diff options
Diffstat (limited to 'os/hal/ports/STM32/STM32F0xx')
| -rw-r--r-- | os/hal/ports/STM32/STM32F0xx/adc_lld.c | 296 | ||||
| -rw-r--r-- | os/hal/ports/STM32/STM32F0xx/adc_lld.h | 329 | ||||
| -rw-r--r-- | os/hal/ports/STM32/STM32F0xx/ext_lld_isr.c | 197 | ||||
| -rw-r--r-- | os/hal/ports/STM32/STM32F0xx/ext_lld_isr.h | 107 | ||||
| -rw-r--r-- | os/hal/ports/STM32/STM32F0xx/hal_lld.c | 199 | ||||
| -rw-r--r-- | os/hal/ports/STM32/STM32F0xx/hal_lld.h | 791 | ||||
| -rw-r--r-- | os/hal/ports/STM32/STM32F0xx/platform.mk | 28 | ||||
| -rw-r--r-- | os/hal/ports/STM32/STM32F0xx/stm32_dma.c | 291 | ||||
| -rw-r--r-- | os/hal/ports/STM32/STM32F0xx/stm32_dma.h | 394 | ||||
| -rw-r--r-- | os/hal/ports/STM32/STM32F0xx/stm32_isr.h | 91 | ||||
| -rw-r--r-- | os/hal/ports/STM32/STM32F0xx/stm32_rcc.h | 596 | ||||
| -rw-r--r-- | os/hal/ports/STM32/STM32F0xx/stm32_registry.h | 426 |
12 files changed, 3745 insertions, 0 deletions
diff --git a/os/hal/ports/STM32/STM32F0xx/adc_lld.c b/os/hal/ports/STM32/STM32F0xx/adc_lld.c new file mode 100644 index 000000000..9e95c0007 --- /dev/null +++ b/os/hal/ports/STM32/STM32F0xx/adc_lld.c @@ -0,0 +1,296 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32F0xx/adc_lld.c
+ * @brief STM32F0xx ADC subsystem low level driver source.
+ *
+ * @addtogroup ADC
+ * @{
+ */
+
+#include "hal.h"
+
+#if HAL_USE_ADC || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/** @brief ADC1 driver identifier.*/
+#if STM32_ADC_USE_ADC1 || defined(__DOXYGEN__)
+ADCDriver ADCD1;
+#endif
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Stops an ongoing conversion, if any.
+ *
+ * @param[in] adc pointer to the ADC registers block
+ */
+static void adc_lld_stop_adc(ADC_TypeDef *adc) {
+
+ if (adc->CR & ADC_CR_ADSTART) {
+ adc->CR |= ADC_CR_ADSTP;
+ while (adc->CR & ADC_CR_ADSTP)
+ ;
+ }
+}
+
+/**
+ * @brief ADC DMA ISR service routine.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ * @param[in] flags pre-shifted content of the ISR register
+ */
+static void adc_lld_serve_rx_interrupt(ADCDriver *adcp, uint32_t flags) {
+
+ /* DMA errors handling.*/
+ if ((flags & (STM32_DMA_ISR_TEIF | STM32_DMA_ISR_DMEIF)) != 0) {
+ /* DMA, this could help only if the DMA tries to access an unmapped
+ address space or violates alignment rules.*/
+ _adc_isr_error_code(adcp, ADC_ERR_DMAFAILURE);
+ }
+ else {
+ /* It is possible that the conversion group has already be reset by the
+ ADC error handler, in this case this interrupt is spurious.*/
+ if (adcp->grpp != NULL) {
+ if ((flags & STM32_DMA_ISR_TCIF) != 0) {
+ /* Transfer complete processing.*/
+ _adc_isr_full_code(adcp);
+ }
+ else if ((flags & STM32_DMA_ISR_HTIF) != 0) {
+ /* Half transfer processing.*/
+ _adc_isr_half_code(adcp);
+ }
+ }
+ }
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+#if STM32_ADC_USE_ADC1 || defined(__DOXYGEN__)
+/**
+ * @brief ADC interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(Vector70) {
+ uint32_t isr;
+
+ OSAL_IRQ_PROLOGUE();
+
+ isr = ADC1->ISR;
+ ADC1->ISR = isr;
+
+ /* It could be a spurious interrupt caused by overflows after DMA disabling,
+ just ignore it in this case.*/
+ if (ADCD1.grpp != NULL) {
+ /* Note, an overflow may occur after the conversion ended before the driver
+ is able to stop the ADC, this is why the DMA channel is checked too.*/
+ if ((isr & ADC_ISR_OVR) &&
+ (dmaStreamGetTransactionSize(ADCD1.dmastp) > 0)) {
+ /* ADC overflow condition, this could happen only if the DMA is unable
+ to read data fast enough.*/
+ _adc_isr_error_code(&ADCD1, ADC_ERR_OVERFLOW);
+ }
+ if (isr & ADC_ISR_AWD) {
+ /* Analog watchdog error.*/
+ _adc_isr_error_code(&ADCD1, ADC_ERR_AWD);
+ }
+ }
+
+ OSAL_IRQ_EPILOGUE();
+}
+#endif
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level ADC driver initialization.
+ *
+ * @notapi
+ */
+void adc_lld_init(void) {
+
+#if STM32_ADC_USE_ADC1
+ /* Driver initialization.*/
+ adcObjectInit(&ADCD1);
+ ADCD1.adc = ADC1;
+ ADCD1.dmastp = STM32_DMA1_STREAM1;
+ ADCD1.dmamode = STM32_DMA_CR_PL(STM32_ADC_ADC1_DMA_PRIORITY) |
+ STM32_DMA_CR_DIR_P2M |
+ STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_PSIZE_HWORD |
+ STM32_DMA_CR_MINC | STM32_DMA_CR_TCIE |
+ STM32_DMA_CR_DMEIE | STM32_DMA_CR_TEIE;
+#endif
+
+ /* The shared vector is initialized on driver initialization and never
+ disabled.*/
+ nvicEnableVector(12, STM32_ADC_IRQ_PRIORITY);
+
+ /* Calibration procedure.*/
+ rccEnableADC1(FALSE);
+ osalDbgAssert(ADC1->CR == 0, "invalid register state");
+ ADC1->CR |= ADC_CR_ADCAL;
+ while (ADC1->CR & ADC_CR_ADCAL)
+ ;
+ rccDisableADC1(FALSE);
+}
+
+/**
+ * @brief Configures and activates the ADC peripheral.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ *
+ * @notapi
+ */
+void adc_lld_start(ADCDriver *adcp) {
+
+ /* If in stopped state then enables the ADC and DMA clocks.*/
+ if (adcp->state == ADC_STOP) {
+#if STM32_ADC_USE_ADC1
+ if (&ADCD1 == adcp) {
+ bool b;
+ b = dmaStreamAllocate(adcp->dmastp,
+ STM32_ADC_ADC1_DMA_IRQ_PRIORITY,
+ (stm32_dmaisr_t)adc_lld_serve_rx_interrupt,
+ (void *)adcp);
+ osalDbgAssert(!b, "stream already allocated");
+ dmaStreamSetPeripheral(adcp->dmastp, &ADC1->DR);
+ rccEnableADC1(FALSE);
+#if STM32_ADCSW == STM32_ADCSW_HSI14
+ /* Clock from HSI14, no need for jitter removal.*/
+ ADC1->CFGR2 = 0x00001000;
+#else
+#if STM32_ADCPRE == STM32_ADCPRE_DIV2
+ ADC1->CFGR2 = 0x00001000 | ADC_CFGR2_JITOFFDIV2;
+#else
+ ADC1->CFGR2 = 0x00001000 | ADC_CFGR2_JITOFFDIV4;
+#endif
+#endif
+ }
+#endif /* STM32_ADC_USE_ADC1 */
+
+ /* ADC initial setup, starting the analog part here in order to reduce
+ the latency when starting a conversion.*/
+ adcp->adc->CR = ADC_CR_ADEN;
+ while (!(adcp->adc->ISR & ADC_ISR_ADRDY))
+ ;
+ }
+}
+
+/**
+ * @brief Deactivates the ADC peripheral.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ *
+ * @notapi
+ */
+void adc_lld_stop(ADCDriver *adcp) {
+
+ /* If in ready state then disables the ADC clock and analog part.*/
+ if (adcp->state == ADC_READY) {
+
+ dmaStreamRelease(adcp->dmastp);
+
+ /* Disabling ADC.*/
+ if (adcp->adc->CR & ADC_CR_ADEN) {
+ adc_lld_stop_adc(adcp->adc);
+ adcp->adc->CR |= ADC_CR_ADDIS;
+ while (adcp->adc->CR & ADC_CR_ADDIS)
+ ;
+ }
+
+#if STM32_ADC_USE_ADC1
+ if (&ADCD1 == adcp)
+ rccDisableADC1(FALSE);
+#endif
+ }
+}
+
+/**
+ * @brief Starts an ADC conversion.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ *
+ * @notapi
+ */
+void adc_lld_start_conversion(ADCDriver *adcp) {
+ uint32_t mode;
+ const ADCConversionGroup *grpp = adcp->grpp;
+
+ /* DMA setup.*/
+ mode = adcp->dmamode;
+ if (grpp->circular) {
+ mode |= STM32_DMA_CR_CIRC;
+ if (adcp->depth > 1) {
+ /* If circular buffer depth > 1, then the half transfer interrupt
+ is enabled in order to allow streaming processing.*/
+ mode |= STM32_DMA_CR_HTIE;
+ }
+ }
+ dmaStreamSetMemory0(adcp->dmastp, adcp->samples);
+ dmaStreamSetTransactionSize(adcp->dmastp, (uint32_t)grpp->num_channels *
+ (uint32_t)adcp->depth);
+ dmaStreamSetMode(adcp->dmastp, mode);
+ dmaStreamEnable(adcp->dmastp);
+
+ /* ADC setup, if it is defined a callback for the analog watch dog then it
+ is enabled.*/
+ adcp->adc->ISR = adcp->adc->ISR;
+ adcp->adc->IER = ADC_IER_OVRIE | ADC_IER_AWDIE;
+ adcp->adc->TR = grpp->tr;
+ adcp->adc->SMPR = grpp->smpr;
+ adcp->adc->CHSELR = grpp->chselr;
+
+ /* ADC configuration and start.*/
+ adcp->adc->CFGR1 = grpp->cfgr1 | ADC_CFGR1_CONT | ADC_CFGR1_DMACFG |
+ ADC_CFGR1_DMAEN;
+ adcp->adc->CR |= ADC_CR_ADSTART;
+}
+
+/**
+ * @brief Stops an ongoing conversion.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object
+ *
+ * @notapi
+ */
+void adc_lld_stop_conversion(ADCDriver *adcp) {
+
+ dmaStreamDisable(adcp->dmastp);
+ adc_lld_stop_adc(adcp->adc);
+}
+
+#endif /* HAL_USE_ADC */
+
+/** @} */
diff --git a/os/hal/ports/STM32/STM32F0xx/adc_lld.h b/os/hal/ports/STM32/STM32F0xx/adc_lld.h new file mode 100644 index 000000000..bddb6453a --- /dev/null +++ b/os/hal/ports/STM32/STM32F0xx/adc_lld.h @@ -0,0 +1,329 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32F0xx/adc_lld.h
+ * @brief STM32F0xx ADC subsystem low level driver header.
+ *
+ * @addtogroup ADC
+ * @{
+ */
+
+#ifndef _ADC_LLD_H_
+#define _ADC_LLD_H_
+
+#if HAL_USE_ADC || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @name Sampling rates
+ * @{
+ */
+#define ADC_SMPR_SMP_1P5 0 /**< @brief 14 cycles conversion time */
+#define ADC_SMPR_SMP_7P5 1 /**< @brief 21 cycles conversion time. */
+#define ADC_SMPR_SMP_13P5 2 /**< @brief 28 cycles conversion time. */
+#define ADC_SMPR_SMP_28P5 3 /**< @brief 41 cycles conversion time. */
+#define ADC_SMPR_SMP_41P5 4 /**< @brief 54 cycles conversion time. */
+#define ADC_SMPR_SMP_55P5 5 /**< @brief 68 cycles conversion time. */
+#define ADC_SMPR_SMP_71P5 6 /**< @brief 84 cycles conversion time. */
+#define ADC_SMPR_SMP_239P5 7 /**< @brief 252 cycles conversion time. */
+/** @} */
+
+/**
+ * @name Resolution
+ * @{
+ */
+#define ADC_CFGR1_RES_12BIT (0 << 3)
+#define ADC_CFGR1_RES_10BIT (1 << 3)
+#define ADC_CFGR1_RES_8BIT (2 << 3)
+#define ADC_CFGR1_RES_6BIT (3 << 3)
+/** @} */
+
+/**
+ * @name Threashold register initializer
+ * @{
+ */
+#define ADC_TR(low, high) (((uint32_t)(high) << 16) | (uint32_t)(low))
+/** @} */
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief ADC1 driver enable switch.
+ * @details If set to @p TRUE the support for ADC1 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_ADC_USE_ADC1) || defined(__DOXYGEN__)
+#define STM32_ADC_USE_ADC1 FALSE
+#endif
+
+/**
+ * @brief ADC1 DMA priority (0..3|lowest..highest).
+ */
+#if !defined(STM32_ADC_ADC1_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_ADC_ADC1_DMA_PRIORITY 2
+#endif
+
+/**
+ * @brief ADC interrupt priority level setting.
+ */
+#if !defined(STM32_ADC_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_ADC_IRQ_PRIORITY 2
+#endif
+
+/**
+ * @brief ADC1 DMA interrupt priority level setting.
+ */
+#if !defined(STM32_ADC_ADC1_DMA_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if STM32_ADC_USE_ADC1 && !STM32_HAS_ADC1
+#error "ADC1 not present in the selected device"
+#endif
+
+#if !STM32_ADC_USE_ADC1
+#error "ADC driver activated but no ADC peripheral assigned"
+#endif
+
+#if STM32_ADC_USE_ADC1 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_ADC_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to ADC1"
+#endif
+
+#if STM32_ADC_USE_ADC1 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_ADC_ADC1_DMA_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to ADC1 DMA"
+#endif
+
+#if STM32_ADC_USE_ADC1 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_ADC_ADC1_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to ADC1"
+#endif
+
+#if !defined(STM32_DMA_REQUIRED)
+#define STM32_DMA_REQUIRED
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief ADC sample data type.
+ */
+typedef uint16_t adcsample_t;
+
+/**
+ * @brief Channels number in a conversion group.
+ */
+typedef uint16_t adc_channels_num_t;
+
+/**
+ * @brief Possible ADC failure causes.
+ * @note Error codes are architecture dependent and should not relied
+ * upon.
+ */
+typedef enum {
+ ADC_ERR_DMAFAILURE = 0, /**< DMA operations failure. */
+ ADC_ERR_OVERFLOW = 1, /**< ADC overflow condition. */
+ ADC_ERR_AWD = 2 /**< Analog watchdog triggered. */
+} adcerror_t;
+
+/**
+ * @brief Type of a structure representing an ADC driver.
+ */
+typedef struct ADCDriver ADCDriver;
+
+/**
+ * @brief ADC notification callback type.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object triggering the
+ * callback
+ * @param[in] buffer pointer to the most recent samples data
+ * @param[in] n number of buffer rows available starting from @p buffer
+ */
+typedef void (*adccallback_t)(ADCDriver *adcp, adcsample_t *buffer, size_t n);
+
+/**
+ * @brief ADC error callback type.
+ *
+ * @param[in] adcp pointer to the @p ADCDriver object triggering the
+ * callback
+ * @param[in] err ADC error code
+ */
+typedef void (*adcerrorcallback_t)(ADCDriver *adcp, adcerror_t err);
+
+/**
+ * @brief Conversion group configuration structure.
+ * @details This implementation-dependent structure describes a conversion
+ * operation.
+ * @note The use of this configuration structure requires knowledge of
+ * STM32 ADC cell registers interface, please refer to the STM32
+ * reference manual for details.
+ */
+typedef struct {
+ /**
+ * @brief Enables the circular buffer mode for the group.
+ */
+ bool circular;
+ /**
+ * @brief Number of the analog channels belonging to the conversion group.
+ */
+ adc_channels_num_t num_channels;
+ /**
+ * @brief Callback function associated to the group or @p NULL.
+ */
+ adccallback_t end_cb;
+ /**
+ * @brief Error callback or @p NULL.
+ */
+ adcerrorcallback_t error_cb;
+ /* End of the mandatory fields.*/
+ /**
+ * @brief ADC CFGR1 register initialization data.
+ */
+ uint32_t cfgr1;
+ /**
+ * @brief ADC TR register initialization data.
+ */
+ uint32_t tr;
+ /**
+ * @brief ADC SMPR register initialization data.
+ */
+ uint32_t smpr;
+ /**
+ * @brief ADC CHSELR register initialization data.
+ * @details The number of bits at logic level one in this register must
+ * be equal to the number in the @p num_channels field.
+ */
+ uint32_t chselr;
+} ADCConversionGroup;
+
+/**
+ * @brief Driver configuration structure.
+ * @note It could be empty on some architectures.
+ */
+typedef struct {
+ uint32_t dummy;
+} ADCConfig;
+
+/**
+ * @brief Structure representing an ADC driver.
+ */
+struct ADCDriver {
+ /**
+ * @brief Driver state.
+ */
+ adcstate_t state;
+ /**
+ * @brief Current configuration data.
+ */
+ const ADCConfig *config;
+ /**
+ * @brief Current samples buffer pointer or @p NULL.
+ */
+ adcsample_t *samples;
+ /**
+ * @brief Current samples buffer depth or @p 0.
+ */
+ size_t depth;
+ /**
+ * @brief Current conversion group pointer or @p NULL.
+ */
+ const ADCConversionGroup *grpp;
+#if ADC_USE_WAIT || defined(__DOXYGEN__)
+ /**
+ * @brief Waiting thread.
+ */
+ thread_reference_t thread;
+#endif
+#if ADC_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
+ /**
+ * @brief Mutex protecting the peripheral.
+ */
+ mutex_t mutex;
+#endif /* ADC_USE_MUTUAL_EXCLUSION */
+#if defined(ADC_DRIVER_EXT_FIELDS)
+ ADC_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Pointer to the ADCx registers block.
+ */
+ ADC_TypeDef *adc;
+ /**
+ * @brief Pointer to associated DMA channel.
+ */
+ const stm32_dma_stream_t *dmastp;
+ /**
+ * @brief DMA mode bit mask.
+ */
+ uint32_t dmamode;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/**
+ * @brief Changes the value of the ADC CCR register.
+ * @details Use this function in order to enable or disable the internal
+ * analog sources. See the documentation in the STM32F0xx Reference
+ * Manual.
+ */
+#define adcSTM32SetCCR(ccr) (ADC->CCR = (ccr))
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if STM32_ADC_USE_ADC1 && !defined(__DOXYGEN__)
+extern ADCDriver ADCD1;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void adc_lld_init(void);
+ void adc_lld_start(ADCDriver *adcp);
+ void adc_lld_stop(ADCDriver *adcp);
+ void adc_lld_start_conversion(ADCDriver *adcp);
+ void adc_lld_stop_conversion(ADCDriver *adcp);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_ADC */
+
+#endif /* _ADC_LLD_H_ */
+
+/** @} */
diff --git a/os/hal/ports/STM32/STM32F0xx/ext_lld_isr.c b/os/hal/ports/STM32/STM32F0xx/ext_lld_isr.c new file mode 100644 index 000000000..fb5100e8c --- /dev/null +++ b/os/hal/ports/STM32/STM32F0xx/ext_lld_isr.c @@ -0,0 +1,197 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32F0xx/ext_lld_isr.c
+ * @brief STM32F0xx EXT subsystem low level driver ISR code.
+ *
+ * @addtogroup EXT
+ * @{
+ */
+
+#include "hal.h"
+
+#if HAL_USE_EXT || defined(__DOXYGEN__)
+
+#include "ext_lld_isr.h"
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/**
+ * @brief EXTI[0]...EXTI[1] interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(Vector54) {
+ uint32_t pr;
+
+ OSAL_IRQ_PROLOGUE();
+
+ pr = EXTI->PR & ((1 << 0) | (1 << 1));
+ EXTI->PR = pr;
+ if (pr & (1 << 0))
+ EXTD1.config->channels[0].cb(&EXTD1, 0);
+ if (pr & (1 << 1))
+ EXTD1.config->channels[1].cb(&EXTD1, 1);
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief EXTI[2]...EXTI[3] interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(Vector58) {
+ uint32_t pr;
+
+ OSAL_IRQ_PROLOGUE();
+
+ pr = EXTI->PR & ((1 << 2) | (1 << 3));
+ EXTI->PR = pr;
+ if (pr & (1 << 2))
+ EXTD1.config->channels[2].cb(&EXTD1, 2);
+ if (pr & (1 << 3))
+ EXTD1.config->channels[3].cb(&EXTD1, 3);
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief EXTI[4]...EXTI[15] interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(Vector5C) {
+ uint32_t pr;
+
+ OSAL_IRQ_PROLOGUE();
+
+ pr = EXTI->PR & ((1 << 4) | (1 << 5) | (1 << 6) | (1 << 7) | (1 << 8) |
+ (1 << 9) | (1 << 10) | (1 << 11) | (1 << 12) | (1 << 13) |
+ (1 << 14) | (1 << 15));
+ EXTI->PR = pr;
+ if (pr & (1 << 4))
+ EXTD1.config->channels[4].cb(&EXTD1, 4);
+ if (pr & (1 << 5))
+ EXTD1.config->channels[5].cb(&EXTD1, 5);
+ if (pr & (1 << 6))
+ EXTD1.config->channels[6].cb(&EXTD1, 6);
+ if (pr & (1 << 7))
+ EXTD1.config->channels[7].cb(&EXTD1, 7);
+ if (pr & (1 << 8))
+ EXTD1.config->channels[8].cb(&EXTD1, 8);
+ if (pr & (1 << 9))
+ EXTD1.config->channels[9].cb(&EXTD1, 9);
+ if (pr & (1 << 10))
+ EXTD1.config->channels[10].cb(&EXTD1, 10);
+ if (pr & (1 << 11))
+ EXTD1.config->channels[11].cb(&EXTD1, 11);
+ if (pr & (1 << 12))
+ EXTD1.config->channels[12].cb(&EXTD1, 12);
+ if (pr & (1 << 13))
+ EXTD1.config->channels[13].cb(&EXTD1, 13);
+ if (pr & (1 << 14))
+ EXTD1.config->channels[14].cb(&EXTD1, 14);
+ if (pr & (1 << 15))
+ EXTD1.config->channels[15].cb(&EXTD1, 15);
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief EXTI[16] interrupt handler (PVD).
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(Vector44) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ EXTI->PR = (1 << 16);
+ EXTD1.config->channels[16].cb(&EXTD1, 16);
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief EXTI[17] interrupt handler (RTC).
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(Vector48) {
+
+ OSAL_IRQ_PROLOGUE();
+
+ EXTI->PR = (1 << 17);
+ EXTD1.config->channels[17].cb(&EXTD1, 17);
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Enables EXTI IRQ sources.
+ *
+ * @notapi
+ */
+void ext_lld_exti_irq_enable(void) {
+
+ nvicEnableVector(EXTI0_1_IRQn, STM32_EXT_EXTI0_1_IRQ_PRIORITY);
+ nvicEnableVector(EXTI2_3_IRQn, STM32_EXT_EXTI2_3_IRQ_PRIORITY);
+ nvicEnableVector(EXTI4_15_IRQn, STM32_EXT_EXTI4_15_IRQ_PRIORITY);
+ nvicEnableVector(PVD_IRQn, STM32_EXT_EXTI16_IRQ_PRIORITY);
+ nvicEnableVector(RTC_IRQn, STM32_EXT_EXTI17_IRQ_PRIORITY);
+}
+
+/**
+ * @brief Disables EXTI IRQ sources.
+ *
+ * @notapi
+ */
+void ext_lld_exti_irq_disable(void) {
+
+ nvicDisableVector(EXTI0_1_IRQn);
+ nvicDisableVector(EXTI2_3_IRQn);
+ nvicDisableVector(EXTI4_15_IRQn);
+ nvicDisableVector(PVD_IRQn);
+ nvicDisableVector(RTC_IRQn);
+}
+
+#endif /* HAL_USE_EXT */
+
+/** @} */
diff --git a/os/hal/ports/STM32/STM32F0xx/ext_lld_isr.h b/os/hal/ports/STM32/STM32F0xx/ext_lld_isr.h new file mode 100644 index 000000000..9885fbc65 --- /dev/null +++ b/os/hal/ports/STM32/STM32F0xx/ext_lld_isr.h @@ -0,0 +1,107 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32F0xx/ext_lld_isr.h
+ * @brief STM32F0xx EXT subsystem low level driver ISR header.
+ *
+ * @addtogroup EXT
+ * @{
+ */
+
+#ifndef _EXT_LLD_ISR_H_
+#define _EXT_LLD_ISR_H_
+
+#if HAL_USE_EXT || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief EXTI0..1 interrupt priority level setting.
+ */
+#if !defined(STM32_EXT_EXTI0_1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3
+#endif
+
+/**
+ * @brief EXTI2..3 interrupt priority level setting.
+ */
+#if !defined(STM32_EXT_EXTI2_3_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3
+#endif
+
+/**
+ * @brief EXTI4..15 interrupt priority level setting.
+ */
+#if !defined(STM32_EXT_EXTI4_15_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3
+#endif
+
+/**
+ * @brief EXTI16 interrupt priority level setting.
+ */
+#if !defined(STM32_EXT_EXTI16_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_EXT_EXTI16_IRQ_PRIORITY 3
+#endif
+
+/**
+ * @brief EXTI17 interrupt priority level setting.
+ */
+#if !defined(STM32_EXT_EXTI17_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_EXT_EXTI17_IRQ_PRIORITY 3
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void ext_lld_exti_irq_enable(void);
+ void ext_lld_exti_irq_disable(void);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_EXT */
+
+#endif /* _EXT_LLD_ISR_H_ */
+
+/** @} */
diff --git a/os/hal/ports/STM32/STM32F0xx/hal_lld.c b/os/hal/ports/STM32/STM32F0xx/hal_lld.c new file mode 100644 index 000000000..9b6a85b91 --- /dev/null +++ b/os/hal/ports/STM32/STM32F0xx/hal_lld.c @@ -0,0 +1,199 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32F0xx/hal_lld.c
+ * @brief STM32F0xx HAL subsystem low level driver source.
+ *
+ * @addtogroup HAL
+ * @{
+ */
+
+#include "hal.h"
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Initializes the backup domain.
+ * @note WARNING! Changing clock source impossible without resetting
+ * of the whole BKP domain.
+ */
+static void hal_lld_backup_domain_init(void) {
+
+ /* Backup domain access enabled and left open.*/
+ PWR->CR |= PWR_CR_DBP;
+
+ /* Reset BKP domain if different clock source selected.*/
+ if ((RCC->BDCR & STM32_RTCSEL_MASK) != STM32_RTCSEL){
+ /* Backup domain reset.*/
+ RCC->BDCR = RCC_BDCR_BDRST;
+ RCC->BDCR = 0;
+ }
+
+ /* If enabled then the LSE is started.*/
+#if STM32_LSE_ENABLED
+#if defined(STM32_LSE_BYPASS)
+ /* LSE Bypass.*/
+ RCC->BDCR |= STM32_LSEDRV | RCC_BDCR_LSEON | RCC_BDCR_LSEBYP;
+#else
+ /* No LSE Bypass.*/
+ RCC->BDCR |= STM32_LSEDRV | RCC_BDCR_LSEON;
+#endif
+ while ((RCC->BDCR & RCC_BDCR_LSERDY) == 0)
+ ; /* Waits until LSE is stable. */
+#endif
+
+#if STM32_RTCSEL != STM32_RTCSEL_NOCLOCK
+ /* If the backup domain hasn't been initialized yet then proceed with
+ initialization.*/
+ if ((RCC->BDCR & RCC_BDCR_RTCEN) == 0) {
+ /* Selects clock source.*/
+ RCC->BDCR |= STM32_RTCSEL;
+
+ /* RTC clock enabled.*/
+ RCC->BDCR |= RCC_BDCR_RTCEN;
+ }
+#endif /* STM32_RTCSEL != STM32_RTCSEL_NOCLOCK */
+}
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief Low level HAL driver initialization.
+ *
+ * @notapi
+ */
+void hal_lld_init(void) {
+
+ /* Reset of all peripherals.*/
+ rccResetAPB1(0xFFFFFFFF);
+ rccResetAPB2(~RCC_APB2RSTR_DBGMCURST);
+
+ /* PWR clock enabled.*/
+ rccEnablePWRInterface(FALSE);
+
+ /* Initializes the backup domain.*/
+ hal_lld_backup_domain_init();
+
+#if defined(STM32_DMA_REQUIRED)
+ dmaInit();
+#endif
+
+ /* Programmable voltage detector enable.*/
+#if STM32_PVD_ENABLE
+ PWR->CR |= PWR_CR_PVDE | (STM32_PLS & STM32_PLS_MASK);
+#endif /* STM32_PVD_ENABLE */
+}
+
+/**
+ * @brief STM32 clocks and PLL initialization.
+ * @note All the involved constants come from the file @p board.h.
+ * @note This function should be invoked just after the system reset.
+ *
+ * @special
+ */
+void stm32_clock_init(void) {
+
+#if !STM32_NO_INIT
+ /* HSI setup, it enforces the reset situation in order to handle possible
+ problems with JTAG probes and re-initializations.*/
+ RCC->CR |= RCC_CR_HSION; /* Make sure HSI is ON. */
+ while (!(RCC->CR & RCC_CR_HSIRDY))
+ ; /* Wait until HSI is stable. */
+ RCC->CR &= RCC_CR_HSITRIM | RCC_CR_HSION; /* CR Reset value. */
+ RCC->CFGR = 0; /* CFGR reset value. */
+ while ((RCC->CFGR & RCC_CFGR_SWS) != RCC_CFGR_SWS_HSI)
+ ; /* Waits until HSI is selected. */
+
+#if STM32_HSE_ENABLED
+ /* HSE activation.*/
+#if defined(STM32_HSE_BYPASS)
+ /* HSE Bypass.*/
+ RCC->CR |= RCC_CR_HSEON | RCC_CR_HSEBYP;
+#else
+ /* No HSE Bypass.*/
+ RCC->CR |= RCC_CR_HSEON;
+#endif
+ while (!(RCC->CR & RCC_CR_HSERDY))
+ ; /* Waits until HSE is stable. */
+#endif
+
+#if STM32_HSE14_ENABLED
+ /* HSI14 activation.*/
+ RCC->CR2 |= RCC_CR2_HSI14ON;
+ while (!(RCC->CR2 & RCC_CR2_HSI14RDY))
+ ; /* Waits until HSI14 is stable. */
+#endif
+
+#if STM32_LSI_ENABLED
+ /* LSI activation.*/
+ RCC->CSR |= RCC_CSR_LSION;
+ while ((RCC->CSR & RCC_CSR_LSIRDY) == 0)
+ ; /* Waits until LSI is stable. */
+#endif
+
+ /* Clock settings.*/
+ RCC->CFGR = STM32_MCOSEL | STM32_PLLMUL | STM32_PLLSRC |
+ STM32_ADCPRE | STM32_PPRE | STM32_HPRE;
+ RCC->CFGR2 = STM32_PREDIV;
+ RCC->CFGR3 = STM32_ADCSW | STM32_CECSW | STM32_I2C1SW |
+ STM32_USART1SW;
+
+#if STM32_ACTIVATE_PLL
+ /* PLL activation.*/
+ RCC->CR |= RCC_CR_PLLON;
+ while (!(RCC->CR & RCC_CR_PLLRDY))
+ ; /* Waits until PLL is stable. */
+#endif
+
+ /* Flash setup and final clock selection. */
+ FLASH->ACR = STM32_FLASHBITS;
+
+ /* Switching to the configured clock source if it is different from HSI.*/
+#if (STM32_SW != STM32_SW_HSI)
+ /* Switches clock source.*/
+ RCC->CFGR |= STM32_SW;
+ while ((RCC->CFGR & RCC_CFGR_SWS) != (STM32_SW << 2))
+ ; /* Waits selection complete. */
+#endif
+
+ /* SYSCFG clock enabled here because it is a multi-functional unit shared
+ among multiple drivers.*/
+ rccEnableAPB2(RCC_APB2ENR_SYSCFGEN, TRUE);
+#endif /* !STM32_NO_INIT */
+}
+
+/** @} */
diff --git a/os/hal/ports/STM32/STM32F0xx/hal_lld.h b/os/hal/ports/STM32/STM32F0xx/hal_lld.h new file mode 100644 index 000000000..044b13a37 --- /dev/null +++ b/os/hal/ports/STM32/STM32F0xx/hal_lld.h @@ -0,0 +1,791 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32F0xx/hal_lld.h
+ * @brief STM32F0xx HAL subsystem low level driver header.
+ * @pre This module requires the following macros to be defined in the
+ * @p board.h file:
+ * - STM32_LSECLK.
+ * - STM32_LSEDRV.
+ * - STM32_LSE_BYPASS (optionally).
+ * - STM32_HSECLK.
+ * - STM32_HSE_BYPASS (optionally).
+ * .
+ * One of the following macros must also be defined:
+ * - STM32F030 for Value Line devices.
+ * - STM32F0XX_LD for Low Density devices.
+ * - STM32F0XX_MD for Medium Density devices.
+ * .
+ *
+ * @addtogroup HAL
+ * @{
+ */
+
+#ifndef _HAL_LLD_H_
+#define _HAL_LLD_H_
+
+#include "stm32_registry.h"
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @name Platform identification macros
+ * @{
+ */
+#if defined(STM32F0XX_MD) || defined(__DOXYGEN__)
+#define PLATFORM_NAME "STM32F051xx/F061xx Entry Level Medium Density devices"
+#define STM32F0XX
+
+#elif defined(STM32F0XX_LD)
+#define PLATFORM_NAME "STM32F050xx/F060xx Entry Level Low Density devices"
+#define STM32F0XX
+
+#elif defined(STM32F030)
+#define PLATFORM_NAME "STM32F050xx/F060xx Entry Level Value Line devices"
+#define STM32F0XX
+
+#else
+#error "STM32F0xx device not specified"
+#endif
+/** @} */
+
+/**
+ * @name Absolute Maximum Ratings
+ * @{
+ */
+/**
+ * @brief Maximum system clock frequency.
+ */
+#define STM32_SYSCLK_MAX 48000000
+
+/**
+ * @brief Maximum HSE clock frequency.
+ */
+#define STM32_HSECLK_MAX 32000000
+
+/**
+ * @brief Minimum HSE clock frequency.
+ */
+#define STM32_HSECLK_MIN 1000000
+
+/**
+ * @brief Maximum LSE clock frequency.
+ */
+#define STM32_LSECLK_MAX 1000000
+
+/**
+ * @brief Minimum LSE clock frequency.
+ */
+#define STM32_LSECLK_MIN 32768
+
+/**
+ * @brief Maximum PLLs input clock frequency.
+ */
+#define STM32_PLLIN_MAX 25000000
+
+/**
+ * @brief Minimum PLLs input clock frequency.
+ */
+#define STM32_PLLIN_MIN 1000000
+
+/**
+ * @brief Maximum PLL output clock frequency.
+ */
+#define STM32_PLLOUT_MAX 48000000
+
+/**
+ * @brief Minimum PLL output clock frequency.
+ */
+#define STM32_PLLOUT_MIN 16000000
+
+/**
+ * @brief Maximum APB clock frequency.
+ */
+#define STM32_PCLK_MAX 48000000
+
+/**
+ * @brief Maximum ADC clock frequency.
+ */
+#define STM32_ADCCLK_MAX 14000000
+/** @} */
+
+/**
+ * @name Internal clock sources
+ * @{
+ */
+#define STM32_HSICLK 8000000 /**< High speed internal clock. */
+#define STM32_HSI14CLK 14000000 /**< 14MHz speed internal clock.*/
+#define STM32_LSICLK 40000 /**< Low speed internal clock. */
+/** @} */
+
+/**
+ * @name PWR_CR register bits definitions
+ * @{
+ */
+#define STM32_PLS_MASK (7 << 5) /**< PLS bits mask. */
+#define STM32_PLS_LEV0 (0 << 5) /**< PVD level 0. */
+#define STM32_PLS_LEV1 (1 << 5) /**< PVD level 1. */
+#define STM32_PLS_LEV2 (2 << 5) /**< PVD level 2. */
+#define STM32_PLS_LEV3 (3 << 5) /**< PVD level 3. */
+#define STM32_PLS_LEV4 (4 << 5) /**< PVD level 4. */
+#define STM32_PLS_LEV5 (5 << 5) /**< PVD level 5. */
+#define STM32_PLS_LEV6 (6 << 5) /**< PVD level 6. */
+#define STM32_PLS_LEV7 (7 << 5) /**< PVD level 7. */
+/** @} */
+
+/**
+ * @name RCC_CFGR register bits definitions
+ * @{
+ */
+#define STM32_SW_HSI (0 << 0) /**< SYSCLK source is HSI. */
+#define STM32_SW_HSE (1 << 0) /**< SYSCLK source is HSE. */
+#define STM32_SW_PLL (2 << 0) /**< SYSCLK source is PLL. */
+
+#define STM32_HPRE_DIV1 (0 << 4) /**< SYSCLK divided by 1. */
+#define STM32_HPRE_DIV2 (8 << 4) /**< SYSCLK divided by 2. */
+#define STM32_HPRE_DIV4 (9 << 4) /**< SYSCLK divided by 4. */
+#define STM32_HPRE_DIV8 (10 << 4) /**< SYSCLK divided by 8. */
+#define STM32_HPRE_DIV16 (11 << 4) /**< SYSCLK divided by 16. */
+#define STM32_HPRE_DIV64 (12 << 4) /**< SYSCLK divided by 64. */
+#define STM32_HPRE_DIV128 (13 << 4) /**< SYSCLK divided by 128. */
+#define STM32_HPRE_DIV256 (14 << 4) /**< SYSCLK divided by 256. */
+#define STM32_HPRE_DIV512 (15 << 4) /**< SYSCLK divided by 512. */
+
+#define STM32_PPRE_DIV1 (0 << 8) /**< HCLK divided by 1. */
+#define STM32_PPRE_DIV2 (4 << 8) /**< HCLK divided by 2. */
+#define STM32_PPRE_DIV4 (5 << 8) /**< HCLK divided by 4. */
+#define STM32_PPRE_DIV8 (6 << 8) /**< HCLK divided by 8. */
+#define STM32_PPRE_DIV16 (7 << 8) /**< HCLK divided by 16. */
+
+#define STM32_ADCPRE_DIV2 (0 << 14) /**< PCLK divided by 2. */
+#define STM32_ADCPRE_DIV4 (1 << 14) /**< PCLK divided by 4. */
+
+#define STM32_PLLSRC_HSI (0 << 16) /**< PLL clock source is HSI. */
+#define STM32_PLLSRC_HSE (1 << 16) /**< PLL clock source is HSE. */
+
+#define STM32_MCOSEL_NOCLOCK (0 << 24) /**< No clock on MCO pin. */
+#define STM32_MCOSEL_HSI14 (3 << 24) /**< HSI14 clock on MCO pin. */
+#define STM32_MCOSEL_SYSCLK (4 << 24) /**< SYSCLK on MCO pin. */
+#define STM32_MCOSEL_HSI (5 << 24) /**< HSI clock on MCO pin. */
+#define STM32_MCOSEL_HSE (6 << 24) /**< HSE clock on MCO pin. */
+#define STM32_MCOSEL_PLLDIV2 (7 << 24) /**< PLL/2 clock on MCO pin. */
+/** @} */
+
+/**
+ * @name RCC_BDCR register bits definitions
+ * @{
+ */
+#define STM32_RTCSEL_MASK (3 << 8) /**< RTC clock source mask. */
+#define STM32_RTCSEL_NOCLOCK (0 << 8) /**< No clock. */
+#define STM32_RTCSEL_LSE (1 << 8) /**< LSE used as RTC clock. */
+#define STM32_RTCSEL_LSI (2 << 8) /**< LSI used as RTC clock. */
+#define STM32_RTCSEL_HSEDIV (3 << 8) /**< HSE divided by 32 used as
+ RTC clock. */
+/** @} */
+
+/**
+ * @name RCC_CFGR3 register bits definitions
+ * @{
+ */
+#define STM32_USART1SW_MASK (3 << 0) /**< USART1 clock source mask. */
+#define STM32_USART1SW_PCLK (0 << 0) /**< USART1 clock is PCLK. */
+#define STM32_USART1SW_SYSCLK (1 << 0) /**< USART1 clock is SYSCLK. */
+#define STM32_USART1SW_LSE (2 << 0) /**< USART1 clock is LSE. */
+#define STM32_USART1SW_HSI (3 << 0) /**< USART1 clock is HSI. */
+#define STM32_I2C1SW_MASK (1 << 4) /**< I2C clock source mask. */
+#define STM32_I2C1SW_HSI (0 << 4) /**< I2C clock is HSI. */
+#define STM32_I2C1SW_SYSCLK (1 << 4) /**< I2C clock is SYSCLK. */
+#define STM32_CECSW_MASK (1 << 6) /**< CEC clock source mask. */
+#define STM32_CECSW_HSI (0 << 6) /**< CEC clock is HSI/244. */
+#define STM32_CECSW_LSE (1 << 6) /**< CEC clock is LSE. */
+#define STM32_ADCSW_MASK (1 << 8) /**< ADC clock source mask. */
+#define STM32_ADCSW_HSI14 (0 << 8) /**< ADC clock is HSI14. */
+#define STM32_ADCSW_PCLK (1 << 8) /**< ADC clock is PCLK/2|4. */
+/** @} */
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief Disables the PWR/RCC initialization in the HAL.
+ */
+#if !defined(STM32_NO_INIT) || defined(__DOXYGEN__)
+#define STM32_NO_INIT FALSE
+#endif
+
+/**
+ * @brief Enables or disables the programmable voltage detector.
+ */
+#if !defined(STM32_PVD_ENABLE) || defined(__DOXYGEN__)
+#define STM32_PVD_ENABLE FALSE
+#endif
+
+/**
+ * @brief Sets voltage level for programmable voltage detector.
+ */
+#if !defined(STM32_PLS) || defined(__DOXYGEN__)
+#define STM32_PLS STM32_PLS_LEV0
+#endif
+
+/**
+ * @brief Enables or disables the HSI clock source.
+ */
+#if !defined(STM32_HSI_ENABLED) || defined(__DOXYGEN__)
+#define STM32_HSI_ENABLED TRUE
+#endif
+
+/**
+ * @brief Enables or disables the HSI14 clock source.
+ */
+#if !defined(STM32_HSI14_ENABLED) || defined(__DOXYGEN__)
+#define STM32_HSI14_ENABLED TRUE
+#endif
+
+/**
+ * @brief Enables or disables the LSI clock source.
+ */
+#if !defined(STM32_LSI_ENABLED) || defined(__DOXYGEN__)
+#define STM32_LSI_ENABLED FALSE
+#endif
+
+/**
+ * @brief Enables or disables the HSE clock source.
+ */
+#if !defined(STM32_HSE_ENABLED) || defined(__DOXYGEN__)
+#define STM32_HSE_ENABLED TRUE
+#endif
+
+/**
+ * @brief Enables or disables the LSE clock source.
+ */
+#if !defined(STM32_LSE_ENABLED) || defined(__DOXYGEN__)
+#define STM32_LSE_ENABLED FALSE
+#endif
+
+/**
+ * @brief Main clock source selection.
+ * @note If the selected clock source is not the PLL then the PLL is not
+ * initialized and started.
+ * @note The default value is calculated for a 48MHz system clock from
+ * a 8MHz crystal using the PLL.
+ */
+#if !defined(STM32_SW) || defined(__DOXYGEN__)
+#define STM32_SW STM32_SW_PLL
+#endif
+
+/**
+ * @brief Clock source for the PLL.
+ * @note This setting has only effect if the PLL is selected as the
+ * system clock source.
+ * @note The default value is calculated for a 48MHz system clock from
+ * a 8MHz crystal using the PLL.
+ */
+#if !defined(STM32_PLLSRC) || defined(__DOXYGEN__)
+#define STM32_PLLSRC STM32_PLLSRC_HSE
+#endif
+
+/**
+ * @brief Crystal PLL pre-divider.
+ * @note This setting has only effect if the PLL is selected as the
+ * system clock source.
+ * @note The default value is calculated for a 72MHz system clock from
+ * a 8MHz crystal using the PLL.
+ */
+#if !defined(STM32_PREDIV_VALUE) || defined(__DOXYGEN__)
+#define STM32_PREDIV_VALUE 1
+#endif
+
+/**
+ * @brief PLL multiplier value.
+ * @note The allowed range is 2...16.
+ * @note The default value is calculated for a 48MHz system clock from
+ * a 8MHz crystal using the PLL.
+ */
+#if !defined(STM32_PLLMUL_VALUE) || defined(__DOXYGEN__)
+#define STM32_PLLMUL_VALUE 6
+#endif
+
+/**
+ * @brief AHB prescaler value.
+ * @note The default value is calculated for a 48MHz system clock from
+ * a 8MHz crystal using the PLL.
+ */
+#if !defined(STM32_HPRE) || defined(__DOXYGEN__)
+#define STM32_HPRE STM32_HPRE_DIV1
+#endif
+
+/**
+ * @brief APB1 prescaler value.
+ */
+#if !defined(STM32_PPRE) || defined(__DOXYGEN__)
+#define STM32_PPRE STM32_PPRE_DIV1
+#endif
+
+/**
+ * @brief MCO pin setting.
+ */
+#if !defined(STM32_MCOSEL) || defined(__DOXYGEN__)
+#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
+#endif
+
+/**
+ * @brief ADC prescaler value.
+ */
+#if !defined(STM32_ADCPRE) || defined(__DOXYGEN__)
+#define STM32_ADCPRE STM32_ADCPRE_DIV4
+#endif
+
+/**
+ * @brief ADC clock source.
+ */
+#if !defined(STM32_ADCSW) || defined(__DOXYGEN__)
+#define STM32_ADCSW STM32_ADCSW_HSI14
+#endif
+
+/**
+ * @brief CEC clock source.
+ */
+#if !defined(STM32_CECSW) || defined(__DOXYGEN__)
+#define STM32_CECSW STM32_CECSW_HSI
+#endif
+
+/**
+ * @brief I2C1 clock source.
+ */
+#if !defined(STM32_I2C1SW) || defined(__DOXYGEN__)
+#define STM32_I2C1SW STM32_I2C1SW_HSI
+#endif
+
+/**
+ * @brief USART1 clock source.
+ */
+#if !defined(STM32_USART1SW) || defined(__DOXYGEN__)
+#define STM32_USART1SW STM32_USART1SW_PCLK
+#endif
+
+/**
+ * @brief RTC clock source.
+ */
+#if !defined(STM32_RTCSEL) || defined(__DOXYGEN__)
+#define STM32_RTCSEL STM32_RTCSEL_LSI
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*
+ * Configuration-related checks.
+ */
+#if !defined(STM32F0xx_MCUCONF)
+#error "Using a wrong mcuconf.h file, STM32F0xx_MCUCONF not defined"
+#endif
+
+/*
+ * HSI related checks.
+ */
+#if STM32_HSI_ENABLED
+#else /* !STM32_HSI_ENABLED */
+
+#if STM32_SW == STM32_SW_HSI
+#error "HSI not enabled, required by STM32_SW"
+#endif
+
+#if STM32_CECSW == STM32_CECSW_HSI
+#error "HSI not enabled, required by STM32_CECSW"
+#endif
+
+#if STM32_I2C1SW == STM32_I2C1SW_HSI
+#error "HSI not enabled, required by STM32_I2C1SW"
+#endif
+
+#if STM32_USART1SW == STM32_USART1SW_HSI
+#error "HSI not enabled, required by STM32_USART1SW"
+#endif
+
+#if (STM32_SW == STM32_SW_PLL) && (STM32_PLLSRC == STM32_PLLSRC_HSI)
+#error "HSI not enabled, required by STM32_SW and STM32_PLLSRC"
+#endif
+
+#if (STM32_MCOSEL == STM32_MCOSEL_HSI) || \
+ ((STM32_MCOSEL == STM32_MCOSEL_PLLDIV2) && \
+ (STM32_PLLSRC == STM32_PLLSRC_HSI))
+#error "HSI not enabled, required by STM32_MCOSEL"
+#endif
+
+#endif /* !STM32_HSI_ENABLED */
+
+/*
+ * HSI14 related checks.
+ */
+#if STM32_HSI14_ENABLED
+#else /* !STM32_HSI14_ENABLED */
+
+#if STM32_MCOSEL == STM32_MCOSEL_HSI14
+#error "HSI14 not enabled, required by STM32_MCOSEL"
+#endif
+
+#if STM32_ADCSW == STM32_ADCSW_HSI14
+#error "HSI14 not enabled, required by STM32_ADCSW"
+#endif
+
+#endif /* !STM32_HSI14_ENABLED */
+
+/*
+ * HSE related checks.
+ */
+#if STM32_HSE_ENABLED
+
+#if STM32_HSECLK == 0
+#error "HSE frequency not defined"
+#elif (STM32_HSECLK < STM32_HSECLK_MIN) || (STM32_HSECLK > STM32_HSECLK_MAX)
+#error "STM32_HSECLK outside acceptable range (STM32_HSECLK_MIN...STM32_HSECLK_MAX)"
+#endif
+
+#else /* !STM32_HSE_ENABLED */
+
+#if STM32_SW == STM32_SW_HSE
+#error "HSE not enabled, required by STM32_SW"
+#endif
+
+#if (STM32_SW == STM32_SW_PLL) && (STM32_PLLSRC == STM32_PLLSRC_HSE)
+#error "HSE not enabled, required by STM32_SW and STM32_PLLSRC"
+#endif
+
+#if (STM32_MCOSEL == STM32_MCOSEL_HSE) || \
+ ((STM32_MCOSEL == STM32_MCOSEL_PLLDIV2) && \
+ (STM32_PLLSRC == STM32_PLLSRC_HSE))
+#error "HSE not enabled, required by STM32_MCOSEL"
+#endif
+
+#if STM32_RTCSEL == STM32_RTCSEL_HSEDIV
+#error "HSE not enabled, required by STM32_RTCSEL"
+#endif
+
+#endif /* !STM32_HSE_ENABLED */
+
+/*
+ * LSI related checks.
+ */
+#if STM32_LSI_ENABLED
+#else /* !STM32_LSI_ENABLED */
+
+#if STM32_RTCSEL == STM32_RTCSEL_LSI
+#error "LSI not enabled, required by STM32_RTCSEL"
+#endif
+
+#endif /* !STM32_LSI_ENABLED */
+
+/*
+ * LSE related checks.
+ */
+#if STM32_LSE_ENABLED
+
+#if (STM32_LSECLK == 0)
+#error "LSE frequency not defined"
+#endif
+
+#if (STM32_LSECLK < STM32_LSECLK_MIN) || (STM32_LSECLK > STM32_LSECLK_MAX)
+#error "STM32_LSECLK outside acceptable range (STM32_LSECLK_MIN...STM32_LSECLK_MAX)"
+#endif
+
+#if !defined(STM32_LSEDRV)
+#error "STM32_LSEDRV not defined"
+#endif
+
+#if (STM32_LSEDRV >> 3) > 3
+#error "STM32_LSEDRV outside acceptable range ((0<<3)...(3<<3))"
+#endif
+
+#if STM32_CECSW == STM32_CECSW_LSE
+#error "LSE not enabled, required by STM32_CECSW"
+#endif
+
+#if STM32_USART1SW == STM32_USART1SW_LSE
+#error "LSE not enabled, required by STM32_USART1SW"
+#endif
+
+#else /* !STM32_LSE_ENABLED */
+
+#if STM32_RTCSEL == STM32_RTCSEL_LSE
+#error "LSE not enabled, required by STM32_RTCSEL"
+#endif
+
+#endif /* !STM32_LSE_ENABLED */
+
+/* PLL activation conditions.*/
+#if (STM32_SW == STM32_SW_PLL) || \
+ (STM32_MCOSEL == STM32_MCOSEL_PLLDIV2) || \
+ defined(__DOXYGEN__)
+/**
+ * @brief PLL activation flag.
+ */
+#define STM32_ACTIVATE_PLL TRUE
+#else
+#define STM32_ACTIVATE_PLL FALSE
+#endif
+
+/* HSE prescaler setting check.*/
+#if ((STM32_PREDIV_VALUE >= 1) || (STM32_PREDIV_VALUE <= 16))
+#define STM32_PREDIV ((STM32_PREDIV_VALUE - 1) << 0)
+#else
+#error "invalid STM32_PREDIV value specified"
+#endif
+
+/**
+ * @brief PLLMUL field.
+ */
+#if ((STM32_PLLMUL_VALUE >= 2) && (STM32_PLLMUL_VALUE <= 16)) || \
+ defined(__DOXYGEN__)
+#define STM32_PLLMUL ((STM32_PLLMUL_VALUE - 2) << 18)
+#else
+#error "invalid STM32_PLLMUL_VALUE value specified"
+#endif
+
+/**
+ * @brief PLL input clock frequency.
+ */
+#if (STM32_PLLSRC == STM32_PLLSRC_HSE) || defined(__DOXYGEN__)
+#define STM32_PLLCLKIN (STM32_HSECLK / STM32_PREDIV_VALUE)
+#elif STM32_PLLSRC == STM32_PLLSRC_HSI
+#define STM32_PLLCLKIN (STM32_HSICLK / 2)
+#else
+#error "invalid STM32_PLLSRC value specified"
+#endif
+
+/* PLL input frequency range check.*/
+#if (STM32_PLLCLKIN < STM32_PLLIN_MIN) || (STM32_PLLCLKIN > STM32_PLLIN_MAX)
+#error "STM32_PLLCLKIN outside acceptable range (STM32_PLLIN_MIN...STM32_PLLIN_MAX)"
+#endif
+
+/**
+ * @brief PLL output clock frequency.
+ */
+#define STM32_PLLCLKOUT (STM32_PLLCLKIN * STM32_PLLMUL_VALUE)
+
+/* PLL output frequency range check.*/
+#if (STM32_PLLCLKOUT < STM32_PLLOUT_MIN) || (STM32_PLLCLKOUT > STM32_PLLOUT_MAX)
+#error "STM32_PLLCLKOUT outside acceptable range (STM32_PLLOUT_MIN...STM32_PLLOUT_MAX)"
+#endif
+
+/**
+ * @brief System clock source.
+ */
+#if (STM32_SW == STM32_SW_PLL) || defined(__DOXYGEN__)
+#define STM32_SYSCLK STM32_PLLCLKOUT
+#elif (STM32_SW == STM32_SW_HSI)
+#define STM32_SYSCLK STM32_HSICLK
+#elif (STM32_SW == STM32_SW_HSE)
+#define STM32_SYSCLK STM32_HSECLK
+#else
+#error "invalid STM32_SW value specified"
+#endif
+
+/* Check on the system clock.*/
+#if STM32_SYSCLK > STM32_SYSCLK_MAX
+#error "STM32_SYSCLK above maximum rated frequency (STM32_SYSCLK_MAX)"
+#endif
+
+/**
+ * @brief AHB frequency.
+ */
+#if (STM32_HPRE == STM32_HPRE_DIV1) || defined(__DOXYGEN__)
+#define STM32_HCLK (STM32_SYSCLK / 1)
+#elif STM32_HPRE == STM32_HPRE_DIV2
+#define STM32_HCLK (STM32_SYSCLK / 2)
+#elif STM32_HPRE == STM32_HPRE_DIV4
+#define STM32_HCLK (STM32_SYSCLK / 4)
+#elif STM32_HPRE == STM32_HPRE_DIV8
+#define STM32_HCLK (STM32_SYSCLK / 8)
+#elif STM32_HPRE == STM32_HPRE_DIV16
+#define STM32_HCLK (STM32_SYSCLK / 16)
+#elif STM32_HPRE == STM32_HPRE_DIV64
+#define STM32_HCLK (STM32_SYSCLK / 64)
+#elif STM32_HPRE == STM32_HPRE_DIV128
+#define STM32_HCLK (STM32_SYSCLK / 128)
+#elif STM32_HPRE == STM32_HPRE_DIV256
+#define STM32_HCLK (STM32_SYSCLK / 256)
+#elif STM32_HPRE == STM32_HPRE_DIV512
+#define STM32_HCLK (STM32_SYSCLK / 512)
+#else
+#error "invalid STM32_HPRE value specified"
+#endif
+
+/* AHB frequency check.*/
+#if STM32_HCLK > STM32_SYSCLK_MAX
+#error "STM32_HCLK exceeding maximum frequency (STM32_SYSCLK_MAX)"
+#endif
+
+/**
+ * @brief APB frequency.
+ */
+#if (STM32_PPRE == STM32_PPRE_DIV1) || defined(__DOXYGEN__)
+#define STM32_PCLK (STM32_HCLK / 1)
+#elif STM32_PPRE == STM32_PPRE_DIV2
+#define STM32_PCLK (STM32_HCLK / 2)
+#elif STM32_PPRE == STM32_PPRE_DIV4
+#define STM32_PCLK (STM32_HCLK / 4)
+#elif STM32_PPRE == STM32_PPRE_DIV8
+#define STM32_PCLK (STM32_HCLK / 8)
+#elif STM32_PPRE == STM32_PPRE_DIV16
+#define STM32_PCLK (STM32_HCLK / 16)
+#else
+#error "invalid STM32_PPRE value specified"
+#endif
+
+/* APB frequency check.*/
+#if STM32_PCLK > STM32_PCLK_MAX
+#error "STM32_PCLK exceeding maximum frequency (STM32_PCLK_MAX)"
+#endif
+
+/**
+ * @brief RTC clock.
+ */
+#if (STM32_RTCSEL == STM32_RTCSEL_LSE) || defined(__DOXYGEN__)
+#define STM32_RTCCLK STM32_LSECLK
+#elif STM32_RTCSEL == STM32_RTCSEL_LSI
+#define STM32_RTCCLK STM32_LSICLK
+#elif STM32_RTCSEL == STM32_RTCSEL_HSEDIV
+#define STM32_RTCCLK (STM32_HSECLK / 32)
+#elif STM32_RTCSEL == STM32_RTCSEL_NOCLOCK
+#define STM32_RTCCLK 0
+#else
+#error "invalid source selected for RTC clock"
+#endif
+
+/**
+ * @brief ADC frequency.
+ */
+#if STM32_ADCSW == STM32_ADCSW_HSI14
+#define STM32_ADCCLK STM32_HSI14CLK
+#elif STM32_ADCSW == STM32_ADCSW_PCLK
+#if (STM32_ADCPRE == STM32_ADCPRE_DIV2) || defined(__DOXYGEN__)
+#define STM32_ADCCLK (STM32_PCLK / 2)
+#elif STM32_ADCPRE == STM32_ADCPRE_DIV4
+#define STM32_ADCCLK (STM32_PCLK / 4)
+#else
+#error "invalid STM32_ADCPRE value specified"
+#endif
+#else
+#error "invalid source selected for ADC clock"
+#endif
+
+/* ADC frequency check.*/
+#if STM32_ADCCLK > STM32_ADCCLK_MAX
+#error "STM32_ADCCLK exceeding maximum frequency (STM32_ADCCLK_MAX)"
+#endif
+
+/**
+ * @brief CEC frequency.
+ */
+#if STM32_CECSW == STM32_CECSW_HSI
+#define STM32_CECCLK STM32_HSICLK
+#elif STM32_CECSW == STM32_CECSW_LSE
+#define STM32_CECCLK STM32_LSECLK
+#else
+#error "invalid source selected for CEC clock"
+#endif
+
+/**
+ * @brief I2C1 frequency.
+ */
+#if STM32_I2CSW == STM32_I2C1SW_HSI
+#define STM32_I2C1CLK STM32_HSICLK
+#elif STM32_I2CSW == STM32_I2C1SW_SYSCLK
+#define STM32_I2C1CLK STM32_SYSCLK
+#else
+#error "invalid source selected for I2C1 clock"
+#endif
+
+/**
+ * @brief USART1 frequency.
+ */
+#if STM32_USART1SW == STM32_USART1SW_PCLK
+#define STM32_USART1CLK STM32_PCLK
+#elif STM32_USART1SW == STM32_USART1SW_SYSCLK
+#define STM32_USART1CLK STM32_SYSCLK
+#elif STM32_USART1SW == STM32_USART1SW_LSECLK
+#define STM32_USART1CLK STM32_LSECLK
+#elif STM32_USART1SW == STM32_USART1SW_HSICLK
+#define STM32_USART1CLK STM32_HSICLK
+#else
+#error "invalid source selected for USART1 clock"
+#endif
+
+/**
+ * @brief USART2 frequency.
+ */
+#define STM32_USART2CLK STM32_PCLK
+
+/**
+ * @brief Timers clock.
+ */
+#if (STM32_PPRE == STM32_PPRE_DIV1) || defined(__DOXYGEN__)
+#define STM32_TIMCLK1 (STM32_PCLK * 1)
+#define STM32_TIMCLK2 (STM32_PCLK * 1)
+#else
+#define STM32_TIMCLK1 (STM32_PCLK * 2)
+#define STM32_TIMCLK2 (STM32_PCLK * 2)
+#endif
+
+/**
+ * @brief Flash settings.
+ */
+#if (STM32_HCLK <= 24000000) || defined(__DOXYGEN__)
+#define STM32_FLASHBITS 0x00000010
+#else
+#define STM32_FLASHBITS 0x00000011
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+/* Various helpers.*/
+#include "nvic.h"
+#include "stm32_isr.h"
+#include "stm32_dma.h"
+#include "stm32_rcc.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void hal_lld_init(void);
+ void stm32_clock_init(void);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _HAL_LLD_H_ */
+
+/** @} */
diff --git a/os/hal/ports/STM32/STM32F0xx/platform.mk b/os/hal/ports/STM32/STM32F0xx/platform.mk new file mode 100644 index 000000000..df5dbc321 --- /dev/null +++ b/os/hal/ports/STM32/STM32F0xx/platform.mk @@ -0,0 +1,28 @@ +# List of all the STM32F0xx platform files.
+PLATFORMSRC = ${CHIBIOS}/os/hal/ports/common/ARMCMx/nvic.c \
+ ${CHIBIOS}/os/hal/ports/STM32F0xx/stm32_dma.c \
+ ${CHIBIOS}/os/hal/ports/STM32F0xx/hal_lld.c \
+ ${CHIBIOS}/os/hal/ports/STM32F0xx/adc_lld.c \
+ ${CHIBIOS}/os/hal/ports/STM32F0xx/ext_lld_isr.c \
+ ${CHIBIOS}/os/hal/ports/STM32/ext_lld.c \
+ ${CHIBIOS}/os/hal/ports/STM32/GPIOv2/pal_lld.c \
+ ${CHIBIOS}/os/hal/ports/STM32/I2Cv2/i2c_lld.c \
+ ${CHIBIOS}/os/hal/ports/STM32/SPIv2/spi_lld.c \
+ ${CHIBIOS}/os/hal/ports/STM32/TIMv1/gpt_lld.c \
+ ${CHIBIOS}/os/hal/ports/STM32/TIMv1/icu_lld.c \
+ ${CHIBIOS}/os/hal/ports/STM32/TIMv1/pwm_lld.c \
+ ${CHIBIOS}/os/hal/ports/STM32/TIMv1/st_lld.c \
+ ${CHIBIOS}/os/hal/ports/STM32/USARTv2/serial_lld.c \
+ ${CHIBIOS}/os/hal/ports/STM32/USARTv2/uart_lld.c \
+ ${CHIBIOS}/os/hal/ports/STM32/USBv1/usb_lld.c
+
+# Required include directories
+PLATFORMINC = ${CHIBIOS}/os/hal/ports/common/ARMCMx \
+ ${CHIBIOS}/os/hal/ports/STM32F0xx \
+ ${CHIBIOS}/os/hal/ports/STM32 \
+ ${CHIBIOS}/os/hal/ports/STM32/GPIOv2 \
+ ${CHIBIOS}/os/hal/ports/STM32/I2Cv2 \
+ ${CHIBIOS}/os/hal/ports/STM32/SPIv2 \
+ ${CHIBIOS}/os/hal/ports/STM32/TIMv1 \
+ ${CHIBIOS}/os/hal/ports/STM32/USARTv2 \
+ ${CHIBIOS}/os/hal/ports/STM32/USBv1
diff --git a/os/hal/ports/STM32/STM32F0xx/stm32_dma.c b/os/hal/ports/STM32/STM32F0xx/stm32_dma.c new file mode 100644 index 000000000..65419feba --- /dev/null +++ b/os/hal/ports/STM32/STM32F0xx/stm32_dma.c @@ -0,0 +1,291 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32F0xx/stm32_dma.c
+ * @brief DMA helper driver code.
+ *
+ * @addtogroup STM32F0xx_DMA
+ * @details DMA sharing helper driver. In the STM32 the DMA streams are a
+ * shared resource, this driver allows to allocate and free DMA
+ * streams at runtime in order to allow all the other device
+ * drivers to coordinate the access to the resource.
+ * @note The DMA ISR handlers are all declared into this module because
+ * sharing, the various device drivers can associate a callback to
+ * ISRs when allocating streams.
+ * @{
+ */
+
+#include "hal.h"
+
+/* The following macro is only defined if some driver requiring DMA services
+ has been enabled.*/
+#if defined(STM32_DMA_REQUIRED) || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver local definitions. */
+/*===========================================================================*/
+
+/**
+ * @brief Mask of the DMA1 streams in @p dma_streams_mask.
+ */
+#define STM32_DMA1_STREAMS_MASK 0x0000007F
+
+/**
+ * @brief Mask of the DMA2 streams in @p dma_streams_mask.
+ */
+#define STM32_DMA2_STREAMS_MASK 0x00000F80
+
+/**
+ * @brief Post-reset value of the stream CCR register.
+ */
+#define STM32_DMA_CCR_RESET_VALUE 0x00000000
+
+/*===========================================================================*/
+/* Driver exported variables. */
+/*===========================================================================*/
+
+/**
+ * @brief DMA streams descriptors.
+ * @details This table keeps the association between an unique stream
+ * identifier and the involved physical registers.
+ * @note Don't use this array directly, use the appropriate wrapper macros
+ * instead: @p STM32_DMA1_STREAM1, @p STM32_DMA1_STREAM2 etc.
+ */
+const stm32_dma_stream_t _stm32_dma_streams[STM32_DMA_STREAMS] = {
+ {DMA1_Channel1, &DMA1->IFCR, 0, 0, DMA1_Channel1_IRQn},
+ {DMA1_Channel2, &DMA1->IFCR, 4, 1, DMA1_Channel2_3_IRQn},
+ {DMA1_Channel3, &DMA1->IFCR, 8, 2, DMA1_Channel2_3_IRQn},
+ {DMA1_Channel4, &DMA1->IFCR, 12, 3, DMA1_Channel4_5_IRQn},
+ {DMA1_Channel5, &DMA1->IFCR, 16, 4, DMA1_Channel4_5_IRQn}
+};
+
+/*===========================================================================*/
+/* Driver local variables and types. */
+/*===========================================================================*/
+
+/**
+ * @brief DMA ISR redirector type.
+ */
+typedef struct {
+ stm32_dmaisr_t dma_func; /**< @brief DMA callback function. */
+ void *dma_param; /**< @brief DMA callback parameter. */
+} dma_isr_redir_t;
+
+/**
+ * @brief Mask of the allocated streams.
+ */
+static uint32_t dma_streams_mask;
+
+/**
+ * @brief DMA IRQ redirectors.
+ */
+static dma_isr_redir_t dma_isr_redir[STM32_DMA_STREAMS];
+
+/*===========================================================================*/
+/* Driver local functions. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver interrupt handlers. */
+/*===========================================================================*/
+
+/**
+ * @brief DMA1 stream 1 shared interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(Vector64) {
+ uint32_t flags;
+
+ OSAL_IRQ_PROLOGUE();
+
+ flags = (DMA1->ISR >> 0) & STM32_DMA_ISR_MASK;
+ DMA1->IFCR = flags << 0;
+ if (dma_isr_redir[0].dma_func)
+ dma_isr_redir[0].dma_func(dma_isr_redir[0].dma_param, flags);
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief DMA1 streams 2 and 3 shared interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(Vector68) {
+ uint32_t flags;
+
+ OSAL_IRQ_PROLOGUE();
+
+ /* Check on channel 2.*/
+ flags = (DMA1->ISR >> 4) & STM32_DMA_ISR_MASK;
+ if (flags & STM32_DMA_ISR_MASK) {
+ DMA1->IFCR = flags << 4;
+ if (dma_isr_redir[1].dma_func)
+ dma_isr_redir[1].dma_func(dma_isr_redir[1].dma_param, flags);
+ }
+
+ /* Check on channel 3.*/
+ flags = (DMA1->ISR >> 8) & STM32_DMA_ISR_MASK;
+ if (flags & STM32_DMA_ISR_MASK) {
+ DMA1->IFCR = flags << 8;
+ if (dma_isr_redir[2].dma_func)
+ dma_isr_redir[2].dma_func(dma_isr_redir[2].dma_param, flags);
+ }
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+/**
+ * @brief DMA1 streams 4 and 5 shared interrupt handler.
+ *
+ * @isr
+ */
+OSAL_IRQ_HANDLER(Vector6C) {
+ uint32_t flags;
+
+ OSAL_IRQ_PROLOGUE();
+
+ /* Check on channel 4.*/
+ flags = (DMA1->ISR >> 12) & STM32_DMA_ISR_MASK;
+ if (flags & STM32_DMA_ISR_MASK) {
+ DMA1->IFCR = flags << 12;
+ if (dma_isr_redir[3].dma_func)
+ dma_isr_redir[3].dma_func(dma_isr_redir[3].dma_param, flags);
+ }
+
+ /* Check on channel 5.*/
+ flags = (DMA1->ISR >> 16) & STM32_DMA_ISR_MASK;
+ if (flags & STM32_DMA_ISR_MASK) {
+ DMA1->IFCR = flags << 16;
+ if (dma_isr_redir[4].dma_func)
+ dma_isr_redir[4].dma_func(dma_isr_redir[4].dma_param, flags);
+ }
+
+ OSAL_IRQ_EPILOGUE();
+}
+
+/*===========================================================================*/
+/* Driver exported functions. */
+/*===========================================================================*/
+
+/**
+ * @brief STM32 DMA helper initialization.
+ *
+ * @init
+ */
+void dmaInit(void) {
+ int i;
+
+ dma_streams_mask = 0;
+ for (i = 0; i < STM32_DMA_STREAMS; i++) {
+ _stm32_dma_streams[i].channel->CCR = 0;
+ dma_isr_redir[i].dma_func = NULL;
+ }
+ DMA1->IFCR = 0xFFFFFFFF;
+}
+
+/**
+ * @brief Allocates a DMA stream.
+ * @details The stream is allocated and, if required, the DMA clock enabled.
+ * The function also enables the IRQ vector associated to the stream
+ * and initializes its priority.
+ * @pre The stream must not be already in use or an error is returned.
+ * @post The stream is allocated and the default ISR handler redirected
+ * to the specified function.
+ * @post The stream ISR vector is enabled and its priority configured.
+ * @post The stream must be freed using @p dmaStreamRelease() before it can
+ * be reused with another peripheral.
+ * @post The stream is in its post-reset state.
+ * @note This function can be invoked in both ISR or thread context.
+ *
+ * @param[in] dmastp pointer to a stm32_dma_stream_t structure
+ * @param[in] priority IRQ priority mask for the DMA stream
+ * @param[in] func handling function pointer, can be @p NULL
+ * @param[in] param a parameter to be passed to the handling function
+ * @return The operation status.
+ * @retval FALSE no error, stream taken.
+ * @retval TRUE error, stream already taken.
+ *
+ * @special
+ */
+bool dmaStreamAllocate(const stm32_dma_stream_t *dmastp,
+ uint32_t priority,
+ stm32_dmaisr_t func,
+ void *param) {
+
+ osalDbgCheck(dmastp != NULL);
+
+ /* Checks if the stream is already taken.*/
+ if ((dma_streams_mask & (1 << dmastp->selfindex)) != 0)
+ return TRUE;
+
+ /* Marks the stream as allocated.*/
+ dma_isr_redir[dmastp->selfindex].dma_func = func;
+ dma_isr_redir[dmastp->selfindex].dma_param = param;
+ dma_streams_mask |= (1 << dmastp->selfindex);
+
+ /* Enabling DMA clocks required by the current streams set.*/
+ if ((dma_streams_mask & STM32_DMA1_STREAMS_MASK) != 0)
+ rccEnableDMA1(FALSE);
+
+ /* Putting the stream in a safe state.*/
+ dmaStreamDisable(dmastp);
+ dmastp->channel->CCR = STM32_DMA_CCR_RESET_VALUE;
+
+ /* Enables the associated IRQ vector if a callback is defined.*/
+ if (func != NULL)
+ nvicEnableVector(dmastp->vector, priority);
+
+ return FALSE;
+}
+
+/**
+ * @brief Releases a DMA stream.
+ * @details The stream is freed and, if required, the DMA clock disabled.
+ * Trying to release a unallocated stream is an illegal operation
+ * and is trapped if assertions are enabled.
+ * @pre The stream must have been allocated using @p dmaStreamAllocate().
+ * @post The stream is again available.
+ * @note This function can be invoked in both ISR or thread context.
+ *
+ * @param[in] dmastp pointer to a stm32_dma_stream_t structure
+ *
+ * @special
+ */
+void dmaStreamRelease(const stm32_dma_stream_t *dmastp) {
+
+ osalDbgCheck(dmastp != NULL);
+
+ /* Check if the streams is not taken.*/
+ osalDbgAssert((dma_streams_mask & (1 << dmastp->selfindex)) != 0,
+ "not allocated");
+
+ /* Disables the associated IRQ vector.*/
+ nvicDisableVector(dmastp->vector);
+
+ /* Marks the stream as not allocated.*/
+ dma_streams_mask &= ~(1 << dmastp->selfindex);
+
+ /* Shutting down clocks that are no more required, if any.*/
+ if ((dma_streams_mask & STM32_DMA1_STREAMS_MASK) == 0)
+ rccDisableDMA1(FALSE);
+}
+
+#endif /* STM32_DMA_REQUIRED */
+
+/** @} */
diff --git a/os/hal/ports/STM32/STM32F0xx/stm32_dma.h b/os/hal/ports/STM32/STM32F0xx/stm32_dma.h new file mode 100644 index 000000000..3acff9647 --- /dev/null +++ b/os/hal/ports/STM32/STM32F0xx/stm32_dma.h @@ -0,0 +1,394 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32F0xx/stm32_dma.h
+ * @brief DMA helper driver header.
+ * @note This file requires definitions from the ST header file stm32f0xx.h.
+ * @note This driver uses the new naming convention used for the STM32F2xx
+ * so the "DMA channels" are referred as "DMA streams".
+ *
+ * @addtogroup STM32F0xx_DMA
+ * @{
+ */
+
+#ifndef _STM32_DMA_H_
+#define _STM32_DMA_H_
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @brief Total number of DMA streams.
+ * @note This is the total number of streams among all the DMA units.
+ */
+#define STM32_DMA_STREAMS 5
+
+/**
+ * @brief Mask of the ISR bits passed to the DMA callback functions.
+ */
+#define STM32_DMA_ISR_MASK 0x0F
+
+/**
+ * @brief Returns the channel associated to the specified stream.
+ *
+ * @param[in] n the stream number (0...STM32_DMA_STREAMS-1)
+ * @param[in] c a stream/channel association word, one channel per
+ * nibble, not associated channels must be set to 0xF
+ * @return Always zero, in this platform there is no dynamic
+ * association between streams and channels.
+ */
+#define STM32_DMA_GETCHANNEL(n, c) 0
+
+/**
+ * @brief Checks if a DMA priority is within the valid range.
+ * @param[in] prio DMA priority
+ *
+ * @retval The check result.
+ * @retval FALSE invalid DMA priority.
+ * @retval TRUE correct DMA priority.
+ */
+#define STM32_DMA_IS_VALID_PRIORITY(prio) (((prio) >= 0) && ((prio) <= 3))
+
+/**
+ * @brief Returns an unique numeric identifier for a DMA stream.
+ *
+ * @param[in] dma the DMA unit number
+ * @param[in] stream the stream number
+ * @return An unique numeric stream identifier.
+ */
+#define STM32_DMA_STREAM_ID(dma, stream) ((stream) - 1)
+
+/**
+ * @brief Returns a DMA stream identifier mask.
+ *
+ *
+ * @param[in] dma the DMA unit number
+ * @param[in] stream the stream number
+ * @return A DMA stream identifier mask.
+ */
+#define STM32_DMA_STREAM_ID_MSK(dma, stream) \
+ (1 << STM32_DMA_STREAM_ID(dma, stream))
+
+/**
+ * @brief Checks if a DMA stream unique identifier belongs to a mask.
+ * @param[in] id the stream numeric identifier
+ * @param[in] mask the stream numeric identifiers mask
+ *
+ * @retval The check result.
+ * @retval FALSE id does not belong to the mask.
+ * @retval TRUE id belongs to the mask.
+ */
+#define STM32_DMA_IS_VALID_ID(id, mask) (((1 << (id)) & (mask)))
+
+/**
+ * @name DMA streams identifiers
+ * @{
+ */
+/**
+ * @brief Returns a pointer to a stm32_dma_stream_t structure.
+ *
+ * @param[in] id the stream numeric identifier
+ * @return A pointer to the stm32_dma_stream_t constant structure
+ * associated to the DMA stream.
+ */
+#define STM32_DMA_STREAM(id) (&_stm32_dma_streams[id])
+
+#define STM32_DMA1_STREAM1 STM32_DMA_STREAM(0)
+#define STM32_DMA1_STREAM2 STM32_DMA_STREAM(1)
+#define STM32_DMA1_STREAM3 STM32_DMA_STREAM(2)
+#define STM32_DMA1_STREAM4 STM32_DMA_STREAM(3)
+#define STM32_DMA1_STREAM5 STM32_DMA_STREAM(4)
+/** @} */
+
+/**
+ * @name CR register constants common to all DMA types
+ * @{
+ */
+#define STM32_DMA_CR_EN DMA_CCR_EN
+#define STM32_DMA_CR_TEIE DMA_CCR_TEIE
+#define STM32_DMA_CR_HTIE DMA_CCR_HTIE
+#define STM32_DMA_CR_TCIE DMA_CCR_TCIE
+#define STM32_DMA_CR_DIR_MASK (DMA_CCR_DIR | DMA_CCR_MEM2MEM)
+#define STM32_DMA_CR_DIR_P2M 0
+#define STM32_DMA_CR_DIR_M2P DMA_CCR_DIR
+#define STM32_DMA_CR_DIR_M2M DMA_CCR_MEM2MEM
+#define STM32_DMA_CR_CIRC DMA_CCR_CIRC
+#define STM32_DMA_CR_PINC DMA_CCR_PINC
+#define STM32_DMA_CR_MINC DMA_CCR_MINC
+#define STM32_DMA_CR_PSIZE_MASK DMA_CCR_PSIZE
+#define STM32_DMA_CR_PSIZE_BYTE 0
+#define STM32_DMA_CR_PSIZE_HWORD DMA_CCR_PSIZE_0
+#define STM32_DMA_CR_PSIZE_WORD DMA_CCR_PSIZE_1
+#define STM32_DMA_CR_MSIZE_MASK DMA_CCR_MSIZE
+#define STM32_DMA_CR_MSIZE_BYTE 0
+#define STM32_DMA_CR_MSIZE_HWORD DMA_CCR_MSIZE_0
+#define STM32_DMA_CR_MSIZE_WORD DMA_CCR_MSIZE_1
+#define STM32_DMA_CR_SIZE_MASK (STM32_DMA_CR_PSIZE_MASK | \
+ STM32_DMA_CR_MSIZE_MASK)
+#define STM32_DMA_CR_PL_MASK DMA_CCR_PL
+#define STM32_DMA_CR_PL(n) ((n) << 12)
+/** @} */
+
+/**
+ * @name CR register constants only found in enhanced DMA
+ * @{
+ */
+#define STM32_DMA_CR_DMEIE 0 /**< @brief Ignored by normal DMA. */
+#define STM32_DMA_CR_CHSEL_MASK 0 /**< @brief Ignored by normal DMA. */
+#define STM32_DMA_CR_CHSEL(n) 0 /**< @brief Ignored by normal DMA. */
+/** @} */
+
+/**
+ * @name Status flags passed to the ISR callbacks
+ * @{
+ */
+#define STM32_DMA_ISR_FEIF 0
+#define STM32_DMA_ISR_DMEIF 0
+#define STM32_DMA_ISR_TEIF DMA_ISR_TEIF1
+#define STM32_DMA_ISR_HTIF DMA_ISR_HTIF1
+#define STM32_DMA_ISR_TCIF DMA_ISR_TCIF1
+/** @} */
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief STM32 DMA stream descriptor structure.
+ */
+typedef struct {
+ DMA_Channel_TypeDef *channel; /**< @brief Associated DMA channel. */
+ volatile uint32_t *ifcr; /**< @brief Associated IFCR reg. */
+ uint8_t ishift; /**< @brief Bits offset in xIFCR
+ register. */
+ uint8_t selfindex; /**< @brief Index to self in array. */
+ uint8_t vector; /**< @brief Associated IRQ vector. */
+} stm32_dma_stream_t;
+
+/**
+ * @brief STM32 DMA ISR function type.
+ *
+ * @param[in] p parameter for the registered function
+ * @param[in] flags pre-shifted content of the ISR register, the bits
+ * are aligned to bit zero
+ */
+typedef void (*stm32_dmaisr_t)(void *p, uint32_t flags);
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/**
+ * @name Macro Functions
+ * @{
+ */
+/**
+ * @brief Associates a peripheral data register to a DMA stream.
+ * @note This function can be invoked in both ISR or thread context.
+ * @pre The stream must have been allocated using @p dmaStreamAllocate().
+ * @post After use the stream can be released using @p dmaStreamRelease().
+ *
+ * @param[in] dmastp pointer to a stm32_dma_stream_t structure
+ * @param[in] addr value to be written in the CPAR register
+ *
+ * @special
+ */
+#define dmaStreamSetPeripheral(dmastp, addr) { \
+ (dmastp)->channel->CPAR = (uint32_t)(addr); \
+}
+
+/**
+ * @brief Associates a memory destination to a DMA stream.
+ * @note This function can be invoked in both ISR or thread context.
+ * @pre The stream must have been allocated using @p dmaStreamAllocate().
+ * @post After use the stream can be released using @p dmaStreamRelease().
+ *
+ * @param[in] dmastp pointer to a stm32_dma_stream_t structure
+ * @param[in] addr value to be written in the CMAR register
+ *
+ * @special
+ */
+#define dmaStreamSetMemory0(dmastp, addr) { \
+ (dmastp)->channel->CMAR = (uint32_t)(addr); \
+}
+
+/**
+ * @brief Sets the number of transfers to be performed.
+ * @note This function can be invoked in both ISR or thread context.
+ * @pre The stream must have been allocated using @p dmaStreamAllocate().
+ * @post After use the stream can be released using @p dmaStreamRelease().
+ *
+ * @param[in] dmastp pointer to a stm32_dma_stream_t structure
+ * @param[in] size value to be written in the CNDTR register
+ *
+ * @special
+ */
+#define dmaStreamSetTransactionSize(dmastp, size) { \
+ (dmastp)->channel->CNDTR = (uint32_t)(size); \
+}
+
+/**
+ * @brief Returns the number of transfers to be performed.
+ * @note This function can be invoked in both ISR or thread context.
+ * @pre The stream must have been allocated using @p dmaStreamAllocate().
+ * @post After use the stream can be released using @p dmaStreamRelease().
+ *
+ * @param[in] dmastp pointer to a stm32_dma_stream_t structure
+ * @return The number of transfers to be performed.
+ *
+ * @special
+ */
+#define dmaStreamGetTransactionSize(dmastp) ((size_t)((dmastp)->channel->CNDTR))
+
+/**
+ * @brief Programs the stream mode settings.
+ * @note This function can be invoked in both ISR or thread context.
+ * @pre The stream must have been allocated using @p dmaStreamAllocate().
+ * @post After use the stream can be released using @p dmaStreamRelease().
+ *
+ * @param[in] dmastp pointer to a stm32_dma_stream_t structure
+ * @param[in] mode value to be written in the CCR register
+ *
+ * @special
+ */
+#define dmaStreamSetMode(dmastp, mode) { \
+ (dmastp)->channel->CCR = (uint32_t)(mode); \
+}
+
+/**
+ * @brief DMA stream enable.
+ * @note This function can be invoked in both ISR or thread context.
+ * @pre The stream must have been allocated using @p dmaStreamAllocate().
+ * @post After use the stream can be released using @p dmaStreamRelease().
+ *
+ * @param[in] dmastp pointer to a stm32_dma_stream_t structure
+ *
+ * @special
+ */
+#define dmaStreamEnable(dmastp) { \
+ (dmastp)->channel->CCR |= STM32_DMA_CR_EN; \
+}
+
+/**
+ * @brief DMA stream disable.
+ * @details The function disables the specified stream and then clears any
+ * pending interrupt.
+ * @note This function can be invoked in both ISR or thread context.
+ * @note Interrupts enabling flags are set to zero after this call, see
+ * bug 3607518.
+ * @pre The stream must have been allocated using @p dmaStreamAllocate().
+ * @post After use the stream can be released using @p dmaStreamRelease().
+ *
+ * @param[in] dmastp pointer to a stm32_dma_stream_t structure
+ *
+ * @special
+ */
+#define dmaStreamDisable(dmastp) { \
+ (dmastp)->channel->CCR &= ~(STM32_DMA_CR_TCIE | STM32_DMA_CR_HTIE | \
+ STM32_DMA_CR_TEIE | STM32_DMA_CR_EN); \
+ dmaStreamClearInterrupt(dmastp); \
+}
+
+/**
+ * @brief DMA stream interrupt sources clear.
+ * @note This function can be invoked in both ISR or thread context.
+ * @pre The stream must have been allocated using @p dmaStreamAllocate().
+ * @post After use the stream can be released using @p dmaStreamRelease().
+ *
+ * @param[in] dmastp pointer to a stm32_dma_stream_t structure
+ *
+ * @special
+ */
+#define dmaStreamClearInterrupt(dmastp) { \
+ *(dmastp)->ifcr = STM32_DMA_ISR_MASK << (dmastp)->ishift; \
+}
+
+/**
+ * @brief Starts a memory to memory operation using the specified stream.
+ * @note The default transfer data mode is "byte to byte" but it can be
+ * changed by specifying extra options in the @p mode parameter.
+ * @pre The stream must have been allocated using @p dmaStreamAllocate().
+ * @post After use the stream can be released using @p dmaStreamRelease().
+ *
+ * @param[in] dmastp pointer to a stm32_dma_stream_t structure
+ * @param[in] mode value to be written in the CCR register, this value
+ * is implicitly ORed with:
+ * - @p STM32_DMA_CR_MINC
+ * - @p STM32_DMA_CR_PINC
+ * - @p STM32_DMA_CR_DIR_M2M
+ * - @p STM32_DMA_CR_EN
+ * .
+ * @param[in] src source address
+ * @param[in] dst destination address
+ * @param[in] n number of data units to copy
+ */
+#define dmaStartMemCopy(dmastp, mode, src, dst, n) { \
+ dmaStreamSetPeripheral(dmastp, src); \
+ dmaStreamSetMemory0(dmastp, dst); \
+ dmaStreamSetTransactionSize(dmastp, n); \
+ dmaStreamSetMode(dmastp, (mode) | \
+ STM32_DMA_CR_MINC | STM32_DMA_CR_PINC | \
+ STM32_DMA_CR_DIR_M2M | STM32_DMA_CR_EN); \
+}
+
+/**
+ * @brief Polled wait for DMA transfer end.
+ * @pre The stream must have been allocated using @p dmaStreamAllocate().
+ * @post After use the stream can be released using @p dmaStreamRelease().
+ *
+ * @param[in] dmastp pointer to a stm32_dma_stream_t structure
+ */
+#define dmaWaitCompletion(dmastp) { \
+ while ((dmastp)->channel->CNDTR > 0) \
+ ; \
+ dmaStreamDisable(dmastp); \
+}
+/** @} */
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if !defined(__DOXYGEN__)
+extern const stm32_dma_stream_t _stm32_dma_streams[STM32_DMA_STREAMS];
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void dmaInit(void);
+ bool dmaStreamAllocate(const stm32_dma_stream_t *dmastp,
+ uint32_t priority,
+ stm32_dmaisr_t func,
+ void *param);
+ void dmaStreamRelease(const stm32_dma_stream_t *dmastp);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _STM32_DMA_H_ */
+
+/** @} */
diff --git a/os/hal/ports/STM32/STM32F0xx/stm32_isr.h b/os/hal/ports/STM32/STM32F0xx/stm32_isr.h new file mode 100644 index 000000000..52421a4d5 --- /dev/null +++ b/os/hal/ports/STM32/STM32F0xx/stm32_isr.h @@ -0,0 +1,91 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32F0xx/stm32_isr.h
+ * @brief ISR remapper driver header.
+ *
+ * @addtogroup STM32F0xx_ISR
+ * @{
+ */
+
+#ifndef _STM32_ISR_H_
+#define _STM32_ISR_H_
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @name ISR names and numbers remapping
+ * @{
+ */
+
+/*
+ * I2C units.
+ */
+#define STM32_I2C1_GLOBAL_HANDLER Vector9C
+#define STM32_I2C1_GLOBAL_NUMBER 23
+
+#define STM32_I2C2_GLOBAL_HANDLER VectorA0
+#define STM32_I2C2_GLOBAL_NUMBER 24
+
+/*
+ * TIM units.
+ */
+#define STM32_TIM1_UP_HANDLER Vector74
+#define STM32_TIM1_CC_HANDLER Vector78
+#define STM32_TIM2_HANDLER Vector7C
+#define STM32_TIM3_HANDLER Vector80
+
+#define STM32_TIM1_UP_NUMBER 13
+#define STM32_TIM1_CC_NUMBER 14
+#define STM32_TIM2_NUMBER 15
+#define STM32_TIM3_NUMBER 16
+
+/*
+ * USART units.
+ */
+#define STM32_USART1_HANDLER VectorAC
+#define STM32_USART2_HANDLER VectorB0
+
+#define STM32_USART1_NUMBER 27
+#define STM32_USART2_NUMBER 28
+/** @} */
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#endif /* _STM32_ISR_H_ */
+
+/** @} */
diff --git a/os/hal/ports/STM32/STM32F0xx/stm32_rcc.h b/os/hal/ports/STM32/STM32F0xx/stm32_rcc.h new file mode 100644 index 000000000..88e47f2c0 --- /dev/null +++ b/os/hal/ports/STM32/STM32F0xx/stm32_rcc.h @@ -0,0 +1,596 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32F0xx/stm32_rcc.h
+ * @brief RCC helper driver header.
+ * @note This file requires definitions from the ST header file
+ * @p stm32f0xx.h.
+ *
+ * @addtogroup STM32F0xx_RCC
+ * @{
+ */
+
+#ifndef _STM32_RCC_
+#define _STM32_RCC_
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/**
+ * @name Generic RCC operations
+ * @{
+ */
+/**
+ * @brief Enables the clock of one or more peripheral on the APB1 bus.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] mask APB1 peripherals mask
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableAPB1(mask, lp) { \
+ RCC->APB1ENR |= (mask); \
+}
+
+/**
+ * @brief Disables the clock of one or more peripheral on the APB1 bus.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] mask APB1 peripherals mask
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableAPB1(mask, lp) { \
+ RCC->APB1ENR &= ~(mask); \
+}
+
+/**
+ * @brief Resets one or more peripheral on the APB1 bus.
+ *
+ * @param[in] mask APB1 peripherals mask
+ *
+ * @api
+ */
+#define rccResetAPB1(mask) { \
+ RCC->APB1RSTR |= (mask); \
+ RCC->APB1RSTR = 0; \
+}
+
+/**
+ * @brief Enables the clock of one or more peripheral on the APB2 bus.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] mask APB2 peripherals mask
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableAPB2(mask, lp) { \
+ RCC->APB2ENR |= (mask); \
+}
+
+/**
+ * @brief Disables the clock of one or more peripheral on the APB2 bus.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] mask APB2 peripherals mask
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableAPB2(mask, lp) { \
+ RCC->APB2ENR &= ~(mask); \
+}
+
+/**
+ * @brief Resets one or more peripheral on the APB2 bus.
+ *
+ * @param[in] mask APB2 peripherals mask
+ *
+ * @api
+ */
+#define rccResetAPB2(mask) { \
+ RCC->APB2RSTR |= (mask); \
+ RCC->APB2RSTR = 0; \
+}
+
+/**
+ * @brief Enables the clock of one or more peripheral on the AHB bus.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] mask AHB peripherals mask
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableAHB(mask, lp) { \
+ RCC->AHBENR |= (mask); \
+}
+
+/**
+ * @brief Disables the clock of one or more peripheral on the AHB bus.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] mask AHB peripherals mask
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableAHB(mask, lp) { \
+ RCC->AHBENR &= ~(mask); \
+}
+
+/**
+ * @brief Resets one or more peripheral on the AHB bus.
+ *
+ * @param[in] mask AHB peripherals mask
+ *
+ * @api
+ */
+#define rccResetAHB(mask) { \
+ RCC->AHBRSTR |= (mask); \
+ RCC->AHBRSTR = 0; \
+}
+/** @} */
+
+/**
+ * @name ADC peripherals specific RCC operations
+ * @{
+ */
+/**
+ * @brief Enables the ADC1 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableADC1(lp) rccEnableAPB2(RCC_APB2ENR_ADC1EN, lp)
+
+/**
+ * @brief Disables the ADC1 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableADC1(lp) rccDisableAPB2(RCC_APB2ENR_ADC1EN, lp)
+
+/**
+ * @brief Resets the ADC1 peripheral.
+ *
+ * @api
+ */
+#define rccResetADC1() rccResetAPB2(RCC_APB2RSTR_ADC1RST)
+/** @} */
+
+/**
+ * @name PWR interface specific RCC operations
+ * @{
+ */
+/**
+ * @brief Enables the PWR interface clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnablePWRInterface(lp) rccEnableAPB1(RCC_APB1ENR_PWREN, lp)
+
+/**
+ * @brief Disables PWR interface clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisablePWRInterface(lp) rccDisableAPB1(RCC_APB1ENR_PWREN, lp)
+
+/**
+ * @brief Resets the PWR interface.
+ *
+ * @api
+ */
+#define rccResetPWRInterface() rccResetAPB1(RCC_APB1RSTR_PWRRST)
+/** @} */
+
+/**
+ * @name DMA peripherals specific RCC operations
+ * @{
+ */
+/**
+ * @brief Enables the DMA1 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableDMA1(lp) rccEnableAHB(RCC_AHBENR_DMA1EN, lp)
+
+/**
+ * @brief Disables the DMA1 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableDMA1(lp) rccDisableAHB(RCC_AHBENR_DMA1EN, lp)
+
+/**
+ * @brief Resets the DMA1 peripheral.
+ * @note Not supported in this family, does nothing.
+ *
+ * @api
+ */
+#define rccResetDMA1()
+/** @} */
+
+/**
+ * @name I2C peripherals specific RCC operations
+ * @{
+ */
+/**
+ * @brief Enables the I2C1 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableI2C1(lp) rccEnableAPB1(RCC_APB1ENR_I2C1EN, lp)
+
+/**
+ * @brief Disables the I2C1 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableI2C1(lp) rccDisableAPB1(RCC_APB1ENR_I2C1EN, lp)
+
+/**
+ * @brief Resets the I2C1 peripheral.
+ *
+ * @api
+ */
+#define rccResetI2C1() rccResetAPB1(RCC_APB1RSTR_I2C1RST)
+
+/**
+ * @brief Enables the I2C2 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableI2C2(lp) rccEnableAPB1(RCC_APB1ENR_I2C2EN, lp)
+
+/**
+ * @brief Disables the I2C2 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableI2C2(lp) rccDisableAPB1(RCC_APB1ENR_I2C2EN, lp)
+
+/**
+ * @brief Resets the I2C2 peripheral.
+ *
+ * @api
+ */
+#define rccResetI2C2() rccResetAPB1(RCC_APB1RSTR_I2C2RST)
+/** @} */
+
+/**
+ * @name SPI peripherals specific RCC operations
+ * @{
+ */
+/**
+ * @brief Enables the SPI1 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableSPI1(lp) rccEnableAPB2(RCC_APB2ENR_SPI1EN, lp)
+
+/**
+ * @brief Disables the SPI1 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableSPI1(lp) rccDisableAPB2(RCC_APB2ENR_SPI1EN, lp)
+
+/**
+ * @brief Resets the SPI1 peripheral.
+ *
+ * @api
+ */
+#define rccResetSPI1() rccResetAPB2(RCC_APB2RSTR_SPI1RST)
+
+/**
+ * @brief Enables the SPI2 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableSPI2(lp) rccEnableAPB1(RCC_APB1ENR_SPI2EN, lp)
+
+/**
+ * @brief Disables the SPI2 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableSPI2(lp) rccDisableAPB1(RCC_APB1ENR_SPI2EN, lp)
+
+/**
+ * @brief Resets the SPI2 peripheral.
+ *
+ * @api
+ */
+#define rccResetSPI2() rccResetAPB1(RCC_APB1RSTR_SPI2RST)
+/** @} */
+
+/**
+ * @name TIM peripherals specific RCC operations
+ * @{
+ */
+/**
+ * @brief Enables the TIM1 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableTIM1(lp) rccEnableAPB2(RCC_APB2ENR_TIM1EN, lp)
+
+/**
+ * @brief Disables the TIM1 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableTIM1(lp) rccDisableAPB2(RCC_APB2ENR_TIM1EN, lp)
+
+/**
+ * @brief Resets the TIM1 peripheral.
+ *
+ * @api
+ */
+#define rccResetTIM1() rccResetAPB2(RCC_APB2RSTR_TIM1RST)
+
+/**
+ * @brief Enables the TIM2 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableTIM2(lp) rccEnableAPB1(RCC_APB1ENR_TIM2EN, lp)
+
+/**
+ * @brief Disables the TIM2 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableTIM2(lp) rccDisableAPB1(RCC_APB1ENR_TIM2EN, lp)
+
+/**
+ * @brief Resets the TIM2 peripheral.
+ *
+ * @api
+ */
+#define rccResetTIM2() rccResetAPB1(RCC_APB1RSTR_TIM2RST)
+
+/**
+ * @brief Enables the TIM3 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableTIM3(lp) rccEnableAPB1(RCC_APB1ENR_TIM3EN, lp)
+
+/**
+ * @brief Disables the TIM3 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableTIM3(lp) rccDisableAPB1(RCC_APB1ENR_TIM3EN, lp)
+
+/**
+ * @brief Resets the TIM3 peripheral.
+ *
+ * @api
+ */
+#define rccResetTIM3() rccResetAPB1(RCC_APB1RSTR_TIM3RST)
+/** @} */
+
+/**
+ * @name USART/UART peripherals specific RCC operations
+ * @{
+ */
+/**
+ * @brief Enables the USART1 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableUSART1(lp) rccEnableAPB2(RCC_APB2ENR_USART1EN, lp)
+
+/**
+ * @brief Disables the USART1 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableUSART1(lp) rccDisableAPB2(RCC_APB2ENR_USART1EN, lp)
+
+/**
+ * @brief Resets the USART1 peripheral.
+ *
+ * @api
+ */
+#define rccResetUSART1() rccResetAPB2(RCC_APB2RSTR_USART1RST)
+
+/**
+ * @brief Enables the USART2 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableUSART2(lp) rccEnableAPB1(RCC_APB1ENR_USART2EN, lp)
+
+/**
+ * @brief Disables the USART2 peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableUSART2(lp) rccDisableAPB1(RCC_APB1ENR_USART2EN, lp)
+
+/**
+ * @brief Resets the USART2 peripheral.
+ *
+ * @api
+ */
+#define rccResetUSART2() rccResetAPB1(RCC_APB1RSTR_USART2RST)
+
+/**
+ * @brief Enables the CRC peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableCRC(lp) rccEnableAHB(RCC_AHBENR_CRCEN, lp)
+
+/**
+ * @brief Disables the CRC peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableCRC(lp) rccDisableAHB(RCC_AHBENR_CRCEN, lp)
+
+/**
+ * @brief Resets the CRC peripheral.
+ *
+ * @api
+ */
+#define rccResetCRC() rccResetAHB(RCC_AHBRSTR_CRCRST)
+
+/**
+ * @brief Enables the WWDG peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccEnableWWDG(lp) rccEnableAPB1(RCC_APB1ENR_WWDGEN, lp)
+
+/**
+ * @brief Disables the WWDG peripheral clock.
+ * @note The @p lp parameter is ignored in this family.
+ *
+ * @param[in] lp low power enable flag
+ *
+ * @api
+ */
+#define rccDisableWWDG(lp) rccDisableAPB1(RCC_APB1ENR_WWDGEN, lp)
+
+/**
+ * @brief Resets the WWDG peripheral.
+ *
+ * @api
+ */
+#define rccResetWWDG() rccResetAPB1(RCC_APB1RSTR_WWDGRST)
+/** @} */
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _STM32_RCC_ */
+
+/** @} */
diff --git a/os/hal/ports/STM32/STM32F0xx/stm32_registry.h b/os/hal/ports/STM32/STM32F0xx/stm32_registry.h new file mode 100644 index 000000000..4f738859b --- /dev/null +++ b/os/hal/ports/STM32/STM32F0xx/stm32_registry.h @@ -0,0 +1,426 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32F0xx/stm32_registry.h
+ * @brief STM32F0xx capabilities registry.
+ *
+ * @addtogroup HAL
+ * @{
+ */
+
+#ifndef _STM32_REGISTRY_H_
+#define _STM32_REGISTRY_H_
+
+/*===========================================================================*/
+/* Platform capabilities. */
+/*===========================================================================*/
+
+/**
+ * @name STM32F0xx capabilities
+ * @{
+ */
+#if defined(STM32F0XX_MD) || defined(__DOXYGEN__)
+
+/* ADC attributes.*/
+#define STM32_HAS_ADC1 TRUE
+#define STM32_HAS_ADC2 FALSE
+#define STM32_HAS_ADC3 FALSE
+#define STM32_HAS_ADC4 FALSE
+
+/* CAN attributes.*/
+#define STM32_HAS_CAN1 FALSE
+#define STM32_HAS_CAN2 FALSE
+
+/* DAC attributes.*/
+#define STM32_HAS_DAC TRUE
+
+/* DMA attributes.*/
+#define STM32_ADVANCED_DMA FALSE
+#define STM32_HAS_DMA1 TRUE
+#define STM32_HAS_DMA2 FALSE
+
+/* ETH attributes.*/
+#define STM32_HAS_ETH FALSE
+
+/* EXTI attributes.*/
+#define STM32_EXTI_NUM_CHANNELS 28
+
+/* GPIO attributes.*/
+#define STM32_HAS_GPIOA TRUE
+#define STM32_HAS_GPIOB TRUE
+#define STM32_HAS_GPIOC TRUE
+#define STM32_HAS_GPIOD TRUE
+#define STM32_HAS_GPIOE FALSE
+#define STM32_HAS_GPIOF TRUE
+#define STM32_HAS_GPIOG FALSE
+#define STM32_HAS_GPIOH FALSE
+#define STM32_HAS_GPIOI FALSE
+
+/* I2C attributes.*/
+#define STM32_HAS_I2C1 TRUE
+#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+
+#define STM32_HAS_I2C2 TRUE
+#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+
+#define STM32_HAS_I2C3 FALSE
+
+/* RTC attributes.*/
+#define STM32_HAS_RTC TRUE
+#define STM32_RTC_HAS_SUBSECONDS FALSE
+#define STM32_RTC_IS_CALENDAR TRUE
+
+/* SDIO attributes.*/
+#define STM32_HAS_SDIO FALSE
+
+/* SPI attributes.*/
+#define STM32_HAS_SPI1 TRUE
+#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+
+#define STM32_HAS_SPI2 TRUE
+#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+
+#define STM32_HAS_SPI3 FALSE
+#define STM32_HAS_SPI4 FALSE
+#define STM32_HAS_SPI5 FALSE
+#define STM32_HAS_SPI6 FALSE
+
+/* TIM attributes.*/
+#define STM32_HAS_TIM1 TRUE
+#define STM32_TIM1_IS_32BITS FALSE
+#define STM32_TIM1_CHANNELS 4
+
+#define STM32_HAS_TIM2 TRUE
+#define STM32_TIM2_IS_32BITS TRUE
+#define STM32_TIM2_CHANNELS 4
+
+#define STM32_HAS_TIM3 TRUE
+#define STM32_TIM3_IS_32BITS FALSE
+#define STM32_TIM3_CHANNELS 4
+
+#define STM32_HAS_TIM6 TRUE
+#define STM32_TIM6_IS_32BITS FALSE
+#define STM32_TIM6_CHANNELS 0
+
+#define STM32_HAS_TIM14 TRUE
+#define STM32_TIM14_IS_32BITS FALSE
+#define STM32_TIM14_CHANNELS 1
+
+#define STM32_HAS_TIM15 TRUE
+#define STM32_TIM15_IS_32BITS FALSE
+#define STM32_TIM15_CHANNELS 2
+
+#define STM32_HAS_TIM16 TRUE
+#define STM32_TIM16_IS_32BITS FALSE
+#define STM32_TIM16_CHANNELS 2
+
+#define STM32_HAS_TIM17 TRUE
+#define STM32_TIM17_IS_32BITS FALSE
+#define STM32_TIM17_CHANNELS 2
+
+#define STM32_HAS_TIM4 FALSE
+#define STM32_HAS_TIM5 FALSE
+#define STM32_HAS_TIM7 FALSE
+#define STM32_HAS_TIM8 FALSE
+#define STM32_HAS_TIM9 FALSE
+#define STM32_HAS_TIM10 FALSE
+#define STM32_HAS_TIM11 FALSE
+#define STM32_HAS_TIM12 FALSE
+#define STM32_HAS_TIM13 FALSE
+#define STM32_HAS_TIM18 FALSE
+#define STM32_HAS_TIM19 FALSE
+
+/* USART attributes.*/
+#define STM32_HAS_USART1 TRUE
+#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+
+#define STM32_HAS_USART2 TRUE
+#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+
+#define STM32_HAS_USART3 FALSE
+#define STM32_HAS_UART4 FALSE
+#define STM32_HAS_UART5 FALSE
+#define STM32_HAS_USART6 FALSE
+
+/* USB attributes.*/
+#define STM32_HAS_USB TRUE
+#define STM32_HAS_OTG1 FALSE
+#define STM32_HAS_OTG2 FALSE
+
+#elif defined(STM32F0XX_LD)
+
+/* ADC attributes.*/
+#define STM32_HAS_ADC1 TRUE
+#define STM32_HAS_ADC2 FALSE
+#define STM32_HAS_ADC3 FALSE
+#define STM32_HAS_ADC4 FALSE
+
+/* CAN attributes.*/
+#define STM32_HAS_CAN1 FALSE
+#define STM32_HAS_CAN2 FALSE
+
+/* DAC attributes.*/
+#define STM32_HAS_DAC FALSE
+
+/* DMA attributes.*/
+#define STM32_ADVANCED_DMA FALSE
+#define STM32_HAS_DMA1 TRUE
+#define STM32_HAS_DMA2 FALSE
+
+/* ETH attributes.*/
+#define STM32_HAS_ETH FALSE
+
+/* EXTI attributes.*/
+#define STM32_EXTI_NUM_CHANNELS 28
+
+/* GPIO attributes.*/
+#define STM32_HAS_GPIOA TRUE
+#define STM32_HAS_GPIOB TRUE
+#define STM32_HAS_GPIOC TRUE
+#define STM32_HAS_GPIOD FALSE
+#define STM32_HAS_GPIOE FALSE
+#define STM32_HAS_GPIOF TRUE
+#define STM32_HAS_GPIOG FALSE
+#define STM32_HAS_GPIOH FALSE
+#define STM32_HAS_GPIOI FALSE
+
+/* I2C attributes.*/
+#define STM32_HAS_I2C1 TRUE
+#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+
+#define STM32_HAS_I2C2 FALSE
+#define STM32_HAS_I2C3 FALSE
+
+/* RTC attributes.*/
+#define STM32_HAS_RTC TRUE
+#define STM32_RTC_HAS_SUBSECONDS FALSE
+#define STM32_RTC_IS_CALENDAR TRUE
+
+/* SDIO attributes.*/
+#define STM32_HAS_SDIO FALSE
+
+/* SPI attributes.*/
+#define STM32_HAS_SPI1 TRUE
+#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+
+#define STM32_HAS_SPI2 FALSE
+#define STM32_HAS_SPI3 FALSE
+#define STM32_HAS_SPI4 FALSE
+#define STM32_HAS_SPI5 FALSE
+#define STM32_HAS_SPI6 FALSE
+
+/* TIM attributes.*/
+#define STM32_HAS_TIM1 TRUE
+#define STM32_TIM1_IS_32BITS FALSE
+#define STM32_TIM1_CHANNELS 4
+
+#define STM32_HAS_TIM2 TRUE
+#define STM32_TIM2_IS_32BITS TRUE
+#define STM32_TIM2_CHANNELS 4
+
+#define STM32_HAS_TIM3 TRUE
+#define STM32_TIM3_IS_32BITS FALSE
+#define STM32_TIM3_CHANNELS 4
+
+#define STM32_HAS_TIM14 TRUE
+#define STM32_TIM14_IS_32BITS FALSE
+#define STM32_TIM14_CHANNELS 1
+
+#define STM32_HAS_TIM16 TRUE
+#define STM32_TIM16_IS_32BITS FALSE
+#define STM32_TIM16_CHANNELS 2
+
+#define STM32_HAS_TIM17 TRUE
+#define STM32_TIM17_IS_32BITS FALSE
+#define STM32_TIM17_CHANNELS 2
+
+#define STM32_HAS_TIM4 FALSE
+#define STM32_HAS_TIM5 FALSE
+#define STM32_HAS_TIM6 FALSE
+#define STM32_HAS_TIM7 FALSE
+#define STM32_HAS_TIM8 FALSE
+#define STM32_HAS_TIM9 FALSE
+#define STM32_HAS_TIM10 FALSE
+#define STM32_HAS_TIM11 FALSE
+#define STM32_HAS_TIM12 FALSE
+#define STM32_HAS_TIM13 FALSE
+#define STM32_HAS_TIM15 FALSE
+#define STM32_HAS_TIM18 FALSE
+#define STM32_HAS_TIM19 FALSE
+
+/* USART attributes.*/
+#define STM32_HAS_USART1 TRUE
+#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+
+#define STM32_HAS_USART2 FALSE
+#define STM32_HAS_USART3 FALSE
+#define STM32_HAS_UART4 FALSE
+#define STM32_HAS_UART5 FALSE
+#define STM32_HAS_USART6 FALSE
+
+/* USB attributes.*/
+#define STM32_HAS_USB FALSE
+#define STM32_HAS_OTG1 FALSE
+#define STM32_HAS_OTG2 FALSE
+
+#else /* STM32F030 */
+
+/* ADC attributes.*/
+#define STM32_HAS_ADC1 TRUE
+#define STM32_HAS_ADC2 FALSE
+#define STM32_HAS_ADC3 FALSE
+#define STM32_HAS_ADC4 FALSE
+
+/* CAN attributes.*/
+#define STM32_HAS_CAN1 FALSE
+#define STM32_HAS_CAN2 FALSE
+
+/* DAC attributes.*/
+#define STM32_HAS_DAC FALSE
+
+/* DMA attributes.*/
+#define STM32_ADVANCED_DMA FALSE
+#define STM32_HAS_DMA1 TRUE
+#define STM32_HAS_DMA2 FALSE
+
+/* ETH attributes.*/
+#define STM32_HAS_ETH FALSE
+
+/* EXTI attributes.*/
+#define STM32_EXTI_NUM_CHANNELS 28
+
+/* GPIO attributes.*/
+#define STM32_HAS_GPIOA TRUE
+#define STM32_HAS_GPIOB TRUE
+#define STM32_HAS_GPIOC TRUE
+#define STM32_HAS_GPIOD TRUE
+#define STM32_HAS_GPIOE FALSE
+#define STM32_HAS_GPIOF TRUE
+#define STM32_HAS_GPIOG FALSE
+#define STM32_HAS_GPIOH FALSE
+#define STM32_HAS_GPIOI FALSE
+
+/* I2C attributes.*/
+#define STM32_HAS_I2C1 TRUE
+#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+
+#define STM32_HAS_I2C2 TRUE
+#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+
+#define STM32_HAS_I2C3 FALSE
+
+/* RTC attributes.*/
+#define STM32_HAS_RTC TRUE
+#define STM32_RTC_HAS_SUBSECONDS FALSE
+#define STM32_RTC_IS_CALENDAR TRUE
+
+/* SDIO attributes.*/
+#define STM32_HAS_SDIO FALSE
+
+/* SPI attributes.*/
+#define STM32_HAS_SPI1 TRUE
+#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+
+#define STM32_HAS_SPI2 TRUE
+#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+
+#define STM32_HAS_SPI3 FALSE
+#define STM32_HAS_SPI4 FALSE
+#define STM32_HAS_SPI5 FALSE
+#define STM32_HAS_SPI6 FALSE
+
+/* TIM attributes.*/
+#define STM32_HAS_TIM1 TRUE
+#define STM32_TIM1_IS_32BITS FALSE
+#define STM32_TIM1_CHANNELS 4
+
+#define STM32_HAS_TIM3 TRUE
+#define STM32_TIM3_IS_32BITS FALSE
+#define STM32_TIM3_CHANNELS 4
+
+#define STM32_HAS_TIM6 TRUE
+#define STM32_TIM6_IS_32BITS FALSE
+#define STM32_TIM6_CHANNELS 0
+
+#define STM32_HAS_TIM14 TRUE
+#define STM32_TIM14_IS_32BITS FALSE
+#define STM32_TIM14_CHANNELS 1
+
+#define STM32_HAS_TIM15 TRUE
+#define STM32_TIM15_IS_32BITS FALSE
+#define STM32_TIM15_CHANNELS 2
+
+#define STM32_HAS_TIM16 TRUE
+#define STM32_TIM16_IS_32BITS FALSE
+#define STM32_TIM16_CHANNELS 2
+
+#define STM32_HAS_TIM17 TRUE
+#define STM32_TIM17_IS_32BITS FALSE
+#define STM32_TIM17_CHANNELS 2
+
+#define STM32_HAS_TIM2 FALSE
+#define STM32_HAS_TIM4 FALSE
+#define STM32_HAS_TIM5 FALSE
+#define STM32_HAS_TIM7 FALSE
+#define STM32_HAS_TIM8 FALSE
+#define STM32_HAS_TIM9 FALSE
+#define STM32_HAS_TIM10 FALSE
+#define STM32_HAS_TIM11 FALSE
+#define STM32_HAS_TIM12 FALSE
+#define STM32_HAS_TIM13 FALSE
+#define STM32_HAS_TIM18 FALSE
+#define STM32_HAS_TIM19 FALSE
+
+/* USART attributes.*/
+#define STM32_HAS_USART1 TRUE
+#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
+
+#define STM32_HAS_USART2 TRUE
+#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
+
+#define STM32_HAS_USART3 FALSE
+#define STM32_HAS_UART4 FALSE
+#define STM32_HAS_UART5 FALSE
+#define STM32_HAS_USART6 FALSE
+
+/* USB attributes.*/
+#define STM32_HAS_USB FALSE
+#define STM32_HAS_OTG1 FALSE
+#define STM32_HAS_OTG2 FALSE
+
+#endif /* STM32F030 */
+
+/** @} */
+
+#endif /* _STM32_REGISTRY_H_ */
+
+/** @} */
|