuration data.
+ */
+ const CANConfig *config;
+ /**
+ * @brief Transmission threads queue.
+ */
+ threads_queue_t txqueue;
+ /**
+ * @brief Receive threads queue.
+ */
+ threads_queue_t rxqueue;
+ /**
+ * @brief One or more frames become available.
+ * @note After broadcasting this event it will not be broadcasted again
+ * until the received frames queue has been completely emptied. It
+ * is <b>not</b> broadcasted for each received frame. It is
+ * responsibility of the application to empty the queue by
+ * repeatedly invoking @p chReceive() when listening to this event.
+ * This behavior minimizes the interrupt served by the system
+ * because CAN traffic.
+ * @note The flags associated to the listeners will indicate which
+ * receive mailboxes become non-empty.
+ */
+ event_source_t rxfull_event;
+ /**
+ * @brief One or more transmission mailbox become available.
+ * @note The flags associated to the listeners will indicate which
+ * transmit mailboxes become empty.
+ *
+ */
+ event_source_t txempty_event;
+ /**
+ * @brief A CAN bus error happened.
+ * @note The flags associated to the listeners will indicate the
+ * error(s) that have occurred.
+ */
+ event_source_t error_event;
+#if CAN_USE_SLEEP_MODE || defined (__DOXYGEN__)
+ /**
+ * @brief Entering sleep state event.
+ */
+ event_source_t sleep_event;
+ /**
+ * @brief Exiting sleep state event.
+ */
+ event_source_t wakeup_event;
+#endif /* CAN_USE_SLEEP_MODE */
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Pointer to the CAN registers.
+ */
+ CAN_TypeDef *can;
+} CANDriver;
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if STM32_CAN_USE_CAN1 && !defined(__DOXYGEN__)
+extern CANDriver CAND1;
+#endif
+
+#if STM32_CAN_USE_CAN2 && !defined(__DOXYGEN__)
+extern CANDriver CAND2;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void can_lld_init(void);
+ void can_lld_start(CANDriver *canp);
+ void can_lld_stop(CANDriver *canp);
+ bool_t can_lld_is_tx_empty(CANDriver *canp,
+ canmbx_t mailbox);
+ void can_lld_transmit(CANDriver *canp,
+ canmbx_t mailbox,
+ const CANTxFrame *crfp);
+ bool_t can_lld_is_rx_nonempty(CANDriver *canp,
+ canmbx_t mailbox);
+ void can_lld_receive(CANDriver *canp,
+ canmbx_t mailbox,
+ CANRxFrame *ctfp);
+#if CAN_USE_SLEEP_MODE
+ void can_lld_sleep(CANDriver *canp);
+ void can_lld_wakeup(CANDriver *canp);
+#endif /* CAN_USE_SLEEP_MODE */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_CAN */
+
+#endif /* _CAN_LLD_H_ */
+
+/** @} */
|