diff options
Diffstat (limited to 'os/hal/ports/STM32/STM32F4xx/stm32_rcc.h')
-rw-r--r-- | os/hal/ports/STM32/STM32F4xx/stm32_rcc.h | 1382 |
1 files changed, 1382 insertions, 0 deletions
diff --git a/os/hal/ports/STM32/STM32F4xx/stm32_rcc.h b/os/hal/ports/STM32/STM32F4xx/stm32_rcc.h new file mode 100644 index 000000000..9178f67da --- /dev/null +++ b/os/hal/ports/STM32/STM32F4xx/stm32_rcc.h @@ -0,0 +1,1382 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32F4xx/stm32_rcc.h
+ * @brief RCC helper driver header.
+ * @note This file requires definitions from the ST header file
+ * @p stm32f4xx.h.
+ *
+ * @addtogroup STM32F4xx_RCC
+ * @{
+ */
+#ifndef _STM32_RCC_
+#define _STM32_RCC_
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/**
+ * @name Generic RCC operations
+ * @{
+ */
+/**
+ * @brief Enables the clock of one or more peripheral on the APB1 bus.
+ *
+ * @param[in] mask APB1 peripherals mask
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableAPB1(mask, lp) { \
+ RCC->APB1ENR |= (mask); \
+ if (lp) \
+ RCC->APB1LPENR |= (mask); \
+}
+
+/**
+ * @brief Disables the clock of one or more peripheral on the APB1 bus.
+ *
+ * @param[in] mask APB1 peripherals mask
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableAPB1(mask, lp) { \
+ RCC->APB1ENR &= ~(mask); \
+ if (lp) \
+ RCC->APB1LPENR &= ~(mask); \
+}
+
+/**
+ * @brief Resets one or more peripheral on the APB1 bus.
+ *
+ * @param[in] mask APB1 peripherals mask
+ *
+ * @api
+ */
+#define rccResetAPB1(mask) { \
+ RCC->APB1RSTR |= (mask); \
+ RCC->APB1RSTR = 0; \
+}
+
+/**
+ * @brief Enables the clock of one or more peripheral on the APB2 bus.
+ *
+ * @param[in] mask APB2 peripherals mask
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableAPB2(mask, lp) { \
+ RCC->APB2ENR |= (mask); \
+ if (lp) \
+ RCC->APB2LPENR |= (mask); \
+}
+
+/**
+ * @brief Disables the clock of one or more peripheral on the APB2 bus.
+ *
+ * @param[in] mask APB2 peripherals mask
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableAPB2(mask, lp) { \
+ RCC->APB2ENR &= ~(mask); \
+ if (lp) \
+ RCC->APB2LPENR &= ~(mask); \
+}
+
+/**
+ * @brief Resets one or more peripheral on the APB2 bus.
+ *
+ * @param[in] mask APB2 peripherals mask
+ *
+ * @api
+ */
+#define rccResetAPB2(mask) { \
+ RCC->APB2RSTR |= (mask); \
+ RCC->APB2RSTR = 0; \
+}
+
+/**
+ * @brief Enables the clock of one or more peripheral on the AHB1 bus.
+ *
+ * @param[in] mask AHB1 peripherals mask
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableAHB1(mask, lp) { \
+ RCC->AHB1ENR |= (mask); \
+ if (lp) \
+ RCC->AHB1LPENR |= (mask); \
+}
+
+/**
+ * @brief Disables the clock of one or more peripheral on the AHB1 bus.
+ *
+ * @param[in] mask AHB1 peripherals mask
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableAHB1(mask, lp) { \
+ RCC->AHB1ENR &= ~(mask); \
+ if (lp) \
+ RCC->AHB1LPENR &= ~(mask); \
+}
+
+/**
+ * @brief Resets one or more peripheral on the AHB1 bus.
+ *
+ * @param[in] mask AHB1 peripherals mask
+ *
+ * @api
+ */
+#define rccResetAHB1(mask) { \
+ RCC->AHB1RSTR |= (mask); \
+ RCC->AHB1RSTR = 0; \
+}
+
+/**
+ * @brief Enables the clock of one or more peripheral on the AHB2 bus.
+ *
+ * @param[in] mask AHB2 peripherals mask
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableAHB2(mask, lp) { \
+ RCC->AHB2ENR |= (mask); \
+ if (lp) \
+ RCC->AHB2LPENR |= (mask); \
+}
+
+/**
+ * @brief Disables the clock of one or more peripheral on the AHB2 bus.
+ *
+ * @param[in] mask AHB2 peripherals mask
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableAHB2(mask, lp) { \
+ RCC->AHB2ENR &= ~(mask); \
+ if (lp) \
+ RCC->AHB2LPENR &= ~(mask); \
+}
+
+/**
+ * @brief Resets one or more peripheral on the AHB2 bus.
+ *
+ * @param[in] mask AHB2 peripherals mask
+ *
+ * @api
+ */
+#define rccResetAHB2(mask) { \
+ RCC->AHB2RSTR |= (mask); \
+ RCC->AHB2RSTR = 0; \
+}
+
+/**
+ * @brief Enables the clock of one or more peripheral on the AHB3 (FSMC) bus.
+ *
+ * @param[in] mask AHB3 peripherals mask
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableAHB3(mask, lp) { \
+ RCC->AHB3ENR |= (mask); \
+ if (lp) \
+ RCC->AHB3LPENR |= (mask); \
+}
+
+/**
+ * @brief Disables the clock of one or more peripheral on the AHB3 (FSMC) bus.
+ *
+ * @param[in] mask AHB3 peripherals mask
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableAHB3(mask, lp) { \
+ RCC->AHB3ENR &= ~(mask); \
+ if (lp) \
+ RCC->AHB3LPENR &= ~(mask); \
+}
+
+/**
+ * @brief Resets one or more peripheral on the AHB3 (FSMC) bus.
+ *
+ * @param[in] mask AHB3 peripherals mask
+ *
+ * @api
+ */
+#define rccResetAHB3(mask) { \
+ RCC->AHB3RSTR |= (mask); \
+ RCC->AHB3RSTR = 0; \
+}
+/** @} */
+
+/**
+ * @name ADC peripherals specific RCC operations
+ * @{
+ */
+/**
+ * @brief Enables the ADC1 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableADC1(lp) rccEnableAPB2(RCC_APB2ENR_ADC1EN, lp)
+
+/**
+ * @brief Disables the ADC1 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableADC1(lp) rccDisableAPB2(RCC_APB2ENR_ADC1EN, lp)
+
+/**
+ * @brief Resets the ADC1 peripheral.
+ *
+ * @api
+ */
+#define rccResetADC1() rccResetAPB2(RCC_APB2RSTR_ADC1RST)
+
+/**
+ * @brief Enables the ADC2 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableADC2(lp) rccEnableAPB2(RCC_APB2ENR_ADC2EN, lp)
+
+/**
+ * @brief Disables the ADC2 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableADC2(lp) rccDisableAPB2(RCC_APB2ENR_ADC2EN, lp)
+
+/**
+ * @brief Resets the ADC2 peripheral.
+ *
+ * @api
+ */
+#define rccResetADC2() rccResetAPB2(RCC_APB2RSTR_ADC2RST)
+
+/**
+ * @brief Enables the ADC3 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableADC3(lp) rccEnableAPB2(RCC_APB2ENR_ADC3EN, lp)
+
+/**
+ * @brief Disables the ADC3 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableADC3(lp) rccDisableAPB2(RCC_APB2ENR_ADC3EN, lp)
+
+/**
+ * @brief Resets the ADC3 peripheral.
+ *
+ * @api
+ */
+#define rccResetADC3() rccResetAPB2(RCC_APB2RSTR_ADC3RST)
+/** @} */
+
+/**
+ * @name DMA peripheral specific RCC operations
+ * @{
+ */
+/**
+ * @brief Enables the DMA1 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableDMA1(lp) rccEnableAHB1(RCC_AHB1ENR_DMA1EN, lp)
+
+/**
+ * @brief Disables the DMA1 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableDMA1(lp) rccDisableAHB1(RCC_AHB1ENR_DMA1EN, lp)
+
+/**
+ * @brief Resets the DMA1 peripheral.
+ *
+ * @api
+ */
+#define rccResetDMA1() rccResetAHB1(RCC_AHB1RSTR_DMA1RST)
+
+/**
+ * @brief Enables the DMA2 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableDMA2(lp) rccEnableAHB1(RCC_AHB1ENR_DMA2EN, lp)
+
+/**
+ * @brief Disables the DMA2 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableDMA2(lp) rccDisableAHB1(RCC_AHB1ENR_DMA2EN, lp)
+
+/**
+ * @brief Resets the DMA2 peripheral.
+ *
+ * @api
+ */
+#define rccResetDMA2() rccResetAHB1(RCC_AHB1RSTR_DMA2RST)
+/** @} */
+
+/**
+ * @name BKPSRAM specific RCC operations
+ * @{
+ */
+/**
+ * @brief Enables the BKPSRAM peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableBKPSRAM(lp) rccEnableAHB1(RCC_AHB1ENR_BKPSRAMEN, lp)
+
+/**
+ * @brief Disables the BKPSRAM peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableBKPSRAM(lp) rccDisableAHB1(RCC_AHB1ENR_BKPSRAMEN, lp)
+/** @} */
+
+/**
+ * @name PWR interface specific RCC operations
+ * @{
+ */
+/**
+ * @brief Enables the PWR interface clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnablePWRInterface(lp) rccEnableAPB1(RCC_APB1ENR_PWREN, lp)
+
+/**
+ * @brief Disables PWR interface clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisablePWRInterface(lp) rccDisableAPB1(RCC_APB1ENR_PWREN, lp)
+
+/**
+ * @brief Resets the PWR interface.
+ *
+ * @api
+ */
+#define rccResetPWRInterface() rccResetAPB1(RCC_APB1RSTR_PWRRST)
+/** @} */
+
+
+/**
+ * @name CAN peripherals specific RCC operations
+ * @{
+ */
+/**
+ * @brief Enables the CAN1 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableCAN1(lp) rccEnableAPB1(RCC_APB1ENR_CAN1EN, lp)
+
+/**
+ * @brief Disables the CAN1 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableCAN1(lp) rccDisableAPB1(RCC_APB1ENR_CAN1EN, lp)
+
+/**
+ * @brief Resets the CAN1 peripheral.
+ *
+ * @api
+ */
+#define rccResetCAN1() rccResetAPB1(RCC_APB1RSTR_CAN1RST)
+
+/**
+ * @brief Enables the CAN2 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableCAN2(lp) rccEnableAPB1(RCC_APB1ENR_CAN2EN, lp)
+
+/**
+ * @brief Disables the CAN2 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableCAN2(lp) rccDisableAPB1(RCC_APB1ENR_CAN2EN, lp)
+
+/**
+ * @brief Resets the CAN2 peripheral.
+ *
+ * @api
+ */
+#define rccResetCAN2() rccResetAPB1(RCC_APB1RSTR_CAN2RST)
+/** @} */
+
+/**
+ * @name ETH peripheral specific RCC operations
+ * @{
+ */
+/**
+ * @brief Enables the ETH peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableETH(lp) rccEnableAHB1(RCC_AHB1ENR_ETHMACEN | \
+ RCC_AHB1ENR_ETHMACTXEN | \
+ RCC_AHB1ENR_ETHMACRXEN, lp)
+
+/**
+ * @brief Disables the ETH peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableETH(lp) rccDisableAHB1(RCC_AHB1ENR_ETHMACEN | \
+ RCC_AHB1ENR_ETHMACTXEN | \
+ RCC_AHB1ENR_ETHMACRXEN, lp)
+
+/**
+ * @brief Resets the ETH peripheral.
+ *
+ * @api
+ */
+#define rccResetETH() rccResetAHB1(RCC_AHB1RSTR_ETHMACRST)
+/** @} */
+
+/**
+ * @name I2C peripherals specific RCC operations
+ * @{
+ */
+/**
+ * @brief Enables the I2C1 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableI2C1(lp) rccEnableAPB1(RCC_APB1ENR_I2C1EN, lp)
+
+/**
+ * @brief Disables the I2C1 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableI2C1(lp) rccDisableAPB1(RCC_APB1ENR_I2C1EN, lp)
+
+/**
+ * @brief Resets the I2C1 peripheral.
+ *
+ * @api
+ */
+#define rccResetI2C1() rccResetAPB1(RCC_APB1RSTR_I2C1RST)
+
+/**
+ * @brief Enables the I2C2 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableI2C2(lp) rccEnableAPB1(RCC_APB1ENR_I2C2EN, lp)
+
+/**
+ * @brief Disables the I2C2 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableI2C2(lp) rccDisableAPB1(RCC_APB1ENR_I2C2EN, lp)
+
+/**
+ * @brief Resets the I2C2 peripheral.
+ *
+ * @api
+ */
+#define rccResetI2C2() rccResetAPB1(RCC_APB1RSTR_I2C2RST)
+
+/**
+ * @brief Enables the I2C3 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableI2C3(lp) rccEnableAPB1(RCC_APB1ENR_I2C3EN, lp)
+
+/**
+ * @brief Disables the I2C3 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableI2C3(lp) rccDisableAPB1(RCC_APB1ENR_I2C3EN, lp)
+
+/**
+ * @brief Resets the I2C3 peripheral.
+ *
+ * @api
+ */
+#define rccResetI2C3() rccResetAPB1(RCC_APB1RSTR_I2C3RST)
+/** @} */
+
+/**
+ * @name OTG peripherals specific RCC operations
+ * @{
+ */
+/**
+ * @brief Enables the OTG_FS peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableOTG_FS(lp) rccEnableAHB2(RCC_AHB2ENR_OTGFSEN, lp)
+
+/**
+ * @brief Disables the OTG_FS peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableOTG_FS(lp) rccDisableAHB2(RCC_AHB2ENR_OTGFSEN, lp)
+
+/**
+ * @brief Resets the OTG_FS peripheral.
+ *
+ * @api
+ */
+#define rccResetOTG_FS() rccResetAHB2(RCC_AHB2RSTR_OTGFSRST)
+
+/**
+ * @brief Enables the OTG_HS peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableOTG_HS(lp) rccEnableAHB1(RCC_AHB1ENR_OTGHSEN, lp)
+
+/**
+ * @brief Disables the OTG_HS peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableOTG_HS(lp) rccDisableAHB1(RCC_AHB1ENR_OTGHSEN, lp)
+
+/**
+ * @brief Resets the OTG_HS peripheral.
+ *
+ * @api
+ */
+#define rccResetOTG_HS() rccResetAHB1(RCC_AHB1RSTR_OTGHSRST)
+/** @} */
+
+/**
+ * @name SDIO peripheral specific RCC operations
+ * @{
+ */
+/**
+ * @brief Enables the SDIO peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableSDIO(lp) rccEnableAPB2(RCC_APB2ENR_SDIOEN, lp)
+
+/**
+ * @brief Disables the SDIO peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableSDIO(lp) rccDisableAPB2(RCC_APB2ENR_SDIOEN, lp)
+
+/**
+ * @brief Resets the SDIO peripheral.
+ * @note Not supported in this family, does nothing.
+ *
+ * @api
+ */
+#define rccResetSDIO() rccResetAPB2(RCC_APB2RSTR_SDIORST)
+/** @} */
+
+/**
+ * @name SPI peripherals specific RCC operations
+ * @{
+ */
+/**
+ * @brief Enables the SPI1 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableSPI1(lp) rccEnableAPB2(RCC_APB2ENR_SPI1EN, lp)
+
+/**
+ * @brief Disables the SPI1 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableSPI1(lp) rccDisableAPB2(RCC_APB2ENR_SPI1EN, lp)
+
+/**
+ * @brief Resets the SPI1 peripheral.
+ *
+ * @api
+ */
+#define rccResetSPI1() rccResetAPB2(RCC_APB2RSTR_SPI1RST)
+
+/**
+ * @brief Enables the SPI2 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableSPI2(lp) rccEnableAPB1(RCC_APB1ENR_SPI2EN, lp)
+
+/**
+ * @brief Disables the SPI2 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableSPI2(lp) rccDisableAPB1(RCC_APB1ENR_SPI2EN, lp)
+
+/**
+ * @brief Resets the SPI2 peripheral.
+ *
+ * @api
+ */
+#define rccResetSPI2() rccResetAPB1(RCC_APB1RSTR_SPI2RST)
+
+/**
+ * @brief Enables the SPI3 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableSPI3(lp) rccEnableAPB1(RCC_APB1ENR_SPI3EN, lp)
+
+/**
+ * @brief Disables the SPI3 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableSPI3(lp) rccDisableAPB1(RCC_APB1ENR_SPI3EN, lp)
+
+/**
+ * @brief Resets the SPI3 peripheral.
+ *
+ * @api
+ */
+#define rccResetSPI3() rccResetAPB1(RCC_APB1RSTR_SPI3RST)
+
+/**
+ * @brief Enables the SPI4 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableSPI4(lp) rccEnableAPB2(RCC_APB2ENR_SPI4EN, lp)
+
+/**
+ * @brief Disables the SPI4 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableSPI4(lp) rccDisableAPB2(RCC_APB2ENR_SPI4EN, lp)
+
+/**
+ * @brief Resets the SPI4 peripheral.
+ *
+ * @api
+ */
+#define rccResetSPI4() rccResetAPB2(RCC_APB2RSTR_SPI4RST)
+
+/**
+ * @brief Enables the SPI5 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableSPI5(lp) rccEnableAPB2(RCC_APB2ENR_SPI5EN, lp)
+
+/**
+ * @brief Disables the SPI5 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableSPI5(lp) rccDisableAPB2(RCC_APB2ENR_SPI5EN, lp)
+
+/**
+ * @brief Resets the SPI5 peripheral.
+ *
+ * @api
+ */
+#define rccResetSPI5() rccResetAPB2(RCC_APB2RSTR_SPI5RST)
+
+/**
+ * @brief Enables the SPI6 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableSPI6(lp) rccEnableAPB2(RCC_APB2ENR_SPI6EN, lp)
+
+/**
+ * @brief Disables the SPI6 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableSPI6(lp) rccDisableAPB2(RCC_APB2ENR_SPI6EN, lp)
+
+/**
+ * @brief Resets the SPI6 peripheral.
+ *
+ * @api
+ */
+#define rccResetSPI6() rccResetAPB2(RCC_APB2RSTR_SPI6RST)
+/** @} */
+
+/**
+ * @name TIM peripherals specific RCC operations
+ * @{
+ */
+/**
+ * @brief Enables the TIM1 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableTIM1(lp) rccEnableAPB2(RCC_APB2ENR_TIM1EN, lp)
+
+/**
+ * @brief Disables the TIM1 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableTIM1(lp) rccDisableAPB2(RCC_APB2ENR_TIM1EN, lp)
+
+/**
+ * @brief Resets the TIM1 peripheral.
+ *
+ * @api
+ */
+#define rccResetTIM1() rccResetAPB2(RCC_APB2RSTR_TIM1RST)
+
+/**
+ * @brief Enables the TIM2 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableTIM2(lp) rccEnableAPB1(RCC_APB1ENR_TIM2EN, lp)
+
+/**
+ * @brief Disables the TIM2 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableTIM2(lp) rccDisableAPB1(RCC_APB1ENR_TIM2EN, lp)
+
+/**
+ * @brief Resets the TIM2 peripheral.
+ *
+ * @api
+ */
+#define rccResetTIM2() rccResetAPB1(RCC_APB1RSTR_TIM2RST)
+
+/**
+ * @brief Enables the TIM3 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableTIM3(lp) rccEnableAPB1(RCC_APB1ENR_TIM3EN, lp)
+
+/**
+ * @brief Disables the TIM3 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableTIM3(lp) rccDisableAPB1(RCC_APB1ENR_TIM3EN, lp)
+
+/**
+ * @brief Resets the TIM3 peripheral.
+ *
+ * @api
+ */
+#define rccResetTIM3() rccResetAPB1(RCC_APB1RSTR_TIM3RST)
+
+/**
+ * @brief Enables the TIM4 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableTIM4(lp) rccEnableAPB1(RCC_APB1ENR_TIM4EN, lp)
+
+/**
+ * @brief Disables the TIM4 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableTIM4(lp) rccDisableAPB1(RCC_APB1ENR_TIM4EN, lp)
+
+/**
+ * @brief Resets the TIM4 peripheral.
+ *
+ * @api
+ */
+#define rccResetTIM4() rccResetAPB1(RCC_APB1RSTR_TIM4RST)
+
+/**
+ * @brief Enables the TIM5 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableTIM5(lp) rccEnableAPB1(RCC_APB1ENR_TIM5EN, lp)
+
+/**
+ * @brief Disables the TIM5 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableTIM5(lp) rccDisableAPB1(RCC_APB1ENR_TIM5EN, lp)
+
+/**
+ * @brief Resets the TIM5 peripheral.
+ *
+ * @api
+ */
+#define rccResetTIM5() rccResetAPB1(RCC_APB1RSTR_TIM5RST)
+
+/**
+ * @brief Enables the TIM6 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableTIM6(lp) rccEnableAPB1(RCC_APB1ENR_TIM6EN, lp)
+
+/**
+ * @brief Disables the TIM6 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableTIM6(lp) rccDisableAPB1(RCC_APB1ENR_TIM6EN, lp)
+
+/**
+ * @brief Resets the TIM6 peripheral.
+ *
+ * @api
+ */
+#define rccResetTIM6() rccResetAPB1(RCC_APB1RSTR_TIM6RST)
+
+/**
+ * @brief Enables the TIM7 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableTIM7(lp) rccEnableAPB1(RCC_APB1ENR_TIM7EN, lp)
+
+/**
+ * @brief Disables the TIM7 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableTIM7(lp) rccDisableAPB1(RCC_APB1ENR_TIM7EN, lp)
+
+/**
+ * @brief Resets the TIM7 peripheral.
+ *
+ * @api
+ */
+#define rccResetTIM7() rccResetAPB1(RCC_APB1RSTR_TIM7RST)
+
+/**
+ * @brief Enables the TIM8 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableTIM8(lp) rccEnableAPB2(RCC_APB2ENR_TIM8EN, lp)
+
+/**
+ * @brief Disables the TIM8 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableTIM8(lp) rccDisableAPB2(RCC_APB2ENR_TIM8EN, lp)
+
+/**
+ * @brief Resets the TIM8 peripheral.
+ *
+ * @api
+ */
+#define rccResetTIM8() rccResetAPB2(RCC_APB2RSTR_TIM8RST)
+
+/**
+ * @brief Enables the TIM9peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableTIM9(lp) rccEnableAPB2(RCC_APB2ENR_TIM9EN, lp)
+
+/**
+ * @brief Disables the TIM9 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableTIM9(lp) rccDisableAPB2(RCC_APB2ENR_TIM9EN, lp)
+
+/**
+ * @brief Resets the TIM9 peripheral.
+ *
+ * @api
+ */
+#define rccResetTIM9() rccResetAPB2(RCC_APB2RSTR_TIM9RST)
+
+/**
+ * @brief Enables the TIM11 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableTIM11(lp) rccEnableAPB2(RCC_APB2ENR_TIM11EN, lp)
+
+/**
+ * @brief Disables the TIM11 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableTIM11(lp) rccDisableAPB2(RCC_APB2ENR_TIM11EN, lp)
+
+/**
+ * @brief Resets the TIM11 peripheral.
+ *
+ * @api
+ */
+#define rccResetTIM11() rccResetAPB2(RCC_APB2RSTR_TIM11RST)
+
+/**
+ * @brief Enables the TIM12 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableTIM12(lp) rccEnableAPB1(RCC_APB1ENR_TIM12EN, lp)
+
+/**
+ * @brief Disables the TIM12 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableTIM12(lp) rccDisableAPB1(RCC_APB1ENR_TIM12EN, lp)
+
+/**
+ * @brief Resets the TIM12 peripheral.
+ *
+ * @api
+ */
+#define rccResetTIM12() rccResetAPB1(RCC_APB1RSTR_TIM12RST)
+
+/**
+ * @brief Enables the TIM14 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableTIM14(lp) rccEnableAPB1(RCC_APB1ENR_TIM14EN, lp)
+
+/**
+ * @brief Disables the TIM14 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableTIM14(lp) rccDisableAPB1(RCC_APB1ENR_TIM14EN, lp)
+
+/**
+ * @brief Resets the TIM14 peripheral.
+ *
+ * @api
+ */
+#define rccResetTIM14() rccResetAPB1(RCC_APB1RSTR_TIM14RST)
+/** @} */
+
+/**
+ * @name USART/UART peripherals specific RCC operations
+ * @{
+ */
+/**
+ * @brief Enables the USART1 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableUSART1(lp) rccEnableAPB2(RCC_APB2ENR_USART1EN, lp)
+
+/**
+ * @brief Disables the USART1 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableUSART1(lp) rccDisableAPB2(RCC_APB2ENR_USART1EN, lp)
+
+/**
+ * @brief Resets the USART1 peripheral.
+ *
+ * @api
+ */
+#define rccResetUSART1() rccResetAPB2(RCC_APB2RSTR_USART1RST)
+
+/**
+ * @brief Enables the USART2 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableUSART2(lp) rccEnableAPB1(RCC_APB1ENR_USART2EN, lp)
+
+/**
+ * @brief Disables the USART2 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableUSART2(lp) rccDisableAPB1(RCC_APB1ENR_USART2EN, lp)
+
+/**
+ * @brief Resets the USART2 peripheral.
+ *
+ * @api
+ */
+#define rccResetUSART2() rccResetAPB1(RCC_APB1RSTR_USART2RST)
+
+/**
+ * @brief Enables the USART3 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableUSART3(lp) rccEnableAPB1(RCC_APB1ENR_USART3EN, lp)
+
+/**
+ * @brief Disables the USART3 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableUSART3(lp) rccDisableAPB1(RCC_APB1ENR_USART3EN, lp)
+
+/**
+ * @brief Resets the USART3 peripheral.
+ *
+ * @api
+ */
+#define rccResetUSART3() rccResetAPB1(RCC_APB1RSTR_USART3RST)
+
+/**
+ * @brief Enables the USART6 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableUSART6(lp) rccEnableAPB2(RCC_APB2ENR_USART6EN, lp)
+
+/**
+ * @brief Disables the USART6 peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableUSART6(lp) rccDisableAPB2(RCC_APB2ENR_USART6EN, lp)
+
+/**
+ * @brief Enables the UART4 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableUART4(lp) rccEnableAPB1(RCC_APB1ENR_UART4EN, lp)
+
+/**
+ * @brief Disables the UART4 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableUART4(lp) rccDisableAPB1(RCC_APB1ENR_UART4EN, lp)
+
+/**
+ * @brief Resets the UART4 peripheral.
+ *
+ * @api
+ */
+#define rccResetUART4() rccResetAPB1(RCC_APB1RSTR_UART4RST)
+
+/**
+ * @brief Enables the UART5 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableUART5(lp) rccEnableAPB1(RCC_APB1ENR_UART5EN, lp)
+
+/**
+ * @brief Disables the UART5 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableUART5(lp) rccDisableAPB1(RCC_APB1ENR_UART5EN, lp)
+
+/**
+ * @brief Resets the UART5 peripheral.
+ *
+ * @api
+ */
+#define rccResetUART5() rccResetAPB1(RCC_APB1RSTR_UART5RST)
+
+/**
+ * @brief Resets the USART6 peripheral.
+ *
+ * @api
+ */
+#define rccResetUSART6() rccResetAPB2(RCC_APB2RSTR_USART6RST)
+/** @} */
+
+/**
+ * @name LTDC peripheral specific RCC operations
+ * @{
+ */
+/**
+ * @brief Enables the LTDC peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableLTDC(lp) rccEnableAPB2(RCC_APB2ENR_LTDCEN, lp)
+
+/**
+ * @brief Disables the LTDC peripheral clock.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableLTDC(lp) rccDisableAPB2(RCC_APB2ENR_LTDCEN, lp)
+
+/**
+ * @brief Resets the LTDC peripheral.
+ *
+ * @api
+ */
+#define rccResetLTDC() rccResetAPB2(RCC_APB2RSTR_LTDCRST)
+/** @} */
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _STM32_RCC_ */
+
+/** @} */
|